summaryrefslogtreecommitdiff
path: root/net/mac80211/tx.c
AgeCommit message (Collapse)Author
2014-03-20Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
2014-03-19mac80211: fix WPA with VLAN on AP side with ps-sta againMichael Braun
commit de74a1d9032f4d37ea453ad2a647e1aff4cd2591 "mac80211: fix WPA with VLAN on AP side with ps-sta" fixed an issue where queued multicast packets would be sent out encrypted with the key of an other bss. commit "7cbf9d017dbb5e3276de7d527925d42d4c11e732" "mac80211: fix oops on mesh PS broadcast forwarding" essentially reverted it, because vif.type cannot be AP_VLAN due to the check to vif.type in ieee80211_get_buffered_bc before. As the later commit intended to fix the MESH case, fix it by checking for IFTYPE_AP instead of IFTYPE_AP_VLAN. Cc: stable@vger.kernel.org Fixes: 7cbf9d017dbb ("mac80211: fix oops on mesh PS broadcast forwarding") Signed-off-by: Michael Braun <michael-dev@fami-braun.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-03-04Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless Conflicts: drivers/net/wireless/ath/ath9k/recv.c drivers/net/wireless/mwifiex/pcie.c
2014-02-20mac80211: fix AP powersave TX vs. wakeup raceEmmanuel Grumbach
There is a race between the TX path and the STA wakeup: while a station is sleeping, mac80211 buffers frames until it wakes up, then the frames are transmitted. However, the RX and TX path are concurrent, so the packet indicating wakeup can be processed while a packet is being transmitted. This can lead to a situation where the buffered frames list is emptied on the one side, while a frame is being added on the other side, as the station is still seen as sleeping in the TX path. As a result, the newly added frame will not be send anytime soon. It might be sent much later (and out of order) when the station goes to sleep and wakes up the next time. Additionally, it can lead to the crash below. Fix all this by synchronising both paths with a new lock. Both path are not fastpath since they handle PS situations. In a later patch we'll remove the extra skb queue locks to reduce locking overhead. BUG: unable to handle kernel NULL pointer dereference at 000000b0 IP: [<ff6f1791>] ieee80211_report_used_skb+0x11/0x3e0 [mac80211] *pde = 00000000 Oops: 0000 [#1] SMP DEBUG_PAGEALLOC EIP: 0060:[<ff6f1791>] EFLAGS: 00210282 CPU: 1 EIP is at ieee80211_report_used_skb+0x11/0x3e0 [mac80211] EAX: e5900da0 EBX: 00000000 ECX: 00000001 EDX: 00000000 ESI: e41d00c0 EDI: e5900da0 EBP: ebe458e4 ESP: ebe458b0 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 CR0: 8005003b CR2: 000000b0 CR3: 25a78000 CR4: 000407d0 DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 DR6: ffff0ff0 DR7: 00000400 Process iperf (pid: 3934, ti=ebe44000 task=e757c0b0 task.ti=ebe44000) iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command LQ_CMD (#4e), seq: 0x0903, 92 bytes at 3[3]:9 Stack: e403b32c ebe458c4 00200002 00200286 e403b338 ebe458cc c10960bb e5900da0 ff76a6ec ebe458d8 00000000 e41d00c0 e5900da0 ebe458f0 ff6f1b75 e403b210 ebe4598c ff723dc1 00000000 ff76a6ec e597c978 e403b758 00000002 00000002 Call Trace: [<ff6f1b75>] ieee80211_free_txskb+0x15/0x20 [mac80211] [<ff723dc1>] invoke_tx_handlers+0x1661/0x1780 [mac80211] [<ff7248a5>] ieee80211_tx+0x75/0x100 [mac80211] [<ff7249bf>] ieee80211_xmit+0x8f/0xc0 [mac80211] [<ff72550e>] ieee80211_subif_start_xmit+0x4fe/0xe20 [mac80211] [<c149ef70>] dev_hard_start_xmit+0x450/0x950 [<c14b9aa9>] sch_direct_xmit+0xa9/0x250 [<c14b9c9b>] __qdisc_run+0x4b/0x150 [<c149f732>] dev_queue_xmit+0x2c2/0xca0 Cc: stable@vger.kernel.org Reported-by: Yaara Rozenblum <yaara.rozenblum@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Stanislaw Gruszka <sgruszka@redhat.com> [reword commit log, use a separate lock] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-13Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
2014-02-06mac80211: fix fragmentation code, particularly for encryptionJohannes Berg
