summaryrefslogtreecommitdiff
path: root/net/batman-adv
AgeCommit message (Collapse)Author
2015-08-27batman-adv: turn batadv_neigh_node_get() into local functionMarek Lindner
commit c214ebe1eb29 ("batman-adv: move neigh_node list add into batadv_neigh_node_new()") removed external calls to batadv_neigh_node_get(). Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-08-27batman-adv: Add lower layer needed_(head|tail)room to own onesSven Eckelmann
The maximum of hard_header_len and maximum of all needed_(head|tail)room of all slave interfaces of a batman-adv device must be used to define the batman-adv device needed_(head|tail)room. This is required to avoid too small buffer problems when these slave devices try to send the encapsulated packet in a tx path without the possibility to resize the skbuff. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-08-27batman-adv: don't access unregistered net_device objectAntonio Quartulli
In batadv_hardif_disable_interface() there is a call to batadv_softif_destroy_sysfs() which in turns invokes unregister_netdevice() on the soft_iface. After this point we cannot rely on the soft_iface object anymore because it might get free'd by the netdev periodic routine at any time. For this reason the netdev_upper_dev_unlink(.., soft_iface) call is moved before the invocation of batadv_softif_destroy_sysfs() so that we can be sure that the soft_iface object is still valid. Signed-off-by: Antonio Quartulli <antonio@meshcoding.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-08-27batman-adv: Start new development cycleSimon Wunderlich
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-08-27batman-adv: fix gateway client style issuesSimon Wunderlich
commit 0511575c4d03 ("batman-adv: remove obsolete deleted attribute for gateway node") incorrectly added an empy line and forgot to remove an include. Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-08-27batman-adv: rearrange batadv_neigh_node_new() arguments to follow conventionMarek Lindner
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Acked-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-08-27batman-adv: remove obsolete deleted attribute for gateway nodeSimon Wunderlich
With rcu, the gateway node deleted attribute is not needed anymore. In fact, it may delay the free of the gateway node and its referenced structures. Therefore remove it altogether and simplify purging as well. Signed-off-by: Simon Wunderlich <simon@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-08-27batman-adv: move neigh_node list add into batadv_neigh_node_new()Marek Lindner
All batadv_neigh_node_* functions expect the neigh_node list item to be part of the orig_node->neigh_list, therefore the constructor of said list item should be adding the newly created neigh_node to the respective list. Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Acked-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-08-27batman-adv: remove redundant hard_iface assignmentMarek Lindner
The batadv_neigh_node_new() function already sets the hard_iface pointer. Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Acked-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-08-27batman-adv: move hardif refcount inc to batadv_neigh_node_new()Marek Lindner
The batadv_neigh_node cleanup function 'batadv_neigh_node_free_rcu()' takes care of reducing the hardif refcounter, hence it's only logical to assume the creating function of that same object 'batadv_neigh_node_new()' takes care of increasing the same refcounter. Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Acked-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-08-24batman-adv: beautify supported routing algorithm listMarek Lindner
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-08-24batman-adv: Fix conditional statements indentationSven Eckelmann
commit 29b9256e6631 ("batman-adv: consider outgoing interface in OGM sending") incorrectly indented the interface check code. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-08-24batman-adv: Add lockdep_asserts for documented external locksSven Eckelmann
Some functions already have documentation about locks they require inside their kerneldoc header. These can be directly tested during runtime using the lockdep asserts. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-08-24batman-adv: Annotate deleting functions with external lock via lockdepSven Eckelmann
Functions which use (h)list_del* are requiring correct locking when they operate on global lists. Most of the time the search in the list and the delete are done in the same function. All other cases should have it visible that they require a special lock to avoid race conditions. Lockdep asserts can be used to check these problem during runtime when the lockdep functionality is enabled. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-08-24batman-adv: convert bat_priv->tt.req_list to hlistMarek Lindner
Since the list's tail is never accessed using a double linked list head wastes memory. Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-08-24batman-adv: Fix gw_bandwidth calculation on 32 bit systemsSven Eckelmann
