summaryrefslogtreecommitdiff
path: root/include/target
AgeCommit message (Collapse)Author
2015-03-20target: do not reject FUA CDBs when write cache is enabled but ↵Christophe Vu-Brugier
emulate_write_cache is 0 A check that rejects a CDB with FUA bit set if no write cache is emulated was added by the following commit: fde9f50 target: Add sanity checks for DPO/FUA bit usage The condition is as follows: if (!dev->dev_attrib.emulate_fua_write || !dev->dev_attrib.emulate_write_cache) However, this check is wrong if the backend device supports WCE but "emulate_write_cache" is disabled. This patch uses se_dev_check_wce() (previously named spc_check_dev_wce) to invoke transport->get_write_cache() if the device has a write cache or check the "emulate_write_cache" attribute otherwise. Reported-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christophe Vu-Brugier <cvubrugier@fastmail.fm> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-02-21Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending Pull SCSI target updates from Nicholas Bellinger: "The highlights this round include: - Update vhost-scsi to support F_ANY_LAYOUT using mm/iov_iter.c logic, and signal VERSION_1 support (MST + Viro + nab) - Fix iscsi/iser-target to remove problematic active_ts_set usage (Gavin Guo) - Update iscsi/iser-target to support multi-sequence sendtargets (Sagi) - Fix original PR_APTPL_BUF_LEN 8k size limitation (Martin Svec) - Add missing WRITE_SAME end-of-device sanity check (Bart) - Check for LBA + sectors wrap-around in sbc_parse_cdb() (nab) - Other various minor SPC/SBC compliance fixes based upon Ronnie Sahlberg test suite (nab)" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (32 commits) target: Set LBPWS10 bit in Logical Block Provisioning EVPD target: Fail UNMAP when emulate_tpu=0 target: Fail WRITE_SAME w/ UNMAP=1 when emulate_tpws=0 target: Add sanity checks for DPO/FUA bit usage target: Perform PROTECT sanity checks for WRITE_SAME target: Fail I/O with PROTECT bit when protection is unsupported target: Check for LBA + sectors wrap-around in sbc_parse_cdb target: Add missing WRITE_SAME end-of-device sanity check iscsi-target: Avoid IN_LOGOUT failure case for iser-target target: Fix PR_APTPL_BUF_LEN buffer size limitation iscsi-target: Drop problematic active_ts_list usage iscsi/iser-target: Support multi-sequence sendtargets text response iser-target: Remove duplicate function names vhost/scsi: potential memory corruption vhost/scsi: Global tcm_vhost -> vhost_scsi rename vhost/scsi: Drop left-over scsi_tcq.h include vhost/scsi: Set VIRTIO_F_ANY_LAYOUT + VIRTIO_F_VERSION_1 feature bits vhost/scsi: Add ANY_LAYOUT support in vhost_scsi_handle_vq vhost/scsi: Add ANY_LAYOUT iov -> sgl mapping prerequisites vhost/scsi: Change vhost_scsi_map_to_sgl to accept iov ptr + len ...
