summaryrefslogtreecommitdiff
path: root/mm/slub.c
AgeCommit message (Collapse)Author
2014-07-03slub: fix off by one in number of slab testsJoonsoo Kim
min_partial means minimum number of slab cached in node partial list. So, if nr_partial is less than it, we keep newly empty slab on node partial list rather than freeing it. But if nr_partial is equal or greater than it, it means that we have enough partial slabs so should free newly empty slab. Current implementation missed the equal case so if we set min_partial is 0, then, at least one slab could be cached. This is critical problem to kmemcg destroying logic because it doesn't works properly if some slabs is cached. This patch fixes this problem. Fixes 91cb69620284 ("slub: make dead memcg caches discard free slabs immediately"). Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: Vladimir Davydov <vdavydov@parallels.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06slub: search partial list on numa_mem_id(), instead of numa_node_id()Joonsoo Kim
Currently, if allocation constraint to node is NUMA_NO_NODE, we search a partial slab on numa_node_id() node. This doesn't work properly on a system having memoryless nodes, since it can have no memory on that node so there must be no partial slab on that node. On that node, page allocation always falls back to numa_mem_id() first. So searching a partial slab on numa_node_id() in that case is the proper solution for the memoryless node case. Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: Nishanth Aravamudan <nacc@linux.vnet.ibm.com> Acked-by: David Rientjes <rientjes@google.com> Acked-by: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Han Pingtian <hanpt@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04mm: replace __get_cpu_var uses with this_cpu_ptrChristoph Lameter
Replace places where __get_cpu_var() is used for an address calculation with this_cpu_ptr(). Signed-off-by: Christoph Lameter <cl@linux.com> Cc: Tejun Heo <tj@kernel.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04memcg, slab: merge memcg_{bind,release}_pages to memcg_{un}charge_slabVladimir Davydov
Currently we have two pairs of kmemcg-related functions that are called on slab alloc/free. The first is memcg_{bind,release}_pages that count the total number of pages allocated on a kmem cache. The second is memcg_{un}charge_slab that {un}charge slab pages to kmemcg resource counter. Let's just merge them to keep the code clean. Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Glauber Costa <glommer@gmail.com> Cc: Pekka Enberg <penberg@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04slab: get_online_mems for kmem_cache_{create,destroy,shrink}Vladimir Davydov
When we create a sl[au]b cache, we allocate kmem_cache_node structures for each online NUMA node. To handle nodes taken online/offline, we register memory hotplug notifier and allocate/free kmem_cache_node corresponding to the node that changes its state for each kmem cache. To synchronize between the two paths we hold the slab_mutex during both the cache creationg/destruction path and while tuning per-node parts of kmem caches in memory hotplug handler, but that's not quite right, because it does not guarantee that a newly created cache will have all kmem_cache_nodes initialized in case it races with memory hotplug. For instance, in case of slub: CPU0 CPU1 ---- ---- kmem_cache_create: online_pages: __kmem_cache_create: slab_memory_callback: slab_mem_going_online_callback: lock slab_mutex for each slab_caches list entry allocate kmem_cache node unlock slab_mutex lock slab_mutex init_kmem_cache_nodes: for_each_node_state(node, N_NORMAL_MEMORY) allocate kmem_cache node add kmem_cache to slab_caches list unlock slab_mutex online_pages (continued): node_states_set_node As a result we'll get a kmem cache with not all kmem_cache_nodes allocated. To avoid issues like that we should hold get/put_online_mems() during the whole kmem cache creation/destruction/shrink paths, just like we deal with cpu hotplug. This patch does the trick. Note, that after it's applied, there is no need in taking the slab_mutex for kmem_cache_shrink any more, so it is removed from there. Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Cc: Toshi Kani <toshi.kani@hp.com> Cc: Xishi Qiu <qiuxishi@huawei.com> Cc: Jiang Liu <liuj97@gmail.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: David Rientjes <rientjes@google.com> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04mem-hotplug: implement get/put_online_memsVladimir Davydov
kmem_cache_{create,destroy,shrink} need to get a stable value of cpu/node online mask, because they init/destroy/access per-cpu/node kmem_cache parts, which can be allocated or destroyed on cpu/mem hotplug. To protect against cpu hotplug, these functions use {get,put}_online_cpus. However, they do nothing to synchronize with memory hotplug - taking the slab_mutex does not eliminate the possibility of race as described in patch 2. What we need there is something like get_online_cpus, but for memory. We already have lock_memory_hotplug, which serves for the purpose, but it's a bit of a hammer right now, because it's backed by a mutex. As a result, it imposes some limitations to locking order, which are not desirable, and can't be used just like get_online_cpus. That's why in patch 1 I substitute it with get/put_online_mems, which work exactly like get/put_online_cpus except they block not cpu, but memory hotplug. [ v1 can be found at https://lkml.org/lkml/2014/4/6/68. I NAK'ed it by myself, because it used an rw semaphore for get/put_online_mems, making them dead lock prune. ] This patch (of 2): {un}lock_memory_hotplug, which is used to synchronize against memory hotplug, is currently backed by a mutex, which makes it a bit of a hammer - threads that only want to get a stable value of online nodes mask won't be able to proceed concurrently. Also, it imposes some strong locking ordering rules on it, which narrows down the set of its usage scenarios. This patch introduces get/put_online_mems, which are the same as get/put_online_cpus, but for memory hotplug, i.e. executing a code inside a get/put_online_mems section will guarantee a stable value of online nodes, present pages, etc. lock_memory_hotplug()/unlock_memory_hotplug() are removed altogether. Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Cc: Toshi Kani <toshi.kani@hp.com> Cc: Xishi Qiu <qiuxishi@huawei.com> Cc: Jiang Liu <liuj97@gmail.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: David Rientjes <rientjes@google.com> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04mm: get rid of __GFP_KMEMCGVladimir Davydov
Currently to allocate a page that should be charged to kmemcg (e.g. threadinfo), we pass __GFP_KMEMCG flag to the page allocator. The page allocated is then to be freed by free_memcg_kmem_pages. Apart from looking asymmetrical, this also requires intrusion to the general allocation path. So let's introduce separate functions that will alloc/free pages charged to kmemcg. The new functions are called alloc_kmem_pages and free_kmem_pages. They should be used when the caller actually would like to use kmalloc, but has to fall back to the page allocator for the allocation is large. They only differ from alloc_pages and free_pages in that besides allocating or freeing pages they also charge them to the kmem resource counter of the current memory cgroup. [sfr@canb.auug.org.au: export kmalloc_order() to modules] Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Acked-by: Greg Thelen <gthelen@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: Glauber Costa <glommer@gmail.com> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Pekka Enberg <penberg@kernel.org> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04sl[au]b: charge slabs to kmemcg explicitlyVladimir Davydov
We have only a few places where we actually want to charge kmem so instead of intruding into the general page allocation path with __GFP_KMEMCG it's better to explictly charge kmem there. All kmem charges will be easier to follow that way. This is a step towards removing __GFP_KMEMCG. It removes __GFP_KMEMCG from memcg caches' allocflags. Instead it makes slab allocation path call memcg_charge_kmem directly getting memcg to charge from the cache's memcg params. This also eliminates any possibility of misaccounting an allocation going from one memcg's cache to another memcg, because now we always charge slabs against the memcg the cache belongs to. That's why this patch removes the big comment to memcg_kmem_get_cache. Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Acked-by: Greg Thelen <gthelen@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: Glauber Costa <glommer@gmail.com> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Pekka Enberg <penberg@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04mm: slub: fix ALLOC_SLOWPATH statDave Hansen
There used to be only one path out of __slab_alloc(), and ALLOC_SLOWPATH got bumped in that exit path. Now there are two, and a bunch of gotos. ALLOC_SLOWPATH can now get set more than once during a single call to __slab_alloc() which is pretty bogus. Here's the sequence: 1. Enter __slab_alloc(), fall through all the way to the stat(s, ALLOC_SLOWPATH); 2. hit 'if (!freelist)', and bump DEACTIVATE_BYPASS, jump to new_slab (goto #1) 3. Hit 'if (c->partial)', bump CPU_PARTIAL_ALLOC, goto redo (goto #2) 4. Fall through in the same path we did before all the way to stat(s, ALLOC_SLOWPATH) 5. bump ALLOC_REFILL stat, then return Doing this is obviously bogus. It keeps us from being able to accurately compare ALLOC_SLOWPATH vs. ALLOC_FASTPATH. It also means that the total number of allocs always exceeds the total number of frees. This patch moves stat(s, ALLOC_SLOWPATH) to be called from the same place that __slab_alloc() is. This makes it much less likely that ALLOC_SLOWPATH will get botched again in the spaghetti-code inside __slab_alloc(). Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Christoph Lameter <cl@linux.com> Acked-by: David Rientjes <rientjes@google.com> Cc: Pekka Enberg <penberg@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04mm, slab: suppress out of memory warning unless debug is enabledDavid Rientjes
When the slab or slub allocators cannot allocate additional slab pages, they emit diagnostic information to the kernel log such as current number of slabs, number of objects, active objects, etc. This is always coupled with a page allocation failure warning since it is controlled by !__GFP_NOWARN. Suppress this out of memory warning if the allocator is configured without debug supported. The page allocation failure warning will indicate it is a failed slab allocation, the order, and the gfp mask, so this is only useful to diagnose allocator issues. Since CONFIG_SLUB_DEBUG is already enabled by default for the slub allocator, there is no functional change with this patch. If debug is disabled, however, the warnings are now suppressed. Signed-off-by: David Rientjes <rientjes@google.com> Cc: Pekka Enberg <penberg@kernel.org> Acked-by: Christoph Lameter <cl@linux.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04mm/slub.c: convert vnsprintf-static to va_formatFabian Frederick
Inspired by Joe Perches suggestion in ntfs logging clean-up. Signed-off-by: Fabian Frederick <fabf@skynet.be> Acked-by: Christoph Lameter <cl@linux.com> Cc: Joe Perches <joe@perches.com> Cc: Pekka Enberg <penberg@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04mm/slub.c: convert printk to pr_foo()Fabian Frederick
