| Age | Commit message (Collapse) | Author |
|---|
|
'for-4.1/huion-uclogic-merge', 'for-4.1/i2c-hid', 'for-4.1/kconfig-drop-expert-dependency', 'for-4.1/logitech', 'for-4.1/multitouch', 'for-4.1/rmi', 'for-4.1/sony', 'for-4.1/upstream' and 'for-4.1/wacom' into for-linus
|
|
Using a timer wheel for timewait sockets was nice ~15 years ago when
memory was expensive and machines had a single processor.
This does not scale, code is ugly and source of huge latencies
(Typically 30 ms have been seen, cpus spinning on death_lock spinlock.)
We can afford to use an extra 64 bytes per timewait sock and spread
timewait load to all cpus to have better behavior.
Tested:
On following test, /proc/sys/net/ipv4/tcp_tw_recycle is set to 1
on the target (lpaa24)
Before patch :
lpaa23:~# ./super_netperf 200 -H lpaa24 -t TCP_CC -l 60 -- -p0,0
419594
lpaa23:~# ./super_netperf 200 -H lpaa24 -t TCP_CC -l 60 -- -p0,0
437171
While test is running, we can observe 25 or even 33 ms latencies.
lpaa24:~# ping -c 1000 -i 0.02 -qn lpaa23
...
1000 packets transmitted, 1000 received, 0% packet loss, time 20601ms
rtt min/avg/max/mdev = 0.020/0.217/25.771/1.535 ms, pipe 2
lpaa24:~# ping -c 1000 -i 0.02 -qn lpaa23
...
1000 packets transmitted, 1000 received, 0% packet loss, time 20702ms
rtt min/avg/max/mdev = 0.019/0.183/33.761/1.441 ms, pipe 2
After patch :
About 90% increase of throughput :
lpaa23:~# ./super_netperf 200 -H lpaa24 -t TCP_CC -l 60 -- -p0,0
810442
lpaa23:~# ./super_netperf 200 -H lpaa24 -t TCP_CC -l 60 -- -p0,0
800992
And latencies are kept to minimal values during this load, even
if network utilization is 90% higher :
lpaa24:~# ping -c 1000 -i 0.02 -qn lpaa23
...
1000 packets transmitted, 1000 received, 0% packet loss, time 19991ms
rtt min/avg/max/mdev = 0.023/0.064/0.360/0.042 ms
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
portid is an unsigned integer. Fix netlink_notify to
match all other portid user in the kernel.
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 mm changes from Ingo Molnar:
"The main changes in this cycle were:
- reduce the x86/32 PAE per task PGD allocation overhead from 4K to
0.032k (Fenghua Yu)
- early_ioremap/memunmap() usage cleanups (Juergen Gross)
- gbpages support cleanups (Luis R Rodriguez)
- improve AMD Bulldozer (family 0x15) ASLR I$ aliasing workaround to
increase randomization by 3 bits (per bootup) (Hector
Marco-Gisbert)
- misc fixlets"
* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Improve AMD Bulldozer ASLR workaround
x86/mm/pat: Initialize __cachemode2pte_tbl[] and __pte2cachemode_tbl[] in a bit more readable fashion
init.h: Clean up the __setup()/early_param() macros
x86/mm: Simplify probe_page_size_mask()
x86/mm: Further simplify 1 GB kernel linear mappings handling
x86/mm: Use early_param_on_off() for direct_gbpages
init.h: Add early_param_on_off()
x86/mm: Simplify enabling direct_gbpages
x86/mm: Use IS_ENABLED() for direct_gbpages
x86/mm: Unexport set_memory_ro() and set_memory_rw()
x86/mm, efi: Use early_ioremap() in arch/x86/platform/efi/efi-bgrt.c
x86/mm: Use early_memunmap() instead of early_iounmap()
x86/mm/pat: Ensure different messages in STRICT_DEVMEM and PAT cases
x86/mm: Reduce PAE-mode per task pgd allocation overhead from 4K to 32 bytes
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 asm changes from Ingo Molnar:
"There were lots of changes in this development cycle:
- over 100 separate cleanups, restructuring changes, speedups and
fixes in the x86 system call, irq, trap and other entry code, part
of a heroic effort to deobfuscate a decade old spaghetti asm code
and its C code dependencies (Denys Vlasenko, Andy Lutomirski)
- alternatives code fixes and enhancements (Borislav Petkov)
- simplifications and cleanups to the compat code (Brian Gerst)
- signal handling fixes and new x86 testcases (Andy Lutomirski)
- various other fixes and cleanups
By their nature many of these changes are risky - we tried to test
them well on many different x86 systems (there are no known
regressions), and they are split up finely to help bisection - but
there's still a fair bit of residual risk left so caveat emptor"
* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (148 commits)
perf/x86/64: Report regs_user->ax too in get_regs_user()
perf/x86/64: Simplify regs_user->abi setting code in get_regs_user()
perf/x86/64: Do report user_regs->cx while we are in syscall, in get_regs_user()
perf/x86/64: Do not guess user_regs->cs, ss, sp in get_regs_user()
x86/asm/entry/32: Tidy up JNZ instructions after TESTs
x86/asm/entry/64: Reduce padding in execve stubs
x86/asm/entry/64: Remove GET_THREAD_INFO() in ret_from_fork
x86/asm/entry/64: Simplify jumps in ret_from_fork
x86/asm/entry/64: Remove a redundant jump
x86/asm/entry/64: Optimize [v]fork/clone stubs
x86/asm/entry: Zero EXTRA_REGS for stub32_execve() too
x86/asm/entry/64: Move stub_x32_execvecloser() to stub_execveat()
x86/asm/entry/64: Use common code for rt_sigreturn() epilogue
x86/asm/entry/64: Add forgotten CFI annotation
x86/asm/entry/irq: Simplify interrupt dispatch table (IDT) layout
x86/asm/entry/64: Move opportunistic sysret code to syscall code path
x86, selftests: Add sigreturn selftest
x86/alternatives: Guard NOPs optimization
x86/asm/entry: Clear EXTRA_REGS for all executable formats
x86/signal: Remove pax argument from restore_sigcontext
...
|
|
Support instantiating stateful expressions based on a template that
are associated with dynamically created set entries. The expressions
are evaluated when adding or updating the set element.
This allows to maintain per flow state using the existing set
infrastructure and expression types, with arbitrary definitions of
a flow.
Usage is currently restricted to anonymous sets, meaning only a single
binding can exist, since the desired semantics of multiple independant
bindings haven't been defined so far.
Examples (userspace syntax is still WIP):
1. Limit the rate of new SSH connections per host, similar to iptables
hashlimit:
flow ip saddr timeout 60s \
limit 10/second \
accept
2. Account network traffic between each set of /24 networks:
flow ip saddr & 255.255.255.0 . ip daddr & 255.255.255.0 \
counter
3. Account traffic to each host per user:
flow skuid . ip daddr \
counter
4. Account traffic for each combination of source address and TCP flags:
flow ip saddr . tcp flags \
counter
The resulting set content after a Xmas-scan look like this:
{
192.168.122.1 . fin | psh | urg : counter packets 1001 bytes 40040,
192.168.122.1 . ack : counter packets 74 bytes 3848,
192.168.122.1 . psh | ack : counter packets 35 bytes 3144
}
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Add a set flag to indicate that the set is used as a state table and
contains expressions for evaluation. This operation is mutually
exclusive with the mapping operation, so sets specifying both are
rejected. The lookup expression also rejects binding to state tables
since it only deals with loopup and map operations.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Add a flag to mark stateful expressions.
This is used for dynamic expression instanstiation to limit the usable
expressions. Strictly speaking only the dynset expression can not be
used in order to avoid recursion, but since dynamically instantiating
non-stateful expressions will simply create an identical copy, which
behaves no differently than the original, this limits to expressions
where it actually makes sense to dynamically instantiate them.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Preparation to attach expressions to set elements: add a set extension
type to hold an expression and dump the expression information with the
set element.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Add helper functions for initializing, cloning, dumping and destroying
a single expression that is not part of a rule.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
linux/if.h creates conflicts in userspace with net/if.h
By using it here we force userspace to use linux/if.h while
net/if.h may be needed.
Note that:
include/linux/netfilter_ipv4/ip_tables.h and
include/linux/netfilter_ipv6/ip6_tables.h
don't include linux/if.h and they also refer to IFNAMSIZ, so they are
expecting userspace to include use net/if.h from the client program.
