| Age | Commit message (Collapse) | Author |
|---|
|
commit 95f1fda47c9d8738f858c3861add7bf0a36a7c0b upstream.
Quota does not get enabled for read-only mounts if filesystem
has quota feature, so that quotas cannot updated during orphan
cleanup, which will lead to quota inconsistency.
This patch turn on quotas during orphan cleanup for this case,
make sure quotas can be updated correctly.
Reported-by: Jan Kara <jack@suse.cz>
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b0a5a9589decd07db755d6a8d9c0910d96ff7992 upstream.
Current ext4 quota should always "usage enabled" if the
quota feautre is enabled. But in ext4_orphan_cleanup(), it
turn quotas off directly (used for the older journaled
quota), so we cannot turn it on again via "quotaon" unless
umount and remount ext4.
Simple reproduce:
mkfs.ext4 -O project,quota /dev/vdb1
mount -o prjquota /dev/vdb1 /mnt
chattr -p 123 /mnt
chattr +P /mnt
touch /mnt/aa /mnt/bb
exec 100<>/mnt/aa
rm -f /mnt/aa
sync
echo c > /proc/sysrq-trigger
#reboot and mount
mount -o prjquota /dev/vdb1 /mnt
#query status
quotaon -Ppv /dev/vdb1
#output
quotaon: Cannot find mountpoint for device /dev/vdb1
quotaon: No correct mountpoint specified.
This patch add check for journaled quotas to avoid incorrect
quotaoff when ext4 has quota feautre.
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b5accbb0dfae36d8d36cd882096943c98d5ede15 upstream.
When new directory 'DIR1' is created in a directory 'DIR0' with SGID bit
set, DIR1 is expected to have SGID bit set (and owning group equal to
the owning group of 'DIR0'). However when 'DIR0' also has some default
ACLs that 'DIR1' inherits, setting these ACLs will result in SGID bit on
'DIR1' to get cleared if user is not member of the owning group.
Fix the problem by creating __orangefs_set_acl() function that does not
call posix_acl_update_mode() and use it when inheriting ACLs. That
prevents SGID bit clearing and the mode has been properly set by
posix_acl_create() anyway.
Fixes: 073931017b49d9458aa351605b43a7e34598caef
CC: stable@vger.kernel.org
CC: Mike Marshall <hubcap@omnibond.com>
CC: pvfs2-developers@beowulf-underground.org
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ed6473ddc704a2005b9900ca08e236ebb2d8540a upstream.
We want to use kthread_stop() in order to ensure the threads are
shut down before we tear down the nfs_callback_info in nfs_callback_down.
Tested-and-reviewed-by: Kinglong Mee <kinglongmee@gmail.com>
Reported-by: Kinglong Mee <kinglongmee@gmail.com>
Fixes: bb6aeba736ba9 ("NFSv4.x: Switch to using svc_set_num_threads()...")
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Cc: Jan Hudoba <kernel@jahu.sk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7bf7a193a90cadccaad21c5970435c665c40fe27 upstream.
Fix up all the compiler warnings that have crept in.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6c370590cfe0c36bcd62d548148aa65c984540b7 upstream.
In function xfs_test_remount_options(), kfree() is used to free memory
allocated by kmem_zalloc(). But it is better to use kmem_free().
Signed-off-by: Pan Bian <bianpan2016@163.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8353a814f2518dcfa79a5bb77afd0e7dfa391bb1 upstream.
Our loop in xfs_finish_page_writeback, which iterates over all buffer
heads in a page and then calls end_buffer_async_write, which also
iterates over all buffers in the page to check if any I/O is in flight
is not only inefficient, but also potentially dangerous as
end_buffer_async_write can cause the page and all buffers to be freed.
Replace it with a single loop that does the work of end_buffer_async_write
on a per-page basis.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit dd60687ee541ca3f6df8758f38e6f22f57c42a37 upstream.
Reject attempts to set XFLAGS that correspond to di_flags2 inode flags
if the inode isn't a v3 inode, because di_flags2 only exists on v3.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 47c7d0b19502583120c3f396c7559e7a77288a68 upstream.
When calling into _xfs_log_force{,_lsn}() with a pointer
to log_flushed variable, log_flushed will be set to 1 if:
1. xlog_sync() is called to flush the active log buffer
AND/OR
2. xlog_wait() is called to wait on a syncing log buffers
xfs_file_fsync() checks the value of log_flushed after
_xfs_log_force_lsn() call to optimize away an explicit
PREFLUSH request to the data block device after writing
out all the file's pages to disk.