All printk(KERN_foo converted to pr_foo() Default printk converted to pr_warn() Coalesce format fragments Signed-off-by: Fabian Frederick <fabf@skynet.be> Acked-by: Christoph Lameter <cl@linux.com> Cc: Joe Perches <joe@perches.com> Cc: Pekka Enberg <penberg@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-05-06slub: use sysfs'es release mechanism for kmem_cacheChristoph Lameter
debugobjects warning during netfilter exit: ------------[ cut here ]------------ WARNING: CPU: 6 PID: 4178 at lib/debugobjects.c:260 debug_print_object+0x8d/0xb0() ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x20 Modules linked in: CPU: 6 PID: 4178 Comm: kworker/u16:2 Tainted: G W 3.11.0-next-20130906-sasha #3984 Workqueue: netns cleanup_net Call Trace: dump_stack+0x52/0x87 warn_slowpath_common+0x8c/0xc0 warn_slowpath_fmt+0x46/0x50 debug_print_object+0x8d/0xb0 __debug_check_no_obj_freed+0xa5/0x220 debug_check_no_obj_freed+0x15/0x20 kmem_cache_free+0x197/0x340 kmem_cache_destroy+0x86/0xe0 nf_conntrack_cleanup_net_list+0x131/0x170 nf_conntrack_pernet_exit+0x5d/0x70 ops_exit_list+0x5e/0x70 cleanup_net+0xfb/0x1c0 process_one_work+0x338/0x550 worker_thread+0x215/0x350 kthread+0xe7/0xf0 ret_from_fork+0x7c/0xb0 Also during dcookie cleanup: WARNING: CPU: 12 PID: 9725 at lib/debugobjects.c:260 debug_print_object+0x8c/0xb0() ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x20 Modules linked in: CPU: 12 PID: 9725 Comm: trinity-c141 Not tainted 3.15.0-rc2-next-20140423-sasha-00018-gc4ff6c4 #408 Call Trace: dump_stack (lib/dump_stack.c:52) warn_slowpath_common (kernel/panic.c:430) warn_slowpath_fmt (kernel/panic.c:445) debug_print_object (lib/debugobjects.c:262) __debug_check_no_obj_freed (lib/debugobjects.c:697) debug_check_no_obj_freed (lib/debugobjects.c:726) kmem_cache_free (mm/slub.c:2689 mm/slub.c:2717) kmem_cache_destroy (mm/slab_common.c:363) dcookie_unregister (fs/dcookies.c:302 fs/dcookies.c:343) event_buffer_release (arch/x86/oprofile/../../../drivers/oprofile/event_buffer.c:153) __fput (fs/file_table.c:217) ____fput (fs/file_table.c:253) task_work_run (kernel/task_work.c:125 (discriminator 1)) do_notify_resume (include/linux/tracehook.h:196 arch/x86/kernel/signal.c:751) int_signal (arch/x86/kernel/entry_64.S:807) Sysfs has a release mechanism. Use that to release the kmem_cache structure if CONFIG_SYSFS is enabled. Only slub is changed - slab currently only supports /proc/slabinfo and not /sys/kernel/slab/*. We talked about adding that and someone was working on it. [akpm@linux-foundation.org: fix CONFIG_SYSFS=n build] [akpm@linux-foundation.org: fix CONFIG_SYSFS=n build even more] Signed-off-by: Christoph Lameter <cl@linux.com> Reported-by: Sasha Levin <sasha.levin@oracle.com> Tested-by: Sasha Levin <sasha.levin@oracle.com> Acked-by: Greg KH <greg@kroah.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Pekka Enberg <penberg@kernel.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Bart Van Assche <bvanassche@acm.org> Cc: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-05-06slub: fix memcg_propagate_slab_attrsVladimir Davydov
After creating a cache for a memcg we should initialize its sysfs attrs with the values from its parent. That's what memcg_propagate_slab_attrs is for. Currently it's broken - we clearly muddled root-vs-memcg caches there. Let's fix it up. Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-13Merge branch 'slab/next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/penberg/linux Pull slab changes from Pekka Enberg: "The biggest change is byte-sized freelist indices which reduces slab freelist memory usage: https://lkml.org/lkml/2013/12/2/64" * 'slab/next' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/linux: mm: slab/slub: use page->list consistently instead of page->lru mm/slab.c: cleanup outdated comments and unify variables naming slab: fix wrongly used macro slub: fix high order page allocation problem with __GFP_NOFAIL slab: Make allocations with GFP_ZERO slightly more efficient slab: make more slab management structure off the slab slab: introduce byte sized index for the freelist of a slab slab: restrict the number of objects in a slab slab: introduce helper functions to get/set free object slab: factor out calculate nr objects in cache_estimate
2014-04-07slub: use raw_cpu_inc for incrementing statisticsChristoph Lameter
Statistics are not critical to the operation of the allocation but should also not cause too much overhead. When __this_cpu_inc is altered to check if preemption is disabled this triggers. Use raw_cpu_inc to avoid the checks. Using this_cpu_ops may cause interrupt disable/enable sequences on various arches which may significantly impact allocator performance. [akpm@linux-foundation.org: add comment] Signed-off-by: Christoph Lameter <cl@linux.com> Cc: Fengguang Wu <fengguang.wu@intel.com> Cc: Pekka Enberg <penberg@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07slub: fix leak of 'name' in sysfs_slab_addDave Jones
The failure paths of sysfs_slab_add don't release the allocation of 'name' made by create_unique_id() a few lines above the context of the diff below. Create a common exit path to make it more obvious what needs freeing. [vdavydov@parallels.com: free the name only if !unmergeable] Signed-off-by: Dave Jones <davej@fedoraproject.org> Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Cc: Pekka Enberg <penberg@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07slub: rework sysfs layout for memcg cachesVladimir Davydov
