summaryrefslogtreecommitdiff
path: root/net/mac80211
AgeCommit message (Collapse)Author
2012-12-13Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial branch from Jiri Kosina: "Usual stuff -- comment/printk typo fixes, documentation updates, dead code elimination." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits) HOWTO: fix double words typo x86 mtrr: fix comment typo in mtrr_bp_init propagate name change to comments in kernel source doc: Update the name of profiling based on sysfs treewide: Fix typos in various drivers treewide: Fix typos in various Kconfig wireless: mwifiex: Fix typo in wireless/mwifiex driver messages: i2o: Fix typo in messages/i2o scripts/kernel-doc: check that non-void fcts describe their return value Kernel-doc: Convention: Use a "Return" section to describe return values radeon: Fix typo and copy/paste error in comments doc: Remove unnecessary declarations from Documentation/accounting/getdelays.c various: Fix spelling of "asynchronous" in comments. Fix misspellings of "whether" in comments. eisa: Fix spelling of "asynchronous". various: Fix spelling of "registered" in comments. doc: fix quite a few typos within Documentation target: iscsi: fix comment typos in target/iscsi drivers treewide: fix typo of "suport" in various comments and Kconfig treewide: fix typo of "suppport" in various comments ...
2012-12-11Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
2012-12-11Merge branch 'for-john' of git://git.sipsolutions.net/mac80211-nextJohn W. Linville
2012-12-11net: remove obsolete simple_strto<foo>Abhijit Pawar
This patch removes the redundant occurences of simple_strto<foo> Signed-off-by: Abhijit Pawar <abhi.c.pawar@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-10minstrel: update stats after processing statusJohannes Berg
Instead of updating stats before sending a packet, update them after processing the packet's status. This makes minstrel in line with minstrel_ht. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-12-10mac80211: a few whitespace fixesJohannes Berg
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-12-10net: remove obsolete simple_strto<foo>Abhijit Pawar
This patch replace the obsolete simple_strto<foo> with kstrto<foo> Signed-off-by: Abhijit Pawar <abhi.c.pawar@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-07mac80211: warn only once if ampdu_action isn't assignedChaitanya
New drivers that might not support ampdu_action yet while in development cause a lot of warnings, use WARN_ON_ONCE instead. Signed-off-by: T Krushna Chaitanya <chaitanyatk@posedge.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-12-06Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Conflicts: drivers/net/wireless/mwifiex/sta_ioctl.c net/mac80211/scan.c
2012-12-06Merge tag 'nfc-fixes-3.7-2' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/nfc-3.0 This is an NFC LLCP fix for 3.7 and contains only one patch. It fixes a potential crash when receiving an LLCP HDLC frame acking a frame that is not the last sent one. In that case we may dereference an already freed pointer.
2012-12-06mac80211: cancel work instead of waiting for it to do nothingJohannes Berg
If the sdata work is pending while the interface is stopped, we currently flush it. If it's not running this means waiting for it to run, which could take a while if the workqueue is backlogged. However, the work exits right away if it starts to run while the interface is already stopping. There's no point in waiting for that, so use cancel_work_sync() instead. Reported-by: Ben Greear <greearb@candelatech.com> Tested-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-12-06mac80211: don't drop mesh peering frames from unknown STAMarco Porsch
Previously, mesh peering frames from a STA without a station entry were being dropped. Mesh Peering Open and other frames (WLAN_CATEGORY_SELF_PROTECTED) are valid mesh peering frames even if received from a yet unknown station; the STA entry will be created in mesh_peer_init later. The problem didn't occur previously since both STAs receive each other's beacons which created the STA entry. However, this causes an unnecessary delay and beacons might not be received if either node is in PS mode. Signed-off-by: Marco Porsch <marco.porsch@etit.tu-chemnitz.de> [reword commit log a bit] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-12-05mac80211: skip radiotap space calculation if no monitor existsHelmut Schaa
The radiotap header length "needed_headroom" is only required if we're sending the skb to a monitor interface. Hence, move the calculation a bit later so the calculation can be skipped if no monitor interface is present. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-12-05mac80211: introduce IEEE80211_HW_TEARDOWN_AGGR_ON_BAR_FAILStanislaw Gruszka
