| Age | Commit message (Collapse) | Author |
|---|
|
insert_resource() and remove_resouce() are called by producers
of resources, such as FW modules and bus drivers. These modules
may be implemented as loadable modules.
Export insert_resource() and remove_resouce() so that they can
be called from such modules.
link: https://lkml.org/lkml/2016/3/8/872
Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
insert_resource() and insert_resource_conflict() are called
by resource producers to insert a new resource. When there
is any conflict, they move conflicting resources down to the
children of the new resource. There is no destructor of these
interfaces, however.
Add remove_resource(), which removes a resource previously
inserted by insert_resource() or insert_resource_conflict(),
and moves the children up to where they were before.
__release_resource() is changed to have @release_child, so
that this function can be used for remove_resource() as well.
Also add comments to clarify that these functions are intended
for producers of resources to avoid any confusion with
request/release_resource() for consumers.
Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
__request_region() sets 'flags' of a new resource from @parent
as it inherits the parent's attribute. When a target resource
has a conflict, this function inserts the new resource entry
under the conflicted entry by updating @parent. In this case,
the new resource entry needs to inherit attribute from the updated
parent. This conflict is a typical case since __request_region()
is used to allocate a new resource from a specific resource range.
For instance, request_mem_region() calls __request_region() with
@parent set to &iomem_resource, which is the root entry of the
whole iomem range. When this request results in inserting a new
entry "DEV-A" under "BUS-1", "DEV-A" needs to inherit from the
immediate parent "BUS-1" as it holds specific attribute for the
range.
root (&iomem_resource)
:
+ "BUS-1"
+ "DEV-A"
Change __request_region() to set 'flags' and 'desc' of a new entry
from the immediate parent.
Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
In __request_region, if a conflict with a BUSY and MUXED resource is
detected, then the caller goes to sleep and waits for the resource to be
released. A pointer on the conflicting resource is kept. At wake-up
this pointer is used as a parent to retry to request the region.
A first problem is that this pointer might well be invalid (if for
example the conflicting resource have already been freed). Another
problem is that the next call to __request_region() fails to detect a
remaining conflict. The previously conflicting resource is passed as a
parameter and __request_region() will look for a conflict among the
children of this resource and not at the resource itself. It is likely
to succeed anyway, even if there is still a conflict.
Instead, the parent of the conflicting resource should be passed to
__request_region().
As a fix, this patch doesn't update the parent resource pointer in the
case we have to wait for a muxed region right after.
Reported-and-tested-by: Vincent Pelletier <plr.vincent@gmail.com>
Signed-off-by: Simon Guinot <simon.guinot@sequanux.org>
Tested-by: Vincent Donnefort <vdonnefort@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
walk_iomem_res_desc() replaced walk_iomem_res() and there is no
caller to walk_iomem_res() any more. Kill it. Also remove @name
from find_next_iomem_res() as it is no longer used.
Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Dave Young <dyoung@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Hanjun Guo <hanjun.guo@linaro.org>
Cc: Jakub Sitnicki <jsitnicki@gmail.com>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Toshi Kani <toshi.kani@hp.com>
Cc: Vinod Koul <vinod.koul@intel.com>
Cc: linux-arch@vger.kernel.org
Cc: linux-mm <linux-mm@kvack.org>
Link: http://lkml.kernel.org/r/1453841853-11383-17-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Add a new interface, walk_iomem_res_desc(), which walks through
the iomem table by identifying a target with @flags and @desc.
This interface provides the same functionality as
walk_iomem_res(), but does not use strcmp() to @name for better
efficiency.
walk_iomem_res() is deprecated and will be removed in a later
patch.
Requested-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
[ Fixup comments. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Hanjun Guo <hanjun.guo@linaro.org>
Cc: Jakub Sitnicki <jsitnicki@gmail.com>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Toshi Kani <toshi.kani@hp.com>
Cc: linux-arch@vger.kernel.org
Cc: linux-mm <linux-mm@kvack.org>
Link: http://lkml.kernel.org/r/1453841853-11383-14-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Change region_intersects() to identify a target with @flags and
@desc, instead of @name with strcmp().
Change the callers of region_intersects(), memremap() and
devm_memremap(), to set IORESOURCE_SYSTEM_RAM in @flags and
IORES_DESC_NONE in @desc when searching System RAM.
Also, export region_intersects() so that the ACPI EINJ error
injection driver can call this function in a later patch.
Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jakub Sitnicki <jsitnicki@gmail.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Toshi Kani <toshi.kani@hp.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: linux-arch@vger.kernel.org
Cc: linux-mm <linux-mm@kvack.org>
Link: http://lkml.kernel.org/r/1453841853-11383-13-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Now that all System RAM resource entries have been initialized
to IORESOURCE_SYSTEM_RAM type, change walk_system_ram_res() and
walk_system_ram_range() to call find_next_iomem_res() by setting
@res.flags to IORESOURCE_SYSTEM_RAM and @name to NULL. With this
change, they walk through the iomem table to find System RAM
ranges without the need to do strcmp() on the resource names.
No functional change is made to the interfaces.
Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
[ Boris: fixup comments. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jakub Sitnicki <jsitnicki@gmail.com>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Toshi Kani <toshi.kani@hp.com>
Cc: linux-arch@vger.kernel.org
Cc: linux-mm <linux-mm@kvack.org>
Link: http://lkml.kernel.org/r/1453841853-11383-11-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
walk_iomem_res() and region_intersects() still need to use
strcmp() for searching a resource entry by @name in the iomem
table.