Currently, we try to arrange sysfs entries for memcg caches in the same manner as for global caches. Apart from turning /sys/kernel/slab into a mess when there are a lot of kmem-active memcgs created, it actually does not work properly - we won't create more than one link to a memcg cache in case its parent is merged with another cache. For instance, if A is a root cache merged with another root cache B, we will have the following sysfs setup: X A -> X B -> X where X is some unique id (see create_unique_id()). Now if memcgs M and N start to allocate from cache A (or B, which is the same), we will get: X X:M X:N A -> X B -> X A:M -> X:M A:N -> X:N Since B is an alias for A, we won't get entries B:M and B:N, which is confusing. It is more logical to have entries for memcg caches under the corresponding root cache's sysfs directory. This would allow us to keep sysfs layout clean, and avoid such inconsistencies like one described above. This patch does the trick. It creates a "cgroup" kset in each root cache kobject to keep its children caches there. Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: David Rientjes <rientjes@google.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Glauber Costa <glommer@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07slub: adjust memcg caches when creating cache aliasVladimir Davydov
Otherwise, kzalloc() called from a memcg won't clear the whole object. Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: David Rientjes <rientjes@google.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Glauber Costa <glommer@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07memcg, slab: never try to merge memcg cachesVladimir Davydov
When a kmem cache is created (kmem_cache_create_memcg()), we first try to find a compatible cache that already exists and can handle requests from the new cache, i.e. has the same object size, alignment, ctor, etc. If there is such a cache, we do not create any new caches, instead we simply increment the refcount of the cache found and return it. Currently we do this procedure not only when creating root caches, but also for memcg caches. However, there is no point in that, because, as every memcg cache has exactly the same parameters as its parent and cache merging cannot be turned off in runtime (only on boot by passing "slub_nomerge"), the root caches of any two potentially mergeable memcg caches should be merged already, i.e. it must be the same root cache, and therefore we couldn't even get to the memcg cache creation, because it already exists. The only exception is boot caches - they are explicitly forbidden to be merged by setting their refcount to -1. There are currently only two of them - kmem_cache and kmem_cache_node, which are used in slab internals (I do not count kmalloc caches as their refcount is set to 1 immediately after creation). Since they are prevented from merging preliminary I guess we should avoid to merge their children too. So let's remove the useless code responsible for merging memcg caches. Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: David Rientjes <rientjes@google.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Glauber Costa <glommer@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07mm, mempolicy: rename slab_node for clarityDavid Rientjes
slab_node() is actually a mempolicy function, so rename it to mempolicy_slab_node() to make it clearer that it used for processes with mempolicies. At the same time, cleanup its code by saving numa_mem_id() in a local variable (since we require a node with memory, not just any node) and remove an obsolete comment that assumes the mempolicy is actually passed into the function. Signed-off-by: David Rientjes <rientjes@google.com> Acked-by: Christoph Lameter <cl@linux.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Jianguo Wu <wujianguo@huawei.com> Cc: Tim Hockin <thockin@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03slub: do not drop slab_mutex for sysfs_slab_addVladimir Davydov
We release the slab_mutex while calling sysfs_slab_add from __kmem_cache_create since commit 66c4c35c6bc5 ("slub: Do not hold slub_lock when calling sysfs_slab_add()"), because kobject_uevent called by sysfs_slab_add might block waiting for the usermode helper to exec, which would result in a deadlock if we took the slab_mutex while executing it. However, apart from complicating synchronization rules, releasing the slab_mutex on kmem cache creation can result in a kmemcg-related race. The point is that we check if the memcg cache exists before going to __kmem_cache_create, but register the new cache in memcg subsys after it. Since we can drop the mutex there, several threads can see that the memcg cache does not exist and proceed to creating it, which is wrong. Fortunately, recently kobject_uevent was patched to call the usermode helper with the UMH_NO_WAIT flag, making the deadlock impossible. Therefore there is no point in releasing the slab_mutex while calling sysfs_slab_add, so let's simplify kmem_cache_create synchronization and fix the kmemcg-race mentioned above by holding the slab_mutex during the whole cache creation path. Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Acked-by: Christoph Lameter <cl@linux.com> Cc: Greg KH <greg@kroah.com> Cc: Pekka Enberg <penberg@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03mm: optimize put_mems_allowed() usageMel Gorman
Since put_mems_allowed() is strictly optional, its a seqcount retry, we don't need to evaluate the function if the allocation was in fact successful, saving a smp_rmb some loads and comparisons on some relative fast-paths. Since the naming, get/put_mems_allowed() does suggest a mandatory pairing, rename the interface, as suggested by Mel, to resemble the seqcount interface. This gives us: read_mems_allowed_begin() and read_mems_allowed_retry(), where it is important to note that the return value of the latter call is inverted from its previous incarnation. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Mel Gorman <mgorman@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-03-27slub: fix high order page allocation problem with __GFP_NOFAILJoonsoo Kim
