summaryrefslogtreecommitdiff
path: root/net/ipv6
AgeCommit message (Collapse)Author
2016-05-20udp: prevent skbs lingering in tunnel socket queuesHannes Frederic Sowa
In case we find a socket with encapsulation enabled we should call the encap_recv function even if just a udp header without payload is available. The callbacks are responsible for correctly verifying and dropping the packets. Also, in case the header validation fails for geneve and vxlan we shouldn't put the skb back into the socket queue, no one will pick them up there. Instead we can simply discard them in the respective encap_recv functions. Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-20ip6_gre: Do not allow segmentation offloads GRE_CSUM is enabled with FOU/GUEAlexander Duyck
This patch addresses the same issue we had for IPv4 where enabling GRE with an inner checksum cannot be supported with FOU/GUE due to the fact that they will jump past the GRE header at it is treated like a tunnel header. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-20ipv6: Don't reset inner headers in ip6_tnl_xmitTom Herbert
Since iptunnel_handle_offloads() is called in all paths we can probably drop the block in ip6_tnl_xmit that was checking for skb->encapsulation and resetting the inner headers. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-20ip4ip6: Support for GSO/GROTom Herbert
Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-20ip6ip6: Support for GSO/GROTom Herbert
Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-20ipv6: Set features for IPv6 tunnelsTom Herbert
Need to set dev features, use same values that are used in GREv6. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-20ip6_tunnel: Add support for fou/gue encapsulationTom Herbert
Add netlink and setup for encapsulation Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-20ip6_gre: Add support for fou/gue encapsulationTom Herbert
Add netlink and setup for encapsulation Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-20fou: Add encap ops for IPv6 tunnelsTom Herbert
This patch add a new fou6 module that provides encapsulation operations for IPv6. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-20ip6_tun: Add infrastructure for doing encapsulationTom Herbert
Add encap_hlen and ip_tunnel_encap structure to ip6_tnl. Add functions for getting encap hlen, setting up encap on a tunnel, performing encapsulation operation. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-20ipv6: Change "final" protocol processing for encapsulationTom Herbert
When performing foo-over-UDP, UDP packets are processed by the encapsulation handler which returns another protocol to process. This may result in processing two (or more) protocols in the loop that are marked as INET6_PROTO_FINAL. The actions taken for hitting a final protocol, in particular the skb_postpull_rcsum can only be performed once. This patch set adds a check of a final protocol has been seen. The rules are: - If the final protocol has not been seen any protocol is processed (final and non-final). In the case of a final protocol, the final actions are taken (like the skb_postpull_rcsum) - If a final protocol has been seen (e.g. an encapsulating UDP header) then no further non-final protocols are allowed (e.g. extension headers). For more final protocols the final actions are not taken (e.g. skb_postpull_rcsum). Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-20ipv6: Fix nexthdr for reinjectionTom Herbert
In ip6_input_finish the nexthdr protocol is retrieved from the next header offset that is returned in the cb of the skb. This method does not work for UDP encapsulation that may not even have a concept of a nexthdr field (e.g. FOU). This patch checks for a final protocol (INET6_PROTO_FINAL) when a protocol handler returns > 0. If the protocol is not final then resubmission is performed on nhoff value. If the protocol is final then the nexthdr is taken to be the return value. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-20net: define gso types for IPx over IPv4 and IPv6Tom Herbert
