summaryrefslogtreecommitdiff
path: root/net/mac80211/ht.c
AgeCommit message (Collapse)Author
2016-02-24mac80211: limit the A-MSDU Tx based on peer's capabilitiesEmmanuel Grumbach
In VHT, the specification allows to limit the number of MSDUs in an A-MSDU in the Extended Capabilities IE. There is also a limitation on the byte size in the VHT IE. In HT, the only limitation is on the byte size. Parse the capabilities from the peer and make them available to the driver. In HT, there is another limitation when a BA agreement is active: the byte size can't be greater than 4095. This is not enforced here. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-30mac80211: add VHT support for IBSSJanusz.Dziedzic@tieto.com
Add VHT support for IBSS. Drivers could activate this feature by setting NL80211_EXT_FEATURE_VHT_IBSS flag. Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-07-21mac80211: set Rx highest rate in ht_capArik Nemtsov
Set for completeness mostly, currently unused in the code. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-07-21mac80211: support HT for TDLS stationsArik Nemtsov
Add the HT capabilities and HT operation information elements to TDLS setup packets where appropriate. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-22mac80211: Allow HT capa override to add 40 MHz intolerantJouni Malinen
This can be useful for testing purposes to confirm valid AP behavior on HT 20/40 co-existence functionality. Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-09mac80211: Allow disabling LDPCPawel Kulakowski
This allows user-space (wpa_supplicant) to disable LDPC coding. Signed-off-by: Pawel Kulakowski <pawel.kulakowski@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-21mac80211: allow drivers to request SMPS offLuciano Coelho
Previously we were warning and using automatic when a driver sent an update request with SMPS off. This patch makes it possible for drivers to disable SMPS at runtime, for whatever reason. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-13Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
2014-02-06mac80211: avoid deadlock revealed by lockdepEmmanuel Grumbach
sdata->u.ap.request_smps_work can’t be flushed synchronously under wdev_lock(wdev) since ieee80211_request_smps_ap_work itself locks the same lock. While at it, reset the driver_smps_mode when the ap is stopped to its default: OFF. This solves: ====================================================== [ INFO: possible circular locking dependency detected ] 3.12.0-ipeer+ #2 Tainted: G O ------------------------------------------------------- rmmod/2867 is trying to acquire lock: ((&sdata->u.ap.request_smps_work)){+.+...}, at: [<c105b8d0>] flush_work+0x0/0x90 but task is already holding lock: (&wdev->mtx){+.+.+.}, at: [<f9b32626>] cfg80211_stop_ap+0x26/0x230 [cfg80211] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&wdev->mtx){+.+.+.}: [<c10aefa9>] lock_acquire+0x79/0xe0 [<c1607a1a>] mutex_lock_nested+0x4a/0x360 [<fb06288b>] ieee80211_request_smps_ap_work+0x2b/0x50 [mac80211] [<c105cdd8>] process_one_work+0x198/0x450 [<c105d469>] worker_thread+0xf9/0x320 [<c10669ff>] kthread+0x9f/0xb0 [<c1613397>] ret_from_kernel_thread+0x1b/0x28 -> #0 ((&sdata->u.ap.request_smps_work)){+.+...}: [<c10ae9df>] __lock_acquire+0x183f/0x1910 [<c10aefa9>] lock_acquire+0x79/0xe0 [<c105b917>] flush_work+0x47/0x90 [<c105d867>] __cancel_work_timer+0x67/0xe0 [<c105d90f>] cancel_work_sync+0xf/0x20 [<fb0765cc>] ieee80211_stop_ap+0x8c/0x340 [mac80211] [<f9b3268c>] cfg80211_stop_ap+0x8c/0x230 [cfg80211] [<f9b0d8f9>] cfg80211_leave+0x79/0x100 [cfg80211] [<f9b0da72>] cfg80211_netdev_notifier_call+0xf2/0x4f0 [cfg80211] [<c160f2c9>] notifier_call_chain+0x59/0x130 [<c106c6de>] __raw_notifier_call_chain+0x1e/0x30 [<c106c70f>] raw_notifier_call_chain+0x1f/0x30 [<c14f8213>] call_netdevice_notifiers_info+0x33/0x70 [<c14f8263>] call_netdevice_notifiers+0x13/0x20 [<c14f82a4>] __dev_close_many+0x34/0xb0 [<c14f83fe>] dev_close_many+0x6e/0xc0 [<c14f9c77>] rollback_registered_many+0xa7/0x1f0 [<c14f9dd4>] unregister_netdevice_many+0x14/0x60 [<fb06f4d9>] ieee80211_remove_interfaces+0xe9/0x170 [mac80211] [<fb055116>] ieee80211_unregister_hw+0x56/0x110 [mac80211] [<fa3e9396>] iwl_op_mode_mvm_stop+0x26/0xe0 [iwlmvm] [<f9b9d8ca>] _iwl_op_mode_stop+0x3a/0x70 [iwlwifi] [<f9b9d96f>] iwl_opmode_deregister+0x6f/0x90 [iwlwifi] [<fa405179>] __exit_compat+0xd/0x19 [iwlmvm] [<c10b8bf9>] SyS_delete_module+0x179/0x2b0 [<c1613421>] sysenter_do_call+0x12/0x32 Fixes: 687da132234f ("mac80211: implement SMPS for AP") Cc: <stable@vger.kernel.org> [3.13] Reported-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-04mac80211: send {ADD,DEL}BA on AC_VO like other mgmt frames, as per specKarl Beldan
