summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2007-02-12[PATCH] mark struct file_operations const 1Arjan van de Ven
Many struct file_operations in the kernel can be "const". Marking them const moves these to the .rodata section, which avoids false sharing with potential dirty data. In addition it'll catch accidental writes at compile time to these shared resources. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12[PATCH] ps3: cleanup ps3fb before clearing HPTEGeert Uytterhoeven
PS3: Cleanup the frame buffer device before clearing the HPTE mapping Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: James Simmons <jsimmons@infradead.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12[PATCH] ps3: disable display flipping during mode changesGeert Uytterhoeven
If ps3fb is available, we have to disable display flipping while changing the audio or video mode. Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: James Simmons <jsimmons@infradead.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12[PATCH] ps3: Virtual Frame Buffer DriverGeert Uytterhoeven
Add the PS3 Virtual Frame Buffer Driver. As the actual graphics hardware cannot be accessed directly by Linux, ps3fb uses a virtual frame buffer in main memory. The actual screen image is copied to graphics memory by the GPU on every vertical blank, by making a hypervisor call. Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: James Simmons <jsimmons@infradead.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12[PATCH] ps3: Preallocate bootmem memory for ps3fbGeert Uytterhoeven
Preallocate bootmem memory for the PS3 frame buffer device, which needs a large block of physically-contiguous memory. The size of this memory block is configurable: - The config option CONFIG_FB_PS3_DEFAULT_SIZE_M allows to specify the default amount of memory (in MiB) allocated to the virtual frame buffer. - The early boot parameter `ps3fb=xxx' allows to override the default value. It will be rounded up to a multiple of 1 MiB, if needed. Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Cc: James Simmons <jsimmons@infradead.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12[PATCH] fbdev modedb: make more pointer parameters constGeert Uytterhoeven
fbdev modedb: make more input and output pointer parameters const Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: James Simmons <jsimmons@infradead.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12[PATCH] ps3: AV Settings DriverGeert Uytterhoeven
Add the PS3 AV Settings Driver. The AV Settings driver is used to control Audio and Video settings. It communicates with the policy manager through the virtual uart. Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: James Simmons <jsimmons@infradead.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12[PATCH] Video: fb, add true ref_count atomicityJiri Slaby
Some of fb drivers uses atomic_t in bad manner, since there are still some race-prone gaps. Use mutexes to protect open/close code sections with ref_count testing and finally use simple uint. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Acked-by: Denis Oliver Kropp <dok@directfb.org> Cc: James Simmons <jsimmons@infradead.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12[PATCH] remove the broken FB_S3TRIO driverAdrian Bunk
The FB_S3TRIO driver: - has been marked as BROKEN for more than two years and - is still marked as BROKEN. Drivers that had been marked as BROKEN for such a long time seem to be unlikely to be revived in the forseeable future. But if anyone wants to ever revive this driver, the code is still present in the older kernel releases. Signed-off-by: Adrian Bunk <bunk@stusta.de> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: James Simmons <jsimmons@infradead.org> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12[PATCH] proper prototype for tosh_smm()Adrian Bunk
Add a proper prototype for tosh_smm() to include/linux/toshiba.h Signed-off-by: Adrian Bunk <bunk@stusta.de> Cc: James Simmons <jsimmons@infradead.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12[PATCH] fbdev driver for S3 Trio/VirgeOndrej Zajicek
Add a driver for S3 Trio / S3 Virge. Driver is tested with most versions of S3 Trio and with S3 Virge/DX, on i386. (akpm: We kind-of have support for this hardware already, but... virgefb.c - amiga/zorro specific, - broken (according to Kconfig), - uses obsolete/nonexistent interface (struct display_switch) - recent Adrian Bunk's patch removes this driver S3triofb.c - ppc/openfirmware specific - minimal functionality - broken (according to Kconfig), - uses obsolete/nonexistent interface (struct display_switch) ) Signed-off-by: Ondrej Zajicek <santiago@crfreenet.org> Cc: James Simmons <jsimmons@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12[PATCH] hotplug: Allow modules to use the cpu hotplug notifiers even if ↵Avi Kivity