Commit f0425beda4d404a6e751439b562100b902ba9c98 "mac80211: retry sending failed BAR frames later instead of tearing down aggr" caused regression on rt2x00 hardware (connection hangs). This regression was fixed by commit be03d4a45c09ee5100d3aaaedd087f19bc20d01 "rt2x00: Don't let mac80211 send a BAR when an AMPDU subframe fails". But the latter commit caused yet another problem reported in https://bugzilla.kernel.org/show_bug.cgi?id=42828#c22 After long discussion in this thread: http://mid.gmane.org/20121018075615.GA18212@redhat.com and testing various alternative solutions, which failed on one or other setup, we have no other good fix for the issues like just revert both mentioned earlier commits. To do not affect other hardware which benefit from commit f0425beda4d404a6e751439b562100b902ba9c98, instead of reverting it, introduce flag that when used will restore mac80211 behaviour before the commit. Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> [replaced link with mid.gmane.org that has message-id] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-12-05mac80211: add debug file for mic failureSaravana
The mic failure count provides the number of mic failures that have happened on a given key (without a countermeasure being started, since that would remove the key). Signed-off-by: Saravana <saravanad@posedge.com> [fix NULL pointer issues] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-12-04mac80211: adapt slot time in IBSS modeSimon Wunderlich
In 5GHz/802.11a, we are allowed to use short slot times. Doing this may increases performance by 20% for legacy connections (54 MBit/s). I can confirm this in my tests (27% more throughput using iperf), and also have a small positive effect (5% more throughput) for HT rates, tested on 1 stream. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-12-03mac80211: return if CSA is not handleSimon Wunderlich
If channel contexts are enabled, the CSA should not be processed further. A return is missing here. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-30mac80211: simplify loop in minstrel_htJohannes Berg
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-30cfg80211: fix BSS struct IE access racesJohannes Berg
When a BSS struct is updated, the IEs are currently overwritten or freed. This can lead to races if some other CPU is accessing the BSS struct and using the IEs concurrently. Fix this by always allocating the IEs in a new struct that holds the data and length and protecting access to this new struct with RCU. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-30mac80211: remove probe response temporary buffer allocationJohannes Berg
Instead of allocating a temporary buffer to build IEs build them right into the SKB. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-30mac80211: make ieee80211_build_preq_ies saferJohannes Berg
Instead of assuming 200 bytes are always enough for all the IEs we add, give the length of the buffer to the function and warn instead of overrunning. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-30mac80211: allow userspace registration for probe requests in IBSSAntonio Quartulli
This change allows userspace to register for probe request frames on an IBSS interface. Userspace then has to handle them and send replies. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-30mac80211: fix for mesh sync to indicate TBTT adjustmentMarco Porsch
Currently the mesh sync code checks, whether peers indicate TBTT adjustment, but it never sets the corresponding flag itself. By setting ifmsh->tbtt_adjusting to true, it will set the corresponding field in the mesh configuration IE of own beacons. This indication will be set in the current beacon. The TBTT adjustment will be performed afterwards, affecting the next beacon. Thus, the first beacon with stable TBTT will not indicate adjustment anymore and peers will continue tracking the new offset. Signed-off-by: Marco Porsch <marco.porsch@etit.tu-chemnitz.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-29mac80211: add debugfs file for last rx rateSaravana
Add a debugfs file showing the rate at which the last packet is received. Signed-off-by: Saravana <saravanad@posedge.com> [fix whitespace] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-29mac80211: re-organize the rx rate calculation logicSaravana
Currently the logic to fill a struct rate_info with a STA's last RX rate is accessible only in the cfg.c. As the RX rate calculation might be needed elsewhere, split this out into a separate function. Signed-off-by: Saravana <saravanad@posedge.com> [fix various whitespace issues, reword commit log] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-29mac80211: add debugfs file for current tx rateSaravana
Add a debugfs file showing the current tx rate. The information available in the rc_stats file doesn't evidently provides us the current tx rate. This patch adds the support for the same. Signed-off-by: Saravana <saravanad@posedge.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-29mac80211: add debugfs file for last ack signalSaravana
