summaryrefslogtreecommitdiff
path: root/kernel/rcu/tree.h
AgeCommit message (Collapse)Author
2016-08-22rcu: Drive expedited grace periods from workqueuePaul E. McKenney
The current implementation of expedited grace periods has the user task drive the grace period. This works, but has downsides: (1) The user task must awaken tasks piggybacking on this grace period, which can result in latencies rivaling that of the grace period itself, and (2) User tasks can receive signals, which interfere with RCU CPU stall warnings. This commit therefore uses workqueues to drive the grace periods, so that the user task need not do the awakening. A subsequent commit will remove the now-unnecessary code allowing for signals. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2016-06-15rcu: Correctly handle sparse possible cpusMark Rutland
In many cases in the RCU tree code, we iterate over the set of cpus for a leaf node described by rcu_node::grplo and rcu_node::grphi, checking per-cpu data for each cpu in this range. However, if the set of possible cpus is sparse, some cpus described in this range are not possible, and thus no per-cpu region will have been allocated (or initialised) for them by the generic percpu code. Erroneous accesses to a per-cpu area for these !possible cpus may fault or may hit other data depending on the addressed generated when the erroneous per cpu offset is applied. In practice, both cases have been observed on arm64 hardware (the former being silent, but detectable with additional patches). To avoid issues resulting from this, we must iterate over the set of *possible* cpus for a given leaf node. This patch add a new helper, for_each_leaf_node_possible_cpu, to enable this. As iteration is often intertwined with rcu_node local bitmask manipulation, a new leaf_node_cpu_bit helper is added to make this simpler and more consistent. The RCU tree code is made to use both of these where appropriate. Without this patch, running reboot at a shell can result in an oops like: [ 3369.075979] Unable to handle kernel paging request at virtual address ffffff8008b21b4c [ 3369.083881] pgd = ffffffc3ecdda000 [ 3369.087270] [ffffff8008b21b4c] *pgd=00000083eca48003, *pud=00000083eca48003, *pmd=0000000000000000 [ 3369.096222] Internal error: Oops: 96000007 [#1] PREEMPT SMP [ 3369.101781] Modules linked in: [ 3369.104825] CPU: 2 PID: 1817 Comm: NetworkManager Tainted: G W 4.6.0+ #3 [ 3369.121239] task: ffffffc0fa13e000 ti: ffffffc3eb940000 task.ti: ffffffc3eb940000 [ 3369.128708] PC is at sync_rcu_exp_select_cpus+0x188/0x510 [ 3369.134094] LR is at sync_rcu_exp_select_cpus+0x104/0x510 [ 3369.139479] pc : [<ffffff80081109a8>] lr : [<ffffff8008110924>] pstate: 200001c5 [ 3369.146860] sp : ffffffc3eb9435a0 [ 3369.150162] x29: ffffffc3eb9435a0 x28: ffffff8008be4f88 [ 3369.155465] x27: ffffff8008b66c80 x26: ffffffc3eceb2600 [ 3369.160767] x25: 0000000000000001 x24: ffffff8008be4f88 [ 3369.166070] x23: ffffff8008b51c3c x22: ffffff8008b66c80 [ 3369.171371] x21: 0000000000000001 x20: ffffff8008b21b40 [ 3369.176673] x19: ffffff8008b66c80 x18: 0000000000000000 [ 3369.181975] x17: 0000007fa951a010 x16: ffffff80086a30f0 [ 3369.187278] x15: 0000007fa9505590 x14: 0000000000000000 [ 3369.192580] x13: ffffff8008b51000 x12: ffffffc3eb940000 [ 3369.197882] x11: 0000000000000006 x10: ffffff8008b51b78 [ 3369.203184] x9 : 0000000000000001 x8 : ffffff8008be4000 [ 3369.208486] x7 : ffffff8008b21b40 x6 : 0000000000001003 [ 3369.213788] x5 : 0000000000000000 x4 : ffffff8008b27280 [ 3369.219090] x3 : ffffff8008b21b4c x2 : 0000000000000001 [ 3369.224406] x1 : 0000000000000001 x0 : 0000000000000140 ... [ 3369.972257] [<ffffff80081109a8>] sync_rcu_exp_select_cpus+0x188/0x510 [ 3369.978685] [<ffffff80081128b4>] synchronize_rcu_expedited+0x64/0xa8 [ 3369.985026] [<ffffff80086b987c>] synchronize_net+0x24/0x30 [ 