ATM, {ADD,DEL}BA and BAR frames are sent on the AC matching the TID of the BA parameters. In the discussion [1] about this patch, Johannes recalled that it fixed some races with the DELBA and indeed this behavior was introduced in [2]. While [2] is right for the BARs, the part queueing the {ADD,DEL}BAs on their BA params TID AC violates the spec and is more a workaround for some drivers. Helmut expressed some concerns wrt such drivers, in particular DELBAs in rt2x00. ATM, DELBAs are sent after a driver has called (hence "purposely") ieee80211_start_tx_ba_cb_irqsafe and Johannes and Emmanuel gave some details wrt intentions behind the split of the IEEE80211_AMPDU_TX_STOP_* given to the driver ampdu_action supposed to call this function, which could prove handy to people trying to do the right thing in faulty drivers (if their fw/hw don't get in their way). [1] http://mid.gmane.org/1390391564-18481-1-git-send-email-karl.beldan@gmail.com [2] Commit: cf6bb79ad828 ("mac80211: Use appropriate TID for sending BAR, ADDBA and DELBA frames") Signed-off-by: Karl Beldan <karl.beldan@rivierawaves.com> Cc: Helmut Schaa <helmut.schaa@googlemail.com> Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-01-07mac80211: allow to set smps mode to OFF in AP modeEmmanuel Grumbach
In managed mode, we should not ask for OFF mode because the power settings may still require DYNAMIC. In AP mode, this should be allowed since the default settings is OFF and AUTOMATIC is not allowed. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-28mac80211: implement SMPS for APEmmanuel Grumbach
When the driver requests to move to STATIC or DYNAMIC SMPS, we send an action frame to each associated station and reconfigure the channel context / driver. Of course, non-MIMO stations are ignored. The beacon isn't updated. The association response will include the original capabilities. Stations that associate while in non-OFF SMPS mode will get an action frame right after association to inform them about our current state. Note that we wait until the end of the EAPOL. Sending an action frame before the EAPOL is finished can be an issue for a few clients. Clients aren't likely to send EAPOL frames in MIMO anyway. When the SMPS configuration gets more permissive (e.g. STATIC -> OFF), we don't wake up stations that are asleep We remember that they don't know about the change and send the action frame when they wake up. When the SMPS configuration gets more restrictive (e.g. OFF -> STATIC), we set the TIM bit for every sleeping STA. uAPSD stations might send MIMO until they poll the action frame, but this is for a short period of time. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [fix vht streams loop, initialisation] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-07-16mac80211: enable HT overrides for ibssSimon Wunderlich
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2013-06-13mac80211: Ensure tid_start_tx is protected by sta->lockBen Greear
All accesses of the tid_start_tx lock should be protected by sta->lock if there is any chance that another thread could still be accessing the sta object. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-05-24cfg80211/mac80211: use cfg80211 wdev mutex in mac80211Johannes Berg
Using separate locks in cfg80211 and mac80211 has always caused issues, for example having to unlock in places in mac80211 to call cfg80211, which even needed a framework to make cfg80211 calls after some functions returned etc. Additionally, I suspect some issues people have reported with the cfg80211 state getting confused could be due to such issues, when cfg80211 is asking mac80211 to change state but mac80211 is in the process of telling cfg80211 that the state changed (in another way.) Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-06mac80211: fix HT capability overrides for AP stationJohannes Berg
HT capabilites are asymmetric -- e.g. beamforming is both an RX and TX capability. If, for example, we support RX but not TX, the RX capability of the AP station is masked out (if it supports it). This works correctly if it's really the driver capability. If, on the other hand, the reason for not supporting TX BF is that it was removed by HT capability overrides then the wrong thing happens: the AP's TX capability will be removed rather than its RX capability, because the override function works on own capabilities, not remote ones, and doesn't take the asymmetry into account. To fix this make a copy of our own capabilities, apply the overrides to them (where needed) and then use that to set up the peer's capabilities. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-06mac80211: don't apply HT overrides to TDLS peersJohannes Berg
