summaryrefslogtreecommitdiff
path: root/net/sunrpc/xprtrdma/transport.c
AgeCommit message (Collapse)Author
2017-03-12xprtrdma: Disable pad optimization by defaultChuck Lever
commit c95a3c6b88658bcb8f77f85f31a0b9d9036e8016 upstream. Commit d5440e27d3e5 ("xprtrdma: Enable pad optimization") made the Linux client omit XDR round-up padding in normal Read and Write chunks so that the client doesn't have to register and invalidate 3-byte memory regions that contain no real data. Unfortunately, my cheery 2014 assessment that this optimization "is supported now by both Linux and Solaris servers" was premature. We've found bugs in Solaris in this area since commit d5440e27d3e5 ("xprtrdma: Enable pad optimization") was merged (SYMLINK is the main offender). So for maximum interoperability, I'm disabling this optimization again. If a CM private message is exchanged when connecting, the client recognizes that the server is Linux, and enables the optimization for that connection. Until now the Solaris server bugs did not impact common operations, and were thus largely benign. Soon, less capable devices on Linux NFS/RDMA clients will make use of Read chunks more often, and these Solaris bugs will prevent interoperation in more cases. Fixes: 677eb17e94ed ("xprtrdma: Fix XDR tail buffer marshalling") Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-19xprtrdma: Support larger inline thresholdsChuck Lever
The Version One default inline threshold is still 1KB. But allow testing with thresholds up to 64KB. This maximum is somewhat arbitrary. There's no fundamental architectural limit I'm aware of, but it's good to keep the size of Receive buffers reasonable. Now that Send can use a s/g list, a Send buffer is only as large as each RPC requires. Receive buffers are always the size of the inline threshold, however. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-09-19xprtrdma: Use gathered Send for large inline messagesChuck Lever
An RPC Call message that is sent inline but that has a data payload (ie, one or more items in rq_snd_buf's page list) must be "pulled up:" - call_allocate has to reserve enough RPC Call buffer space to accommodate the data payload - call_transmit has to memcopy the rq_snd_buf's page list and tail into its head iovec before it is sent As the inline threshold is increased beyond its current 1KB default, however, this means data payloads of more than a few KB are copied by the host CPU. For example, if the inline threshold is increased just to 4KB, then NFS WRITE requests up to 4KB would involve a memcpy of the NFS WRITE's payload data into the RPC Call buffer. This is an undesirable amount of participation by the host CPU. The inline threshold may be much larger than 4KB in the future, after negotiation with a peer server. Instead of copying the components of rq_snd_buf into its head iovec, construct a gather list of these components, and send them all in place. The same approach is already used in the Linux server's RPC-over-RDMA reply path. This mechanism also eliminates the need for rpcrdma_tail_pullup, which is used to manage the XDR pad and trailing inline content when a Read list is present. This requires that the pages in rq_snd_buf's page list be DMA-mapped during marshaling, and unmapped when a data-bearing RPC is completed. This is slightly less efficient for very small I/O payloads, but significantly more efficient as data payload size and inline threshold increase past a kilobyte. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-09-19xprtrdma: Basic support for Remote InvalidationChuck Lever
Have frwr's ro_unmap_sync recognize an invalidated rkey that appears as part of a Receive completion. Local invalidation can be skipped for that rkey. Use an out-of-band signaling mechanism to indicate to the server that the client is prepared to receive RDMA Send With Invalidate. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-09-19xprtrdma: Eliminate "ia" argument in rpcrdma_{alloc, free}_regbufChuck Lever
Clean up. The "ia" argument is no longer used. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-09-19xprtrdma: Replace DMA_BIDIRECTIONALChuck Lever
The use of DMA_BIDIRECTIONAL is discouraged by DMA-API.txt. Fortunately, xprtrdma now knows which direction I/O is going as soon as it allocates each regbuf. The RPC Call and Reply buffers are no longer the same regbuf. They can each be labeled correctly now. The RPC Reply buffer is never part of either a Send or Receive WR, but it can be part of Reply chunk, which is mapped and registered via ->ro_map . So it is not DMA mapped when it is allocated (DMA_NONE), to avoid a double- mapping. Since Receive buffers are no longer DMA_BIDIRECTIONAL and their contents are never modified by the host CPU, DMA-API-HOWTO.txt suggests that a DMA sync before posting each buffer should be unnecessary. (See my_card_interrupt_handler). Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-09-19xprtrdma: Use smaller buffers for RPC-over-RDMA headersChuck Lever
