summaryrefslogtreecommitdiff
path: root/kernel/audit.c
AgeCommit message (Collapse)Author
2014-06-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: 1) Seccomp BPF filters can now be JIT'd, from Alexei Starovoitov. 2) Multiqueue support in xen-netback and xen-netfront, from Andrew J Benniston. 3) Allow tweaking of aggregation settings in cdc_ncm driver, from Bjørn Mork. 4) BPF now has a "random" opcode, from Chema Gonzalez. 5) Add more BPF documentation and improve test framework, from Daniel Borkmann. 6) Support TCP fastopen over ipv6, from Daniel Lee. 7) Add software TSO helper functions and use them to support software TSO in mvneta and mv643xx_eth drivers. From Ezequiel Garcia. 8) Support software TSO in fec driver too, from Nimrod Andy. 9) Add Broadcom SYSTEMPORT driver, from Florian Fainelli. 10) Handle broadcasts more gracefully over macvlan when there are large numbers of interfaces configured, from Herbert Xu. 11) Allow more control over fwmark used for non-socket based responses, from Lorenzo Colitti. 12) Do TCP congestion window limiting based upon measurements, from Neal Cardwell. 13) Support busy polling in SCTP, from Neal Horman. 14) Allow RSS key to be configured via ethtool, from Venkata Duvvuru. 15) Bridge promisc mode handling improvements from Vlad Yasevich. 16) Don't use inetpeer entries to implement ID generation any more, it performs poorly, from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1522 commits) rtnetlink: fix userspace API breakage for iproute2 < v3.9.0 tcp: fixing TLP's FIN recovery net: fec: Add software TSO support net: fec: Add Scatter/gather support net: fec: Increase buffer descriptor entry number net: fec: Factorize feature setting net: fec: Enable IP header hardware checksum net: fec: Factorize the .xmit transmit function bridge: fix compile error when compiling without IPv6 support bridge: fix smatch warning / potential null pointer dereference via-rhine: fix full-duplex with autoneg disable bnx2x: Enlarge the dorq threshold for VFs bnx2x: Check for UNDI in uncommon branch bnx2x: Fix 1G-baseT link bnx2x: Fix link for KR with swapped polarity lane sctp: Fix sk_ack_backlog wrap-around problem net/core: Add VF link state control policy net/fsl: xgmac_mdio is dependent on OF_MDIO net/fsl: Make xgmac_mdio read error message useful net_sched: drr: warn when qdisc is not work conserving ...
2014-06-06ipc, kernel: use Linux headersPaul McQuade
Use #include <linux/uaccess.h> instead of <asm/uaccess.h> Use #include <linux/types.h> instead of <asm/types.h> Signed-off-by: Paul McQuade <paulmcquad@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-05-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/ethernet/altera/altera_sgdma.c net/netlink/af_netlink.c net/sched/cls_api.c net/sched/sch_api.c The netlink conflict dealt with moving to netlink_capable() and netlink_ns_capable() in the 'net' tree vs. supporting 'tc' operations in non-init namespaces. These were simple transformations from netlink_capable to netlink_ns_capable. The Altera driver conflict was simply code removal overlapping some void pointer cast cleanups in net-next. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-24net: Use netlink_ns_capable to verify the permisions of netlink messagesEric W. Biederman
It is possible by passing a netlink socket to a more privileged executable and then to fool that executable into writing to the socket data that happens to be valid netlink message to do something that privileged executable did not intend to do. To keep this from happening replace bare capable and ns_capable calls with netlink_capable, netlink_net_calls and netlink_ns_capable calls. Which act the same as the previous calls except they verify that the opener of the socket had the desired permissions as well. Reported-by: Andy Lutomirski <luto@amacapital.net> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-23audit: send multicast messages only if there are listenersRichard Guy Briggs
Test first to see if there are any userspace multicast listeners bound to the socket before starting the multicast send work. Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-23audit: add netlink multicast group for log readRichard Guy Briggs
