summaryrefslogtreecommitdiff
path: root/mm
AgeCommit message (Collapse)Author
2015-03-25Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge misc fixes from Andrew Morton: "15 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mm: numa: mark huge PTEs young when clearing NUMA hinting faults mm: numa: slow PTE scan rate if migration failures occur mm: numa: preserve PTE write permissions across a NUMA hinting fault mm: numa: group related processes based on VMA flags instead of page table flags hfsplus: fix B-tree corruption after insertion at position 0 MAINTAINERS: add Jan as DMI/SMBIOS support maintainer fs/affs/file.c: unlock/release page on error mm/page_alloc.c: call kernel_map_pages in unset_migrateype_isolate mm/slub: fix lockups on PREEMPT && !SMP kernels mm/memory hotplug: postpone the reset of obsolete pgdat MAINTAINERS: correct rtc armada38x pattern entry mm/pagewalk.c: prevent positive return value of walk_page_test() from being passed to callers mm: fix anon_vma->degree underflow in anon_vma endless growing prevention drivers/rtc/rtc-mrst: fix suspend/resume aoe: update aoe maintainer information
2015-03-25mm: numa: mark huge PTEs young when clearing NUMA hinting faultsMel Gorman
Base PTEs are marked young when the NUMA hinting information is cleared but the same does not happen for huge pages which this patch addresses. Note that migrated pages are not marked young as the base page migration code does not assume that migrated pages have been referenced. This could be addressed but beyond the scope of this series which is aimed at Dave Chinners shrink workload that is unlikely to be affected by this issue. Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Dave Chinner <david@fromorbit.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-03-25mm: numa: slow PTE scan rate if migration failures occurMel Gorman
Dave Chinner reported the following on https://lkml.org/lkml/2015/3/1/226 Across the board the 4.0-rc1 numbers are much slower, and the degradation is far worse when using the large memory footprint configs. Perf points straight at the cause - this is from 4.0-rc1 on the "-o bhash=101073" config: - 56.07% 56.07% [kernel] [k] default_send_IPI_mask_sequence_phys - default_send_IPI_mask_sequence_phys - 99.99% physflat_send_IPI_mask - 99.37% native_send_call_func_ipi smp_call_function_many - native_flush_tlb_others - 99.85% flush_tlb_page ptep_clear_flush try_to_unmap_one rmap_walk try_to_unmap migrate_pages migrate_misplaced_page - handle_mm_fault - 99.73% __do_page_fault trace_do_page_fault do_async_page_fault + async_page_fault 0.63% native_send_call_func_single_ipi generic_exec_single smp_call_function_single This is showing excessive migration activity even though excessive migrations are meant to get throttled. Normally, the scan rate is tuned on a per-task basis depending on the locality of faults. However, if migrations fail for any reason then the PTE scanner may scan faster if the faults continue to be remote. This means there is higher system CPU overhead and fault trapping at exactly the time we know that migrations cannot happen. This patch tracks when migration failures occur and slows the PTE scanner. Signed-off-by: Mel Gorman <mgorman@suse.de> Reported-by: Dave Chinner <david@fromorbit.com> Tested-by: Dave Chinner <david@fromorbit.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-03-25mm: numa: preserve PTE write permissions across a NUMA hinting faultMel Gorman
Protecting a PTE to trap a NUMA hinting fault clears the writable bit and further faults are needed after trapping a NUMA hinting fault to set the writable bit again. This patch preserves the writable bit when trapping NUMA hinting faults. The impact is obvious from the number of minor faults trapped during the basis balancing benchmark and the system CPU usage; autonumabench 4.0.0-rc4 4.0.0-rc4 baseline preserve Time System-NUMA01 107.13 ( 0.00%) 103.13 ( 3.73%) Time System-NUMA01_THEADLOCAL 131.87 ( 0.00%) 83.30 ( 36.83%) Time System-NUMA02 8.95 ( 0.00%) 10.72 (-19.78%) Time System-NUMA02_SMT 4.57 ( 0.00%) 3.99 ( 12.69%) Time Elapsed-NUMA01 515.78 ( 0.00%) 517.26 ( -0.29%) Time Elapsed-NUMA01_THEADLOCAL 384.10 ( 0.00%) 384.31 ( -0.05%) Time Elapsed-NUMA02 48.86 ( 0.00%) 48.78 ( 0.16%) Time Elapsed-NUMA02_SMT 47.98 ( 0.00%) 48.12 ( -0.29%) 4.0.0-rc4 4.0.0-rc4 baseline preserve User 44383.95 43971.89 System 252.61 201.24 Elapsed 998.68 1000.94 Minor Faults 2597249 1981230 Major Faults 365 364 There is a similar drop in system CPU usage using Dave Chinner's xfsrepair workload 4.0.0-rc4 4.0.0-rc4 baseline preserve Amean real-xfsrepair 454.14 ( 0.00%) 442.36 ( 2.60%) Amean syst-xfsrepair 277.20 ( 0.00%) 204.68 ( 26.16%) The patch looks hacky but the alternatives looked worse. The tidest was to rewalk the page tables after a hinting fault but it was more complex than this approach and the performance was worse. It's not generally safe to just mark the page writable during the fault if it's a write fault as it may have been read-only for COW so that approach was discarded. Signed-off-by: Mel Gorman <mgorman@suse.de> Reported-by: Dave Chinner <david@fromorbit.com> Tested-by: Dave Chinner <david@fromorbit.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-03-25mm: numa: group related processes based on VMA flags instead of page table flagsMel Gorman
These are three follow-on patches based on the xfsrepair workload Dave Chinner reported was problematic in 4.0-rc1 due to changes in page table management -- https://lkml.org/lkml/2015/3/1/226. Much of the problem was reduced by commit 53da3bc2ba9e ("mm: fix up numa read-only thread grouping logic") and commit ba68bc0115eb ("mm: thp: Return the correct value for change_huge_pmd"). It was known that the performance in 3.19 was still better even if is far less safe. This series aims to restore the performance without compromising on safety. For the test of this mail, I'm comparing 3.19 against 4.0-rc4 and the three patches applied on top autonumabench 3.19.0 4.0.0-rc4 4.0.0-rc4 4.0.0-rc4 4.0.0-rc4 vanilla vanilla vmwrite-v5r8 preserve-v5r8 slowscan-v5r8 Time System-NUMA01 124.00 ( 0.00%) 161.86 (-30.53%) 107.13 ( 13.60%) 103.13 ( 16.83%) 145.01 (-16.94%) Time System-NUMA01_THEADLOCAL 115.54 ( 0.00%) 107.64 ( 6.84%) 131.87 (-14.13%) 83.30 ( 27.90%) 92.35 ( 20.07%) Time System-NUMA02 9.35 ( 0.00%) 10.44 (-11.66%) 8.95 ( 4.28%) 10.72 (-14.65%) 8.16 ( 12.73%) Time System-NUMA02_SMT 3.87 ( 0.00%) 4.63 (-19.64%) 4.57 (-18.09%) 3.99 ( -3.10%) 3.36 ( 13.18%) Time Elapsed-NUMA01 570.06 ( 0.00%) 567.82 ( 0.39%) 515.78 ( 9.52%) 517.26 ( 9.26%) 543.80 ( 4.61%) Time Elapsed-NUMA01_THEADLOCAL 393.69 ( 0.00%) 384.83 ( 2.25%) 384.10 ( 2.44%) 384.31 ( 2.38%) 380.73 ( 3.29%) Time Elapsed-NUMA02 49.09 ( 0.00%) 49.33 ( -0.49%) 48.86 ( 0.47%) 48.78 ( 0.63%) 50.94 ( -3.77%) Time Elapsed-NUMA02_SMT 47.51 ( 0.00%) 47.15 ( 0.76%) 47.98 ( -0.99%) 48.12 ( -1.28%) 49.56 ( -4.31%) 3.19.0 4.0.0-rc4 4.0.0-rc4 4.0.0-rc4 4.0.0-rc4 vanilla vanillavmwrite-v5r8preserve-v5r8slowscan-v5r8 User 46334.60 46391.94 44383.95 43971.89 44372.12 System 252.84 284.66 252.61 201.24 249.00 Elapsed 1062.14 1050.96 998.68 1000.94 1026.78 Overall the system CPU usage is comparable and the test is naturally a bit variable. The slowing of the scanner hurts numa01 but on this machine it is an adverse workload and patches that dramatically help it often hurt absolutely everything else. Due to patch 2, the fault activity is interesting 3.19.0 4.0.0-rc4 4.0.0-rc4 4.0.0-rc4 4.0.0-rc4 vanilla vanillavmwrite-v5r8preserve-v5r8slowscan-v5r8 Minor Faults 2097811 2656646 2597249 1981230 1636841 Major Faults 362 450 365 364 365 Note the impact preserving the write bit across protection updates and fault reduces faults. NUMA alloc hit 1229008 1217015 1191660 1178322 1199681 NUMA alloc miss 0 0 0 0 0 NUMA interleave hit 0 0 0 0 0 NUMA alloc local 1228514 1216317 1190871 1177448 1199021 NUMA base PTE updates 245706197 240041607 238195516 244704842 115012800 NUMA huge PMD updates 479530 468448 464868 477573 224487 NUMA page range updates 491225557 479886983 476207932 489222218 229950144 NUMA hint faults 659753 