!CONFIG_HOTPLUG_CPU The following patchset allows a host with running virtual machines to be suspended and, on at least a subset of the machines tested, resumed. Note that this is orthogonal to suspending and resuming an individual guest to a file. A side effect of implementing suspend/resume is that cpu hotplug is now supported. This should please the owners of big iron. This patch: KVM wants the cpu hotplug notifications, both for cpu hotplug itself, but more commonly for host suspend/resume. In order to avoid extensive #ifdefs, provide stubs when CONFIG_CPU_HOTPLUG is not defined. In all, we have four cases: - UP: register and unregister stubbed out - SMP+hotplug: full register and unregister - SMP, no hotplug, core: register as __init, unregister stubbed (cpus are brought up during core initialization) - SMP, no hotplug, module: register and unregister stubbed out (cpus cannot be brought up during module lifetime) Signed-off-by: Avi Kivity <avi@qumranet.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12[PATCH] kvm: Fix mismatch between 32-bit and 64-bit abiAvi Kivity
Unfortunately requiring a version bump. Signed-off-by: Avi Kivity <avi@qumranet.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12[PATCH] kvm: Two-way apic tpr synchronizationDor Laor
We report the value of cr8 to userspace on an exit. Also let userspace change cr8 when we re-enter the guest. The lets 64-bit guest code maintain the tpr correctly. Thanks for Yaniv Kamay for the idea. Signed-off-by: Dor Laor <dor.laor@qumranet.com> Signed-off-by: Avi Kivity <avi@qumranet.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12[PATCH] ufs2 write: block allocation updateEvgeniy Dushistov
Patch adds ability to work with 64bit metadata, this made by replacing work with 32bit pointers by inline functions. Signed-off-by: Evgeniy Dushistov <dushistov@mail.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12[PATCH] ufs2 write: inodes writeEvgeniy Dushistov
This patch adds into write inode path function to write UFS2 inode, and modifys allocate inode path to allocate and init additional inode chunks. Also some cleanups: - remove not used parameters in some functions - remove i_gen field from ufs_inode_info structure, there is i_generation in inode structure with same purposes. Signed-off-by: Evgeniy Dushistov <dushistov@mail.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12[PATCH] ia64: 2048-byte command lineAlon Bar-Lev
Current implementation allows the kernel to receive up to 255 characters from the bootloader. While the boot protocol allows greater buffers to be sent. In current environment, the command-line is used in order to specify many values, including suspend/resume, module arguments, splash, initramfs and more. 255 characters are not enough anymore. After edd issue was fixed, and dynammic kernel command-line patch was accepted, we can extend the COMMAND_LINE_SIZE without runtime memory requirements. Signed-off-by: Alon Bar-Lev <alon.barlev@gmail.com> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12[PATCH] x86_64: 2048-byte command lineAlon Bar-Lev
Current implementation allows the kernel to receive up to 255 characters from the bootloader. While the boot protocol allows greater buffers to be sent. In current environment, the command-line is used in order to specify many values, including suspend/resume, module arguments, splash, initramfs and more. 255 characters are not enough anymore. After edd issue was fixed, and dynammic kernel command-line patch was accepted, we can extend the COMMAND_LINE_SIZE without runtime memory requirements. Signed-off-by: Alon Bar-Lev <alon.barlev@gmail.com> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12[PATCH] i386: 2048-byte command lineAlon Bar-Lev
Current implementation allows the kernel to receive up to 255 characters from the bootloader. While the boot protocol allows greater buffers to be sent. In current environment, the command-line is used in order to specify many values, including suspend/resume, module arguments, splash, initramfs and more. 255 characters are not enough anymore. After edd issue was fixed, and dynammic kernel command-line patch was accepted, we can extend the COMMAND_LINE_SIZE without runtime memory requirements. Signed-off-by: Alon Bar-Lev <alon.barlev@gmail.com> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12[PATCH] Dynamic kernel command-line: x86_64Alon Bar-Lev