Signed-off-by: Arturo Borrero Gonzalez <arturo.borrero.glez@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Ingo Molnar:
"The main changes in this cycle were:
- clockevents state machine cleanups and enhancements (Viresh Kumar)
- clockevents broadcast notifier horror to state machine conversion
and related cleanups (Thomas Gleixner, Rafael J Wysocki)
- clocksource and timekeeping core updates (John Stultz)
- clocksource driver updates and fixes (Ben Dooks, Dmitry Osipenko,
Hans de Goede, Laurent Pinchart, Maxime Ripard, Xunlei Pang)
- y2038 fixes (Xunlei Pang, John Stultz)
- NMI-safe ktime_get_raw_fast() and general refactoring of the clock
code, in preparation to perf's per event clock ID support (Peter
Zijlstra)
- generic sched/clock fixes, optimizations and cleanups (Daniel
Thompson)
- clockevents cpu_down() race fix (Preeti U Murthy)"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (94 commits)
timers/PM: Drop unnecessary braces from tick_freeze()
timers/PM: Fix up tick_unfreeze()
timekeeping: Get rid of stale comment
clockevents: Cleanup dead cpu explicitely
clockevents: Make tick handover explicit
clockevents: Remove broadcast oneshot control leftovers
sched/idle: Use explicit broadcast oneshot control function
ARM: Tegra: Use explicit broadcast oneshot control function
ARM: OMAP: Use explicit broadcast oneshot control function
intel_idle: Use explicit broadcast oneshot control function
ACPI/idle: Use explicit broadcast control function
ACPI/PAD: Use explicit broadcast oneshot control function
x86/amd/idle, clockevents: Use explicit broadcast oneshot control functions
clockevents: Provide explicit broadcast oneshot control functions
clockevents: Remove the broadcast control leftovers
ARM: OMAP: Use explicit broadcast control function
intel_idle: Use explicit broadcast control function
cpuidle: Use explicit broadcast control function
ACPI/processor: Use explicit broadcast control function
ACPI/PAD: Use explicit broadcast control function
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler changes from Ingo Molnar:
"Major changes:
- Reworked CPU capacity code, for better SMP load balancing on
systems with assymetric CPUs. (Vincent Guittot, Morten Rasmussen)
- Reworked RT task SMP balancing to be push based instead of pull
based, to reduce latencies on large CPU count systems. (Steven
Rostedt)
- SCHED_DEADLINE support updates and fixes. (Juri Lelli)
- SCHED_DEADLINE task migration support during CPU hotplug. (Wanpeng Li)
- x86 mwait-idle optimizations and fixes. (Mike Galbraith, Len Brown)
- sched/numa improvements. (Rik van Riel)
- various cleanups"
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (28 commits)
sched/core: Drop debugging leftover trace_printk call
sched/deadline: Support DL task migration during CPU hotplug
sched/core: Check for available DL bandwidth in cpuset_cpu_inactive()
sched/deadline: Always enqueue on previous rq when dl_task_timer() fires
sched/core: Remove unused argument from init_[rt|dl]_rq()
sched/deadline: Fix rt runtime corruption when dl fails its global constraints
sched/deadline: Avoid a superfluous check
sched: Improve load balancing in the presence of idle CPUs
sched: Optimize freq invariant accounting
sched: Move CFS tasks to CPUs with higher capacity
sched: Add SD_PREFER_SIBLING for SMT level
sched: Remove unused struct sched_group_capacity::capacity_orig
sched: Replace capacity_factor by usage
sched: Calculate CPU's usage statistic and put it into struct sg_lb_stats::group_usage
sched: Add struct rq::cpu_capacity_orig
sched: Make scale_rt invariant with frequency
sched: Make sched entity usage tracking scale-invariant
sched: Remove frequency scaling from cpu_capacity
sched: Track group sched_entity usage contributions
sched: Add sched_avg::utilization_avg_contrib
...
|
|
Even if we make use of classifier and actions from the egress
path, we're going into handle_ing() executing additional code
on a per-packet cost for ingress qdisc, just to realize that
nothing is attached on ingress.
Instead, this can just be blinded out as a no-op entirely with
the use of a static key. On input fast-path, we already make
use of static keys in various places, e.g. skb time stamping,
in RPS, etc. It makes sense to not waste time when we're assured
that no ingress qdisc is attached anywhere.