3369.990499] [<ffffff80086ddb54>] dev_deactivate_many+0x28c/0x298 [ 3369.996493] [<ffffff80086b6bb8>] __dev_close_many+0x60/0xd0 [ 3370.002052] [<ffffff80086b6d48>] __dev_close+0x28/0x40 [ 3370.007178] [<ffffff80086bf62c>] __dev_change_flags+0x8c/0x158 [ 3370.012999] [<ffffff80086bf718>] dev_change_flags+0x20/0x60 [ 3370.018558] [<ffffff80086cf7f0>] do_setlink+0x288/0x918 [ 3370.023771] [<ffffff80086d0798>] rtnl_newlink+0x398/0x6a8 [ 3370.029158] [<ffffff80086cee84>] rtnetlink_rcv_msg+0xe4/0x220 [ 3370.034891] [<ffffff80086e274c>] netlink_rcv_skb+0xc4/0xf8 [ 3370.040364] [<ffffff80086ced8c>] rtnetlink_rcv+0x2c/0x40 [ 3370.045663] [<ffffff80086e1fe8>] netlink_unicast+0x160/0x238 [ 3370.051309] [<ffffff80086e24b8>] netlink_sendmsg+0x2f0/0x358 [ 3370.056956] [<ffffff80086a0070>] sock_sendmsg+0x18/0x30 [ 3370.062168] [<ffffff80086a21cc>] ___sys_sendmsg+0x26c/0x280 [ 3370.067728] [<ffffff80086a30ac>] __sys_sendmsg+0x44/0x88 [ 3370.073027] [<ffffff80086a3100>] SyS_sendmsg+0x10/0x20 [ 3370.078153] [<ffffff8008085e70>] el0_svc_naked+0x24/0x28 Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reported-by: Dennis Chen <dennis.chen@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Lai Jiangshan <jiangshanlai@gmail.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Steve Capper <steve.capper@arm.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Will Deacon <will.deacon@arm.com> Cc: linux-kernel@vger.kernel.org Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2016-04-21Merge branches 'doc.2016.04.19a', 'exp.2016.03.31d', 'fixes.2016.03.31d' and ↵Paul E. McKenney
'torture.2016.04.21a' into HEAD doc.2016.04.19a: Documentation updates exp.2016.03.31d: Expedited grace-period updates fixes.2016.03.31d: Miscellaneous fixes torture.2016.004.21a Torture-test updates
2016-03-31rcu: Awaken grace-period kthread if too long since FQSPaul E. McKenney
Recent kernels can fail to awaken the grace-period kthread for quiescent-state forcing. This commit is a crude hack that does a wakeup if a scheduling-clock interrupt sees that it has been too long since force-quiescent-state (FQS) processing. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2016-03-31rcu: Overlap wakeups with next expedited grace periodPaul E. McKenney
The current expedited grace-period implementation makes subsequent grace periods wait on wakeups for the prior grace period. This does not fit the dictionary definition of "expedited", so this commit allows these two phases to overlap. Doing this requires four waitqueues rather than two because tasks can now be waiting on the previous, current, and next grace periods. The fourth waitqueue makes the bit masking work out nicely. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2016-03-31rcu: Enforce expedited-GP fairness via funnel wait queuePaul E. McKenney
The current mutex-based funnel-locking approach used by expedited grace periods is subject to severe unfairness. The problem arises when a few tasks, making a path from leaves to root, all wake up before other tasks do. A new task can then follow this path all the way to the root, which needlessly delays tasks whose grace period is done, but who do not happen to acquire the lock quickly enough. This commit avoids this problem by maintaining per-rcu_node wait queues, along with a per-rcu_node counter that tracks the latest grace period sought by an earlier task to visit this node. If that grace period would satisfy the current task, instead of proceeding up the tree, it waits on the current rcu_node structure using a pair of wait queues provided for that purpose. This decouples awakening of old tasks from the arrival of new tasks. If the wakeups prove to be a bottleneck, additional kthreads can be brought to bear for that purpose. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2016-03-31rcu: Shorten expedited_workdone* to exp_workdone*Paul E. McKenney
