summaryrefslogtreecommitdiff
path: root/include/net/xfrm.h
AgeCommit message (Collapse)Author
2012-10-02Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull user namespace changes from Eric Biederman: "This is a mostly modest set of changes to enable basic user namespace support. This allows the code to code to compile with user namespaces enabled and removes the assumption there is only the initial user namespace. Everything is converted except for the most complex of the filesystems: autofs4, 9p, afs, ceph, cifs, coda, fuse, gfs2, ncpfs, nfs, ocfs2 and xfs as those patches need a bit more review. The strategy is to push kuid_t and kgid_t values are far down into subsystems and filesystems as reasonable. Leaving the make_kuid and from_kuid operations to happen at the edge of userspace, as the values come off the disk, and as the values come in from the network. Letting compile type incompatible compile errors (present when user namespaces are enabled) guide me to find the issues. The most tricky areas have been the places where we had an implicit union of uid and gid values and were storing them in an unsigned int. Those places were converted into explicit unions. I made certain to handle those places with simple trivial patches. Out of that work I discovered we have generic interfaces for storing quota by projid. I had never heard of the project identifiers before. Adding full user namespace support for project identifiers accounts for most of the code size growth in my git tree. Ultimately there will be work to relax privlige checks from "capable(FOO)" to "ns_capable(user_ns, FOO)" where it is safe allowing root in a user names to do those things that today we only forbid to non-root users because it will confuse suid root applications. While I was pushing kuid_t and kgid_t changes deep into the audit code I made a few other cleanups. I capitalized on the fact we process netlink messages in the context of the message sender. I removed usage of NETLINK_CRED, and started directly using current->tty. Some of these patches have also made it into maintainer trees, with no problems from identical code from different trees showing up in linux-next. After reading through all of this code I feel like I might be able to win a game of kernel trivial pursuit." Fix up some fairly trivial conflicts in netfilter uid/git logging code. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (107 commits) userns: Convert the ufs filesystem to use kuid/kgid where appropriate userns: Convert the udf filesystem to use kuid/kgid where appropriate userns: Convert ubifs to use kuid/kgid userns: Convert squashfs to use kuid/kgid where appropriate userns: Convert reiserfs to use kuid and kgid where appropriate userns: Convert jfs to use kuid/kgid where appropriate userns: Convert jffs2 to use kuid and kgid where appropriate userns: Convert hpfs to use kuid and kgid where appropriate userns: Convert btrfs to use kuid/kgid where appropriate userns: Convert bfs to use kuid/kgid where appropriate userns: Convert affs to use kuid/kgid wherwe appropriate userns: On alpha modify linux_to_osf_stat to use convert from kuids and kgids userns: On ia64 deal with current_uid and current_gid being kuid and kgid userns: On ppc convert current_uid from a kuid before printing. userns: Convert s390 getting uid and gid system calls to use kuid and kgid userns: Convert s390 hypfs to use kuid and kgid where appropriate userns: Convert binder ipc to use kuids userns: Teach security_path_chown to take kuids and kgids userns: Add user namespace support to IMA userns: Convert EVM to deal with kuids and kgids in it's hmac computation ...
