| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Conflicts:
net/netfilter/core.c
net/netfilter/nf_tables_netdev.c
Resolve two conflicts before pull request for David's net-next tree:
1) Between c73c24849011 ("netfilter: nf_tables_netdev: remove redundant
ip_hdr assignment") from the net tree and commit ddc8b6027ad0
("netfilter: introduce nft_set_pktinfo_{ipv4, ipv6}_validate()").
2) Between e8bffe0cf964 ("net: Add _nf_(un)register_hooks symbols") and
Aaron Conole's patches to replace list_head with single linked list.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
nf_log is used by both nftables and iptables, so use XT_LOG_XXX macros
here is not appropriate. Replace them with NF_LOG_XXX.
Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
NFTA_LOG_FLAGS attribute is already supported, but the related
NF_LOG_XXX flags are not exposed to the userspace. So we cannot
explicitly enable log flags to log uid, tcp sequence, ip options
and so on, i.e. such rule "nft add rule filter output log uid"
is not supported yet.
So move NF_LOG_XXX macro definitions to the uapi/../nf_log.h. In
order to keep consistent with other modules, change NF_LOG_MASK to
refer to all supported log flags. On the other hand, add a new
NF_LOG_DEFAULT_MASK to refer to the original default log flags.
Finally, if user specify the unsupported log flags or NFTA_LOG_GROUP
and NFTA_LOG_FLAGS are set at the same time, report EINVAL to the
userspace.
Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Inverse ranges != [a,b] are not currently possible because rules are
composites of && operations, and we need to express this:
data < a || data > b
This patch adds a new range expression. Positive ranges can be already
through two cmp expressions:
cmp(sreg, data, >=)
cmp(sreg, data, <=)
This new range expression provides an alternative way to express this.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Fabian reports a possible conntrack memory leak (could not reproduce so
far), however, one minor issue can be easily resolved:
> cat /proc/net/nf_conntrack | wc -l = 5
> 4 minutes required to clean up the table.
We should not report those timed-out entries to the user in first place.
And instead of just skipping those timed-out entries while iterating over
the table we can also zap them (we already do this during ctnetlink
walks, but I forgot about the /proc interface).
Fixes: f330a7fdbe16 ("netfilter: conntrack: get rid of conntrack timer")
Reported-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Create a new revision for the hashlimit iptables extension module. Rev 2
will support higher pps of upto 1 million, Version 1 supports only 10k.
To support this we have to increase the size of the variables avg and
burst in hashlimit_cfg to 64-bit. Create two new structs hashlimit_cfg2
and xt_hashlimit_mtinfo2 and also create newer versions of all the
functions for match, checkentry and destroy.
Some of the functions like hashlimit_mt, hashlimit_mt_check etc are very
similar in both rev1 and rev2 with only minor changes, so I have split
those functions and moved all the common code to a *_common function.
Signed-off-by: Vishwanath Pai <vpai@akamai.com>
Signed-off-by: Joshua Hunt <johunt@akamai.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
I am planning to add a revision 2 for the hashlimit xtables module to
support higher packets per second rates. This patch renames all the
functions and variables related to revision 1 by adding _v1 at the
end of the names.
Signed-off-by: Vishwanath Pai <vpai@akamai.com>
Signed-off-by: Joshua Hunt <johunt@akamai.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
NFT_CT_MARK is unrelated to direction, so if NFTA_CT_DIRECTION attr is
specified, report EINVAL to the userspace. This validation check was
already done at nft_ct_get_init, but we missed it in nft_ct_set_init.
Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Currently, if the user want to match ct l3proto, we must specify the
direction, for example:
# nft add rule filter input ct original l3proto ipv4
^^^^^^^^
Otherwise, error message will be reported:
# nft add rule filter input ct l3proto ipv4
nft add rule filter input ct l3proto ipv4
<cmdline>:1:1-38: Error: Could not process rule: Invalid argument
add rule filter input ct l3proto ipv4
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Actually, there's no need to require NFTA_CT_DIRECTION attr, because
ct l3proto and protocol are unrelated to direction.
And for compatibility, even if the user specify the NFTA_CT_DIRECTION
attr, do not report error, just skip it.
Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
It is valid that the TCP RST packet which does not set ack flag, and bytes
of ack number are zero. But current seqadj codes would adjust the "0" ack
to invalid ack number. Actually seqadj need to check the ack flag before
adjust it for these RST packets.