This optimization is incorrect in the following sequence of events:
Task A Task B
-------------------------------------------------------
xfs_file_fsync()
_xfs_log_force_lsn()
xlog_sync()
[submit PREFLUSH]
xfs_file_fsync()
file_write_and_wait_range()
[submit WRITE X]
[endio WRITE X]
_xfs_log_force_lsn()
xlog_wait()
[endio PREFLUSH]
The write X is not guarantied to be on persistent storage
when PREFLUSH request in completed, because write A was submitted
after the PREFLUSH request, but xfs_file_fsync() of task A will
be notified of log_flushed=1 and will skip explicit flush.
If the system crashes after fsync of task A, write X may not be
present on disk after reboot.
This bug was discovered and demonstrated using Josef Bacik's
dm-log-writes target, which can be used to record block io operations
and then replay a subset of these operations onto the target device.
The test goes something like this:
- Use fsx to execute ops of a file and record ops on log device
- Every now and then fsync the file, store md5 of file and mark
the location in the log
- Then replay log onto device for each mark, mount fs and compare
md5 of file to stored value
Cc: Christoph Hellwig <hch@lst.de>
Cc: Josef Bacik <jbacik@fb.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 742d84290739ae908f1b61b7d17ea382c8c0073a upstream.
Currently flag switching can be used to easily crash the kernel. Disable
the per-inode DAX flag until that is sorted out.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2dd3d709fc4338681a3aa61658122fa8faa5a437 upstream.
The owner change bmbt scan that occurs during extent swap operations
does not handle ordered buffer failures. Buffers that cannot be
marked ordered must be physically logged so previously dirty ranges
of the buffer can be relogged in the transaction.
Since the bmbt scan may need to process and potentially log a large
number of blocks, we can't expect to complete this operation in a
single transaction. Update extent swap to use a permanent
transaction with enough log reservation to physically log a buffer.
Update the bmbt scan to physically log any buffers that cannot be
ordered and to terminate the scan with -EAGAIN. On -EAGAIN, the
caller rolls the transaction and restarts the scan. Finally, update
the bmbt scan helper function to skip bmbt blocks that already match
the expected owner so they are not reprocessed after scan restarts.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
[darrick: fix the xfs_trans_roll call]
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a5814bceea48ee1c57c4db2bd54b0c0246daf54a upstream.
Ordered buffers are used in situations where the buffer is not
physically logged but must pass through the transaction/logging
pipeline for a particular transaction. As a result, ordered buffers
are not unpinned and written back until the transaction commits to
the log. Ordered buffers have a strict requirement that the target
buffer must not be currently dirty and resident in the log pipeline
at the time it is marked ordered. If a dirty+ordered buffer is
committed, the buffer is reinserted to the AIL but not physically
relogged at the LSN of the associated checkpoint. The buffer log
item is assigned the LSN of the latest checkpoint and the AIL
effectively releases the previously logged buffer content from the
active log before the buffer has been written back. If the tail
pushes forward and a filesystem crash occurs while in this state, an
inconsistent filesystem could result.
It is currently the caller responsibility to ensure an ordered
buffer is not already dirty from a previous modification. This is
unclear and error prone when not used in situations where it is
guaranteed a buffer has not been previously modified (such as new
metadata allocations).
To facilitate general purpose use of ordered buffers, update
xfs_trans_ordered_buf() to conditionally order the buffer based on
state of the log item and return the status of the result. If the
bli is dirty, do not order the buffer and return false. The caller
must either physically log the buffer (having acquired the
appropriate log reservation) or push it from the AIL to clean it
before it can be marked ordered in the current transaction.
Note that ordered buffers are currently only used in two situations:
1.) inode chunk allocation where previously logged buffers are not
possible and 2.) extent swap which will be updated to handle ordered
buffer failures in a separate patch.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6fb10d6d22094bc4062f92b9ccbcee2f54033d04 upstream.
The extent swap operation currently resets bmbt block owners before
the inode forks are swapped. The bmbt buffers are marked as ordered
so they do not have to be physically logged in the transaction.
This use of ordered buffers is not safe as bmbt buffers may have
been previously physically logged. The bmbt owner change algorithm
needs to be updated to physically log buffers that are already dirty
when/if they are encountered. This means that an extent swap will
eventually require multiple rolling transactions to handle large
btrees. In addition, all inode related changes must be logged before
the bmbt owner change scan begins and can roll the transaction for
the first time to preserve fs consistency via log recovery.
In preparation for such fixes to the bmbt owner change algorithm,
refactor the bmbt scan out of the extent fork swap code to the last
operation before the transaction is committed. Update
xfs_swap_extent_forks() to only set the inode log flags when an
owner change scan is necessary. Update xfs_swap_extents() to trigger
the owner change based on the inode log flags. Note that since the
owner change now occurs after the extent fork swap, the inode btrees
must be fixed up with the inode number of the current inode (similar
to log recovery).