Commit 949317464bc2 ("xprtrdma: Limit number of RDMA segments in RPC-over-RDMA headers") capped the number of chunks that may appear in RPC-over-RDMA headers. The maximum header size can be estimated and fixed to avoid allocating buffer space that is never used. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-09-19xprtrdma: Initialize separate RPC call and reply buffersChuck Lever
RPC-over-RDMA needs to separate its RPC call and reply buffers. o When an RPC Call is sent, rq_snd_buf is DMA mapped for an RDMA Send operation using DMA_TO_DEVICE o If the client expects a large RPC reply, it DMA maps rq_rcv_buf as part of a Reply chunk using DMA_FROM_DEVICE The two mappings are for data movement in opposite directions. DMA-API.txt suggests that if these mappings share a DMA cacheline, bad things can happen. This could occur in the final bytes of rq_snd_buf and the first bytes of rq_rcv_buf if the two buffers happen to share a DMA cacheline. On x86_64 the cacheline size is typically 8 bytes, and RPC call messages are usually much smaller than the send buffer, so this hasn't been a noticeable problem. But the DMA cacheline size can be larger on other platforms. Also, often rq_rcv_buf starts most of the way into a page, thus an additional RDMA segment is needed to map and register the end of that buffer. Try to avoid that scenario to reduce the cost of registering and invalidating Reply chunks. Instead of carrying a single regbuf that covers both rq_snd_buf and rq_rcv_buf, each struct rpcrdma_req now carries one regbuf for rq_snd_buf and one regbuf for rq_rcv_buf. Some incidental changes worth noting: - To clear out some spaghetti, refactor xprt_rdma_allocate. - The value stored in rg_size is the same as the value stored in the iov.length field, so eliminate rg_size Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-09-19SUNRPC: Add a transport-specific private field in rpc_rqstChuck Lever
Currently there's a hidden and indirect mechanism for finding the rpcrdma_req that goes with an rpc_rqst. It depends on getting from the rq_buffer pointer in struct rpc_rqst to the struct rpcrdma_regbuf that controls that buffer, and then to the struct rpcrdma_req it goes with. This was done back in the day to avoid the need to add a per-rqst pointer or to alter the buf_free API when support for RPC-over-RDMA was introduced. I'm about to change the way regbuf's work to support larger inline thresholds. Now is a good time to replace this indirect mechanism with something that is more straightforward. I guess this should be considered a clean up. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-09-19SUNRPC: Separate buffer pointers for RPC Call and Reply messagesChuck Lever
For xprtrdma, the RPC Call and Reply buffers are involved in real I/O operations. To start with, the DMA direction of the I/O for a Call is opposite that of a Reply. In the current arrangement, the Reply buffer address is on a four-byte alignment just past the call buffer. Would be friendlier on some platforms if that was at a DMA cache alignment instead. Because the current arrangement allocates a single memory region which contains both buffers, the RPC Reply buffer often contains a page boundary in it when the Call buffer is large enough (which is frequent). It would be a little nicer for setting up DMA operations (and possible registration of the Reply buffer) if the two buffers were separated, well-aligned, and contained as few page boundaries as possible. Now, I could just pad out the single memory region used for the pair of buffers. But frequently that would mean a lot of unused space to ensure the Reply buffer did not have a page boundary. Add a separate pointer to rpc_rqst that points right to the RPC Reply buffer. This makes no difference to xprtsock, but it will help xprtrdma in subsequent patches. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-09-19SUNRPC: Generalize the RPC buffer release APIChuck Lever
xprtrdma needs to allocate the Call and Reply buffers separately. TBH, the reliance on using a single buffer for the pair of XDR buffers is transport implementation-specific. Instead of passing just the rq_buffer into the buf_free method, pass the task structure and let buf_free take care of freeing both XDR buffers at once. There's a micro-optimization here. In the common case, both xprt_release and the transport's buf_free method were checking if rq_buffer was NULL. Now the check is done only once per RPC. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-09-19SUNRPC: Generalize the RPC buffer allocation APIChuck Lever
