summaryrefslogtreecommitdiff
path: root/net/wireless
AgeCommit message (Collapse)Author
2014-02-06cfg80211: send scan results from work queueJohannes Berg
Due to the previous commit, when a scan finishes, it is in theory possible to hit the following sequence: 1. interface starts being removed 2. scan is cancelled by driver and cfg80211 is notified 3. scan done work is scheduled 4. interface is removed completely, rdev->scan_req is freed, event sent to userspace but scan done work remains pending 5. new scan is requested on another virtual interface 6. scan done work runs, freeing the still-running scan To fix this situation, hang on to the scan done message and block new scans while that is the case, and only send the message from the work function, regardless of whether the scan_req is already freed from interface removal. This makes step 5 above impossible and changes step 6 to be 5. scan done work runs, sending the scan done message As this can't work for wext, so we send the message immediately, but this shouldn't be an issue since we still return -EBUSY. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-06cfg80211: fix scan done raceJohannes Berg
When an interface/wdev is removed, any ongoing scan should be cancelled by the driver. This will make it call cfg80211, which only queues a work struct. If interface/wdev removal is quick enough, this can leave the scan request pending and processed only after the interface is gone, causing a use-after-free. Fix this by making sure the scan request is not pending after the interface is destroyed. We can't flush or cancel the work item due to locking concerns, but when it'll run it shouldn't find anything to do. This leaves a potential issue, if a new scan gets requested before the work runs, it prematurely stops the running scan, potentially causing another crash. I'll fix that in the next patch. This was particularly observed with P2P_DEVICE wdevs, likely because freeing them is quicker than freeing netdevs. Reported-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Fixes: 4a58e7c38443 ("cfg80211: don't "leak" uncompleted scans") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-06cfg80211: re-enable 5/10 MHz supportJohannes Berg
Unfortunately I forgot this during the merge window, but the patch seems small enough to go in as a fix. The userspace API bug that was the reason for disabling it has long been fixed. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-02-06nl80211: Reset split_start when netlink skb is exhaustedPontus Fuchs
When the netlink skb is exhausted split_start is left set. In the subsequent retry, with a larger buffer, the dump is continued from the failing point instead of from the beginning. This was causing my rt28xx based USB dongle to now show up when running "iw list" with an old iw version without split dump support. Cc: stable@vger.kernel.org Fixes: 3713b4e364ef ("nl80211: allow splitting wiphy information in dumps") Signed-off-by: Pontus Fuchs <pontus.fuchs@gmail.com> [avoid the entire workaround when state->split is set] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-01-17Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
2014-01-15net: nl80211: __dev_get_by_index instead of dev_get_by_index to find interfaceYing Xue
As __cfg80211_rdev_from_attrs(), nl80211_dump_wiphy_parse() and nl80211_set_wiphy() are all under rtnl_lock protection, __dev_get_by_index() instead of dev_get_by_index() should be used to find interface handler in them allowing us to avoid to change interface reference counter. Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-13cfg80211: make regulatory_hint() remove REGULATORY_CUSTOM_REGLuis R. Rodriguez
The REGULATORY_CUSTOM_REG can be used during early init with the goal of overriding the wiphy's default regulatory settings in case the alpha2 of the device is not known. In the case that the alpha2 becomes known lets avoid having drivers having to clear the REGULATORY_CUSTOM_REG flag by doing it for them when regulatory_hint() is used. Cc: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-13Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
2014-01-09cfg80211: add sanity check for retry limit in wext-compatUjjal Roy
Block setting the wrong values through iwconfig retry command. Add sanity checking before sending the retry limit to the driver. Signed-off-by: Ujjal Roy <royujjal@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-01-09cfg80211: Add a function to get the number of supported channelsIlan Peer