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 99c794c639a65cc7b74f30a674048fd100fe9ac8 upstream.
Extent swap uses xfs_btree_visit_blocks() to fix up bmbt block
owners on v5 (!rmapbt) filesystems. The bmbt scan uses
xfs_btree_lookup_get_block() to read bmbt blocks which verifies the
current owner of the block against the parent inode of the bmbt.
This works during extent swap because the bmbt owners are updated to
the opposite inode number before the inode extent forks are swapped.
The modified bmbt blocks are marked as ordered buffers which allows
everything to commit in a single transaction. If the transaction
commits to the log and the system crashes such that recovery of the
extent swap is required, log recovery restarts the bmbt scan to fix
up any bmbt blocks that may have not been written back before the
crash. The log recovery bmbt scan occurs after the inode forks have
been swapped, however. This causes the bmbt block owner verification
to fail, leads to log recovery failure and requires xfs_repair to
zap the log to recover.
Define a new invalid inode owner flag to inform the btree block
lookup mechanism that the current inode may be invalid with respect
to the current owner of the bmbt block. Set this flag on the cursor
used for change owner scans to allow this operation to work at
runtime and during log recovery.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Fixes: bb3be7e7c ("xfs: check for bogus values in btree block headers")
Cc: stable@vger.kernel.org
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8dc518dfa7dbd079581269e51074b3c55a65a880 upstream.
Ordered buffers are attached to transactions and pushed through the
logging infrastructure just like normal buffers with the exception
that they are not actually written to the log. Therefore, we don't
need to log dirty ranges of ordered buffers. xfs_trans_log_buf() is
called on ordered buffers to set up all of the dirty state on the
transaction, buffer and log item and prepare the buffer for I/O.
Now that xfs_trans_dirty_buf() is available, call it from
xfs_trans_ordered_buf() so the latter is now mutually exclusive with
xfs_trans_log_buf(). This reflects the implementation of ordered
buffers and helps eliminate confusion over the need to log ranges of
ordered buffers just to set up internal log state.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9684010d38eccda733b61106765e9357cf436f65 upstream.
xfs_trans_log_buf() is responsible for logging the dirty segments of
a buffer along with setting all of the necessary state on the
transaction, buffer, bli, etc., to ensure that the associated items
are marked as dirty and prepared for I/O. We have a couple use cases
that need to to dirty a buffer in a transaction without actually
logging dirty ranges of the buffer. One existing use case is
ordered buffers, which are currently logged with arbitrary ranges to
accomplish this even though the content of ordered buffers is never
written to the log. Another pending use case is to relog an already
dirty buffer across rolled transactions within the deferred
operations infrastructure. This is required to prevent a held
(XFS_BLI_HOLD) buffer from pinning the tail of the log.
Refactor xfs_trans_log_buf() into a new function that contains all
of the logic responsible to dirty the transaction, lidp, buffer and
bli. This new function can be used in the future for the use cases
outlined above. This patch does not introduce functional changes.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e9385cc6fb7edf23702de33a2dc82965d92d9392 upstream.
Ordered buffers pass through the logging infrastructure without ever
being written to the log. The way this works is that the ordered
buffer status is transferred to the log vector at commit time via
the ->iop_size() callback. In xlog_cil_insert_format_items(),
ordered log vectors bypass ->iop_format() processing altogether.
Therefore it is unnecessary for xfs_buf_item_format() to handle
ordered buffers. Remove the unnecessary logic and assert that an
ordered buffer never reaches this point.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6453c65d3576bc3e602abb5add15f112755c08ca upstream.
xfs_buf_item_unlock() historically checked the dirty state of the
buffer by manually checking the buffer log formats for dirty
segments. The introduction of ordered buffers invalidated this check
because ordered buffers have dirty bli's but no dirty (logged)
segments. The check was updated to accommodate ordered buffers by
looking at the bli state first and considering the blf only if the
bli is clean.
This logic is safe but unnecessary. There is no valid case where the
bli is clean yet the blf has dirty segments. The bli is set dirty
whenever the blf is logged (via xfs_trans_log_buf()) and the blf is
cleared in the only place BLI_DIRTY is cleared (xfs_trans_binval()).
Remove the conditional blf dirty checks and replace with an assert
that should catch any discrepencies between bli and blf dirty
states. Refactor the old blf dirty check into a helper function to
be used by the assert.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a4f6cf6b2b6b60ec2a05a33a32e65caa4149aa2b upstream.
It checks a single flag and has one caller. It probably isn't worth
its own function.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f2e9ad212def50bcf4c098c6288779dd97fff0f0 upstream.