This patch introduces I/O resource descriptor 'desc' in struct
resource for the iomem search interfaces. Drivers can assign
their unique descriptor to a range when they support the search
interfaces.
Otherwise, 'desc' is set to IORES_DESC_NONE (0). This avoids
changing most of the drivers as they typically allocate resource
entries statically, or by calling alloc_resource(), kzalloc(),
or alloc_bootmem_low(), which set the field to zero by default.
A later patch will address some drivers that use kmalloc()
without zero'ing the field.
Also change release_mem_region_adjustable() to set 'desc' when
its resource entry gets separated. Other resource interfaces are
also changed to initialize 'desc' explicitly although
alloc_resource() sets it to 0.
Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jakub Sitnicki <jsitnicki@gmail.com>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Toshi Kani <toshi.kani@hp.com>
Cc: linux-arch@vger.kernel.org
Cc: linux-mm <linux-mm@kvack.org>
Link: http://lkml.kernel.org/r/1453841853-11383-4-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
I/O resource flags consist of I/O resource types and modifier
bits. Therefore, checking an I/O resource type in 'flags' must
be performed with a bitwise operation.
Fix find_next_iomem_res() and region_intersects() that simply
compare 'flags' against a given value.
Also change __request_region() to set 'res->flags' from
resource_type() and resource_ext_type() of the parent, so that
children nodes will inherit the extended I/O resource type.
Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jakub Sitnicki <jsitnicki@gmail.com>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Toshi Kani <toshi.kani@hp.com>
Cc: Vinod Koul <vinod.koul@intel.com>
Cc: linux-arch@vger.kernel.org
Cc: linux-mm <linux-mm@kvack.org>
Link: http://lkml.kernel.org/r/1453841853-11383-3-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
This effectively promotes IORESOURCE_BUSY to IORESOURCE_EXCLUSIVE
semantics by default. If userspace really believes it is safe to access
the memory region it can also perform the extra step of disabling an
active driver. This protects device address ranges with read side
effects and otherwise directs userspace to use the driver.
Persistent memory presents a large "mistake surface" to /dev/mem as now
accidental writes can corrupt a filesystem.
In general if a device driver is busily using a memory region it already
informs other parts of the kernel to not touch it via
request_mem_region(). /dev/mem should honor the same safety restriction
by default. Debugging a device driver from userspace becomes more
difficult with this enabled. Any application using /dev/mem or mmap of
sysfs pci resources will now need to perform the extra step of either:
1/ Disabling the driver, for example:
echo <device id> > /dev/bus/<parent bus>/drivers/<driver name>/unbind
2/ Rebooting with "iomem=relaxed" on the command line
3/ Recompiling with CONFIG_IO_STRICT_DEVMEM=n
Traditional users of /dev/mem like dosemu are unaffected because the
first 1MB of memory is not subject to the IO_STRICT_DEVMEM restriction.
Legacy X configurations use /dev/mem to talk to graphics hardware, but
that functionality has since moved to kernel graphics drivers.
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
region_is_ram() is used to prevent the establishment of aliased mappings
to physical "System RAM" with incompatible cache settings. However, it
uses "-1" to indicate both "unknown" memory ranges (ranges not described
by platform firmware) and "mixed" ranges (where the parameters describe
a range that partially overlaps "System RAM").
Fix this up by explicitly tracking the "unknown" vs "mixed" resource
cases and returning REGION_INTERSECTS, REGION_MIXED, or REGION_DISJOINT.
This re-write also adds support for detecting when the requested region
completely eclipses all of a resource. Note, the implementation treats
overlaps between "unknown" and the requested memory type as
REGION_INTERSECTS.
Finally, other memory types can be passed in by name, for now the only
usage "System RAM".
Suggested-by: Luis R. Rodriguez <mcgrof@suse.com>
Reviewed-by: Toshi Kani <toshi.kani@hp.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
region_is_ram() looks up the iomem_resource table to check if
a target range is in RAM. However, it always returns with -1
due to invalid range checks. It always breaks the loop at the
first entry of the table.
Another issue is that it compares p->flags and flags, but it always
fails. flags is declared as int, which makes it as a negative value
with IORESOURCE_BUSY (0x80000000) set while p->flags is unsigned long.
Fix the range check and flags so that region_is_ram() works as
advertised.
Signed-off-by: Toshi Kani <toshi.kani@hp.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Cc: Mike Travis <travis@sgi.com>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Roland Dreier <roland@purestorage.com>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/1437088996-28511-4-git-send-email-toshi.kani@hp.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
All users of __check_region(), check_region(), and check_mem_region() are
gone. We got rid of the last user in v4.0-rc1. Remove them.
bloat-o-meter on x86_64 shows:
add/remove: 0/3 grow/shrink: 0/0 up/down: 0/-102 (-102)
function old new delta
__kstrtab___check_region 15 - -15
__ksymtab___check_region 16 - -16
__check_region 71 - -71
Signed-off-by: Jakub Sitnicki <jsitnicki@gmail.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Currently ACPI, PCI and pnp all implement the same resource list
management with different data structure. We need to transfer from
one data structure into another when passing resources from one
subsystem into another subsystem. So move struct resource_list_entry
from ACPI into resource core and rename it as resource_entry,
then it could be reused by different subystems and avoid the data
structure conversion.
Introduce dedicated header file resource_ext.h instead of embedding
it into ioport.h to avoid header file inclusion order issues.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
We have a large university system in the UK that is experiencing very long
delays modprobing the driver for a specific I/O device. The delay is from
8-10 minutes per device and there are 31 devices in the system. This 4 to
5 hour delay in starting up those I/O devices is very much a burden on the
customer.
