summaryrefslogtreecommitdiff
path: root/net/batman-adv
AgeCommit message (Collapse)Author
2016-05-18batman-adv: initialize ELP orig address on secondary interfacesMarek Lindner
This fix prevents nodes to wrongly create a 00:00:00:00:00:00 originator which can potentially interfere with the rest of the neighbor statistics. Fixes: d6f94d91f766 ("batman-adv: ELP - adding basic infrastructure") Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-05-18batman-adv: Avoid duplicate neigh_node additionsLinus Lüssing
Two parallel calls to batadv_neigh_node_new() might race for creating and adding the same neig_node. Fix this by including the check for any already existing, identical neigh_node within the spin-lock. This fixes splats like the following: [ 739.535069] ------------[ cut here ]------------ [ 739.535079] WARNING: CPU: 0 PID: 0 at /usr/src/batman-adv/git/batman-adv/net/batman-adv/bat_iv_ogm.c:1004 batadv_iv_ogm_process_per_outif+0xe3f/0xe60 [batman_adv]() [ 739.535092] too many matching neigh_nodes [ 739.535094] Modules linked in: dm_mod tun ip6table_filter ip6table_mangle ip6table_nat nf_nat_ipv6 ip6_tables xt_nat iptable_nat nf_nat_ipv4 nf_nat xt_TCPMSS xt_mark iptable_mangle xt_tcpudp xt_conntrack iptable_filter ip_tables x_tables ip_gre ip_tunnel gre bridge stp llc thermal_sys kvm_intel kvm crct10dif_pclmul crc32_pclmul sha256_ssse3 sha256_generic hmac drbg ansi_cprng aesni_intel aes_x86_64 lrw gf128mul glue_helper ablk_helper cryptd evdev pcspkr ip6_gre ip6_tunnel tunnel6 batman_adv(O) libcrc32c nf_conntrack_ipv6 nf_defrag_ipv6 nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack autofs4 ext4 crc16 mbcache jbd2 xen_netfront xen_blkfront crc32c_intel [ 739.535177] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W O 4.2.0-0.bpo.1-amd64 #1 Debian 4.2.6-3~bpo8+2 [ 739.535186] 0000000000000000 ffffffffa013b050 ffffffff81554521 ffff88007d003c18 [ 739.535201] ffffffff8106fa01 0000000000000000 ffff8800047a087a ffff880079c3a000 [ 739.735602] ffff88007b82bf40 ffff88007bc2d1c0 ffffffff8106fa7a ffffffffa013aa8e [ 739.735624] Call Trace: [ 739.735639] <IRQ> [<ffffffff81554521>] ? dump_stack+0x40/0x50 [ 739.735677] [<ffffffff8106fa01>] ? warn_slowpath_common+0x81/0xb0 [ 739.735692] [<ffffffff8106fa7a>] ? warn_slowpath_fmt+0x4a/0x50 [ 739.735715] [<ffffffffa012448f>] ? batadv_iv_ogm_process_per_outif+0xe3f/0xe60 [batman_adv] [ 739.735740] [<ffffffffa0124813>] ? batadv_iv_ogm_receive+0x363/0x380 [batman_adv] [ 739.735762] [<ffffffffa0124813>] ? batadv_iv_ogm_receive+0x363/0x380 [batman_adv] [ 739.735783] [<ffffffff810b0841>] ? __raw_callee_save___pv_queued_spin_unlock+0x11/0x20 [ 739.735804] [<ffffffffa012cb39>] ? batadv_batman_skb_recv+0xc9/0x110 [batman_adv] [ 739.735825] [<ffffffff81464891>] ? __netif_receive_skb_core+0x841/0x9a0 [ 739.735838] [<ffffffff810b0841>] ? __raw_callee_save___pv_queued_spin_unlock+0x11/0x20 [ 739.735853] [<ffffffff81465681>] ? process_backlog+0xa1/0x140 [ 739.735864] [<ffffffff81464f1a>] ? net_rx_action+0x20a/0x320 [ 739.735878] [<ffffffff81073aa7>] ? __do_softirq+0x107/0x270 [ 739.735891] [<ffffffff81073d82>] ? irq_exit+0x92/0xa0 [ 739.735905] [<ffffffff8137e0d1>] ? xen_evtchn_do_upcall+0x31/0x40 [ 739.735924] [<ffffffff8155b8fe>] ? xen_do_hypervisor_callback+0x1e/0x40 [ 739.735939] <EOI> [<ffffffff810013aa>] ? xen_hypercall_sched_op+0xa/0x20 [ 739.735965] [<ffffffff810013aa>] ? xen_hypercall_sched_op+0xa/0x20 [ 739.735979] [<ffffffff8100a39c>] ? xen_safe_halt+0xc/0x20 [ 739.735991] [<ffffffff8101da6c>] ? default_idle+0x1c/0xa0 [ 739.736004] [<ffffffff810abf6b>] ? cpu_startup_entry+0x2eb/0x350 [ 739.736019] [<ffffffff81b2af5e>] ? start_kernel+0x480/0x48b [ 739.736032] [<ffffffff81b2d116>] ? xen_start_kernel+0x507/0x511 [ 739.736048] ---[ end trace c106bb901244bc8c ]--- Fixes: f987ed6ebd99 ("batman-adv: protect neighbor list with rcu locks") Reported-by: Martin Weinelt <martin@darmstadt.freifunk.net> Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-05-18batman-adv: Fix integer overflow in batadv_iv_ogm_calc_tqSven Eckelmann