After xfs_ifree_cluster() finds an inode in the radix tree and verifies
that the inode number is what it expected, xfs_reclaim_inode() can swoop
in and free it. xfs_ifree_cluster() will then happily continue working
on the freed inode. Most importantly, it will mark the inode stale,
which will probably be overwritten when the inode slab object is
reallocated, but if it has already been reallocated then we can end up
with an inode spuriously marked stale.
In 8a17d7ddedb4 ("xfs: mark reclaimed inodes invalid earlier") we added
a second check to xfs_iflush_cluster() to detect this race, but the
similar RCU lookup in xfs_ifree_cluster() needs the same treatment.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 799ea9e9c59949008770aab4e1da87f10e99dbe4 upstream.
When we introduced the bmap redo log items, we set MS_ACTIVE on the
mountpoint and XFS_IRECOVERY on the inode to prevent unlinked inodes
from being truncated prematurely during log recovery. This also had the
effect of putting linked inodes on the lru instead of evicting them.
Unfortunately, we neglected to find all those unreferenced lru inodes
and evict them after finishing log recovery, which means that we leak
them if anything goes wrong in the rest of xfs_mountfs, because the lru
is only cleaned out on unmount.
Therefore, evict unreferenced inodes in the lru list immediately
after clearing MS_ACTIVE.
Fixes: 17c12bcd30 ("xfs: when replaying bmap operations, don't let unlinked inodes get reaped")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Cc: viro@ZenIV.linux.org.uk
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2d32311cf19bfb8c1d2b4601974ddd951f9cfd0b upstream.
In a filesystem without finobt, the Space manager selects an AG to alloc a new
inode, where xfs_dialloc_ag_inobt() will search the AG for the free slot chunk.
When the new inode is in the same AG as its parent, the btree will be searched
starting on the parent's record, and then retried from the top if no slot is
available beyond the parent's record.
To exit this loop though, xfs_dialloc_ag_inobt() relies on the fact that the
btree must have a free slot available, once its callers relied on the
agi->freecount when deciding how/where to allocate this new inode.
In the case when the agi->freecount is corrupted, showing available inodes in an
AG, when in fact there is none, this becomes an infinite loop.
Add a way to stop the loop when a free slot is not found in the btree, making
the function to fall into the whole AG scan which will then, be able to detect
the corruption and shut the filesystem down.
As pointed by Brian, this might impact performance, giving the fact we
don't reset the search distance anymore when we reach the end of the
tree, giving it fewer tries before falling back to the whole AG search, but
it will only affect searches that start within 10 records to the end of the tree.
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e67d3d4246e5fbb0c7c700426d11241ca9c6f473 upstream.
Torn write detection and tail overwrite detection can shift the log
head and tail respectively in the event of CRC mismatch or
corruption errors. Add a high-level log recovery tracepoint to dump
the final log head/tail and make those values easily attainable in
debug/diagnostic situations.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a4c9b34d6a17081005ec459b57b8effc08f4c731 upstream.
Torn write and tail overwrite detection both trigger only on
-EFSBADCRC errors. While this is the most likely failure scenario
for each condition, -EFSCORRUPTED is still possible in certain cases
depending on what ends up on disk when a torn write or partial tail
overwrite occurs. For example, an invalid log record h_len can lead
to an -EFSCORRUPTED error when running the log recovery CRC pass.
Therefore, update log head and tail verification to trigger the
associated head/tail fixups in the event of -EFSCORRUPTED errors
along with -EFSBADCRC. Also, -EFSCORRUPTED can currently be returned
from xlog_do_recovery_pass() before rhead_blk is initialized if the
first record encountered happens to be corrupted. This leads to an
incorrect 'first_bad' return value. Initialize rhead_blk earlier in
the function to address that problem as well.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4a4f66eac4681378996a1837ad1ffec3a2e2981f upstream.
If we consider the case where the tail (T) of the log is pinned long
enough for the head (H) to push and block behind the tail, we can
end up blocked in the following state without enough free space (f)
in the log to satisfy a transaction reservation:
0 phys. log N
[-------HffT---H'--T'---]
The last good record in the log (before H) refers to T. The tail
eventually pushes forward (T') leaving more free space in the log
for writes to H. At this point, suppose space frees up in the log
for the maximum of 8 in-core log buffers to start flushing out to
the log. If this pushes the head from H to H', these next writes
overwrite the previous tail T. This is safe because the items logged
from T to T' have been written back and removed from the AIL.