xprtrdma needs to allocate the Call and Reply buffers separately. TBH, the reliance on using a single buffer for the pair of XDR buffers is transport implementation-specific. Transports that want to allocate separate Call and Reply buffers will ignore the "size" argument anyway. Don't bother passing it. The buf_alloc method can't return two pointers. Instead, make the method's return value an error code, and set the rq_buffer pointer in the method itself. This gives call_allocate an opportunity to terminate an RPC instead of looping forever when a permanent problem occurs. If a request is just bogus, or the transport is in a state where it can't allocate resources for any request, there needs to be a way to kill the RPC right there and not loop. This immediately fixes a rare problem in the backchannel send path, which loops if the server happens to send a CB request whose call+reply size is larger than a page (which it shouldn't do yet). One more issue: looks like xprt_inject_disconnect was incorrectly placed in the failure path in call_allocate. It needs to be in the success path, as it is for other call-sites. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-09-19xprtrdma: Eliminate INLINE_THRESHOLD macrosChuck Lever
Clean up: r_xprt is already available everywhere these macros are invoked, so just dereference that directly. RPCRDMA_INLINE_PAD_VALUE is no longer used, so it can simply be removed. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-07-11xprtrdma: Place registered MWs on a per-req listChuck Lever
Instead of placing registered MWs sparsely into the rl_segments array, place these MWs on a per-req list. ro_unmap_{sync,safe} can then simply pull those MWs off the list instead of walking through the array. This change significantly reduces the size of struct rpcrdma_req by removing nsegs and rl_mw from every array element. As an additional clean-up, chunk co-ordinates are returned in the "*mw" output argument so they are no longer needed in every array element. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Tested-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-07-11xprtrdma: Allocate MRs on demandChuck Lever
Frequent MR list exhaustion can impact I/O throughput, so enough MRs are always created during transport set-up to prevent running out. This means more MRs are created than most workloads need. Commit 94f58c58c0b4 ("xprtrdma: Allow Read list and Reply chunk simultaneously") introduced support for sending two chunk lists per RPC, which consumes more MRs per RPC. Instead of trying to provision more MRs, introduce a mechanism for allocating MRs on demand. A few MRs are allocated during transport set-up to kick things off. This significantly reduces the average number of MRs per transport while allowing the MR count to grow for workloads or devices that need more MRs. FRWR with mlx4 allocated almost 400 MRs per transport before this patch. Now it starts with 32. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Tested-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-07-11xprtrdma: Honor ->send_request API contractChuck Lever
Commit c93c62231cf5 ("xprtrdma: Disconnect on registration failure") added a disconnect for some RPC marshaling failures. This is needed only in a handful of cases, but it was triggering for simple stuff like temporary resource shortages. Try to straighten this out. Fix up the lower layers so they don't return -ENOMEM or other error codes that the RPC client's FSM doesn't explicitly recognize. Also fix up the places in the send_request path that do want a disconnect. For example, when ib_post_send or ib_post_recv fail, this is a sign that there is a send or receive queue resource miscalculation. That should be rare, and is a sign of a software bug. But xprtrdma can recover: disconnect to reset the transport and start over. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Tested-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-07-11xprtrdma: Refactor MR recovery work queuesChuck Lever