The TVLV for the gw_bandwidth stores everything as u32. But the gw_bandwidth reads the signed long which limits the maximum value to (2 ** 31 - 1) on systems with 4 byte long. Also the input value is always converted from either Mibit/s or Kibit/s to 100Kibit/s. This reduces the values even further when the user sets it via the default unit Kibit/s. It may even cause an integer overflow and end up with a value the user never intended. Instead read the values as u64, check for possible overflows, do the unit adjustments and then reduce the size to u32. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-08-24batman-adv: Return EINVAL on invalid gw_bandwidth changeSven Eckelmann
Invalid speed settings by the user are currently acknowledged as correct but not stored. Instead the return of the store operation of the file "gw_bandwidth" should indicate that the given value is not acceptable. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-08-24batman-adv: prevent potential hlist double deletionMarek Lindner
The hlist_del_rcu() call in batadv_tt_global_size_mod() does not check if the element still is part of the list prior to deletion. The atomic list counter should prevent the worst but converting to hlist_del_init_rcu() ensures the element can't be deleted more than once. Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-08-24batman-adv: convert orig_node->vlan_list to hlistMarek Lindner
Since the list's tail is never accessed using a double linked list head wastes memory. Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-08-24batman-adv: Remove batadv_ types forward declarationsSven Eckelmann
main.h is included in every file and is the only way to access types.h. This makes forward declarations for all types defined in types.h unnecessary. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-08-24batman-adv: rename batadv_new_tt_req_node to batadv_tt_req_node_newMarek Lindner
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-08-24batman-adv: update kernel doc of batadv_tt_global_del_orig_entry()Marek Lindner
The updated kernel doc & additional comment shall prevent accidental copy & paste errors or calling the function without the required precautions. Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-08-24batman-adv: Remove multiple assignment per lineSven Eckelmann
The Linux CodingStyle disallows multiple assignments in a single line. (see chapter 1) Reported-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-08-24batman-adv: Fix kerneldoc over 80 column linesSven Eckelmann
Kerneldoc required single line documentation in the past (before 2009). Therefore, the 80 columns limit per line check of checkpatch was disabled for kerneldoc. But kerneldoc is not excluded anymore from it and checkpatch now enabled the check again. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-08-24batman-adv: Replace C99 int types with kernel typeSven Eckelmann
(s|u)(8|16|32|64) are the preferred types in the kernel. The use of the standard C99 types u?int(8|16|32|64)_t are objected by some people and even checkpatch now warns about using them. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-08-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/usb/qmi_wwan.c Overlapping additions of new device IDs to qmi_wwan.c Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-19batman-adv: Fix memory leak on tt add with invalid vlanSven Eckelmann
The object tt_local is allocated with kmalloc and not initialized when the function batadv_tt_local_add checks for the vlan. But this function can only cleanup the object when the (not yet initialized) reference counter of the object is 1. This is unlikely and thus the object would leak when the vlan could not be found. Instead the uninitialized object tt_local has to be freed manually and the pointer has to set to NULL to avoid calling the function which would try to decrement the reference counter of the not existing object. CID: 1316518 Fixes: 354136bcc3c4 ("batman-adv: fix kernel crash due to missing NULL checks") Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-18net: batman-adv: convert to using IFF_NO_QUEUEPhil Sutter
Signed-off-by: Phil Sutter <phil@nwl.cc> Cc: Marek Lindner <mareklindner@neomailbox.ch> Cc: Simon Wunderlich <sw@simonwunderlich.de> Cc: Antonio Quartulli <antonio@meshcoding.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-17Merge tag 'batman-adv-for-davem' of git://git.open-mesh.org/linux-mergeDavid S. Miller
Antonio Quartulli says: ==================== Included changes: - avoid integer overflow in GW selection routine - prevent race condition by making capability bit changes atomic (use clear/set/test_bit) - fix synchronization issue in mcast tvlv handler - fix crash on double list removal of TT Request objects - fix leak by puring packets enqueued for sending upon iface removal - ensure network header pointer is set in skb ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-14batman-adv: Fix potentially broken skb network header accessLinus Lüssing
The two commits noted below added calls to ip_hdr() and ipv6_hdr(). They need a correctly set skb network header. Unfortunately we cannot rely on the device drivers to set it for us. Therefore setting it in the beginning of the according ndo_start_xmit handler. Fixes: 1d8ab8d3c176 ("batman-adv: Modified forwarding behaviour for multicast packets") Fixes: ab49886e3da7 ("batman-adv: Add IPv4 link-local/IPv6-ll-all-nodes multicast support") Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-08-14batman-adv: remove broadcast packets scheduled for purged outgoing ifSimon Wunderlich