Just a name change to save a few lines and a bit of typing. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2016-03-31rcu: Remove expedited GP funnel-lock bypassPaul E. McKenney
Commit #cdacbe1f91264 ("rcu: Add fastpath bypassing funnel locking") turns out to be a pessimization at high load because it forces a tree full of tasks to wait for an expedited grace period that they probably do not need. This commit therefore removes this optimization. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2016-03-15Merge commit 'fixes.2015.02.23a' into core/rcuIngo Molnar
Conflicts: kernel/rcu/tree.c Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-25rcu: Use simple wait queues where possible in rcutreePaul Gortmaker
As of commit dae6e64d2bcfd ("rcu: Introduce proper blocking to no-CBs kthreads GP waits") the RCU subsystem started making use of wait queues. Here we convert all additions of RCU wait queues to use simple wait queues, since they don't need the extra overhead of the full wait queue features. Originally this was done for RT kernels[1], since we would get things like... BUG: sleeping function called from invalid context at kernel/rtmutex.c:659 in_atomic(): 1, irqs_disabled(): 1, pid: 8, name: rcu_preempt Pid: 8, comm: rcu_preempt Not tainted Call Trace: [<ffffffff8106c8d0>] __might_sleep+0xd0/0xf0 [<ffffffff817d77b4>] rt_spin_lock+0x24/0x50 [<ffffffff8106fcf6>] __wake_up+0x36/0x70 [<ffffffff810c4542>] rcu_gp_kthread+0x4d2/0x680 [<ffffffff8105f910>] ? __init_waitqueue_head+0x50/0x50 [<ffffffff810c4070>] ? rcu_gp_fqs+0x80/0x80 [<ffffffff8105eabb>] kthread+0xdb/0xe0 [<ffffffff8106b912>] ? finish_task_switch+0x52/0x100 [<ffffffff817e0754>] kernel_thread_helper+0x4/0x10 [<ffffffff8105e9e0>] ? __init_kthread_worker+0x60/0x60 [<ffffffff817e0750>] ? gs_change+0xb/0xb ...and hence simple wait queues were deployed on RT out of necessity (as simple wait uses a raw lock), but mainline might as well take advantage of the more streamline support as well. [1] This is a carry forward of work from v3.10-rt; the original conversion was by Thomas on an earlier -rt version, and Sebastian extended it to additional post-3.10 added RCU waiters; here I've added a commit log and unified the RCU changes into one, and uprev'd it to match mainline RCU. Signed-off-by: Daniel Wagner <daniel.wagner@bmw-carit.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: linux-rt-users@vger.kernel.org Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1455871601-27484-6-git-send-email-wagi@monom.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-02-25rcu: Do not call rcu_nocb_gp_cleanup() while holding rnp->lockDaniel Wagner
rcu_nocb_gp_cleanup() is called while holding rnp->lock. Currently, this is okay because the wake_up_all() in rcu_nocb_gp_cleanup() will not enable the IRQs. lockdep is happy. By switching over using swait this is not true anymore. swake_up_all() enables the IRQs while processing the waiters. __do_softirq() can now run and will eventually call rcu_process_callbacks() which wants to grap nrp->lock. Let's move the rcu_nocb_gp_cleanup() call outside the lock before we switch over to swait. If we would hold the rnp->lock and use swait, lockdep reports following: ================================= [ INFO: inconsistent lock state ] 4.2.0-rc5-00025-g9a73ba0 #136 Not tainted --------------------------------- inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage. rcu_preempt/8 [HC0[0]:SC0[0]:HE1:SE1] takes: (rcu_node_1){+.?...