The following is my test case
client is 10.26.98.245, and add one iptable rule:
iptables -I INPUT -p tcp --sport 12345 -m connbytes --connbytes 2:
--connbytes-dir reply --connbytes-mode packets -j REJECT --reject-with
tcp-reset
This iptables rule could generate on TCP RST without ack flag.
server:10.172.135.55
Enable the synproxy with seqadjust by the following iptables rules
iptables -t raw -A PREROUTING -i eth0 -p tcp -d 10.172.135.55 --dport 12345
-m tcp --syn -j CT --notrack
iptables -A INPUT -i eth0 -p tcp -d 10.172.135.55 --dport 12345 -m conntrack
--ctstate INVALID,UNTRACKED -j SYNPROXY --sack-perm --timestamp --wscale 7
--mss 1460
iptables -A OUTPUT -o eth0 -p tcp -s 10.172.135.55 --sport 12345 -m conntrack
--ctstate INVALID,UNTRACKED -m tcp --tcp-flags SYN,RST,ACK SYN,ACK -j ACCEPT
The following is my test result.
1. packet trace on client
root@routers:/tmp# tcpdump -i eth0 tcp port 12345 -n
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on eth0, link-type EN10MB (Ethernet), capture size 65535 bytes
IP 10.26.98.245.45154 > 10.172.135.55.12345: Flags [S], seq 3695959829,
win 29200, options [mss 1460,sackOK,TS val 452367884 ecr 0,nop,wscale 7],
length 0
IP 10.172.135.55.12345 > 10.26.98.245.45154: Flags [S.], seq 546723266,
ack 3695959830, win 0, options [mss 1460,sackOK,TS val 15643479 ecr 452367884,
nop,wscale 7], length 0
IP 10.26.98.245.45154 > 10.172.135.55.12345: Flags [.], ack 1, win 229,
options [nop,nop,TS val 452367885 ecr 15643479], length 0
IP 10.172.135.55.12345 > 10.26.98.245.45154: Flags [.], ack 1, win 226,
options [nop,nop,TS val 15643479 ecr 452367885], length 0
IP 10.26.98.245.45154 > 10.172.135.55.12345: Flags [R], seq 3695959830,
win 0, length 0
2. seqadj log on server
[62873.867319] Adjusting sequence number from 602341895->546723267,
ack from 3695959830->3695959830
[62873.867644] Adjusting sequence number from 602341895->546723267,
ack from 3695959830->3695959830
[62873.869040] Adjusting sequence number from 3695959830->3695959830,
ack from 0->55618628
To summarize, it is clear that the seqadj codes adjust the 0 ack when receive
one TCP RST packet without ack.
Signed-off-by: Gao Feng <fgao@ikuai8.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The netfilter hook list never uses the prev pointer, and so can be trimmed to
be a simple singly-linked list.
In addition to having a more light weight structure for hook traversal,
struct net becomes 5568 bytes (down from 6400) and struct net_device becomes
2176 bytes (down from 2240).
Signed-off-by: Aaron Conole <aconole@bytheb.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
This commit adds an upfront check for sane values to be passed when
registering a netfilter hook. This will be used in a future patch for a
simplified hook list traversal.
Signed-off-by: Aaron Conole <aconole@bytheb.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
All of the callers of nf_hook_slow already hold the rcu_read_lock, so this
cleanup removes the recursive call. This is just a cleanup, as the locking
code gracefully handles this situation.
Signed-off-by: Aaron Conole <aconole@bytheb.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
more readable
The origin codes perform two condition checks with dst_mtu(skb_dst(skb))
and in_mtu. And the last statement is "min(dst_mtu(skb_dst(skb)),
in_mtu) - minlen". It may let reader think about how about the result.
Would it be negative.
Now assign the result of min(dst_mtu(skb_dst(skb)), in_mtu) to a new
variable, then only perform one condition check, and it is more readable.
Signed-off-by: Gao Feng <fgao@ikuai8.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
|
|
We already checked for !found just a bit before:
if (!found) {
regs->verdict.code = NFT_BREAK;
return;
}
if (found && set->flags & NFT_SET_MAP)
^^^^^
So this redundant check can just go away.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
It's better to use sizeof(info->name)-1 as index to force set the string
tail instead of literal number '29'.
Signed-off-by: Gao Feng <fgao@ikuai8.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
There are some codes which are used to get one random once in netfilter.
We could use net_get_random_once to simplify these codes.