When an interface is purged, the broadcast packets scheduled for this interface should get purged as well. Signed-off-by: Simon Wunderlich <simon@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-08-14batman-adv: protect tt request from double deletionMarek Lindner
The list_del() calls were changed to list_del_init() to prevent an accidental double deletion in batadv_tt_req_node_new(). Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-08-14batman-adv: Fix potential synchronization issues in mcast tvlv handlerLinus Lüssing
So far the mcast tvlv handler did not anticipate the processing of multiple incoming OGMs from the same originator at the same time. This can lead to various issues: * Broken refcounting: For instance two mcast handlers might both assume that an originator just got multicast capabilities and will together wrongly decrease mcast.num_disabled by two, potentially leading to an integer underflow. * Potential kernel panic on hlist_del_rcu(): Two mcast handlers might one after another try to do an hlist_del_rcu(&orig->mcast_want_all_*_node). The second one will cause memory corruption / crashes. (Reported by: Sven Eckelmann <sven@narfation.org>) Right in the beginning the code path makes assumptions about the current multicast related state of an originator and bases all updates on that. The easiest and least error prune way to fix the issues in this case is to serialize multiple mcast handler invocations with a spinlock. Fixes: 60432d756cf0 ("batman-adv: Announce new capability via multicast TVLV") Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-08-14batman-adv: Make MCAST capability changes atomicLinus Lüssing
Bitwise OR/AND assignments in C aren't guaranteed to be atomic. One OGM handler might undo the set/clear of a specific bit from another handler run in between. Fix this by using the atomic set_bit()/clear_bit()/test_bit() functions. Fixes: 60432d756cf0 ("batman-adv: Announce new capability via multicast TVLV") Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-08-14batman-adv: Make TT capability changes atomicLinus Lüssing
Bitwise OR/AND assignments in C aren't guaranteed to be atomic. One OGM handler might undo the set/clear of a specific bit from another handler run in between. Fix this by using the atomic set_bit()/clear_bit()/test_bit() functions. Fixes: e17931d1a61d ("batman-adv: introduce capability initialization bitfield") Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-08-14batman-adv: Make NC capability changes atomicLinus Lüssing
Bitwise OR/AND assignments in C aren't guaranteed to be atomic. One OGM handler might undo the set/clear of a specific bit from another handler run in between. Fix this by using the atomic set_bit()/clear_bit()/test_bit() functions. Fixes: 3f4841ffb336 ("batman-adv: tvlv - add network coding container") Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-08-14batman-adv: Make DAT capability changes atomicLinus Lüssing
Bitwise OR/AND assignments in C aren't guaranteed to be atomic. One OGM handler might undo the set/clear of a specific bit from another handler run in between. Fix this by using the atomic set_bit()/clear_bit()/test_bit() functions. Fixes: 17cf0ea455f1 ("batman-adv: tvlv - add distributed arp table container") Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-08-11batman-adv: Avoid u32 overflow during gateway selectRuben Wisniewski
The gateway selection based on fast connections is using a single value calculated from the average tq (0-255) and the download bandwidth (in 100Kibit). The formula for the first step (tq ** 2 * 10000 * bandwidth) tends to overflow a u32 with low bandwidth settings like 50 [100KiBit] and a tq value of over 92. Changing this to a 64 bit unsigned integer allows to support a bandwidth_down with up to ~2.8e10 [100KiBit] and a perfect tq of 255. This is ~6.6 times higher than the maximum possible value of the gateway announcement TVLV. This problem only affects the non-default gw_sel_class 1. Signed-off-by: Ruben Wisniewsi <ruben@vfn-nrw.de> [sven@narfation.org: rewritten commit message] Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-08-11batman-adv: Replace gw_reselect divisor with simple shiftSven Eckelmann
The gw_factor is divided by BATADV_TQ_LOCAL_WINDOW_SIZE ** 2 * 64. But the rest of the calculation has nothing to do with the tq window size and therefore the calculation is just (tmp_gw_factor / (64 ** 3)). Replace it with a simple shift to avoid a costly 64-bit divide when the max_gw_factor is changed from u32 to u64. This type change is necessary to avoid an overflow bug. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-08-04batman-adv: initialize up/down values when adding a gatewaySimon Wunderlich
Without this initialization, gateways which actually announce up/down bandwidth of 0/0 could be added. If these nodes get purged via _batadv_purge_orig() later, the gw_node structure does not get removed since batadv_gw_node_delete() updates the gw_node with up/down bandwidth of 0/0, and the updating function then discards the change and does not free gw_node. This results in leaking the gw_node structures, which references other structures: gw_node -> orig_node -> orig_node_ifinfo -> hardif. When removing the interface later, the open reference on the hardif may cause hangs with the infamous "unregister_netdevice: waiting for mesh1 to become free. Usage count = 1" message. Signed-off-by: Simon Wunderlich <simon@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-08-04batman-adv: protect tt_local_entry from concurrent delete eventsMarek Lindner