Add a netlink multicast socket with one group to kaudit for "best-effort" delivery to read-only userspace clients such as systemd, in addition to the existing bidirectional unicast auditd userspace client. Currently, auditd is intended to use the CAP_AUDIT_CONTROL and CAP_AUDIT_WRITE capabilities, but actually uses CAP_NET_ADMIN. The CAP_AUDIT_READ capability is added for use by read-only AUDIT_NLGRP_READLOG netlink multicast group clients to the kaudit subsystem. This will safely give access to services such as systemd to consume audit logs while ensuring write access remains restricted for integrity. Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-23audit: add netlink audit protocol bind to check capabilities on multicast joinRichard Guy Briggs
Register a netlink per-protocol bind fuction for audit to check userspace process capabilities before allowing a multicast group connection. Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-12Merge git://git.infradead.org/users/eparis/auditLinus Torvalds
Pull audit updates from Eric Paris. * git://git.infradead.org/users/eparis/audit: (28 commits) AUDIT: make audit_is_compat depend on CONFIG_AUDIT_COMPAT_GENERIC audit: renumber AUDIT_FEATURE_CHANGE into the 1300 range audit: do not cast audit_rule_data pointers pointlesly AUDIT: Allow login in non-init namespaces audit: define audit_is_compat in kernel internal header kernel: Use RCU_INIT_POINTER(x, NULL) in audit.c sched: declare pid_alive as inline audit: use uapi/linux/audit.h for AUDIT_ARCH declarations syscall_get_arch: remove useless function arguments audit: remove stray newline from audit_log_execve_info() audit_panic() call audit: remove stray newlines from audit_log_lost messages audit: include subject in login records audit: remove superfluous new- prefix in AUDIT_LOGIN messages audit: allow user processes to log from another PID namespace audit: anchor all pid references in the initial pid namespace audit: convert PPIDs to the inital PID namespace. pid: get pid_t ppid of task in init_pid_ns audit: rename the misleading audit_get_context() to audit_take_context() audit: Add generic compat syscall support audit: Add CONFIG_HAVE_ARCH_AUDITSYSCALL ...
2014-03-31AUDIT: Allow login in non-init namespacesEric Paris
It its possible to configure your PAM stack to refuse login if audit messages (about the login) were unable to be sent. This is common in many distros and thus normal configuration of many containers. The PAM modules determine if audit is enabled/disabled in the kernel based on the return value from sending an audit message on the netlink socket. If userspace gets back ECONNREFUSED it believes audit is disabled in the kernel. If it gets any other error else it refuses to let the login proceed. Just about ever since the introduction of namespaces the kernel audit subsystem has returned EPERM if the task sending a message was not in the init user or pid namespace. So many forms of containers have never worked if audit was enabled in the kernel. BUT if the container was not in net_init then the kernel network code would send ECONNREFUSED (instead of the audit code sending EPERM). Thus by pure accident/dumb luck/bug if an admin configured the PAM stack to reject all logins that didn't talk to audit, but then ran the login untility in the non-init_net namespace, it would work!! Clearly this was a bug, but it is a bug some people expected. With the introduction of network namespace support in 3.14-rc1 the two bugs stopped cancelling each other out. Now, containers in the non-init_net namespace refused to let users log in (just like PAM was configfured!) Obviously some people were not happy that what used to let users log in, now didn't! This fix is kinda hacky. We return ECONNREFUSED for all non-init relevant namespaces. That means that not only will the old broken non-init_net setups continue to work, now the broken non-init_pid or non-init_user setups will 'work'. They don't really work, since audit isn't logging things. But it's what most users want. In 3.15 we should have patches to support not only the non-init_net (3.14) namespace but also the non-init_pid and non-init_user namespace. So all will be right in the world. This just opens the doors wide open on 3.14 and hopefully makes users happy, if not the audit system... Reported-by: Andre Tomt <andre@tomt.net> Reported-by: Adam Richter <adam_richter2004@yahoo.com> Signed-off-by: Eric Paris <eparis@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Conflicts: kernel/audit.c
2014-03-31AUDIT: Allow login in non-init namespacesEric Paris