The HT overrides are intended only for the connection to the AP, not for any other purpose. Therefore, don't apply them to TDLS peers that are also stations added to a managed station interface. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15mac80211: stop modifying HT SMPS capabilityJohannes Berg
Instead of modifying the HT SMPS capability field for stations, track the SMPS mode explicitly in a new field in the station struct and use it in the drivers that care about it. This simplifies the code using it. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15mac80211: constify IE parsingJohannes Berg
Make all the parsed IE pointers const, and propagate the change to all the users etc. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15mac80211: handle VHT operating mode notificationJohannes Berg
Handle the operating mode notification action frame. When the supported streams or the bandwidth change let the driver and rate control algorithm know. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15mac80211: stop toggling IEEE80211_HT_CAP_SUP_WIDTH_20_40Johannes Berg
For VHT, many more bandwidth changes are possible. As a first step, stop toggling the IEEE80211_HT_CAP_SUP_WIDTH_20_40 flag in the HT capabilities and instead introduce a bandwidth field indicating the currently usable bandwidth to transmit to the station. Of course, make all drivers use it. To achieve this, make ieee80211_ht_cap_ie_to_sta_ht_cap() get the station as an argument, rather than the new capabilities, so it can set up the new bandwidth field. If the station is a VHT station and VHT bandwidth is in use, also set the bandwidth accordingly. Doing this allows us to get rid of the supports_40mhz flag as the HT capabilities now reflect the true capability instead of the current setting. While at it, also fix ieee80211_ht_cap_ie_to_sta_ht_cap() to not ignore HT cap overrides when MCS TX isn't supported (not that it really happens...) Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-12mac80211: allow driver to be stateless wrt. SMSP requestsEmmanuel Grumbach
Bail out if no update is made to the SMPS state. This allows the driver to avoid duplicating the state. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-03mac80211: unset peer's HT 40 MHz support if not usableJohannes Berg
When an interface is configured to a 20 MHz channel and the device as well as the peer are 40 MHz capable the HT capabilities of the peer are not restricted to 20 MHz, even though they're supposed to be restricted to the currently possible capabilities. Unset the 40 MHz HT capability bits in this case. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-03mac80211: split aggregation stop by reasonJohannes Berg
The initiator/tx doesn't really identify why an aggregation session is stopped, give a reason for stopping that more clearly identifies what's going on. This will help tell the driver clearly what is expected of it. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-03mac80211: Allow disabling SGI-20Ben Greear
This allows user-space (wpa_supplicant) to disable short guard interval (SGI) for 20Mhz. The SGI-40 disable option is already handled. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-19mac80211: introduce IEEE80211_NUM_TIDS and use itJohannes Berg
Introduce IEEE80211_NUM_TIDS in the generic 802.11 header file and use it in place of STA_TID_NUM and NUM_RX_DATA_QUEUES which are both really the number of TIDs. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-24mac80211: clean up debuggingJohannes Berg
There are a few things that make the logging and debugging in mac80211 less useful than it should be right now: * a lot of messages should be pr_info, not pr_debug * wholesale use of pr_debug makes it require *both* Kconfig and dynamic configuration * there are still a lot of ifdefs * the style is very inconsistent, sometimes the sdata->name is printed in front Clean up everything, introducing new macros and separating out the station MLME debugging into a new Kconfig symbol. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-05-15net: Convert net_ratelimit uses to net_<level>_ratelimitedJoe Perches
Standardize the net core ratelimited logging functions. Coalesce formats, align arguments. Change a printk then vprintk sequence to use printf extension %pV. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-10mac80211: set HT channel before associationJohannes Berg
