summaryrefslogtreecommitdiff
path: root/net/bluetooth/hci_sock.c
AgeCommit message (Collapse)Author
2017-05-20Bluetooth: Fix user channel for 32bit userspace on 64bit kernelSzymon Janc
commit ab89f0bdd63a3721f7cd3f064f39fc4ac7ca14d4 upstream. Running 32bit userspace on 64bit kernel results in MSG_CMSG_COMPAT being defined as 0x80000000. This results in sendmsg failure if used from 32bit userspace running on 64bit kernel. Fix this by accounting for MSG_CMSG_COMPAT in flags check in hci_sock_sendmsg. Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl> Signed-off-by: Marko Kiiskila <marko@runtime.io> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-19Bluetooth: Send control open and close messages for HCI user channelsMarcel Holtmann
When opening and closing HCI user channel, send monitoring messages to be able to trace its behavior. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-09-19Bluetooth: Handle HCI raw socket transition from unbound to boundMarcel Holtmann
In case an unbound HCI raw socket is later on bound, ensure that the monitor notification messages indicate a close and re-open. None of the userspace tools use the socket this, but it is actually possible to use an ioctl on an unbound socket and then later bind it. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-09-19Bluetooth: Send control open and close messages for HCI raw socketsMarcel Holtmann
When opening and closing HCI raw sockets their main usage is for legacy userspace. To track interaction with the modern mgmt interface, send open and close monitoring messages for these action. The HCI raw sockets is special since it supports unbound ioctl operation and for that special case delay the notification message until at least one ioctl has been executed. The difference between a bound and unbound socket will be detailed by the fact the HCI index is present or not. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-09-19Bluetooth: Add extra channel checks for control open/close messagesMarcel Holtmann
The control open and close monitoring events require special channel checks to ensure messages are only send when the right events happen. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-09-19Bluetooth: Assign the channel early when binding HCI socketsMarcel Holtmann
Assignment of the hci_pi(sk)->channel should be done early when binding the HCI socket. This avoids confusion with the RAW channel that is used for legacy access. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-09-19Bluetooth: Send control open and close only when cookie is presentMarcel Holtmann
Only when the cookie has been assigned, then send the open and close monitor messages. Also if the socket is bound to a device, then include the index into the message. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-09-19Bluetooth: Use numbers for subsystem version stringMarcel Holtmann
Instead of keeping a version string around, use version and revision numbers and then stringify them for use as module parameter. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-09-19Bluetooth: Introduce helper functions for socket cookie handlingMarcel Holtmann
Instead of manually allocating cookie information each time, use helper functions for generating and releasing cookies. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-09-19Bluetooth: Use individual flags for certain management eventsMarcel Holtmann
Instead of hiding everything behind a general managment events flag, introduce indivdual flags that allow fine control over which events are send to a given management channel. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-09-19Bluetooth: Add support for sending MGMT commands and events to monitorMarcel Holtmann
This adds support for tracing all management commands and events via the monitor interface. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-09-19Bluetooth: Add support for sending MGMT open and close to monitorMarcel Holtmann
This sends new notifications to the monitor support whenever a management channel has been opened or closed. This allows tracing of control channels really easily. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-09-19Bluetooth: Store control socket cookie and comm informationMarcel Holtmann
To further allow unique identification and tracking of control socket, store cookie and comm information when binding the socket. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-09-19Bluetooth: Check SOL_HCI for raw socket optionsMarcel Holtmann
The SOL_HCI level should be enforced when using socket options on the HCI raw socket interface. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-08-25Bluetooth: Fix hci_sock_recvmsg when MSG_TRUNC is not setLuiz Augusto von Dentz
Similar to bt_sock_recvmsg MSG_TRUNC shall be checked using the original flags not msg_flags. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-07-09Bluetooth: Rename HCI_BREDR into HCI_PRIMARYMarcel Holtmann
The HCI_BREDR naming is confusing since it actually stands for Primary Bluetooth Controller. Which is a term that has been used in the latest standard. However from a legacy point of view there only really have been Basic Rate (BR) and Enhanced Data Rate (EDR). Recent versions of Bluetooth introduced Low Energy (LE) and made this terminology a little bit confused since Dual Mode Controllers include BR/EDR and LE. To simplify this the name HCI_PRIMARY stands for the Primary Controller which can be a single mode or dual mode controller. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-07-08Bluetooth: Fix hci_sock_recvmsg return valueDenis Kenzior
If recvmsg is called with a destination buffer that is too small to receive the contents of skb in its entirety, the return value from recvmsg was inconsistent with common SOCK_SEQPACKET or SOCK_DGRAM semantics. If destination buffer provided by userspace is too small (e.g. len < copied), then MSG_TRUNC flag is set and copied is returned. Instead, it should return the length of the message, which is consistent with how other datagram based sockets act. Quoting 'man recv': "All three calls return the length of the message on successful compleā€ tion. If a message is too long to fit in the supplied buffer, excess bytes may be discarded depending on the type of socket the message is received from." and "MSG_TRUNC (since Linux 2.2) For raw (AF_PACKET), Internet datagram (since Linux 2.4.27/2.6.8), netlink (since Linux 2.6.22), and UNIX datagram (since Linux 3.4) sockets: return the real length of the packet or datagram, even when it was longer than the passed buffer." Signed-off-by: Denis Kenzior <denkenz@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-01-06Bluetooth: avoid rebuilding hci_sock all the timeJohannes Berg