SLUB already try to allocate high order page with clearing __GFP_NOFAIL. But, when allocating shadow page for kmemcheck, it missed clearing the flag. This trigger WARN_ON_ONCE() reported by Christian Casteyde. https://bugzilla.kernel.org/show_bug.cgi?id=65991 https://lkml.org/lkml/2013/12/3/764 This patch fix this situation by using same allocation flag as original allocation. Reported-by: Christian Casteyde <casteyde.christian@free.fr> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Pekka Enberg <penberg@kernel.org>
2014-02-11slub: do not assert not having lock in removing freed partialSteven Rostedt
Vladimir reported the following issue: Commit c65c1877bd68 ("slub: use lockdep_assert_held") requires remove_partial() to be called with n->list_lock held, but free_partial() called from kmem_cache_close() on cache destruction does not follow this rule, leading to a warning: WARNING: CPU: 0 PID: 2787 at mm/slub.c:1536 __kmem_cache_shutdown+0x1b2/0x1f0() Modules linked in: CPU: 0 PID: 2787 Comm: modprobe Tainted: G W 3.14.0-rc1-mm1+ #1 Hardware name: 0000000000000600 ffff88003ae1dde8 ffffffff816d9583 0000000000000600 0000000000000000 ffff88003ae1de28 ffffffff8107c107 0000000000000000 ffff880037ab2b00 ffff88007c240d30 ffffea0001ee5280 ffffea0001ee52a0 Call Trace: __kmem_cache_shutdown+0x1b2/0x1f0 kmem_cache_destroy+0x43/0xf0 xfs_destroy_zones+0x103/0x110 [xfs] exit_xfs_fs+0x38/0x4e4 [xfs] SyS_delete_module+0x19a/0x1f0 system_call_fastpath+0x16/0x1b His solution was to add a spinlock in order to quiet lockdep. Although there would be no contention to adding the lock, that lock also requires disabling of interrupts which will have a larger impact on the system. Instead of adding a spinlock to a location where it is not needed for lockdep, make a __remove_partial() function that does not test if the list_lock is held, as no one should have it due to it being freed. Also added a __add_partial() function that does not do the lock validation either, as it is not needed for the creation of the cache. Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Reported-by: Vladimir Davydov <vdavydov@parallels.com> Suggested-by: David Rientjes <rientjes@google.com> Acked-by: David Rientjes <rientjes@google.com> Acked-by: Vladimir Davydov <vdavydov@parallels.com> Acked-by: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-02-11mm/slub.c: list_lock may not be held in some circumstancesDavid Rientjes
Commit c65c1877bd68 ("slub: use lockdep_assert_held") incorrectly required that add_full() and remove_full() hold n->list_lock. The lock is only taken when kmem_cache_debug(s), since that's the only time it actually does anything. Require that the lock only be taken under such a condition. Reported-by: Larry Finger <Larry.Finger@lwfinger.net> Tested-by: Larry Finger <Larry.Finger@lwfinger.net> Tested-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Signed-off-by: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-02-02Merge branch 'slab/next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/penberg/linux Pull SLAB changes from Pekka Enberg: "Random bug fixes that have accumulated in my inbox over the past few months" * 'slab/next' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/linux: mm: Fix warning on make htmldocs caused by slab.c mm: slub: work around unneeded lockdep warning mm: sl[uo]b: fix misleading comments slub: Fix possible format string bug. slub: use lockdep_assert_held slub: Fix calculation of cpu slabs slab.h: remove duplicate kmalloc declaration and fix kernel-doc warnings
2014-01-31mm: slub: work around unneeded lockdep warningDave Hansen
The slub code does some setup during early boot in early_kmem_cache_node_alloc() with some local data. There is no possible way that another CPU can see this data, so the slub code doesn't unnecessarily lock it. However, some new lockdep asserts check to make sure that add_partial() _always_ has the list_lock held. Just add the locking, even though it is technically unnecessary. Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russell King <linux@arm.linux.org.uk> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by: Pekka Enberg <penberg@kernel.org>
2014-01-31mm/slub.c: fix page->_count corruption (again)Dave Hansen
Commit abca7c496584 ("mm: fix slab->page _count corruption when using slub") notes that we can not _set_ a page->counters directly, except when using a real double-cmpxchg. Doing so can lose updates to ->_count. That is an absolute rule: You may not *set* page->counters except via a cmpxchg. Commit abca7c496584 fixed this for the folks who have the slub cmpxchg_double code turned off at compile time, but it left the bad case alone. It can still be reached, and the same bug triggered in two cases: 1. Turning on slub debugging at runtime, which is available on the distro kernels that I looked at. 2. On 64-bit CPUs with no CMPXCHG16B (some early AMD x86-64 cpus, evidently) There are at least 3 ways we could fix this: 1. Take all of the exising calls to cmpxchg_double_slab() and __cmpxchg_double_slab() and convert them to take an old, new and target 'struct page'. 2. Do (1), but with the newly-introduced 'slub_data'. 3. Do some magic inside the two cmpxchg...slab() functions to pull the counters out of new_counters and only set those fields in page->{inuse,frozen,objects}. I've done (2) as well, but it's a bunch more code. This patch is an attempt at (3). This was the most straightforward and foolproof way that I could think to do this. This would also technically allow us to get rid of the ugly #if defined(CONFIG_HAVE_CMPXCHG_DOUBLE) && \ defined(CONFIG_HAVE_ALIGNED_STRUCT_PAGE) in 'struct page', but leaving it alone has the added benefit that 'counters' stays 'unsigned' instead of 'unsigned long', so all the copies that the slub code does stay a bit smaller. Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Matt Mackall <mpm@selenic.com> Cc: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-30mm/slub.c: do not VM_BUG_ON_PAGE() for temporary on-stack pagesDave Hansen