The undefined behavior sanatizer detected an signed integer overflow in a setup with near perfect link quality UBSAN: Undefined behaviour in net/batman-adv/bat_iv_ogm.c:1246:25 signed integer overflow: 8713350 * 255 cannot be represented in type 'int' The problems happens because the calculation of mixed unsigned and signed integers resulted in an integer multiplication. batadv_ogm_packet::tq (u8 255) * tq_own (u8 255) * tq_asym_penalty (int 134; max 255) * tq_iface_penalty (int 255; max 255) The tq_iface_penalty, tq_asym_penalty and inv_asym_penalty can just be changed to unsigned int because they are not expected to become negative. Fixes: c039876892e3 ("batman-adv: add WiFi penalty") Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-05-18batman-adv: make sure ELP/OGM orig MAC is updated on address changeAntonio Quartulli
When the MAC address of the primary interface is changed, update the originator address in the ELP and OGM skb buffers as well in order to reflect the change. Fixes: d6f94d91f766 ("batman-adv: ELP - adding basic infrastructure") Reported-by: Marek Lindner <marek@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-05-18batman-adv: Fix unexpected free of bcast_own on add_if errorSven Eckelmann
The function batadv_iv_ogm_orig_add_if allocates new buffers for bcast_own and bcast_own_sum. It is expected that these buffers are unchanged in case either bcast_own or bcast_own_sum couldn't be resized. But the error handling of this function frees the already resized buffer for bcast_own when the allocation of the new bcast_own_sum buffer failed. This will lead to an invalid memory access when some code will try to access bcast_own. Instead the resized new bcast_own buffer has to be kept. This will not lead to problems because the size of the buffer was only increased and therefore no user of the buffer will try to access bytes outside of the new buffer. Fixes: d0015fdd3d2c ("batman-adv: provide orig_node routing API") Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-05-18batman-adv: Fix refcnt leak in batadv_v_neigh_*Sven Eckelmann
The functions batadv_neigh_ifinfo_get increase the reference counter of the batadv_neigh_ifinfo. These have to be reduced again when the reference is not used anymore to correctly free the objects. Fixes: 9786906022eb ("batman-adv: B.A.T.M.A.N. V - implement neighbor comparison API calls") Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-05-18batman-adv: Avoid nullptr derefence in batadv_v_neigh_is_sobSven Eckelmann
batadv_neigh_ifinfo_get can return NULL when it cannot find (even when only temporarily) anymore the neigh_ifinfo in the list neigh->ifinfo_list. This has to be checked to avoid kernel Oopses when the ifinfo is dereferenced. This a situation which isn't expected but is already handled by functions like batadv_v_neigh_cmp. The same kind of warning is therefore used before the function returns without dereferencing the pointers. Fixes: 9786906022eb ("batman-adv: B.A.T.M.A.N. V - implement neighbor comparison API calls") Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-05-18batman-adv: fix skb deref after freeFlorian Westphal
batadv_send_skb_to_orig() calls dev_queue_xmit() so we can't use skb->len. Fixes: 953324776d6d ("batman-adv: network coding - buffer unicast packets before forward") Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-05-10batman-adv: use batadv_compare_eth when possibleAntonio Quartulli
When comparing Ethernet address it is better to use the more generic batadv_compare_eth. The latter is also optimised for architectures having a fast unaligned access. Signed-off-by: Antonio Quartulli <a@unstable.cc> [sven@narfation.org: fix conflicts with current version] Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2016-05-10batman-adv: replace ethertype variable with ETH_P_BATMAN for readabilityMarek Lindner
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Reviewed-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-05-10batman-adv: Use bool as return type for boolean functionsSven Eckelmann
