summaryrefslogtreecommitdiff
path: root/mm/zswap.c
AgeCommit message (Collapse)Author
2016-05-21mm/zswap: use workqueue to destroy poolDan Streetman
Add a work_struct to struct zswap_pool, and change __zswap_pool_empty to use the workqueue instead of using call_rcu(). When zswap destroys a pool no longer in use, it uses call_rcu() to perform the destruction/freeing. Since that executes in softirq context, it must not sleep. However, actually destroying the pool involves freeing the per-cpu compressors (which requires locking the cpu_add_remove_lock mutex) and freeing the zpool, for which the implementation may sleep (e.g. zsmalloc calls kmem_cache_destroy, which locks the slab_mutex). So if either mutex is currently taken, or any other part of the compressor or zpool implementation sleeps, it will result in a BUG(). It's not easy to reproduce this when changing zswap's params normally. In testing with a loaded system, this does not fail: $ cd /sys/module/zswap/parameters $ echo lz4 > compressor ; echo zsmalloc > zpool nor does this: $ while true ; do > echo lzo > compressor ; echo zbud > zpool > sleep 1 > echo lz4 > compressor ; echo zsmalloc > zpool > sleep 1 > done although it's still possible either of those might fail, depending on whether anything else besides zswap has locked the mutexes. However, changing a parameter with no delay immediately causes the schedule while atomic BUG: $ while true ; do > echo lzo > compressor ; echo lz4 > compressor > done This is essentially the same as Yu Zhao's proposed patch to zsmalloc, but moved to zswap, to cover compressor and zpool freeing. Fixes: f1c54846ee45 ("zswap: dynamic pool creation") Signed-off-by: Dan Streetman <ddstreet@ieee.org> Reported-by: Yu Zhao <yuzhao@google.com> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Dan Streetman <dan.streetman@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-06mm/zswap: provide unique zpool nameDan Streetman
Instead of using "zswap" as the name for all zpools created, add an atomic counter and use "zswap%x" with the counter number for each zpool created, to provide a unique name for each new zpool. As zsmalloc, one of the zpool implementations, requires/expects a unique name for each pool created, zswap should provide a unique name. The zsmalloc pool creation does not fail if a new pool with a conflicting name is created, unless CONFIG_ZSMALLOC_STAT is enabled; in that case, zsmalloc pool creation fails with -ENOMEM. Then zswap will be unable to change its compressor parameter if its zpool is zsmalloc; it also will be unable to change its zpool parameter back to zsmalloc, if it has any existing old zpool using zsmalloc with page(s) in it. Attempts to change the parameters will result in failure to create the zpool. This changes zswap to provide a unique name for each zpool creation. Fixes: f1c54846ee45 ("zswap: dynamic pool creation") Signed-off-by: Dan Streetman <ddstreet@ieee.org> Reported-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Dan Streetman <dan.streetman@canonical.com> Cc: Minchan Kim <minchan@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-04mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macrosKirill A. Shutemov
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-12-18mm/zswap: change incorrect strncmp use to strcmpDan Streetman
Change the use of strncmp in zswap_pool_find_get() to strcmp. The use of strncmp is no longer correct, now that zswap_zpool_type is not an array; sizeof() will return the size of a pointer, which isn't the right length to compare. We don't need to use strncmp anyway, because the existing params and the passed in params are all guaranteed to be null terminated, so strcmp should be used. Signed-off-by: Dan Streetman <ddstreet@ieee.org> Reported-by: Weijie Yang <weijie.yang@samsung.com> Cc: Seth Jennings <sjennings@variantweb.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-07zswap: use charp for zswap param stringsDan Streetman
Instead of using a fixed-length string for the zswap params, use charp. This simplifies the code and uses less memory, as most zswap param strings will be less than the current maximum length. Signed-off-by: Dan Streetman <ddstreet@ieee.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Seth Jennings <sjennings@variantweb.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-07mm/zswap.c: remove unneeded initialization to NULL in zswap_entry_find_get()Alexey Klimov