1. Rename saved_command_line into boot_command_line. 2. Set command_line as __initdata. Signed-off-by: Alon Bar-Lev <alon.barlev@gmail.com> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12[PATCH] Dynamic kernel command-line: commonAlon Bar-Lev
Current implementation stores a static command-line buffer allocated to COMMAND_LINE_SIZE size. Most architectures stores two copies of this buffer, one for future reference and one for parameter parsing. Current kernel command-line size for most architecture is much too small for module parameters, video settings, initramfs paramters and much more. The problem is that setting COMMAND_LINE_SIZE to a grater value, allocates static buffers. In order to allow a greater command-line size, these buffers should be dynamically allocated or marked as init disposable buffers, so unused memory can be released. This patch renames the static saved_command_line variable into boot_command_line adding __initdata attribute, so that it can be disposed after initialization. This rename is required so applications that use saved_command_line will not be affected by this change. It reintroduces saved_command_line as dynamically allocated buffer to match the data in boot_command_line. It also mark secondary command-line buffer as __initdata, and copies it to dynamically allocated static_command_line buffer components may hold reference to it after initialization. This patch is for linux-2.6.20-rc4-mm1 and is divided to target each architecture. I could not check this in any architecture so please forgive me if I got it wrong. The per-architecture modification is very simple, use boot_command_line in place of saved_command_line. The common code is the change into dynamic command-line. This patch: 1. Rename saved_command_line into boot_command_line, mark as init disposable. 2. Add dynamic allocated saved_command_line. 3. Add dynamic allocated static_command_line. 4. During startup copy: boot_command_line into saved_command_line. arch command_line into static_command_line. 5. Parse static_command_line and not arch command_line, so arch command_line may be freed. Signed-off-by: Alon Bar-Lev <alon.barlev@gmail.com> Cc: Andi Kleen <ak@muc.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Ian Molton <spyro@f2s.com> Cc: Mikael Starvik <starvik@axis.com> Cc: David Howells <dhowells@redhat.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Kazumoto Kojima <kkojima@rr.iij4u.or.jp> Cc: Richard Curnow <rc@rc0.org.uk> Cc: William Lee Irwin III <wli@holomorphy.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Cc: Miles Bader <uclinux-v850@lsi.nec.co.jp> Cc: Chris Zankel <chris@zankel.net> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12[PATCH] eCryptfs: Public key transport mechanismMichael Halcrow
This is the transport code for public key functionality in eCryptfs. It manages encryption/decryption request queues with a transport mechanism. Currently, netlink is the only implemented transport. Each inode has a unique File Encryption Key (FEK). Under passphrase, a File Encryption Key Encryption Key (FEKEK) is generated from a salt/passphrase combo on mount. This FEKEK encrypts each FEK and writes it into the header of each file using the packet format specified in RFC 2440. This is all symmetric key encryption, so it can all be done via the kernel crypto API. These new patches introduce public key encryption of the FEK. There is no asymmetric key encryption support in the kernel crypto API, so eCryptfs pushes the FEK encryption and decryption out to a userspace daemon. After considering our requirements and determining the complexity of using various transport mechanisms, we settled on netlink for this communication. eCryptfs stores authentication tokens into the kernel keyring. These tokens correlate with individual keys. For passphrase mode of operation, the authentication token contains the symmetric FEKEK. For public key, the authentication token contains a PKI type and an opaque data blob managed by individual PKI modules in userspace. Each user who opens a file under an eCryptfs partition mounted in public key mode must be running a daemon. That daemon has the user's credentials and has access to all of the keys to which the user should have access. The daemon, when started, initializes the pluggable PKI modules available on the system and registers itself with the eCryptfs kernel module. Userspace utilities register public key authentication tokens