summaryrefslogtreecommitdiff
path: root/include/soc
AgeCommit message (Collapse)Author
2016-05-19Merge tag 'arc-4.7-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull ARC updates from Vineet Gupta: "We have a relatively big changeset for ARC for 4.7. The highlight is support for EZChip (now Mellanox) NPS-400 network processor, a 400-Gb throughput C-programmable packet processor based on ARC700 cores from Synopsys. See http://www.mellanox.com/related-docs/prod_npu/PB_NPS-400.pdf Also present are irqchip and clocksource drivers for NPS as agreed with respective maintainers to go via ARC tree due to an soc header dependency. I have the needed ACKs from Jason, Marc, Daniel. You might run into a trivial merge conflict in drivers/irqchip/* This EZChip platform support required some deep changes in ARC architecture code and also opportunity to cleanup past sins (legacy irq domains, missing irq domain lookup, hard coded timer irqs...) Summary: - Support for EZChip (now Mellanox) NPS-400 Network processor based on ARC700 - NPS interrupt controller and clocksource drivers - ARC timers probed off DT - ARC iqrchips switching to linear domain (upgrade from legacy domains)" * tag 'arc-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: (37 commits) arc: axs103_smp: Fix CPU frequency to 100MHz for dual-core arc: axs10x: Add DT bindings for I2S PLL Clock ARC: pae: STRICT_MM_TYPECHECKS was broken ARC: Add eznps platform to Kconfig and Makefile ARC: [plat-eznps] Use dedicated COMMAND_LINE_SIZE ARC: [plat-eznps] Use dedicated cpu_relax() ARC: [plat-eznps] Use dedicated identity auxiliary register. ARC: [plat-eznps] Use dedicated SMP barriers ARC: [plat-eznps] Use dedicated atomic/bitops/cmpxchg ARC: [plat-eznps] Use dedicated user stack top ARC: [plat-eznps] Add eznps platform ARC: [plat-eznps] Add eznps board defconfig and dts ARC: Mark secondary cpu online only after all HW setup is done ARC: rwlock: disable interrupts in !LLSC variant ARC: Make vmalloc size configurable ARC: clean out UAPI byteorder.h clean off Kconfig symbol irqchip: add nps Internal and external irqchips clocksource: Add NPS400 timers driver soc: Support for EZchip SoC Documentation: Add EZchip vendor to binding list ...
2016-05-18Merge tag 'armsoc-drivers' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Arnd Bergmann: "Driver updates for ARM SoCs, these contain various things that touch the drivers/ directory but got merged through arm-soc for practical reasons. For the most part, this is now related to power management controllers, which have not yet been abstracted into a separate subsystem, and typically require some code in drivers/soc or arch/arm to control the power domains. Another large chunk here is a rework of the NVIDIA Tegra USB3.0 support, which was surprisingly tricky and took a long time to get done. Finally, reset controller handling as always gets merged through here as well" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (97 commits) arm-ccn: Enable building as module soc/tegra: pmc: Add generic PM domain support usb: xhci: tegra: Add Tegra210 support usb: xhci: Add NVIDIA Tegra XUSB controller driver dt-bindings: usb: xhci-tegra: Add Tegra210 XUSB controller support dt-bindings: usb: Add NVIDIA Tegra XUSB controller binding PCI: tegra: Support per-lane PHYs dt-bindings: pci: tegra: Update for per-lane PHYs phy: tegra: Add Tegra210 support phy: Add Tegra XUSB pad controller support dt-bindings: phy: tegra-xusb-padctl: Add Tegra210 support dt-bindings: phy: Add NVIDIA Tegra XUSB pad controller binding phy: core: Allow children node to be overridden clk: tegra: Add interface to enable hardware control of SATA/XUSB PLLs drivers: firmware: psci: make two helper functions inline soc: renesas: rcar-sysc: Add support for R-Car H3 power areas soc: renesas: rcar-sysc: Add support for R-Car E2 power areas soc: renesas: rcar-sysc: Add support for R-Car M2-N power areas soc: renesas: rcar-sysc: Add support for R-Car M2-W power areas soc: renesas: rcar-sysc: Add support for R-Car H2 power areas ...