It is easier to understand that the returned value of a specific function doesn't have to be 0 when the functions was successful when the actual return type is bool. This is especially true when all surrounding functions with return type int use negative values to return the error code. Reported-by: Nicholas Krause <xerofoify@gmail.com> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-05-10batman-adv: Use kref_get for _batadv_update_routeSven Eckelmann
_batadv_update_route requires that the caller already has a valid reference for neigh_node. It is therefore not possible that it has an reference counter of 0 and was still given to this function The kref_get function instead WARNs (with debug information) when the reference counter would still be 0. This makes a bug in batman-adv better visible because kref_get_unless_zero would have ignored this problem. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-05-10batman-adv: Use kref_get for hard_iface subfunctionsSven Eckelmann
The callers of the functions using batadv_hard_iface objects already make sure that they hold a valid reference. The subfunctions don't have to check whether the reference counter is > 0 because this was checked by the callers. The kref_get function instead WARNs (with debug information) when the reference counter would still be 0. This makes a bug in batman-adv better visible because kref_get_unless_zero would have ignored this problem. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-05-10batman-adv: Use kref_get for batadv_gw_node_addSven Eckelmann
batadv_gw_node_add requires that the caller already has a valid reference for orig_node. It is therefore not possible that it has an reference counter of 0 and was still given to this function The kref_get function instead WARNs (with debug information) when the reference counter would still be 0. This makes a bug in batman-adv better visible because kref_get_unless_zero would have ignored this problem. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-05-10batman-adv: Use kref_get for batadv_gw_selectSven Eckelmann
batadv_gw_select requires that the caller already has a valid reference for new_gw_node. It is therefore not possible that it has an reference counter of 0 and was still given to this function The kref_get function instead WARNs (with debug information) when the reference counter would still be 0. This makes a bug in batman-adv better visible because kref_get_unless_zero would have ignored this problem. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-05-10batman-adv: Use kref_get for batadv_nc_get_nc_nodeSven Eckelmann
batadv_nc_get_nc_node requires that the caller already has a valid reference for orig_neigh_node. It is therefore not possible that it has an reference counter of 0 and was still given to this function The kref_get function instead WARNs (with debug information) when the reference counter would still be 0. This makes a bug in batman-adv better visible because kref_get_unless_zero would have ignored this problem. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-05-10batman-adv: Use kref_get for batadv_tvlv_container_getSven Eckelmann
batadv_tvlv_container_get requires that tvlv.container_list_lock is held by the caller. It is therefore not possible that an item in tvlv.container_list has an reference counter of 0 and is still in the list The kref_get function instead WARNs (with debug information) when the reference counter would still be 0. This makes a bug in batman-adv better visible because kref_get_unless_zero would have ignored this problem. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-05-10batman-adv: Increase hard_iface refcnt for ptypeSven Eckelmann
The hard_iface is referenced in the packet_type for batman-adv. Increase the refcounter of the hard_interface for it to have an explicit reference for it in case this functionality gets refactorted and the currently used implicit reference for it will be removed. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-05-10batman-adv: Check hard_iface refcnt when receiving skbSven Eckelmann