into the user session keyring. These authentication tokens correlate key signatures with PKI modules and PKI blobs. The PKI blobs contain PKI-specific information necessary for the PKI module to carry out asymmetric key encryption and decryption. When the eCryptfs module parses the header of an existing file and finds a Tag 1 (Public Key) packet (see RFC 2440), it reads in the public key identifier (signature). The asymmetrically encrypted FEK is in the Tag 1 packet; eCryptfs puts together a decrypt request packet containing the signature and the encrypted FEK, then it passes it to the daemon registered for the current->euid via a netlink unicast to the PID of the daemon, which was registered at the time the daemon was started by the user. The daemon actually just makes calls to libecryptfs, which implements request packet parsing and manages PKI modules. libecryptfs grabs the public key authentication token for the given signature from the user session keyring. This auth tok tells libecryptfs which PKI module should receive the request. libecryptfs then makes a decrypt() call to the PKI module, and it passes along the PKI block from the auth tok. The PKI uses the blob to figure out how it should decrypt the data passed to it; it performs the decryption and passes the decrypted data back to libecryptfs. libecryptfs then puts together a reply packet with the decrypted FEK and passes that back to the eCryptfs module. The eCryptfs module manages these request callouts to userspace code via message context structs. The module maintains an array of message context structs and places the elements of the array on two lists: a free and an allocated list. When eCryptfs wants to make a request, it moves a msg ctx from the free list to the allocated list, sets its state to pending, and fires off the message to the user's registered daemon. When eCryptfs receives a netlink message (via the callback), it correlates the msg ctx struct in the alloc list with the data in the message itself. The msg->index contains the offset of the array of msg ctx structs. It verifies that the registered daemon PID is the same as the PID of the process that sent the message. It also validates a sequence number between the received packet and the msg ctx. Then, it copies the contents of the message (the reply packet) into the msg ctx struct, sets the state in the msg ctx to done, and wakes up the process that was sleeping while waiting for the reply. The sleeping process was whatever was performing the sys_open(). This process originally called ecryptfs_send_message(); it is now in ecryptfs_wait_for_response(). When it wakes up and sees that the msg ctx state was set to done, it returns a pointer to the message contents (the reply packet) and returns. If all went well, this packet contains the decrypted FEK, which is then copied into the crypt_stat struct, and life continues as normal. The case for creation of a new file is very similar, only instead of a decrypt request, eCryptfs sends out an encrypt request. > - We have a great clod of key mangement code in-kernel. Why is that > not suitable (or growable) for public key management? eCryptfs uses Howells' keyring to store persistent key data and PKI state information. It defers public key cryptographic transformations to userspace code. The userspace data manipulation request really is orthogonal to key management in and of itself. What eCryptfs basically needs is a secure way to communicate with a particular daemon for a particular task doing a syscall, based on the UID. Nothing running under another UID should be able to access that channel of communication. > - Is it appropriate that new infrastructure for public key > management be private to a particular fs? The messaging.c file contains a lot of code that, perhaps, could be extracted into a separate kernel service. In essence, this would be a sort of request/reply mechanism that would involve a userspace daemon. I am not aware of anything that does quite what eCryptfs does, so I was not aware of any existing tools to do just what we wanted. > What happens if one of these daemons exits without sending a quit > message? There is a stale uid<->pid association in the hash table for that user. When the user registers a new daemon, eCryptfs cleans up the old association and generates a new one. See ecryptfs_process_helo(). > - _why_ does it use netlink? Netlink provides the transport mechanism that would minimize the complexity of the implementation, given that we can have multiple daemons (one per user). I explored the possibility of using relayfs, but that would involve having to introduce control channels and a protocol for creating and tearing down channels for the daemons. We do not have to worry about any of that with netlink. Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com> Cc: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12[PATCH] include/linux/nfsd/const.h: remove NFS_SUPER_MAGICAdrian Bunk