2016-05-09Merge tag 'tegra-for-4.7-genpd' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/drivers Merge "soc/tegra: Add generic PM domain support" from Thierry Reding: Implements generic PM domain support on top of the existing Tegra power- gate API. Drivers are thus allowed to move away from the Tegra-specific API and towards using generic power domains directly. * tag 'tegra-for-4.7-genpd' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: soc/tegra: pmc: Add generic PM domain support dt-bindings: Add power domain info for NVIDIA PMC
2016-05-09Merge tag 'tegra-for-4.7-phy' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/drivers Merge "phy: tegra: Changes for v4.7-rc1" from Thierry Reding: This set of patches adds support for the Tegra XUSB pad controller. The controller provides a set of pads (lanes) that are used for I/O by other IP blocks within Tegra SoCs (PCIe, SATA and XUSB). * tag 'tegra-for-4.7-phy' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: phy: tegra: Add Tegra210 support phy: Add Tegra XUSB pad controller support dt-bindings: phy: tegra-xusb-padctl: Add Tegra210 support dt-bindings: phy: Add NVIDIA Tegra XUSB pad controller binding phy: core: Allow children node to be overridden clk: tegra: Add interface to enable hardware control of SATA/XUSB PLLs
2016-05-09soc: Support for EZchip SoCNoam Camus
This header file is for NPS400 SoC. It includes macros for accessing memory mapped registers. These are functional registers that core can use to configure SoC. Signed-off-by: Noam Camus <noamc@ezchip.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Vineet Gupta <vgupta@synopsys.com>
2016-04-29soc/tegra: pmc: Add generic PM domain supportJon Hunter
Adds generic PM domain support to the PMC driver where the PM domains are populated from device-tree and the PM domain consumer devices are bound to their relevant PM domains via device-tree as well. Update the tegra_powergate_sequence_power_up() API so that internally it calls the same tegra_powergate_xxx functions that are used by the Tegra generic PM domain code for consistency. To ensure that the Tegra power domains (a.k.a. powergates) cannot be controlled via both the legacy tegra_powergate_xxx functions as well as the generic PM domain framework, add a bit map for available powergates that can be controlled via the legacy powergate functions. Move the majority of the tegra_powergate_remove_clamping() function to a sub-function, so that this can be used by both the legacy and generic power domain code. This is based upon work by Thierry Reding <treding@nvidia.com> and Vince Hsu <vinceh@nvidia.com>. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-04-29phy: tegra: Add Tegra210 supportThierry Reding
Add support for the XUSB pad controller found on Tegra210 SoCs. The hardware is roughly the same, but some of the registers have been moved around and the number and type of supported pads has changed. Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-04-05soc/tegra: pmc: Change powergate and rail IDs to be an unsigned typeJon Hunter
The Tegra powergate and rail IDs are always positive values and so change the type to be unsigned and remove the tests to see if the ID is less than zero. Update the Tegra DC powergate type to be an unsigned as well. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-03-29ARM: dts: at91: sama5d2: add SFR nodeCyrille Pitchen
This SFR node is looked up by the I2S controller driver to tune the SFR_I2SCLKSEL register. Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2016-03-22Merge tag 'iommu-updates-v4.6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU updates from Joerg Roedel: - updates for the Exynos IOMMU driver to make use of default domains and to add support for the SYSMMU v5 - new Mediatek IOMMU driver - support for the ARMv7 short descriptor format in the io-pgtable code - default domain support for the ARM SMMU - couple of other small fixes all over the place * tag 'iommu-updates-v4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (41 commits) iommu/ipmmu-vmsa: Add r8a7795 DT binding iommu/mediatek: Check for NULL instead of IS_ERR() iommu/io-pgtable-armv7s: Fix kmem_cache_alloc() flags iommu/mediatek: Fix handling of of_count_phandle_with_args result iommu/dma: Fix NEED_SG_DMA_LENGTH dependency iommu/mediatek: Mark PM functions as __maybe_unused iommu/mediatek: Select ARM_DMA_USE_IOMMU iommu/exynos: Use proper readl/writel register interface iommu/exynos: Pointers are nto physical addresses dts: mt8173: Add iommu/smi nodes for mt8173 iommu/mediatek: Add mt8173 IOMMU driver memory: mediatek: Add SMI driver dt-bindings: mediatek: Add smi dts binding dt-bindings: iommu: Add binding for mediatek IOMMU iommu/ipmmu-vmsa: Use ARCH_RENESAS iommu/exynos: Support multiple attach_device calls iommu/exynos: Add Maintainers entry for Exynos SYSMMU driver iommu/exynos: Add support for v5 SYSMMU iommu/exynos: Update device tree documentation iommu/exynos: Add support for SYSMMU controller with bogus version reg ...