656503 641678 656926 294842 NUMA hint local faults 381604 373963 360478 337585 186249 NUMA hint local percent 57 56 56 51 63 NUMA pages migrated 5412140 6374899 6266530 5277468 5755096 AutoNUMA cost 5121% 5083% 4994% 5097% 2388% Here the impact of slowing the PTE scanner on migratrion failures is obvious as "NUMA base PTE updates" and "NUMA huge PMD updates" are massively reduced even though the headline performance is very similar. As xfsrepair was the reported workload here is the impact of the series on it. xfsrepair 3.19.0 4.0.0-rc4 4.0.0-rc4 4.0.0-rc4 4.0.0-rc4 vanilla vanilla vmwrite-v5r8 preserve-v5r8 slowscan-v5r8 Min real-fsmark 1183.29 ( 0.00%) 1165.73 ( 1.48%) 1152.78 ( 2.58%) 1153.64 ( 2.51%) 1177.62 ( 0.48%) Min syst-fsmark 4107.85 ( 0.00%) 4027.75 ( 1.95%) 3986.74 ( 2.95%) 3979.16 ( 3.13%) 4048.76 ( 1.44%) Min real-xfsrepair 441.51 ( 0.00%) 463.96 ( -5.08%) 449.50 ( -1.81%) 440.08 ( 0.32%) 439.87 ( 0.37%) Min syst-xfsrepair 195.76 ( 0.00%) 278.47 (-42.25%) 262.34 (-34.01%) 203.70 ( -4.06%) 143.64 ( 26.62%) Amean real-fsmark 1188.30 ( 0.00%) 1177.34 ( 0.92%) 1157.97 ( 2.55%) 1158.21 ( 2.53%) 1182.22 ( 0.51%) Amean syst-fsmark 4111.37 ( 0.00%) 4055.70 ( 1.35%) 3987.19 ( 3.02%) 3998.72 ( 2.74%) 4061.69 ( 1.21%) Amean real-xfsrepair 450.88 ( 0.00%) 468.32 ( -3.87%) 454.14 ( -0.72%) 442.36 ( 1.89%) 440.59 ( 2.28%) Amean syst-xfsrepair 199.66 ( 0.00%) 290.60 (-45.55%) 277.20 (-38.84%) 204.68 ( -2.51%) 150.55 ( 24.60%) Stddev real-fsmark 4.12 ( 0.00%) 10.82 (-162.29%) 4.14 ( -0.28%) 5.98 (-45.05%) 4.60 (-11.53%) Stddev syst-fsmark 2.63 ( 0.00%) 20.32 (-671.82%) 0.37 ( 85.89%) 16.47 (-525.59%) 15.05 (-471.79%) Stddev real-xfsrepair 6.87 ( 0.00%) 4.55 ( 33.75%) 3.46 ( 49.58%) 1.78 ( 74.12%) 0.52 ( 92.50%) Stddev syst-xfsrepair 3.02 ( 0.00%) 10.30 (-241.37%) 13.17 (-336.37%) 0.71 ( 76.63%) 5.00 (-65.61%) CoeffVar real-fsmark 0.35 ( 0.00%) 0.92 (-164.73%) 0.36 ( -2.91%) 0.52 (-48.82%) 0.39 (-12.10%) CoeffVar syst-fsmark 0.06 ( 0.00%) 0.50 (-682.41%) 0.01 ( 85.45%) 0.41 (-543.22%) 0.37 (-478.78%) CoeffVar real-xfsrepair 1.52 ( 0.00%) 0.97 ( 36.21%) 0.76 ( 49.94%) 0.40 ( 73.62%) 0.12 ( 92.33%) CoeffVar syst-xfsrepair 1.51 ( 0.00%) 3.54 (-134.54%) 4.75 (-214.31%) 0.34 ( 77.20%) 3.32 (-119.63%) Max real-fsmark 1193.39 ( 0.00%) 1191.77 ( 0.14%) 1162.90 ( 2.55%) 1166.66 ( 2.24%) 1188.50 ( 0.41%) Max syst-fsmark 4114.18 ( 0.00%) 4075.45 ( 0.94%) 3987.65 ( 3.08%) 4019.45 ( 2.30%) 4082.80 ( 0.76%) Max real-xfsrepair 457.80 ( 0.00%) 474.60 ( -3.67%) 457.82 ( -0.00%) 444.42 ( 2.92%) 441.03 ( 3.66%) Max syst-xfsrepair 203.11 ( 0.00%) 303.65 (-49.50%) 294.35 (-44.92%) 205.33 ( -1.09%) 155.28 ( 23.55%) The really relevant lines as syst-xfsrepair which is the system CPU usage when running xfsrepair. Note that on my machine the overhead was 45% higher on 4.0-rc4 which may be part of what Dave is seeing. Once we preserve the write bit across faults, it's only 2.51% higher on average. With the full series applied, system CPU usage is 24.6% lower on average. Again, the impact of preserving the write bit on minor faults is obvious and the impact of slowing scanning after migration failures is obvious on the PTE updates. Note also that the number of pages migrated is much reduced even though the headline performance is comparable. 3.19.0 4.0.0-rc4 4.0.0-rc4 4.0.0-rc4 4.0.0-rc4 vanilla vanillavmwrite-v5r8preserve-v5r8slowscan-v5r8 Minor Faults 153466827 254507978 249163829 153501373 105737890 Major Faults 610 702 690 649 724 NUMA base PTE updates 217735049 210756527 217729596 216937111 144344993 NUMA huge PMD updates 129294 85044 106921 127246 79887 NUMA pages migrated 21938995 29705270 28594162 22687324 16258075 3.19.0 4.0.0-rc4 4.0.0-rc4 4.0.0-rc4 4.0.0-rc4 vanilla vanillavmwrite-v5r8preserve-v5r8slowscan-v5r8 Mean sdb-avgqusz 13.47 2.54 2.55 2.47 2.49 Mean sdb-avgrqsz 202.32 140.22 139.50 139.02 138.12 Mean sdb-await 25.92 5.09 5.33 5.02 5.22 Mean sdb-r_await 4.71 0.19 0.83 0.51 0.11 Mean sdb-w_await 104.13 5.21 5.38 5.05 5.32 Mean sdb-svctm 0.59 0.13 0.14 0.13 0.14 Mean sdb-rrqm 0.16 0.00 0.00 0.00 0.00 Mean sdb-wrqm 3.59 1799.43 1826.84 1812.21 1785.67 Max sdb-avgqusz 111.06 12.13 14.05 11.66 15.60 Max sdb-avgrqsz 255.60 190.34 190.01 187.33 191.78 Max sdb-await 168.24 39.28 49.22 44.64 65.62 Max sdb-r_await 660.00 52.00 280.00 76.00 12.00 Max sdb-w_await 7804.00 39.28 49.22 44.64 65.62 Max sdb-svctm 4.00 2.82 2.86 1.98 2.84 Max sdb-rrqm 8.30 0.00 0.00 0.00 0.00 Max sdb-wrqm 34.20 5372.80 5278.60 5386.60 5546.15 FWIW, I also checked SPECjbb in different configurations but it's similar observations -- minor faults lower, PTE update activity lower and performance is roughly comparable against 3.19. This patch (of 3): Threads that share writable data within pages are grouped together as related tasks. This decision is based on whether the PTE is marked dirty which is subject to timing races between the PTE scanner update and when the application writes the page. If the page is file-backed, then background flushes and sync also affect placement. This is unpredictable behaviour which is impossible to reason about so this patch makes grouping decisions based on the VMA flags. Signed-off-by: Mel Gorman <mgorman@suse.de> Reported-by: Dave Chinner <david@fromorbit.com> Tested-by: Dave Chinner <david@fromorbit.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-03-25mm/page_alloc.c: call kernel_map_pages in unset_migrateype_isolateLaura Abbott
Commit 3c605096d315 ("mm/page_alloc: restrict max order of merging on isolated pageblock") changed the logic of unset_migratetype_isolate to check the buddy allocator and explicitly call __free_pages to merge. The page that is being freed in this path never had prep_new_page called so set_page_refcounted is called explicitly but there is no call to kernel_map_pages. With the default kernel_map_pages this is mostly harmless but if kernel_map_pages does any manipulation of the page tables (unmapping or setting pages to read only) this may trigger a fault: alloc_contig_range test_pages_isolated(ceb00, ced00) failed Unable to handle kernel paging request at virtual address ffffffc0cec00000 pgd = ffffffc045fc4000 [ffffffc0cec00000] *pgd=0000000000000000 Internal error: Oops: 9600004f [#1] PREEMPT SMP Modules linked in: exfatfs CPU: 1 PID: 23237 Comm: TimedEventQueue Not tainted 3.10.49-gc72ad36-dirty #1 task: ffffffc03de52100 ti: ffffffc015388000 task.ti: ffffffc015388000 PC is at memset+0xc8/0x1c0 LR is at kernel_map_pages+0x1ec/0x244 Fix this by calling kernel_map_pages to ensure the page is set in the page table properly Fixes: 3c605096d315 ("mm/page_alloc: restrict max order of merging on isolated pageblock") Signed-off-by: Laura Abbott <lauraa@codeaurora.org> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Mel Gorman <mgorman@suse.de> Acked-by: Rik van Riel <riel@redhat.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Cc: Xishi Qiu <qiuxishi@huawei.com> Cc: Vladimir Davydov <vdavydov@parallels.com> Acked-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Gioh Kim <gioh.kim@lge.com> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-03-25mm/slub: fix lockups on PREEMPT && !SMP kernelsMark Rutland
Commit 9aabf810a67c ("mm/slub: optimize alloc/free fastpath by removing preemption on/off") introduced an occasional hang for kernels built with CONFIG_PREEMPT && !CONFIG_SMP. The problem is the following loop the patch introduced to slab_alloc_node and slab_free: do { tid = this_cpu_read(s->cpu_slab->tid); c = raw_cpu_ptr(s->cpu_slab); } while (IS_ENABLED(CONFIG_PREEMPT) && unlikely(tid != c->tid)); GCC 4.9 has been observed to hoist the load of c and c->tid above the loop for !SMP kernels (as in this case raw_cpu_ptr(x) is compile-time constant and does not force a reload). On arm64 the generated assembly looks like: ldr x4, [x0,#8] loop: ldr x1, [x0,#8] cmp x1, x4 b.ne loop If the thread is preempted between the load of c->tid (into x1) and tid (into x4), and an allocation or free occurs in another thread (bumping the cpu_slab's tid), the thread will be stuck in the loop until s->cpu_slab->tid wraps, which may be forever in the absence of allocations/frees on the same CPU. This patch changes the loop condition to access c->tid with READ_ONCE. This ensures that the value is reloaded even when the compiler would otherwise assume it could cache the value, and also ensures that the load will not be torn. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Steve Capper <steve.capper@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-03-25mm/memory hotplug: postpone the reset of obsolete pgdatGu Zheng