On the next line entry variable will be re-initialized so no need to init it with NULL. Signed-off-by: Alexey Klimov <alexey.klimov@linaro.org> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-07mm, page_alloc: distinguish between being unable to sleep, unwilling to ↵Mel Gorman
sleep and avoiding waking kswapd __GFP_WAIT has been used to identify atomic context in callers that hold spinlocks or are in interrupts. They are expected to be high priority and have access one of two watermarks lower than "min" which can be referred to as the "atomic reserve". __GFP_HIGH users get access to the first lower watermark and can be called the "high priority reserve". Over time, callers had a requirement to not block when fallback options were available. Some have abused __GFP_WAIT leading to a situation where an optimisitic allocation with a fallback option can access atomic reserves. This patch uses __GFP_ATOMIC to identify callers that are truely atomic, cannot sleep and have no alternative. High priority users continue to use __GFP_HIGH. __GFP_DIRECT_RECLAIM identifies callers that can sleep and are willing to enter direct reclaim. __GFP_KSWAPD_RECLAIM to identify callers that want to wake kswapd for background reclaim. __GFP_WAIT is redefined as a caller that is willing to enter direct reclaim and wake kswapd for background reclaim. This patch then converts a number of sites o __GFP_ATOMIC is used by callers that are high priority and have memory pools for those requests. GFP_ATOMIC uses this flag. o Callers that have a limited mempool to guarantee forward progress clear __GFP_DIRECT_RECLAIM but keep __GFP_KSWAPD_RECLAIM. bio allocations fall into this category where kswapd will still be woken but atomic reserves are not used as there is a one-entry mempool to guarantee progress. o Callers that are checking if they are non-blocking should use the helper gfpflags_allow_blocking() where possible. This is because checking for __GFP_WAIT as was done historically now can trigger false positives. Some exceptions like dm-crypt.c exist where the code intent is clearer if __GFP_DIRECT_RECLAIM is used instead of the helper due to flag manipulations. o Callers that built their own GFP flags instead of starting with GFP_KERNEL and friends now also need to specify __GFP_KSWAPD_RECLAIM. The first key hazard to watch out for is callers that removed __GFP_WAIT and was depending on access to atomic reserves for inconspicuous reasons. In some cases it may be appropriate for them to use __GFP_HIGH. The second key hazard is callers that assembled their own combination of GFP flags instead of starting with something like GFP_KERNEL. They may now wish to specify __GFP_KSWAPD_RECLAIM. It's almost certainly harmless if it's missed in most cases as other activity will wake kswapd. Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Vitaly Wool <vitalywool@gmail.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-10zswap: change zpool/compressor at runtimeDan Streetman
Update the zpool and compressor parameters to be changeable at runtime. When changed, a new pool is created with the requested zpool/compressor, and added as the current pool at the front of the pool list. Previous pools remain in the list only to remove existing compressed pages from. The old pool(s) are removed once they become empty. Signed-off-by: Dan Streetman <ddstreet@ieee.org> Acked-by: Seth Jennings <sjennings@variantweb.net> Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-10zswap: dynamic pool creationDan Streetman
Add dynamic creation of pools. Move the static crypto compression per-cpu transforms into each pool. Add a pointer to zswap_entry to the pool it's in. This is required by the following patch which enables changing the zswap zpool and compressor params at runtime. [akpm@linux-foundation.org: fix merge snafus] Signed-off-by: Dan Streetman <ddstreet@ieee.org> Acked-by: Seth Jennings <sjennings@variantweb.net> Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-08mm: zpool: constify the zpool_opsKrzysztof Kozlowski
The structure zpool_ops is not modified so make the pointer to it a pointer to const. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Dan Streetman <ddstreet@ieee.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-08mm: swap: zswap: maybe_preload & refactoringDmitry Safonov