If the next log writes (H -> H') happen to fail and result in
partial records in the log, the filesystem shuts down having
overwritten T with invalid data. Log recovery correctly locates H on
the subsequent mount, but H still refers to the now corrupted tail
T. This results in log corruption errors and recovery failure.
Since the tail overwrite results from otherwise correct runtime
behavior, it is up to log recovery to try and deal with this
situation. Update log recovery tail verification to run a CRC pass
from the first record past the tail to the head. This facilitates
error detection at T and moves the recovery tail to the first good
record past H' (similar to truncating the head on torn write
detection). If corruption is detected beyond the range possibly
affected by the max number of iclogs, the log is legitimately
corrupted and log recovery failure is expected.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5297ac1f6d7cbf45464a49b9558831f271dfc559 upstream.
Log tail verification currently only occurs when torn writes are
detected at the head of the log. This was introduced because a
change in the head block due to torn writes can lead to a change in
the tail block (each log record header references the current tail)
and the tail block should be verified before log recovery proceeds.
Tail corruption is possible outside of torn write scenarios,
however. For example, partial log writes can be detected and cleared
during the initial head/tail block discovery process. If the partial
write coincides with a tail overwrite, the log tail is corrupted and
recovery fails.
To facilitate correct handling of log tail overwites, update log
recovery to always perform tail verification. This is necessary to
detect potential tail overwrite conditions when torn writes may not
have occurred. This changes normal (i.e., no torn writes) recovery
behavior slightly to detect and return CRC related errors near the
tail before actual recovery starts.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 284f1c2c9bebf871861184b0e2c40fa921dd380b upstream.
The high-level log recovery algorithm consists of two loops that
walk the physical log and process log records from the tail to the
head. The first loop handles the case where the tail is beyond the
head and processes records up to the end of the physical log. The
subsequent loop processes records from the beginning of the physical
log to the head.
Because log records can wrap around the end of the physical log, the
first loop mentioned above must handle this case appropriately.
Records are processed from in-core buffers, which means that this
algorithm must split the reads of such records into two partial
I/Os: 1.) from the beginning of the record to the end of the log and
2.) from the beginning of the log to the end of the record. This is
further complicated by the fact that the log record header and log
record data are read into independent buffers.
The current handling of each buffer correctly splits the reads when
either the header or data starts before the end of the log and wraps
around the end. The data read does not correctly handle the case
where the prior header read wrapped or ends on the physical log end
boundary. blk_no is incremented to or beyond the log end after the
header read to point to the record data, but the split data read
logic triggers, attempts to read from an invalid log block and
ultimately causes log recovery to fail. This can be reproduced
fairly reliably via xfstests tests generic/047 and generic/388 with
large iclog sizes (256k) and small (10M) logs.
If the record header read has pushed beyond the end of the physical
log, the subsequent data read is actually contiguous. Update the
data read logic to detect the case where blk_no has wrapped, mod it
against the log size to read from the correct address and issue one
contiguous read for the log data buffer. The log record is processed
as normal from the buffer(s), the loop exits after the current
iteration and the subsequent loop picks up with the first new record
after the start of the log.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d3a304b6292168b83b45d624784f973fdc1ca674 upstream.
When a buffer has been failed during writeback, the inode items into it
are kept flush locked, and are never resubmitted due the flush lock, so,
if any buffer fails to be written, the items in AIL are never written to
disk and never unlocked.
This causes unmount operation to hang due these items flush locked in AIL,
but this also causes the items in AIL to never be written back, even when
the IO device comes back to normal.
I've been testing this patch with a DM-thin device, creating a
filesystem larger than the real device.
When writing enough data to fill the DM-thin device, XFS receives ENOSPC
errors from the device, and keep spinning on xfsaild (when 'retry
forever' configuration is set).
At this point, the filesystem can not be unmounted because of the flush locked
items in AIL, but worse, the items in AIL are never retried at all
(once xfs_inode_item_push() will skip the items that are flush locked),
even if the underlying DM-thin device is expanded to the proper size.
This patch fixes both cases, retrying any item that has been failed
previously, using the infra-structure provided by the previous patch.
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0b80ae6ed13169bd3a244e71169f2cc020b0c57a upstream.
With the current code, XFS never re-submit a failed buffer for IO,
because the failed item in the buffer is kept in the flush locked state
forever.
To be able to resubmit an log item for IO, we need a way to mark an item
as failed, if, for any reason the buffer which the item belonged to
failed during writeback.
Add a new log item callback to be used after an IO completion failure
and make the needed clean ups.
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 27af1bbf524459962d1477a38ac6e0b7f79aaecc upstream.
xfs_iflush_done uses an on-stack variable length array to pass the log
items to be deleted to xfs_trans_ail_delete_bulk. On-stack VLAs are a
nasty gcc extension that can lead to unbounded stack allocations, but
fortunately we can easily avoid them by simply open coding
xfs_trans_ail_delete_bulk in xfs_iflush_done, which is the only caller
of it except for the single-item xfs_trans_ail_delete.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6f4a1eefdd0ad4561543270a7fceadabcca075dd upstream.
