| Age | Commit message (Collapse) | Author |
|---|
|
These callbacks are only called in the syscore suspend/resume code on
interrupt chips which have been registered via the generic irq chip
mechanism. Calling those callbacks per irq would be rather icky, but
with the generic irq chip mechanism we can call this per registered
chip.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arm-kernel@lists.infradead.org
|
|
Implement a generic interrupt chip, which is configurable and is able
to handle the most common irq chip implementations.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arm-kernel@lists.infradead.org
Tested-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by; Kevin Hilman <khilman@ti.com>
|
|
This adds support for disabling threading on a per-IRQ basis via the IRQ
status instead of the IRQ flow, which is necessary for interrupts that
don't follow the natural IRQ flow channels, such as those that are
virtually created.
The new APIs added are simply:
irq_set_thread()
irq_set_nothread()
which follow the rest of the IRQ status routines.
Chained handlers also have IRQ_NOTHREAD set on them automatically, making
the lack of threading explicit rather than implicit. Subsequently, the
nothread flag can be viewed through the standard genirq debugging
facilities.
[ tglx: Fixed cleanup fallout ]
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Link: http://lkml.kernel.org/r/%3C20110406210135.GF18426%40linux-sh.org%3E
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
next_pidmap() just quietly accepted whatever 'last' pid that was passed
in, which is not all that safe when one of the users is /proc.
Admittedly the proc code should do some sanity checking on the range
(and that will be the next commit), but that doesn't mean that the
helper functions should just do that pidmap pointer arithmetic without
checking the range of its arguments.
So clamp 'last' to PID_MAX_LIMIT. The fact that we then do "last+1"
doesn't really matter, the for-loop does check against the end of the
pidmap array properly (it's only the actual pointer arithmetic overflow
case we need to worry about, and going one bit beyond isn't going to
overflow).
[ Use PID_MAX_LIMIT rather than pid_max as per Eric Biederman ]
Reported-by: Tavis Ormandy <taviso@cmpxchg8b.com>
Analyzed-by: Robert Święcki <robert@swiecki.net>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
block: make unplug timer trace event correspond to the schedule() unplug
block: let io_schedule() flush the plug inline
|
|
'sched-fixes-for-linus', 'timer-fixes-for-linus' and 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
futex: Set FLAGS_HAS_TIMEOUT during futex_wait restart setup
* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
perf_event: Fix cgrp event scheduling bug in perf_enable_on_exec()
perf: Fix a build error with some GCC versions
* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
sched: Fix erroneous all_pinned logic
sched: Fix sched-domain avg_load calculation
* 'timer-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
RTC: rtc-mrst: follow on to the change of rtc_device_register()
RTC: add missing "return 0" in new alarm func for rtc-bfin.c
RTC: Fix s3c compile error due to missing s3c_rtc_setpie
RTC: Fix early irqs caused by calling rtc_set_alarm too early
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86, amd: Disable GartTlbWlkErr when BIOS forgets it
x86, NUMA: Fix fakenuma boot failure
x86/mrst: Fix boot crash caused by incorrect pin to irq mapping
x86/ce4100: Add reg property to bridges
|
|
It's a pretty close match to what we had before - the timer triggering
would mean that nobody unplugged the plug in due time, in the new
scheme this matches very closely what the schedule() unplug now is.
It's essentially the difference between an explicit unplug (IO unplug)
or an implicit unplug (timer unplug, we scheduled with pending IO
queued).
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
|
|
Linus correctly observes that the most important dispatch cases
are now done from kblockd, this isn't ideal for latency reasons.
The original reason for switching dispatches out-of-line was to
avoid too deep a stack, so by _only_ letting the "accidental"
flush directly in schedule() be guarded by offload to kblockd,
we should be able to get the best of both worlds.
So add a blk_schedule_flush_plug() that offloads to kblockd,
and only use that from the schedule() path.