I found that commit ead3f26e359e ("xprtrdma: Add ro_unmap_safe memreg method"), which introduces ro_unmap_safe, never wired up the FMR recovery worker. The FMR and FRWR recovery work queues both do the same thing. Instead of setting up separate individual work queues for this, schedule a delayed worker to deal with them, since recovering MRs is not performance-critical. Fixes: ead3f26e359e ("xprtrdma: Add ro_unmap_safe memreg method") Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Tested-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-05-17xprtrdma: Add ro_unmap_safe memreg methodChuck Lever
There needs to be a safe method of releasing registered memory resources when an RPC terminates. Safe can mean a number of things: + Doesn't have to sleep + Doesn't rely on having a QP in RTS ro_unmap_safe will be that safe method. It can be used in cases where synchronous memory invalidation can deadlock, or needs to have an active QP. The important case is fencing an RPC's memory regions after it is signaled (^C) and before it exits. If this is not done, there is a window where the server can write an RPC reply into memory that the client has released and re-used for some other purpose. Note that this is a full solution for FRWR, but FMR and physical still have some gaps where a particularly bad server can wreak some havoc on the client. These gaps are not made worse by this patch and are expected to be exceptionally rare and timing-based. They are noted in documenting comments. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Tested-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-05-17xprtrdma: Bound the inline threshold valuesChuck Lever
Currently the sysctls that allow setting the inline threshold allow any value to be set. Small values only make the transport run slower. The default 1KB setting is as low as is reasonable. And the logic that decides how to divide a Send buffer between RPC-over-RDMA header and RPC message assumes (but does not check) that the lower bound is not crazy (say, 57 bytes). Send and receive buffers share a page with some control information. Values larger than about 3KB can't be supported, currently. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Tested-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-05-17sunrpc: Advertise maximum backchannel payload sizeChuck Lever
RPC-over-RDMA transports have a limit on how large a backward direction (backchannel) RPC message can be. Ensure that the NFSv4.x CREATE_SESSION operation advertises this limit to servers. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Tested-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-01-24Merge tag 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma Pull rdma updates from Doug Ledford: "Initial roundup of 4.5 merge window patches - Remove usage of ib_query_device and instead store attributes in ib_device struct - Move iopoll out of block and into lib, rename to irqpoll, and use in several places in the rdma stack as our new completion queue polling library mechanism. Update the other block drivers that already used iopoll to use the new mechanism too. - Replace the per-entry GID table locks with a single GID table lock - IPoIB multicast cleanup - Cleanups to the IB MR facility - Add support for 64bit extended IB counters - Fix for netlink oops while parsing RDMA nl messages - RoCEv2 support for the core IB code - mlx4 RoCEv2 support - mlx5 RoCEv2 support - Cross Channel support for mlx5 - Timestamp support for mlx5 - Atomic support for mlx5 - Raw QP support for mlx5 - MAINTAINERS update for mlx4/mlx5 - Misc ocrdma, qib, nes, usNIC, cxgb3, cxgb4, mlx4, mlx5 updates - Add support for remote invalidate to the iSER driver (pushed through the RDMA tree due to dependencies, acknowledged by nab) - Update to NFSoRDMA (pushed through the RDMA tree due to dependencies, acknowledged by Bruce)" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (169 commits) IB/mlx5: Unify CQ create flags check IB/mlx5: Expose Raw Packet QP to user space consumers {IB, net}/mlx5: Move the modify QP operation table to mlx5_ib IB/mlx5: Support setting Ethernet priority for Raw Packet QPs IB/mlx5: Add Raw Packet QP query functionality IB/mlx5: Add create and destroy functionality for Raw Packet QP IB/mlx5: Refactor mlx5_ib_qp to accommodate other QP types IB/mlx5: Allocate a Transport Domain for each ucontext net/mlx5_core: Warn on unsupported events of QP/RQ/SQ net/mlx5_core: Add RQ and SQ event handling net/mlx5_core: Export transport objects IB/mlx5: Expose CQE version to user-space IB/mlx5: Add CQE version 1 support to user QPs and SRQs IB/mlx5: Fix data validation in mlx5_ib_alloc_ucontext IB/sa: Fix netlink local service GFP crash IB/srpt: Remove redundant wc array IB/qib: Improve ipoib UD performance IB/mlx4: Advertise RoCE v2 support IB/mlx4: Create and use another QP1 for RoCEv2 IB/mlx4: Enable send of RoCE QP1 packets with IP/UDP headers ...