2012-09-18userns: Convert the audit loginuid to be a kuidEric W. Biederman
Always store audit loginuids in type kuid_t. Print loginuids by converting them into uids in the appropriate user namespace, and then printing the resulting uid. Modify audit_get_loginuid to return a kuid_t. Modify audit_set_loginuid to take a kuid_t. Modify /proc/<pid>/loginuid on read to convert the loginuid into the user namespace of the opener of the file. Modify /proc/<pid>/loginud on write to convert the loginuid rom the user namespace of the opener of the file. Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Eric Paris <eparis@redhat.com> Cc: Paul Moore <paul@paul-moore.com> ? Cc: David Miller <davem@davemloft.net> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-09-04xfrm: Workaround incompatibility of ESN and async cryptoSteffen Klassert
ESN for esp is defined in RFC 4303. This RFC assumes that the sequence number counters are always up to date. However, this is not true if an async crypto algorithm is employed. If the sequence number counters are not up to date on sequence number check, we may incorrectly update the upper 32 bit of the sequence number. This leads to a DOS. We workaround this by comparing the upper sequence number, (used for authentication) with the upper sequence number computed after the async processing. We drop the packet if these numbers are different. To do this, we introduce a recheck function that does this check in the ESN case. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-20net: ipv6: fix oops in inet_putpeer()Patrick McHardy
Commit 97bab73f (inet: Hide route peer accesses behind helpers.) introduced a bug in xfrm6_policy_destroy(). The xfrm_dst's _rt6i_peer member is not initialized, causing a false positive result from inetpeer_ptr_is_peer(), which in turn causes a NULL pointer dereference in inet_putpeer(). Pid: 314, comm: kworker/0:1 Not tainted 3.6.0-rc1+ #17 To Be Filled By O.E.M. To Be Filled By O.E.M./P4S800D-X EIP: 0060:[<c03abf93>] EFLAGS: 00010246 CPU: 0 EIP is at inet_putpeer+0xe/0x16 EAX: 00000000 EBX: f3481700 ECX: 00000000 EDX: 000dd641 ESI: f3481700 EDI: c05e949c EBP: f551def4 ESP: f551def4 DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068 CR0: 8005003b CR2: 00000070 CR3: 3243d000 CR4: 00000750 DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 DR6: ffff0ff0 DR7: 00000400 f551df04 c0423de1 00000000 f3481700 f551df18 c038d5f7 f254b9f8 f551df28 f34f85d8 f551df20 c03ef48d f551df3c c0396870 f30697e8 f24e1738 c05e98f4 f5509540 c05cd2b4 f551df7c c0142d2b c043feb5 f5509540 00000000 c05cd2e8 [<c0423de1>] xfrm6_dst_destroy+0x42/0xdb [<c038d5f7>] dst_destroy+0x1d/0xa4 [<c03ef48d>] xfrm_bundle_flo_delete+0x2b/0x36 [<c0396870>] flow_cache_gc_task+0x85/0x9f [<c0142d2b>] process_one_work+0x122/0x441 [<c043feb5>] ? apic_timer_interrupt+0x31/0x38 [<c03967eb>] ? flow_cache_new_hashrnd+0x2b/0x2b [<c0143e2d>] worker_thread+0x113/0x3cc Fix by adding a init_dst() callback to struct xfrm_policy_afinfo to properly initialize the dst's peer pointer. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-02Fix unexpected SA hard expiration after changing dateFan Du
After SA is setup, one timer is armed to detect soft/hard expiration, however the timer handler uses xtime to do the math. This makes hard expiration occurs first before soft expiration after setting new date with big interval. As a result new child SA is deleted before rekeying the new one. Signed-off-by: Fan Du <fdu@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-18net/ipv4: VTI support rx-path hook in xfrm4_mode_tunnel.Saurabh
Incorporated David and Steffen's comments. Add hook for rx-path xfmr4_mode_tunnel for VTI tunnel module. Signed-off-by: Saurabh Mohan <saurabh.mohan@vyatta.com> Reviewed-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-28xfrm_user: Propagate netlink error codes properly.David S. Miller
Instead of using a fixed value of "-1" or "-EMSGSIZE", propagate what the nla_*() interfaces actually return. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-15xfrm: Convert several xfrm policy match functions to bool.David S. Miller
xfrm_selector_match xfrm_sec_ctx_match __xfrm4_selector_match __xfrm6_selector_match Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-02xfrm: Stop using NLA_PUT*().David S. Miller
These macros contain a hidden goto, and are thus extremely error prone and make code hard to audit. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-26xfrm: remove unneeded method typedef declaration in net/xfrm.h.Rami Rosen
The patch removes unneeded method typedef declaration (icv_update_fn_t ) and the two struct declarations which appear in its prototype (struct hash_desc and struct scatterlist) in net/xfrm.h. Signed-off-by: Rami Rosen <ramirose@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-22net: remove ipv6_addr_copy()Alexey Dobriyan
C assignment can handle struct in6_addr copying. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-22xfrm: optimize ipv4 selector matchingAlexey Dobriyan