There are two causes for requiring a restart/reload of the drivers. First
is periodic preventive maintenance (PM) and the second is if any of the
devices experience a fatal error. Both of these trigger this excessively
long delay in bringing the system back up to full capability.
The problem was tracked down to a very slow IOREMAP operation and the
excessively long ioresource lookup to insure that the user is not
attempting to ioremap RAM. These patches provide a speed up to that
function.
The modprobe time appears to be affected quite a bit by previous activity
on the ioresource list, which I suspect is due to cache preloading. While
the overall improvement is impacted by other overhead of starting the
devices, this drastically improves the modprobe time.
Also our system is considerably smaller so the percentages gained will not
be the same. Best case improvement with the modprobe on our 20 device
smallish system was from 'real 5m51.913s' to 'real 0m18.275s'.
This patch (of 2):
Since the ioremap operation is verifying that the specified address range
is NOT RAM, it will search the entire ioresource list if the condition is
true. To make matters worse, it does this one 4k page at a time. For a
128M BAR region this is 32 passes to determine the entire region does not
contain any RAM addresses.
This patch provides another resource lookup function, region_is_ram, that
searches for the entire region specified, verifying that it is completely
contained within the resource region. If it is found, then it is checked
to be RAM or not, within a single pass.
The return result reflects if it was found or not (-1), and whether it is
RAM (1) or not (0). This allows the caller to fallback to the previous
page by page search if it was not found.
[akpm@linux-foundation.org: fix spellos and typos in comment]
Signed-off-by: Mike Travis <travis@sgi.com>
Acked-by: Alex Thorlton <athorlton@sgi.com>
Reviewed-by: Cliff Wickman <cpw@sgi.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
"The interesting things here are:
- Turn on Config Request Retry Status Software Visibility. This
caused hangs last time, but we included a fix this time.
- Rework PCI device configuration to use _HPP/_HPX more aggressively
- Allow PCI devices to be put into D3cold during system suspend
- Add arm64 PCI support
- Add APM X-Gene host bridge driver
- Add TI Keystone host bridge driver
- Add Xilinx AXI host bridge driver
More detailed summary:
Enumeration
- Check Vendor ID only for Config Request Retry Status (Rajat Jain)
- Enable Config Request Retry Status when supported (Rajat Jain)
- Add generic domain handling (Catalin Marinas)
- Generate uppercase hex for modalias interface class (Ricardo Ribalda Delgado)
Resource management
- Add missing MEM_64 mask in pci_assign_unassigned_bridge_resources() (Yinghai Lu)
- Increase IBM ipr SAS Crocodile BARs to at least system page size (Douglas Lehr)
PCI device hotplug
- Prevent NULL dereference during pciehp probe (Andreas Noever)
- Move _HPP & _HPX handling into core (Bjorn Helgaas)
- Apply _HPP to PCIe devices as well as PCI (Bjorn Helgaas)
- Apply _HPP/_HPX to display devices (Bjorn Helgaas)
- Preserve SERR & PARITY settings when applying _HPP/_HPX (Bjorn Helgaas)
- Preserve MPS and MRRS settings when applying _HPP/_HPX (Bjorn Helgaas)
- Apply _HPP/_HPX to all devices, not just hot-added ones (Bjorn Helgaas)
- Fix wait time in pciehp timeout message (Yinghai Lu)
- Add more pciehp Slot Control debug output (Yinghai Lu)
- Stop disabling pciehp notifications during init (Yinghai Lu)
MSI
- Remove arch_msi_check_device() (Alexander Gordeev)
- Rename pci_msi_check_device() to pci_msi_supported() (Alexander Gordeev)
- Move D0 check into pci_msi_check_device() (Alexander Gordeev)
- Remove unused kobject from struct msi_desc (Yijing Wang)
- Remove "pos" from the struct msi_desc msi_attrib (Yijing Wang)
- Add "msi_bus" sysfs MSI/MSI-X control for endpoints (Yijing Wang)
- Use __get_cached_msi_msg() instead of get_cached_msi_msg() (Yijing Wang)
- Use __read_msi_msg() instead of read_msi_msg() (Yijing Wang)
- Use __write_msi_msg() instead of write_msi_msg() (Yijing Wang)
Power management
- Drop unused runtime PM support code for PCIe ports (Rafael J. Wysocki)
- Allow PCI devices to be put into D3cold during system suspend (Rafael J. Wysocki)
AER
- Add additional AER error strings (Gong Chen)
- Make <linux/aer.h> standalone includable (Thierry Reding)
Virtualization
- Add ACS quirk for Solarflare SFC9120 & SFC9140 (Alex Williamson)
- Add ACS quirk for Intel 10G NICs (Alex Williamson)
- Add ACS quirk for AMD A88X southbridge (Marti Raudsepp)
- Remove unused pci_find_upstream_pcie_bridge(), pci_get_dma_source() (Alex Williamson)
- Add device flag helpers (Ethan Zhao)
- Assume all Mellanox devices have broken INTx masking (Gavin Shan)
Generic host bridge driver
- Fix ioport_map() for !CONFIG_GENERIC_IOMAP (Liviu Dudau)
- Add pci_register_io_range() and pci_pio_to_address() (Liviu Dudau)