The "new" fragmentation code (since my rewrite almost 5 years ago) erroneously sets skb->len rather than using skb_trim() to adjust the length of the first fragment after copying out all the others. This leaves the skb tail pointer pointing to after where the data originally ended, and thus causes the encryption MIC to be written at that point, rather than where it belongs: immediately after the data. The impact of this is that if software encryption is done, then a) encryption doesn't work for the first fragment, the connection becomes unusable as the first fragment will never be properly verified at the receiver, the MIC is practically guaranteed to be wrong b) we leak up to 8 bytes of plaintext (!) of the packet out into the air This is only mitigated by the fact that many devices are capable of doing encryption in hardware, in which case this can't happen as the tail pointer is irrelevant in that case. Additionally, fragmentation is not used very frequently and would normally have to be configured manually. Fix this by using skb_trim() properly. Cc: stable@vger.kernel.org Fixes: 2de8e0d999b8 ("mac80211: rewrite fragmentation") Reported-by: Jouni Malinen <j@w1.fi> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-04mac80211: fix bufferable MMPDU RX handlingJohannes Berg
Action, disassoc and deauth frames are bufferable, and as such don't have the PM bit in the frame control field reserved which means we need to react to the bit when receiving in such a frame. Fix this by introducing a new helper ieee80211_is_bufferable_mmpdu() and using it for the RX path that currently ignores the PM bit in any non-data frames for doze->wake transitions, but listens to it in all frames for wake->doze transitions, both of which are wrong. Also use the new helper in the TX path to clean up the code. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-04mac80211: add length check in ieee80211_is_robust_mgmt_frame()Johannes Berg
A few places weren't checking that the frame passed to the function actually has enough data even though the function clearly documents it must have a payload byte. Make this safer by changing the function to take an skb and checking the length inside. The old version is preserved for now as the rtl* drivers use it and don't have a correct skb. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-04mac80211: only set CSA beacon when at least one beacon must be transmittedLuciano Coelho
A beacon should never have a Channel Switch Announcement information element with a count of 0, because a count of 1 means switch just before the next beacon. So, if a count of 0 was valid in a beacon, it would have been transmitted in the next channel already, which is useless. A CSA count equal to zero is only meaningful in action frames or probe_responses. Fix the ieee80211_csa_is_complete() and ieee80211_update_csa() functions accordingly. With a CSA count of 0, we won't transmit any CSA beacons, because the switch will happen before the next TBTT. To avoid extra work and potential confusion in the drivers, complete the CSA immediately, instead of waiting for the driver to call ieee80211_csa_finish(). To keep things simpler, we also switch immediately when the CSA count is 1, while in theory we should delay the switch until just before the next TBTT. Additionally, move the ieee80211_csa_finish() function to cfg.c, where it makes more sense. Tested-by: Simon Wunderlich <sw@simonwunderlich.de> Acked-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-01-17Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
2014-01-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2014-01-10mac80211: reset TX info flags when frame will be reprocessedJohannes Berg
The temporary TX info flags need to be cleared if the frame will be processed through the TX handlers again, otherwise it can get messed up. This fixes a bug that happened when an aggregation session was stopped while the station was sleeping - some frames might get transmitted marked as aggregation erroneously without this fix. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-18mac80211: fix checkpatch errorsWeilong Chen
Fix a number of different checkpatch errors. Signed-off-by: Weilong Chen <chenweilong@huawei.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-16mac80211: move "bufferable MMPDU" check to fix AP mode scanFelix Fietkau
The check needs to apply to both multicast and unicast packets, otherwise probe requests on AP mode scans are sent through the multicast buffer queue, which adds long delays (often longer than the scanning interval). Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-16mac80211: update adjusting TBTT bit in beaconThomas Pedersen
This regression was introduced in "mac80211: cache mesh beacon". mesh_sync_offset_adjust_tbtt() was assuming that the beacon would be rebuilt in every single pre-tbtt interrupt, but now the beacon update happens on the workqueue, and it must be ready for immediate delivery to the driver. Save a pointer to the meshconf IE in the beacon_data (this works because both the IE pointer and beacon buffer are protected by the same rcu_{dereference,assign_pointer}()) for quick updates during pre-tbtt. This is faster and a little prettier than iterating over the elements to find the meshconf IE every time. Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-16mac80211: let the driver reserve extra tailroom in beaconsFelix Fietkau