}, at: [<ffffffff811387c7>] rcu_gp_kthread+0xb97/0xeb0 {IN-SOFTIRQ-W} state was registered at: [<ffffffff81109b9f>] __lock_acquire+0xd5f/0x21e0 [<ffffffff8110be0f>] lock_acquire+0xdf/0x2b0 [<ffffffff81841cc9>] _raw_spin_lock_irqsave+0x59/0xa0 [<ffffffff81136991>] rcu_process_callbacks+0x141/0x3c0 [<ffffffff810b1a9d>] __do_softirq+0x14d/0x670 [<ffffffff810b2214>] irq_exit+0x104/0x110 [<ffffffff81844e96>] smp_apic_timer_interrupt+0x46/0x60 [<ffffffff81842e70>] apic_timer_interrupt+0x70/0x80 [<ffffffff810dba66>] rq_attach_root+0xa6/0x100 [<ffffffff810dbc2d>] cpu_attach_domain+0x16d/0x650 [<ffffffff810e4b42>] build_sched_domains+0x942/0xb00 [<ffffffff821777c2>] sched_init_smp+0x509/0x5c1 [<ffffffff821551e3>] kernel_init_freeable+0x172/0x28f [<ffffffff8182cdce>] kernel_init+0xe/0xe0 [<ffffffff8184231f>] ret_from_fork+0x3f/0x70 irq event stamp: 76 hardirqs last enabled at (75): [<ffffffff81841330>] _raw_spin_unlock_irq+0x30/0x60 hardirqs last disabled at (76): [<ffffffff8184116f>] _raw_spin_lock_irq+0x1f/0x90 softirqs last enabled at (0): [<ffffffff810a8df2>] copy_process.part.26+0x602/0x1cf0 softirqs last disabled at (0): [< (null)>] (null) other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(rcu_node_1); <Interrupt> lock(rcu_node_1); *** DEADLOCK *** 1 lock held by rcu_preempt/8: #0: (rcu_node_1){+.?...}, at: [<ffffffff811387c7>] rcu_gp_kthread+0xb97/0xeb0 stack backtrace: CPU: 0 PID: 8 Comm: rcu_preempt Not tainted 4.2.0-rc5-00025-g9a73ba0 #136 Hardware name: Dell Inc. PowerEdge R820/066N7P, BIOS 2.0.20 01/16/2014 0000000000000000 000000006d7e67d8 ffff881fb081fbd8 ffffffff818379e0 0000000000000000 ffff881fb0812a00 ffff881fb081fc38 ffffffff8110813b 0000000000000000 0000000000000001 ffff881f00000001 ffffffff8102fa4f Call Trace: [<ffffffff818379e0>] dump_stack+0x4f/0x7b [<ffffffff8110813b>] print_usage_bug+0x1db/0x1e0 [<ffffffff8102fa4f>] ? save_stack_trace+0x2f/0x50 [<ffffffff811087ad>] mark_lock+0x66d/0x6e0 [<ffffffff81107790>] ? check_usage_forwards+0x150/0x150 [<ffffffff81108898>] mark_held_locks+0x78/0xa0 [<ffffffff81841330>] ? _raw_spin_unlock_irq+0x30/0x60 [<ffffffff81108a28>] trace_hardirqs_on_caller+0x168/0x220 [<ffffffff81108aed>] trace_hardirqs_on+0xd/0x10 [<ffffffff81841330>] _raw_spin_unlock_irq+0x30/0x60 [<ffffffff810fd1c7>] swake_up_all+0xb7/0xe0 [<ffffffff811386e1>] rcu_gp_kthread+0xab1/0xeb0 [<ffffffff811089bf>] ? trace_hardirqs_on_caller+0xff/0x220 [<ffffffff81841341>] ? _raw_spin_unlock_irq+0x41/0x60 [<ffffffff81137c30>] ? rcu_barrier+0x20/0x20 [<ffffffff810d2014>] kthread+0x104/0x120 [<ffffffff81841330>] ? _raw_spin_unlock_irq+0x30/0x60 [<ffffffff810d1f10>] ? kthread_create_on_node+0x260/0x260 [<ffffffff8184231f>] ret_from_fork+0x3f/0x70 [<ffffffff810d1f10>] ? kthread_create_on_node+0x260/0x260 Signed-off-by: Daniel Wagner <daniel.wagner@bmw-carit.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: linux-rt-users@vger.kernel.org Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1455871601-27484-5-git-send-email-wagi@monom.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-02-24RCU: Privatize rcu_node::lockBoqun Feng
In patch: "rcu: Add transitivity to remaining rcu_node ->lock acquisitions" All locking operations on rcu_node::lock are replaced with the wrappers because of the need of transitivity, which indicates we should never write code using LOCK primitives alone(i.e. without a proper barrier following) on rcu_node::lock outside those wrappers. We could detect this kind of misuses on rcu_node::lock in the future by adding __private modifier on rcu_node::lock. To privatize rcu_node::lock, unlock wrappers are also needed. Replacing spinlock unlocks with these wrappers not only privatizes rcu_node::lock but also makes it easier to figure out critical sections of rcu_node. This patch adds __private modifier to rcu_node::lock and makes every access to it wrapped by ACCESS_PRIVATE(). Besides, unlock wrappers are added and raw_spin_unlock(&rnp->lock) and its friends are replaced with those wrappers. Signed-off-by: Boqun Feng <boqun.feng@gmail.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2015-12-08Merge branches 'doc.2015.12.05a', 'exp.2015.12.07a', 'fixes.2015.12.07a', ↵Paul E. McKenney