- Define PCI_IOBASE as the base of virtual PCI IO space (Liviu Dudau)
- Fix the conversion of IO ranges into IO resources (Liviu Dudau)
- Add pci_get_new_domain_nr() and of_get_pci_domain_nr() (Liviu Dudau)
- Add support for parsing PCI host bridge resources from DT (Liviu Dudau)
- Add pci_remap_iospace() to map bus I/O resources (Liviu Dudau)
- Add arm64 architectural support for PCI (Liviu Dudau)
APM X-Gene
- Add APM X-Gene PCIe driver (Tanmay Inamdar)
- Add arm64 DT APM X-Gene PCIe device tree nodes (Tanmay Inamdar)
Freescale i.MX6
- Probe in module_init(), not fs_initcall() (Lucas Stach)
- Delay enabling reference clock for SS until it stabilizes (Tim Harvey)
Marvell MVEBU
- Fix uninitialized variable in mvebu_get_tgt_attr() (Thomas Petazzoni)
NVIDIA Tegra
- Make sure the PCIe PLL is really reset (Eric Yuen)
- Add error path tegra_msi_teardown_irq() cleanup (Jisheng Zhang)
- Fix extended configuration space mapping (Peter Daifuku)
- Implement resource hierarchy (Thierry Reding)
- Clear CLKREQ# enable on port disable (Thierry Reding)
- Add Tegra124 support (Thierry Reding)
ST Microelectronics SPEAr13xx
- Pass config resource through reg property (Pratyush Anand)
Synopsys DesignWare
- Use NULL instead of false (Fabio Estevam)
- Parse bus-range property from devicetree (Lucas Stach)
- Use pci_create_root_bus() instead of pci_scan_root_bus() (Lucas Stach)
- Remove pci_assign_unassigned_resources() (Lucas Stach)
- Check private_data validity in single place (Lucas Stach)
- Setup and clear exactly one MSI at a time (Lucas Stach)
- Remove open-coded bitmap operations (Lucas Stach)
- Fix configuration base address when using 'reg' (Minghuan Lian)
- Fix IO resource end address calculation (Minghuan Lian)
- Rename get_msi_data() to get_msi_addr() (Minghuan Lian)
- Add get_msi_data() to pcie_host_ops (Minghuan Lian)
- Add support for v3.65 hardware (Murali Karicheri)
- Fold struct pcie_port_info into struct pcie_port (Pratyush Anand)
TI Keystone
- Add TI Keystone PCIe driver (Murali Karicheri)
- Limit MRSS for all downstream devices (Murali Karicheri)
- Assume controller is already in RC mode (Murali Karicheri)
- Set device ID based on SoC to support multiple ports (Murali Karicheri)
Xilinx AXI
- Add Xilinx AXI PCIe driver (Srikanth Thokala)
- Fix xilinx_pcie_assign_msi() return value test (Dan Carpenter)
Miscellaneous
- Clean up whitespace (Quentin Lambert)
- Remove assignments from "if" conditions (Quentin Lambert)
- Move PCI_VENDOR_ID_VMWARE to pci_ids.h (Francesco Ruggeri)
- x86: Mark DMI tables as initialization data (Mathias Krause)
- x86: Move __init annotation to the correct place (Mathias Krause)
- x86: Mark constants of pci_mmcfg_nvidia_mcp55() as __initconst (Mathias Krause)
- x86: Constify pci_mmcfg_probes[] array (Mathias Krause)
- x86: Mark PCI BIOS initialization code as such (Mathias Krause)
- Parenthesize PCI_DEVID and PCI_VPD_LRDT_ID parameters (Megan Kamiya)
- Remove unnecessary variable in pci_add_dynid() (Tobias Klauser)"
* tag 'pci-v3.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (109 commits)
arm64: dts: Add APM X-Gene PCIe device tree nodes
PCI: Add ACS quirk for AMD A88X southbridge devices
PCI: xgene: Add APM X-Gene PCIe driver
PCI: designware: Remove open-coded bitmap operations
PCI/MSI: Remove unnecessary temporary variable
PCI/MSI: Use __write_msi_msg() instead of write_msi_msg()
MSI/powerpc: Use __read_msi_msg() instead of read_msi_msg()
PCI/MSI: Use __get_cached_msi_msg() instead of get_cached_msi_msg()
PCI/MSI: Add "msi_bus" sysfs MSI/MSI-X control for endpoints
PCI/MSI: Remove "pos" from the struct msi_desc msi_attrib
PCI/MSI: Remove unused kobject from struct msi_desc
PCI/MSI: Rename pci_msi_check_device() to pci_msi_supported()
PCI/MSI: Move D0 check into pci_msi_check_device()
PCI/MSI: Remove arch_msi_check_device()
irqchip: armada-370-xp: Remove arch_msi_check_device()
PCI/MSI/PPC: Remove arch_msi_check_device()
arm64: Add architectural support for PCI
PCI: Add pci_remap_iospace() to map bus I/O resources
of/pci: Add support for parsing PCI host bridge resources from DT
of/pci: Add pci_get_new_domain_nr() and of_get_pci_domain_nr()
...
Conflicts:
arch/arm64/boot/dts/apm-storm.dtsi
|
|
Provide device-managed implementations of the request_resource() and
release_resource() functions. Upon failure to request a resource, the new
devm_request_resource() function will output an error message for
consistent error reporting.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Tejun Heo <tj@kernel.org>
|
|
Richard and Daniel reported that UML is broken due to changes to
resource traversal functions. Problem is that iomem_resource.child can
be null and new code does not consider that possibility. Old code used
a for loop and that loop will not even execute if p was null.
Revert back to for() loop logic and bail out if p is null.
I also moved sibling_only check out of resource_lock. There is no
reason to keep it inside the lock.
Following is backtrace of the UML crash.