2015-02-12target: Fix PR_APTPL_BUF_LEN buffer size limitationNicholas Bellinger
This patch addresses the original PR_APTPL_BUF_LEN = 8k limitiation for write-out of PR APTPL metadata that Martin has recently been running into. It changes core_scsi3_update_and_write_aptpl() to use vzalloc'ed memory instead of kzalloc, and increases the default hardcoded length to 256k. It also adds logic in core_scsi3_update_and_write_aptpl() to double the original length upon core_scsi3_update_aptpl_buf() failure, and retries until the vzalloc'ed buffer is large enough to accommodate the outgoing APTPL metadata. Reported-by: Martin Svec <martin.svec@zoner.cz> Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-02-12iscsi/iser-target: Support multi-sequence sendtargets text responseSagi Grimberg
In case sendtargets response is larger than initiator MRDSL, we send a partial sendtargets response (setting F=0, C=1, TTT!=0xffffffff), accept a consecutive empty text message and send the rest of the payload. In case we are done, we set F=1, C=0, TTT=0xffffffff. We do that by storing the sendtargets response bytes done under the session. This patch also makes iscsit_find_cmd_from_itt public for isert. (Re-add cmd->maxcmdsn_inc and clear in iscsit_build_text_rsp - nab) Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-02-04iscsi-target: Introduce session_get_next_tttSagi Grimberg
Reduce code duplication. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-01-30iscsi-target: Move iscsi_target_[core,stat].h under linux includeSagi Grimberg
Seems strange to see in include/target/iscsi/iscsi_transport.h: include "../../../drivers/target/iscsi/iscsi_target_core.h" Move it to it's natural location. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-01-09target: Drop left-over fabric_max_sectors attributeNicholas Bellinger
Now that fabric_max_sectors is no longer used to enforce the maximum I/O size, go ahead and drop it's left-over usage in target-core and associated backend drivers. Cc: Christoph Hellwig <hch@lst.de> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-12-20Merge tag 'scsi-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI update from James Bottomley: "This is a much shorter set of patches that were on the go but didn't make it in to the early pull request for the merge window. It's really a set of bug fixes plus some final cleanup work on the new tag queue API" * tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: storvsc: ring buffer failures may result in I/O freeze ipr: set scsi_level correctly for disk arrays ipr: add support for async scanning to speed up boot scsi_debug: fix missing "break;" in SDEBUG_UA_CAPACITY_CHANGED case scsi_debug: take sdebug_host_list_lock when changing capacity scsi_debug: improve driver description in Kconfig scsi_debug: fix compare and write errors qla2xxx: fix race in handling rport deletion during recovery causes panic scsi: blacklist RSOC for Microsoft iSCSI target devices scsi: fix random memory corruption with scsi-mq + T10 PI Revert "[SCSI] mpt3sas: Remove phys on topology change" Revert "[SCSI] mpt2sas: Remove phys on topology change." esas2r: Correct typos of "validate" in a comment fc: FCP_PTA_SIMPLE is 0 ibmvfc: remove unused tag variable scsi: remove MSG_*_TAG defines scsi: remove scsi_set_tag_type scsi: remove scsi_get_tag_type scsi: never drop to untagged mode during queue ramp down scsi: remove ->change_queue_type method
2014-12-04scsi: remove MSG_*_TAG definesChristoph Hellwig
For SPI drivers use the message definitions from scsi.h, and for target drivers introduce a new TCM_*_TAG namespace. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com
2014-12-02target: Add DEF_TB_DEFAULT_ATTRIBS macro for virtual device attrsNicholas Bellinger
This helper macro adds the default set of 30 device attributes for virtual devices from existing target_core_configfs.c code, and moves the definitions into a single macro to create the structs necessary for backend drivers. It allows them to populate their own external struct configfs_attribute for se_subsystem_api->tb_cits.tb_dev_attrib_cit.ct_attrs. Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-12-02target: Add EXPORT_SYMBOL for existing se_dev_set_*Nicholas Bellinger
Now that target_core_backend_configfs.h macros will be using these se_dev_set attribute functions externally to allow backend drivers to populate different attributes, go ahead and add EXPORT_SYMBOL() for the existing default set of 30 device attributes. Also update target_core_backend.h with proper function prototypes. Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-12-02target: Add target_core_backend_configfs.h helper macrosNicholas Bellinger