The receive function may start processing an incoming packet while the hard_iface is shut down in a different context. All called functions called with the batadv_hard_iface object belonging to the incoming interface would have to check whether the reference counter is still > 0. This is rather error-prone because this check can be forgotten easily. Instead check the reference counter when receiving the object to make sure that all called functions have a valid reference. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-05-10batman-adv: Check hard_iface refcnt before calling functionSven Eckelmann
The batadv_hardif_list list is checked in many situations and the items in this list are given to specialized functions to modify the routing behavior. At the moment each of these called functions has to check itself whether the received batadv_hard_iface has a refcount > 0 before it can increase the reference counter and use it in other objects. This can easily lead to problems because it is not easily visible where all callers of a function got the batadv_hard_iface object from and whether they already hold a valid reference. Checking the reference counter directly before calling a subfunction with a pointer from the batadv_hardif_list avoids this problem. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-05-10batman-adv: add detection for complex bridge loopsSimon Wunderlich
There are network setups where the current bridge loop avoidance can't detect bridge loops. The minimal setup affected would consist of two LANs and two separate meshes, connected in a ring like that: A...(mesh1)...B | | (LAN1) (LAN2) | | C...(mesh2)...D Since both the meshes and backbones are separate, the bridge loop avoidance has not enough information to detect and avoid the loop in this case. Even if these scenarios can't be fixed easily, these kind of loops can be detected. This patch implements a periodic check (running every 60 seconds for now) which sends a broadcast frame with a random MAC address on each backbone VLAN. If a broadcast frame with the same MAC address is received shortly after on the mesh, we know that there must be a loop and report that incident as well as throw an uevent to let others handle that problem. Signed-off-by: Simon Wunderlich <simon.wunderlich@open-mesh.com> [sven@narfation.org: fix conflicts with current version] Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-05-10batman-adv: Create batman soft interfaces within correct netns.Andrew Lunn
When creating a soft interface, create it in the same netns as the hard interface. Replace all references to init_net with the correct name space for the interface being manipulated. Suggested-by: Daniel Ehlers <danielehlers@mindeye.net> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Antonio Quartulli <a@unstable.cc> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-05-10batman-adv: NETIF_F_NETNS_LOCAL feature to prevent netns movesAndrew Lunn
The batX soft interface should not be moved between network name spaces. This is similar to bridges, bonds, tunnels, which are not allowed to move between network namespaces. Suggested-by: Daniel Ehlers <danielehlers@mindeye.net> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Antonio Quartulli <a@unstable.cc> Reviewed-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-05-10batman-adv: Remove hdr_size skb size check in batadv_interface_rxSven Eckelmann
The callers of batadv_interface_rx have to make sure that enough data can be pulled from the skb when they read the batman-adv header. The only two functions using it are either calling pskb_may_pull with hdr_size directly (batadv_recv_bcast_packet) or indirectly via batadv_check_unicast_packet (batadv_recv_unicast_packet). Reported-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-05-10batman-adv: Remove unused parameter recv_if of batadv_interface_rxSven Eckelmann
Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-05-04Merge tag 'batman-adv-for-davem' of git://git.open-mesh.org/linux-mergeDavid S. Miller
Antonio Quartulli says: ==================== pull request: batman-adv 20160504 In this pull request you have: - two changes to the MAINTAINERS file where one marks our mailing list as moderated and the other adds a missing documentation file - kernel-doc fixes - code refactoring and various cleanups ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-04treewide: replace dev->trans_start update with helperFlorian Westphal