Commit 309381feaee5 ("mm: dump page when hitting a VM_BUG_ON using VM_BUG_ON_PAGE") added a bunch of VM_BUG_ON_PAGE() calls. But, most of the ones in the slub code are for _temporary_ 'struct page's which are declared on the stack and likely have lots of gunk in them. Dumping their contents out will just confuse folks looking at bad_page() output. Plus, if we try to page_to_pfn() on them or soemthing, we'll probably oops anyway. Turn them back in to VM_BUG_ON()s. Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Pekka Enberg <penberg@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-24mm: dump page when hitting a VM_BUG_ON using VM_BUG_ON_PAGESasha Levin
Most of the VM_BUG_ON assertions are performed on a page. Usually, when one of these assertions fails we'll get a BUG_ON with a call stack and the registers. I've recently noticed based on the requests to add a small piece of code that dumps the page to various VM_BUG_ON sites that the page dump is quite useful to people debugging issues in mm. This patch adds a VM_BUG_ON_PAGE(cond, page) which beyond doing what VM_BUG_ON() does, also dumps the page before executing the actual BUG_ON. [akpm@linux-foundation.org: fix up includes] Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-13slub: Fix possible format string bug.Tetsuo Handa
The "name" is determined at runtime and is parsed as format string. Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Pekka Enberg <penberg@kernel.org>
2014-01-13slub: use lockdep_assert_heldPeter Zijlstra
Instead of using comments in an attempt at getting the locking right, use proper assertions that actively warn you if you got it wrong. Also add extra braces in a few sites to comply with coding-style. Signed-off-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Pekka Enberg <penberg@kernel.org>
2013-12-29slub: Fix calculation of cpu slabsLi Zefan
/sys/kernel/slab/:t-0000048 # cat cpu_slabs 231 N0=16 N1=215 /sys/kernel/slab/:t-0000048 # cat slabs 145 N0=36 N1=109 See, the number of slabs is smaller than that of cpu slabs. The bug was introduced by commit 49e2258586b423684f03c278149ab46d8f8b6700 ("slub: per cpu cache for partial pages"). We should use page->pages instead of page->pobjects when calculating the number of cpu partial slabs. This also fixes the mapping of slabs and nodes. As there's no variable storing the number of total/active objects in cpu partial slabs, and we don't have user interfaces requiring those statistics, I just add WARN_ON for those cases. Cc: <stable@vger.kernel.org> # 3.2+ Acked-by: Christoph Lameter <cl@linux.com> Reviewed-by: Wanpeng Li <liwanp@linux.vnet.ibm.com> Signed-off-by: Li Zefan <lizefan@huawei.com> Signed-off-by: Pekka Enberg <penberg@kernel.org>
2013-11-22Merge branch 'slab/next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/penberg/linux Pull SLAB changes from Pekka Enberg: "The patches from Joonsoo Kim switch mm/slab.c to use 'struct page' for slab internals similar to mm/slub.c. This reduces memory usage and improves performance: https://lkml.org/lkml/2013/10/16/155 Rest of the changes are bug fixes from various people" * 'slab/next' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/linux: (21 commits) mm, slub: fix the typo in mm/slub.c mm, slub: fix the typo in include/linux/slub_def.h slub: Handle NULL parameter in kmem_cache_flags slab: replace non-existing 'struct freelist *' with 'void *' slab: fix to calm down kmemleak warning slub: proper kmemleak tracking if CONFIG_SLUB_DEBUG disabled slab: rename slab_bufctl to slab_freelist slab: remove useless statement for checking pfmemalloc slab: use struct page for slab management slab: replace free and inuse in struct slab with newly introduced active slab: remove SLAB_LIMIT slab: remove kmem_bufctl_t slab: change the management method of free objects of the slab slab: use __GFP_COMP flag for allocating slab pages slab: use well-defined macro, virt_to_slab() slab: overloading the RCU head over the LRU for RCU free slab: remove cachep in struct slab_rcu slab: remove nodeid in struct slab slab: remove colouroff in struct slab slab: change return type of kmem_getpages() to struct page ...
2013-11-16Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree updates from Jiri Kosina: "Usual earth-shaking, news-breaking, rocket science pile from trivial.git" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (23 commits) doc: usb: Fix typo in Documentation/usb/gadget_configs.txt doc: add missing files to timers/00-INDEX timekeeping: Fix some trivial typos in comments mm: Fix some trivial typos in comments irq: Fix some trivial typos in comments NUMA: fix typos in Kconfig help text mm: update 00-INDEX doc: Documentation/DMA-attributes.txt fix typo DRM: comment: `halve' -> `half' Docs: Kconfig: `devlopers' -> `developers' doc: typo on word accounting in kprobes.c in mutliple architectures treewide: fix "usefull" typo treewide: fix "distingush" typo mm/Kconfig: Grammar s/an/a/ kexec: Typo s/the/then/ Documentation/kvm: Update cpuid documentation for steal time and pv eoi treewide: Fix common typo in "identify" __page_to_pfn: Fix typo in comment Correct some typos for word frequency clk: fixed-factor: Fix a trivial typo ...