Add a utility function to get the number of channels supported by the device, and update the places in the code that need this data. Signed-off-by: Ilan Peer <ilan.peer@intel.com> [replace another occurrence in libertas, fix kernel-doc, fix bugs] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-01-06Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
2014-01-06cfg80211: fix wext-compat for getting retry valueUjjal Roy
While getting the retry limit, wext-compat returns the value without updating the flag for retry->flags is 0. Also in this case, it updates long retry flag when short and long retry value are unequal. So, iwconfig never showing "Retry short limit" and showing "Retry long limit" when both values are unequal. Updated the flags and corrected the condition properly. Signed-off-by: Ujjal Roy <royujjal@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-01-06nl80211: move vendor/testmode event skb functions out of ifdefJohannes Berg
The vendor/testmode event skb functions are needed outside the ifdef for vendor-specific events, so move them out. Reported-by: Jouni Malinen <j@w1.fi> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-30cfg80211/mac80211: correct qos-map lockingJohannes Berg
Since the RTNL can't always be held, use wdev/sdata locking for the qos-map dereference in mac80211. This requires cfg80211 to consistently lock it, which it was missing in one place. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-19cfg80211: Add support for QoS mappingKyeyoon Park
This allows QoS mapping from external networks to be implemented as defined in IEEE Std 802.11-2012, 10.24.9. APs can use this to advertise DSCP ranges and exceptions for mapping frames to a specific UP over Wi-Fi. The payload of the QoS Map Set element (IEEE Std 802.11-2012, 8.4.2.97) is sent to the driver through the new NL80211_ATTR_QOS_MAP attribute to configure the local behavior either on the AP (based on local configuration) or on a station (based on information received from the AP). Signed-off-by: Kyeyoon Park <kyeyoonp@qca.qualcomm.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-19nl80211: support vendor-specific eventsJohannes Berg
In addition to vendor-specific commands, also support vendor-specific events. These must be registered with cfg80211 before they can be used. They're also advertised in nl80211 in the wiphy information so that userspace knows can be expected. The events themselves are sent on a new multicast group called "vendor". Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-16nl80211: add VHT support for set_bitrate_maskJanusz Dziedzic
Add VHT MCS/NSS set support for nl80211_set_tx_bitrate_mask(). This should be used mainly for test purpose, to check different MCS/NSS VHT combinations. Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-16radiotap: fix bitmap-end-finding buffer overrunJohannes Berg
Evan Huus found (by fuzzing in wireshark) that the radiotap iterator code can access beyond the length of the buffer if the first bitmap claims an extension but then there's no data at all. Fix this. Cc: stable@vger.kernel.org Reported-by: Evan Huus <eapache@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-16Merge remote-tracking branch 'wireless-next/master' into mac80211-nextJohannes Berg
2013-12-06Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless Conflicts: drivers/net/wireless/brcm80211/Kconfig net/mac80211/util.c
2013-12-05cfg80211: don't "leak" uncompleted scansEliad Peller
___cfg80211_scan_done() can be called in some cases (e.g. on NETDEV_DOWN) before the low level driver notified scan completion (which is indicated by passing leak=true). Clearing rdev->scan_req in this case is buggy, as scan_done_wk might have already being queued/running (and can't be flushed as it takes rtnl()). If a new scan will be requested at this stage, the scan_done_wk will try freeing it (instead of the previous scan), and this will later result in a use after free. Simply remove the "leak" option, and replace it with a standard WARN_ON. An example backtrace after such crash: Unable to handle kernel paging request at virtual address fffffee5 pgd = c0004000 [fffffee5] *pgd=9fdf6821, *pte=00000000, *ppte=00000000 Internal error: Oops: 17 [#1] SMP ARM PC is at cfg80211_scan_done+0x28/0xc4 [cfg80211] LR is at __ieee80211_scan_completed+0xe4/0x2dc [mac80211] [<bf0077b0>] (cfg80211_scan_done+0x28/0xc4 [cfg80211]) [<bf0973d4>] (__ieee80211_scan_completed+0xe4/0x2dc [mac80211]) [<bf0982cc>] (ieee80211_scan_work+0x94/0x4f0 [mac80211]) [<c005fd10>] (process_one_work+0x1b0/0x4a8) [<c0060404>] (worker_thread+0x138/0x37c) [<c0066d70>] (kthread+0xa4/0xb0) Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-05cfg80211: stop sched scan only when neededBarak Bercovitz
cfg80211_leave stops sched scan when any station vif is leaving. Add an explicit check and call it only when the relevant vif (the one we scan on) is leaving. Signed-off-by: Barak Bercovitz <barak@wizery.com> [Eliad - changed the commit message a bit] Signed-off-by: Eliad Peller <eliad@wizery.com> [Johannes - add ASSERT_RTNL since that protects the pointer] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-05cfg80211: in bitrate_mask, rename mcs to ht_mcsJanusz Dziedzic
Rename NL80211_TXRATE_MCS to NL80211_TXRATE_HT and also rename mcs to ht_mcs in struct cfg80211_bitrate_mask. Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> [reword commit message] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-05nl80211: allow setting bitrate mask back to defaultJanusz Dziedzic
Allow setting the bitrate masks back to default by omitting the NL80211_ATTR_TX_RATES attribute. Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> [rephrase commit message] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-05cfg80211: fix WARN_ON for re-association to the expired BSSUjjal Roy
cfg80211 allows re-association in managed mode and if a user wants to re-associate to the same AP network after the time period of IEEE80211_SCAN_RESULT_EXPIRE, cfg80211 warns with the following message on receiving the connect result event. ------------[ cut here ]------------ WARNING: CPU: 0 PID: 13984 at net/wireless/sme.c:658 __cfg80211_connect_result+0x3a6/0x3e0 [cfg80211]() Call Trace: [<ffffffff81747a41>] dump_stack+0x46/0x58 [<ffffffff81045847>] warn_slowpath_common+0x87/0xb0 [<ffffffff81045885>] warn_slowpath_null+0x15/0x20 [<ffffffffa05345f6>] __cfg80211_connect_result+0x3a6/0x3e0 [cfg80211] [<ffffffff8107168b>] ? update_rq_clock+0x2b/0x50 [<ffffffff81078c01>] ? update_curr+0x1/0x160 [<ffffffffa05133d2>] cfg80211_process_wdev_events+0xb2/0x1c0 [cfg80211] [<ffffffff81079303>] ? pick_next_task_fair+0x63/0x170 [<ffffffffa0513518>] cfg80211_process_rdev_events+0x38/0x90 [cfg80211] [<ffffffffa050f03d>] cfg80211_event_work+0x1d/0x30 [cfg80211] [<ffffffff8105f21f>] process_one_work+0x17f/0x420 [<ffffffff8105f90a>] worker_thread+0x11a/0x370 [<ffffffff8105f7f0>] ? rescuer_thread+0x2f0/0x2f0 [<ffffffff8106638b>] kthread+0xbb/0xc0 [<ffffffff810662d0>] ? kthread_create_on_node+0x120/0x120 [<ffffffff817574bc>] ret_from_fork+0x7c/0xb0 [<ffffffff810662d0>] ? kthread_create_on_node+0x120/0x120 ---[ end trace 61f3bddc9c4981f7 ]--- The reason is that, in connect result event cfg80211 unholds the BSS to which the device is associated (and was held so far). So, for the event with status successful, when cfg80211 wants to get that BSS from the device's BSS list it gets a NULL BSS because the BSS has been expired and unheld already. Fix it by reshuffling the code. Signed-off-by: Ujjal Roy <royujjal@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-04nl80211: allow the use of DFS channel in meshChun-Yeow Yeoh
This permits the use of DFS channel once the CAC is conducted and no radar is detected. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-03nl80211: vendor command supportJohannes Berg
Add support for vendor-specific commands to nl80211. This is intended to be used for really vendor-specific functionality that can't be implemented in a generic fashion for any reason. It's *NOT* intended to be used for any normal/generic feature or any optimisations that could be implemented across drivers. Currently, only vendor commands (with replies) are supported, no dump operations or vendor-specific notifications. Also add a function wdev_to_ieee80211_vif() to mac80211 which is needed for mac80211-based drivers wanting to implement any vendor commands. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-03nl80211: don't clear bitrate_mask twiceJanusz Dziedzic
Don't clear cfg80211_bitrate_mask twice in nl80211_set_tx_bitrate_mask() function. Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-03cfg80211: DFS check dfs_region before usageLuis R. Rodriguez
Check the DFS region before channel availability check. Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-03cfg80211: add reg_get_dfs_region()Luis R. Rodriguez