zswap_get_swap_cache_page and read_swap_cache_async have pretty much the same code with only significant difference in return value and usage of swap_readpage. I a helper __read_swap_cache_async() with the common code. Behavior change: now zswap_get_swap_cache_page will use radix_tree_maybe_preload instead radix_tree_preload. Looks like, this wasn't changed only by the reason of code duplication. Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vladimir Davydov <vdavydov@parallels.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@fb.com> Cc: Christoph Hellwig <hch@lst.de> Cc: David Herrmann <dh.herrmann@gmail.com> Cc: Seth Jennings <sjennings@variantweb.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-26zswap: runtime enable/disableDan Streetman
Change the "enabled" parameter to be configurable at runtime. Remove the enabled check from init(), and move it to the frontswap store() function; when enabled, pages will be stored, and when disabled, pages won't be stored. This is almost identical to Seth's patch from 2 years ago: http://lkml.iu.edu/hypermail/linux/kernel/1307.2/04289.html [akpm@linux-foundation.org: tweak documentation] Signed-off-by: Dan Streetman <ddstreet@ieee.org> Suggested-by: Seth Jennings <sjennings@variantweb.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-13mm/zpool: add name argument to create zpoolGanesh Mahendran
Currently the underlay of zpool: zsmalloc/zbud, do not know who creates them. There is not a method to let zsmalloc/zbud find which caller they belong to. Now we want to add statistics collection in zsmalloc. We need to name the debugfs dir for each pool created. The way suggested by Minchan Kim is to use a name passed by caller(such as zram) to create the zsmalloc pool. /sys/kernel/debug/zsmalloc/zram0 This patch adds an argument `name' to zs_create_pool() and other related functions. Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Dan Streetman <ddstreet@ieee.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13mm/zswap: delete unnecessary check before calling free_percpu()Markus Elfring
free_percpu() tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Cc: Seth Jennings <sjennings@variantweb.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13mm/zswap: add __init to some functions in zswapMahendran Ganesh
zswap_cpu_init/zswap_comp_exit/zswap_entry_cache_create is only called by __init init_zswap() Signed-off-by: Mahendran Ganesh <opensource.ganesh@gmail.com> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-11-20Merge Linus' tree to be be to apply submitted patches to newer code thanJiri Kosina
current trivial.git base
2014-11-13zbud, zswap: change module author emailSeth Jennings
Old email no longer viable. Signed-off-by: Seth Jennings <sjennings@variantweb.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-08-08mm/zswap.c: add __init to zswap_entry_cache_destroy()Fabian Frederick
zswap_entry_cache_destroy() is only called by __init init_zswap(). This patch also fixes function name zswap_entry_cache_ s/destory/destroy Signed-off-by: Fabian Frederick <fabf@skynet.be> Acked-by: Seth Jennings <sjennings@variantweb.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-08mm: memcontrol: rewrite uncharge APIJohannes Weiner
The memcg uncharging code that is involved towards the end of a page's lifetime - truncation, reclaim, swapout, migration - is impressively complicated and fragile. Because anonymous and file pages were always charged before they had their page->mapping established, uncharges had to happen when the page type could still be known from the context; as in unmap for anonymous, page cache removal for file and shmem pages, and swap cache truncation for swap pages. However, these operations happen well before the page is actually freed, and so a lot of synchronization is necessary: - Charging, uncharging, page migration, and charge migration all need to take a per-page bit spinlock as they could race with uncharging. - Swap cache truncation happens during both swap-in and swap-out, and possibly repeatedly before the page is actually freed. This means that the memcg swapout code is called from many contexts that make no sense and it has to figure out the direction from page state to make sure memory and memory+swap are always correctly charged. - On page migration, the old page might be unmapped but then reused, so memcg code has to prevent untimely uncharging in that case. Because this code - which should be a simple charge transfer - is so special-cased, it is not reusable for replace_page_cache(). But now that charged pages always have a page->mapping, introduce mem_cgroup_uncharge(), which is called after the final put_page(), when we know for