Current addr_match() is errh, under-optimized. Compiler doesn't know that memcmp() branch doesn't trigger for IPv4. Also, pass addresses by value -- they fit into register. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-11Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-3.6 Conflicts: drivers/net/benet/be_main.c
2011-05-10xfrm: Assign the inner mode output function to the dst entrySteffen Klassert
As it is, we assign the outer modes output function to the dst entry when we create the xfrm bundle. This leads to two problems on interfamily scenarios. We might insert ipv4 packets into ip6_fragment when called from xfrm6_output. The system crashes if we try to fragment an ipv4 packet with ip6_fragment. This issue was introduced with git commit ad0081e4 (ipv6: Fragment locally generated tunnel-mode IPSec6 packets as needed). The second issue is, that we might insert ipv4 packets in netfilter6 and vice versa on interfamily scenarios. With this patch we assign the inner mode output function to the dst entry when we create the xfrm bundle. So xfrm4_output/xfrm6_output from the inner mode is used and the right fragmentation and netfilter functions are called. We switch then to outer mode with the output_finish functions. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-22inet: constify ip headers and in6_addrEric Dumazet
Add const qualifiers to structs iphdr, ipv6hdr and in6_addr pointers where possible, to make code intention more obvious. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-11Disable rp_filter for IPsec packetsMichael Smith
The reverse path filter interferes with IPsec subnet-to-subnet tunnels, especially when the link to the IPsec peer is on an interface other than the one hosting the default route. With dynamic routing, where the peer might be reachable through eth0 today and eth1 tomorrow, it's difficult to keep rp_filter enabled unless fake routes to the remote subnets are configured on the interface currently used to reach the peer. IPsec provides a much stronger anti-spoofing policy than rp_filter, so this patch disables the rp_filter for packets with a security path. Signed-off-by: Michael Smith <msmith@cbnco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-29xfrm: Assign esn pointers when cloning a stateSteffen Klassert
When we clone a xfrm state we have to assign the replay_esn and the preplay_esn pointers to the state if we use the new replay detection method. To this end, we add a xfrm_replay_clone() function that allocates memory for the replay detection and takes over the necessary values from the original state. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-22xfrm: Fix initialize repl field of struct xfrm_stateWei Yongjun
Commit 'xfrm: Move IPsec replay detection functions to a separate file' (9fdc4883d92d20842c5acea77a4a21bb1574b495) introduce repl field to struct xfrm_state, and only initialize it under SA's netlink create path, the other path, such as pf_key, ipcomp/ipcomp6 etc, the repl field remaining uninitialize. So if the SA is created by pf_key, any input packet with SA's encryption algorithm will cause panic. int xfrm_input() { ... x->repl->advance(x, seq); ... } This patch fixed it by introduce new function __xfrm_init_state(). Pid: 0, comm: swapper Not tainted 2.6.38-next+ #14 Bochs Bochs EIP: 0060:[<c078e5d5>] EFLAGS: 00010206 CPU: 0 EIP is at xfrm_input+0x31c/0x4cc EAX: dd839c00 EBX: 00000084 ECX: 00000000 EDX: 01000000 ESI: dd839c00 EDI: de3a0780 EBP: dec1de88 ESP: dec1de64 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 Process swapper (pid: 0, ti=dec1c000 task=c09c0f20 task.ti=c0992000) Stack: 00000000 00000000 00000002 c0ba27c0 00100000 01000000 de3a0798 c0ba27c0 00000033 dec1de98 c0786848 00000000 de3a0780 dec1dea4 c0786868 00000000 dec1debc c074ee56 e1da6b8c de3a0780 c074ed44 de3a07a8 dec1decc c074ef32 Call Trace: [<c0786848>] xfrm4_rcv_encap+0x22/0x27 [<c0786868>] xfrm4_rcv+0x1b/0x1d [<c074ee56>] ip_local_deliver_finish+0x112/0x1b1 [<c074ed44>] ? ip_local_deliver_finish+0x0/0x1b1 [<c074ef32>] NF_HOOK.clone.1+0x3d/0x44 [<c074ef77>] ip_local_deliver+0x3e/0x44 [<c074ed44>] ? ip_local_deliver_finish+0x0/0x1b1 [<c074ec03>] ip_rcv_finish+0x30a/0x332 [<c074e8f9>] ? ip_rcv_finish+0x0/0x332 [<c074ef32>] NF_HOOK.clone.1+0x3d/0x44 [<c074f188>] ip_rcv+0x20b/0x247 [<c074e8f9>] ? ip_rcv_finish+0x0/0x332 [<c072797d>] __netif_receive_skb+0x373/0x399 [<c0727bc1>] netif_receive_skb+0x4b/0x51 [<e0817e2a>] cp_rx_poll+0x210/0x2c4 [8139cp] [<c072818f>] net_rx_action+0x9a/0x17d [<c0445b5c>] __do_softirq+0xa1/0x149 [<c0445abb>] ? __do_softirq+0x0/0x149 Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-14xfrm: Add support for IPsec extended sequence numbersSteffen Klassert
This patch adds support for IPsec extended sequence numbers (esn) as defined in RFC 4303. The bits to manage the anti-replay window are based on a patch from Alex Badea. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-14xfrm: Move IPsec replay detection functions to a separate fileSteffen Klassert