2016-03-09qe: Make cpm_muram_alloc_common staticSaurabh Sengar
as cpm_muram_alloc_common is used only in this file, making it static Signed-off-by: Saurabh Sengar <saurabh.truth@gmail.com> Signed-off-by: Scott Wood <oss@buserror.net>
2016-02-25memory: mediatek: Add SMI driverYong Wu
This patch add SMI(Smart Multimedia Interface) driver. This driver is responsible to enable/disable iommu and control the power domain and clocks of each local arbiter. Signed-off-by: Yong Wu <yong.wu@mediatek.com> Tested-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Daniel Kurtz <djkurtz@chromium.org> Tested-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2016-01-21Merge tag 'armsoc-drivers' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Olof Johansson: "Driver updates for ARM SoCs. Some for SoC-family code under drivers/soc, but also some other driver updates that don't belong anywhere else. We also bring in the drivers/reset code through arm-soc. Some of the larger updates: - Qualcomm support for SMEM, SMSM, SMP2P. All used to communicate with other parts of the chip/board on these platforms, all proprietary protocols that don't fit into other subsystems and live in drivers/soc for now. - System bus driver for UniPhier - Driver for the TI Wakeup M3 IPC device - Power management for Raspberry PI + Again a bunch of other smaller updates and patches" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (38 commits) bus: uniphier: allow only built-in driver ARM: bcm2835: clarify RASPBERRYPI_FIRMWARE dependency MAINTAINERS: Drop Kumar Gala from QCOM bus: uniphier-system-bus: add UniPhier System Bus driver ARM: bcm2835: add rpi power domain driver dt-bindings: add rpi power domain driver bindings ARM: bcm2835: Define two new packets from the latest firmware. drivers/soc: make mediatek/mtk-scpsys.c explicitly non-modular soc: mediatek: SCPSYS: Add regulator support MAINTAINERS: Change QCOM entries soc: qcom: smd-rpm: Add existing platform support memory/tegra: Add number of TLB lines for Tegra124 reset: hi6220: fix modular build soc: qcom: Introduce WCNSS_CTRL SMD client ARM: qcom: select ARM_CPU_SUSPEND for power management MAINTAINERS: Add rules for Qualcomm dts files soc: qcom: enable smsm/smp2p modular build serial: msm_serial: Make config tristate soc: qcom: smp2p: Qualcomm Shared Memory Point to Point soc: qcom: smsm: Add driver for Qualcomm SMSM ...
2015-12-22QE: Move QE from arch/powerpc to drivers/socZhao Qiang
ls1 has qe and ls1 has arm cpu. move qe from arch/powerpc to drivers/soc/fsl to adapt to powerpc and arm Signed-off-by: Zhao Qiang <qiang.zhao@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
2015-12-22ARM: bcm2835: Define two new packets from the latest firmware.Eric Anholt
These packets give us direct access to the firmware's power management code, as opposed to GET/SET_POWER_STATE packets that only had a couple of domains implemented. Signed-off-by: Eric Anholt <eric@anholt.net> Reviewed-by: Kevin Hilman <khilman@linaro.org>
2015-11-10Merge tag 'armsoc-drivers' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Olof Johansson: "As we've enabled multiplatform kernels on ARM, and greatly done away with the contents under arch/arm/mach-*, there's still need for SoC-related drivers to go somewhere. Many of them go in through other driver trees, but we still have drivers/soc to hold some of the "doesn't fit anywhere" lowlevel code that might be shared between ARM and ARM64 (or just in general makes sense to not have under the architecture directory). This branch contains mostly such code: - Drivers for qualcomm SoCs for SMEM, SMD and SMD-RPM, used to communicate with power management blocks on these SoCs for use by clock, regulator and bus frequency drivers. - Allwinner Reduced Serial Bus driver, again used to communicate with PMICs. - Drivers for ARM's SCPI (System Control Processor). Not to be confused with PSCI (Power State Coordination Interface). SCPI is used to communicate with the assistant embedded cores doing power management, and we have yet to see how many of them will implement this for their hardware vs abstracting in other ways (or not at all like in the past). - To make confusion between SCPI and PSCI more likely, this release also includes an update of PSCI to interface version 1.0. - Rockchip support for power domains. - A driver to talk to the firmware on Raspberry Pi" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (57 commits) soc: qcom: smd-rpm: Correct size of outgoing message bus: sunxi-rsb: Add driver for Allwinner Reduced Serial Bus bus: sunxi-rsb: Add Allwinner Reduced Serial Bus (RSB) controller bindings ARM: bcm2835: add mutual inclusion protection drivers: psci: make PSCI 1.0 functions initialization version dependent dt-bindings: Correct paths in Rockchip power domains binding document soc: rockchip: power-domain: don't try to print the clock name in error case soc: qcom/smem: add HWSPINLOCK dependency clk: berlin: add cpuclk ARM: berlin: dts: add CLKID_CPU for BG2Q ARM: bcm2835: Add the Raspberry Pi firmware driver soc: qcom: smem: Move RPM message ram out of smem DT node soc: qcom: smd-rpm: Correct the active vs sleep state flagging soc: qcom: smd: delete unneeded of_node_put firmware: qcom-scm: build for correct architecture level soc: qcom: smd: Correct SMEM items for upper channels qcom-scm: add missing prototype for qcom_scm_is_available() qcom-scm: fix endianess issue in __qcom_scm_is_call_available soc: qcom: smd: Reject send of too big packets soc: qcom: smd: Handle big endian CPUs ...