sure that nobody is looking at the page anymore. For page migration, introduce mem_cgroup_migrate(), which is called after the migration is successful and the new page is fully rmapped. Because the old page is no longer uncharged after migration, prevent double charges by decoupling the page's memcg association (PCG_USED and pc->mem_cgroup) from the page holding an actual charge. The new bits PCG_MEM and PCG_MEMSW represent the respective charges and are transferred to the new page during migration. mem_cgroup_migrate() is suitable for replace_page_cache() as well, which gets rid of mem_cgroup_replace_page_cache(). However, care needs to be taken because both the source and the target page can already be charged and on the LRU when fuse is splicing: grab the page lock on the charge moving side to prevent changing pc->mem_cgroup of a page under migration. Also, the lruvecs of both pages change as we uncharge the old and charge the new during migration, and putback may race with us, so grab the lru lock and isolate the pages iff on LRU to prevent races and ensure the pages are on the right lruvec afterward. Swap accounting is massively simplified: because the page is no longer uncharged as early as swap cache deletion, a new mem_cgroup_swapout() can transfer the page's memory+swap charge (PCG_MEMSW) to the swap entry before the final put_page() in page reclaim. Finally, page_cgroup changes are now protected by whatever protection the page itself offers: anonymous pages are charged under the page table lock, whereas page cache insertions, swapin, and migration hold the page lock. Uncharging happens under full exclusion with no outstanding references. Charging and uncharging also ensure that the page is off-LRU, which serializes against charge migration. Remove the very costly page_cgroup lock and set pc->flags non-atomically. [mhocko@suse.cz: mem_cgroup_charge_statistics needs preempt_disable] [vdavydov@parallels.com: fix flags definition] Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Hugh Dickins <hughd@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vladimir Davydov <vdavydov@parallels.com> Tested-by: Jet Chen <jet.chen@intel.com> Acked-by: Michal Hocko <mhocko@suse.cz> Tested-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-07mm/zpool: update zswap to use zpoolDan Streetman
Change zswap to use the zpool api instead of directly using zbud. Add a boot-time param to allow selecting which zpool implementation to use, with zbud as the default. Signed-off-by: Dan Streetman <ddstreet@ieee.org> Tested-by: Seth Jennings <sjennings@variantweb.net> Cc: Weijie Yang <weijie.yang@samsung.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04mm/zswap: NUMA aware allocation for zswap_dstmemEric Dumazet
zswap_dstmem is a percpu block of memory, which should be allocated using kmalloc_node(), to get better NUMA locality. Without it, all the blocks are allocated from a single node. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Seth Jennings <sjennings@variantweb.net> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07Merge branch 'akpm' (incoming from Andrew)Linus Torvalds
Merge second patch-bomb from Andrew Morton: - the rest of MM - zram updates - zswap updates - exit - procfs - exec - wait - crash dump - lib/idr - rapidio - adfs, affs, bfs, ufs - cris - Kconfig things - initramfs - small amount of IPC material - percpu enhancements - early ioremap support - various other misc things * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (156 commits) MAINTAINERS: update Intel C600 SAS driver maintainers fs/ufs: remove unused ufs_super_block_third pointer fs/ufs: remove unused ufs_super_block_second pointer fs/ufs: remove unused ufs_super_block_first pointer fs/ufs/super.c: add __init to init_inodecache() doc/kernel-parameters.txt: add early_ioremap_debug arm64: add early_ioremap support arm64: initialize pgprot info earlier in boot x86: use generic early_ioremap mm: create generic early_ioremap() support x86/mm: sparse warning fix for early_memremap lglock: map to spinlock when !CONFIG_SMP percpu: add preemption checks to __this_cpu ops vmstat: use raw_cpu_ops to avoid false positives on preemption checks slub: use raw_cpu_inc for incrementing statistics net: replace __this_cpu_inc in route.c with raw_cpu_inc modules: use raw_cpu_write for initialization of per cpu refcount. mm: use raw_cpu ops for determining current NUMA node percpu: add raw_cpu_ops slub: fix leak of 'name' in sysfs_slab_add ...