This patch adds a number of configfs e-attr macros following what existing target_core_configfs.c code does for internal target_backend_dev_attrib setup, and similar to how target fabric drivers allow for external config_item_type + cit->ct_attrs. assignment. This is useful for backend drivers like PSCSI who need to only expose a small subset of device attributes, while still retaining a default list of attributes for other backend drivers like IBLOCK, FILEIO, RAMDISK, and TCMU. Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-12-02target: Move dev_stat_cit to struct se_subsystem_apiNicholas Bellinger
This patch adds support for dev_stat_cit as an external config_item_type using TB_CIT_SETUP() helper macro, and sets only ct_group_ops following existing code. It updates target_core_make_subdev() + target_core_setup_dev_attrib_cit() + struct target_backend_cits, and drops left-over target_core_dev_stat_cit from target_core_configfs.c code and update comments. This patch introduces no functional change from existing code. Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-12-02target: Move dev_alua_tg_pt_gps_cit to struct se_subsystem_apiNicholas Bellinger
This patch adds support for dev_alua_tg_pt_gps_cit as an external config_item_type using TB_CIT_SETUP() helper macro, and sets only ct_group_ops following existing code. It updates target_core_make_subdev() + target_core_setup_dev_attrib_cit() + struct target_backend_cits, and drops left-over target_core_dev_alua_tg_pt_gps_cit from target_core_configfs.c code and update comments. This patch introduces no functional change from existing code. Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-12-02target: Move dev_wwn_cit to struct se_subsystem_apiNicholas Bellinger
This patch adds support for dev_wwn_cit as an external config_item_type using TB_CIT_SETUP() helper macro, and sets both ct_item_ops + ct_attr following existing code. It updates target_core_make_subdev() + target_core_setup_dev_attrib_cit() + struct target_backend_cits, and drops left-over target_core_dev_wwn_cit from target_core_configfs.c code and update comments. This patch introduces no functional change from existing code. Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-12-02target: Move dev_pr_cit to struct se_subsystem_apiNicholas Bellinger
This patch adds support for dev_pr_cit as an external config_item_type using TB_CIT_SETUP() helper macro, and sets both ct_item_ops + ct_attr following existing code. It updates target_core_make_subdev() + target_core_setup_dev_attrib_cit() + struct target_backend_cits, and drops left-over target_core_dev_pr_cit from target_core_configfs.c code and update comments. This patch introduces no functional change from existing code. Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-12-02target: Move dev_attrib_cit to struct se_subsystem_apiNicholas Bellinger
This patch adds support for dev_attrib_cit as an external config_item_type using TB_CIT_SETUP() helper macro, and sets both ct_item_ops + ct_attr following existing code. It updates target_core_make_subdev() + target_core_setup_dev_attrib_cit() + struct target_backend_cits, and drops left-over target_core_dev_attrib_cit from target_core_configfs.c code and update comments. This patch introduces no functional change from existing code. Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-12-02target: Move dev_cit to struct se_subsystem_apiNicholas Bellinger
This patch adds initial support for dev_cit as external config_item_type. This includes a new struct target_backend_cits to hold the external CITs within struct se_subsystem_api, and target_core_setup_sub_cits() to be used by backend drivers ahead of transport_subsystem_register(). It adds a TB_CIT_SETUP() helper following target_core_fabric_configfs.c to perform the config_item_type assignments. Also, drop left-over target_core_dev_cit from target_core_configfs.c code and update comments. Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-10-04target: Add force_pr_aptpl device attributeNicholas Bellinger
This patch adds a force_pr_aptpl device attribute used to force SPC-3 PR Activate Persistence across Target Power Loss (APTPL) operation. This makes PR metadata write-out occur during state change regardless if new PERSISTENT_RESERVE_OUT CDBs have their APTPL feature bit set. This is useful during H/A failover in active/passive setups where all PR state is being re-created on a different node, driven by configfs backend device + export layout and pre-loaded $DEV/pr/res_aptpl_metadata. Cc: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-10-01target: encapsulate smp_mb__after_atomic()Joern Engel