2015-10-24ARM: bcm2835: add mutual inclusion protectionAlexander Aring
This patch adds mutual inclusion protection for the rpi firmware header. Cc: Eric Anholt <eric@anholt.net> Cc: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2015-10-14ARM: bcm2835: Add the Raspberry Pi firmware driverEric Anholt
This gives us a function for making mailbox property channel requests of the firmware, which is most notable in that it will let us get and set clock rates. Signed-off-by: Eric Anholt <eric@anholt.net> Acked-by: Stephen Warren <swarren@wwwdotorg.org>
2015-09-14soc: add stubs for brcmstb SoC'sBrian Norris
Used on BCM7xxx Set-Top Box chips (e.g., BCM7445). Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2015-09-09Merge tag 'iommu-updates-v4.3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu updates for from Joerg Roedel: "This time the IOMMU updates are mostly cleanups or fixes. No big new features or drivers this time. In particular the changes include: - Bigger cleanup of the Domain<->IOMMU data structures and the code that manages them in the Intel VT-d driver. This makes the code easier to understand and maintain, and also easier to keep the data structures in sync. It is also a preparation step to make use of default domains from the IOMMU core in the Intel VT-d driver. - Fixes for a couple of DMA-API misuses in ARM IOMMU drivers, namely in the ARM and Tegra SMMU drivers. - Fix for a potential buffer overflow in the OMAP iommu driver's debug code - A couple of smaller fixes and cleanups in various drivers - One small new feature: Report domain-id usage in the Intel VT-d driver to easier detect bugs where these are leaked" * tag 'iommu-updates-v4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (83 commits) iommu/vt-d: Really use upper context table when necessary x86/vt-d: Fix documentation of DRHD iommu/fsl: Really fix init section(s) content iommu/io-pgtable-arm: Unmap and free table when overwriting with block iommu/io-pgtable-arm: Move init-fn declarations to io-pgtable.h iommu/msm: Use BUG_ON instead of if () BUG() iommu/vt-d: Access iomem correctly iommu/vt-d: Make two functions static iommu/vt-d: Use BUG_ON instead of if () BUG() iommu/vt-d: Return false instead of 0 in irq_remapping_cap() iommu/amd: Use BUG_ON instead of if () BUG() iommu/amd: Make a symbol static iommu/amd: Simplify allocation in irq_remapping_alloc() iommu/tegra-smmu: Parameterize number of TLB lines iommu/tegra-smmu: Factor out tegra_smmu_set_pde() iommu/tegra-smmu: Extract tegra_smmu_pte_get_use() iommu/tegra-smmu: Use __GFP_ZERO to allocate zeroed pages iommu/tegra-smmu: Remove PageReserved manipulation iommu/tegra-smmu: Convert to use DMA API iommu/tegra-smmu: smmu_flush_ptc() wants device addresses ...