Qiu Xishi reported the following BUG when testing hot-add/hot-remove node under stress condition: BUG: unable to handle kernel paging request at 0000000000025f60 IP: next_online_pgdat+0x1/0x50 PGD 0 Oops: 0000 [#1] SMP ACPI: Device does not support D3cold Modules linked in: fuse nls_iso8859_1 nls_cp437 vfat fat loop dm_mod coretemp mperf crc32c_intel ghash_clmulni_intel aesni_intel ablk_helper cryptd lrw gf128mul glue_helper aes_x86_64 pcspkr microcode igb dca i2c_algo_bit ipv6 megaraid_sas iTCO_wdt i2c_i801 i2c_core iTCO_vendor_support tg3 sg hwmon ptp lpc_ich pps_core mfd_core acpi_pad rtc_cmos button ext3 jbd mbcache sd_mod crc_t10dif scsi_dh_alua scsi_dh_rdac scsi_dh_hp_sw scsi_dh_emc scsi_dh ahci libahci libata scsi_mod [last unloaded: rasf] CPU: 23 PID: 238 Comm: kworker/23:1 Tainted: G O 3.10.15-5885-euler0302 #1 Hardware name: HUAWEI TECHNOLOGIES CO.,LTD. Huawei N1/Huawei N1, BIOS V100R001 03/02/2015 Workqueue: events vmstat_update task: ffffa800d32c0000 ti: ffffa800d32ae000 task.ti: ffffa800d32ae000 RIP: 0010: next_online_pgdat+0x1/0x50 RSP: 0018:ffffa800d32afce8 EFLAGS: 00010286 RAX: 0000000000001440 RBX: ffffffff81da53b8 RCX: 0000000000000082 RDX: 0000000000000000 RSI: 0000000000000082 RDI: 0000000000000000 RBP: ffffa800d32afd28 R08: ffffffff81c93bfc R09: ffffffff81cbdc96 R10: 00000000000040ec R11: 00000000000000a0 R12: ffffa800fffb3440 R13: ffffa800d32afd38 R14: 0000000000000017 R15: ffffa800e6616800 FS: 0000000000000000(0000) GS:ffffa800e6600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000025f60 CR3: 0000000001a0b000 CR4: 00000000001407e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: refresh_cpu_vm_stats+0xd0/0x140 vmstat_update+0x11/0x50 process_one_work+0x194/0x3d0 worker_thread+0x12b/0x410 kthread+0xc6/0xd0 ret_from_fork+0x7c/0xb0 The cause is the "memset(pgdat, 0, sizeof(*pgdat))" at the end of try_offline_node, which will reset all the content of pgdat to 0, as the pgdat is accessed lock-free, so that the users still using the pgdat will panic, such as the vmstat_update routine. process A: offline node XX: vmstat_updat() refresh_cpu_vm_stats() for_each_populated_zone() find online node XX cond_resched() offline cpu and memory, then try_offline_node() node_set_offline(nid), and memset(pgdat, 0, sizeof(*pgdat)) zone = next_zone(zone) pg_data_t *pgdat = zone->zone_pgdat; // here pgdat is NULL now next_online_pgdat(pgdat) next_online_node(pgdat->node_id); // NULL pointer access So the solution here is postponing the reset of obsolete pgdat from try_offline_node() to hotadd_new_pgdat(), and just resetting pgdat->nr_zones and pgdat->classzone_idx to be 0 rather than the memset 0 to avoid breaking pointer information in pgdat. Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com> Reported-by: Xishi Qiu <qiuxishi@huawei.com> Suggested-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: David Rientjes <rientjes@google.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Taku Izumi <izumi.taku@jp.fujitsu.com> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: Xie XiuQi <xiexiuqi@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-03-25mm/pagewalk.c: prevent positive return value of walk_page_test() from being ↵Naoya Horiguchi
passed to callers walk_page_test() is purely pagewalk's internal stuff, and its positive return values are not intended to be passed to the callers of pagewalk. However, in the current code if the last vma in the do-while loop in walk_page_range() happens to return a positive value, it leaks outside walk_page_range(). So the user visible effect is invalid/unexpected return value (according to the reporter, mbind() causes it.) This patch fixes it simply by reinitializing the return value after checked. Another exposed interface, walk_page_vma(), already returns 0 for such cases so no problem. Fixes: fafaa4264eba ("pagewalk: improve vma handling") Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by: Kazutomo Yoshii <kazutomo.yoshii@gmail.com> Reported-by: Kazutomo Yoshii <kazutomo.yoshii@gmail.com> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-03-25mm: fix anon_vma->degree underflow in anon_vma endless growing preventionLeon Yu
I have constantly stumbled upon "kernel BUG at mm/rmap.c:399!" after upgrading to 3.19 and had no luck with 4.0-rc1 neither. So, after looking into new logic introduced by commit 7a3ef208e662 ("mm: prevent endless growth of anon_vma hierarchy"), I found chances are that unlink_anon_vmas() is called without incrementing dst->anon_vma->degree in anon_vma_clone() due to allocation failure. If dst->anon_vma is not NULL in error path, its degree will be incorrectly decremented in unlink_anon_vmas() and eventually underflow when exiting as a result of another call to unlink_anon_vmas(). That's how "kernel BUG at mm/rmap.c:399!" is triggered for me. This patch fixes the underflow by dropping dst->anon_vma when allocation fails. It's safe to do so regardless of original value of dst->anon_vma because dst->anon_vma doesn't have valid meaning if anon_vma_clone() fails. Besides, callers don't care dst->anon_vma in such case neither. Also suggested by Michal Hocko, we can clean up vma_adjust() a bit as anon_vma_clone() now does the work. [akpm@linux-foundation.org: tweak comment] Fixes: 7a3ef208e662 ("mm: prevent endless growth of anon_vma hierarchy") Signed-off-by: Leon Yu <chianglungyu@gmail.com> Signed-off-by: Konstantin Khlebnikov <koct9i@gmail.com> Reviewed-by: Michal Hocko <mhocko@suse.cz> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: David Rientjes <rientjes@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-03-25Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block layer fixes from Jens Axboe: "A small collection of fixes that has been gathered over the last few weeks. This contains: - A one-liner fix for NVMe, fixing a missing list_head init that could makes us oops on hitting recovery at load time. - Two small blk-mq fixes: - Fixup a bad goto jump on error handling. - Fix for oopsing if running out of reserved tags. - A memory leak fix for NBD. - Two small writeback fixes from Tejun, fixing a missing init to INITIAL_JIFFIES, and a possible underflow introduced recently. - A core merge fixup in sg gap detection, where rq->biotail was indexed with the count of rq->bio" * 'for-linus' of git://git.kernel.dk/linux-block: writeback: fix possible underflow in write bandwidth calculation NVMe: Initialize device list head before starting Fix bug in blk_rq_merge_ok blkmq: Fix NULL pointer deref when all reserved tags in blk-mq: fix use of incorrect goto label in blk_mq_init_queue error path nbd: fix possible memory leak writeback: add missing INITIAL_JIFFIES init in global_update_bandwidth()
2015-03-23writeback: fix possible underflow in write bandwidth calculationTejun Heo
From 1ebf33901ecc75d9496862dceb1ef0377980587c Mon Sep 17 00:00:00 2001 From: Tejun Heo <tj@kernel.org> Date: Mon, 23 Mar 2015 00:08:19 -0400 2f800fbd777b ("writeback: fix dirtied pages accounting on redirty") introduced account_page_redirty() which reverts stat updates for a redirtied page, making BDI_DIRTIED no longer monotonically increasing. bdi_update_write_bandwidth() uses the delta in BDI_DIRTIED as the basis for bandwidth calculation. While unlikely, since the above patch, the newer value may be lower than the recorded past value and underflow the bandwidth calculation leading to a wild result. Fix it by subtracing min of the old and new values when calculating delta. AFAIK, there hasn't been any report of it happening but the resulting erratic behavior would be non-critical and temporary, so it's possible that the issue is happening without being reported. The risk of the fix is very low, so tagged for -stable. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Fixes: 2f800fbd777b ("writeback: fix dirtied pages accounting on redirty") Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe <axboe@fb.com>