This can be used outside of the regulatory context for any checks on the DFS region. The central cfg80211 dfs_region is always used and if it does not match with the wiphy a debug print is issued. Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-03nl80211/cfg80211: Set Operating Mode NotificationMarek Kwaczynski
This attribute is needed for setting Operating Mode Notification in AP mode from User Space. This functionality is required when User Space received Assoc Request contains Operation Mode Notification element. Signed-off-by: Marek Kwaczynski <marek.kwaczynski@tieto.com> [fix typos, nl80211 documentation] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-02Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
2013-12-02cfg80211: disable CSA for all driversSimon Wunderlich
The channel switch announcement code has some major locking problems which can cause a deadlock in worst case. A series of fixes has been proposed, but these are non-trivial and need to be tested first. Therefore disable CSA completely for 3.13. Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-02cfg80211/mac80211/ath6kl: acquire wdev lock outside ch_switch_notifySimon Wunderlich
The channel switch notification should be sent under the wdev/sdata-lock, preferably in the same moment as the channel change happens, to avoid races by other callers (e.g. start/stop_ap). This also adds the previously missing sdata_lock protection in csa_finalize_work. Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-02cfg80211: protect beacon changing functions with wdev-lockSimon Wunderlich
To avoid race conditions in functions which modify the beacon information, lock these using the wdev lock. This is especially required to avoid problems for csa handling functions which modify beacons but can not be called under rtnl lock. Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-02cfg80211: aggregate mgmt_tx parameters into a structAndrei Otcheretianski
Change cfg80211 and mac80211 to use cfg80211_mgmt_tx_params struct to aggregate parameters for mgmt_tx functions. This makes the functions' signatures less clumsy and allows less painful parameters extension. Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> [fix all other drivers] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-02cfg80211: fix reporting 5/10 MHz support to user spaceFelix Fietkau
nla_put_flag needs a real nl80211 attribute id, not a wiphy flag bit. While at it, split 5 and 10 MHz capability flags in case we ever need to support hardware that can only do one of the two. Also move the flag settings to the split-only information so we don't increase the space needed for old userspace. Signed-off-by: Felix Fietkau <nbd@openwrt.org> [change location of flag setting] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25cfg80211: replace print_dfs_region() with reg_dfs_region_str() helperLuis R. Rodriguez
This lets us later reuse the more generic reg_dfs_region_str(). Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25cfg80211: distinguish unset DFS region from unknownLuis R. Rodriguez
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25cfg80211: intersection dfs regions when intersecting regdomainsLuis R. Rodriguez
Only allow DFS to be set if the DFS regions agree. Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25cfg80211: use enum nl80211_dfs_regions for dfs_region everywhereLuis R. Rodriguez
u8 was used in some other places, just stick to the enum, this forces us to express the values that are expected. Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25cfg80211: add an option to disable processing country IEsLuis R. Rodriguez
Certain vendors may want to disable the processing of country IEs so that they can continue using the regulatory domain the driver or user has set. Currently there is no way to stop the core from processing country IEs, so add support to the core to ignore country IE hints. Cc: Mihir Shete <smihir@qti.qualcomm.com> Cc: Henri Bahini <hbahini@qca.qualcomm.com> Cc: Tushnim Bhattacharyya <tushnimb@qca.qualcomm.com> Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25cfg80211: add flags to define country IE processing rulesLuis R. Rodriguez
802.11 cards may have different country IE parsing behavioural preferences and vendors may want to support these. These preferences were managed by the REGULATORY_CUSTOM_REG and the REGULATORY_STRICT_REG flags and their combination. Instead of using this existing notation, split out the country IE behavioural preferences as a new flag. This will allow us to add more customizations easily and make the code more maintainable. Cc: Mihir Shete <smihir@qti.qualcomm.com> Cc: Henri Bahini <hbahini@qca.qualcomm.com> Cc: Tushnim Bhattacharyya <tushnimb@qca.qualcomm.com> Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> [fix up conflicts] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25cfg80211: move regulatory flags to their own variableLuis R. Rodriguez