When we do log recovery on a readonly mount, unlinked inode
processing does not happen due to the readonly checks in
xfs_inactive(), which are trying to prevent any I/O on a
readonly mount.
This is misguided - we do I/O on readonly mounts all the time,
for consistency; for example, log recovery. So do the same
RDONLY flag twiddling around xfs_log_mount_finish() as we
do around xfs_log_mount(), for the same reason.
This all cries out for a big rework but for now this is a
simple fix to an obvious problem.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 757a69ef6cf2bf839bd4088e5609ddddd663b0c4 upstream.
There are dueling comments in the xfs code about intent
for log writes when unmounting a readonly filesystem.
In xfs_mountfs, we see the intent:
/*
* Now the log is fully replayed, we can transition to full read-only
* mode for read-only mounts. This will sync all the metadata and clean
* the log so that the recovery we just performed does not have to be
* replayed again on the next mount.
*/
and it calls xfs_quiesce_attr(), but by the time we get to
xfs_log_unmount_write(), it returns early for a RDONLY mount:
* Don't write out unmount record on read-only mounts.
Because of this, sequential ro mounts of a filesystem with
a dirty log will replay the log each time, which seems odd.
Fix this by writing an unmount record even for RO mounts, as long
as norecovery wasn't specified (don't write a clean log record
if a dirty log may still be there!) and the log device is
writable.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e28ae8e428fefe2facd72cea9f29906ecb9c861d upstream.
Fix the min_t calls in the zeroing and dirtying helpers to perform the
comparisms on 64-bit types, which prevents them from incorrectly
being truncated, and larger zeroing operations being stuck in a never
ending loop.
Special thanks to Markus Stockhausen for spotting the bug.
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 77aff8c76425c8f49b50d0b9009915066739e7d2 upstream.
If we fail a mount on account of cow recovery errors, it's possible that
a previous quotacheck left some dquots in memory. The bailout clause of
xfs_mountfs forgets to purge these, and so we leak them. Fix that.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8204f8ddaafafcae074746fcf2a05a45e6827603 upstream.
Way back when we established inode block-map redo log items, it was
discovered that we needed to prevent the VFS from evicting inodes during
log recovery because any given inode might be have bmap redo items to
replay even if the inode has no link count and is ultimately deleted,
and any eviction of an unlinked inode causes the inode to be truncated
and freed too early.
To make this possible, we set MS_ACTIVE so that inodes would not be torn
down immediately upon release. Unfortunately, this also results in the
quota inodes not being released at all if a later part of the mount
process should fail, because we never reclaim the inodes. So, set
MS_ACTIVE right before we do the last part of log recovery and clear it
immediately after we finish the log recovery so that everything
will be torn down properly if we abort the mount.
Fixes: 17c12bcd30 ("xfs: when replaying bmap operations, don't let unlinked inodes get reaped")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c44245b3d5435f533ca8346ece65918f84c057f9 upstream.
When we try to allocate a free inode by searching the inobt, we try to
find the inode nearest the parent inode by searching chunks both left
and right of the chunk containing the parent. As an optimization, we
cache the leftmost and rightmost records that we previously searched; if
we do another allocation with the same parent inode, we'll pick up the
search where it last left off.
There's a bug in the case where we found a free inode to the left of the
parent's chunk: we need to update the cached left and right records, but
because we already reassigned the right record to point to the left, we
end up assigning the left record to both the cached left and right
records.
This isn't a correctness problem strictly, but it can result in the next
allocation rechecking chunks unnecessarily or allocating inodes further
away from the parent than it needs to. Fix it by swapping the record
pointer after we update the cached left and right records.
Fixes: bd169565993b ("xfs: speed up free inode search")
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 56bdf855e676f1f2ed7033f288f57dfd315725ba upstream.
According to the commit that implemented per-inode DAX flag:
commit 58f88ca2df72 ("xfs: introduce per-inode DAX enablement")
the flag is supposed to act as "inherit flag".
Currently this only works in the situations where parent directory
already has a flag in di_flags set, otherwise inheritance does not
work. This is because setting the XFS_DIFLAG2_DAX flag is done in a
wrong branch designated for di_flags, not di_flags2.
Fix this by moving the code to branch designated for setting di_flags2,
which does test for flags in di_flags2.
Fixes: 58f88ca2df72 ("xfs: introduce per-inode DAX enablement")
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5b094d6dac0451ad89b1dc088395c7b399b7e9e8 upstream.