Signed-off-by: Gao Feng <fgao@ikuai8.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
pkt->xt.thoff is not always set properly, but we use it without any check.
For payload expr, it will cause wrong results. For nftrace, we may notify
the wrong network or transport header to the user space, furthermore,
input the following nft rules, warning message will be printed out:
# nft add rule arp filter output meta nftrace set 1
WARNING: CPU: 0 PID: 13428 at net/netfilter/nf_tables_trace.c:263
nft_trace_notify+0x4a3/0x5e0 [nf_tables]
Call Trace:
[<ffffffff813d58ae>] dump_stack+0x63/0x85
[<ffffffff810a4c0b>] __warn+0xcb/0xf0
[<ffffffff810a4d3d>] warn_slowpath_null+0x1d/0x20
[<ffffffffa0589703>] nft_trace_notify+0x4a3/0x5e0 [nf_tables]
[ ... ]
[<ffffffffa05690a8>] nft_do_chain_arp+0x78/0x90 [nf_tables_arp]
[<ffffffff816f4aa2>] nf_iterate+0x62/0x80
[<ffffffff816f4b33>] nf_hook_slow+0x73/0xd0
[<ffffffff81732bbf>] arp_xmit+0x8f/0xb0
[ ... ]
[<ffffffff81732d36>] arp_solicit+0x106/0x2c0
So before we use pkt->xt.thoff, check the tprot_set first.
Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
There's an off-by-one issue in nft_payload_fast_eval, skb_tail_pointer
and ptr + priv->len all point to the last valid address plus 1. So if
they are equal, we can still fetch the valid data. It's unnecessary to
fall back to nft_payload_eval.
Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Currently, the user can specify the queue numbers by _QUEUE_NUM and
_QUEUE_TOTAL attributes, this is enough in most situations.
But acctually, it is not very flexible, for example:
tcp dport 80 mapped to queue0
tcp dport 81 mapped to queue1
tcp dport 82 mapped to queue2
In order to do this thing, we must add 3 nft rules, and more
mapping meant more rules ...
So take one register to select the queue number, then we can add one
simple rule to mapping queues, maybe like this:
queue num tcp dport map { 80:0, 81:1, 82:2 ... }
Florian Westphal also proposed wider usage scenarios:
queue num jhash ip saddr . ip daddr mod ...
queue num meta cpu ...
queue num meta mark ...
The last point is how to load a queue number from sreg, although we can
use *(u16*)®s->data[reg] to load the queue number, just like nat expr
to load its l4port do.
But we will cooperate with hash expr, meta cpu, meta mark expr and so on.
They all store the result to u32 type, so cast it to u16 pointer and
dereference it will generate wrong result in the big endian system.
So just keep it simple, we treat queue number as u32 type, although u16
type is already enough.
Suggested-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Fetch value and validate u32 netlink attribute. This validation is
usually required when the u32 netlink attributes are being stored in a
field whose size is smaller.
This patch revisits 4da449ae1df9 ("netfilter: nft_exthdr: Add size check
on u8 nft_exthdr attributes").
Fixes: 96518518cc41 ("netfilter: add nftables")
Suggested-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Laura Garcia Liebana <nevola@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Add support of an offset value for incremental counter and random. With
this option the sysadmin is able to start the counter to a certain value
and then apply the generated number.
Example:
meta mark set numgen inc mod 2 offset 100
This will generate marks with the serie 100, 101, 100, 101, ...
Suggested-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Laura Garcia Liebana <nevola@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
To something more meaningful these days, specially because this is
working on packet headers or lengths and which are not tied to any CPU
arch but to the protocol itself.
So, WORD_TRUNC becomes SCTP_TRUNC4 and WORD_ROUND becomes SCTP_PAD4.
Reported-by: David Laight <David.Laight@ACULAB.COM>
Reported-by: David Miller <davem@davemloft.net>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add _nf_register_hooks() and _nf_unregister_hooks() calls which allow
caller to hold RTNL mutex.
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
CC: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When memory is exhausted, nfct_seqadj_ext_add may fail to add the
synproxy and seqadj extensions. The function nf_ct_seqadj_init doesn't
check if get valid seqadj pointer by the nfct_seqadj.
Now drop the packet directly when fail to add seqadj extension to
avoid dereference NULL pointer in nf_ct_seqadj_init from
init_conntrack().
Signed-off-by: Gao Feng <fgao@ikuai8.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The overflow validation in the init() function establishes that the
maximum value that the hash could reach is less than U32_MAX, which is
likely to be true.