2015-08-21Merge tag 'tegra-for-4.3-memory' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/drivers ARM: tegra: Memory controller updates for v4.3-rc1 Adds support for Tegra210, which allows the SMMU to be used on this new SoC generation. * tag 'tegra-for-4.3-memory' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: memory: tegra: Add Tegra210 support memory: tegra: Add support for a variable-size client ID bitfield memory: tegra: Expose supported rates via debugfs Signed-off-by: Olof Johansson <olof@lixom.net>
2015-08-13iommu/tegra-smmu: Parameterize number of TLB linesThierry Reding
The number of TLB lines was increased from 16 on Tegra30 to 32 on Tegra114 and later. Parameterize the value so that the initial default can be set accordingly. On Tegra30, initializing the value to 32 would effectively disable the TLB and hence cause massive latencies for memory accesses translated through the SMMU. This is especially noticeable for isochronuous clients such as display, whose FIFOs would continuously underrun. Fixes: 891846516317 ("memory: Add NVIDIA Tegra memory controller support") Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-08-13memory: tegra: Add support for a variable-size client ID bitfieldPaul Walmsley
Recent versions of the Tegra MC hardware extend the size of the client ID bitfield in the MC_ERR_STATUS register by one bit. While one could simply extend the bitfield for older hardware, that would allow data from reserved bits into the driver code, which is generally a bad idea on principle. So this patch instead passes in the client ID mask from from the per-SoC MC data. There's no MC support for T210 (yet), but when that support winds up in the kernel, the appropriate soc->client_id_mask value for that chip will be 0xff. Based on an original patch by David Ung <davidu@nvidia.com>. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Paul Walmsley <pwalmsley@nvidia.com> Cc: Thierry Reding <treding@nvidia.com> Cc: David Ung <davidu@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-08-13iommu/tegra-smmu: Move flush_dcache to tegra-smmu.cRussell King
Drivers should not be using __cpuc_* functions nor outer_cache_flush() directly. This change partly cleans up tegra-smmu.c. The only difference between cache handling of the tegra variants is Denver, which omits the call to outer_cache_flush(). This is due to Denver being an ARM64 CPU, and the ARM64 architecture does not provide this function. (This, in itself, is a good reason why these should not be used.) Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> [treding@nvidia.com: fix build failure on 64-bit ARM] Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-07-16soc/tegra: fuse: Rename core_* to soc_*Thierry Reding
There's a mixture of core_* and soc_* prefixes for variables storing information related to the VDD_CORE rail. Choose one (soc_*) and use it more consistently. Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-07-16soc/tegra: fuse: Add Tegra210 supportThierry Reding
Add Tegra210 support to the fuses driver and add Tegra210-specific speedo definitions. Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-07-16soc/tegra: pmc: Add Tegra210 supportThierry Reding
Tegra210 uses a power management controller that is compatible with earlier SoC generations but adds a couple of power partitions for new hardware blocks. Reviewed-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-06-26Merge branch 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds
Pull ARM updates from Russell King: "Bigger items included in this update are: - A series of updates from Arnd for ARM randconfig build failures - Updates from Dmitry for StrongARM SA-1100 to move IRQ handling to drivers/irqchip/ - Move ARMs SP804 timer to drivers/clocksource/ - Perf updates from Mark Rutland in preparation to move the ARM perf code into drivers/ so it can be shared with ARM64. - MCPM updates from Nicolas - Add support for taking platform serial number from DT - Re-implement Keystone2 physical address space switch to conform to architecture requirements - Clean up ARMv7 LPAE code, which goes in hand with the Keystone2 changes. - L2C cleanups to avoid unlocking caches if we're prevented by the secure support to unlock. - Avoid cleaning a potentially dirty cache containing stale data on CPU initialisation - Add ARM-only entry point for secondary startup (for machines that can only call into a Thumb kernel in ARM mode). Same thing is also done for the resume entry point. - Provide arch_irqs_disabled via asm-generic - Enlarge ARMv7M vector table - Always use BFD linker for VDSO, as gold doesn't accept some of the options we need. - Fix an incorrect BSYM (for Thumb symbols) usage, and convert all BSYM compiler macros to a "badr" (for branch address). - Shut up compiler warnings provoked by our cmpxchg() implementation. - Ensure bad xchg sizes fail to link" * 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: (75 commits) ARM: Fix build if CLKDEV_LOOKUP is not configured ARM: fix new BSYM() usage introduced via for-arm-soc branch ARM: 8383/1: nommu: avoid deprecated source register on mov ARM: 8391/1: l2c: add options to overwrite prefetching behavior ARM: 8390/1: irqflags: Get arch_irqs_disabled from asm-generic ARM: 8387/1: arm/mm/dma-mapping.c: Add arm_coherent_dma_mmap ARM: 8388/1: tcm: Don't crash when TCM banks are protected by TrustZone ARM: 8384/1: VDSO: force use of BFD linker ARM: 8385/1: VDSO: group link options ARM: cmpxchg: avoid warnings from macro-ized cmpxchg() implementations ARM: remove __bad_xchg definition ARM: 8369/1: ARMv7M: define size of vector table for Vybrid ARM: 8382/1: clocksource: make ARM_TIMER_SP804 depend on GENERIC_SCHED_CLOCK ARM: 8366/1: move Dual-Timer SP804 driver to drivers/clocksource ARM: 8365/1: introduce sp804_timer_disable and remove arm_timer.h inclusion ARM: 8364/1: fix BE32 module loading ARM: 8360/1: add secondary_startup_arm prototype in header file ARM: 8359/1: correct secondary_startup_arm mode ARM: proc-v7: sanitise and document registers around errata ARM: proc-v7: clean up MIDR access ...