The target code has a rather generous helping of smp_mb__after_atomic() throughout the code base. Most atomic operations were followed by one and none were preceded by smp_mb__before_atomic(), nor accompanied by a comment explaining the need for a barrier. Instead of trying to prove for every case whether or not it is needed, this patch introduces atomic_inc_mb() and atomic_dec_mb(), which explicitly include the memory barriers before and after the atomic operation. For now they are defined in a target header, although they could be of general use. Most of the existing atomic/mb combinations were replaced by the new helpers. In a few cases the atomic was sandwiched in spin_lock/spin_unlock and I simply removed the barrier. I suspect that in most cases the correct conversion would have been to drop the barrier. I also suspect that a few cases exist where a) the barrier was necessary and b) a second barrier before the atomic would have been necessary and got added by this patch. Signed-off-by: Joern Engel <joern@logfs.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-06-11target: Report correct response length for some commandsRoland Dreier
When an initiator sends an allocation length bigger than what its command consumes, the target should only return the actual response data and set the residual length to the unused part of the allocation length. Add a helper function that command handlers (INQUIRY, READ CAPACITY, etc) can use to do this correctly, and use this code to get the correct residual for commands that don't use the full initiator allocation in the handlers for READ CAPACITY, READ CAPACITY(16), INQUIRY, MODE SENSE and REPORT LUNS. This addresses a handful of failures as reported by Christophe with the Windows Certification Kit: http://permalink.gmane.org/gmane.linux.scsi.target.devel/6515 Signed-off-by: Roland Dreier <roland@purestorage.com> Tested-by: Christophe Vu-Brugier <cvubrugier@yahoo.fr> Cc: stable@vger.kernel.org # 3.10+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-06-11Target/iscsi: Fix sendtargets response pdu for iser transportSagi Grimberg
In case the transport is iser we should not include the iscsi target info in the sendtargets text response pdu. This causes sendtargets response to include the target info twice. Modify iscsit_build_sendtargets_response to filter transport types that don't match. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Reported-by: Slava Shwartsman <valyushash@gmail.com> Cc: stable@vger.kernel.org # 3.11+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-04-07target/sbc: Add sbc_dif_read_strip software emulationNicholas Bellinger
Split up __sbc_dif_verify_read() so that VERIFY READ emulation can perform target-core specific READ_STRIP, seperate from the existing FILEIO/RAMDISK backend emulation code. Also add sbc_dif_read_strip() in order to determine number of sectors using cmd->prot_length, and skip the extra sbc_dif_copy_prot(). Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Cc: Quinn Tran <quinn.tran@qlogic.com> Cc: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-04-07target/sbc: Add sbc_dif_generate software emulationNicholas Bellinger
This patch adds WRITE_INSERT emulation within target-core using TYPE1 / TYPE3 PI modes in sbc_dif_generate() code. This is useful in order for existing legacy fabrics that do not support protection offloads to interact with backend devices that currently have T10 PI enabled. v2 changes: - Rename to sbc_dif_generate() (Sagi) Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Cc: Quinn Tran <quinn.tran@qlogic.com> Cc: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-04-07target: Pass in transport supported PI at session initializationNicholas Bellinger
In order to support local WRITE_INSERT + READ_STRIP operations for non PI enabled fabrics, the fabric driver needs to be able signal what protection offload operations are supported. This is done at session initialization time so the modes can be signaled by individual se_wwn + se_portal_group endpoints, as well as optionally across different transports on the same endpoint. For iser-target, set TARGET_PROT_ALL if the underlying ib_device has already signaled PI offload support, and allow this to be exposed via a new iscsit_transport->iscsit_get_sup_prot_ops() callback. For loopback, set TARGET_PROT_ALL to signal SCSI initiator mode operation. For all other drivers, set TARGET_PROT_NORMAL to disable fabric level PI. Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Cc: Quinn Tran <quinn.tran@qlogic.com> Cc: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-04-07target: Add TFO->abort_task for aborted task resources releaseNicholas Bellinger