The fix detects the overflow when the maximum hash value is less than
the offset itself.
Fixes: 70ca767ea1b2 ("netfilter: nft_hash: Add hash offset value")
Reported-by: Liping Zhang <liping.zhang@spreadtrum.com>
Signed-off-by: Laura Garcia Liebana <nevola@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Conflicts:
drivers/net/ethernet/mediatek/mtk_eth_soc.c
drivers/net/ethernet/qlogic/qed/qed_dcbx.c
drivers/net/phy/Kconfig
All conflicts were cases of overlapping commits.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
nf_nat_setup_info() returns NF_* verdicts, so convert them to error
codes that is what ctnelink expects. This has passed overlook without
having any impact since this nf_nat_setup_info() has always returned
NF_ACCEPT so far. Since 870190a9ec90 ("netfilter: nat: convert nat bysrc
hash to rhashtable"), this is problem.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
After we generate a new number, we still use the priv->counter and
store it to the dreg. This is not correct, another cpu may already
change it to a new number. So we must use the generated number, not
the priv->counter itself.
Fixes: 91dbc6be0a62 ("netfilter: nf_tables: add number generator expression")
Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
These counters sit in hot path and do show up in perf, this is especially
true for 'found' and 'searched' which get incremented for every packet
processed.
Information like
searched=212030105
new=623431
found=333613
delete=623327
does not seem too helpful nowadays:
- on busy systems found and searched will overflow every few hours
(these are 32bit integers), other more busy ones every few days.
- for debugging there are better methods, such as iptables' trace target,
the conntrack log sysctls. Nowadays we also have perf tool.
This removes packet path stat counters except those that
are expected to be 0 (or close to 0) on a normal system, e.g.
'insert_failed' (race happened) or 'invalid' (proto tracker rejects).
The insert stat is retained for the ctnetlink case.
The found stat is retained for the tuple-is-taken check when NAT has to
determine if it needs to pick a different source address.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
There are some codes of netfilter module which did not check the return
value of nft_register_chain_type. Add the checks now.
Signed-off-by: Gao Feng <fgao@ikuai8.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
There are some codes of netfilter module which did not check the return
value of register_netdevice_notifier. Add the checks now.
Signed-off-by: Gao Feng <fgao@ikuai8.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Instead of several goto's just to return the result, simply return it.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
These functions are extracted from the netdev family, they initialize
the pktinfo structure and validate that the IPv4 and IPv6 headers are
well-formed given that these functions are called from a path where
layer 3 sanitization did not happen yet.
These functions are placed in include/net/netfilter/nf_tables_ipv{4,6}.h
so they can be reused by a follow up patch to use them from the bridge
family too.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
This patch introduces nft_set_pktinfo_unspec() that ensures proper
initialization all of pktinfo fields for non-IP traffic. This is used
by the bridge, netdev and arp families.
This new function relies on nft_set_pktinfo_proto_unspec() to set a new
tprot_set field that indicates if transport protocol information is
available. Remain fields are zeroed.
The meta expression has been also updated to check to tprot_set in first
place given that zero is a valid tprot value. Even a handcrafted packet
may come with the IPPROTO_RAW (255) protocol number so we can't rely on
this value as tprot unset.
Reported-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The dynset expression matches if we can fit a new entry into the set.
If there is no room for it, then it breaks the rule evaluation.
This patch introduces the inversion flag so you can add rules to
explicitly drop packets that don't fit into the set. For example:
# nft filter input flow table xyz size 4 { ip saddr timeout 120s counter } overflow drop
This is useful to provide a replacement for connlimit.
For the rule above, every new entry uses the IPv4 address as key in the
set, this entry gets a timeout of 120 seconds that gets refresh on every
packet seen. If we get new flow and our set already contains 4 entries
already, then this packet is dropped.
You can already express this in positive logic, assuming default policy
to drop:
# nft filter input flow table xyz size 4 { ip saddr timeout 10s counter } accept
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Add support to pass through an offset to the hash value. With this
feature, the sysadmin is able to generate a hash with a given
offset value.
Example:
meta mark set jhash ip saddr mod 2 seed 0xabcd offset 100
This option generates marks according to the source address from 100 to
101.
Signed-off-by: Laura Garcia Liebana <nevola@gmail.com>
|
|
Although the validation of queues_total and queuenum is checked in nft
utility, but user can add nft rules via nfnetlink, so it is necessary
to check the validation at the nft_queue expr init routine too.