Replace all trans_start updates with netif_trans_update helper. change was done via spatch: struct net_device *d; @@ - d->trans_start = jiffies + netif_trans_update(d) Compile tested only. Cc: user-mode-linux-devel@lists.sourceforge.net Cc: linux-xtensa@linux-xtensa.org Cc: linux1394-devel@lists.sourceforge.net Cc: linux-rdma@vger.kernel.org Cc: netdev@vger.kernel.org Cc: MPT-FusionLinux.pdl@broadcom.com Cc: linux-scsi@vger.kernel.org Cc: linux-can@vger.kernel.org Cc: linux-parisc@vger.kernel.org Cc: linux-omap@vger.kernel.org Cc: linux-hams@vger.kernel.org Cc: linux-usb@vger.kernel.org Cc: linux-wireless@vger.kernel.org Cc: linux-s390@vger.kernel.org Cc: devel@driverdev.osuosl.org Cc: b.a.t.m.a.n@lists.open-mesh.org Cc: linux-bluetooth@vger.kernel.org Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Acked-by: Mugunthan V N <mugunthanvnm@ti.com> Acked-by: Antonio Quartulli <a@unstable.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-03batman-adv: Split batadv_iv_ogm_orig_del_if functionSven Eckelmann
batadv_iv_ogm_orig_del_if handles two different buffers bcast_own and bcast_own_sum which should be resized. The error handling two for allocating these buffers causes the complexity of this function. This can be avoided completely when the function is split into a main function handling the locking, freeing and call of the subfunctions. The subfunction can then independently handle the resize of the buffers. This also allows to easily reuse the old buffer (which always is larger) in case a smaller buffer could not be allocated without increasing the code complexity. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-05-03batman-adv: Merge batadv_v_ogm_orig_update into batadv_v_ogm_route_updateSimon Wunderlich
Since batadv_v_ogm_orig_update() was only called from one place and the calling function became very short, merge these two functions together. This should also reflect the protocol description of B.A.T.M.A.N. V better. Signed-off-by: Simon Wunderlich <simon@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-05-03batman-adv: move and restructure batadv_v_ogm_forwardSimon Wunderlich
To match our code better to the protocol description of B.A.T.M.A.N. V, move batadv_v_ogm_forward() out into batadv_v_ogm_process_per_outif() and move all checks directly deciding whether the OGM should be forwarded into batadv_v_ogm_forward(). Signed-off-by: Simon Wunderlich <simon@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-05-03batman-adv: fix debuginfo macro style issueSimon Wunderlich
Structure initialization within the macros should follow the general coding style used in the kernel: put the initialization of the first variable and the closing brace on a separate line. Reported-by: Antonio Quartulli <a@unstable.cc> Signed-off-by: Simon Wunderlich <simon.wunderlich@open-mesh.com> [sven@narfation.org: fix conflicts with current version] Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-05-03batman-adv: Fix function names on new line starting with '*'Sven Eckelmann
Some really long function names in batman-adv require a newline between return type and the function name. This has lead to some lines starting with *batadv_... This * belongs to the return type and thus should be on the same line as the return type. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-05-03batman-adv: Add kernel-doc for batadv_interface_rxSven Eckelmann
Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-05-03batman-adv: Fix kerneldoc for batadv_compare_claimSven Eckelmann
Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-05-03batman-adv: Fix checkpatch warning about 'unsigned' typeSven Eckelmann
checkpatch.pl warns about the use of 'unsigned' as a short form for 'unsigned int'. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-05-03batman-adv: fix wrong names in kerneldocAntonio Quartulli
Signed-off-by: Antonio Quartulli <a@unstable.cc> [sven@narfation.org: Fix additional names] Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2016-05-03batman-adv: use to_delayed_workGeliang Tang