Can be used to add extra IEs (such as P2P NoA) without having to reallocate the buffer. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-02mac80211: Tx frame latency statisticsMatti Gottlieb
Measure TX latency and jitter statistics per station per TID. These Measurements are disabled by default and can be enabled via debugfs. Features included for each station's TID: 1. Keep count of the maximum and average latency of Tx frames. 2. Keep track of many frames arrived in a specific time range (need to enable through debugfs and configure the bins ranges) Signed-off-by: Matti Gottlieb <matti.gottlieb@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25mac80211: add generic cipher scheme supportMax Stepanov
This adds generic cipher scheme support to mac80211, such schemes are fully under control by the driver. On hw registration drivers may specify additional HW ciphers with a scheme how these ciphers have to be handled by mac80211 TX/RR. A cipher scheme specifies a cipher suite value, a size of the security header to be added to or stripped from frames and how the PN is to be verified on RX. Signed-off-by: Max Stepanov <Max.Stepanov@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25cfg80211: consolidate passive-scan and no-ibss flagsLuis R. Rodriguez
These two flags are used for the same purpose, just combine them into a no-ir flag to annotate no initiating radiation is allowed. Old userspace sending either flag will have it treated as the no-ir flag. To be considerate to older userspace we also send both the no-ir flag and the old no-ibss flags. Newer userspace will have to be aware of older kernels. Update all places in the tree using these flags with the following semantic patch: @@ @@ -NL80211_RRF_PASSIVE_SCAN +NL80211_RRF_NO_IR @@ @@ -NL80211_RRF_NO_IBSS +NL80211_RRF_NO_IR @@ @@ -IEEE80211_CHAN_PASSIVE_SCAN +IEEE80211_CHAN_NO_IR @@ @@ -IEEE80211_CHAN_NO_IBSS +IEEE80211_CHAN_NO_IR @@ @@ -NL80211_RRF_NO_IR | NL80211_RRF_NO_IR +NL80211_RRF_NO_IR @@ @@ -IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_IR +IEEE80211_CHAN_NO_IR @@ @@ -(NL80211_RRF_NO_IR) +NL80211_RRF_NO_IR @@ @@ -(IEEE80211_CHAN_NO_IR) +IEEE80211_CHAN_NO_IR Along with some hand-optimisations in documentation, to remove duplicates and to fix some indentation. Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> [do all the driver updates in one go] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-05Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Conflicts: net/wireless/reg.c
2013-11-04Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless Conflicts: drivers/net/wireless/iwlwifi/pcie/drv.c
2013-10-28{nl,cfg,mac}80211: implement mesh channel switch userspace APIChun-Yeow Yeoh
Implement the required procedures for mesh channel switching as defined in the IEEE Std 802.11-2012 section 10.9.8.4.3 and also handle the CSA and MCSP elements as followed: * Add the function for updating the beacon and probe response frames with CSA and MCSP elements during the period of switching to the new channel. Both CSA and MCSP elements must be included in beacon and probe response frames until the intended channel switch time. * The ifmsh->csa_settings is set to NULL and the CSA and MCSP elements will then be removed from the beacon or probe response frames once the new channel is switched to. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-28mac80211: add ieee80211_tx_prepare_skb() helper functionFelix Fietkau
This can be used by a driver to prepare skbs for transmission, which were obtained via functions such as ieee80211_probereq_get or ieee80211_nullfunc_get. This is useful for drivers that want to send those frames directly, but need rate control information to be prepared first. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-09-30mac80211: use sta_info_get_bss() for nl80211 tx and client probingFelix Fietkau
This allows calls for clients in AP_VLANs (e.g. for 4-addr) to succeed Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-09-26mac80211: add support for CSA in IBSS modeSimon Wunderlich