Tested by run ./nft-test.py any/queue.t:
any/queue.t: 6 unit tests, 0 error, 0 warning
Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Current parsing methods for SIP headers do not allow the presence of
tab characters between header name and header value. As a result Call-ID
SIP headers like the following are discarded by IPVS SIP persistence
engine:
"Call-ID\t: mycallid@abcde"
"Call-ID:\tmycallid@abcde"
In above examples Call-IDs are represented as strings in C language.
Obviously in real message we have byte "09" before/after colon (":").
Proposed fix is in nf_conntrack_sip module.
Function sip_skip_whitespace() should skip tabs in addition to spaces,
since in SIP grammar whitespace (WSP) corresponds to space or tab.
Below is an extract of relevant SIP ABNF syntax.
Call-ID = ( "Call-ID" / "i" ) HCOLON callid
callid = word [ "@" word ]
HCOLON = *( SP / HTAB ) ":" SWS
SWS = [LWS] ; sep whitespace
LWS = [*WSP CRLF] 1*WSP ; linear whitespace
WSP = SP / HTAB
word = 1*(alphanum / "-" / "." / "!" / "%" / "*" /
"_" / "+" / "`" / "'" / "~" /
"(" / ")" / "<" / ">" /
":" / "\" / DQUOTE /
"/" / "[" / "]" / "?" /
"{" / "}" )
Signed-off-by: Marco Angaroni <marcoangaroni@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
This is patch renames the existing function to nft_overquota() and make
it return a boolean that tells us if we have exceeded our byte quota.
Just a cleanup.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Use xor to decide to break further rule evaluation or not, since the
existing logic doesn't achieve the expected inversion.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The _until_ attribute is renamed to _modulus_ as the behaviour is similar to
other expresions with number limits (ex. nft_hash).
Renaming is possible because there isn't a kernel release yet with these
changes.
Signed-off-by: Laura Garcia Liebana <nevola@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
There are some debug code which are commented out in find_pattern by #if 0.
Now remove them.
Signed-off-by: Gao Feng <fgao@ikuai8.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The caller function "help" has already make sure the datalen could not be zero
before invoke find_pattern as a parameter by the following codes
if (dataoff >= skb->len) {
pr_debug("ftp: dataoff(%u) >= skblen(%u)\n", dataoff,
skb->len);
return NF_ACCEPT;
}
datalen = skb->len - dataoff;
And the latter codes "ends_in_nl = (fb_ptr[datalen - 1] == '\n');" use datalen
directly without checking if it is zero.
So it is unneccessary to check it in find_pattern too.
Signed-off-by: Gao Feng <fgao@ikuai8.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Current parsing methods for SIP header Call-ID do not check correctly all
characters allowed by RFC 3261. In particular "," character is allowed
instead of "'" character. As a result Call-ID headers like the following
are discarded by IPVS SIP persistence engine.
Call-ID: -.!%*_+`'~()<>:\"/[]?{}
Above example is composed using all non-alphanumeric characters listed
in RFC 3261 for Call-ID header syntax.
Proposed fix is in nf_conntrack_sip module; function iswordc() checks this
range: (c >= '(' && c <= '/') which includes these characters: ()*+,-./
They are all allowed except ",". Instead "'" is not included in the list.
Below is an extract of relevant SIP ABNF syntax.
Call-ID = ( "Call-ID" / "i" ) HCOLON callid
callid = word [ "@" word ]
HCOLON = *( SP / HTAB ) ":" SWS
SWS = [LWS] ; sep whitespace
LWS = [*WSP CRLF] 1*WSP ; linear whitespace
WSP = SP / HTAB
word = 1*(alphanum / "-" / "." / "!" / "%" / "*" /
"_" / "+" / "`" / "'" / "~" /
"(" / ")" / "<" / ">" /
":" / "\" / DQUOTE /
"/" / "[" / "]" / "?" /
"{" / "}" )
Signed-off-by: Marco Angaroni <marcoangaroni@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Current parsing methods for SIP headers do not properly manage
continuation lines: in case of Call-ID header the first character of
Call-ID header value is truncated. As a result IPVS SIP persistence
engine hashes over a call-id that is not exactly the one present in
the originale message.
Example: "Call-ID: \r\n abcdeABCDE1234"
results in extracted call-id equal to "bcdeABCDE1234".