RIP: 0033:[<0000000060039b9f>]
RSP: 0000000081459da0 EFLAGS: 00010202
RAX: 0000000000000000 RBX: 00000000219b3fff RCX: 000000006010d1d9
RDX: 0000000000000001 RSI: 00000000602dfb94 RDI: 0000000081459df8
RBP: 0000000081459de0 R08: 00000000601b59f4 R09: ffffffff0000ff00
R10: ffffffff0000ff00 R11: 0000000081459e88 R12: 0000000081459df8
R13: 00000000219b3fff R14: 00000000602dfb94 R15: 0000000000000000
Kernel panic - not syncing: Segfault with no mm
CPU: 0 PID: 1 Comm: swapper Not tainted 3.16.0-10454-g58d08e3 #13
Stack:
00000000 000080d0 81459df0 219b3fff
81459e70 6010d1d9 ffffffff 6033e010
81459e50 6003a269 81459e30 00000000
Call Trace:
[<6010d1d9>] ? kclist_add_private+0x0/0xe7
[<6003a269>] walk_system_ram_range+0x61/0xb7
[<6000e859>] ? proc_kcore_init+0x0/0xf1
[<6010d574>] kcore_update_ram+0x4c/0x168
[<6010d72e>] ? kclist_add+0x0/0x2e
[<6000e943>] proc_kcore_init+0xea/0xf1
[<6000e859>] ? proc_kcore_init+0x0/0xf1
[<6000e859>] ? proc_kcore_init+0x0/0xf1
[<600189f0>] do_one_initcall+0x13c/0x204
[<6004ca46>] ? parse_args+0x1df/0x2e0
[<6004c82d>] ? parameq+0x0/0x3a
[<601b5990>] ? strcpy+0x0/0x18
[<60001e1a>] kernel_init_freeable+0x240/0x31e
[<6026f1c0>] kernel_init+0x12/0x148
[<60019fad>] new_thread_handler+0x81/0xa3
Fixes 8c86e70acead629aacb4a ("resource: provide new functions to walk
through resources").
Reported-by: Daniel Walter <sahne@0x90.at>
Tested-by: Richard Weinberger <richard@nod.at>
Tested-by: Toralf Förster <toralf.foerster@gmx.de>
Tested-by: Daniel Walter <sahne@0x90.at>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
I have added two more functions to walk through resources.
Currently walk_system_ram_range() deals with pfn and /proc/iomem can
contain partial pages. By dealing in pfn, callback function loses the
info that last page of a memory range is a partial page and not the full
page. So I implemented walk_system_ram_res() which returns u64 values to
callback functions and now it properly return start and end address.
walk_system_ram_range() uses find_next_system_ram() to find the next ram
resource. This in turn only travels through siblings of top level child
and does not travers through all the nodes of the resoruce tree. I also
need another function where I can walk through all the resources, for
example figure out where "GART" aperture is. Figure out where ACPI memory
is.
So I wrote another function walk_iomem_res() which walks through all
/proc/iomem resources and returns matches as asked by caller. Caller can
specify "name" of resource, start and end and flags.
Got rid of find_next_system_ram_res() and instead implemented more generic
find_next_iomem_res() which can be used to traverse top level children
only based on an argument.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Greg Kroah-Hartman <greg@kroah.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: WANG Chao <chaowang@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The resource map sanity check message is a bit confusing. Change it to be
more readable:
-resource map sanity check conflict: 0xfed10000 0xfed15fff 0xfed10000 0xfed13fff pnp 00:01
+resource sanity check: requesting [mem 0xfed10000-0xfed15fff], which spans more than pnp 00:01 [mem 0xfed10000-0xfed13fff]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
sparse says:
kernel/resource.c:518:5: warning:
symbol 'reallocate_resource' was not declared. Should it be static?
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Reviewed-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
We don't set the type (I/O, memory, etc.) of resources added by
__request_region(), which leads to confusing messages like this:
address space collision: [io 0x1000-0x107f] conflicts with ACPI CPU throttle [??? 0x00001010-0x00001015 flags 0x80000000]
Set the type of a new resource added by __request_region() (used by
request_region() and request_mem_region()) to the type of its parent. This
makes the resource tree internally consistent and fixes messages like the
above, where the ACPI CPU throttle resource really is an I/O port region,
but request_region() didn't fill in the type, so %pR didn't know how to
print it.
Sample dmesg showing the issue at the link below.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=71611
Reported-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
We have two identical copies of resource_contains() already, and more
places that could use it. This moves it to ioport.h where it can be
shared.
resource_contains(struct resource *r1, struct resource *r2) returns true
iff r1 and r2 are the same type (most callers already checked this
separately) and the r1 address range completely contains r2.
In addition, the new resource_contains() checks that both r1 and r2 have
addresses assigned to them. If a resource is IORESOURCE_UNSET, it doesn't
have a valid address and can't contain or be contained by another resource.
Some callers already check this or for res->start.
No functional change.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
This line was introduced by fcb11918 ("resources: add arch hook for
preventing allocation in reserved areas"). But the struct tmp was already
assigned to *new in the above line, so this seems superfluous. Just
remove it.
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When param1 is enabled in EINJ but not assigned with a valid
value, sometimes it will cause the error like below:
APEI: Can not request [mem 0x7aaa7000-0x7aaa7007] for APEI EINJ Trigger registers
It is because some firmware will access target address specified in
param1 to trigger the error when injecting memory error. This will
cause resource conflict with regular memory. So It must be removed
from trigger table resources, but incorrect param1/param2
combination will stop this action. Add extra check to avoid
this kind of error.