Use to_delayed_work() instead of open-coding it. Signed-off-by: Geliang Tang <geliangtang@163.com> Reviewed-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-05-03batman-adv: use list_for_each_entry_safeGeliang Tang
Use list_for_each_entry_safe() instead of list_for_each_safe() to simplify the code. Signed-off-by: Geliang Tang <geliangtang@163.com> Acked-by: Antonio Quartulli <a@unstable.cc> Reviewed-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-05-03batman-adv: use static string for table headersAntonio Quartulli
Use a static string when showing table headers rather then a nonsense parametric one with fixed arguments. It is easier to grep and it does not need to be recomputed at runtime each time. Reported-by: Joe Perches <joe@perches.com> Signed-off-by: Antonio Quartulli <a@unstable.cc> [sven@narfation.org: fix conflicts with current version] Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2016-05-03batman-adv: Start new development cycleSimon Wunderlich
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-04-29batman-adv: Fix reference counting of hardif_neigh_node object for neigh_nodeSven Eckelmann
The batadv_neigh_node was specific to a batadv_hardif_neigh_node and held an implicit reference to it. But this reference was never stored in form of a pointer in the batadv_neigh_node itself. Instead batadv_neigh_node_release depends on a consistent state of hard_iface->neigh_list and that batadv_hardif_neigh_get always returns the batadv_hardif_neigh_node object which it has a reference for. But batadv_hardif_neigh_get cannot guarantee that because it is working only with rcu_read_lock on this list. It can therefore happen that a neigh_addr is in this list twice or that batadv_hardif_neigh_get cannot find the batadv_hardif_neigh_node for an neigh_addr due to some other list operations taking place at the same time. Instead add a batadv_hardif_neigh_node pointer directly in batadv_neigh_node which will be used for the reference counter decremented on release of batadv_neigh_node. Fixes: cef63419f7db ("batman-adv: add list of unique single hop neighbors per hard-interface") Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-04-29batman-adv: Fix reference counting of vlan object for tt_local_entrySven Eckelmann
The batadv_tt_local_entry was specific to a batadv_softif_vlan and held an implicit reference to it. But this reference was never stored in form of a pointer in the tt_local_entry itself. Instead batadv_tt_local_remove, batadv_tt_local_table_free and batadv_tt_local_purge_pending_clients depend on a consistent state of bat_priv->softif_vlan_list and that batadv_softif_vlan_get always returns the batadv_softif_vlan object which it has a reference for. But batadv_softif_vlan_get cannot guarantee that because it is working only with rcu_read_lock on this list. It can therefore happen that an vid is in this list twice or that batadv_softif_vlan_get cannot find the batadv_softif_vlan for an vid due to some other list operations taking place at the same time. Instead add a batadv_softif_vlan pointer directly in batadv_tt_local_entry which will be used for the reference counter decremented on release of batadv_tt_local_entry. Fixes: 35df3b298fc8 ("batman-adv: fix TT VLAN inconsistency on VLAN re-add") Signed-off-by: Sven Eckelmann <sven@narfation.org> Acked-by: Antonio Quartulli <a@unstable.cc> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-04-29batman-adv: B.A.T.M.A.N V - make sure iface is reactivated upon NETDEV_UP eventAntonio Quartulli
At the moment there is no explicit reactivation of an hard-interface upon NETDEV_UP event. In case of B.A.T.M.A.N. IV the interface is reactivated as soon as the next OGM is scheduled for sending, but this mechanism does not work with B.A.T.M.A.N. V. The latter does not rely on the same scheduling mechanism as its predecessor and for this reason the hard-interface remains deactivated forever after being brought down once. This patch fixes the reactivation mechanism by adding a new routing API which explicitly allows each algorithm to perform any needed operation upon interface re-activation. Such API is optional and is implemented by B.A.T.M.A.N. V only and it just takes care of setting the iface status to ACTIVE Signed-off-by: Antonio Quartulli <a@unstable.cc> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2016-04-29batman-adv: fix DAT candidate selection (must use vid)Antonio Quartulli