In above example Call-ID is represented as a string in C language.
Obviously in real message the first bytes after colon (":") are
"20 0d 0a 20".
Proposed fix is in nf_conntrack_sip module.
Since sip_follow_continuation() function walks past the leading
spaces or tabs of the continuation line, sip_skip_whitespace()
should simply return the ouput of sip_follow_continuation().
Otherwise another iteration of the for loop is done and dptr
is incremented by one pointing to the second character of the
first word in the header.
Below is an extract of relevant SIP ABNF syntax.
Call-ID = ( "Call-ID" / "i" ) HCOLON callid
callid = word [ "@" word ]
HCOLON = *( SP / HTAB ) ":" SWS
SWS = [LWS] ; sep whitespace
LWS = [*WSP CRLF] 1*WSP ; linear whitespace
WSP = SP / HTAB
word = 1*(alphanum / "-" / "." / "!" / "%" / "*" /
"_" / "+" / "`" / "'" / "~" /
"(" / ")" / "<" / ">" /
":" / "\" / DQUOTE /
"/" / "[" / "]" / "?" /
"{" / "}" )
Signed-off-by: Marco Angaroni <marcoangaroni@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
ones defined by netfilter
There are two existing strutures which defines the GRE and PPTP header.
So use these two structures instead of the ones defined by netfilter to
keep consitent with other codes.
Signed-off-by: Gao Feng <fgao@ikuai8.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
netfilter.
There are already some GRE_* macros in kernel, so it is unnecessary
to define these macros. And remove some useless macros
Signed-off-by: Gao Feng <fgao@ikuai8.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following patchset contains Netfilter updates for your net-next
tree. Most relevant updates are the removal of per-conntrack timers to
use a workqueue/garbage collection approach instead from Florian
Westphal, the hash and numgen expression for nf_tables from Laura
Garcia, updates on nf_tables hash set to honor the NLM_F_EXCL flag,
removal of ip_conntrack sysctl and many other incremental updates on our
Netfilter codebase.
More specifically, they are:
1) Retrieve only 4 bytes to fetch ports in case of non-linear skb
transport area in dccp, sctp, tcp, udp and udplite protocol
conntrackers, from Gao Feng.
2) Missing whitespace on error message in physdev match, from Hangbin Liu.
3) Skip redundant IPv4 checksum calculation in nf_dup_ipv4, from Liping Zhang.
4) Add nf_ct_expires() helper function and use it, from Florian Westphal.
5) Replace opencoded nf_ct_kill() call in IPVS conntrack support, also
from Florian.
6) Rename nf_tables set implementation to nft_set_{name}.c
7) Introduce the hash expression to allow arbitrary hashing of selector
concatenations, from Laura Garcia Liebana.
8) Remove ip_conntrack sysctl backward compatibility code, this code has
been around for long time already, and we have two interfaces to do
this already: nf_conntrack sysctl and ctnetlink.
9) Use nf_conntrack_get_ht() helper function whenever possible, instead
of opencoding fetch of hashtable pointer and size, patch from Liping Zhang.
10) Add quota expression for nf_tables.
11) Add number generator expression for nf_tables, this supports
incremental and random generators that can be combined with maps,
very useful for load balancing purpose, again from Laura Garcia Liebana.
12) Fix a typo in a debug message in FTP conntrack helper, from Colin Ian King.
13) Introduce a nft_chain_parse_hook() helper function to parse chain hook
configuration, this is used by a follow up patch to perform better chain
update validation.
14) Add rhashtable_lookup_get_insert_key() to rhashtable and use it from the
nft_set_hash implementation to honor the NLM_F_EXCL flag.
15) Missing nulls check in nf_conntrack from nf_conntrack_tuple_taken(),
patch from Florian Westphal.
16) Don't use the DYING bit to know if the conntrack event has been already
delivered, instead a state variable to track event re-delivery
states, also from Florian.
17) Remove the per-conntrack timer, use the workqueue approach that was
discussed during the NFWS, from Florian Westphal.
18) Use the netlink conntrack table dump path to kill stale entries,
again from Florian.
19) Add a garbage collector to get rid of stale conntracks, from
Florian.
20) Reschedule garbage collector if eviction rate is high.
21) Get rid of the __nf_ct_kill_acct() helper.
22) Use ARPHRD_ETHER instead of hardcoded 1 from ARP logger.
23) Make nf_log_set() interface assertive on unsupported families.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