2015-03-13Merge branch 'gadget' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds
Pull gadgetfs fixes from Al Viro: "Assorted fixes around AIO on gadgetfs: leaks, use-after-free, troubles caused by ->f_op flipping" * 'gadget' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: gadgetfs: really get rid of switching ->f_op gadgetfs: get rid of flipping ->f_op in ep_config() gadget: switch ep_io_operations to ->read_iter/->write_iter gadgetfs: use-after-free in ->aio_read() gadget/function/f_fs.c: switch to ->{read,write}_iter() gadget/function/f_fs.c: use put iov_iter into io_data gadget/function/f_fs.c: close leaks move iov_iter.c from mm/ to lib/ new helper: dup_iter()
2015-03-13Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge misc fixes from Andrew Morton: "13 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: memcg: disable hierarchy support if bound to the legacy cgroup hierarchy mm: reorder can_do_mlock to fix audit denial kasan, module: move MODULE_ALIGN macro into <linux/moduleloader.h> kasan, module, vmalloc: rework shadow allocation for modules fanotify: fix event filtering with FAN_ONDIR set mm/nommu.c: export symbol max_mapnr arch/c6x/include/asm/pgtable.h: define dummy pgprot_writecombine for !MMU nilfs2: fix deadlock of segment constructor during recovery mm: cma: fix CMA aligned offset calculation mm, hugetlb: close race when setting PageTail for gigantic pages mm, oom: do not fail __GFP_NOFAIL allocation if oom killer is disabled drivers/rtc/rtc-s3c.c: add .needs_src_clk to s3c6410 RTC data ocfs2: make append_dio an incompat feature
2015-03-13memcg: disable hierarchy support if bound to the legacy cgroup hierarchyVladimir Davydov
If the memory cgroup controller is initially mounted in the scope of the default cgroup hierarchy and then remounted to a legacy hierarchy, it will still have hierarchy support enabled, which is incorrect. We should disable hierarchy support if bound to the legacy cgroup hierarchy. Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-03-13mm: reorder can_do_mlock to fix audit denialJeff Vander Stoep
A userspace call to mmap(MAP_LOCKED) may result in the successful locking of memory while also producing a confusing audit log denial. can_do_mlock checks capable and rlimit. If either of these return positive can_do_mlock returns true. The capable check leads to an LSM hook used by apparmour and selinux which produce the audit denial. Reordering so rlimit is checked first eliminates the denial on success, only recording a denial when the lock is unsuccessful as a result of the denial. Signed-off-by: Jeff Vander Stoep <jeffv@google.com> Acked-by: Nick Kralevich <nnk@google.com> Cc: Jeff Vander Stoep <jeffv@google.com> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Rik van Riel <riel@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Paul Cassella <cassella@cray.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-03-13kasan, module, vmalloc: rework shadow allocation for modulesAndrey Ryabinin
Current approach in handling shadow memory for modules is broken. Shadow memory could be freed only after memory shadow corresponds it is no longer used. vfree() called from interrupt context could use memory its freeing to store 'struct llist_node' in it: void vfree(const void *addr) { ... if (unlikely(in_interrupt())) { struct vfree_deferred *p = this_cpu_ptr(&vfree_deferred); if (llist_add((struct llist_node *)addr, &p->list)) schedule_work(&p->wq); Later this list node used in free_work() which actually frees memory. Currently module_memfree() called in interrupt context will free shadow before freeing module's memory which could provoke kernel crash. So shadow memory should be freed after module's memory. However, such deallocation order could race with kasan_module_alloc() in module_alloc(). Free shadow right before releasing vm area. At this point vfree()'d memory is not used anymore and yet not available for other allocations. New VM_KASAN flag used to indicate that vm area has dynamically allocated shadow memory so kasan frees shadow only if it was previously allocated. Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-03-13mm/nommu.c: export symbol max_mapnrgchen gchen
Several modules may need max_mapnr, so export, the related error with allmodconfig under c6x: MODPOST 3327 modules ERROR: "max_mapnr" [fs/pstore/ramoops.ko] undefined! ERROR: "max_mapnr" [drivers/media/v4l2-core/videobuf2-dma-contig.ko] undefined! Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com> Cc: Mark Salter <msalter@redhat.com> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-03-13mm: cma: fix CMA aligned offset calculationDanesh Petigara
The CMA aligned offset calculation is incorrect for non-zero order_per_bit values. For example, if cma->order_per_bit=1, cma->base_pfn= 0x2f800000 and align_order=12, the function returns a value of 0x17c00 instead of 0x400. This patch fixes the CMA aligned offset calculation. The previous calculation was wrong and would return too-large values for the offset, so that when cma_alloc looks for free pages in the bitmap with the requested alignment > order_per_bit, it starts too far into the bitmap and so CMA allocations will fail despite there actually being plenty of free pages remaining. It will also probably have the wrong alignment. With this change, we will get the correct offset into the bitmap. One affected user is powerpc KVM, which has kvm_cma->order_per_bit set to KVM_CMA_CHUNK_ORDER - PAGE_SHIFT, or 18 - 12 = 6. [gregory.0xf0@gmail.com: changelog additions] Signed-off-by: Danesh Petigara <dpetigara@broadcom.com> Reviewed-by: Gregory Fong <gregory.0xf0@gmail.com> Acked-by: Michal Nazarewicz <mina86@mina86.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-03-13mm, hugetlb: close race when setting PageTail for gigantic pagesDavid Rientjes
Now that gigantic pages are dynamically allocatable, care must be taken to ensure that p->first_page is valid before setting PageTail. If this isn't done, then it is possible to race and have compound_head() return NULL. Signed-off-by: David Rientjes <rientjes@google.com> Acked-by: Davidlohr Bueso <dave@stgolabs.net> Cc: Luiz Capitulino <lcapitulino@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-03-13mm, oom: do not fail __GFP_NOFAIL allocation if oom killer is disabledMichal Hocko
Tetsuo Handa has pointed out that __GFP_NOFAIL allocations might fail after OOM killer is disabled if the allocation is performed by a kernel thread. This behavior was introduced from the very beginning by 7f33d49a2ed5 ("mm, PM/Freezer: Disable OOM killer when tasks are frozen"). This means that the basic contract for the allocation request is broken and the context requesting such an allocation might blow up unexpectedly. There are basically two ways forward. 1) move oom_killer_disable after kernel threads are frozen. This has a risk that the OOM victim wouldn't be able to finish because it would depend on an already frozen kernel thread. This would be really tricky to debug. 2) do not fail GFP_NOFAIL allocation no matter what and risk a potential Freezable kernel threads will loop and fail the suspend. Incidental allocations after kernel threads are frozen will at least dump a warning - if we are lucky and the serial console is still active of course... This patch implements the later option because it is safer. We would see warning rather than allocation failures for the kernel threads which would blow up otherwise and have a higher chances to identify __GFP_NOFAIL users from deeper pm code. Signed-off-by: Michal Hocko <mhocko@suse.cz> Acked-by: David Rientjes <rientjes@gooogle.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-03-12mm: thp: Return the correct value for change_huge_pmdMel Gorman