This patch defines two new GSO definitions SKB_GSO_IPXIP4 and SKB_GSO_IPXIP6 along with corresponding NETIF_F_GSO_IPXIP4 and NETIF_F_GSO_IPXIP6. These are used to described IP in IP tunnel and what the outer protocol is. The inner protocol can be deduced from other GSO types (e.g. SKB_GSO_TCPV4 and SKB_GSO_TCPV6). The GSO types of SKB_GSO_IPIP and SKB_GSO_SIT are removed (these are both instances of SKB_GSO_IPXIP4). SKB_GSO_IPXIP6 will be used when support for GSO with IP encapsulation over IPv6 is added. Signed-off-by: Tom Herbert <tom@herbertland.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-20gso: Remove arbitrary checks for unsupported GSOTom Herbert
In several gso_segment functions there are checks of gso_type against a seemingly arbitrary list of SKB_GSO_* flags. This seems like an attempt to identify unsupported GSO types, but since the stack is the one that set these GSO types in the first place this seems unnecessary to do. If a combination isn't valid in the first place that stack should not allow setting it. This is a code simplication especially for add new GSO types. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-16tcp: minor optimizations around tcp_hdr() usageEric Dumazet
tcp_hdr() is slightly more expensive than using skb->data in contexts where we know they point to the same byte. In receive path, tcp_v4_rcv() and tcp_v6_rcv() are in this situation, as tcp header has not been pulled yet. In output path, the same can be said when we just pushed the tcp header in the skb, in tcp_transmit_skb() and tcp_make_synack() Also factorize the two checks for tcb->tcp_flags & TCPHDR_SYN in tcp_transmit_skb() and pass tcp header pointer to tcp_ecn_send(), so that compiler can further optimize and avoid a reload. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-16sock: propagate __sock_cmsg_send() errorEric Dumazet
__sock_cmsg_send() might return different error codes, not only -EINVAL. Fixes: 24025c465f77 ("ipv4: process socket-level control messages in IPv4") Fixes: ad1e46a83716 ("ipv6: process socket-level control messages in IPv6") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
The nf_conntrack_core.c fix in 'net' is not relevant in 'net-next' because we no longer have a per-netns conntrack hash. The ip_gre.c conflict as well as the iwlwifi ones were cases of overlapping changes. Conflicts: drivers/net/wireless/intel/iwlwifi/mvm/tx.c net/ipv4/ip_gre.c net/netfilter/nf_conntrack_core.c Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-14net/route: enforce hoplimit max valuePaolo Abeni
Currently, when creating or updating a route, no check is performed in both ipv4 and ipv6 code to the hoplimit value. The caller can i.e. set hoplimit to 256, and when such route will be used, packets will be sent with hoplimit/ttl equal to 0. This commit adds checks for the RTAX_HOPLIMIT value, in both ipv4 ipv6 route code, substituting any value greater than 255 with 255. This is consistent with what is currently done for ADVMSS and MTU in the ipv4 code. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-13udp: Resolve NULL pointer dereference over flow-based vxlan deviceAlexander Duyck
While testing an OpenStack configuration using VXLANs I saw the following call trace: RIP: 0010:[<ffffffff815fad49>] udp4_lib_lookup_skb+0x49/0x80 RSP: 0018:ffff88103867bc50 EFLAGS: 00010286 RAX: ffff88103269bf00 RBX: ffff88103269bf00 RCX: 00000000ffffffff RDX: 0000000000004300 RSI: 0000000000000000 RDI: ffff880f2932e780 RBP: ffff88103867bc60 R08: 0000000000000000 R09: 000000009001a8c0 R10: 0000000000004400 R11: ffffffff81333a58 R12: ffff880f2932e794 R13: 0000000000000014 R14: 0000000000000014 R15: ffffe8efbfd89ca0 FS: 0000000000000000(0000) GS:ffff88103fd80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000488 CR3: 0000000001c06000 CR4: 00000000001426e0 Stack: ffffffff81576515 ffffffff815733c0 ffff88103867bc98 ffffffff815fcc17 ffff88103269bf00 ffffe8efbfd89ca0 0000000000000014 0000000000000080 ffffe8efbfd89ca0 ffff88103867bcc8 ffffffff815fcf8b ffff880f2932e794 Call Trace: [<ffffffff81576515>] ? skb_checksum+0x35/0x50 [<ffffffff815733c0>] ? skb_push+0x40/0x40 [<ffffffff815fcc17>] udp_gro_receive+0x57/0x130 [<ffffffff815fcf8b>] udp4_gro_receive+0x10b/0x2c0 [<ffffffff81605863>] inet_gro_receive+0x1d3/0x270 [<ffffffff81589e59>] dev_gro_receive+0x269/0x3b0 [<ffffffff8158a1b8>] napi_gro_receive+0x38/0x120 [<ffffffffa0871297>] gro_cell_poll+0x57/0x80 [vxlan] [<ffffffff815899d0>] net_rx_action+0x160/0x380 [<ffffffff816965c7>] __do_softirq+0xd7/0x2c5 [<ffffffff8107d969>] run_ksoftirqd+0x29/0x50 [<ffffffff8109a50f>] smpboot_thread_fn+0x10f/0x160 [<ffffffff8109a400>] ? sort_range+0x30/0x30 [<ffffffff81096da8>] kthread+0xd8/0xf0 [<ffffffff81693c82>] ret_from_fork+0x22/0x40 [<ffffffff81096cd0>] ? kthread_park+0x60/0x60 The following trace is seen when receiving a DHCP request over a flow-based VXLAN tunnel. I believe this is caused by the metadata dst having a NULL dev value and as a result dev_net(dev) is causing a NULL pointer dereference. To resolve this I am replacing the check for skb_dst(skb)->dev with just skb->dev. This makes sense as the callers of this function are usually in the receive path and as such skb->dev should always be populated. In addition other functions in the area where these are called are already using dev_net(skb->dev) to determine the namespace the UDP packet belongs in. Fixes: 63058308cd55 ("udp: Add udp6_lib_lookup_skb and udp4_lib_lookup_skb") Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-12gre: Fix wrong tpi->proto in WCCPHaishuang Yan
When dealing with WCCP in gre6 tunnel, it sets the wrong tpi->protocol, that is, ETH_P_IP instead of ETH_P_IPV6 for the encapuslated traffic. Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-12ip6_gre: Fix get_size calculation for gre6 tunnelHaishuang Yan
Do not include attribute IFLA_GRE_TOS. Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-11net: l3mdev: Add hook in ip and ipv6David Ahern
Currently the VRF driver uses the rx_handler to switch the skb device to the VRF device. Switching the dev prior to the ip / ipv6 layer means the VRF driver has to duplicate IP/IPv6 processing which adds overhead and makes features such as retaining the ingress device index more complicated than necessary. This patch moves the hook to the L3 layer just after the first NF_HOOK for PRE_ROUTING. This location makes exposing the original ingress device trivial (next patch) and allows adding other NF_HOOKs to the VRF driver in the future. dev_queue_xmit_nit is exported so that the VRF driver can cycle the skb with the switched device through the packet taps to maintain current behavior (tcpdump can be used on either the vrf device or the enslaved devices). Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-11ipv6: fix 4in6 tunnel receive pathNicolas Dichtel
Protocol for 4in6 tunnel is IPPROTO_IPIP. This was wrongly changed by the last cleanup. CC: Tom Herbert <tom@herbertland.com> Fixes: 0d3c703a9d17 ("ipv6: Cleanup IPv6 tunnel receive path") Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-10ila: ipv6/ila: fix nlsize calculation for lwtunnelTom Herbert
The handler 'ila_fill_encap_info' adds two attributes: ILA_ATTR_LOCATOR and ILA_ATTR_CSUM_MODE. nla_total_size_64bit() must be use for ILA_ATTR_LOCATOR. Also, do nla_put_u8 instead of nla_put_u64 for ILA_ATTR_CSUM_MODE. Fixes: f13a82d87b21 ("ipv6: use nla_put_u64_64bit()") Fixes: 90bfe662db13 ("ila: add checksum neutral ILA translations") Reported-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-10ip6_gre: Use correct flags for reading TUNNEL_SEQTom Herbert
Fix two spots where o_flags in a tunnel are being compared to GRE_SEQ instead of TUNNEL_SEQ. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-10ip6: Don't set transport header in IPv6 tunnelingTom Herbert
We only need to reset network header here. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-10ip6_gre: Set inner protocol correctly in __gre6_xmitTom Herbert
Need to use adjusted protocol value for setting inner protocol. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-10gre6: Fix flag translationsTom Herbert