It its possible to configure your PAM stack to refuse login if audit messages (about the login) were unable to be sent. This is common in many distros and thus normal configuration of many containers. The PAM modules determine if audit is enabled/disabled in the kernel based on the return value from sending an audit message on the netlink socket. If userspace gets back ECONNREFUSED it believes audit is disabled in the kernel. If it gets any other error else it refuses to let the login proceed. Just about ever since the introduction of namespaces the kernel audit subsystem has returned EPERM if the task sending a message was not in the init user or pid namespace. So many forms of containers have never worked if audit was enabled in the kernel. BUT if the container was not in net_init then the kernel network code would send ECONNREFUSED (instead of the audit code sending EPERM). Thus by pure accident/dumb luck/bug if an admin configured the PAM stack to reject all logins that didn't talk to audit, but then ran the login untility in the non-init_net namespace, it would work!! Clearly this was a bug, but it is a bug some people expected. With the introduction of network namespace support in 3.14-rc1 the two bugs stopped cancelling each other out. Now, containers in the non-init_net namespace refused to let users log in (just like PAM was configfured!) Obviously some people were not happy that what used to let users log in, now didn't! This fix is kinda hacky. We return ECONNREFUSED for all non-init relevant namespaces. That means that not only will the old broken non-init_net setups continue to work, now the broken non-init_pid or non-init_user setups will 'work'. They don't really work, since audit isn't logging things. But it's what most users want. In 3.15 we should have patches to support not only the non-init_net (3.14) namespace but also the non-init_pid and non-init_user namespace. So all will be right in the world. This just opens the doors wide open on 3.14 and hopefully makes users happy, if not the audit system... Reported-by: Andre Tomt <andre@tomt.net> Reported-by: Adam Richter <adam_richter2004@yahoo.com> Signed-off-by: Eric Paris <eparis@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-03-24kernel: Use RCU_INIT_POINTER(x, NULL) in audit.cMonam Agarwal
This patch replaces rcu_assign_pointer(x, NULL) with RCU_INIT_POINTER(x, NULL) The rcu_assign_pointer() ensures that the initialization of a structure is carried out before storing a pointer to that structure. And in the case of the NULL pointer, there is no structure to initialize. So, rcu_assign_pointer(p, NULL) can be safely converted to RCU_INIT_POINTER(p, NULL) Signed-off-by: Monam Agarwal <monamagarwal123@gmail.com> Signed-off-by: Eric Paris <eparis@redhat.com>
2014-03-20audit: remove stray newlines from audit_log_lost messagesJosh Boyer
Calling audit_log_lost with a \n in the format string leads to extra newlines in dmesg. That function will eventually call audit_panic which uses pr_err with an explicit \n included. Just make these calls match the others that lack \n. Reported-by: Jonathan Kamens <jik@kamens.brookline.ma.us> Signed-off-by: Josh Boyer <jwboyer@fedoraproject.org> Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
2014-03-20audit: allow user processes to log from another PID namespaceRichard Guy Briggs
Still only permit the audit logging daemon and control to operate from the initial PID namespace, but allow processes to log from another PID namespace. Cc: "Eric W. Biederman" <ebiederm@xmission.com> (informed by ebiederman's c776b5d2) Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
2014-03-20audit: anchor all pid references in the initial pid namespaceRichard Guy Briggs
Store and log all PIDs with reference to the initial PID namespace and use the access functions task_pid_nr() and task_tgid_nr() for task->pid and task->tgid. Cc: "Eric W. Biederman" <ebiederm@xmission.com> (informed by ebiederman's c776b5d2) Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
2014-03-20audit: convert PPIDs to the inital PID namespace.Richard Guy Briggs
sys_getppid() returns the parent pid of the current process in its own pid namespace. Since audit filters are based in the init pid namespace, a process could avoid a filter or trigger an unintended one by being in an alternate pid namespace or log meaningless information. Switch to task_ppid_nr() for PPIDs to anchor all audit filters in the init_pid_ns. (informed by ebiederman's 6c621b7e) Cc: stable@vger.kernel.org Cc: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