The wrong value is being returned by change_huge_pmd since commit 10c1045f28e8 ("mm: numa: avoid unnecessary TLB flushes when setting NUMA hinting entries") which allows a fallthrough that tries to adjust non-existent PTEs. This patch corrects it. Signed-off-by: Mel Gorman <mgorman@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-03-12mm: fix up numa read-only thread grouping logicLinus Torvalds
Dave Chinner reported that commit 4d9424669946 ("mm: convert p[te|md]_mknonnuma and remaining page table manipulations") slowed down his xfsrepair test enormously. In particular, it was using more system time due to extra TLB flushing. The ultimate reason turns out to be how the change to use the regular page table accessor functions broke the NUMA grouping logic. The old special mknuma/mknonnuma code accessed the page table present bit and the magic NUMA bit directly, while the new code just changes the page protections using PROT_NONE and the regular vma protections. That sounds equivalent, and from a fault standpoint it really is, but a subtle side effect is that the *other* protection bits of the page table entries also change. And the code to decide how to group the NUMA entries together used the writable bit to decide whether a particular page was likely to be shared read-only or not. And with the change to make the NUMA handling use the regular permission setting functions, that writable bit was basically always cleared for private mappings due to COW. So even if the page actually ends up being written to in the end, the NUMA balancing would act as if it was always shared RO. This code is a heuristic anyway, so the fix - at least for now - is to instead check whether the page is dirty rather than writable. The bit doesn't change with protection changes. NOTE! This also adds a FIXME comment to revisit this issue, Not only should we probably re-visit the whole "is this a shared read-only page" heuristic (we might want to take the vma permissions into account and base this more on those than the per-page ones, and also look at whether the particular access that triggers it is a write or not), but the whole COW issue shows that we should think about the NUMA fault handling some more. For example, maybe we should do the early-COW thing that a regular fault does. Or maybe we should accept that while using the same bits as PROTNONE was a good thing (and got rid of the specual NUMA bit), we might still want to just preseve the other protection bits across NUMA faulting. Those are bigger questions, left for later. This just fixes up the heuristic so that it at least approximates working again. More analysis and work needed. Reported-by: Dave Chinner <david@fromorbit.com> Tested-by: Mel Gorman <mgorman@suse.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@kernel.org>, Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-03-04writeback: add missing INITIAL_JIFFIES init in global_update_bandwidth()Tejun Heo
global_update_bandwidth() uses static variable update_time as the timestamp for the last update but forgets to initialize it to INITIALIZE_JIFFIES. This means that global_dirty_limit will be 5 mins into the future on 32bit and some large amount jiffies into the past on 64bit. This isn't critical as the only effect is that global_dirty_limit won't be updated for the first 5 mins after booting on 32bit machines, especially given the auxiliary nature of global_dirty_limit's role - protecting against global dirty threshold's sudden dips; however, it does lead to unintended suboptimal behavior. Fix it. Fixes: c42843f2f0bb ("writeback: introduce smoothed global dirty limit") Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe <axboe@fb.com>
2015-02-28Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block layer fixes from Jens Axboe: "Two smaller fixes for this cycle: - A fixup from Keith so that NVMe compiles without BLK_INTEGRITY, basically just moving the code around appropriately. - A fixup for shm, fixing an oops in shmem_mapping() for mapping with no inode. From Sasha" [ The shmem fix doesn't look block-layer-related, but fixes a bug that happened due to the backing_dev_info removal.. - Linus ] * 'for-linus' of git://git.kernel.dk/linux-block: mm: shmem: check for mapping owner before dereferencing NVMe: Fix for BLK_DEV_INTEGRITY not set
2015-02-28mm: page_alloc: revert inadvertent !__GFP_FS retry behavior changeJohannes Weiner
Historically, !__GFP_FS allocations were not allowed to invoke the OOM killer once reclaim had failed, but nevertheless kept looping in the allocator. Commit 9879de7373fc ("mm: page_alloc: embed OOM killing naturally into allocation slowpath"), which should have been a simple cleanup patch, accidentally changed the behavior to aborting the allocation at that point. This creates problems with filesystem callers (?) that currently rely on the allocator waiting for other tasks to intervene. Revert the behavior as it shouldn't have been changed as part of a cleanup patch. Fixes: 9879de7373fc ("mm: page_alloc: embed OOM killing naturally into allocation slowpath") Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.cz> Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Dave Chinner <david@fromorbit.com> Acked-by: David Rientjes <rientjes@google.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: <stable@vger.kernel.org> [3.19.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-28mm: memcontrol: use "max" instead of "infinity" in control knobsJohannes Weiner
The memcg control knobs indicate the highest possible value using the symbolic name "infinity", which is long and awkward to type. Switch to the string "max", which is just as descriptive but shorter and sweeter. This changes a user interface, so do it before the release and before the development flag is dropped from the default hierarchy. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Tejun Heo <tj@kernel.org> Cc: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-28memcg: fix low limit calculationMichal Hocko
A memcg is considered low limited even when the current usage is equal to the low limit. This leads to interesting side effects e.g. groups/hierarchies with no memory accounted are considered protected and so the reclaim will emit MEMCG_LOW event when encountering them. Another and much bigger issue was reported by Joonsoo Kim. He has hit a NULL ptr dereference with the legacy cgroup API which even doesn't have low limit exposed. The limit is 0 by default but the initial check fails for memcg with 0 consumption and parent_mem_cgroup() would return NULL if use_hierarchy is 0 and so page_counter_read would try to dereference NULL. I suppose that the current implementation is just an overlook because the documentation in Documentation/cgroups/unified-hierarchy.txt says: "The memory.low boundary on the other hand is a top-down allocated reserve. A cgroup enjoys reclaim protection when it and all its ancestors are below their low boundaries" Fix the usage and the low limit comparision in mem_cgroup_low accordingly. Fixes: 241994ed8649 (mm: memcontrol: default hierarchy interface for memory) Reported-by: Joonsoo Kim <js1304@gmail.com> Signed-off-by: Michal Hocko <mhocko@suse.cz> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-28mm/nommu: fix memory leakJoonsoo Kim