Now that TASK_ABORTED status is not generated for all cases by TMR ABORT_TASK + LUN_RESET, a new TFO->abort_task() caller is necessary in order to give fabric drivers a chance to unmap hardware / software resources before the se_cmd descriptor is released via the normal TFO->release_cmd() codepath. This patch adds TFO->aborted_task() in core_tmr_abort_task() in place of the original transport_send_task_abort(), and also updates all fabric drivers to implement this caller. The fabric drivers that include changes to perform cleanup via ->aborted_task() are: - iscsi-target - iser-target - srpt - tcm_qla2xxx The fabric drivers that currently set ->aborted_task() to NOPs are: - loopback - tcm_fc - usb-gadget - sbp-target - vhost-scsi For the latter five, there appears to be no additional cleanup required before invoking TFO->release_cmd() to release the se_cmd descriptor. v2 changes: - Move ->aborted_task() call into transport_cmd_finish_abort (Alex) Cc: Alex Leung <amleung21@yahoo.com> Cc: Mark Rustad <mark.d.rustad@intel.com> Cc: Roland Dreier <roland@kernel.org> Cc: Vu Pham <vu@mellanox.com> Cc: Chris Boot <bootc@bootc.net> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Giridhar Malavali <giridhar.malavali@qlogic.com> Cc: Saurav Kashyap <saurav.kashyap@qlogic.com> Cc: Quinn Tran <quinn.tran@qlogic.com> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-04-07target: Fix Task Aborted Status (TAS) handlingAlex Leung
This patch addresses three of long standing issues wrt to Task Aborted Status (TAS) handling. The first is the incorrect assumption in core_tmr_handle_tas_abort() that TASK_ABORTED status is sent for the task referenced by TMR ABORT_TASK, and sending TASK_ABORTED status for TMR LUN_RESET on the same nexus the LUN_RESET was received. The second is to ensure the lun reference count is dropped within transport_cmd_finish_abort() by calling transport_lun_remove_cmd() before invoking transport_cmd_check_stop_to_fabric(). The last is to fix the delayed TAS handling to allow outstanding WRITEs to complete before sending the TASK_ABORTED status. This includes changing transport_check_aborted_status() to avoid processing when SCF_SEND_DELAYED_TAS has not be set, and updating transport_send_task_abort() to drop the SCF_SENT_DELAYED_TAS check. Signed-off-by: Alex Leung <amleung21@yahoo.com> Cc: Alex Leung <amleung21@yahoo.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-04-07Target/core: Remove prot_handover use for nowSagi Grimberg
This is not going to be supported soon - so drop it. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-04-07Target/dif: Introduce protection-passthough-only modeSagi Grimberg
Some transports (iSCSI/iSER/SRP/FC) support hardware INSERT/STRIP capabilities while other transports like loopback/vhost-scsi need perform this is software. This patch allows fabrics using SCF_PASSTHROUGH_SG_TO_MEM_NOALLOC to signal the early LUN scan handling case where PROTECT CDB bits are set, but no fabric buffer has been provided. For transports which use generic new command these buffers have yet to be allocated. Also this way, target may support protection information against legacy initiators (writes are inserted and reads are stripped). (Only set prot_pto for loopback during early special case - nab) Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-03-13Target/sbc: Set protection operation and relevant checksSagi Grimberg
SBC-3 mandates the protection checks that must be performed in the rdprotect/wrprotect field. Use them. According to backstore device pi_attributes and cdb rdprotect/wrprotect field. (Fix incorrect se_cmd->prot_type -> TARGET_PROT_NORMAL comparision in transport_generic_new_cmd - nab) (Fix missing break in sbc_set_prot_op_checks - DanC + Sagi) Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-03-05iscsi/iser-target: Fix isert_conn->state hung shutdown issuesNicholas Bellinger
This patch addresses a couple of different hug shutdown issues related to wait_event() + isert_conn->state. First, it changes isert_conn->conn_wait + isert_conn->conn_wait_comp_err from waitqueues to completions, and sets ISER_CONN_TERMINATING from within isert_disconnect_work(). Second, it splits isert_free_conn() into isert_wait_conn() that is called earlier in iscsit_close_connection() to ensure that all outstanding commands have completed before continuing. Finally, it breaks isert_cq_comp_err() into seperate TX / RX related code, and adds logic in isert_cq_rx_comp_err() to wait for outstanding commands to complete before setting ISER_CONN_DOWN and calling complete(&isert_conn->conn_wait_comp_err). Acked-by: Sagi Grimberg <sagig@mellanox.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Cc: <stable@vger.kernel.org> #3.10+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-02-12target: Simplify command completion by removing CMD_T_FAILED flagRoland Dreier