2014-04-07mm/zswap.c: remove unnecessary parenthesesSeongJae Park
Fix following trivial checkpatch error: ERROR: return is not a function, parentheses are not required Signed-off-by: SeongJae Park <sj38.park@gmail.com> Acked-by: Seth Jennings <sjennings@variantweb.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07mm/zswap: support multiple swap devicesMinchan Kim
Cai Liu reporeted that now zbud pool pages counting has a problem when multiple swap is used because it just counts only one swap intead of all of swap so zswap cannot control writeback properly. The result is unnecessary writeback or no writeback when we should really writeback. IOW, it made zswap crazy. Another problem in zswap is: For example, let's assume we use two swap A and B with different priority and A already has charged 19% long time ago and let's assume that A swap is full now so VM start to use B so that B has charged 1% recently. It menas zswap charged (19% + 1%) is full by default. Then, if VM want to swap out more pages into B, zbud_reclaim_page would be evict one of pages in B's pool and it would be repeated continuously. It's totally LRU reverse problem and swap thrashing in B would happen. This patch makes zswap consider mutliple swap by creating *a* zbud pool which will be shared by multiple swap so all of zswap pages in multiple swap keep order by LRU so it can prevent above two problems. Signed-off-by: Minchan Kim <minchan@kernel.org> Reported-by: Cai Liu <cai.liu@samsung.com> Suggested-by: Weijie Yang <weijie.yang.kh@gmail.com> Cc: Seth Jennings <sjennings@variantweb.net> Reviewed-by: Bob Liu <bob.liu@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07mm/zswap.c: update zsmalloc in comment to zbudSeongJae Park
zswap used zsmalloc before and now using zbud. But, some comments saying it use zsmalloc yet. Fix the trivial problems. Signed-off-by: SeongJae Park <sj38.park@gmail.com> Cc: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07mm/zswap.c: fix trivial typo and arrange indentationSeongJae Park
Signed-off-by: SeongJae Park <sj38.park@gmail.com> Cc: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-03-20mm, zswap: Fix CPU hotplug callback registrationSrivatsa S. Bhat
Subsystems that want to register CPU hotplug callbacks, as well as perform initialization for the CPUs that are already online, often do it as shown below: get_online_cpus(); for_each_online_cpu(cpu) init_cpu(cpu); register_cpu_notifier(&foobar_cpu_notifier); put_online_cpus(); This is wrong, since it is prone to ABBA deadlocks involving the cpu_add_remove_lock and the cpu_hotplug.lock (when running concurrently with CPU hotplug operations). Instead, the correct and race-free way of performing the callback registration is: cpu_notifier_register_begin(); for_each_online_cpu(cpu) init_cpu(cpu); /* Note the use of the double underscored version of the API */ __register_cpu_notifier(&foobar_cpu_notifier); cpu_notifier_register_done(); Fix the zswap code by using this latter form of callback registration. Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-01-24mm/zswap.c: change params from hidden to roDan Streetman
The "compressor" and "enabled" params are currently hidden, this changes them to read-only, so userspace can tell if zswap is enabled or not and see what compressor is in use. Signed-off-by: Dan Streetman <ddstreet@ieee.org> Cc: Vladimir Murzin <murzin.v@gmail.com> Cc: Bob Liu <bob.liu@oracle.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Weijie Yang <weijie.yang@samsung.com> Acked-by: Seth Jennings <sjennings@variantweb.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13mm/zswap: refactor the get/put routinesWeijie Yang
The refcount routine was not fit the kernel get/put semantic exactly, There were too many judgement statements on refcount and it could be minus. This patch does the following: - move refcount judgement to zswap_entry_put() to hide resource free function. - add a new function zswap_entry_find_get(), so that callers can use easily in the following pattern: zswap_entry_find_get .../* do something */ zswap_entry_put - to eliminate compile error, move some functions declaration This patch is based on Minchan Kim <minchan@kernel.org> 's idea and suggestion. Signed-off-by: Weijie Yang <weijie.yang@samsung.com> Cc: Seth Jennings <sjennings@variantweb.net> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Bob Liu <bob.liu@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13mm/zswap: bugfix: memory leak when invalidate and reclaim occur concurrentlyWeijie Yang