Maxime reported the following memory leak regression due to commit dbc8358c7237 ("mm/nommu: use alloc_pages_exact() rather than its own implementation"). On v3.19, I am facing a memory leak. Each time I run a command one page is lost. Here an example with busybox's free command: / # free total used free shared buffers cached Mem: 7928 1972 5956 0 0 492 -/+ buffers/cache: 1480 6448 / # free total used free shared buffers cached Mem: 7928 1976 5952 0 0 492 -/+ buffers/cache: 1484 6444 / # free total used free shared buffers cached Mem: 7928 1980 5948 0 0 492 -/+ buffers/cache: 1488 6440 / # free total used free shared buffers cached Mem: 7928 1984 5944 0 0 492 -/+ buffers/cache: 1492 6436 / # free total used free shared buffers cached Mem: 7928 1988 5940 0 0 492 -/+ buffers/cache: 1496 6432 At some point, the system fails to sastisfy 256KB allocations: free: page allocation failure: order:6, mode:0xd0 CPU: 0 PID: 67 Comm: free Not tainted 3.19.0-05389-gacf2cf1-dirty #64 Hardware name: STM32 (Device Tree Support) show_stack+0xb/0xc warn_alloc_failed+0x97/0xbc __alloc_pages_nodemask+0x295/0x35c __get_free_pages+0xb/0x24 alloc_pages_exact+0x19/0x24 do_mmap_pgoff+0x423/0x658 vm_mmap_pgoff+0x3f/0x4e load_flat_file+0x20d/0x4f8 load_flat_binary+0x3f/0x26c search_binary_handler+0x51/0xe4 do_execveat_common+0x271/0x35c do_execve+0x19/0x1c ret_fast_syscall+0x1/0x4a Mem-info: Normal per-cpu: CPU 0: hi: 0, btch: 1 usd: 0 active_anon:0 inactive_anon:0 isolated_anon:0 active_file:0 inactive_file:0 isolated_file:0 unevictable:123 dirty:0 writeback:0 unstable:0 free:1515 slab_reclaimable:17 slab_unreclaimable:139 mapped:0 shmem:0 pagetables:0 bounce:0 free_cma:0 Normal free:6060kB min:352kB low:440kB high:528kB active_anon:0kB inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:492kB isolated(anon):0ks lowmem_reserve[]: 0 0 Normal: 23*4kB (U) 22*8kB (U) 24*16kB (U) 23*32kB (U) 23*64kB (U) 23*128kB (U) 1*256kB (U) 0*512kB 0*1024kB 0*2048kB 0*4096kB = 6060kB 123 total pagecache pages 2048 pages of RAM 1538 free pages 66 reserved pages 109 slab pages -46 pages shared 0 pages swap cached nommu: Allocation of length 221184 from process 67 (free) failed Normal per-cpu: CPU 0: hi: 0, btch: 1 usd: 0 active_anon:0 inactive_anon:0 isolated_anon:0 active_file:0 inactive_file:0 isolated_file:0 unevictable:123 dirty:0 writeback:0 unstable:0 free:1515 slab_reclaimable:17 slab_unreclaimable:139 mapped:0 shmem:0 pagetables:0 bounce:0 free_cma:0 Normal free:6060kB min:352kB low:440kB high:528kB active_anon:0kB inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:492kB isolated(anon):0ks lowmem_reserve[]: 0 0 Normal: 23*4kB (U) 22*8kB (U) 24*16kB (U) 23*32kB (U) 23*64kB (U) 23*128kB (U) 1*256kB (U) 0*512kB 0*1024kB 0*2048kB 0*4096kB = 6060kB 123 total pagecache pages Unable to allocate RAM for process text/data, errno 12 SEGV This problem happens because we allocate ordered page through __get_free_pages() in do_mmap_private() in some cases and we try to free individual pages rather than ordered page in free_page_series(). In this case, freeing pages whose refcount is not 0 won't be freed to the page allocator so memory leak happens. To fix the problem, this patch changes __get_free_pages() to alloc_pages_exact() since alloc_pages_exact() returns physically-contiguous pages but each pages are refcounted. Fixes: dbc8358c7237 ("mm/nommu: use alloc_pages_exact() rather than its own implementation"). Reported-by: Maxime Coquelin <mcoquelin.stm32@gmail.com> Tested-by: Maxime Coquelin <mcoquelin.stm32@gmail.com> Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: <stable@vger.kernel.org> [3.19] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-23mm: shmem: check for mapping owner before dereferencingSasha Levin
mapping->host can be NULL and shouldn't be dereferenced before being checked. [ 1295.741844] GPF could be caused by NULL-ptr deref or user memory accessgeneral protection fault: 0000 [#1] SMP KASAN [ 1295.746387] Dumping ftrace buffer: [ 1295.748217] (ftrace buffer empty) [ 1295.749527] Modules linked in: [ 1295.750268] CPU: 62 PID: 23410 Comm: trinity-c70 Not tainted 3.19.0-next-20150219-sasha-00045-g9130270f #1939 [ 1295.750268] task: ffff8803a49db000 ti: ffff8803a4dc8000 task.ti: ffff8803a4dc8000 [ 1295.750268] RIP: shmem_mapping (mm/shmem.c:1458) [ 1295.750268] RSP: 0000:ffff8803a4dcfbf8 EFLAGS: 00010206 [ 1295.750268] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 00000000000f2804 [ 1295.750268] RDX: 0000000000000005 RSI: 0400000000000794 RDI: 0000000000000028 [ 1295.750268] RBP: ffff8803a4dcfc08 R08: 0000000000000000 R09: 00000000031de000 [ 1295.750268] R10: dffffc0000000000 R11: 00000000031c1000 R12: 0400000000000794 [ 1295.750268] R13: 00000000031c2000 R14: 00000000031de000 R15: ffff880e3bdc1000 [ 1295.750268] FS: 00007f8703c7e700(0000) GS:ffff881164800000(0000) knlGS:0000000000000000 [ 1295.750268] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1295.750268] CR2: 0000000004e58000 CR3: 00000003a9f3c000 CR4: 00000000000007a0 [ 1295.750268] DR0: ffffffff81000000 DR1: 0000009494949494 DR2: 0000000000000000 [ 1295.750268] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 00000000000d0602 [ 1295.750268] Stack: [ 1295.750268] ffff8803a4dcfec8 ffffffffbb1dc770 ffff8803a4dcfc38 ffffffffad6f230b [ 1295.750268] ffffffffad6f2b0d 0000014100000000 ffff88001e17c08b ffff880d9453fe08 [ 1295.750268] ffff8803a4dcfd18 ffffffffad6f2ce2 ffff8803a49dbcd8 ffff8803a49dbce0 [ 1295.750268] Call Trace: [ 1295.750268] mincore_page (mm/mincore.c:61) [ 1295.750268] ? mincore_pte_range (include/linux/spinlock.h:312 mm/mincore.c:131) [ 1295.750268] mincore_pte_range (mm/mincore.c:151) [ 1295.750268] ? mincore_unmapped_range (mm/mincore.c:113) [ 1295.750268] __walk_page_range (mm/pagewalk.c:51 mm/pagewalk.c:90 mm/pagewalk.c:116 mm/pagewalk.c:204) [ 1295.750268] walk_page_range (mm/pagewalk.c:275) [ 1295.750268] SyS_mincore (mm/mincore.c:191 mm/mincore.c:253 mm/mincore.c:220) [ 1295.750268] ? mincore_pte_range (mm/mincore.c:220) [ 1295.750268] ? mincore_unmapped_range (mm/mincore.c:113) [ 1295.750268] ? __mincore_unmapped_range (mm/mincore.c:105) [ 1295.750268] ? ptlock_free (mm/mincore.c:24) [ 1295.750268] ? syscall_trace_enter (arch/x86/kernel/ptrace.c:1610) [ 1295.750268] ia32_do_call (arch/x86/ia32/ia32entry.S:446) [ 1295.750268] Code: e5 48 c1 ea 03 53 48 89 fb 48 83 ec 08 80 3c 02 00 75 4f 48 b8 00 00 00 00 00 fc ff df 48 8b 1b 48 8d 7b 28 48 89 fa 48 c1 ea 03 <80> 3c 02 00 75 3f 48 b8 00 00 00 00 00 fc ff df 48 8b 5b 28 48 All code ======== 0: e5 48 in $0x48,%eax 2: c1 ea 03 shr $0x3,%edx 5: 53 push %rbx 6: 48 89 fb mov %rdi,%rbx 9: 48 83 ec 08 sub $0x8,%rsp d: 80 3c 02 00 cmpb $0x0,(%rdx,%rax,1) 11: 75 4f jne 0x62 13: 48 b8 00 00 00 00 00 movabs $0xdffffc0000000000,%rax 1a: fc ff df 1d: 48 8b 1b mov (%rbx),%rbx 20: 48 8d 7b 28 lea 0x28(%rbx),%rdi 24: 48 89 fa mov %rdi,%rdx 27: 48 c1 ea 03 shr $0x3,%rdx 2b:* 80 3c 02 00 cmpb $0x0,(%rdx,%rax,1) <-- trapping instruction 2f: 75 3f jne 0x70 31: 48 b8 00 00 00 00 00 movabs $0xdffffc0000000000,%rax 38: fc ff df 3b: 48 8b 5b 28 mov 0x28(%rbx),%rbx 3f: 48 rex.W ... Code starting with the faulting instruction =========================================== 0: 80 3c 02 00 cmpb $0x0,(%rdx,%rax,1) 4: 75 3f jne 0x45 6: 48 b8 00 00 00 00 00 movabs $0xdffffc0000000000,%rax d: fc ff df 10: 48 8b 5b 28 mov 0x28(%rbx),%rbx 14: 48 rex.W ... [ 1295.750268] RIP shmem_mapping (mm/shmem.c:1458) [ 1295.750268] RSP <ffff8803a4dcfbf8> Fixes: 97b713ba3e ("fs: kill BDI_CAP_SWAP_BACKED") Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-02-23Merge branch 'for-linus-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull more vfs updates from Al Viro: "Assorted stuff from this cycle. The big ones here are multilayer overlayfs from Miklos and beginning of sorting ->d_inode accesses out from David" * 'for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (51 commits) autofs4 copy_dev_ioctl(): keep the value of ->size we'd used for allocation procfs: fix race between symlink removals and traversals debugfs: leave freeing a symlink body until inode eviction Documentation/filesystems/Locking: ->get_sb() is long gone trylock_super(): replacement for grab_super_passive() fanotify: Fix up scripted S_ISDIR/S_ISREG/S_ISLNK conversions Cachefiles: Fix up scripted S_ISDIR/S_ISREG/S_ISLNK conversions VFS: (Scripted) Convert S_ISLNK/DIR/REG(dentry->d_inode) to d_is_*(dentry) SELinux: Use d_is_positive() rather than testing dentry->d_inode Smack: Use d_is_positive() rather than testing dentry->d_inode TOMOYO: Use d_is_dir() rather than d_inode and S_ISDIR() Apparmor: Use d_is_positive/negative() rather than testing dentry->d_inode Apparmor: mediated_filesystem() should use dentry->d_sb not inode->i_sb VFS: Split DCACHE_FILE_TYPE into regular and special types VFS: Add a fallthrough flag for marking virtual dentries VFS: Add a whiteout dentry type VFS: Introduce inode-getting helpers for layered/unioned fs environments Infiniband: Fix potential NULL d_inode dereference posix_acl: fix reference leaks in posix_acl_create autofs4: Wrong format for printing dentry ...