2014-03-20audit: Send replies in the proper network namespace.Eric W. Biederman
In perverse cases of file descriptor passing the current network namespace of a process and the network namespace of a socket used by that socket may differ. Therefore use the network namespace of the appropiate socket to ensure replies always go to the appropiate socket. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Eric Paris <eparis@redhat.com>
2014-03-20audit: Use struct net not pid_t to remember the network namespce to reply inEric W. Biederman
While reading through 3.14-rc1 I found a pretty siginficant mishandling of network namespaces in the recent audit changes. In struct audit_netlink_list and audit_reply add a reference to the network namespace of the caller and remove the userspace pid of the caller. This cleanly remembers the callers network namespace, and removes a huge class of races and nasty failure modes that can occur when attempting to relook up the callers network namespace from a pid_t (including the caller's network namespace changing, pid wraparound, and the pid simply not being present). Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Eric Paris <eparis@redhat.com>
2014-03-08audit: Update kdoc for audit_send_reply and audit_list_rules_sendEric W. Biederman
The kbuild test robot reported: > tree: git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace.git for-next > head: 6f285b19d09f72e801525f5eea1bdad22e559bf0 > commit: 6f285b19d09f72e801525f5eea1bdad22e559bf0 [2/2] audit: Send replies in the proper network namespace. > reproduce: make htmldocs > > >> Warning(kernel/audit.c:575): No description found for parameter 'request_skb' > >> Warning(kernel/audit.c:575): Excess function parameter 'portid' description in 'audit_send_reply' > >> Warning(kernel/auditfilter.c:1074): No description found for parameter 'request_skb' > >> Warning(kernel/auditfilter.c:1074): Excess function parameter 'portid' description in 'audit_list_rules_s Which was caused by my failure to update the kdoc annotations when I updated the functions. Fix that small oversight now. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2014-03-01audit: Send replies in the proper network namespace.Eric W. Biederman
In perverse cases of file descriptor passing the current network namespace of a process and the network namespace of a socket used by that socket may differ. Therefore use the network namespace of the appropiate socket to ensure replies always go to the appropiate socket. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2014-02-28audit: Use struct net not pid_t to remember the network namespce to reply inEric W. Biederman
In struct audit_netlink_list and audit_reply add a reference to the network namespace of the caller and remove the userspace pid of the caller. This cleanly remembers the callers network namespace, and removes a huge class of races and nasty failure modes that can occur when attempting to relook up the callers network namespace from a pid_t (including the caller's network namespace changing, pid wraparound, and the pid simply not being present). Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2014-01-17audit: fix location of __net_initdata for audit_net_opsRichard Guy Briggs
Fixup caught by checkpatch. Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-17audit: remove pr_info for every network namespaceEric Paris
A message about creating the audit socket might be fine at startup, but a pr_info for every single network namespace created on a system isn't useful. Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-14audit: Convert int limit uses to u32Joe Perches
The equivalent uapi struct uses __u32 so make the kernel uses u32 too. This can prevent some oddities where the limit is logged/emitted as a negative value. Convert kstrtol to kstrtouint to disallow negative values. Signed-off-by: Joe Perches <joe@perches.com> [eparis: do not remove static from audit_default declaration]
2014-01-14audit: Use more current logging styleJoe Perches
Add pr_fmt to prefix "audit: " to output Convert printk(KERN_<LEVEL> to pr_<level> Coalesce formats Use pr_cont Move a brace after switch Signed-off-by: Joe Perches <joe@perches.com>
2014-01-14audit: Use hex_byte_pack_upperJoe Perches
Using the generic kernel function causes the object size to increase with gcc 4.8.1. $ size kernel/audit.o* text data bss dec hex filename 18577 6079 8436 33092 8144 kernel/audit.o.new 18579 6015 8420 33014 80f6 kernel/audit.o.old Unsigned...