'list.2015.12.04b' and 'torture.2015.12.05a' into HEAD doc.2015.12.05a: Documentation updates exp.2015.12.07a: Expedited grace-period updates fixes.2015.12.07a: Miscellaneous fixes list.2015.12.04b: Linked-list updates torture.2015.12.05a: Torture-test updates
2015-12-06rcutorture: Print symbolic name for ->gp_statePaul E. McKenney
Currently, ->gp_state is printed as an integer, which slows debugging. This commit therefore prints a symbolic name in addition to the integer. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> [ paulmck: Updated to fix relational operator called out by Dan Carpenter. ] [ paulmck: More "const", as suggested by Josh Triplett. ] Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2015-12-04rcu: Reduce expedited GP memory contention via per-CPU variablesPaul E. McKenney
Currently, the piggybacked-work checks carried out by sync_exp_work_done() atomically increment a small set of variables (the ->expedited_workdone0, ->expedited_workdone1, ->expedited_workdone2, ->expedited_workdone3 fields in the rcu_state structure), which will form a memory-contention bottleneck given a sufficiently large number of CPUs concurrently invoking either synchronize_rcu_expedited() or synchronize_sched_expedited(). This commit therefore moves these for fields to the per-CPU rcu_data structure, eliminating the memory contention. The show_rcuexp() function also changes to sum up each field in the rcu_data structures. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2015-12-04rcu: Clarify role of ->expmaskinitnextPaul E. McKenney
Analogy with the ->qsmaskinitnext field might lead one to believe that ->expmaskinitnext tracks online CPUs. This belief is incorrect: Any CPU that has ever been online will have its bit set in the ->expmaskinitnext field. This commit therefore adds a comment to make this clear, at least to people who read comments. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2015-11-23rcu: Create transitive rnp->lock acquisition functionsPeter Zijlstra
Providing RCU's memory-ordering guarantees requires that the rcu_node tree's locking provide transitive memory ordering, which the Linux kernel's spinlocks currently do not provide unless smp_mb__after_unlock_lock() is used. Having a separate smp_mb__after_unlock_lock() after each and every lock acquisition is error-prone, hard to read, and a bit annoying, so this commit provides wrapper functions that pull in the smp_mb__after_unlock_lock() invocations. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2015-10-07Merge branches 'fixes.2015.10.06a' and 'exp.2015.10.07a' into HEADPaul E. McKenney
exp.2015.10.07a: Reduce OS jitter of RCU-sched expedited grace periods. fixes.2015.10.06a: Miscellaneous fixes.
2015-10-07rcu: Add online/offline info to expedited stall warning messagePaul E. McKenney
This commit makes the RCU CPU stall warning message print online/offline indications immediately after the CPU number. A "O" indicates global offline, a "." global online, and a "o" indicates RCU believes that the CPU is offline for the current grace period and "." otherwise, and an "N" indicates that RCU believes that the CPU will be offline for the next grace period, and "." otherwise, all right after the CPU number. So for CPU 10, you would normally see "10-...:" indicating that everything believes that the CPU is online. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2015-10-07rcu: Stop silencing lockdep false positive for expedited grace periodsPaul E. McKenney
This reverts commit af859beaaba4 (rcu: Silence lockdep false positive for expedited grace periods). Because synchronize_rcu_expedited() no longer invokes synchronize_sched_expedited(), ->exp_funnel_mutex acquisition is no longer nested, so the false positive no longer happens. This commit therefore removes the extra lockdep data structures, as they are no longer needed.