NFS_SUPER_MAGIC is already defined in include/linux/magic.h Signed-off-by: Adrian Bunk <bunk@stusta.de> Cc: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12[PATCH] knfsd: SUNRPC: support IPv6 addresses in RPC server's UDP receive pathChuck Lever
Add support for IPv6 addresses in the RPC server's UDP receive path. [akpm@linux-foundation.org: cleanups] Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12[PATCH] knfsd: SUNRPC: Make rq_daddr field address-version independentChuck Lever
The rq_daddr field must support larger addresses. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12[PATCH] knfsd: SUNRPC: Provide room in svc_rqst for larger addressesChuck Lever
Expand the rq_addr field to allow it to contain larger addresses. Specifically, we replace a 'sockaddr_in' with a 'sockaddr_storage', then everywhere the 'sockaddr_in' was referenced, we use instead an accessor function (svc_addr_in) which safely casts the _storage to _in. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12[PATCH] knfsd: SUNRPC: Use sockaddr_storage to store address in svc_deferred_reqChuck Lever
Sockaddr_storage will allow us to store arbitrary socket addresses in the svc_deferred_req struct. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12[PATCH] knfsd: SUNRPC: Add a function to format the address in an svc_rqst ↵Chuck Lever
for printing There are loads of places where the RPC server assumes that the rq_addr fields contains an IPv4 address. Top among these are error and debugging messages that display the server's IP address. Let's refactor the address printing into a separate function that's smart enough to figure out the difference between IPv4 and IPv6 addresses. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12[PATCH] knfsd: SUNRPC: Cache remote peer's address in svc_sockChuck Lever
The remote peer's address won't change after the socket has been accepted. We don't need to call ->getname on every incoming request. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12[PATCH] knfsd: SUNRPC: allow creating an RPC service without registering ↵Chuck Lever
with portmapper Sometimes we need to create an RPC service but not register it with the local portmapper. NFSv4 delegation callback, for example. Change the svc_makesock() API to allow optionally creating temporary or permanent sockets, optionally registering with the local portmapper, and make it return the ephemeral port of the new socket. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12[PATCH] knfsd: SUNRPC: update internal API: separate pmap register and temp ↵Chuck Lever
sockets Currently in the RPC server, registering with the local portmapper and creating "permanent" sockets are tied together. Expand the internal APIs to allow these two socket characteristics to be separately specified. This will be externalized in the next patch. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12[PATCH] S3C2410 GPIO wrappersPhilipp Zabel
Arch-neutral GPIO calls for S3C24xx. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12[PATCH] SA1100 GPIO wrappersPhilipp Zabel
Arch-neutral GPIO calls for SA-1100. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12[PATCH] PXA GPIO wrappersPhilipp Zabel
Arch-neutral GPIO calls for PXA. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12[PATCH] AT91 GPIO wrappersDavid Brownell
This is a first cut at making the AT91 code use the generic GPIO calls. Note that the original AT91 GPIO calls merged the "mux pin as GPIO" and "set GPIO direction" functionality into one API call, contrary to what's specified as a cross-platform portable model. So this involved a few non-inlinable functions. [akpm@osdl.org: cleanups] Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12[PATCH] OMAP GPIO wrappersDavid Brownell
This teaches OMAP how to implement the cross-platform GPIO interfaces. [akpm@osdl.org: cleanups] Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12[PATCH] GPIO coreDavid Brownell