2016-01-19svcrdma: Add class for RDMA backwards direction transportChuck Lever
To support the server-side of an NFSv4.1 backchannel on RDMA connections, add a transport class that enables backward direction messages on an existing forward channel connection. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Acked-by: Bruce Fields <bfields@fieldses.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-12-18xprtrdma: xprt_rdma_free() must not release backchannel reqsChuck Lever
Preserve any rpcrdma_req that is attached to rpc_rqst's allocated for the backchannel. Otherwise, after all the pre-allocated backchannel req's are consumed, incoming backward calls start writing on freed memory. Somehow this hunk got lost. Fixes: f531a5dbc451 ('xprtrdma: Pre-allocate backward rpc_rqst') Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Tested-by: Devesh Sharma <devesh.sharma@avagotech.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-11-02NFS: Enable client side NFSv4.1 backchannel to use other transportsChuck Lever
Forechannel transports get their own "bc_up" method to create an endpoint for the backchannel service. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> [Anna Schumaker: Add forward declaration of struct net to xprt.h] Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-11-02xprtrdma: Pre-allocate backward rpc_rqst and send/receive buffersChuck Lever
xprtrdma's backward direction send and receive buffers are the same size as the forechannel's inline threshold, and must be pre- registered. The consumer has no control over which receive buffer the adapter chooses to catch an incoming backwards-direction call. Any receive buffer can be used for either a forward reply or a backward call. Thus both types of RPC message must all be the same size. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Tested-By: Devesh Sharma <devesh.sharma@avagotech.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-11-02xprtrdma: Use workqueue to process RPC/RDMA repliesChuck Lever
The reply tasklet is fast, but it's single threaded. After reply traffic saturates a single CPU, there's no more reply processing capacity. Replace the tasklet with a workqueue to spread reply handling across all CPUs. This also moves RPC/RDMA reply handling out of the soft IRQ context and into a context that allows sleeps. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Tested-By: Devesh Sharma <devesh.sharma@avagotech.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-11-02xprtrdma: Enable swap-on-NFS/RDMAChuck Lever
After adding a swapfile on an NFS/RDMA mount and removing the normal swap partition, I was able to push the NFS client well into swap without any issue. I forgot to swapoff the NFS file before rebooting. This pinned the NFS mount and the IB core and provider, causing shutdown to hang. I think this is expected and safe behavior. Probably shutdown scripts should "swapoff -a" before unmounting any filesystems. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Tested-By: Devesh Sharma <devesh.sharma@avagotech.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-09-28xprtrdma: disconnect and flush cqs before freeing buffersSteve Wise
Otherwise a FRMR completion can cause a touch-after-free crash. In xprt_rdma_destroy(), call rpcrdma_buffer_destroy() only after calling rpcrdma_ep_destroy(). In rpcrdma_ep_destroy(), disconnect the cm_id first which should flush the qp, then drain the cqs, then destroy the qp, and finally destroy the cqs. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Tested-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-08-05xprtrdma: Count RDMA_NOMSG type callsChuck Lever
RDMA_NOMSG type calls are less efficient than RDMA_MSG. Count NOMSG calls so administrators can tell if they happen to be used more than expected. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Tested-by: Devesh Sharma <devesh.sharma@avagotech.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-08-05xprtrdma: Clean up xprt_rdma_print_stats()Chuck Lever
checkpatch.pl complained about the seq_printf() format string split across lines and the use of %Lu. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Tested-by: Devesh Sharma <devesh.sharma@avagotech.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-08-05xprtrdma: Make xprt_setup_rdma() agnostic to family of server addressChuck Lever
In particular, recognize when an IPv6 connection is bound. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Tested-by: Devesh Sharma <devesh.sharma@avagotech.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-07-02Merge tag 'nfs-for-4.2-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds
Pull NFS client updates from Trond Myklebust: "Highlights include: Stable patches: - Fix a crash in the NFSv4 file locking code. - Fix an fsync() regression, where we were failing to retry I/O in some circumstances. - Fix an infinite loop in NFSv4.0 OPEN stateid recovery - Fix a memory leak when an attempted pnfs fails. - Fix a memory leak in the backchannel code - Large hostnames were not supported correctly in NFSv4.1 - Fix a pNFS/flexfiles bug that was impeding error reporting on I/O. - Fix a couple of credential issues in pNFS/flexfiles Bugfixes + cleanups: - Open flag sanity checks in the NFSv4 atomic open codepath - More NFSv4 delegation related bugfixes - Various NFSv4.1 backchannel bugfixes and cleanups - Fix the NFS swap socket code - Various cleanups of the NFSv4 SETCLIENTID and EXCHANGE_ID code - Fix a UDP transport deadlock issue Features: - More RDMA client transport improvements - NFSv4.2 LAYOUTSTATS functionality for pnfs flexfiles" * tag 'nfs-for-4.2-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (87 commits) nfs: Remove invalid tk_pid from debug message nfs: Remove invalid NFS_ATTR_FATTR_V4_REFERRAL checking in nfs4_get_rootfh nfs: Drop bad comment in nfs41_walk_client_list() nfs: Remove unneeded micro checking of CONFIG_PROC_FS nfs: Don't setting FILE_CREATED flags always nfs: Use remove_proc_subtree() instead remove_proc_entry() nfs: Remove unused argument in nfs_server_set_fsinfo() nfs: Fix a memory leak when meeting an unsupported state protect nfs: take extra reference to fl->fl_file when running a LOCKU operation NFSv4: When returning a delegation, don't reclaim an incompatible open mode. NFSv4.2: LAYOUTSTATS is optional to implement NFSv4.2: Fix up a decoding error in layoutstats pNFS/flexfiles: Fix the reset of struct pgio_header when resending pNFS/flexfiles: Turn off layoutcommit for servers that don't need it pnfs/flexfiles: protect ktime manipulation with mirror lock nfs: provide pnfs_report_layoutstat when NFS42 is disabled nfs: verify open flags before allowing open nfs: always update creds in mirror, even when we have an already connected ds nfs: fix potential credential leak in ff_layout_update_mirror_cred pnfs/flexfiles: report layoutstat regularly ...
2015-06-16Merge tag 'nfs-rdma-for-4.2' of git://git.linux-nfs.org/projects/anna/nfs-rdmaTrond Myklebust
NFS: NFSoRDMA Client Changes These patches continue to build up for improving the rsize and wsize that the NFS client uses when talking over RDMA. In addition, these patches also add in scalability enhancements and other bugfixes. Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> * tag 'nfs-rdma-for-4.2' of git://git.linux-nfs.org/projects/anna/nfs-rdma: (142 commits) xprtrdma: Reduce per-transport MR allocation xprtrdma: Stack relief in fmr_op_map() xprtrdma: Split rb_lock xprtrdma: Remove rpcrdma_ia::ri_memreg_strategy xprtrdma: Remove ->ro_reset xprtrdma: Remove unused LOCAL_INV recovery logic xprtrdma: Acquire MRs in rpcrdma_register_external() xprtrdma: Introduce an FRMR recovery workqueue xprtrdma: Acquire FMRs in rpcrdma_fmr_register_external() xprtrdma: Introduce helpers for allocating MWs xprtrdma: Use ib_device pointer safely xprtrdma: Remove rr_func xprtrdma: Replace rpcrdma_rep::rr_buffer with rr_rxprt xprtrdma: Warn when there are orphaned IB objects ...
2015-06-12xprtrdma: Introduce an FRMR recovery workqueueChuck Lever
After a transport disconnect, FRMRs can be left in an undetermined state. In particular, the MR's rkey is no good. Currently, FRMRs are fixed up by the transport connect worker, but that can race with ->ro_unmap if an RPC happens to exit while the transport connect worker is running. A better way of dealing with broken FRMRs is to detect them before they are re-used by ->ro_map. Such FRMRs are either already invalid or are owned by the sending RPC, and thus no race with ->ro_unmap is possible. Introduce a mechanism for handing broken FRMRs to a workqueue to be reset in a context that is appropriate for allocating resources (ie. an ib_alloc_fast_reg_mr() API call). This mechanism is not yet used, but will be in subsequent patches. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Reviewed-By: Devesh Sharma <devesh.sharma@avagotech.com> Tested-By: Devesh Sharma <devesh.sharma@avagotech.com> Reviewed-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-06-12xprtrdma: Remove rr_funcChuck Lever
A posted rpcrdma_rep never has rr_func set to anything but rpcrdma_reply_handler. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Tested-By: Devesh Sharma <devesh.sharma@avagotech.com> Reviewed-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-06-12xprtrdma: Replace rpcrdma_rep::rr_buffer with rr_rxprtChuck Lever