2015-10-07rcu: Switch synchronize_sched_expedited() to IPIPaul E. McKenney
This commit switches synchronize_sched_expedited() from stop_one_cpu_nowait() to smp_call_function_single(), thus moving from an IPI and a pair of context switches to an IPI and a single pass through the scheduler. Of course, if the scheduler actually does decide to switch to a different task, there will still be a pair of context switches, but there would likely have been a pair of context switches anyway, just a bit later. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2015-10-06rcu: Correct comment for values of ->gp_state fieldPaul E. McKenney
This commit corrects the comment for the values of the ->gp_state field, which previously incorrectly said that these were for the ->gp_flags field. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2015-10-06rcu: Finish folding ->fqs_state into ->gp_statePetr Mladek
Commit commit 4cdfc175c25c89ee ("rcu: Move quiescent-state forcing into kthread") started the process of folding the old ->fqs_state into ->gp_state, but did not complete it. This situation does not cause any malfunction, but can result in extremely confusing trace output. This commit completes this task of eliminating ->fqs_state in favor of ->gp_state. The old ->fqs_state was also used to decide when to collect dyntick-idle snapshots. For this purpose, we add a boolean variable into the kthread, which is set on the first call to rcu_gp_fqs() for a given grace period and clear otherwise. Signed-off-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2015-10-06rcu: Use call_rcu_func_t to replace explicit type equivalentsBoqun Feng
We have had the call_rcu_func_t typedef for a quite awhile, but we still use explicit function pointer types in some places. These types can confuse cscope and can be hard to read. This patch therefore replaces these types with the call_rcu_func_t typedef. Signed-off-by: Boqun Feng <boqun.feng@gmail.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2015-10-06rcu: Use rcu_callback_t in call_rcu*() and friendsBoqun Feng
As we now have rcu_callback_t typedefs as the type of rcu callbacks, we should use it in call_rcu*() and friends as the type of parameters. This could save us a few lines of code and make it clear which function requires an rcu callbacks rather than other callbacks as its argument. Besides, this can also help cscope to generate a better database for code reading. Signed-off-by: Boqun Feng <boqun.feng@gmail.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2015-09-21rcu: Make ->cpu_no_qs be a union for aggregate ORPaul E. McKenney
This commit converts the rcu_data structure's ->cpu_no_qs field to a union. The bytewise side of this union allows individual access to indications as to whether this CPU needs to find a quiescent state for a normal (.norm) and/or expedited (.exp) grace period. The setwise side of the union allows testing whether or not a quiescent state is needed at all, for either type of grace period. For now, only .norm is used. A later commit will introduce the expedited usage. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2015-09-21rcu: Invert passed_quiesce and rename to cpu_no_qsPaul E. McKenney
This commit inverts the sense of the rcu_data structure's ->passed_quiesce field and renames it to ->cpu_no_qs. This will allow a later commit to use an "aggregate OR" operation to test expedited as well as normal grace periods without added overhead. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2015-09-21rcu: Rename qs_pending to core_needs_qsPaul E. McKenney
An upcoming commit needs to invert the sense of the ->passed_quiesce rcu_data structure field, so this commit is taking this opportunity to clarify things a bit by renaming ->qs_pending to ->core_needs_qs. So if !rdp->core_needs_qs, then this CPU need not concern itself with quiescent states, in particular, it need not acquire its leaf rcu_node structure's ->lock to check. Otherwise, it needs to report the next quiescent state. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2015-09-21rcu: Move synchronize_sched_expedited() to combining treePaul E. McKenney
Currently, synchronize_sched_expedited() uses a single global counter to track the number of remaining context switches that the current expedited grace period must wait on. This is problematic on large systems, where the resulting memory contention can be pathological. This commit therefore makes synchronize_sched_expedited() instead use the combining tree in the same manner as synchronize_rcu_expedited(), keeping memory contention down to a dull roar. This commit creates a temporary function sync_sched_exp_select_cpus() that is very similar to sync_rcu_exp_select_cpus(). A later commit will consolidate these two functions, which becomes possible when synchronize_sched_expedited() switches from stop_one_cpu_nowait() to smp_call_function_single(). Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2015-09-21rcu: Consolidate tree setup for synchronize_rcu_expedited()Paul E. McKenney