The CMD_T_FAILED flag is set used in one place to record the result of a trivial test, and it is only tested once, few lines later. We might as well make the code simpler and easier to read by directly doing the test of "success" where we want to use it. Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-01-31Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending Pull SCSI target updates from Nicholas Bellinger: "The highlights this round include: - add support for SCSI Referrals (Hannes) - add support for T10 DIF into target core (nab + mkp) - add support for T10 DIF emulation in FILEIO + RAMDISK backends (Sagi + nab) - add support for T10 DIF -> bio_integrity passthrough in IBLOCK backend (nab) - prep changes to iser-target for >= v3.15 T10 DIF support (Sagi) - add support for qla2xxx N_Port ID Virtualization - NPIV (Saurav + Quinn) - allow percpu_ida_alloc() to receive task state bitmask (Kent) - fix >= v3.12 iscsi-target session reset hung task regression (nab) - fix >= v3.13 percpu_ref se_lun->lun_ref_active race (nab) - fix a long-standing network portal creation race (Andy)" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (51 commits) target: Fix percpu_ref_put race in transport_lun_remove_cmd target/iscsi: Fix network portal creation race target: Report bad sector in sense data for DIF errors iscsi-target: Convert gfp_t parameter to task state bitmask iscsi-target: Fix connection reset hang with percpu_ida_alloc percpu_ida: Make percpu_ida_alloc + callers accept task state bitmask iscsi-target: Pre-allocate more tags to avoid ack starvation qla2xxx: Configure NPIV fc_vport via tcm_qla2xxx_npiv_make_lport qla2xxx: Enhancements to enable NPIV support for QLOGIC ISPs with TCM/LIO. qla2xxx: Fix scsi_host leak on qlt_lport_register callback failure IB/isert: pass scatterlist instead of cmd to fast_reg_mr routine IB/isert: Move fastreg descriptor creation to a function IB/isert: Avoid frwr notation, user fastreg IB/isert: seperate connection protection domains and dma MRs tcm_loop: Enable DIF/DIX modes in SCSI host LLD target/rd: Add DIF protection into rd_execute_rw target/rd: Add support for protection SGL setup + release target/rd: Refactor rd_build_device_space + rd_release_device_space target/file: Add DIF protection support to fd_execute_rw target/file: Add DIF protection init/format support ...
2014-01-30target: Fix percpu_ref_put race in transport_lun_remove_cmdNicholas Bellinger
This patch fixes a percpu_ref_put race for se_lun->lun_ref in transport_lun_remove_cmd() where ->lun_ref could end up being put more than once per command via different target completion and fabric release contexts. It adds a cmpxchg() for se_cmd->lun_ref_active to ensure that percpu_ref_put() is only ever called once per se_cmd. This bug was manifesting itself as a LUN shutdown regression bug in >= v3.13 code, where percpu_ref_kill() would end up hanging indefinately due to the incorrect percpu_ref count. (Change se_cmd->lun_ref_active from bool -> int to force at least a 4-byte cmpxchg with MIPS ll/sc ins. - Fengguang) Reported-by: Tommy Apel <tommyapeldk@gmail.com> Cc: Tommy Apel <tommyapeldk@gmail.com> Cc: <stable@vger.kernel.org> #3.13+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-01-25target: Report bad sector in sense data for DIF errorsSagi Grimberg
SPC-4 states that data-integrity errors shall also report the failed sector in CHECK_CONDITION response sense data information field. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-01-25iscsi-target: Convert gfp_t parameter to task state bitmaskNicholas Bellinger
This patch propigates the use of task state bitmask now used by percpu_ida_alloc() up the iscsi-target callchain, replacing the use of GFP_ATOMIC for TASK_RUNNING, and GFP_KERNEL for TASK_INTERRUPTIBLE. Also, drop the unnecessary gfp_t parameter to isert_allocate_cmd(), and just pass TASK_INTERRUPTIBLE into iscsit_allocate_cmd(). Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-01-18target: Add protection SGLs to target_submit_cmd_map_sglsNicholas Bellinger
This patch adds support to target_submit_cmd_map_sgls() for accepting 'sgl_prot' + 'sgl_prot_count' parameters for DIF protection information. Note the passed parameters are stored at se_cmd->t_prot_sg and se_cmd->t_prot_nents respectively. Also, update tcm_loop and vhost-scsi fabrics usage of target_submit_cmd_map_sgls() to take into account the new parameters. Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-01-18target/sbc: Add DIF TYPE1+TYPE3 read/write verify emulationNicholas Bellinger
This patch adds support for DIF read/write verify emulation for TARGET_DIF_TYPE1_PROT + TARGET_DIF_TYPE3_PROT operation. This includes sbc_dif_verify_write() + sbc_dif_verify_read() calls accessable by backend drivers to perform DIF verify for SGL based data and protection information. Also included is sbc_dif_copy_prot() logic to copy protection information to/from backend provided protection SGLs. Based on scsi_debug.c DIF TYPE1+TYPE3 emulation. v2 changes: - Select CRC_T10DIF for TARGET_CORE in Kconfig (Fengguang) - Drop IP checksum logic from sbc_dif_v1_verify (MKP) - Fix offset on app_tag = 0xffff in sbc_dif_verify_read() Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-01-18target: Add DIF CHECK_CONDITION ASC/ASCQ exception casesNicholas Bellinger