Clean up: Instead of carrying a pointer to the buffer pool and the rpc_xprt, carry a pointer to the controlling rpcrdma_xprt. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Tested-By: Devesh Sharma <devesh.sharma@avagotech.com> Reviewed-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-06-10SUNRPC: Transport fault injectionChuck Lever
It has been exceptionally useful to exercise the logic that handles local immediate errors and RDMA connection loss. To enable developers to test this regularly and repeatably, add logic to simulate connection loss every so often. Fault injection is disabled by default. It is enabled with $ sudo echo xxx > /sys/kernel/debug/sunrpc/inject_fault/disconnect where "xxx" is a large positive number of transport method calls before a disconnect. A value of several thousand is usually a good number that allows reasonable forward progress while still causing a lot of connection drops. These hooks are disabled when SUNRPC_DEBUG is turned off. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-06-10sunrpc: turn swapper_enable/disable functions into rpc_xprt_opsJeff Layton
RDMA xprts don't have a sock_xprt, but an rdma_xprt, so the xs_swapper_enable/disable functions will likely oops when fed an RDMA xprt. Turn these functions into rpc_xprt_ops so that that doesn't occur. For now the RDMA versions are no-ops that just return -EINVAL on an attempt to swapon. Cc: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Reviewed-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-06-04rpcrdma: Merge svcrdma and xprtrdma modules into oneChuck Lever
Bi-directional RPC support means code in svcrdma.ko invokes a bit of code in xprtrdma.ko, and vice versa. To avoid loader/linker loops, merge the server and client side modules together into a single module. When backchannel capabilities are added, the combined module will register all needed transport capabilities so that Upper Layer consumers automatically have everything needed to create a bi-directional transport connection. Module aliases are added for backwards compatibility with user space, which still may expect svcrdma.ko or xprtrdma.ko to be present. This commit reverts commit 2e8c12e1b765 ("xprtrdma: add separate Kconfig options for NFSoRDMA client and server support") and provides a single CONFIG option for enabling the new module. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2015-03-31xprtrdma: Add a "deregister_external" op for each memreg modeChuck Lever
There is very little common processing among the different external memory deregistration functions. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Tested-by: Devesh Sharma <Devesh.Sharma@Emulex.Com> Tested-by: Meghana Cheripady <Meghana.Cheripady@Emulex.Com> Tested-by: Veeresh U. Kokatnur <veereshuk@chelsio.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-03-31xprtrdma: Add a "max_payload" op for each memreg modeChuck Lever
The max_payload computation is generalized to ensure that the payload maximum is the lesser of RPC_MAX_DATA_SEGS and the number of data segments that can be transmitted in an inline buffer. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Tested-by: Devesh Sharma <Devesh.Sharma@Emulex.Com> Tested-by: Meghana Cheripady <Meghana.Cheripady@Emulex.Com> Tested-by: Veeresh U. Kokatnur <veereshuk@chelsio.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-03-31xprtrdma: Perform a full marshal on retransmitChuck Lever
Commit 6ab59945f292 ("xprtrdma: Update rkeys after transport reconnect" added logic in the ->send_request path to update the chunk list when an RPC/RDMA request is retransmitted. Note that rpc_xdr_encode() resets and re-encodes the entire RPC send buffer for each retransmit of an RPC. The RPC send buffer is not preserved from the previous transmission of an RPC. Revert 6ab59945f292, and instead, just force each request to be fully marshaled every time through ->send_request. This should preserve the fix from 6ab59945f292, while also performing pullup during retransmits. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Acked-by: Sagi Grimberg <sagig@mellanox.com> Tested-by: Devesh Sharma <Devesh.Sharma@Emulex.Com> Tested-by: Meghana Cheripady <Meghana.Cheripady@Emulex.Com> Tested-by: Veeresh U. Kokatnur <veereshuk@chelsio.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-03-31xprtrdma: Display IPv6 addresses and port numbers correctlyChuck Lever
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Tested-by: Devesh Sharma <Devesh.Sharma@Emulex.Com> Tested-by: Meghana Cheripady <Meghana.Cheripady@Emulex.Com> Tested-by: Veeresh U. Kokatnur <veereshuk@chelsio.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-01-30xprtrdma: Update the GFP flags used in xprt_rdma_allocate()Chuck Lever