Signed-off-by: Chen Gong <gong.chen@linux.intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
|
|
When hot removing memory presented at boot time, following messages are shown:
kernel BUG at mm/slub.c:3409!
invalid opcode: 0000 [#1] SMP
Modules linked in: ebtable_nat ebtables xt_CHECKSUM iptable_mangle bridge stp llc ipmi_devintf ipmi_msghandler sunrpc ipt_REJECT nf_conntrack_ipv4 nf_defrag_ipv4 iptable_filter ip_tables ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables binfmt_misc vfat fat dm_mirror dm_region_hash dm_log dm_mod vhost_net macvtap macvlan tun uinput iTCO_wdt iTCO_vendor_support coretemp kvm_intel kvm crc32c_intel ghash_clmulni_intel microcode pcspkr sg i2c_i801 lpc_ich mfd_core igb i2c_algo_bit i2c_core e1000e ptp pps_core tpm_infineon ioatdma dca sr_mod cdrom sd_mod crc_t10dif usb_storage megaraid_sas lpfc scsi_transport_fc scsi_tgt scsi_mod
CPU 0
Pid: 5091, comm: kworker/0:2 Tainted: G W 3.9.0-rc6+ #15
RIP: kfree+0x232/0x240
Process kworker/0:2 (pid: 5091, threadinfo ffff88084678c000, task ffff88083928ca80)
Call Trace:
__release_region+0xd4/0xe0
__remove_pages+0x52/0x110
arch_remove_memory+0x89/0xd0
remove_memory+0xc4/0x100
acpi_memory_device_remove+0x6d/0xb1
acpi_device_remove+0x89/0xab
__device_release_driver+0x7c/0xf0
device_release_driver+0x2f/0x50
acpi_bus_device_detach+0x6c/0x70
acpi_ns_walk_namespace+0x11a/0x250
acpi_walk_namespace+0xee/0x137
acpi_bus_trim+0x33/0x7a
acpi_bus_hot_remove_device+0xc4/0x1a1
acpi_os_execute_deferred+0x27/0x34
process_one_work+0x1f7/0x590
worker_thread+0x11a/0x370
kthread+0xee/0x100
ret_from_fork+0x7c/0xb0
RIP [<ffffffff811c41d2>] kfree+0x232/0x240
RSP <ffff88084678d968>
The reason why the messages are shown is to release a resource
structure, allocated by bootmem, by kfree(). So when we release a
resource structure, we should check whether it is allocated by bootmem
or not.
But even if we know a resource structure is allocated by bootmem, we
cannot release it since SLxB cannot treat it. So for reusing a resource
structure, this patch remembers it by using bootmem_resource as follows:
When releasing a resource structure by free_resource(), free_resource()
checks whether the resource structure is allocated by bootmem or not.
If it is allocated by bootmem, free_resource() adds it to
bootmem_resource. If it is not allocated by bootmem, free_resource()
release it by kfree().
And when getting a new resource structure by get_resource(),
get_resource() checks whether bootmem_resource has released resource
structures or not. If there is a released resource structure,
get_resource() returns it. If there is not a releaed resource
structure, get_resource() returns new resource structure allocated by
kzalloc().
[akpm@linux-foundation.org: s/get_resource/alloc_resource/]
Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Reviewed-by: Toshi Kani <toshi.kani@hp.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Ram Pai <linuxram@us.ibm.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add release_mem_region_adjustable(), which releases a requested region
from a currently busy memory resource. This interface adjusts the
matched memory resource accordingly even if the requested region does
not match exactly but still fits into.
This new interface is intended for memory hot-delete. During bootup,
memory resources are inserted from the boot descriptor table, such as
EFI Memory Table and e820. Each memory resource entry usually covers
the whole contigous memory range. Memory hot-delete request, on the
other hand, may target to a particular range of memory resource, and its
size can be much smaller than the whole contiguous memory. Since the
existing release interfaces like __release_region() require a requested
region to be exactly matched to a resource entry, they do not allow a
partial resource to be released.
This new interface is restrictive (i.e. release under certain
conditions), which is consistent with other release interfaces,
__release_region() and __release_resource(). Additional release
conditions, such as an overlapping region to a resource entry, can be
supported after they are confirmed as valid cases.
There is no change to the existing interfaces since their restriction is
valid for I/O resources.
[akpm@linux-foundation.org: use GFP_ATOMIC under write_lock()]
[akpm@linux-foundation.org: switch back to GFP_KERNEL, less buggily]
[akpm@linux-foundation.org: remove unneeded and wrong kfree(), per Toshi]
Signed-off-by: Toshi Kani <toshi.kani@hp.com>
Reviewed-by : Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Reviewed-by: Ram Pai <linuxram@us.ibm.com>
Cc: T Makphaibulchoke <tmac@hp.com>
Cc: Wen Congyang <wency@cn.fujitsu.com>
Cc: Tang Chen <tangchen@cn.fujitsu.com>
Cc: Jiang Liu <jiang.liu@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add __adjust_resource(), which is called by adjust_resource() internally
after the resource_lock is held. There is no interface change to
adjust_resource(). This change allows other functions to call
__adjust_resource() internally while the resource_lock is held.
Signed-off-by: Toshi Kani <toshi.kani@hp.com>
Reviewed-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Ram Pai <linuxram@us.ibm.com>
Cc: T Makphaibulchoke <tmac@hp.com>
Cc: Wen Congyang <wency@cn.fujitsu.com>
Cc: Tang Chen <tangchen@cn.fujitsu.com>
Cc: Jiang Liu <jiang.liu@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Using a recursive call add a non-conflicting region in
__reserve_region_with_split() could result in a stack overflow in the case
that the recursive calls are too deep. Convert the recursive calls to an
iterative loop to avoid the problem.