GRE for IPv6 does not properly translate for GRE flags to tunnel flags and vice versa. This patch fixes that. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-10ip6_gre: Fix MTU settingTom Herbert
In ip6gre_tnl_link_config set t->tun_len and t->hlen correctly for the configuration. For hard_header_len and mtu calculation include IPv6 header and encapsulation overhead. In ip6gre_tunnel_init_common set t->tun_len and t->hlen correctly for the configuration. Revert to setting hard_header_len instead of needed_headroom. Tested: ./ip link add name tun8 type ip6gretap remote \ 2401:db00:20:911a:face:0:27:0 local \ 2401:db00:20:911a:face:0:25:0 ttl 225 Gives MTU of 1434. That is equal to 1500 - 40 - 14 - 4 - 8. ./ip link add name tun8 type ip6gretap remote \ 2401:db00:20:911a:face:0:27:0 local \ 2401:db00:20:911a:face:0:25:0 ttl 225 okey 123 Gives MTU of 1430. That is equal to 1500 - 40 - 14 - 4 - 8 - 4. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-10net: l3mdev: Move get_saddr and rt6_dstDavid Ahern
Move l3mdev_rt6_dst_by_oif and l3mdev_get_saddr to l3mdev.c. Collapse l3mdev_get_rt6_dst into l3mdev_rt6_dst_by_oif since it is the only user and keep the l3mdev_get_rt6_dst name for consistency with other hooks. A follow-on patch adds more code to these functions making them long for inlined functions. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
In netdevice.h we removed the structure in net-next that is being changes in 'net'. In macsec.c and rtnetlink.c we have overlaps between fixes in 'net' and the u64 attribute changes in 'net-next'. The mlx5 conflicts have to do with vxlan support dependencies. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller
Pablo Neira Ayuso says: ==================== Netfilter updates for net-next The following large patchset contains Netfilter updates for your net-next tree. My initial intention was to send you this in two goes but when I looked back twice I already had this burden on top of me. Several updates for IPVS from Marco Angaroni: 1) Allow SIP connections originating from real-servers to be load balanced by the SIP persistence engine as is already implemented in the other direction. 2) Release connections immediately for One-packet-scheduling (OPS) in IPVS, instead of making it via timer and rcu callback. 3) Skip deleting conntracks for each one packet in OPS, and don't call nf_conntrack_alter_reply() since no reply is expected. 4) Enable drop on exhaustion for OPS + SIP persistence. Miscelaneous conntrack updates from Florian Westphal, including fix for hash resize: 5) Move conntrack generation counter out of conntrack pernet structure since this is only used by the init_ns to allow hash resizing. 6) Use get_random_once() from packet path to collect hash random seed instead of our compound. 7) Don't disable BH from ____nf_conntrack_find() for statistics, use NF_CT_STAT_INC_ATOMIC() instead. 8) Fix lookup race during conntrack hash resizing. 9) Introduce clash resolution on conntrack insertion for connectionless protocol. Then, Florian's netns rework to get rid of per-netns conntrack table, thus we use one single table for them all. There was consensus on this change during the NFWS 2015 and, on top of that, it has recently been pointed as a source of multiple problems from unpriviledged netns: 11) Use a single conntrack hashtable for all namespaces. Include netns in object comparisons and make it part of the hash calculation. Adapt early_drop() to consider netns. 12) Use single expectation and NAT hashtable for all namespaces. 13) Use a single slab cache for all namespaces for conntrack objects. 14) Skip full table scanning from nf_ct_iterate_cleanup() if the pernet conntrack counter tells us the table is empty (ie. equals zero). Fixes for nf_tables interval set element handling, support to set conntrack connlabels and allow set names up to 32 bytes. 15) Parse element flags from element deletion path and pass it up to the backend set implementation. 16) Allow adjacent intervals in the rbtree set type for dynamic interval updates. 17) Add support to set connlabel from nf_tables, from Florian Westphal. 