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
|
|
* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
block: only force kblockd unplugging from the schedule() path
block: cleanup the block plug helper functions
block, blk-sysfs: Use the variable directly instead of a function call
block: move queue run on unplug to kblockd
block: kill queue_sync_plugs()
block: readd plug trace event
block: add callback function for unplug notification
block: add comment on why we save and disable interrupts in flush_plug_list()
block: fixup block IO unplug trace call
block: remove block_unplug_timer() trace point
block: splice plug list to local context
|
|
The FLAGS_HAS_TIMEOUT flag was not getting set, causing the restart_block to
restart futex_wait() without a timeout after a signal.
Commit b41277dc7a18ee332d in 2.6.38 introduced the regression by accidentally
removing the the FLAGS_HAS_TIMEOUT assignment from futex_wait() during the setup
of the restart block. Restore the originaly behavior.
Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=32922
Reported-by: Tim Smith <tsmith201104@yahoo.com>
Reported-by: Torsten Hilbrich <torsten.hilbrich@secunet.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: John Kacur <jkacur@redhat.com>
Cc: stable@kernel.org
Link: http://lkml.kernel.org/r/%3Cdaac0eb3af607f72b9a4d3126b2ba8fb5ed3b883.1302820917.git.dvhart%40linux.intel.com%3E
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
We really only want to unplug the pending IO when the process actually
goes to sleep. So move the test for flushing the plug up to the place
where we actually deactivate the task - where we have properly checked
for preemption and for the process really sleeping.
Acked-by: Jens Axboe <jaxboe@fusionio.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
It was removed with the on-stack plugging, readd it and track the
depth of requests added when flushing the plug.
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
|
|
We no longer have an unplug timer running, so no point in keeping
the trace point.
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
|
|
Make XEN_SAVE_RESTORE select HIBERNATE_CALLBACKS.
Remove XEN_SAVE_RESTORE dependency from PM_SLEEP.
Signed-off-by: Shriram Rajagopalan <rshriram@cs.ubc.ca>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
|
|
Xen save/restore is going to use hibernate device callbacks for
quiescing devices and putting them back to normal operations and it
would need to select CONFIG_HIBERNATION for this purpose. However,
that also would cause the hibernate interfaces for user space to be
enabled, which might confuse user space, because the Xen kernels
don't support hibernation. Moreover, it would be wasteful, as it
would make the Xen kernels include a substantial amount of code that
they would never use.
To address this issue introduce new power management Kconfig option
CONFIG_HIBERNATE_CALLBACKS, such that it will only select the code
that is necessary for the hibernate device callbacks to work and make
CONFIG_HIBERNATION select it. Then, Xen save/restore will be able to
select CONFIG_HIBERNATE_CALLBACKS without dragging the entire
hibernate code along with it.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Tested-by: Shriram Rajagopalan <rshriram@cs.ubc.ca>
|
|
The scheduler load balancer has specific code to deal with cases of
unbalanced system due to lots of unmovable tasks (for example because of
hard CPU affinity). In those situation, it excludes the busiest CPU that
has pinned tasks for load balance consideration such that it can perform
second 2nd load balance pass on the rest of the system.
This all works as designed if there is only one cgroup in the system.
However, when we have multiple cgroups, this logic has false positives and
triggers multiple load balance passes despite there are actually no pinned
tasks at all.
The reason it has false positives is that the all pinned logic is deep in
the lowest function of can_migrate_task() and is too low level:
load_balance_fair() iterates each task group and calls balance_tasks() to
migrate target load. Along the way, balance_tasks() will also set a
all_pinned variable. Given that task-groups are iterated, this all_pinned
variable is essentially the status of last group in the scanning process.
Task group can have number of reasons that no load being migrated, none
due to cpu affinity. However, this status bit is being propagated back up
to the higher level load_balance(), which incorrectly think that no tasks
were moved. It kick off the all pinned logic and start multiple passes
attempt to move load onto puller CPU.