Changing the channel type during operation is confusing to some drivers and will be hard to handle in multi-channel scenarios. Instead of changing the channel, set it to the right HT channel before authenticating/associating and don't change it -- just update the 20/40 MHz restrictions in rate control as needed when changed by the AP. This also fixes a problem that Paul missed in his fix for the "regulatory makes us deaf" issue -- when we couldn't use 40 MHz we still associated saying we were using 40 MHz, which could in similarly broken APs make us never even connect successfully. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-15mac80211: Use appropriate TID for sending BAR, ADDBA and DELBA framesHelmut Schaa
Currently BAR, ADDBA and DELBA frames are always sent using AC_VO. If the TID for which a BA session is established is assigned to a different queue BAR, ADDBA and DELBA frames can "overtake" frames of the according BA session. Hence, always put BA session related frames into the same queue as the BA sessions data frames. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-06mac80211: Remove WARN_ON in apply-ht-override logic.Ben Greear
AP interfaces routinely call this logic, so just silently return when this happens instead of splatting the kernel logs. Reported-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-06mac80211: Add HT operation modes for IBSSAlexander Simon
The HT mode is set by iw (previous patchsets). The interface is set into the specified HT mode. HT mode and capabilities are announced in beacons. If we add a station that uses HT also, the fastest matching HT mode will be used for transmission. That means if we are using HT40+ and we add a station running on HT40-, we would transfer at HT20. If we join an IBSS with HT40, but the secondary channel is not available, we will fall back into HT20 as well. Allow frame aggregation to start in IBSS mode. Signed-off-by: Alexander Simon <an.alexsimon@googlemail.com> [siwu@hrz.tu-chemnitz.de: Updates] * remove implicit channel_type enum assumptions * use rate_control_rate_init() if channel type changed * remove channel flags check * activate HT IBSS feature support * slightly reword commit message * rebase on wireless-testing Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-28mac80211: Make __check_htcap_disable static.Ben Greear
Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-22Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux Conflicts: drivers/net/wireless/iwlegacy/iwl-debugfs.c drivers/net/wireless/iwlegacy/iwl-rx.c drivers/net/wireless/iwlegacy/iwl-scan.c drivers/net/wireless/iwlegacy/iwl-tx.c include/net/bluetooth/bluetooth.h
2011-11-21mac80211: Support ht-cap over-rides.Ben Greear
This implements ht-cap over-rides for mac80211 drivers. HT may be disabled, making an /a/b/g/n station act like an a/b/g station. HT40 may be disabled forcing the station to be HT20 even if the AP and local hardware support HT40. MAX-AMSDU may be disabled. AMPDU-Density may be increased. AMPDU-Factor may be decreased. This has been successfully tested with ath9k using patched wpa_supplicant and iw. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-08mac80211: allow frame aggregation for meshThomas Pedersen
Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: Ashok Nagarajan <anagar6@uic.edu> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-31net: Add export.h for EXPORT_SYMBOL/THIS_MODULE to non-modulesPaul Gortmaker
These files are non modular, but need to export symbols using the macros now living in export.h -- call out the include so that things won't break when we remove the implicit presence of module.h from everywhere. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-09-30mac80211: optimise station flagsJohannes Berg
The flaglock in struct sta_info has long been something that I wanted to get rid of, this finally does the conversion to atomic bitops. The conversion itself is straight-forward in most places, a few things needed to change a bit since we can no longer use multiple bits at the same time. On x86-64, this is a fairly significant code size reduction: text data bss dec hex 427861 23648 1008 452517 6e7a5 before 425383 23648 976 450007 6ddd7 after Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-13mac80211: Remove unnecessary OOM logging messagesJoe Perches
Removing unnecessary messages saves code and text. Site specific OOM messages are duplications of a generic MM out of memory message and aren't really useful, so just delete them. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-07mac80211: Stop BA session event from deviceShahar Levi