18) Allow set names up to 32 bytes in nf_tables. Several x_tables fixes and updates: 19) Fix incorrect use of IS_ERR_VALUE() in x_tables, original patch from Andrzej Hajda. And finally, miscelaneous netfilter updates such as: 20) Disable automatic helper assignment by default. Note this proc knob was introduced by a9006892643a ("netfilter: nf_ct_helper: allow to disable automatic helper assignment") 4 years ago to start moving towards explicit conntrack helper configuration via iptables CT target. 21) Get rid of obsolete and inconsistent debugging instrumentation in x_tables. 22) Remove unnecessary check for null after ip6_route_output(). ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-06net: vrf: Create FIB tables on link createDavid Ahern
Tables have to exist for VRFs to function. Ensure they exist when VRF device is created. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-06net: ipv6: tcp reset, icmp need to consider L3 domainDavid Ahern
Responses for packets to unused ports are getting lost with L3 domains. IPv4 has ip_send_unicast_reply for sending TCP responses which accounts for L3 domains; update the IPv6 counterpart tcp_v6_send_response. For icmp the L3 master check needs to be moved up in icmp6_send to properly respond to UDP packets to a port with no listener. Fixes: ca254490c8df ("net: Add VRF support to IPv6 stack") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-05netfilter: x_tables: get rid of old and inconsistent debuggingPablo Neira Ayuso
The dprintf() and duprintf() functions are enabled at compile time, these days we have better runtime debugging through pr_debug() and static keys. On top of this, this debugging is so old that I don't expect anyone using this anymore, so let's get rid of this. IP_NF_ASSERT() is still left in place, although this needs that NETFILTER_DEBUG is enabled, I think these assertions provide useful context information when reading the code. Note that ARP_NF_ASSERT() has been removed as there is no user of this. Kill also DEBUG_ALLOW_ALL and a couple of pr_error() and pr_debug() spots that are inconsistently placed in the code. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-05-04gre6: add Kconfig dependency for NET_IPGRE_DEMUXArnd Bergmann
The ipv6 gre implementation was cleaned up to share more code with the ipv4 version, but it can be enabled even when NET_IPGRE_DEMUX is disabled, resulting in a link error: net/built-in.o: In function `gre_rcv': :(.text+0x17f5d0): undefined reference to `gre_parse_header' ERROR: "gre_parse_header" [net/ipv6/ip6_gre.ko] undefined! This adds a Kconfig dependency to prevent that now invalid configuration. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 308edfdf1563 ("gre6: Cleanup GREv6 receive path, call common GRE functions") Acked-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-04gre: change gre_parse_header to return the header lengthJiri Benc
It's easier for gre_parse_header to return the header length instead of filing it into a parameter. That way, the callers that don't care about the header length can just check whether the returned value is lower than zero. In gre_err, the tunnel header must not be pulled. See commit b7f8fe251e46 ("gre: do not pull header in ICMP error processing") for details. This patch reduces the conflict between the mentioned commit and commit 95f5c64c3c13 ("gre: Move utility functions to common headers"). Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: net/ipv4/ip_gre.c Minor conflicts between tunnel bug fixes in net and ipv6 tunnel cleanups in net-next. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-03ipv6/ila: fix nlsize calculation for lwtunnelNicolas Dichtel
The handler 'ila_fill_encap_info' adds one attribute: ILA_ATTR_LOCATOR. Fixes: 65d7ab8de582 ("net: Identifier Locator Addressing module") CC: Tom Herbert <tom@herbertland.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-03ipv6: add new struct ipcm6_cookieWei Wang