Instead, allow using string formatting with send_monitor_note() and access init_utsname(). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-11-19Bluetooth: Add support for controller specific loggingMarcel Holtmann
To enable controller specific logging, the userspace daemon has to have the ability to log per controller. To facilitate this support, provide a dedicated logging channel. Messages in this channel will be included in the monitor queue and with that also forwarded to monitoring tools along with the actual hardware traces. All messages from the logging channel are timestamped and with that allow an easy correlation between userspace messages and hardware events. This will increase the ability to debug problems faster. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-11-19Bluetooth: Add support for sending system notes to monitor channelMarcel Holtmann
The monitor channel can be used to send generic system notes as text strings for debugging purposes. This adds the system note monitor code and uses it for including kernel and subsystem version into traces. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-11-19Bluetooth: Fix casting coding style within HCI socketsMarcel Holtmann
The HCI sockets code has still some old casting coding style. Fix this to match with the rest of the code. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-11-19Bluetooth: Add missing hci_skb_opcode for raw socket commandsMarcel Holtmann
When HCI commands are injected via the raw socket, the core was not including the decoded opcode value. So ensure that it is actually set. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-11-19Bluetooth: Compress the size of struct hci_ctrlJohan Hedberg
We can reduce the size of the hci_ctrl struct by converting 'bool req_start' to 'u8 req_flags' and making the two function pointers a union (since only one is ever set at a time). Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-11-19Bluetooth: Use new hci_skb_pkt_* wrappers for core packet handlingMarcel Holtmann
The new hci_skb_pkt_* wrappers only help if they are used consistently in the Bluetooth subsystem. So first convert the core packet handling. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-10-26Bluetooth: Rename bt_cb()->req into bt_cb()->hciMarcel Holtmann
The SKB context buffer for HCI request is really not just for requests, information in their are preserved for the whole HCI layer. So it makes more sense to actually rename it into bt_cb()->hci and also call it then struct hci_ctrl. In addition that allows moving the decoded opcode for outgoing packets into that struct. So far it was just consuming valuable space from the main shared items. And opcode are not valid for L2CAP packets. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-10-26Bluetooth: Remove unneeded parenthesis around MSG_OOBMarcel Holtmann
There are two checks that are still using (MSG_OOB) instead of just MSG_OOB and so lets just fix them. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-10-20Bluetooth: Add support setup stage internal notification eventMarcel Holtmann
Before the vendor specific setup stage is triggered call back into the core to trigger an internal notification event. That event is used to send an index update to the monitor interface. With that specific event it is possible to update userspace with manufacturer information before any HCI command has been executed. This is useful for early stage debugging of vendor specific initialization sequences. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-10-20Bluetooth: Restrict valid packet types via HCI_CHANNEL_RAWMarcel Holtmann
When using the HCI_CHANNEL_RAW, restrict the packet types to valid ones from the Bluetooth specification. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-10-20Bluetooth: Remove quirk for HCI_VENDOR_PKT filter handlingMarcel Holtmann
The HCI_VENDOR_PKT quirk was needed for BPA-100/105 devices that send these messages. Now that there is support for proper diagnostic channel this quirk is no longer needed. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-10-08Bluetooth: Add support for vendor specific diagnostic channelMarcel Holtmann
Introduce hci_recv_diag function for HCI drivers to allow sending vendor specific diagnostic messages into the Bluetooth core stack. The messages are not processed, but they are forwarded to the monitor channel and can be retrieved by user space diagnostic tools. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-10-08Bluetooth: Send index information updates to monitor channelMarcel Holtmann
The Bluetooth public device address might change during controller setup and it makes it a lot simpler for monitoring tools if they just get told what the new address is. In addition include the manufacturer / company information of the controller. That allows for easy vendor specific HCI command and event handling. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-10-05Bluetooth: Send transport open and close monitor eventsMarcel Holtmann
When the core starts or shuts down the actual HCI transport, send a new monitor event that indicates that this is happening. These new events correspond to HCI_DEV_OPEN and HCI_DEV_CLOSE events. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-10-05Bluetooth: Limit userspace exposure of stack internal eventsMarcel Holtmann
The stack internal events that are exposed to userspace should be limited to HCI_DEV_REG, HCI_DEV_UNREG, HCI_DEV_UP and HCI_DEV_DOWN. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-09-17Bluetooth: close HCI device when user channel socket gets closedSimon Fels
With 9380f9eacfbbee701daa416edd6625efcd3e29e1 the order of unsetting the HCI_USER_CHANNEL flag of the HCI device was reverted to ensure the device is first closed before making it available again. Due to hci_dev_close checking for HCI_USER_CHANNEL being set on the device it was never really closed and was kept opened. We're now calling hci_dev_do_close directly to make sure the device is correctly closed and we keep the correct order to unset the flag on our device object. Signed-off-by: Simon Fels <simon.fels@canonical.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-08Bluetooth: Fix race condition with user channel and setup stageMarcel Holtmann