2015-02-22VFS: (Scripted) Convert S_ISLNK/DIR/REG(dentry->d_inode) to d_is_*(dentry)David Howells
Convert the following where appropriate: (1) S_ISLNK(dentry->d_inode) to d_is_symlink(dentry). (2) S_ISREG(dentry->d_inode) to d_is_reg(dentry). (3) S_ISDIR(dentry->d_inode) to d_is_dir(dentry). This is actually more complicated than it appears as some calls should be converted to d_can_lookup() instead. The difference is whether the directory in question is a real dir with a ->lookup op or whether it's a fake dir with a ->d_automount op. In some circumstances, we can subsume checks for dentry->d_inode not being NULL into this, provided we the code isn't in a filesystem that expects d_inode to be NULL if the dirent really *is* negative (ie. if we're going to use d_inode() rather than d_backing_inode() to get the inode pointer). Note that the dentry type field may be set to something other than DCACHE_MISS_TYPE when d_inode is NULL in the case of unionmount, where the VFS manages the fall-through from a negative dentry to a lower layer. In such a case, the dentry type of the negative union dentry is set to the same as the type of the lower dentry. However, if you know d_inode is not NULL at the call site, then you can use the d_is_xxx() functions even in a filesystem. There is one further complication: a 0,0 chardev dentry may be labelled DCACHE_WHITEOUT_TYPE rather than DCACHE_SPECIAL_TYPE. Strictly, this was intended for special directory entry types that don't have attached inodes. The following perl+coccinelle script was used: use strict; my @callers; open($fd, 'git grep -l \'S_IS[A-Z].*->d_inode\' |') || die "Can't grep for S_ISDIR and co. callers"; @callers = <$fd>; close($fd); unless (@callers) { print "No matches\n"; exit(0); } my @cocci = ( '@@', 'expression E;', '@@', '', '- S_ISLNK(E->d_inode->i_mode)', '+ d_is_symlink(E)', '', '@@', 'expression E;', '@@', '', '- S_ISDIR(E->d_inode->i_mode)', '+ d_is_dir(E)', '', '@@', 'expression E;', '@@', '', '- S_ISREG(E->d_inode->i_mode)', '+ d_is_reg(E)' ); my $coccifile = "tmp.sp.cocci"; open($fd, ">$coccifile") || die $coccifile; print($fd "$_\n") || die $coccifile foreach (@cocci); close($fd); foreach my $file (@callers) { chomp $file; print "Processing ", $file, "\n"; system("spatch", "--sp-file", $coccifile, $file, "--in-place", "--no-show-diff") == 0 || die "spatch failed"; } [AV: overlayfs parts skipped] Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-02-19Merge branch 'kconfig' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild Pull kconfig updates from Michal Marek: "Yann E Morin was supposed to take over kconfig maintainership, but this hasn't happened. So I'm sending a few kconfig patches that I collected: - Fix for missing va_end in kconfig - merge_config.sh displays used if given too few arguments - s/boolean/bool/ in Kconfig files for consistency, with the plan to only support bool in the future" * 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: kconfig: use va_end to match corresponding va_start merge_config.sh: Display usage if given too few arguments kconfig: use bool instead of boolean for type definition attributes
2015-02-18move iov_iter.c from mm/ to lib/Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-02-18new helper: dup_iter()Al Viro
Copy iter and kmemdup the underlying array for the copy. Returns a pointer to result of kmemdup() to be kfree()'d later. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-02-18Merge branch 'lazytime' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull lazytime mount option support from Al Viro: "Lazytime stuff from tytso" * 'lazytime' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: ext4: add optimization for the lazytime mount option vfs: add find_inode_nowait() function vfs: add support for a lazytime mount option
2015-02-17Merge branch 'iov_iter' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull iov_iter updates from Al Viro: "More iov_iter work - missing counterpart of iov_iter_init() for bvec-backed ones and vfs_read_iter()/vfs_write_iter() - wrappers for sync calls of ->read_iter()/->write_iter()" * 'iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fs: add vfs_iter_{read,write} helpers new helper: iov_iter_bvec()
2015-02-17vfs: remove get_xip_memMatthew Wilcox
All callers of get_xip_mem() are now gone. Remove checks for it, initialisers of it, documentation of it and the only implementation of it. Also remove mm/filemap_xip.c as it is now empty. Also remove documentation of the long-gone get_xip_page(). Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com> Cc: Andreas Dilger <andreas.dilger@intel.com> Cc: Boaz Harrosh <boaz@plexistor.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Dave Chinner <david@fromorbit.com> Cc: Jan Kara <jack@suse.cz> Cc: Jens Axboe <axboe@kernel.dk> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-17dax,ext2: replace xip_truncate_page with dax_truncate_pageMatthew Wilcox
It takes a get_block parameter just like nobh_truncate_page() and block_truncate_page() Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com> Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Andreas Dilger <andreas.dilger@intel.com> Cc: Boaz Harrosh <boaz@plexistor.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Dave Chinner <david@fromorbit.com> Cc: Jan Kara <jack@suse.cz> Cc: Jens Axboe <axboe@kernel.dk> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-17dax,ext2: replace the XIP page fault handler with the DAX page fault handlerMatthew Wilcox
Instead of calling aops->get_xip_mem from the fault handler, the filesystem passes a get_block_t that is used to find the appropriate blocks. This requires that all architectures implement copy_user_page(). At the time of writing, mips and arm do not. Patches exist and are in progress. [akpm@linux-foundation.org: remap_file_pages went away] Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Andreas Dilger <andreas.dilger@intel.com> Cc: Boaz Harrosh <boaz@plexistor.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Dave Chinner <david@fromorbit.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-17dax,ext2: replace XIP read and write with DAX I/OMatthew Wilcox
Use the generic AIO infrastructure instead of custom read and write methods. In addition to giving us support for AIO, this adds the missing locking between read() and truncate(). Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com> Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Andreas Dilger <andreas.dilger@intel.com> Cc: Boaz Harrosh <boaz@plexistor.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Dave Chinner <david@fromorbit.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-17vfs,ext2: introduce IS_DAX(inode)Matthew Wilcox
Use an inode flag to tag inodes which should avoid using the page cache. Convert ext2 to use it instead of mapping_is_xip(). Prevent I/Os to files tagged with the DAX flag from falling back to buffered I/O. Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Andreas Dilger <andreas.dilger@intel.com> Cc: Boaz Harrosh <boaz@plexistor.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Dave Chinner <david@fromorbit.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-17mm: allow page fault handlers to perform the COWMatthew Wilcox
Currently COW of an XIP file is done by first bringing in a read-only mapping, then retrying the fault and copying the page. It is much more efficient to tell the fault handler that a COW is being attempted (by passing in the pre-allocated page in the vm_fault structure), and allow the handler to perform the COW operation itself. The handler cannot insert the page itself if there is already a read-only mapping at that address, so allow the handler to return VM_FAULT_LOCKED and set the fault_page to be NULL. This indicates to the MM code that the i_mmap_lock is held instead of the page lock. Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Andreas Dilger <andreas.dilger@intel.com> Cc: Boaz Harrosh <boaz@plexistor.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Dave Chinner <david@fromorbit.com> Cc: Jan Kara <jack@suse.cz> Cc: Jens Axboe <axboe@kernel.dk> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-17mm: fix XIP fault vs truncate raceMatthew Wilcox