In the sendmsg function of UDP, raw, ICMP and l2tp sockets, we use local variables like hlimits, tclass, opt and dontfrag and pass them to corresponding functions like ip6_make_skb, ip6_append_data and xxx_push_pending_frames. This is not a good practice and makes it hard to add new parameters. This fix introduces a new struct ipcm6_cookie similar to ipcm_cookie in ipv4 and include the above mentioned variables. And we only pass the pointer to this structure to corresponding functions. This makes it easier to add new parameters in the future and makes the function cleaner. Signed-off-by: Wei Wang <weiwan@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-02gre6: Cleanup GREv6 transmit path, call common GRE functionsTom Herbert
Changes in GREv6 transmit path: - Call gre_checksum, remove gre6_checksum - Rename ip6gre_xmit2 to __gre6_xmit - Call gre_build_header utility function - Call ip6_tnl_xmit common function - Call ip6_tnl_change_mtu, eliminate ip6gre_tunnel_change_mtu Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-02ipv6: Generic tunnel cleanupTom Herbert
A few generic changes to generalize tunnels in IPv6: - Export ip6_tnl_change_mtu so that it can be called by ip6_gre - Add tun_hlen to ip6_tnl structure. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-02ipv6: Create ip6_tnl_xmitTom Herbert
This patch renames ip6_tnl_xmit2 to ip6_tnl_xmit and exports it. Other users like GRE will be able to call this. The original ip6_tnl_xmit function is renamed to ip6_tnl_start_xmit (this is an ndo_start_xmit function). Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-02gre6: Cleanup GREv6 receive path, call common GRE functionsTom Herbert
- Create gre_rcv function. This calls gre_parse_header and ip6gre_rcv. - Call ip6_tnl_rcv. Doing this and using gre_parse_header eliminates most of the code in ip6gre_rcv. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-02ipv6: Cleanup IPv6 tunnel receive pathTom Herbert
Some basic changes to make IPv6 tunnel receive path look more like IPv4 path: - Make ip6_tnl_rcv non-static so that GREv6 and others can call it - Make ip6_tnl_rcv look like ip_tunnel_rcv - Switch to gro_cells_receive - Make ip6_tnl_rcv non-static and export it Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-02udp: prepare for non BH masking at backlog processingEric Dumazet
UDP uses the generic socket backlog code, and this will soon be changed to not disable BH when protocol is called back. We need to use appropriate SNMP accessors. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-02tcp: do not assume TCP code is non preemptibleEric Dumazet
We want to to make TCP stack preemptible, as draining prequeue and backlog queues can take lot of time. Many SNMP updates were assuming that BH (and preemption) was disabled. Need to convert some __NET_INC_STATS() calls to NET_INC_STATS() and some __TCP_INC_STATS() to TCP_INC_STATS() Before using this_cpu_ptr(net->ipv4.tcp_sk) in tcp_v4_send_reset() and tcp_v4_send_ack(), we add an explicit preempt disabled section. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-29netfilter: fix IS_ERR_VALUE usagePablo Neira Ayuso
This is a forward-port of the original patch from Andrzej Hajda, he said: "IS_ERR_VALUE should be used only with unsigned long type. Otherwise it can work incorrectly. To achieve this function xt_percpu_counter_alloc is modified to return unsigned long, and its result is assigned to temporary variable to perform error checking, before assigning to .pcnt field. The patch follows conclusion from discussion on LKML [1][2]. [1]: http://permalink.gmane.org/gmane.linux.kernel/2120927 [2]: http://permalink.gmane.org/gmane.linux.kernel/2150581" Original patch from Andrzej is here: http://patchwork.ozlabs.org/patch/582970/ This patch has clashed with input validation fixes for x_tables. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-04-28ipv6: kill ICMP6MSGIN_INC_STATS_BH()Eric Dumazet
IPv6 ICMP stats are atomics anyway. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-28ipv6: rename IP6_UPD_PO_STATS_BH()Eric Dumazet
Rename IP6_UPD_PO_STATS_BH() to __IP6_UPD_PO_STATS() Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v0.10.2 at 2024-11-09 16:45:09 (GMT)