This function adds the channel switch announcement implementation for the IBSS code. It is triggered by userspace (mac80211/cfg) or by external channel switch announcement, which have to be adopted. Both CSAs in beacons and action frames are supported. As for AP mode, the channel switch is applied after some time. However in IBSS mode, the channel switch IEs are generated in the kernel. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-09-26mac80211: Remove superfluous is_multicast_ether_addr() callSergey Ryazanov
Remove superfluous call and use locally stored previous result. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-08-23mac80211: assign seqnums for group QoS framesBob Copeland
According to 802.11-2012 9.3.2.10, paragraph 4, QoS data frames with a group address in the Address 1 field have sequence numbers allocated from the same counter as non-QoS data and management frames. Without this flag, some drivers may not assign sequence numbers, and in rare cases frames might get dropped. Set the control flag accordingly. Signed-off-by: Bob Copeland <bob@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-08-12mac80211: add control port protocol TX control flagJohannes Berg
A lot of drivers check the frame protocol for ETH_P_PAE, for various reasons (like making those more reliable). Add a new flags bitmap to the TX control info and a new flag indicating the control port protocol is in use to let all drivers also apply such logic to other control port protocols, should they be configured. Also use the new flag in the iwlwifi drivers. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-08-01mac80211: add channel switch command and beacon callbacksSimon Wunderlich
The count field in CSA must be decremented with each beacon transmitted. This patch implements the functionality for drivers using ieee80211_beacon_get(). Other drivers must call back manually after reaching count == 0. This patch also contains the handling and finish worker for the channel switch command, and mac80211/chanctx code to allow to change a channel definition of an active channel context. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> [small cleanups, catch identical chandef] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-08-01mac80211: use oneshot blink API for LED triggersFabio Baltieri
Change mac80211 LED trigger code to use the generic led_trigger_blink_oneshot() API for transmit and receive activity indication. This gives a better feedback to the user, as with the new API each activity event results in a visible blink, while a constant traffic results in a continuous blink at constant rate. Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com> [fix LED disabled build error] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-07-16mac80211: make active monitor injection work w/ HW queueJohannes Berg
When a driver (like hwsim) uses HW queue control an active monitor vif needs to be used for the queues, make the code do that. Otherwise we'd bail out and drop the frames. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-07-16mac80211: select and adjust bitrates according to channel modeSimon Wunderlich
The various components accessing the bitrates table must use consider the used channel bandwidth to select only available rates or calculate the bitrate correctly. There are some rates in reduced bandwidth modes which can't be represented as multiples of 500kbps, like 2.25 MBit/s in 5 MHz mode. The standard suggests to round up to the next multiple of 500kbps, just do that in mac80211 as well. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> [make rate unsigned in ieee80211_add_tx_radiotap_header(), squash fix] Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2013-07-16mac80211: fix timing for 5 MHz and 10 MHz channelsSimon Wunderlich
according to IEEE 802.11-2012 section 18, various timings change when using 5 MHz and 10 MHz. Reflect this by using a "shift" when calculating durations. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2013-06-03mac80211: don't check local mesh TTL on TXThomas Pedersen
nl80211 has already verified the mesh TTL on setting the mesh config, so no need to check it again in mac80211. Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-05-29mac80211: always send multicast on CAB queueJohannes Berg
If the driver advertised support for a CAB queue, then we should put all multicast frames there, otherwise sending them can be racy with clients going to sleep while we TX a frame. To avoid this, always TX multicast frames on the multicast queue. It seems like even drivers not using the queue framework might want to do this which would mean also moving the IEEE80211_TX_CTL_SEND_AFTER_DTIM flag assignment, but it also seems that drivers behave differently here so that just moving it wouldn't be a good idea. It'd be better to modify those drivers to use the queue framework. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-24Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