Add a debugfs file showing the signal strength of the ack frame that is received for the currently sent tx packet Signed-off-by: Saravana <saravanad@posedge.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-28mac80211: don't reinit rate control when mesh sta existsHelmut Schaa
This fixes some unintended resets of the rate control statistics when minstrel_ht is used resulting in non-optimal throughput on mesh links. Tested-by: Emanuel Taube <emanuel.taube@gmail.com> Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-28mac80211: reject setting masked mac addressesHelmut Schaa
If a driver registers an address mask we should ensure that no interface gets an address assigned that isn't covered by the registered address mask. This prevents invalid configurations from reaching the device and causing problems. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> [change function flow to reduce indentation, fix locking] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-28mac80211: fix potential NULL dereferenceDan Carpenter
Smatch complains that we could dereference skb later in the function. It's probably unlikely, but we may as well return here and avoid it. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> [change summary] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-27mac80211: support P2P GO powersave configurationJohannes Berg
If the low-level driver wants to support P2P GO powersave configuration, it must set the cfg80211 flags and mac80211 will pass the parameters to it. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-27mac80211: support (partial) VHT radiotap informationJohannes Berg
Add some information that we have about VHT to radiotap. This at least lets one see the MCS and NSS information. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-27mac80211: support VHT associationJohannes Berg
Determine the VHT channel from the AP's VHT operation IE (if present) and configure the hardware to that channel if it is supported. If channel contexts cause a channel to not be usable, try a smaller bandwidth. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-26Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
2012-11-26mac80211: fix remain-on-channel (non-)cancellingJohannes Berg
Felix Liao reported that when an interface is set DOWN while another interface is executing a ROC, the warning in ieee80211_start_next_roc() (about the first item on the list having started already) triggers. This is because ieee80211_roc_purge() calls it even if it never actually changed the list of ROC items. To fix this, simply remove the function call. If it is needed then it will be done by the ieee80211_sw_roc_work() function when the ROC item that is being removed while active is cleaned up. Cc: stable@vger.kernel.org Reported-by: Felix Liao <Felix.Liao@watchguard.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-26mac80211: support VHT rates in TX infoJohannes Berg
To achieve this, limit the number of retries to 31 (instead of 255) and use the three bits that are then free for VHT flags. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-26mac80211: support drivers reporting VHT RXJohannes Berg
Add support to mac80211 for having drivers report received VHT MCS information. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-26mac80211: convert to channel definition structJohannes Berg
Convert mac80211 (and where necessary, some drivers a little bit) to the new channel definition struct. This will allow extending mac80211 for VHT, which is currently restricted to channel contexts since there are no drivers using that which makes it easier. As I also don't care about VHT for drivers not using the channel context API, I won't convert the previous API to VHT support. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-26nl80211/cfg80211: support VHT channel configurationJohannes Berg
Change nl80211 to support specifying a VHT (or HT) using the control channel frequency (as before) and new attributes for the channel width and first and second center frequency. The old channel type is of course still supported for HT. Also change the cfg80211 channel definition struct to support these by adding the relevant fields to it (and removing the _type field.) This also adds new helper functions: - cfg80211_chandef_create to create a channel def struct given the control channel and channel type, - cfg80211_chandef_identical to check if two channel definitions are identical - cfg80211_chandef_compatible to check if the given channel definitions are compatible, and return the wider of the two This isn't entirely complete, but that doesn't matter until we have a driver using it. In particular, it's missing - regulatory checks on the usable bandwidth (if that even makes sense) - regulatory TX power (database can't deal with it) - a proper channel compatibility calculation for the new channel types Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-26cfg80211: pass a channel definition structJohannes Berg