2015-06-26Merge tag 'armsoc-drivers' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Kevin Hilman: "Some of these are for drivers/soc, where we're now putting SoC-specific drivers these days. Some are for other driver subsystems where we have received acks from the appropriate maintainers. Some highlights: - simple-mfd: document DT bindings and misc updates - migrate mach-berlin to simple-mfd for clock, pinctrl and reset - memory: support for Tegra132 SoC - memory: introduce tegra EMC driver for scaling memory frequency - misc. updates for ARM CCI and CCN busses" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (48 commits) drivers: soc: sunxi: Introduce SoC driver to map SRAMs arm-cci: Add aliases for PMU events arm-cci: Add CCI-500 PMU support arm-cci: Sanitise CCI400 PMU driver specific code arm-cci: Abstract handling for CCI events arm-cci: Abstract out the PMU counter details arm-cci: Cleanup PMU driver code arm-cci: Do not enable CCI-400 PMU by default firmware: qcom: scm: Add HDCP Support ARM: berlin: add an ADC node for the BG2Q ARM: berlin: remove useless chip and system ctrl compatibles clk: berlin: drop direct of_iomap of nodes reg property ARM: berlin: move BG2Q clock node ARM: berlin: move BG2CD clock node ARM: berlin: move BG2 clock node clk: berlin: prepare simple-mfd conversion pinctrl: berlin: drop SoC stub provided regmap ARM: berlin: move pinctrl to simple-mfd nodes pinctrl: berlin: prepare to use regmap provided by syscon reset: berlin: drop arch_initcall initialization ...
2015-06-26Merge tag 'armsoc-soc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform support updates from Kevin Hilman: "Our SoC branch usually contains expanded support for new SoCs and other core platform code. Some highlights from this round: - sunxi: SMP support for A23 SoC - socpga: big-endian support - pxa: conversion to common clock framework - bcm: SMP support for BCM63138 - imx: support new I.MX7D SoC - zte: basic support for ZX296702 SoC" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (134 commits) ARM: zx: Add basic defconfig support for ZX296702 ARM: dts: zx: add an initial zx296702 dts and doc clk: zx: add clock support to zx296702 dt-bindings: Add #defines for ZTE ZX296702 clocks ARM: socfpga: fix build error due to secondary_startup MAINTAINERS: ARM64: EXYNOS: Extend entry for ARM64 DTS ARM: ep93xx: simone: support for SPI-based MMC/SD cards MAINTAINERS: update Shawn's email to use kernel.org one ARM: socfpga: support suspend to ram ARM: socfpga: add CPU_METHOD_OF_DECLARE for Arria 10 ARM: socfpga: use CPU_METHOD_OF_DECLARE for socfpga_cyclone5 ARM: EXYNOS: register power domain driver from core_initcall ARM: EXYNOS: use PS_HOLD based poweroff for all supported SoCs ARM: SAMSUNG: Constify platform_device_id ARM: EXYNOS: Constify irq_domain_ops ARM: EXYNOS: add coupled cpuidle support for Exynos3250 ARM: EXYNOS: add exynos_get_boot_addr() helper ARM: EXYNOS: add exynos_set_boot_addr() helper ARM: EXYNOS: make exynos_core_restart() less verbose ARM: EXYNOS: fix exynos_boot_secondary() return value on timeout ...