This defines a simple and minimalist programming interface for GPIO APIs: - Documentation/gpio.txt ... describes things (read it) - include/asm-arm/gpio.h ... defines the ARM hook, which just punts to <asm/arch/gpio.h> for any implementation - include/asm-generic/gpio.h ... implement "can sleep" variants as calling the normal ones, for systems that don't handle i2c expanders. The immediate need for such a cross-architecture API convention is to support drivers that work the same on AT91 ARM and AVR32 AP7000 chips, which embed many of the same controllers but have different CPUs. However, several other users have been reported, including a driver for a hardware watchdog chip and some handhelds.org multi-CPU button drivers. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12[PATCH] pid: remove the now unused kill_pg kill_pg_info and __kill_pg_infoEric W. Biederman
Now that I have changed all of the in-tree users remove the old version of these functions. This should make it clear to any out of tree users that they should be using kill_pgrp kill_pgrp_info or __kill_pgrp_info instead. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12[PATCH] pid: remove now unused do_each_task_pid and while_each_task_pidEric W. Biederman
Now that I have changed all of the users remove the old version of these functions. This should be a clear hint to any out of tree users that they should use do_each_pid_task and while_each_pid_task for new code. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12[PATCH] tty: update the tty layer to work with struct pidEric W. Biederman
Of kernel subsystems that work with pids the tty layer is probably the largest consumer. But it has the nice virtue that the assiation with a session only lasts until the session leader exits. Which means that no reference counting is required. So using struct pid winds up being a simple optimization to avoid hash table lookups. In the long term the use of pid_nr also ensures that when we have multiple pid spaces mixed everything will work correctly. Signed-off-by: Eric W. Biederman <eric@maxwell.lnxi.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12[PATCH] pid: replace is_orphaned_pgrp with is_current_pgrp_orphanedEric W. Biederman
Every call to is_orphaned_pgrp passed in process_group(current) which is racy with respect to another thread changing our process group. It didn't bite us because we were dealing with integers and the worse we would get would be a stale answer. In switching the checks to use struct pid to be a little more efficient and prepare the way for pid namespaces this race became apparent. So I simplified the calls to the more specialized is_current_pgrp_orphaned so I didn't have to worry about making logic changes to avoid the race. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12[PATCH] pid: make session_of_pgrp use struct pid instead of pid_tEric W. Biederman
To properly implement a pid namespace I need to deal exclusively in terms of struct pid, because pid_t values become ambiguous. To this end session_of_pgrp is transformed to take and return a struct pid pointer. To avoid the need to worry about reference counting I now require my caller to hold the appropriate locks. Leaving callers repsonsible for increasing the reference count if they need access to the result outside of the locks. Since session_of_pgrp currently only has one caller and that caller simply uses only test the result for equality with another process group, the locking change means I don't actually have to acquire the tasklist_lock at all. tiocspgrp is also modified to take and release the lock. The logic there is a little more complicated but nothing I won't need when I convert pgrp of a tty to a struct pid pointer. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12[PATCH] tty: make __proc_set_tty staticEric W. Biederman
The aim of this patch set is to start wrapping up the struct pid conversions. As such this patchset culminates with the removal of kill_pg, kill_pg_info, __kill_pg_info, do_each_task_pid, and while_each_task_pid. kill_proc, daemonize, and kernel_thread are still in my sights but there is still work to get to them. The first three are basic cleanups around disassociate_ctty, while working on converting it I found several issues. tty_old_pgrp can be a tricky concept to wrap your head around. 1 tty: Make __proc_set_tty static. 2 tty: Clarify disassociate_ctty 3 tty: Fix the locking for signal->session in disassociate_ctty These just stop using the old helper functions. 4 signal: Use kill_pgrp not kill_pg in the sunos compatibility code. 5 signal: Rewrite kill_something_info so it uses newer helpers. Then the grind to convert the tty layer and all of it's helper functions to struct pid. 6 pid: Make session_of_pgrp use struct pid instead of pid_t. 7 pid: Use struct pid for talking about process groups in exit.c 8 pid: Replace is_orphaned_pgrp with is_current_pgrp_orphaned 9 tty: Update the tty layer to work with struct pid. A final helper function update. 