Instead of passing a channel pointer and channel type to all functions and driver methods, pass a new channel definition struct. Right now, this struct contains just the control channel and channel type, but for VHT this will change. Also, add a small inline cfg80211_get_chandef_type() so that drivers don't need to use the _type field of the new structure all the time, which will change. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-26cfg80211: remove remain-on-channel channel typeJohannes Berg
As mwifiex (and mac80211 in the software case) are the only drivers actually implementing remain-on-channel with channel type, userspace can't be relying on it. This is the case, as it's used only for P2P operations right now. Rather than adding a flag to tell userspace whether or not it can actually rely on it, simplify all the code by removing the ability to use different channel types. Leave only the validation of the attribute, so that if we extend it again later (with the needed capability flag), it can't break userspace sending invalid data. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-26mac80211: fix managed mode channel flags handlingJohannes Berg
If ieee80211_prep_channel() decides that HT should be disabled (because the HT IEs from the AP were invalid) it will set the IEEE80211_STA_DISABLE_HT to not send HT capabilities to the AP when associating. If this happens during authentication, the flag will be lost and we send HT frames, even if the channel config was set up for non-HT. This can lead to issues. Fix this by always resetting the ifmgd flags to zero when the channel context is released so that the flag resetting in ieee80211_mgd_assoc() isn't necessary. To make the code a bit easier move the call to release the channel in ieee80211_set_disassoc() to the end of the function together with the flag resetting (which needs to be at the end to avoid timers setting flags.) Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-26mac80211: remove mesh config macros from mesh_plink.cMarco Porsch
Use shortcut pointer instead where it is appropriate. Signed-off-by: Marco Porsch <marco.porsch@etit.tu-chemnitz.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-26mac80211: refactor ieee80211_set_qos_hdrMarco Porsch
Return early if not a QoS Data frame. Give proper documentation. Signed-off-by: Marco Porsch <marco.porsch@etit.tu-chemnitz.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-26mac80211: move Mesh Capability field definition to ieee80211.hMarco Porsch
Signed-off-by: Marco Porsch <marco.porsch@etit.tu-chemnitz.de> [prefix with IEEE80211_] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-26mac80211: in ADHOC print debug message for every Auth messageAntonio Quartulli
The debug message has to be printed also for an Auth message with auth_sequence != 1. This helps understanding whether the two Auth messages are exchanged correctly or not. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-26mac80211: in ADHOC don't update last_rx if sta is not authorizedAntonio Quartulli
It does not make sense to keep a station alive if it is not authorised at all. If IBSS/RSN is used it could also be the case that something went wrong during the keys exchange and the stations ended up in a not recoverable state. By not updating last_rx we are giving the station a chance to be deleted and to start the key exchange once again from scratch. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-23cfg80211: use DS or HT operation IEs to determine BSS channelJohannes Berg
Currently, mac80211 checks the DS params IE if present and uses it for the (primary) BSS channel, instead of the one that the frame was received on. This is particularly useful in the 2.4 GHz band since a frame is often received on one of the adjacent channels due to overlap. Move this code to cfg80211 so other drivers also do this. Additionally, on 5 GHz, in particular with some (possibly) upcoming changes in 802.11ai and duplicate transmissions when wider channels are used, something similar happens. So if present, also use the (primary) channel information contained in the HT operation IE. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-23mac80211: disable HT advertising unless AP supports itJohannes Berg
If the AP doesn't support HT, or more importantly if it does but we have to disable it because its IEs are broken, don't advertise HT support in our association request. Otherwise, we configure our channel to be a 20 MHz non-HT channel but the AP might still think we support HT, or even 40 MHz. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-23mac80211: rename IEEE80211_STA_DISABLE_11N to HTJohannes Berg
Since the 11n spec amendment was rolled into the 2012 version, "11n" no longer makes sense. Use "HT" instead. Signed-off-by: Johannes Berg <johannes.berg@intel.com>