2013-11-13memcg, kmem: rename cache_from_memcg to cache_from_memcg_idxQiang Huang
We can't see the relationship with memcg from the parameters, so the name with memcg_idx would be more reasonable. Signed-off-by: Qiang Huang <h.huangqiang@huawei.com> Reviewed-by: Pekka Enberg <penberg@kernel.org> Acked-by: David Rientjes <rientjes@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Glauber Costa <glommer@parallels.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-11mm, slub: fix the typo in mm/slub.cZhi Yong Wu
Acked-by: Christoph Lameter <cl@linux.com> Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com> Signed-off-by: Pekka Enberg <penberg@kernel.org>
2013-11-11slub: Handle NULL parameter in kmem_cache_flagsChristoph Lameter
Andreas Herrmann writes: When I've used slub_debug kernel option (e.g. "slub_debug=,skbuff_fclone_cache" or similar) on a debug session I've seen a panic like: Highbank #setenv bootargs console=ttyAMA0 root=/dev/sda2 kgdboc.kgdboc=ttyAMA0,115200 slub_debug=,kmalloc-4096 earlyprintk=ttyAMA0 ... Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = c0004000 [00000000] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM Modules linked in: CPU: 0 PID: 0 Comm: swapper Tainted: G W 3.12.0-00048-gbe408cd #314 task: c0898360 ti: c088a000 task.ti: c088a000 PC is at strncmp+0x1c/0x84 LR is at kmem_cache_flags.isra.46.part.47+0x44/0x60 pc : [<c02c6da0>] lr : [<c0110a3c>] psr: 200001d3 sp : c088bea8 ip : c088beb8 fp : c088beb4 r10: 00000000 r9 : 413fc090 r8 : 00000001 r7 : 00000000 r6 : c2984a08 r5 : c0966e78 r4 : 00000000 r3 : 0000006b r2 : 0000000c r1 : 00000000 r0 : c2984a08 Flags: nzCv IRQs off FIQs off Mode SVC_32 ISA ARM Segment kernel Control: 10c5387d Table: 0000404a DAC: 00000015 Process swapper (pid: 0, stack limit = 0xc088a248) Stack: (0xc088bea8 to 0xc088c000) bea0: c088bed4 c088beb8 c0110a3c c02c6d90 c0966e78 00000040 bec0: ef001f00 00000040 c088bf14 c088bed8 c0112070 c0110a04 00000005 c010fac8 bee0: c088bf5c c088bef0 c010fac8 ef001f00 00000040 00000000 00000040 00000001 bf00: 413fc090 00000000 c088bf34 c088bf18 c0839190 c0112040 00000000 ef001f00 bf20: 00000000 00000000 c088bf54 c088bf38 c0839200 c083914c 00000006 c0961c4c bf40: c0961c28 00000000 c088bf7c c088bf58 c08392ac c08391c0 c08a2ed8 c0966e78 bf60: c086b874 c08a3f50 c0961c28 00000001 c088bfb4 c088bf80 c083b258 c0839248 bf80: 2f800000 0f000000 c08935b4 ffffffff c08cd400 ffffffff c08cd400 c0868408 bfa0: c29849c0 00000000 c088bff4 c088bfb8 c0824974 c083b1e4 ffffffff ffffffff bfc0: c08245c0 00000000 00000000 c0868408 00000000 10c5387d c0892bcc c0868404 bfe0: c0899440 0000406a 00000000 c088bff8 00008074 c0824824 00000000 00000000 [<c02c6da0>] (strncmp+0x1c/0x84) from [<c0110a3c>] (kmem_cache_flags.isra.46.part.47+0x44/0x60) [<c0110a3c>] (kmem_cache_flags.isra.46.part.47+0x44/0x60) from [<c0112070>] (__kmem_cache_create+0x3c/0x410) [<c0112070>] (__kmem_cache_create+0x3c/0x410) from [<c0839190>] (create_boot_cache+0x50/0x74) [<c0839190>] (create_boot_cache+0x50/0x74) from [<c0839200>] (create_kmalloc_cache+0x4c/0x88) [<c0839200>] (create_kmalloc_cache+0x4c/0x88) from [<c08392ac>] (create_kmalloc_caches+0x70/0x114) [<c08392ac>] (create_kmalloc_caches+0x70/0x114) from [<c083b258>] (kmem_cache_init+0x80/0xe0) [<c083b258>] (kmem_cache_init+0x80/0xe0) from [<c0824974>] (start_kernel+0x15c/0x318) [<c0824974>] (start_kernel+0x15c/0x318) from [<00008074>] (0x8074) Code: e3520000 01a00002 089da800 e5d03000 (e5d1c000) ---[ end trace 1b75b31a2719ed1d ]--- Kernel panic - not syncing: Fatal exception Problem is that slub_debug option is not parsed before create_boot_cache is called. Solve this by changing slub_debug to early_param. Kernels 3.11, 3.10 are also affected. I am not sure about older kernels. Christoph Lameter explains: kmem_cache_flags may be called with NULL parameter during early boot. Skip the test in that case. Cc: stable@vger.kernel.org # 3.10 and 3.11 Reported-by: Andreas Herrmann <andreas.herrmann@calxeda.com> Signed-off-by: Christoph Lameter <cl@linux.com> Signed-off-by: Pekka Enberg <penberg@kernel.org>
2013-10-24slub: proper kmemleak tracking if CONFIG_SLUB_DEBUG disabledRoman Bobniev
Move all kmemleak calls into hook functions, and make it so that all hooks (both inside and outside of #ifdef CONFIG_SLUB_DEBUG) call the appropriate kmemleak routines. This allows for kmemleak to be configured independently of slub debug features. It also fixes a bug where kmemleak was only partially enabled in some configurations. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Christoph Lameter <cl@linux.com> Signed-off-by: Roman Bobniev <Roman.Bobniev@sonymobile.com> Signed-off-by: Tim Bird <tim.bird@sonymobile.com> Signed-off-by: Pekka Enberg <penberg@iki.fi>