Enabling/disabling of that code path is being done via two
helpers, namely net_{inc,dec}_ingress_queue(), that are being
invoked under RTNL mutex when a ingress qdisc is being either
initialized or destructed.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core locking changes from Ingo Molnar:
"Main changes:
- jump label asm preparatory work for PowerPC (Anton Blanchard)
- rwsem optimizations and cleanups (Davidlohr Bueso)
- mutex optimizations and cleanups (Jason Low)
- futex fix (Oleg Nesterov)
- remove broken atomicity checks from {READ,WRITE}_ONCE() (Peter
Zijlstra)"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
powerpc, jump_label: Include linux/jump_label.h to get HAVE_JUMP_LABEL define
jump_label: Allow jump labels to be used in assembly
jump_label: Allow asm/jump_label.h to be included in assembly
locking/mutex: Further simplify mutex_spin_on_owner()
locking: Remove atomicy checks from {READ,WRITE}_ONCE
locking/rtmutex: Rename argument in the rt_mutex_adjust_prio_chain() documentation as well
locking/rwsem: Fix lock optimistic spinning when owner is not running
locking: Remove ACCESS_ONCE() usage
locking/rwsem: Check for active lock before bailing on spinning
locking/rwsem: Avoid deceiving lock spinners
locking/rwsem: Set lock ownership ASAP
locking/rwsem: Document barrier need when waking tasks
locking/futex: Check PF_KTHREAD rather than !p->mm to filter out kthreads
locking/mutex: Refactor mutex_spin_on_owner()
locking/mutex: In mutex_spin_on_owner(), return true when owner changes
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI update from Ingo Molnar:
"This tree includes various fixes, cleanups, a new efi=debug boot
option and EFI boot stub memory allocation optimizations"
* 'core-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi/libstub: Retrieve FDT size when loaded from UEFI config table
efi: Clean up the efi_call_phys_[prolog|epilog]() save/restore interaction
efi: Disable interrupts around EFI calls, not in the epilog/prolog calls
x86/efi: Add a "debug" option to the efi= cmdline
firmware: dmi_scan: Use direct access to static vars
firmware: dmi_scan: Use full dmi version for SMBIOS3
|
|
Some trivial reorders while preserving the RX/TX cache lines
split to fill a couple of holes.
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
e1000e is the only driver requiring pm_qos_req, instead of causing
every device to waste up to 240 bytes. Allocate it for the specific
driver.
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull KVM updates from Paolo Bonzini:
"First batch of KVM changes for 4.1
The most interesting bit here is irqfd/ioeventfd support for ARM and
ARM64.
Summary:
ARM/ARM64:
fixes for live migration, irqfd and ioeventfd support (enabling
vhost, too), page aging
s390:
interrupt handling rework, allowing to inject all local interrupts
via new ioctl and to get/set the full local irq state for migration
and introspection. New ioctls to access memory by virtual address,
and to get/set the guest storage keys. SIMD support.
MIPS:
FPU and MIPS SIMD Architecture (MSA) support. Includes some
patches from Ralf Baechle's MIPS tree.
x86:
bugfixes (notably for pvclock, the others are small) and cleanups.
Another small latency improvement for the TSC deadline timer"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (146 commits)
KVM: use slowpath for cross page cached accesses
kvm: mmu: lazy collapse small sptes into large sptes
KVM: x86: Clear CR2 on VCPU reset
KVM: x86: DR0-DR3 are not clear on reset
KVM: x86: BSP in MSR_IA32_APICBASE is writable
KVM: x86: simplify kvm_apic_map
KVM: x86: avoid logical_map when it is invalid
KVM: x86: fix mixed APIC mode broadcast
KVM: x86: use MDA for interrupt matching
kvm/ppc/mpic: drop unused IRQ_testbit
KVM: nVMX: remove unnecessary double caching of MAXPHYADDR
KVM: nVMX: checks for address bits beyond MAXPHYADDR on VM-entry
KVM: x86: cache maxphyaddr CPUID leaf in struct kvm_vcpu
KVM: vmx: pass error code with internal error #2
x86: vdso: fix pvclock races with task migration
KVM: remove kvm_read_hva and kvm_read_hva_atomic
KVM: x86: optimize delivery of TSC deadline timer interrupt
KVM: x86: extract blocking logic from __vcpu_run
kvm: x86: fix x86 eflags fixed bit
KVM: s390: migrate vcpu interrupt state
...
|
|
This patch changes sets to support variable sized set element keys / data
up to 64 bytes each by using variable sized set extensions. This allows
to use concatenations with bigger data items suchs as IPv6 addresses.
As a side effect, small keys/data now don't require the full 16 bytes
of struct nft_data anymore but just the space they need.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Add a size argument to nft_data_init() and pass in the available space.