Just like in the allocator we must avoid touching multiple AGs out of
order when freeing blocks, as freeing still locks the AGF and can cause
the same AB-BA deadlocks as in the allocation path.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Nikolay Borisov <n.borisov.lkml@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit cfaf2d034360166e569a4929dd83ae9698bed856 upstream.
If a dquot has an id of U32_MAX, the next lookup index increment
overflows the uint32_t back to 0. This starts the lookup sequence
over from the beginning, repeats indefinitely and results in a
livelock.
Update xfs_qm_dquot_walk() to explicitly check for the lookup
overflow and exit the loop.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 10479e2dea83d4c421ad05dfc55d918aa8dfc0cd upstream.
In some circumstances, _alloc_read_agf can return an error code of zero
but also a null AGF buffer pointer. Check for this and jump out.
Fixes-coverity-id: 1415250
Fixes-coverity-id: 1415320
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4c1a67bd3606540b9b42caff34a1d5cd94b1cf65 upstream.
We must initialize the firstfsb parameter to _bmapi_write so that it
doesn't incorrectly treat stack garbage as a restriction on which AGs
it can search for free space.
Fixes-coverity-id: 1402025
Fixes-coverity-id: 1415167
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1e86eabe73b73c82e1110c746ed3ec6d5e1c0a0d upstream.
Check the _btree_check_block return value for the firstrec and lastrec
functions, since we have the ability to signal that the repositioning
did not succeed.
Fixes-coverity-id: 114067
Fixes-coverity-id: 114068
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit cd87d867920155911d0d2e6485b769d853547750 upstream.
In quite a few places we call xfs_da_read_buf with a mappedbno that we
don't control, then assume that the function passes back either an error
code or a buffer pointer. Unfortunately, if mappedbno == -2 and bno
maps to a hole, we get a return code of zero and a NULL buffer, which
means that we crash if we actually try to use that buffer pointer. This
happens immediately when we set the buffer type for transaction context.
Therefore, check that we have no error code and a non-NULL bp before
trying to use bp. This patch is a follow-up to an incomplete fix in
96a3aefb8ffde231 ("xfs: don't crash if reading a directory results in an
unexpected hole").
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit cf2cb7845d6e101cb17bd62f8aa08cd514fc8988 upstream.
XFS runs an eofblocks reclaim scan before returning an ENOSPC error to
userspace for buffered writes. This facilitates aggressive speculative
preallocation without causing user visible side effects such as
premature ENOSPC.
Run a cowblocks scan in the same situation to reclaim lingering COW fork
preallocation throughout the filesystem.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 39775431f82f890f4aaa08860a30883d081bffc7 upstream.
Log recovery allocates in-core transaction and member item data
structures on-demand as it processes the on-disk log. Transactions
are allocated on first encounter on-disk and stored in a hash table
structure where they are easily accessible for subsequent lookups.
Transaction items are also allocated on demand and are attached to
the associated transactions.
When a commit record is encountered in the log, the transaction is
committed to the fs and the in-core structures are freed. If a
filesystem crashes or shuts down before all in-core log buffers are
flushed to the log, however, not all transactions may have commit
records in the log. As expected, the modifications in such an
incomplete transaction are not replayed to the fs. The in-core data
structures for the partial transaction are never freed, however,
resulting in a memory leak.
Update xlog_do_recovery_pass() to first correctly initialize the
hash table array so empty lists can be distinguished from populated
lists on function exit. Update xlog_recover_free_trans() to always
remove the transaction from the list prior to freeing the associated
memory. Finally, walk the hash table of transaction lists as the
last step before it goes out of scope and free any transactions that
may remain on the lists. This prevents a memory leak of partial
transactions in the log.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 61d819e7bcb7f33da710bf3f5dcb2bcf1e48203c upstream.
bmap returns a dumb LBA address but not the block device that goes with
that LBA. Swapfiles don't care about this and will blindly assume that
the data volume is the correct blockdev, which is totally bogus for
files on the rt subvolume. This results in the swap code doing IOs to
arbitrary locations on the data device(!) if the passed in mapping is a
realtime file, so just turn off bmap for rt files.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3d4b4a3e30ae7a949c31e1e10268a3da4723d290 upstream.
When a buffer is modified, logged and committed, it ultimately ends
up sitting on the AIL with a dirty bli waiting for metadata
writeback. If another transaction locks and invalidates the buffer
(freeing an inode chunk, for example) in the meantime, the bli is
flagged as stale, the dirty state is cleared and the bli remains in
the AIL.