Reflect the more conservative approach used in the socket transport's version of this transport method. An RPC buffer allocation should avoid forcing not just FS activity, but any I/O. In particular, two recent changes missed updating xprtrdma: - Commit c6c8fe79a83e ("net, sunrpc: suppress allocation warning ...") - Commit a564b8f03986 ("nfs: enable swap on NFS") Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-01-30xprtrdma: Allocate RPC/RDMA send buffer separately from struct rpcrdma_reqChuck Lever
The rl_base field is currently the buffer where each RPC/RDMA call header is built. The inline threshold is an agreed-on size limit to for RDMA SEND operations that pass between client and server. The sum of the RPC/RDMA header size and the RPC header size must be less than or equal to this threshold. Increasing the r/wsize maximum will require MAX_SEGS to grow significantly, but the inline threshold size won't change (both sides agree on it). The server's inline threshold doesn't change. Since an RPC/RDMA header can never be larger than the inline threshold, make all RPC/RDMA header buffers the size of the inline threshold. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-01-30xprtrdma: Allocate RPC send buffer separately from struct rpcrdma_reqChuck Lever
Because internal memory registration is an expensive and synchronous operation, xprtrdma pre-registers send and receive buffers at mount time, and then re-uses them for each RPC. A "hardway" allocation is a memory allocation and registration that replaces a send buffer during the processing of an RPC. Hardway must be done if the RPC send buffer is too small to accommodate an RPC's call and reply headers. For xprtrdma, each RPC send buffer is currently part of struct rpcrdma_req so that xprt_rdma_free(), which is passed nothing but the address of an RPC send buffer, can find its matching struct rpcrdma_req and rpcrdma_rep quickly via container_of / offsetof. That means that hardway currently has to replace a whole rpcrmda_req when it replaces an RPC send buffer. This is often a fairly hefty chunk of contiguous memory due to the size of the rl_segments array and the fact that both the send and receive buffers are part of struct rpcrdma_req. Some obscure re-use of fields in rpcrdma_req is done so that xprt_rdma_free() can detect replaced rpcrdma_req structs, and restore the original. This commit breaks apart the RPC send buffer and struct rpcrdma_req so that increasing the size of the rl_segments array does not change the alignment of each RPC send buffer. (Increasing rl_segments is needed to bump up the maximum r/wsize for NFS/RDMA). This change opens up some interesting possibilities for improving the design of xprt_rdma_allocate(). xprt_rdma_allocate() is now the one place where RPC send buffers are allocated or re-allocated, and they are now always left in place by xprt_rdma_free(). A large re-allocation that includes both the rl_segments array and the RPC send buffer is no longer needed. Send buffer re-allocation becomes quite rare. Good send buffer alignment is guaranteed no matter what the size of the rl_segments array is. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-01-30xprtrdma: Simplify synopsis of rpcrdma_buffer_create()Chuck Lever
Clean up: There is one call site for rpcrdma_buffer_create(). All of the arguments there are fields of an rpcrdma_xprt. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-01-30xprtrdma: Remove rpcrdma_ep::rep_func and ::rep_xprtChuck Lever
Clean up: The rep_func field always refers to rpcrdma_conn_func(). rep_func should have been removed by commit b45ccfd25d50 ("xprtrdma: Remove MEMWINDOWS registration modes"). Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-01-30xprtrdma: Rename "xprt" and "rdma_connect" fields in struct rpcrdma_xprtChuck Lever
Clean up: Use consistent field names in struct rpcrdma_xprt. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2014-11-26Merge tag 'nfs-rdma-for-3.19' of ↵Trond Myklebust
git://git.linux-nfs.org/projects/anna/nfs-rdma into linux-next Pull NFS client RDMA changes for 3.19 from Anna Schumaker: "NFS: Client side changes for RDMA These patches various bugfixes and cleanups for using NFS over RDMA, including better error handling and performance improvements by using pad optimization. Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>" * tag 'nfs-rdma-for-3.19' of git://git.linux-nfs.org/projects/anna/nfs-rdma: xprtrdma: Display async errors xprtrdma: Enable pad optimization xprtrdma: Re-write rpcrdma_flush_cqs() xprtrdma: Refactor tasklet scheduling xprtrdma: unmap all FMRs during transport disconnect xprtrdma: Cap req_cqinit xprtrdma: Return an errno from rpcrdma_register_external()