DAX is a replacement for the variation of XIP currently supported by the ext2 filesystem. We have three different things in the tree called 'XIP', and the new focus is on access to data rather than executables, so a name change was in order. DAX stands for Direct Access. The X is for eXciting. The new focus on data access has resulted in more careful attention to races that exist in the current XIP code, but are not hit by the use-case that it was designed for. XIP's architecture worked fine for ext2, but DAX is architected to work with modern filsystems such as ext4 and XFS. DAX is not intended for use with btrfs; the value that btrfs adds relies on manipulating data and writing data to different locations, while DAX's value is for write-in-place and keeping the kernel from touching the data. DAX was developed in order to support NV-DIMMs, but it's become clear that its usefuless extends beyond NV-DIMMs and there are several potential customers including the tracing machinery. Other people want to place the kernel log in an area of memory, as long as they have a BIOS that does not clear DRAM on reboot. Patch 1 is a bug fix, probably worth including in 3.18. Patches 2 & 3 are infrastructure for DAX. Patches 4-8 replace the XIP code with its DAX equivalents, transforming ext2 to use the DAX code as we go. Note that patch 10 is the Documentation patch. Patches 9-15 clean up after the XIP code, removing the infrastructure that is no longer needed and renaming various XIP things to DAX. Most of these patches were added after Jan found things he didn't like in an earlier version of the ext4 patch ... that had been copied from ext2. So ext2 i being transformed to do things the same way that ext4 will later. The ability to mount ext2 filesystems with the 'xip' option is retained, although the 'dax' option is now preferred. Patch 16 adds some DAX infrastructure to support ext4. Patch 17 adds DAX support to ext4. It is broadly similar to ext2's DAX support, but it is more efficient than ext4's due to its support for unwritten extents. Patch 18 is another cleanup patch renaming XIP to DAX. My thanks to Mathieu Desnoyers for his reviews of the v11 patchset. Most of the changes below were based on his feedback. This patch (of 18): Pagecache faults recheck i_size after taking the page lock to ensure that the fault didn't race against a truncate. We don't have a page to lock in the XIP case, so use i_mmap_lock_read() instead. It is locked in the truncate path in unmap_mapping_range() after updating i_size. So while we hold it in the fault path, we are guaranteed that either i_size has already been updated in the truncate path, or that the truncate will subsequently call zap_page_range_single() and so remove the mapping we have just inserted. There is a window of time in which i_size has been reduced and the thread has a mapping to a page which will be removed from the file, but this is harmless as the page will not be allocated to a different purpose before the thread's access to it is revoked. [akpm@linux-foundation.org: switch to i_mmap_lock_read(), add comment in unmap_single_vma()] Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Andreas Dilger <andreas.dilger@intel.com> Cc: Boaz Harrosh <boaz@plexistor.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Dave Chinner <david@fromorbit.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-14Merge tag 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/borntraeger/linux Pull ACCESS_ONCE() rule tightening from Christian Borntraeger: "Tighten rules for ACCESS_ONCE This series tightens the rules for ACCESS_ONCE to only work on scalar types. It also contains the necessary fixups as indicated by build bots of linux-next. Now everything is in place to prevent new non-scalar users of ACCESS_ONCE and we can continue to convert code to READ_ONCE/WRITE_ONCE" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/borntraeger/linux: kernel: Fix sparse warning for ACCESS_ONCE next: sh: Fix compile error kernel: tighten rules for ACCESS ONCE mm/gup: Replace ACCESS_ONCE with READ_ONCE x86/spinlock: Leftover conversion ACCESS_ONCE->READ_ONCE x86/xen/p2m: Replace ACCESS_ONCE with READ_ONCE ppc/hugetlbfs: Replace ACCESS_ONCE with READ_ONCE ppc/kvm: Replace ACCESS_ONCE with READ_ONCE
2015-02-14kasan: enable instrumentation of global variablesAndrey Ryabinin
This feature let us to detect accesses out of bounds of global variables. This will work as for globals in kernel image, so for globals in modules. Currently this won't work for symbols in user-specified sections (e.g. __init, __read_mostly, ...) The idea of this is simple. Compiler increases each global variable by redzone size and add constructors invoking __asan_register_globals() function. Information about global variable (address, size, size with redzone ...) passed to __asan_register_globals() so we could poison variable's redzone. This patch also forces module_alloc() to return 8*PAGE_SIZE aligned address making shadow memory handling ( kasan_module_alloc()/kasan_module_free() ) more simple. Such alignment guarantees that each shadow page backing modules address space correspond to only one module_alloc() allocation. Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Konstantin Serebryany <kcc@google.com> Cc: Dmitry Chernenkov <dmitryc@google.com> Signed-off-by: Andrey Konovalov <adech.fo@gmail.com> Cc: Yuri Gribov <tetra2005@gmail.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Christoph Lameter <cl@linux.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-14mm: vmalloc: pass additional vm_flags to __vmalloc_node_range()Andrey Ryabinin
For instrumenting global variables KASan will shadow memory backing memory for modules. So on module loading we will need to allocate memory for shadow and map it at address in shadow that corresponds to the address allocated in module_alloc(). __vmalloc_node_range() could be used for this purpose, except it puts a guard hole after allocated area. Guard hole in shadow memory should be a problem because at some future point we might need to have a shadow memory at address occupied by guard hole. So we could fail to allocate shadow for module_alloc(). Now we have VM_NO_GUARD flag disabling guard page, so we need to pass into __vmalloc_node_range(). Add new parameter 'vm_flags' to __vmalloc_node_range() function. Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Konstantin Serebryany <kcc@google.com> Cc: Dmitry Chernenkov <dmitryc@google.com> Signed-off-by: Andrey Konovalov <adech.fo@gmail.com> Cc: Yuri Gribov <tetra2005@gmail.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Christoph Lameter <cl@linux.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-14mm: vmalloc: add flag preventing guard hole allocationAndrey Ryabinin
For instrumenting global variables KASan will shadow memory backing memory for modules. So on module loading we will need to allocate memory for shadow and map it at address in shadow that corresponds to the address allocated in module_alloc(). __vmalloc_node_range() could be used for this purpose, except it puts a guard hole after allocated area. Guard hole in shadow memory should be a problem because at some future point we might need to have a shadow memory at address occupied by guard hole. So we could fail to allocate shadow for module_alloc(). Add a new vm_struct flag 'VM_NO_GUARD' indicating that vm area doesn't have a guard hole. Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Konstantin Serebryany <kcc@google.com> Cc: Dmitry Chernenkov <dmitryc@google.com> Signed-off-by: Andrey Konovalov <adech.fo@gmail.com> Cc: Yuri Gribov <tetra2005@gmail.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Christoph Lameter <cl@linux.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-14kasan: enable stack instrumentationAndrey Ryabinin
Stack instrumentation allows to detect out of bounds memory accesses for variables allocated on stack. Compiler adds redzones around every variable on stack and poisons redzones in function's prologue. Such approach significantly increases stack usage, so all in-kernel stacks size were doubled. Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Konstantin Serebryany <kcc@google.com> Cc: Dmitry Chernenkov <dmitryc@google.com> Signed-off-by: Andrey Konovalov <adech.fo@gmail.com> Cc: Yuri Gribov <tetra2005@gmail.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Christoph Lameter <cl@linux.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-14x86_64: kasan: add interceptors for memset/memmove/memcpy functionsAndrey Ryabinin
Recently instrumentation of builtin functions calls was removed from GCC 5.0. To check the memory accessed by such functions, userspace asan always uses interceptors for them. So now we should do this as well. This patch declares memset/memmove/memcpy as weak symbols. In mm/kasan/kasan.c we have our own implementation of those functions which checks memory before accessing it. Default memset/memmove/memcpy now now always have aliases with '__' prefix. For files that built without kasan instrumentation (e.g. mm/slub.c) original mem* replaced (via #define) with prefixed variants, cause we don't want to check memory accesses there. Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Konstantin Serebryany <kcc@google.com> Cc: Dmitry Chernenkov <dmitryc@google.com> Signed-off-by: Andrey Konovalov <adech.fo@gmail.com> Cc: Yuri Gribov <tetra2005@gmail.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Christoph Lameter <cl@linux.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>