2013-04-22mac80211: improve the rate control APIFelix Fietkau
Allow rate control modules to pass a rate selection table to mac80211 and the driver. This allows drivers to fetch the most recent rate selection from the sta pointer for already buffered frames. This allows rate control to respond faster to sudden link changes and it is also a step towards adding minstrel_ht support to drivers like iwlwifi. When a driver sets IEEE80211_HW_SUPPORTS_RC_TABLE, mac80211 will not fill info->control.rates with rates from the rate table (to preserve explicit overrides by the rate control module). The driver then explicitly calls ieee80211_get_tx_rates to merge overrides from info->control.rates with defaults from the sta rate table. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-16mac80211: fix CTS protection handlingFelix Fietkau
The rates[0] CTS and RTS flags are only set after rate control has been called, so minstrel cannot use them to for setting the number of retries. This patch adds two new flags to explicitly indicate RTS/CTS use. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-16mac80211: fix and optimize MCS mask handlingFelix Fietkau
Currently the code always copies the configured MCS mask (even if it is set to default), but only uses it if legacy rates were also masked out. Fix this by adding a flag that tracks whether the configured MCS mask is set to default or not. Optimize the code further by storing a pointer to the configured rate mask in txrc instead of using memcpy. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-16mac80211: fix rate control tx handler for VHT ratesKarl Beldan
Handle VHT rates like HT ones, otherwise we easily trigger the pre-HT rates WARN_ON(rc_rate->idx >= sband->n_bitrates) which will set rc_rate->idx to -1. Signed-off-by: Karl Beldan <karl.beldan@rivierawaves.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-11mac80211: always pick a basic rate to tx RTS/CTS for pre-HT ratesKarl Beldan
When the 1st rate control entry is a pre-HT rate we want to set rts_cts_rate_idx "as the fastest basic rate that is not faster than the data rate"(code comments). But in case some bss allowed rate indexes are lower than the lowest bss basic rate, if the rate control selects a rate among the formers for its 1st rate control entry, rts_cts_rate_idx remains 0 and is not a basic rate index. This commit sets rts_cts_rate_idx to the lowest bss basic rate index in this situation. Note that the code assumes that lowest indexes == lowest bitrates. Signed-off-by: Karl Beldan <karl.beldan@rivierawaves.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-10Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem Conflicts: drivers/net/wireless/rt2x00/rt2x00pci.c net/mac80211/sta_info.c net/wireless/core.h
2013-03-28net: add ETH_P_802_3_MINSimon Horman
Add a new constant ETH_P_802_3_MIN, the minimum ethernet type for an 802.3 frame. Frames with a lower value in the ethernet type field are Ethernet II. Also update all the users of this value that David Miller and I could find to use the new constant. Also correct a bug in util.c. The comparison with ETH_P_802_3_MIN should be >= not >. As suggested by Jesse Gross. Compile tested only. Cc: David Miller <davem@davemloft.net> Cc: Jesse Gross <jesse@nicira.com> Cc: Karsten Keil <isdn@linux-pingi.de> Cc: John W. Linville <linville@tuxdriver.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Bart De Schuymer <bart.de.schuymer@pandora.be> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Patrick McHardy <kaber@trash.net> Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Johan Hedberg <johan.hedberg@gmail.com> Cc: linux-bluetooth@vger.kernel.org Cc: netfilter-devel@vger.kernel.org Cc: bridge@lists.linux-foundation.org Cc: linux-wireless@vger.kernel.org Cc: linux1394-devel@lists.sourceforge.net Cc: linux-media@vger.kernel.org Cc: netdev@vger.kernel.org Cc: dev@openvswitch.org Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-25mac80211: Use a cfg80211_chan_def in ieee80211_hw_conf_chanKarl Beldan