To support multiple versions of replay detection, we move the replay detection functions to a separate file and make them accessible via function pointers contained in the struct xfrm_replay. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-14xfrm: Use separate low and high order bits of the sequence numbers in ↵Steffen Klassert
xfrm_skb_cb To support IPsec extended sequence numbers, we split the output sequence numbers of xfrm_skb_cb in low and high order 32 bits and we add the high order 32 bits to the input sequence numbers. All users are updated accordingly. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-14xfrm: Add basic infrastructure to support IPsec extended sequence numbersSteffen Klassert
This patch adds the struct xfrm_replay_state_esn which will be used to support IPsec extended sequence numbers and anti replay windows bigger than 32 packets. Also we add a function that returns the actual size of the xfrm_replay_state_esn, a xfrm netlink atribute and a xfrm state flag for the use of extended sequence numbers. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-12net: Use flowi4 and flowi6 in xfrm layer.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-12net: Make flowi ports AF dependent.David S. Miller
Create two sets of port member accessors, one set prefixed by fl4_* and the other prefixed by fl6_* This will let us to create AF optimal flow instances. It will work because every context in which we access the ports, we have to be fully aware of which AF the flowi is anyways. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-12net: Put flowi_* prefix on AF independent members of struct flowiDavid S. Miller
I intend to turn struct flowi into a union of AF specific flowi structs. There will be a common structure that each variant includes first, much like struct sock_common. This is the first step to move in that direction. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-01xfrm: Handle blackhole route creation via afinfo.David S. Miller
That way we don't have to potentially do this in every xfrm_lookup() caller. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-28xfrm: Pass const xfrm_mark to xfrm_mark_put().David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-28xfrm: Pass const xfrm_address_t objects to xfrm_state_lookup* and xfrm_find_acq.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-28xfrm: Pass const arg to xfrm_alg_len and xfrm_alg_auth_len.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-28xfrm: Pass name as const to xfrm_*_get_byname().David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-24xfrm: Const'ify xfrm_address_t args to xfrm_state_find.David S. Miller
This required a const'ification in xfrm_init_tempstate() too. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-24xfrm: Const'ify ptr args to xfrm_state_*_check and xfrm_state_kern.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-24xfrm: Const'ify xfrm_tmpl and xfrm_state args to xfrm_state_addr_cmp.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-24xfrm: Const'ify policy arg to xp_net.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-24xfrm: Const'ify selector args in xfrm_migrate paths.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-24xfrm: Const'ify pointer args to km_migrate() and implementations.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-24xfrm: Const'ify address argument to xfrm_addr_any()David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-24xfrm: Const'ify address arguments to xfrm_addr_cmp()David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-24xfrm: Const'ify address arguments to ->dst_lookup()David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-24xfrm: Const'ify selector argument to xfrm_selector_match()David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-24xfrm: Const'ify tmpl and address arguments to ->init_temprop()David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-24xfrm: Pass km_event pointers around as const when possible.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-23xfrm: Mark flowi arg to xfrm_state_find() const.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-23xfrm: Mark flowi arg to xfrm_selector_match() const.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-23xfrm: Mark token args to addr_match() const.David S. Miller
Also, make it return a real bool. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-23xfrm: Mark flowi arg to xfrm_type->reject() const.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-23xfrm: Mark flowi arg to ->init_tempsel() const.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-23xfrm: Mark flowi arg to ->fill_dst() const.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-23xfrm: Mark flowi arg to ->get_tos() const.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-23xfrm: Mark flowi arg const in key extraction helpers.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>