To fix this, move the all_pinned aggregation up at the iterator level.
This ensures that the status is aggregated over all task-groups, not just
last one in the list.
Signed-off-by: Ken Chen <kenchen@google.com>
Cc: stable@kernel.org
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/BANLkTi=ernzNawaR5tJZEsV_QVnfxqXmsQ@mail.gmail.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
In function find_busiest_group(), the sched-domain avg_load isn't
calculated at all if there is a group imbalance within the domain. This
will cause erroneous imbalance calculation.
The reason is that calculate_imbalance() sees sds->avg_load = 0 and it
will dump entire sds->max_load into imbalance variable, which is used
later on to migrate entire load from busiest CPU to the puller CPU.
This has two really bad effect:
1. stampede of task migration, and they won't be able to break out
of the bad state because of positive feedback loop: large load
delta -> heavier load migration -> larger imbalance and the cycle
goes on.
2. severe imbalance in CPU queue depth. This causes really long
scheduling latency blip which affects badly on application that
has tight latency requirement.
The fix is to have kernel calculate domain avg_load in both cases. This
will ensure that imbalance calculation is always sensible and the target
is usually half way between busiest and puller CPU.
Signed-off-by: Ken Chen <kenchen@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: <stable@kernel.org>
Link: http://lkml.kernel.org/r/20110408002322.3A0D812217F@elm.corp.google.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
There is a bug in perf_event_enable_on_exec() when cgroup events are
active on a CPU: the cgroup events may be scheduled twice causing event
state corruptions which eventually may lead to kernel panics.
The reason is that the function needs to first schedule out the cgroup
events, just like for the per-thread events. The cgroup event are
scheduled back in automatically from the perf_event_context_sched_in()
function.
The patch also adds a WARN_ON_ONCE() is perf_cgroup_switch() to catch any
bogus state.
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20110406005454.GA1062@quad
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Fix erroneous syscall kernel-doc comments in kernel/signal.c.
Reported-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
'timers-fixes-for-linus', 'irq-fixes-for-linus' and 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86-32, fpu: Fix FPU exception handling on non-SSE systems
x86, hibernate: Initialize mmu_cr4_features during boot
x86-32, NUMA: Fix ACPI NUMA init broken by recent x86-64 change
x86: visws: Fixup irq overhaul fallout
* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
sched: Clean up rebalance_domains() load-balance interval calculation
* 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86/mrst/vrtc: Fix boot crash in mrst_rtc_init()
rtc, x86/mrst/vrtc: Fix boot crash in rtc_read_alarm()
* 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
genirq: Fix cpumask leak in __setup_irq()
* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
perf probe: Fix listing incorrect line number with inline function
perf probe: Fix to find recursively inlined function
perf probe: Fix multiple --vars options behavior
perf probe: Fix to remove redundant close
perf probe: Fix to ensure function declared file
|
|
* 'for-linus2' of git://git.profusion.mobi/users/lucas/linux-2.6:
Fix common misspellings
|
|
Instead of the possible multiple-evaluation of num_online_cpus()
in rebalance_domains() that Linus reported, avoid it altogether
in the normal case since it's implemented with a Hamming weight
function over a cpu bitmask which can be darn expensive for those
with big iron.
This also makes it cleaner, smaller and documents the code.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1301991265.2225.12.camel@twins>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Add kernel-doc to syscalls in signal.c.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
General coding style and comment fixes; no code changes:
- Use multi-line-comment coding style.
- Put some function signatures completely on one line.
- Hyphenate some words.
- Spell Posix as POSIX.
- Correct typos & spellos in some comments.
- Drop trailing whitespace.