We'll expand this later, this will make it easier to classify and review what things are related to regulatory or not. Coccinelle only missed 4 hits, which I had to do manually, supplying the SmPL in case of merge conflicts. @@ struct wiphy *wiphy; @@ -wiphy->flags |= WIPHY_FLAG_CUSTOM_REGULATORY +wiphy->regulatory_flags |= REGULATORY_CUSTOM_REG @@ expression e; @@ -e->flags |= WIPHY_FLAG_CUSTOM_REGULATORY +e->regulatory_flags |= REGULATORY_CUSTOM_REG @@ struct wiphy *wiphy; @@ -wiphy->flags &= ~WIPHY_FLAG_CUSTOM_REGULATORY +wiphy->regulatory_flags &= ~REGULATORY_CUSTOM_REG @@ struct wiphy *wiphy; @@ -wiphy->flags & WIPHY_FLAG_CUSTOM_REGULATORY +wiphy->regulatory_flags & REGULATORY_CUSTOM_REG @@ struct wiphy *wiphy; @@ -wiphy->flags |= WIPHY_FLAG_STRICT_REGULATORY +wiphy->regulatory_flags |= REGULATORY_STRICT_REG @@ expression e; @@ -e->flags |= WIPHY_FLAG_STRICT_REGULATORY +e->regulatory_flags |= REGULATORY_STRICT_REG @@ struct wiphy *wiphy; @@ -wiphy->flags &= ~WIPHY_FLAG_STRICT_REGULATORY +wiphy->regulatory_flags &= ~REGULATORY_STRICT_REG @@ struct wiphy *wiphy; @@ -wiphy->flags & WIPHY_FLAG_STRICT_REGULATORY +wiphy->regulatory_flags & REGULATORY_STRICT_REG @@ struct wiphy *wiphy; @@ -wiphy->flags |= WIPHY_FLAG_DISABLE_BEACON_HINTS +wiphy->regulatory_flags |= REGULATORY_DISABLE_BEACON_HINTS @@ expression e; @@ -e->flags |= WIPHY_FLAG_DISABLE_BEACON_HINTS +e->regulatory_flags |= REGULATORY_DISABLE_BEACON_HINTS @@ struct wiphy *wiphy; @@ -wiphy->flags &= ~WIPHY_FLAG_DISABLE_BEACON_HINTS +wiphy->regulatory_flags &= ~REGULATORY_DISABLE_BEACON_HINTS @@ struct wiphy *wiphy; @@ -wiphy->flags & WIPHY_FLAG_DISABLE_BEACON_HINTS +wiphy->regulatory_flags & REGULATORY_DISABLE_BEACON_HINTS Generated-by: Coccinelle SmPL Cc: Julia Lawall <julia.lawall@lip6.fr> Cc: Peter Senna Tschudin <peter.senna@gmail.com> Cc: Mihir Shete <smihir@qti.qualcomm.com> Cc: Henri Bahini <hbahini@qca.qualcomm.com> Cc: Tushnim Bhattacharyya <tushnimb@qca.qualcomm.com> Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> [fix up whitespace damage, overly long lines] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25cfg80211: rename __set_regdom() to reg_set_rd_country_ie()Luis R. Rodriguez
This reflects that case is now completely separated. Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25cfg80211: set driver regulatory updates on its ownLuis R. Rodriguez
This splits up the driver regulatory update on its own, this helps simplify the reading the case. Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25cfg80211: set user regulatory updates on its ownLuis R. Rodriguez
This splits out the user regulatory update on its own, this helps simplify reading the case. Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25cfg80211: set core regulatory updates on its ownLuis R. Rodriguez
This splits up the core regulatory update to be set on its own helper. This should make it easier to read exactly what type of requests should be expected there. In this case its clear that NL80211_REGDOM_SET_BY_CORE is only used by the core for updating the world regulatory domain. This is consistant with the nl80211.h documentation. Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> [add warning to default switch case to avoid compiler warning] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25cfg80211: pass the last_request to __set_regdom()Luis R. Rodriguez
last_request is RCU protected, since we're getting it on set_regdom() we might as well pass it to ensure the same request is being processed, otherwise there is a small race it could have changed. This makes processing of the request atomic. Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25cfg80211: move core reg_notfier() check to sourceLuis R. Rodriguez
Drivers that set the WIPHY_FLAG_CUSTOM_REGULATORY skip the core world regulatory domain updates, but do want their reg_notifier() called. Move the check for this closer to the source of the check that detected skipped was required and while at it add a helper for the notifier calling. This has no functional changes. This brings together the place where we call the reg_notifier() will be called. Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit v0.10.2 at 2024-11-14 07:52:03 (GMT)