2013-10-18mm: Fix some trivial typos in commentsXie XiuQi
Signed-off-by: Xie XiuQi <xiexiuqi@huawei.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-09-15Merge branch 'slab/next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/penberg/linux Pull SLAB update from Pekka Enberg: "Nothing terribly exciting here apart from Christoph's kmalloc unification patches that brings sl[aou]b implementations closer to each other" * 'slab/next' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/linux: slab: Use correct GFP_DMA constant slub: remove verify_mem_not_deleted() mm/sl[aou]b: Move kmallocXXX functions to common code mm, slab_common: add 'unlikely' to size check of kmalloc_slab() mm/slub.c: beautify code for removing redundancy 'break' statement. slub: Remove unnecessary page NULL check slub: don't use cpu partial pages on UP mm/slub: beautify code for 80 column limitation and tab alignment mm/slub: remove 'per_cpu' which is useless variable
2013-09-11mm: replace strict_strtoul() with kstrtoul()Jingoo Han
The use of strict_strtoul() is not preferred, because strict_strtoul() is obsolete. Thus, kstrtoul() should be used. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-04slub: remove verify_mem_not_deleted()Christoph Lameter
I do not see any user for this code in the tree. Signed-off-by: Christoph Lameter <cl@linux.com> Signed-off-by: Pekka Enberg <penberg@kernel.org>
2013-09-04mm/sl[aou]b: Move kmallocXXX functions to common codeChristoph Lameter
The kmalloc* functions of all slab allcoators are similar now so lets move them into slab.h. This requires some function naming changes in slob. As a results of this patch there is a common set of functions for all allocators. Also means that kmalloc_large() is now available in general to perform large order allocations that go directly via the page allocator. kmalloc_large() can be substituted if kmalloc() throws warnings because of too large allocations. kmalloc_large() has exactly the same semantics as kmalloc but can only used for allocations > PAGE_SIZE. Signed-off-by: Christoph Lameter <cl@linux.com> Signed-off-by: Pekka Enberg <penberg@kernel.org>
2013-08-13mm/slub.c: beautify code for removing redundancy 'break' statement.Chen Gang
Remove redundancy 'break' statement. Acked-by: Christoph Lameter <cl@linux.com> Signed-off-by: Chen Gang <gang.chen@asianux.com> Signed-off-by: Pekka Enberg <penberg@kernel.org>
2013-08-13slub: Remove unnecessary page NULL checkLibin
In commit 4d7868e6(slub: Do not dereference NULL pointer in node_match) had added check for page NULL in node_match. Thus, it is not needed to check it before node_match, remove it. Acked-by: Christoph Lameter <cl@linux.com> Signed-off-by: Libin <huawei.libin@huawei.com> Signed-off-by: Pekka Enberg <penberg@kernel.org>
2013-08-08Revert "slub: do not put a slab to cpu partial list when cpu_partial is 0"Linus Torvalds
This reverts commit 318df36e57c0ca9f2146660d41ff28e8650af423. This commit caused Steven Rostedt's hackbench runs to run out of memory due to a leak. As noted by Joonsoo Kim, it is buggy in the following scenario: "I guess, you may set 0 to all kmem caches's cpu_partial via sysfs, doesn't it? In this case, memory leak is possible in following case. Code flow of possible leak is follwing case. * in __slab_free() 1. (!new.inuse || !prior) && !was_frozen 2. !kmem_cache_debug && !prior 3. new.frozen = 1 4. after cmpxchg_double_slab, run the (!n) case with new.frozen=1 5. with this patch, put_cpu_partial() doesn't do anything, because this cache's cpu_partial is 0 6. return In step 5, leak occur" And Steven does indeed have cpu_partial set to 0 due to RT testing. Joonsoo is cooking up a patch, but everybody agrees that reverting this for now is the right thing to do. Reported-and-bisected-by: Steven Rostedt <rostedt@goodmis.org> Acked-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: Pekka Enberg <penberg@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-17mm/slub: beautify code for 80 column limitation and tab alignmentChen Gang
Be sure of 80 column limitation for both code and comments. Correct tab alignment for 'if-else' statement. Acked-by: Christoph Lameter <cl@linux.com> Signed-off-by: Chen Gang <gang.chen@asianux.com> Signed-off-by: Pekka Enberg <penberg@kernel.org>
2013-07-15mm/slub: remove 'per_cpu' which is useless variableChen Gang
Remove 'per_cpu', since it is useless now after the patch: "205ab99 slub: Update statistics handling for variable order slabs". And the partial list is handled in the same way as the per cpu slab. Acked-by: Christoph Lameter <cl@linux.com> Signed-off-by: Chen Gang <gang.chen@asianux.com> Signed-off-by: Pekka Enberg <penberg@kernel.org>