- End sentences with periods.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
sched: Fix rebalance interval calculation
sched, doc: Beef up load balancing description
sched: Leave sched_setscheduler() earlier if possible, do not disturb SCHED_FIFO tasks
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
perf: Fix task_struct reference leak
perf: Fix task context scheduling
perf: mmap 512 kiB by default
perf: Rebase max unprivileged mlock threshold on top of page size
perf tools: Fix NO_NEWT=1 python build error
perf symbols: Properly align symbol_conf.priv_size
perf tools: Emit clearer message for sys_perf_event_open ENOENT return
perf tools: Fixup exit path when not able to open events
perf symbols: Fix vsyscall symbol lookup
oprofile, x86: Allow setting EDGE/INV/CMASK for counter events
|
|
The ADJ_SETOFFSET bit added in commit 094aa188 ("ntp: Add ADJ_SETOFFSET
mode bit") also introduced a way for any user to change the system time.
Sneaky or buggy calls to adjtimex() could set
ADJ_OFFSET_SS_READ | ADJ_SETOFFSET
which would result in a successful call to timekeeping_inject_offset().
This patch fixes the issue by adding the capability check.
Signed-off-by: Richard Cochran <richard.cochran@omicron.at>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The allocated cpumask should be freed in __setup_irq().
Signed-off-by: Xiaotian Feng <dfeng@redhat.com>
LKML-Reference: <1301744375-6812-1-git-send-email-dfeng@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
On ppc64 the crashkernel region almost always overlaps an area of firmware.
This works fine except when using the sysfs interface to reduce the kdump
region. If we free the firmware area we are guaranteed to crash.
Rename free_reserved_phys_range to crash_free_reserved_phys_range and make
it a weak function so we can override it.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
|
|
Fixes generated by 'codespell' and manually reviewed.
Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
|
|
sys_perf_event_open() had an imbalance in the number of task refs it
took causing memory leakage
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: stable@kernel.org # .37+
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Ensure we allow 512 kiB + 1 page for user control without
assuming a 4096 bytes page size.
Reported-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: <stable@kernel.org>
LKML-Reference: <1301535209-9679-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
The interval for checking scheduling domains if they are due to be
balanced currently depends on boot state NR_CPUS, which may not
accurately reflect the number of online CPUs at the time of check.
Thus replace NR_CPUS with num_online_cpus().
(ed: Should only affect those who set NR_CPUS really high, such as 4096
or so :-)
Signed-off-by: Sisir Koppaka <sisir.koppaka@gmail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <AANLkTikqHWid2Q93F5U5Qw5snJH8C5PXoa7J6=6hYO94@mail.gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
SCHED_FIFO tasks
sched_setscheduler() (in sched.c) is called in order of changing the
scheduling policy and/or the real-time priority of a task. Thus,
if we find out that neither of those are actually being modified, it
is possible to return earlier and save the overhead of a full
deactivate+activate cycle of the task in question.
Beside that, if we have more than one SCHED_FIFO task with the same
priority on the same rq (which means they share the same priority queue)
having one of them changing its position in the priority queue because of
a sched_setscheduler (as it happens by means of the deactivate+activate)
that does not actually change the priority violates POSIX which states,
for SCHED_FIFO:
"If a thread whose policy or priority has been modified by
pthread_setschedprio() is a running thread or is runnable, the effect on
its position in the thread list depends on the direction of the
modification, as follows: a. <...> b. If the priority is unchanged, the
thread does not change position in the thread list. c. <...>"
http://pubs.opengroup.org/onlinepubs/009695399/functions/xsh_chap02_08.html
(ed: And the POSIX specification here does, briefly and somewhat unexpectedly,
match what common sense tells us as well. )
Signed-off-by: Dario Faggioli <raistlin@linux.it>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1300971618.3960.82.camel@Palantir>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Reported-by: michael@ellerman.id.au
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linuxppc-dev@lists.ozlabs.org
|
|
All users converted to new interface.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
The only subtle difference is that alpha uses ACTUAL_NR_IRQS and
prints the IRQF_DISABLED flag.
Change the generic implementation to deal with ACTUAL_NR_IRQS if
defined.