2014-01-14audit: reorder AUDIT_TTY_SET argumentsEric Paris
An admin is likely to want to see old and new values next to each other. Putting all of the old values followed by all of the new values is just hard to read as a human. Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-14audit: rework AUDIT_TTY_SET to only grab spin_lock onceEric Paris
We can simplify the AUDIT_TTY_SET code to only grab the spin_lock one time. We need to determine if the new values are valid and if so, set the new values at the same time we grab the old onces. While we are here get rid of 'res' and just use err. Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-14audit: remove needless switch in AUDIT_SETEric Paris
If userspace specified that it was setting values via the mask we do not need a second check to see if they also set the version field high enough to understand those values. (clearly if they set the mask they knew those values). Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-14audit: use define's for audit versionEric Paris
Give names to the audit versions. Just something for a userspace programmer to know what the version provides. Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-14audit: wait_for_auditd rework for readabilityEric Paris
We had some craziness with signed to unsigned long casting which appears wholely unnecessary. Just use signed long. Even though 2 values of the math equation are unsigned longs the result is expected to be a signed long. So why keep casting the result to signed long? Just make it signed long and use it. We also remove the needless "timeout" variable. We already have the stack "sleep_time" variable. Just use that... Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-14audit: log task info on feature changeRichard Guy Briggs
Add task information to the log when changing a feature state. Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-14audit: fix incorrect set of audit_sockGao feng
NETLINK_CB(skb).sk is the socket of user space process, netlink_unicast in kauditd_send_skb wants the kernel side socket. Since the sk_state of audit netlink socket is not NETLINK_CONNECTED, so the netlink_getsockbyportid doesn't return -ECONNREFUSED. And the socket of userspace process can be released anytime, so the audit_sock may point to invalid socket. this patch sets the audit_sock to the kernel side audit netlink socket. Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com> Acked-by: Eric Paris <eparis@redhat.com> Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-14audit: print error message when fail to create audit socketGao feng
print the error message and then return -ENOMEM. Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com> Acked-by: Eric Paris <eparis@redhat.com> Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-14audit: log on errors from filter user rulesRichard Guy Briggs
An error on an AUDIT_NEVER rule disabled logging on that rule. On error on AUDIT_NEVER rules, log. Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-14audit: audit_log_start running on auditd should not stopToshiyuki Okajima
The backlog cannot be consumed when audit_log_start is running on auditd even if audit_log_start calls wait_for_auditd to consume it. The situation is the deadlock because only auditd can consume the backlog. If the other process needs to send the backlog, it can be also stopped by the deadlock. So, audit_log_start running on auditd should not stop. You can see the deadlock with the following reproducer: # auditctl -a exit,always -S all # reboot Signed-off-by: Toshiyuki Okajima <toshi.okajima@jp.fujitsu.com> Reviewed-by: gaofeng@cn.fujitsu.com Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-14audit: drop audit_cmd_lock in AUDIT_USER family of casesRichard Guy Briggs
We do not need to hold the audit_cmd_mutex for this family of cases. The possible exception to this is the call to audit_filter_user(), so drop the lock immediately after. To help in fixing the race we are trying to avoid, make sure that nothing called by audit_filter_user() calls audit_log_start(). In particular, watch out for *_audit_rule_match(). This fix will take care of systemd and anything USING audit. It still means that we could race with something configuring audit and auditd shutting down. Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Reported-by: toshi.okajima@jp.fujitsu.com Tested-by: toshi.okajima@jp.fujitsu.com Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-14audit: convert all sessionid declaration to unsigned intEric Paris
Right now the sessionid value in the kernel is a combination of u32, int, and unsigned int. Just use unsigned int throughout. Signed-off-by: Eric Paris <eparis@redhat.com> Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-14audit: Added exe field to audit core dump signal logPaul Davies C
Currently when the coredump signals are logged by the audit system, the actual path to the executable is not logged. Without details of exe, the system admin may not have an exact idea on what program failed. This patch changes the audit_log_task() so that the path to the exe is also logged. This was copied from audit_log_task_info() and the latter enhanced to avoid disappearing text fields. Signed-off-by: Paul Davies C <pauldaviesc@gmail.com> Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-14audit: prevent an older auditd shutdown from orphaning a newer auditd startupRichard Guy Briggs