This will be used by the following patches to support variable sized
set element data.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Switch the nf_tables registers from 128 bit addressing to 32 bit
addressing to support so called concatenations, where multiple values
can be concatenated over multiple registers for O(1) exact matches of
multiple dimensions using sets.
The old register values are mapped to areas of 128 bits for compatibility.
When dumping register numbers, values are expressed using the old values
if they refer to the beginning of a 128 bit area for compatibility.
To support concatenations, register loads of less than a full 32 bit
value need to be padded. This mainly affects the payload and exthdr
expressions, which both unconditionally zero the last word before
copying the data.
Userspace fully passes the testsuite using both old and new register
addressing.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Add helper functions to parse and dump register values in netlink attributes.
These helpers will later be changed to take care of translation between the
old 128 bit and the new 32 bit register numbers.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Simple conversion to use u32 pointers to the beginning of the data
area to keep follow up patches smaller.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Only needlessly complicates things due to requiring specific argument
types. Use memcmp directly.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Replace the array of registers passed to expressions by a struct nft_regs,
containing the verdict as a seperate member, which aliases to the
NFT_REG_VERDICT register.
This is needed to seperate the verdict from the data registers completely,
so their size can be changed.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Change nft_validate_input_register() to not only validate the input
register number, but also the length of the load, and rename it to
nft_validate_register_load() to reflect that change.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
All users of nft_validate_register_store() first invoke
nft_validate_output_register(). There is in fact no use for using it
on its own, so simplify the code by folding the functionality into
nft_validate_register_store() and kill it.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The existing name is ambiguous, data is loaded as well when we read from
a register. Rename to nft_validate_register_store() for clarity and
consistency with the upcoming patch to introduce its counterpart,
nft_validate_register_load().
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
For values spanning multiple registers, we need to validate that enough
space is available from the destination register onwards. Add a len
argument to nft_validate_data_load() and consolidate the existing length
validations in preparation of that.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v4.1
More updates for v4.1, pretty much all drivers:
- Lots of cleanups from Lars, mainly moving things from the CODEC level
to the card level.
- Continuing improvements to rcar from Morimoto-san, pcm512x from
Howard and Peter, the Intel platforms from Vinod, Jie, Jin and Han,
and to rt5670 from Bard.
- Support for some non-DSP Qualcomm platforms, Google's Storm
platform, Maxmim MAX98925 CODECs and the Ingenic JZ4780 SoC.
|
|
Although some races in runtime PM refcount was fixed by the commit
[664c715573c2: ALSA: hda - Work around races of power up/down with
runtime PM], there is still a race in the following case:
CPU0: CPU1 :
runtime suspend:
codec->in_pm = 1
snd_hdac_power_up_pm():
pm_runtime_get_sync() skipped
suspend finished:
codec->in_pm = 0
snd_hdac_power_down_pm():
pm_runtime_put_*() is called!
For avoiding this situation, increment in_pm flag atomically when it's
non-zero, and decrement accordingly, to ensure that in_pm is set
consistently for the whole concurrent operations.
Also, since atomic_inc_not_zero() and atomic_dec_if_positive() are
lengthy inline functions, move snd_hdac_power_up_pm() and _down_pm()
to sound/hda/hdac_device.c as no inline functions.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Now that we are using smpboot_thread_init() in init/main.c as well,
provide it for !CONFIG_SMP as well.
This addresses a !CONFIG_SMP build failure.
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Currently, smpboot_unpark_threads() is invoked before the incoming CPU
has been added to the scheduler's runqueue structures. This might
potentially cause the unparked kthread to run on the wrong CPU, since the
correct CPU isn't fully set up yet.
That causes a sporadic, hard to debug boot crash triggering on some
systems, reported by Borislav Petkov, and bisected down to:
2a442c9c6453 ("x86: Use common outgoing-CPU-notification code")
This patch places smpboot_unpark_threads() in a CPU hotplug
notifier with priority set so that these kthreads are unparked just after
the CPU has been added to the runqueues.
Reported-and-tested-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue
Jeff Kirsher says:
====================
Intel Wired LAN Driver Updates 2015-04-11
This series contains updates to iflink, ixgbe and ixgbevf.
The entire set of changes come from Vlad Zolotarov to ultimately add
the ethtool ops to VF driver to allow querying the RSS indirection table
and RSS random key.
Currently we support only 82599 and x540 devices. On those devices, VFs
share the RSS redirection table and hash key with a PF. Letting the VF
query this information may introduce some security risks, therefore this
feature will be disabled by default.