Tested on a machine containing 135 regions. The kernel no longer panicked
with stack overflow.
Also tested with code arbitrarily adding regions with no conflict,
embedding two consecutive conflicts and embedding two non-consecutive
conflicts.
Signed-off-by: T Makphaibulchoke <tmac@hp.com>
Reviewed-by: Ram Pai <linuxram@us.ibm.com>
Cc: Paul Gortmaker <paul.gortmaker@gmail.com>
Cc: Wei Yang <weiyang@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When the requested range is outside of the root range the logic in
__reserve_region_with_split will cause an infinite recursion which will
overflow the stack as seen in the warning bellow.
This particular stack overflow was caused by requesting the
(100000000-107ffffff) range while the root range was (0-ffffffff). In
this case __request_resource would return the whole root range as
conflict range (i.e. 0-ffffffff). Then, the logic in
__reserve_region_with_split would continue the recursion requesting the
new range as (conflict->end+1, end) which incidentally in this case
equals the originally requested range.
This patch aborts looking for an usable range when the request does not
intersect with the root range. When the request partially overlaps with
the root range, it ajust the request to fall in the root range and then
continues with the new request.
When the request is modified or aborted errors and a stack trace are
logged to allow catching the errors in the upper layers.
[ 5.968374] WARNING: at kernel/sched.c:4129 sub_preempt_count+0x63/0x89()
[ 5.975150] Modules linked in:
[ 5.978184] Pid: 1, comm: swapper Not tainted 3.0.22-mid27-00004-gb72c817 #46
[ 5.985324] Call Trace:
[ 5.987759] [<c1039dfc>] ? console_unlock+0x17b/0x18d
[ 5.992891] [<c1039620>] warn_slowpath_common+0x48/0x5d
[ 5.998194] [<c1031758>] ? sub_preempt_count+0x63/0x89
[ 6.003412] [<c1039644>] warn_slowpath_null+0xf/0x13
[ 6.008453] [<c1031758>] sub_preempt_count+0x63/0x89
[ 6.013499] [<c14d60c4>] _raw_spin_unlock+0x27/0x3f
[ 6.018453] [<c10c6349>] add_partial+0x36/0x3b
[ 6.022973] [<c10c7c0a>] deactivate_slab+0x96/0xb4
[ 6.027842] [<c14cf9d9>] __slab_alloc.isra.54.constprop.63+0x204/0x241
[ 6.034456] [<c103f78f>] ? kzalloc.constprop.5+0x29/0x38
[ 6.039842] [<c103f78f>] ? kzalloc.constprop.5+0x29/0x38
[ 6.045232] [<c10c7dc9>] kmem_cache_alloc_trace+0x51/0xb0
[ 6.050710] [<c103f78f>] ? kzalloc.constprop.5+0x29/0x38
[ 6.056100] [<c103f78f>] kzalloc.constprop.5+0x29/0x38
[ 6.061320] [<c17b45e9>] __reserve_region_with_split+0x1c/0xd1
[ 6.067230] [<c17b4693>] __reserve_region_with_split+0xc6/0xd1
...
[ 7.179057] [<c17b4693>] __reserve_region_with_split+0xc6/0xd1
[ 7.184970] [<c17b4779>] reserve_region_with_split+0x30/0x42
[ 7.190709] [<c17a8ebf>] e820_reserve_resources_late+0xd1/0xe9
[ 7.196623] [<c17c9526>] pcibios_resource_survey+0x23/0x2a
[ 7.202184] [<c17cad8a>] pcibios_init+0x23/0x35
[ 7.206789] [<c17ca574>] pci_subsys_init+0x3f/0x44
[ 7.211659] [<c1002088>] do_one_initcall+0x72/0x122
[ 7.216615] [<c17ca535>] ? pci_legacy_init+0x3d/0x3d
[ 7.221659] [<c17a27ff>] kernel_init+0xa6/0x118
[ 7.226265] [<c17a2759>] ? start_kernel+0x334/0x334
[ 7.231223] [<c14d7482>] kernel_thread_helper+0x6/0x10
Signed-off-by: Octavian Purdila <octavian.purdila@intel.com>
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
If a resource has no parent, allow its start/end to be set arbitrarily
as long as any children are still contained within the new range.
[bhelgaas: changelog]
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
In the comment of allocate_resource(), the explanation of parameter max
and min is not correct.
Actually, these two parameters are used to specify the range of the
resource that will be allocated, not the min/max size that will be
allocated.
Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
EXPORT_SYMBOL(adjust_resource) should be right after adjust_resource().
Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
The changed files were only including linux/module.h for the
EXPORT_SYMBOL infrastructure, and nothing else. Revector them
onto the isolated export header for faster compile times.
Nothing to see here but a whole lot of instances of:
-#include <linux/module.h>
+#include <linux/export.h>
This commit is only changing the kernel dir; next targets
will probably be mm, fs, the arch dirs, etc.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
__find_resource() incorrectly returns a resource window which overlaps
an existing allocated window. This happens when the parent's
resource-window spans 0x00000000 to 0xffffffff and is entirely allocated
to all its children resource-windows.
__find_resource() looks for gaps in resource allocation among the
children resource windows. When it encounters the last child window it
blindly tries the range next to one allocated to the last child. Since
the last child's window ends at 0xffffffff the calculation overflows,
leading the algorithm to believe that any window in the range 0x0000000
to 0xfffffff is available for allocation. This leads to a conflicting
window allocation.