During the initial setup stage of a controller, the low-level transport is actually active. This means that HCI_UP is true. To avoid toggling the transport off and back on again for normal operation the kernel holds a grace period with HCI_AUTO_OFF that will turn the low-level transport off in case no user is present. The idea of the grace period is important to avoid having to initialize all of the controller twice. So legacy ioctl and the new management interface knows how to clear this grace period and then start normal operation. For the user channel operation this grace period has not been taken into account which results in the problem that HCI_UP and HCI_AUTO_OFF are set and the kernel will return EBUSY. However from a system point of view the controller is ready to be grabbed by either the ioctl, the management interface or the user channel. This patch brings the user channel to the same level as the other two entries for operating a controller. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Cc: stable@vger.kernel.org
2015-06-06Bluetooth: Reorder HCI user channel socket releaseLoic Poulain
The hci close method needs to know if we are in user channel context. Only add the index to mgmt once close is performed. Signed-off-by: Loic Poulain <loic.poulain@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-05-11net: Pass kern from net_proto_family.create to sk_allocEric W. Biederman
In preparation for changing how struct net is refcounted on kernel sockets pass the knowledge that we are creating a kernel socket from sock_create_kern through to sk_alloc. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-30Bluetooth: Refactor HCI request variables into own structJohan Hedberg
In order to shrink the size of bt_skb_cb, this patch moves the HCI request related variables into their own req_ctrl struct. Additionall the L2CAP and HCI request structs are placed inside the same union since they will never be used at the same time for the same skb. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-03-17Bluetooth: Move generic mgmt command dispatcher to hci_sock.cJohan Hedberg
The mgmt.c file should be reserved purely for HCI_CHANNEL_CONTROL. The mgmt_control() function in it is already completely generic and has a single user in hci_sock.c. This patch moves the function there and renames it a bit more appropriately to hci_mgmt_cmd() (as it's a command dispatcher). Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-03-17Bluetooth: Add helper to get HCI channel of a socketJohan Hedberg
We'll need to have access to which HCI channel a socket is bound to, in order to manage pending mgmt commands in clean way. This patch adds a helper for the purpose. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-03-15Bluetooth: Send global configuration updates to all management usersMarcel Holtmann
Changes to the global configuration updates like settings, class of device, name etc. can be received by every user. They are allowed to read them in the first place so provide the updates via events as well. Otherwise untrusted users start polling for updates and that is not a desired behavior. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-03-15Bluetooth: Open management interface for untrusted usersMarcel Holtmann
Until now the management interface was restricted to CAP_NET_ADMIN. With this change every user can open the management socket. However the list of commands is heavily restricted to getting basic information about the attached controllers. No access for configuration or other operation is provided. The events are also limited. This is done so that no keys can leak or untrusted users can mess with the Bluetooth configuration. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-03-15Bluetooth: Add hci_sock_test_flag helper functionMarcel Holtmann
The management interface will need access to the socket flags and so provide a helper function for checking them. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-03-15Bluetooth: Consolidate socket channel sending function back into oneMarcel Holtmann
With the introduction of trusted socket flag for control and monitor channels, it is now possible to use a single function for sending packets to these sockets. And with that consolidate the handling. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-03-15Bluetooth: Introduce trusted flag for management control socketsMarcel Holtmann
Providing a global trusted flag for management control sockets provides an easy way for identifying sockets and imposing restriction on it. For now all management sockets are trusted since they require CAP_NET_ADMIN. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-03-15Bluetooth: Use special function to send filter management index eventsMarcel Holtmann
For sending Index Added, Index Removed, Unconfigured Index Added and Unconfigured Index Removed managment events the new helper functions allows taking into account if these events are enabled for a certain management socket or not. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-03-15Bluetooth: Provide hci_send_to_flagged_channel helper functionMarcel Holtmann
The hci_send_to_flagged_channel helper function can be used to send packets to all channels that have a certain HCI socket flag set. This is especially useful for managment events that are limited to sockets that have first enabled certain functionality. This allows for filtering of events without confusing existing users. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-03-15Bluetooth: Add flags field and setting function for HCI socketsMarcel Holtmann
To filter out certain actions for certain HCI sockets introcuce a flags field that allows to configure specific settings on individual sockets. Since the hci_pinfo structure is private in hci_sock.c, provide helper functions for setting and clearing a given flag. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-03-13Bluetooth: Introduce hci_dev_test_and_set_flag helper macroMarcel Holtmann
Instead of manually coding test_and_set_bit on hdev->dev_flags all the time, use hci_dev_test_and_set_flag helper macro. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-03-13Bluetooth: Introduce hci_dev_clear_flag helper macroMarcel Holtmann
Instead of manually coding clear_bit on hdev->dev_flags all the time, use hci_dev_clear_flag helper macro. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>