Drivers that don't use chanctxes cannot perform VHT association because they still use a "backward compatibility" pair of {ieee80211_channel, nl80211_channel_type} in ieee80211_conf and ieee80211_local. Signed-off-by: Karl Beldan <karl.beldan@rivierawaves.com> [fix kernel-doc] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-25mac80211: ibss: use beacon_data struct for beacon and probe responseJohannes Berg
Instead of having an SKB all the time, use a beacon_data struct with just the information required. This also allows removing a synchronize_rcu() and using kfree_rcu() instead. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-18mac80211: stop queues temporarily for flushingJohannes Berg
Sometimes queues are flushed in the middle of operation, which can lead to driver issues. Stop queues temporarily, while flushing, to avoid transmitting new packets while they are being flushed. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-07mac80211: provide race-free 64-bit traffic countersJohannes Berg
Make the TX bytes/packets counters race-free by keeping them per AC so concurrent TX on queues can't cause lost or wrong updates. This works since each station belongs to a single interface. While at it also make the bytes counters 64-bit. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-06Merge remote-tracking branch 'mac80211/master' into HEADJohannes Berg
There are a few things that would otherwise conflict. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-06Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2013-03-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: "A moderately sized pile of fixes, some specifically for merge window introduced regressions although others are for longer standing items and have been queued up for -stable. I'm kind of tired of all the RDS protocol bugs over the years, to be honest, it's way out of proportion to the number of people who actually use it. 1) Fix missing range initialization in netfilter IPSET, from Jozsef Kadlecsik. 2) ieee80211_local->tim_lock needs to use BH disabling, from Johannes Berg. 3) Fix DMA syncing in SFC driver, from Ben Hutchings. 4) Fix regression in BOND device MAC address setting, from Jiri Pirko. 5) Missing usb_free_urb in ISDN Hisax driver, from Marina Makienko. 6) Fix UDP checksumming in bnx2x driver for 57710 and 57711 chips, fix from Dmitry Kravkov. 7) Missing cfgspace_lock initialization in BCMA driver. 8) Validate parameter size for SCTP assoc stats getsockopt(), from Guenter Roeck. 9) Fix SCTP association hangs, from Lee A Roberts. 10) Fix jumbo frame handling in r8169, from Francois Romieu. 11) Fix phy_device memory leak, from Petr Malat. 12) Omit trailing FCS from frames received in BGMAC driver, from Hauke Mehrtens. 13) Missing socket refcount release in L2TP, from Guillaume Nault. 14) sctp_endpoint_init should respect passed in gfp_t, rather than use GFP_KERNEL unconditionally. From Dan Carpenter. 15) Add AISX AX88179 USB driver, from Freddy Xin. 16) Remove MAINTAINERS entries for drivers deleted during the merge window, from Cesar Eduardo Barros. 17) RDS protocol can try to allocate huge amounts of memory, check that the user's request length makes sense, from Cong Wang. 18) SCTP should use the provided KMALLOC_MAX_SIZE instead of it's own, bogus, definition. From Cong Wang. 19) Fix deadlocks in FEC driver by moving TX reclaim into NAPI poll, from Frank Li. Also, fix a build error introduced in the merge window. 20) Fix bogus purging of default routes in ipv6, from Lorenzo Colitti. 21) Don't double count RTT measurements when we leave the TCP receive fast path, from Neal Cardwell." * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (61 commits) tcp: fix double-counted receiver RTT when leaving receiver fast path CAIF: fix sparse warning for caif_usb rds: simplify a warning message net: fec: fix build error in no MXC platform net: ipv6: Don't purge default router if accept_ra=2 net: fec: put tx to napi poll function to fix dead lock sctp: use KMALLOC_MAX_SIZE instead of its own MAX_KMALLOC_SIZE rds: limit the size allocated by rds_message_alloc() MAINTAINERS: remove eexpress MAINTAINERS: remove drivers/net/wan/cycx* MAINTAINERS: remove 3c505 caif_dev: fix sparse warnings for caif_flow_cb ax88179_178a: ASIX AX88179_178A USB 3.0/2.0 to gigabit ethernet adapter driver sctp: use the passed in gfp flags instead GFP_KERNEL ipv[4|6]: correct dropwatch false positive in local_deliver_finish l2tp: Restore socket refcount when sendmsg succeeds net/phy: micrel: Disable asymmetric pause for KSZ9021 bgmac: omit the fcs phy: Fix phy_device_free memory leak bnx2x: Fix KR2 work-around condition ...
generated by cgit v0.10.2 at 2024-10-10 08:06:34 (GMT)