Michal Ludvig reported this issue seen on his platform. The following
patch fixes the problem and has been verified by Michal. I believe this
bug has been there for ages. It got exposed by git commit 2bbc6942273b
("PCI : ability to relocate assigned pci-resources")
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Tested-by: Michal Ludvig <mludvig@logix.net.nz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add a function to find an existing resource by a resource start address.
This allows to implement simple allocators (with a malloc/free-alike API)
on top of the resource system.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
|
Provides the ability to resize a resource that is already allocated.
This functionality is put in place to support reallocation needs of
pci resources.
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This adds arch_remove_reservations(), which an arch can implement if it
needs to protect part of the address space from allocation.
Sometimes that can be done by just putting a region in the resource tree,
but there are cases where that doesn't work well. For example, x86 BIOS
E820 reservations are not related to devices, so they may overlap part of,
all of, or more than a device resource, so they may not end up at the
correct spot in the resource tree.
Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
|
|
This reverts commit e7f8567db9a7f6b3151b0b275e245c1cef0d9c70.
Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6
* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (27 commits)
x86: allocate space within a region top-down
x86: update iomem_resource end based on CPU physical address capabilities
x86/PCI: allocate space from the end of a region, not the beginning
PCI: allocate bus resources from the top down
resources: support allocating space within a region from the top down
resources: handle overflow when aligning start of available area
resources: ensure callback doesn't allocate outside available space
resources: factor out resource_clip() to simplify find_resource()
resources: add a default alignf to simplify find_resource()
x86/PCI: MMCONFIG: fix region end calculation
PCI: Add support for polling PME state on suspended legacy PCI devices
PCI: Export some PCI PM functionality
PCI: fix message typo
PCI: log vendor/device ID always
PCI: update Intel chipset names and defines
PCI: use new ccflags variable in Makefile
PCI: add PCI_MSIX_TABLE/PBA defines
PCI: add PCI vendor id for STmicroelectronics
x86/PCI: irq and pci_ids patch for Intel Patsburg DeviceIDs
PCI: OLPC: Only enable PCI configuration type override on XO-1
...
|
|
If the same resource is inserted to the resource tree (maybe not on
purpose), a dead loop will be created. In this situation, The kernel does
not report any warning or error :(
The command below will show a endless print.
#cat /proc/iomem
[akpm@linux-foundation.org: add WARN_ON()]
Signed-off-by: Huang Shijie <shijie8@gmail.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Allocate space from the top of a region first, then work downward,
if an architecture desires this.
When we allocate space from a resource, we look for gaps between children
of the resource. Previously, we always looked at gaps from the bottom up.
For example, given this:
[mem 0xbff00000-0xf7ffffff] PCI Bus 0000:00
[mem 0xbff00000-0xbfffffff] gap -- available
[mem 0xc0000000-0xdfffffff] PCI Bus 0000:02
[mem 0xe0000000-0xf7ffffff] gap -- available
we attempted to allocate from the [mem 0xbff00000-0xbfffffff] gap first,
then the [mem 0xe0000000-0xf7ffffff] gap.
With this patch an architecture can choose to allocate from the top gap
[mem 0xe0000000-0xf7ffffff] first.
We can't do this across the board because iomem_resource.end is initialized
to 0xffffffff_ffffffff on 64-bit architectures, and most machines can't
address the entire 64-bit physical address space. Therefore, we only
allocate top-down if the arch requests it by clearing
"resource_alloc_from_bottom".
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
|
|
If tmp.start is near ~0, ALIGN(tmp.start) may overflow, which would
make us think there's more available space than there really is. We
would likely return something that conflicts with a previous resource,
which would cause a failure when allocate_resource() requests the newly-
allocated region.
Reference: https://bugzilla.redhat.com/show_bug.cgi?id=646027
Reported-by: Fabrice Bellet <fabrice@bellet.info>
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
|
|
The alignment callback returns a proposed location, which may have been
adjusted to avoid ISA aliases or for other architecture-specific reasons.
We already had a check ("tmp.start < tmp.end") to make sure the callback
doesn't return an area that extends past the available area. This patch
reworks the check to make sure it doesn't return an area that extends
either below or above the available area.
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
|
|
This factors out the min/max clipping to simplify find_resource().
No functional change.
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
|
|
This removes a test from find_resource(), which is getting cluttered.
No functional change.
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
|
|
SuperIO devices share regions and use lock/unlock operations to chip
select. We therefore need to be able to request a resource and wait for
it to be freed by whichever other SuperIO device currently hogs it.
Right now you have to poll which is horrible.
Add a MUXED field to IO port resources. If the MUXED field is set on the
resource and on the request (via request_muxed_region) then we block
until the previous owner of the muxed resource releases their region.
This allows us to implement proper resource sharing and locking for
superio chips using code of the form
enable_my_superio_dev() {
request_muxed_region(0x44, 0x02, "superio:watchdog");
outb() ..sequence to enable chip
}
disable_my_superio_dev() {
outb() .. sequence of disable chip
release_region(0x44, 0x02);
}
Signed-off-by: Giel van Schijndel <me@mortis.eu>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
|
|
request_resource() and insert_resource() only return success or failure,
which no information about what existing resource conflicted with the
proposed new reservation. This patch adds request_resource_conflict()
and insert_resource_conflict(), which return the conflicting resource.
Callers may use this for better error messages or to adjust the new
resource and retry the request.
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
|