This patch adds support for DIF related CHECK_CONDITION ASC/ASCQ exception cases into transport_send_check_condition_and_sense(). This includes: LOGICAL BLOCK GUARD CHECK FAILED LOGICAL BLOCK APPLICATION TAG CHECK FAILED LOGICAL BLOCK REFERENCE TAG CHECK FAILED that used by DIF TYPE1 and TYPE3 failure cases. Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-01-18target: Add DIF related base definitionsNicholas Bellinger
This patch adds DIF related definitions to target_core_base.h that includes enums for target_prot_op + target_prot_type + target_prot_version + target_guard_type + target_pi_error. Also included is struct se_dif_v1_tuple, along with changes to struct se_cmd, struct se_dev_attrib, and struct se_device. Also, add new se_subsystem_api->[init,format,free]_prot() callers used by target core code to setup backend specific protection information after the device has been configured. Enums taken from Sagi Grimberg's original patch. v2 changes: - Drop guard_type related definitions - Update target_prot_op + target_prot_ho definitions (Sagi) - Drop SCF_PROT + pi_prot_version flag - Add se_subsystem_api->format_prot() (Sagi) - Add hw_pi_prot_type device attribute Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-01-10target: Convert inquiry temporary buffer to heap memoryNicholas Bellinger
This patch converts the temporary buffer in spc_emulate_inquiry() to use dynamically allocated memory, instead of local stack memory. Also bump SE_INQUIRY_BUF up to 1024 bytes to be safe when handling multiple large SCSI name descriptors for EVPD=0x83. Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-01-10target_core_alua: Referrals infrastructureHannes Reinecke
Add infrastructure for referrals. v2 changes: - Fix unsigned long long division in core_alua_state_lba_dependent on 32-bit (Fengguang + Chen + Hannes) - Fix compile warning in core_alua_state_lba_dependent (nab) - Convert segment_* + sectors variables in core_alua_state_lba_dependent to u64 (Hannes) Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-12-19target/file: Update hw_max_sectors based on current block_sizeNicholas Bellinger
This patch allows FILEIO to update hw_max_sectors based on the current max_bytes_per_io. This is required because vfs_[writev,readv]() can accept a maximum of 2048 iovecs per call, so the enforced hw_max_sectors really needs to be calculated based on block_size. This addresses a >= v3.5 bug where block_size=512 was rejecting > 1M sized I/O requests, because FD_MAX_SECTORS was hardcoded to 2048 for the block_size=4096 case. (v2: Use max_bytes_per_io instead of ->update_hw_max_sectors) Reported-by: Henrik Goldman <hg@x-formation.com> Cc: <stable@vger.kernel.org> #3.5+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-12-18target_core_spc: Include target device descriptor in VPD page 83Hannes Reinecke
We should be including a descriptor referring to the target device to allow identification of different TCM instances. (nab: Bump SE_INQUIRY_BUF to 1024 bytes to handle 2x 256 byte SCSI names) Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-12-17target_core_alua: Use workqueue for ALUA transitioningHannes Reinecke
Use a workqueue for processing ALUA state transitions; this allows us to process implicit delay properly. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-12-17target_core_alua: store old and pending ALUA stateHannes Reinecke
During state transition we should be storing both the original and the pending state. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-12-17target_core_alua: Allocate ALUA metadata on demandHannes Reinecke
We should only allocate ALUA metadata if we're actually going to write them. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-12-16target: Remove unused ua_dev_list member in struct se_uaAndy Grover
Initialized but not used. Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-12-11target: Remove write-only stats fields and lock from struct se_node_aclRoland Dreier
Commit 04f3b31bff72 ("iscsi-target: Convert iscsi_session statistics to atomic_long_t") removed the updating of these fields in iscsi (the only fabric driver that ever touched these counters), and the core has no way to report or otherwise use the values. Remove the last remnants of these counters. Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-11-20target_core_alua: Store supported ALUA statesHannes Reinecke
The supported ALUA states might be different for individual devices, so store it in a separate field. (nab: Remove unnecessary line continuation) Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>