The tt_local_entry deletion performed in batadv_tt_local_remove() was neither protecting against simultaneous deletes nor checking whether the element was still part of the list before calling hlist_del_rcu(). Replacing the hlist_del_rcu() call with batadv_hash_remove() provides adequate protection via hash spinlocks as well as an is-element-still-in-hash check to avoid 'blind' hash removal. Fixes: 068ee6e204e1 ("batman-adv: roaming handling mechanism redesign") Reported-by: alfonsname@web.de Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-08-04batman-adv: fix kernel crash due to missing NULL checksMarek Lindner
batadv_softif_vlan_get() may return NULL which has to be verified by the caller. Fixes: 35df3b298fc8 ("batman-adv: fix TT VLAN inconsistency on VLAN re-add") Reported-by: Ryan Thompson <ryan@eero.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-08-04batman-adv: avoid DAT to mess up LAN stateAntonio Quartulli
When a node running DAT receives an ARP request from the LAN for the first time, it is likely that this node will request the ARP entry through the distributed ARP table (DAT) in the mesh. Once a DAT reply is received the asking node must check if the MAC address for which the IP address has been asked is local. If it is, the node must drop the ARP reply bceause the client should have replied on its own locally. Forwarding this reply means fooling any L2 bridge (e.g. Ethernet switches) lying between the batman-adv node and the LAN. This happens because the L2 bridge will think that the client sending the ARP reply lies somewhere in the mesh, while this node is sitting in the same LAN. Reported-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-06-07batman-adv: change the MAC of each VLAN upon ndo_set_mac_addressAntonio Quartulli
The MAC address of the soft-interface is used to initialise the "non-purge" TT entry of each existing VLAN. Therefore when the user invokes ndo_set_mac_address() all the "non-purge" TT entries have to be updated, not only the one belonging to the non-tagged network. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-06-07batman-adv: Remove unused post-VLAN ethhdr in batadv_gw_dhcp_recipient_getSven Eckelmann
Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-06-07batman-adv: Clarify calculation precedence for '&' and '?'Sven Eckelmann
Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-06-07batman-adv: Add required includes to all filesSven Eckelmann
The header files could not be build indepdent from each other. This is happened because headers didn't include the files for things they've used. This was problematic because the success of a build depended on the knowledge about the right order of local includes. Also source files were not including everything they've used explicitly. Instead they required that transitive includes are always stable. This is problematic because some transitive includes are not obvious, depend on config settings and may not be stable in the future. The order for include blocks are: * primary headers (main.h and the *.h file of a *.c file) * global linux headers * required local headers * extra forward declarations for pointers in function/struct declarations The only exceptions are linux/bitops.h and linux/if_ether.h in packet.h. This header file is shared with userspace applications like batctl and must therefore build together with userspace applications. The header linux/bitops.h is not part of the uapi headers and linux/if_ether.h conflicts with the musl implementation of netinet/if_ether.h. The maintainers rejected the use of __KERNEL__ preprocessor checks and thus these two headers are only in main.h. All files using packet.h first have to include main.h to work correctly. Reported-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-06-07batman-adv: add bat_neigh_free APIAntonio Quartulli
This API has to be used to let any routing protocol free neighbor specific allocated resources Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-06-07batman-adv: split name from variable for uint mesh attributesAntonio Quartulli
Some mesh attributes are behind substructs in the batadv_priv object and for this reason the name cannot be used anymore to refer to them. This patch allows to specify the variable name where the attribute is stored inside batadv_priv instead of using the name Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-06-07batman-adv: Use common Jenkins Hash implementationSven Eckelmann
An unoptimized version of the Jenkins one-at-a-time hash function is used and partially copied all over the code wherever an hashtable is used. Instead the optimized version shared between the whole kernel should be used to reduce code duplication and use better optimized code. Only the DAT code must use the old implementation because it is used as distributed hash function which has to be common for all nodes. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>