Some devices support BT/WLAN co-existence algorigthms. In order not to harm the system performance and user experience, the device requests not to allow any RX BA session and tear down existing RX BA sessions based on system constraints such as periodic BT activity that needs to limit WLAN activity (eg.SCO or A2DP). In such cases, the intention is to limit the duration of the RX PPDU and therefore prevent the peer device to use A-MPDU aggregation. Adding ieee80211_stop_rx_ba_session() callback that can be used by the driver to stop existing BA sessions. Signed-off-by: Shahar Levi <shahar_levi@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-16mac80211: sparse RCU annotationsJohannes Berg
This adds sparse RCU annotations to most of mac80211, only the mesh code remains to be done. Due the the previous patches, the annotations are pretty simple. The only thing that this actually changes is removing the RCU usage of key->sta in debugfs since this pointer isn't actually an RCU-managed pointer (it only has a single assignment done before the key even goes live). As that is otherwise harmless, I decided to make it part of this patch. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-16mac80211: fix TX a-MPDU lockingJohannes Berg
During my quest to make mac80211 not have any RCU warnings from sparse, I came across the a-MPDU code again and it wasn't quite clear why it isn't racy. So instead of assigning the tid_tx array with just the spinlock held in ieee80211_start_tx_ba_session use a separate temporary array protected only by the spinlock and protect all assignments to the "live" array by both the spinlock and the mutex so that other code is easily verified to be correct. Due to pointer assignment atomicity I don't think this is a real issue, but I'm not sure, especially on Alpha the current code might be problematic. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-25mac80211: copy peer MCS TX parametersJohannes Berg
We need to copy this to allow drivers to look at the information where needed. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-13mac80211: fix SMPS requestJohannes Berg
It looks like I submitted a different patch than I tested, because clearly the code in mac80211 is missing actually propagating the requested SMPS mode. Fix that! Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-06mac80211: avoid transmitting delBA to old APJohannes Berg
When roaming while we have active BA session, we can end up transmitting delBA frames to the old AP while we're already on the new AP's channel, which can cause warnings. Simply avoid sending those frames, but still tear down the internal session state, since they are not really necessary anyway as we will implicitly disassociate when sending the association to the new AP. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-16mac80211: allow drivers to request SM PS mode changeJohannes Berg
Sometimes drivers have more information than the stack about how their antennas/chains are used, and may require that the SM PS mode be changed. This could happen, for example, when detecting that the user disconnected an antenna. Thus this patch introduces API to allow drivers to request SM PS mode changes. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-16mac80211: skip HT parsing if HW does not support HTChristian Lamparter
This patch will also fix the odd freeze which occurred when minstrel_ht connects to an 802.11n network with legacy hardware. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-14mac80211: change TX aggregation lockingJohannes Berg
To prepare for allowing drivers to sleep in ampdu_action, change the locking in the TX aggregation code to use the mutex the RX part already uses. The spinlock is still necessary around some code to avoid races with TX, but now we can also synchronize_net() to avoid getting an inconsistent sequence number. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-14mac80211: change RX aggregation lockingJohannes Berg
To prepare for allowing drivers to sleep in ampdu_action, change the locking in the RX aggregation code to use a mutex, so that it would already allow drivers to sleep. But explicitly disable BHs around the callback for now since the TX part cannot yet sleep, and drivers' locking might require it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-14mac80211: defer RX agg session teardown to workJohannes Berg
Since we want the code to be able to sleep in the future, it must not be called from the timer directly. To prepare, move it out into the aggregation work. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>