10 pid: Replace do/while_each_task_pid with do/while_each_pid_task And the removal of the functions that are now unused. 11 pid: Remove now unused do_each_task_pid and while_each_task_pid 12 pid: Remove the now unused kill_pg kill_pg_info and __kill_pg_info All of these should be fairly simple and to the point. This patch: Currently all users of __proc_set_tty are in tty_io.c so make the function static. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12[PATCH] Minix V3 supportAndries Brouwer
This morning I needed to read a Minix V3 filesystem, but unfortunately my 2.6.19 did not support that, and neither did the downloaded 2.6.20rc4. Fortunately, google told me that Daniel Aragones had already done the work, patch found at http://www.terra.es/personal2/danarag/ Unfortunaly, looking at the patch was painful to my eyes, so I polished it a bit before applying. The resulting kernel boots, and reads the filesystem it needed to read. Signed-off-by: Daniel Aragones <danarag@gmail.com> Signed-off-by: Andries Brouwer <aeb@cwi.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12[PATCH] SPI eeprom driverDavid Brownell
This is adds a simple SPI EEPROM driver, providing access to the EEPROM through sysfs much like the I2C "eeprom" driver ... except this driver supports write access, and multiple EEPROM sizes. From: "Tuppa, Walter" <walter.tuppa@siemens.com> Since I have EEPROMs on SPI with different address sizing, I made some changes to your at25.c to support them. Works perfectly. (Also includes a small bugfix for the "what size address" test.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Walter Tuppa <walter.tuppa@siemens.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12[PATCH] SPI doc clarificationsDavid Brownell
This clarifies some aspects of the SPI programming interface, based on feedback from Hans-Peter Nilsson. The in-memory representation of words is right-aligned, so for example a twelve bit word is stored using sixteen bits with four undefined bits in the MSB. And controller drivers must reject protocol tweaking modes they do not support. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12[PATCH] SPI cleanup() method param becomes non-constHans-Peter Nilsson
I'd like to assign NULL to kfree()d members of a structure. I can't do that without ugly casting (see the PXA patch) when the structure pointed to is const-qualified. I don't really see a reason why the cleanup method isn't allowed to alter the object it should clean up. :-) No, I didn't test the PXA patch, but I verified that the NULL-assignment doesn't stop me from doing rmmod/insmodding my own spi_bitbang-based driver. Signed-off-by: Hans-Peter Nilsson <hp@axis.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12[PATCH] spi: remove return in spi_unregister_driver()Ben Dooks
Make the spi_unregister_driver() code fit in with the rest of the header file, and only do the action if the driver passed is non-NULL. This also makes the code a line smaller. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12[PATCH] spi: add spi_set_drvdata() and spi_get_drvdata()Ben Dooks
Add wrappers for getting and setting the driver data using spi_device instead of using dev_{get|set}_drvdata with &spi->dev, to mirror the platform_{get|set}_drvdata. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12[PATCH] SPI: Freescale iMX SPI controller driver (BIS+)Andrea Paterniani
Add the SPI controller driver for Freescale i.MX(S/L/1). Main features summary: > Per chip setup via board specific code and/or protocol driver. > Per transfer setup. > PIO transfers. > DMA transfers. > Managing of NULL tx / rx buffer for rd only / wr only transfers. This patch replace patch-2.6.20-rc4-spi_imx with the following changes: > Few cosmetic changes. > Function map_dma_buffers now return 0 for success and -1 for failure. > Solved a bug inside spi_imx_probe function (wrong error path). > Solved a bug inside setup function (bad undo setup for max_speed_hz). > For read-only transfers, always write zero bytes. This is almost the same as the 'BIS' version sent by Andrea, except for updating the 'DUMMY' byte so that read-only transfers shift out zeroes. That part of the API changed recently, since some half duplex peripheral chips require that semantic. Signed-off-by: Andrea Paterniani <a.paterniani@swapp-eng.it> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>