If a shutdown occurs before the transaction that has invalidated the
buffer is committed, the transaction is ultimately aborted. The log
items are flagged as such and ->iop_unlock() handles the aborted
items. Because the bli is clean (due to the invalidation),
->iop_unlock() unconditionally releases it. The log item may still
reside in the AIL, however, which means the I/O completion handler
may still run and attempt to access it. This results in assert
failure due to the release of the bli while still present in the AIL
and a subsequent NULL dereference and panic in the buffer I/O
completion handling. This can be reproduced by running generic/388
in repetition.
To avoid this problem, update xfs_buf_item_unlock() to first check
whether the bli is aborted and if so, remove it from the AIL before
it is released. This ensures that the bli is no longer accessed
during the shutdown sequence after it has been freed.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 79e641ce29cfae5b8fc55fb77ac62d11d2d849c0 upstream.
If a filesystem shutdown occurs with a buffer log item in the CIL
and a log force occurs, the ->iop_unpin() handler is generally
expected to tear down the bli properly. This entails freeing the bli
memory and releasing the associated hold on the buffer so it can be
released and the filesystem unmounted.
If this sequence occurs while ->bli_refcount is elevated (i.e.,
another transaction is open and attempting to modify the buffer),
however, ->iop_unpin() may not be responsible for releasing the bli.
Instead, the transaction may release the final ->bli_refcount
reference and thus xfs_trans_brelse() is responsible for tearing
down the bli.
While xfs_trans_brelse() does drop the reference count, it only
attempts to release the bli if it is clean (i.e., not in the
CIL/AIL). If the filesystem is shutdown and the bli is sitting dirty
in the CIL as noted above, this ends up skipping the last
opportunity to release the bli. In turn, this leaves the hold on the
buffer and causes an unmount hang. This can be reproduced by running
generic/388 in repetition.
Update xfs_trans_brelse() to handle this shutdown corner case
correctly. If the final bli reference is dropped and the filesystem
is shutdown, remove the bli from the AIL (if necessary) and release
the bli to drop the buffer hold and ensure an unmount does not hang.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
shared extent
commit e1a4e37cc7b665b6804fba812aca2f4d7402c249 upstream.
In a pathological scenario where we are trying to bunmapi a single
extent in which every other block is shared, it's possible that trying
to unmap the entire large extent in a single transaction can generate so
many EFIs that we overflow the transaction reservation.
Therefore, use a heuristic to guess at the number of blocks we can
safely unmap from a reflink file's data fork in an single transaction.
This should prevent problems such as the log head slamming into the tail
and ASSERTs that trigger because we've exceeded the transaction
reservation.
Note that since bunmapi can fail to unmap the entire range, we must also
teach the deferred unmap code to roll into a new transaction whenever we
get low on reservation.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
[hch: random edits, all bugs are my fault]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7912e7fef2aebe577f0b46d3cba261f2783c5695 upstream.
Reclaim during quotacheck can lead to deadlocks on the dquot flush
lock:
- Quotacheck populates a local delwri queue with the physical dquot
buffers.
- Quotacheck performs the xfs_qm_dqusage_adjust() bulkstat and
dirties all of the dquots.
- Reclaim kicks in and attempts to flush a dquot whose buffer is
already queud on the quotacheck queue. The flush succeeds but
queueing to the reclaim delwri queue fails as the backing buffer is
already queued. The flush unlock is now deferred to I/O completion
of the buffer from the quotacheck queue.
- The dqadjust bulkstat continues and dirties the recently flushed
dquot once again.
- Quotacheck proceeds to the xfs_qm_flush_one() walk which requires
the flush lock to update the backing buffers with the in-core
recalculated values. It deadlocks on the redirtied dquot as the
flush lock was already acquired by reclaim, but the buffer resides
on the local delwri queue which isn't submitted until the end of
quotacheck.
This is reproduced by running quotacheck on a filesystem with a
couple million inodes in low memory (512MB-1GB) situations. This is
a regression as of commit 43ff2122e6 ("xfs: on-stack delayed write
buffer lists"), which removed a trylock and buffer I/O submission
from the quotacheck dquot flush sequence.
Quotacheck first resets and collects the physical dquot buffers in a
delwri queue. Then, it traverses the filesystem inodes via bulkstat,
updates the in-core dquots, flushes the corrected dquots to the
backing buffers and finally submits the delwri queue for I/O. Since
the backing buffers are queued across the entire quotacheck
operation, dquot reclaim cannot possibly complete a dquot flush
before quotacheck completes.
Therefore, quotacheck must submit the buffer for I/O in order to
cycle the flush lock and flush the dirty in-core dquot to the
buffer. Add a delwri queue buffer push mechanism to submit an
individual buffer for I/O without losing the delwri queue status and
use it from quotacheck to avoid the deadlock. This restores
quotacheck behavior to as before the regression was introduced.
Reported-by: Martin Svec <martin.svec@zoner.cz>
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