2015-06-10Merge tag 'imx-soc-4.2' of ↵Kevin Hilman
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/soc The i.MX SoC updates for 4.2: - Add new SoC i.MX7D support, which integrates two Cortex-A7 and one Cortex-M4 cores. - Support suspend from IRAM on i.MX53, so that DDR pins can be set to high impedance for more power saving during suspend. - Move i.MX clock drivers from arch/arm/mach-imx to drivers/clk/imx. - Move i.MX GPT timer driver from arch/arm/mach-imx into drivers/clocksource. - A couple of clock driver update for VF610 and i.MX6Q. - A few random code correction and improvement. * tag 'imx-soc-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (44 commits) ARM: imx: imx7d requires anatop clocksource: timer-imx-gpt: remove include of <asm/mach/time.h> ARM: imx: move timer driver into drivers/clocksource ARM: imx: remove platform headers from timer driver ARM: imx: provide gpt device specific irq functions ARM: imx: get rid of variable timer_base ARM: imx: define gpt register offset per device type ARM: imx: move clock event variables into imx_timer ARM: imx: set up .set_next_event hook via imx_gpt_data ARM: imx: setup tctl register in device specific function ARM: imx: initialize gpt device type for DT boot ARM: imx: define an enum for gpt timer device type ARM: imx: move timer resources into a structure ARM: imx: use relaxed IO accessor in timer driver ARM: imx: make imx51/3 suspend optional ARM: clk-imx6q: refine sata's parent ARM: imx: clk-v610: Add clock for I2C2 and I2C3 ARM: mach-imx: iomux-imx31: Use DECLARE_BITMAP ARM: imx: add imx7d clk tree support ARM: clk: imx: update pllv3 to support imx7 ... Conflicts: arch/arm/mach-imx/Kconfig
2015-06-03ARM: imx: define an enum for gpt timer device typeShawn Guo
Define an enum for gpt timer device type in include/soc/imx/timer.h to tell the gpt block differences among SoCs. Update non-DT users (clock drivers) to pass the device type. As we now have include/soc/imx/timer.h, the declaration of mxc_timer_init() is moved into there as the best fit. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-06-03ARM: imx: move revision definitions and declarations into a headerShawn Guo
The revision definitions and declarations are widely used by clock drivers. As a step of moving clock drivers out of arch/arm/mach-imx, let's create header include/soc/imx/revision.h to accommodate them. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-05-20ARM: at91: remove at91rm9200_sdramc.hAlexandre Belloni
include/soc/at91/at91rm9200_sdramc.h is replaced by include/linux/mfd/syscon/atmel-smc.h as this is actually a syscon device. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-05-18ARM: 8361/1: sa1100: add platform functions to handle PWER settingsDmitry Eremin-Solenikov
PWER settings logically belongs neither to GPIO nor to system IRQ code. Add special functions to handle PWER (for GPIO and for system IRQs) from platform code. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-05-13Merge tag 'tegra-for-4.2-emc' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/drivers Merge "ARM: tegra: Add EMC driver for v4.2-rc1" from Thierry Reding: This introduces the EMC driver that's required to scale the external memory frequency. * tag 'tegra-for-4.2-emc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: memory: tegra: Add EMC frequency debugfs entry memory: tegra: Add EMC (external memory controller) driver memory: tegra: Add API needed by the EMC driver of: Add Tegra124 EMC bindings of: Document timings subnode of nvidia,tegra-mc
2015-05-13Merge tag 'tegra-for-4.2-ramcode' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/drivers Merge "ARM: tegra: RAM code access for v4.2-rc1" from Thierry Reding: The RAM code is used by the memory and external memory controllers to determine which set of timings to use for memory frequency scaling. * tag 'tegra-for-4.2-ramcode' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: soc/tegra: fuse: Add RAM code reader helper of: Document long-ram-code property in nvidia,tegra20-apbmisc
2015-05-05memory: tegra: Add EMC (external memory controller) driverMikko Perttunen
Implements functionality needed to change the rate of the memory bus clock. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-05-05memory: tegra: Add API needed by the EMC driverMikko Perttunen
The EMC driver needs to know the number of external memory devices and also needs to update the EMEM configuration based on the new rate of the memory bus. To know how to update the EMEM config, looks up the values of the burst regs in the DT, for a given timing. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-05-04soc/tegra: pmc: move to using a restart handlerDavid Riley
The pmc driver was previously exporting tegra_pmc_restart, which was assigned to machine_desc.init_machine, taking precedence over the restart handlers registered through register_restart_handler(). Signed-off-by: David Riley <davidriley@chromium.org> [tomeu.vizoso@collabora.com: Rebased] Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Acked-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Alexandre Courbot <acourbot@nvidia.com> [treding@nvidia.com: minor cleanups] Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-05-04soc/tegra: fuse: Add RAM code reader helperMikko Perttunen