There have been reports of auditd restarts resulting in kaudit not being able to find a newly registered auditd. It results in reports such as: kernel: [ 2077.233573] audit: *NO* daemon at audit_pid=1614 kernel: [ 2077.234712] audit: audit_lost=97 audit_rate_limit=0 audit_backlog_limit=320 kernel: [ 2077.234718] audit: auditd disappeared (previously mis-spelled "dissapeared") One possible cause is a race between the shutdown of an older auditd and a newer one. If the newer one sets the daemon pid to itself in kauditd before the older one has cleared the daemon pid, the newer daemon pid will be erased. This could be caused by an automated system, or by manual intervention, but in either case, there is no use in having the older daemon clear the daemon pid reference since its old pid is no longer being referenced. This patch will prevent that specific case, returning an error of EACCES. The case for preventing a newer auditd from registering itself if there is an existing auditd is a more difficult case that is beyond the scope of this patch. Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-14audit: refactor audit_receive_msg() to clarify AUDIT_*_RULE* casesRichard Guy Briggs
audit_receive_msg() needlessly contained a fallthrough case that called audit_receive_filter(), containing no common code between the cases. Separate them to make the logic clearer. Refactor AUDIT_LIST_RULES, AUDIT_ADD_RULE, AUDIT_DEL_RULE cases to create audit_rule_change(), audit_list_rules_send() functions. This should not functionally change the logic. Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-14audit: log AUDIT_TTY_SET config changesRichard Guy Briggs
Log transition of config changes when AUDIT_TTY_SET is called, including both enabled and log_passwd values now in the struct. Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-14audit: get rid of *NO* daemon at audit_pid=0 messageRichard Guy Briggs
kauditd_send_skb is called after audit_pid was checked to be non-zero. However, it can be set to 0 due to auditd exiting while kauditd_send_skb is still executed and this can result in a spurious warning about missing auditd. Re-check audit_pid before printing the message. Signed-off-by: Mateusz Guzik <mguzik@redhat.com> Cc: Eric Paris <eparis@redhat.com> Cc: linux-kernel@vger.kernel.org Acked-by: Eric Paris <eparis@redhat.com> Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-14audit: allow unlimited backlog queueRichard Guy Briggs
Since audit can already be disabled by "audit=0" on the kernel boot line, or by the command "auditctl -e 0", it would be more useful to have the audit_backlog_limit set to zero mean effectively unlimited (limited only by system RAM). Acked-by: Gao feng <gaofeng@cn.fujitsu.com> Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-14audit: use old_lock in audit_set_featureGao feng
we already have old_lock, no need to calculate it again. Acked-by: Eric Paris <eparis@redhat.com> Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com> Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-14audit: don't generate audit feature changed log when audit disabledGao feng
If audit is disabled,we shouldn't generate the audit log. Acked-by: Eric Paris <eparis@redhat.com> Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com> Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-14audit: fix incorrect order of log new and old featureGao feng
The order of new feature and old feature is incorrect, this patch fix it. Acked-by: Eric Paris <eparis@redhat.com> Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com> Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-14audit: remove useless code in audit_enableGao feng
Since kernel parameter is operated before initcall, so the audit_initialized must be AUDIT_UNINITIALIZED or DISABLED in audit_enable. Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com> Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-14audit: add audit_backlog_wait_time configuration optionRichard Guy Briggs
reaahead-collector abuses the audit logging facility to discover which files are accessed at boot time to make a pre-load list Add a tuning option to audit_backlog_wait_time so that if auditd can't keep up, or gets blocked, the callers won't be blocked. Bump audit_status API version to "2". Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-14audit: clean up AUDIT_GET/SET local variables and future-proof APIRichard Guy Briggs
Re-named confusing local variable names (status_set and status_get didn't agree with their command type name) and reduced their scope. Future-proof API changes by not depending on the exact size of the audit_status struct and by adding an API version field. Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-14audit: add kernel set-up parameter to override default backlog limitRichard Guy Briggs
The default audit_backlog_limit is 64. This was a reasonable limit at one time. systemd causes so much audit queue activity on startup that auditd doesn't start before the backlog queue has already overflowed by more than a factor of 2. On a system with audit= not set on the kernel command line, this isn't an issue since that history isn't kept for auditd when it is available. On a system with audit=1 set on the kernel command line, kaudit tries to keep that history until auditd is able to drain the queue. This default can be changed by the "-b" option in audit.rules once the system has booted, but won't help with lost messages on boot. One way to solve this would be to increase the default backlog queue size to avoid losing any messages before auditd is able to consume them. This would be overkill to the embedded community and insufficient for some servers. Another way to solve it might be to add a kconfig option to set the default based on the system type. An embedded system would get the current (or smaller) default, while Workstations might get more than now and servers might get more. None of these solutions helps if a system's compiled default is too small to see the lost messages without compiling a new kernel. This patch adds a kernel set-up parameter (audit already has one to enable/disable it) "audit_backlog_limit=<n>" that overrides the default to allow the system administrator to set the backlog limit. Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Eric Paris <eparis@redhat.com>