The new netdev op allows a system administrator to change the default
behaviour with "ip link set" command. The relevant iproute2 patch has
already been sent and awaits for this series upstream.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Cc: Tom Herbert <tom@herbertland.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
Johannes Berg says:
====================
There isn't much left, but we have
* new mac80211 internal software queue to allow drivers to have
shorter hardware queues and pull on-demand
* use rhashtable for mac80211 station table
* minstrel rate control debug improvements and some refactoring
* fix noisy message about TX power reduction
* fix continuous message printing and activity if CRDA doesn't respond
* fix VHT-related capabilities with "iw connect" or "iwconfig ..."
* fix Kconfig for cfg80211 wireless extensions compatibility
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
* pm-sleep:
PM / watchdog: iTCO: stop watchdog during system suspend
PM / sleep: add pm-trace support for suspending phase
PM / sleep: add configurable delay for pm_test
* pm-domains:
PM / domains: avoid potential oops in pm_genpd_remove_device()
PM / domains: factor out code to get the generic PM domain from a struct device
PM / domains: quieten down generic pm domains
PM / Domains: Sync runtime PM status with genpd after probe
driver core / PM: Add PM domain callbacks for device setup/cleanup
MAINTAINERS: add entry for Generic PM domains (genpd)
|
|
* pm-cpufreq:
intel_pstate: Knights Landing support
intel_pstate: remove MSR test
cpufreq: fix qoriq uniprocessor build
cpufreq: hisilicon: add acpu driver
cpufreq: powernv: Report cpu frequency throttling
cpufreq: qoriq: rename the driver
cpufreq: qoriq: Make the driver usable on all QorIQ platforms
* pm-cpuidle:
intel_idle: mark cpu id array as __initconst
intel_idle: Add support for the Airmont Core in the Cherrytrail and Braswell SOCs
intel_idle: Update support for Silvermont Core in Baytrail SOC
ARM: cpuidle: Document the code
ARM: cpuidle: Register per cpuidle device
ARM: cpuidle: Enable the ARM64 driver for both ARM32/ARM64
ARM64: cpuidle: Remove arm64 reference
ARM64: cpuidle: Rename cpu_init_idle to a common function name
ARM64: cpuidle: Replace cpu_suspend by the common ARM/ARM64 function
ARM: cpuidle: Add a cpuidle ops structure to be used for DT
ARM: cpuidle: Remove duplicate header inclusion
|
|
* pnp:
PNP: Avoid leaving unregistered device objects in lists
PNP: Convert pnp_lock into a mutex
PNP: tty/serial/8250/8250_fintek: Use module_pnp_driver to register driver
PNP: platform/x86/apple-gmux: Use module_pnp_driver to register driver
PNP: net/sb1000: Use module_pnp_driver to register driver
PNP: media/rc: Use module_pnp_driver to register driver
PNP: ide/ide-pnp: Use module_pnp_driver to register driver
PNP: ata/pata_isapnp: Use module_pnp_driver to register driver
PNP: tpm/tpm_infineon: Use module_pnp_driver to register driver
PNP: Add helper macro for pnp_register_driver boilerplate
PNP / ACPI: Use ACPI_COMPANION_SET() during initialization
|
|
* device-properties:
device property: Introduce firmware node type for platform data
device property: Make it possible to use secondary firmware nodes
driver core: Implement device property accessors through fwnode ones
driver core: property: Update fwnode_property_read_string_array()
driver core: Add comments about returning array counts
ACPI: Introduce has_acpi_companion()
driver core / ACPI: Represent ACPI companions using fwnode_handle
|
|
* acpi-pm:
ACPI / PM: Enable all wakeup GPEs in suspend-to-idle
ACPI / sleep: Drop acpi_suspend() which is not used
* acpi-enumeration:
ACPI: Add acpi_device_uid() for convenience
ACPI: Update GPIO documentation to mention _DSD
* acpi-sysfs:
ACPI / sysfs: Treat the count field of counter_show() as unsigned
|
|
It is gone from all archs, now we can remove
the final bits.
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
'asoc/topic/wm8731', 'asoc/topic/wm8804' and 'asoc/topic/wm8996' into asoc-next
|
|
'asoc/topic/sh-cleanup' into asoc-next
|
|
'asoc/topic/max98090', 'asoc/topic/max98925' and 'asoc/topic/nuc900' into asoc-next
|
|
|
|
|
|
|