This commit replaces sync_rcu_preempt_exp_init1(() and sync_rcu_preempt_exp_init2() with sync_exp_reset_tree_hotplug() and sync_exp_reset_tree(), which will also be used by synchronize_sched_expedited(), and sync_rcu_exp_select_nodes(), which contains code specific to synchronize_rcu_expedited(). Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2015-08-04rcu,locking: Privatize smp_mb__after_unlock_lock()Paul E. McKenney
RCU is the only thing that uses smp_mb__after_unlock_lock(), and is likely the only thing that ever will use it, so this commit makes this macro private to RCU. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "linux-arch@vger.kernel.org" <linux-arch@vger.kernel.org>
2015-08-04rcu: Silence lockdep false positive for expedited grace periodsPaul E. McKenney
In a CONFIG_PREEMPT=y kernel, synchronize_rcu_expedited() acquires the ->exp_funnel_mutex in rcu_preempt_state, then invokes synchronize_sched_expedited, which acquires the ->exp_funnel_mutex in rcu_sched_state. There can be no deadlock because rcu_preempt_state ->exp_funnel_mutex acquisition always precedes that of rcu_sched_state. But lockdep does not know that, so it gives false-positive splats. This commit therefore associates a separate lock_class_key structure with the rcu_sched_state structure's ->exp_funnel_mutex, allowing lockdep to see the lock ordering, avoiding the false positives. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2015-07-17rcu: Add fastpath bypassing funnel lockingPaul E. McKenney
In the common case, there will be only one expedited grace period in the system at a given time, in which case it is not helpful to use funnel locking. This commit therefore adds a fastpath that bypasses funnel locking when the root ->exp_funnel_mutex is not held. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2015-07-17rcu: Rename RCU_GP_DONE_FQS to RCU_GP_DOING_FQSPaul E. McKenney
The grace-period kthread sleeps waiting to do a force-quiescent-state scan, and when awakened sets rsp->gp_state to RCU_GP_DONE_FQS. However, this is confusing because the kthread has not done the force-quiescent-state, but is instead just starting to do it. This commit therefore renames RCU_GP_DONE_FQS to RCU_GP_DOING_FQS in order to make things a bit easier on reviewers. Reported-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2015-07-17rcu: Add stall warnings to synchronize_sched_expedited()Paul E. McKenney
Although synchronize_sched_expedited() historically has no RCU CPU stall warnings, the availability of the rcupdate.rcu_expedited boot parameter invalidates the old assumption that synchronize_sched()'s stall warnings would suffice. This commit therefore adds RCU CPU stall warnings to synchronize_sched_expedited(). Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2015-07-17rcu: Extend expedited funnel locking to rcu_data structurePaul E. McKenney
The strictly rcu_node based funnel-locking scheme works well in many cases, but systems with CONFIG_RCU_FANOUT_LEAF=64 won't necessarily get all that much concurrency. This commit therefore extends the funnel locking into the per-CPU rcu_data structure, providing concurrency equal to the number of CPUs. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2015-07-17rcu: Apply rcu_seq operations to _rcu_barrier()Paul E. McKenney
The rcu_seq operations were open-coded in _rcu_barrier(), so this commit replaces the open-coding with the shiny new rcu_seq operations. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2015-07-17rcu: Make expedited GP CPU stoppage asynchronousPeter Zijlstra
Sequentially stopping the CPUs slows down expedited grace periods by at least a factor of two, based on rcutorture's grace-period-per-second rate. This is a conservative measure because rcutorture uses unusually long RCU read-side critical sections and because rcutorture periodically quiesces the system in order to test RCU's ability to ramp down to and up from the idle state. This commit therefore replaces the stop_one_cpu() with stop_one_cpu_nowait(), using an atomic-counter scheme to determine when all CPUs have passed through the stopped state. Signed-off-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2015-07-17rcu: Get rid of synchronize_sched_expedited()'s polling loopPaul E. McKenney
This commit gets rid of synchronize_sched_expedited()'s mutex_trylock() polling loop in favor of a funnel-locking scheme based on the rcu_node tree. The work-done check is done at each level of the tree, allowing high-contention situations to be resolved quickly with reasonable levels of mutex contention. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2015-07-17rcu: Rework synchronize_sched_expedited() counter handlingPaul E. McKenney
Now that synchronize_sched_expedited() have a mutex, it can use simpler work-already-done detection scheme. This commit simplifies this scheme by using something similar to the sequence-locking counter scheme. A counter is incremented before and after each grace period, so that the counter is odd in the midst of the grace period and even otherwise. So if the counter has advanced to the second even number that is greater than or equal to the snapshot, the required grace period has already happened. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2015-07-17rcu: Switch synchronize_sched_expedited() to stop_one_cpu()Peter Zijlstra