Now that DAT is VLAN aware, it must use the VID when computing the DHT address of the candidate nodes where an entry is going to be stored/retrieved. Fixes: be1db4f6615b ("batman-adv: make the Distributed ARP Table vlan aware") Signed-off-by: Antonio Quartulli <a@unstable.cc> [sven@narfation.org: fix conflicts with current version] Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2016-04-24batman-adv: Fix broadcast/ogm queue limit on a removed interfaceLinus Lüssing
When removing a single interface while a broadcast or ogm packet is still pending then we will free the forward packet without releasing the queue slots again. This patch is supposed to fix this issue. Fixes: 6d5808d4ae1b ("batman-adv: Add missing hardif_free_ref in forw_packet_free") Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> [sven@narfation.org: fix conflicts with current version] Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-04-24batman-adv: Reduce refcnt of removed router when updating routeSven Eckelmann
_batadv_update_route rcu_derefences orig_ifinfo->router outside of a spinlock protected region to print some information messages to the debug log. But this pointer is not checked again when the new pointer is assigned in the spinlock protected region. Thus is can happen that the value of orig_ifinfo->router changed in the meantime and thus the reference counter of the wrong router gets reduced after the spinlock protected region. Just rcu_dereferencing the value of orig_ifinfo->router inside the spinlock protected region (which also set the new pointer) is enough to get the correct old router object. Fixes: e1a5382f978b ("batman-adv: Make orig_node->router an rcu protected pointer") Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-04-24batman-adv: Deactivate TO_BE_ACTIVATED hardif on shutdownSven Eckelmann
The shutdown of an batman-adv interface can happen with one of its slave interfaces still being in the BATADV_IF_TO_BE_ACTIVATED state. A possible reason for it is that the routing algorithm BATMAN_V was selected and batadv_schedule_bat_ogm was not yet called for this interface. This slave interface still has to be set to BATADV_IF_INACTIVE or the batman-adv interface will never reduce its usage counter and thus never gets shutdown. This problem can be simulated via: $ modprobe dummy $ modprobe batman-adv routing_algo=BATMAN_V $ ip link add bat0 type batadv $ ip link set dummy0 master bat0 $ ip link set dummy0 up $ ip link del bat0 unregister_netdevice: waiting for bat0 to become free. Usage count = 3 Reported-by: Matthias Schiffer <mschiffer@universe-factory.net> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-04-24batman-adv: init neigh node last seen fieldMarek Lindner
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> [sven@narfation.org: fix conflicts with current version] Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-04-24batman-adv: Check skb size before using encapsulated ETH+VLAN headerSven Eckelmann
The encapsulated ethernet and VLAN header may be outside the received ethernet frame. Thus the skb buffer size has to be checked before it can be parsed to find out if it encapsulates another batman-adv packet. Fixes: 420193573f11 ("batman-adv: softif bridge loop avoidance") Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-03-02batman-adv: clarify CFG80211 dependencyArnd Bergmann
The driver calls cfg80211_get_station, which may be part of a module, so we must not enable BATMAN_ADV_BATMAN_V if BATMAN_ADV=y and CFG80211=m: net/built-in.o: In function `batadv_v_elp_get_throughput': (text+0x5c62c): undefined reference to `cfg80211_get_station' This clarifies the dependency to cover all combinations. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: c833484e5f38 ("batman-adv: ELP - compute the metric based on the estimated throughput") Acked-by: Antonio Quartulli <a@unstable.cc> Signed-off-by: David S. Miller <davem@davemloft.net>