Consider the following scenario: thread 0: reclaim entry x (get refcount, but not call zswap_get_swap_cache_page) thread 1: call zswap_frontswap_invalidate_page to invalidate entry x. finished, entry x and its zbud is not freed as its refcount != 0 now, the swap_map[x] = 0 thread 0: now call zswap_get_swap_cache_page swapcache_prepare return -ENOENT because entry x is not used any more zswap_get_swap_cache_page return ZSWAP_SWAPCACHE_NOMEM zswap_writeback_entry do nothing except put refcount Now, the memory of zswap_entry x and its zpage leak. Modify: - check the refcount in fail path, free memory if it is not referenced. - use ZSWAP_SWAPCACHE_FAIL instead of ZSWAP_SWAPCACHE_NOMEM as the fail path can be not only caused by nomem but also by invalidate. Signed-off-by: Weijie Yang <weijie.yang@samsung.com> Reviewed-by: Bob Liu <bob.liu@oracle.com> Reviewed-by: Minchan Kim <minchan@kernel.org> Acked-by: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13mm/zswap: avoid unnecessary page scanningWeijie Yang
Add SetPageReclaim() before __swap_writepage() so that page can be moved to the tail of the inactive list, which can avoid unnecessary page scanning as this page was reclaimed by swap subsystem before. Signed-off-by: Weijie Yang <weijie.yang@samsung.com> Reviewed-by: Bob Liu <bob.liu@oracle.com> Reviewed-by: Minchan Kim <minchan@kernel.org> Acked-by: Seth Jennings <sjenning@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-10-17mm/zswap: bugfix: memory leak when re-swaponWeijie Yang
zswap_tree is not freed when swapoff, and it got re-kmalloced in swapon, so a memory leak occurs. Free the memory of zswap_tree in zswap_frontswap_invalidate_area(). Signed-off-by: Weijie Yang <weijie.yang@samsung.com> Reviewed-by: Bob Liu <bob.liu@oracle.com> Cc: Minchan Kim <minchan@kernel.org> Reviewed-by: Minchan Kim <minchan@kernel.org> Cc: <stable@vger.kernel.org> From: Weijie Yang <weijie.yang@samsung.com> Subject: mm/zswap: bugfix: memory leak when invalidate and reclaim occur concurrently Consider the following scenario: thread 0: reclaim entry x (get refcount, but not call zswap_get_swap_cache_page) thread 1: call zswap_frontswap_invalidate_page to invalidate entry x. finished, entry x and its zbud is not freed as its refcount != 0 now, the swap_map[x] = 0 thread 0: now call zswap_get_swap_cache_page swapcache_prepare return -ENOENT because entry x is not used any more zswap_get_swap_cache_page return ZSWAP_SWAPCACHE_NOMEM zswap_writeback_entry do nothing except put refcount Now, the memory of zswap_entry x and its zpage leak. Modify: - check the refcount in fail path, free memory if it is not referenced. - use ZSWAP_SWAPCACHE_FAIL instead of ZSWAP_SWAPCACHE_NOMEM as the fail path can be not only caused by nomem but also by invalidate. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Weijie Yang <weijie.yang@samsung.com> Reviewed-by: Bob Liu <bob.liu@oracle.com> Cc: Minchan Kim <minchan@kernel.org> Cc: <stable@vger.kernel.org> Acked-by: Seth Jennings <sjenning@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11mm/zswap: use postorder iteration when destroying rbtreeCody P Schafer
Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com> Reviewed-by: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: David Woodhouse <David.Woodhouse@intel.com> Cc: Rik van Riel <riel@redhat.com> Cc: Michel Lespinasse <walken@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11mm/zswap.c: get swapper address_space by using macroSunghan Suh
There is a proper macro to get the corresponding swapper address space from a swap entry. Instead of directly accessing "swapper_spaces" array, use the "swap_address_space" macro. Signed-off-by: Sunghan Suh <sunghan.suh@samsung.com> Reviewed-by: Bob Liu <bob.liu@oracle.com> Reviewed-by: Wanpeng Li <liwanp@linux.vnet.ibm.com> Acked-by: Seth Jennings <sjenning@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-11zswap: add to mm/Seth Jennings
zswap is a thin backend for frontswap that takes pages that are in the process of being swapped out and attempts to compress them and store them in a RAM-based memory pool. This can result in a significant I/O reduction on the swap device and, in the case where decompressing from RAM is faster than reading from the swap device, can also improve workload performance. It also has support for evicting swap pages that are currently compressed in zswap to the swap device on an LRU(ish) basis. This functionality makes zswap a true cache in that, once the cache is full, the oldest pages can be moved out of zswap to the swap device so newer pages can be compressed and stored in zswap. This patch adds the zswap driver to mm/ Signed-off-by: Seth Jennings <sjenning@linux.vnet.ibm.com> Acked-by: Rik van Riel <riel@redhat.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Dan Magenheimer <dan.magenheimer@oracle.com> Cc: Robert Jennings <rcj@linux.vnet.ibm.com> Cc: Jenifer Hopper <jhopper@us.ibm.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <jweiner@redhat.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Dave Hansen <dave@sr71.net> Cc: Joe Perches <joe@perches.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Cody P Schafer <cody@linux.vnet.ibm.com> Cc: Hugh Dickens <hughd@google.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>