The IRQF_DISABLED printing is pointless, as we nowadays run all
interrupts with irqs disabled.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
The late night fixup missed to convert the data type from irq_desc to
irq_data, which results in a harmless but annoying warning.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'irq-cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
vlynq: Convert irq functions
* 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
genirq; Fix cleanup fallout
genirq: Fix typo and remove unused variable
genirq: Fix new kernel-doc warnings
genirq: Add setter for AFFINITY_SET in irq_data state
genirq: Provide setter inline for IRQD_IRQ_INPROGRESS
genirq: Remove handle_IRQ_event
arm: Ns9xxx: Remove private irq flow handler
powerpc: cell: Use the core flow handler
genirq: Provide edge_eoi flow handler
genirq: Move INPROGRESS, MASKED and DISABLED state flags to irq_data
genirq: Split irq_set_affinity() so it can be called with lock held.
genirq: Add chip flag for restricting cpu_on/offline calls
genirq: Add chip hooks for taking CPUs on/off line.
genirq: Add irq disabled flag to irq_data state
genirq: Reserve the irq when calling irq_set_chip()
|
|
I missed the CONFIG_GENERIC_PENDING_IRQ dependency in the affinity
related functions and the IRQ_LEVEL propagation into irq_data
state. Did not pop up on my main test platforms. :(
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: David Daney <ddaney@caviumnetworks.com>
|
|
Commit da48524eb206 ("Prevent rt_sigqueueinfo and rt_tgsigqueueinfo
from spoofing the signal code") made the check on si_code too strict.
There are several legitimate places where glibc wants to queue a
negative si_code different from SI_QUEUE:
- This was first noticed with glibc's aio implementation, which wants
to queue a signal with si_code SI_ASYNCIO; the current kernel
causes glibc's tst-aio4 test to fail because rt_sigqueueinfo()
fails with EPERM.
- Further examination of the glibc source shows that getaddrinfo_a()
wants to use SI_ASYNCNL (which the kernel does not even define).
The timer_create() fallback code wants to queue signals with SI_TIMER.
As suggested by Oleg Nesterov <oleg@redhat.com>, loosen the check to
forbid only the problematic SI_TKILL case.
Reported-by: Klaus Dittrich <kladit@arcor.de>
Acked-by: Julien Tinnes <jln@google.com>
Cc: <stable@kernel.org>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Sigh, I'm overworked.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Fix new irq-related kernel-doc warnings in 2.6.38:
Warning(kernel/irq/manage.c:149): No description found for parameter 'mask'
Warning(kernel/irq/manage.c:149): Excess function parameter 'cpumask' description in 'irq_set_affinity'
Warning(include/linux/irq.h:161): No description found for parameter 'state_use_accessors'
Warning(include/linux/irq.h:161): Excess struct/union/enum/typedef member 'state_use_accessor' description in 'irq_data'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
LKML-Reference: <20110318093356.b939558d.randy.dunlap@oracle.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Last user gone.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
This is a replacment for the cell flow handler which is in the way of
cleanups. Must be selected to avoid general bloat.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
We really need these flags for some of the interrupt chips. Move it
from internal state to irq_data and provide proper accessors.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: David Daney <ddaney@caviumnetworks.com>
|
|
The .irq_cpu_online() and .irq_cpu_offline() functions may need to
adjust affinity, but they are called with the descriptor lock held.
Create __irq_set_affinity_locked() which is called with the lock held.
Make irq_set_affinity() just a wrapper that acquires the lock.
[ tglx: Changed the argument to irq_data, added a !desc check and
moved the !irq_set_affinity check where it belongs ]
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Cc: linux-mips@linux-mips.org
Cc: ralf@linux-mips.org
LKML-Reference: <1301081931-11240-4-git-send-email-ddaney@caviumnetworks.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Add a flag which indicates that the on/offline callback should only be
called on enabled interrupts.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