The synchronize_sched_expedited() currently invokes try_stop_cpus(), which schedules the stopper kthreads on each online non-idle CPU, and waits until all those kthreads are running before letting any of them stop. This is disastrous for real-time workloads, which get hit with a preemption that is as long as the longest scheduling latency on any CPU, including any non-realtime housekeeping CPUs. This commit therefore switches to using stop_one_cpu() on each CPU in turn. This avoids inflicting the worst-case scheduling latency on the worst-case CPU onto all other CPUs, and also simplifies the code a little bit. Follow-up commits will simplify the counter-snapshotting algorithm and convert a number of the counters that are now protected by the new ->expedited_mutex to non-atomic. Signed-off-by: Peter Zijlstra <peterz@infradead.org> [ paulmck: Kept stop_one_cpu(), dropped disabling of "guardrails". ] Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2015-07-17rcu: Remove CONFIG_RCU_CPU_STALL_INFOPaul E. McKenney
The CONFIG_RCU_CPU_STALL_INFO has been default-y for a couple of releases with no complaints, so it is time to eliminate this Kconfig option entirely, so that the long-form RCU CPU stall warnings cannot be disabled. This commit does just that. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2015-07-17rcu: Shut up bogus gcc array bounds warningAlexander Gordeev
Because gcc does not realize a loop would not be entered ever (i.e. in case of rcu_num_lvls == 1): for (i = 1; i < rcu_num_lvls; i++) rsp->level[i] = rsp->level[i - 1] + levelcnt[i - 1]; some compiler (pre- 5.x?) versions give a bogus warning: kernel/rcu/tree.c: In function ‘rcu_init_one.isra.55’: kernel/rcu/tree.c:4108:13: warning: array subscript is above array bounds [-Warray-bounds] rsp->level[i] = rsp->level[i - 1] + rsp->levelcnt[i - 1]; ^ Fix that warning by adding an extra item to rcu_state::level[] array. Once the bogus warning is fixed in gcc and kernel drops support of older versions, the dummy item may be removed from the array. Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Suggested-by: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2015-07-15rcu: Simplify arithmetic to calculate number of RCU nodesAlexander Gordeev
This update makes arithmetic to calculate number of RCU nodes more straight and easy to read. Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2015-07-15rcu: Limit count of static data to the number of RCU levelsAlexander Gordeev
Although a number of RCU levels may be less than the current maximum of four, some static data associated with each level are allocated for all four levels. As result, the extra data never get accessed and just wast memory. This update limits count of allocated items to the number of used RCU levels. Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2015-07-15rcu: Remove unnecessary fields from rcu_state structureAlexander Gordeev
Members rcu_state::levelcnt[] and rcu_state::levelspread[] are only used at init. There is no reason to keep them afterwards. Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2015-07-15rcu: Limit rcu_capacity[] size to RCU_NUM_LVLS itemsAlexander Gordeev
Number of items in rcu_capacity[] array is defined by macro MAX_RCU_LVLS. However, that array is never accessed beyond RCU_NUM_LVLS index. Therefore, we can limit the array to RCU_NUM_LVLS items and eliminate MAX_RCU_LVLS. As result, in most cases the memory is conserved. Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2015-07-15rcu: Limit rcu_state::levelcnt[] to RCU_NUM_LVLS itemsAlexander Gordeev
Variable rcu_num_lvls is limited by RCU_NUM_LVLS macro. In turn, rcu_state::levelcnt[] array is never accessed beyond rcu_num_lvls. Thus, rcu_state::levelcnt[] is safe to limit to RCU_NUM_LVLS items. Since rcu_num_lvls could be changed during boot (as result of rcutree.rcu_fanout_leaf kernel parameter update) one might assume a new value could overflow the value of RCU_NUM_LVLS. However, that is not the case, since leaf-level fanout is only permitted to increase, resulting in rcu_num_lvls possibly to decrease. Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2015-07-15rcu: Provide more diagnostics for stalled GP kthreadPaul E. McKenney
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2015-05-27Merge branches 'array.2015.05.27a', 'doc.2015.05.27a', 'fixes.2015.05.27a', ↵Paul E. McKenney
'hotplug.2015.05.27a', 'init.2015.05.27a', 'tiny.2015.05.27a' and 'torture.2015.05.27a' into HEAD array.2015.05.27a: Remove all uses of RCU-protected array indexes. doc.2015.05.27a: Docuemntation updates. fixes.2015.05.27a: Miscellaneous fixes. hotplug.2015.05.27a: CPU-hotplug updates. init.2015.05.27a: Initialization/Kconfig updates. tiny.2015.05.27a: Updates to Tiny RCU. torture.2015.05.27a: Torture-testing updates.