Needed for the EMC and MC drivers to know what timings from the DT to use. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-05-04iommu/tegra-smmu: Add debugfs supportThierry Reding
Provide clients and swgroups files in debugfs. These files show for which clients IOMMU translation is enabled and which ASID is associated with each SWGROUP. Cc: Hiroshi Doyu <hdoyu@nvidia.com> Acked-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-05-04memory: tegra: Add SWGROUP namesThierry Reding
Subsequent patches will add debugfs files that print the status of the SWGROUPs. Add a new names field and complement the SoC tables with the names of the individual SWGROUPs. Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-03-03pm: at91: Workaround DDRSDRC self-refresh bug with LPDDR1 memories.Peter Rosin
The DDRSDR controller fails miserably to put LPDDR1 memories in self-refresh. Force the controller to think it has DDR2 memories during the self-refresh period, as the DDR2 self-refresh spec is equivalent to LPDDR1, and is correctly implemented in the controller. Assume that the second controller has the same fault, but that is untested. Signed-off-by: Peter Rosin <peda@axentia.se> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-01-09soc/tegra: Add Tegra132 supportThierry Reding
Add the chip ID for the NVIDIA Tegra132 SoC family. Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-01-09soc/tegra: pmc: restrict compilation of suspend-related support to ARMPaul Walmsley
Tegra SoCs with 64-bit ARM support don't currently support deep CPU low-power states in mainline Linux. When this support is added in the future, it will probably look rather different from the existing 32-bit ARM support, since the ARM64 maintainers' strong preference is to use PSCI to implement it. So, for the time being, prevent the CPU suspend-related code and data in the Tegra PMC driver from compiling on ARM64. Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Paul Walmsley <pwalmsley@nvidia.com> Cc: Thierry Reding <treding@nvidia.com> Cc: Allen Martin <amartin@nvidia.com> Cc: Stephen Warren <swarren@nvidia.com> Cc: Alexandre Courbot <gnurou@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-12-08Merge branch 'at91/cleanup5' into next/driversArnd Bergmann
The at91 cleanups changed a lot of files, this merges in the latest cleanups to resolve the conflicts Conflicts: arch/arm/mach-at91/at91sam9260.c arch/arm/mach-at91/at91sam9261.c arch/arm/mach-at91/at91sam9263.c arch/arm/mach-at91/clock.c arch/arm/mach-at91/clock.h drivers/rtc/Kconfig Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-12-04memory: Add NVIDIA Tegra memory controller supportThierry Reding
The memory controller on NVIDIA Tegra exposes various knobs that can be used to tune the behaviour of the clients attached to it. Currently this driver sets up the latency allowance registers to the HW defaults. Eventually an API should be exported by this driver (via a custom API or a generic subsystem) to allow clients to register latency requirements. This driver also registers an IOMMU (SMMU) that's implemented by the memory controller. It is supported on Tegra30, Tegra114 and Tegra124 currently. Tegra20 has a GART instead. The Tegra SMMU operates on memory clients and SWGROUPs. A memory client is a unidirectional, special-purpose DMA master. A SWGROUP represents a set of memory clients that form a logical functional unit corresponding to a single device. Typically a device has two clients: one client for read transactions and one client for write transactions, but there are also devices that have only read clients, but many of them (such as the display controllers). Because there is no 1:1 relationship between memory clients and devices the driver keeps a table of memory clients and the SWGROUPs that they belong to per SoC. Note that this is an exception and due to the fact that the SMMU is tightly integrated with the rest of the Tegra SoC. The use of these tables is discouraged in drivers for generic IOMMU devices such as the ARM SMMU because the same IOMMU could be used in any number of SoCs and keeping such tables for each SoC would not scale. Acked-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-11-13ARM: at91: move sdramc/ddrsdr header to include/soc/at91Alexandre Belloni
Move the (DDR) SDRAM controller headers to include/soc/at91 to remove the dependency on mach/ headers from the at91-reset driver. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-07-17ARM: tegra: Convert PMC to a driverThierry Reding
This commit converts the PMC support code to a platform driver. Because the boot process needs to call into this driver very early, also set up a minimal environment via an early initcall. Signed-off-by: Thierry Reding <treding@nvidia.com>