summaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)Author
2012-10-26mac80211: add explicit AP/GO driver operationsJohannes Berg
Depending on the driver, a lot of setup may be necessary to start operating as an AP, some of which may fail. Add an explicit AP start driver method to make such failures easier to handle, and add an AP stop driver method for symmetry. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-26mac80211: move AP teardown code to correct placeJohannes Berg
Since cfg80211 will now call the explicit stop_ap operation when an AP interface goes down, move all teardown code there and remove it from interface handling. The only thing that needs to stay is the code to dev_close() all dependent VLANs. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-26mac80211: a few formatting fixesJohannes Berg
Fix a few code formatting issues in the RX code. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-25mac80211: complete bss_info tracingJohannes Berg
Some fields have been added but were missed in tracing, add them now. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-25mac80211: use non-atomic bitmap operation for local variableJohannes Berg
For a local variable there's no need to use the atomic set_bit() operation, use __set_bit() instead. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-25mac80211: remove duplicate check in ieee80211_rx_mgmt_beaconRami Rosen
Remove a duplicate check in ieee80211_rx_mgmt_beacon, there is no need to make again the same check for the IEEE80211_HW_PS_NULLFUNC_STACK twice; the two ifs can be consolidated. Signed-off-by: Rami Rosen <ramirose@gmail.com> [reword commit message & break long lines and also clean up variable] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-23cfg80211: add tracing for P2P Device start/stopJohannes Berg
These were missed due to the tracing work having started on a kernel that didn't have P2P Device yet, implement them now. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-23mac80211: expose AES-CMAC subkey calculationAssaf Krauss
Expose a function for the AES-CMAC subkey calculation to drivers. This is the first step of the AES-CMAC cipher key setup and may be required for CMAC hardware offloading. Signed-off-by: Assaf Krauss <assaf.krauss@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-23mac80211: mesh STAs only process mesh beaconsThomas Pedersen
Before, a mesh STA would execute some code on behalf of AP or IBSS beacons. Since the mesh stack currently does not consider anything but other mesh STAs interesting, limit processing to just these and save a little overhead. Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-22mac80211: fix WDS channel context testJohannes Berg
WDS is (currently) not allowed when channel contexts are *supported*, not when they're *not* supported. Fix the inverted test. Reported-by: Ronald <ronald645@gmail.com> Tested-by: Ronald <ronald645@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-19mac80211: make client powersave independent of interface typeMarco Porsch
This patch prepares mac80211 for a later implementation of mesh or ad-hoc powersave clients. The structures related to powersave (buffer, TIM map, counters) are moved from the AP-specific interface structure to a generic structure that can be embedded into any interface type. The functions related to powersave are prepared to allow easy extension with different interface types. For example with: + } else if (sta->sdata->vif.type == NL80211_IFTYPE_MESH_POINT) { + ps = &sdata->u.mesh.ps; Some references to the AP's beacon structure are removed where they were obviously not used. The patch compiles without warning and has been briefly tested as AP interface with one client in PS mode. Signed-off-by: Marco Porsch <marco.porsch@etit.tu-chemnitz.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-18nl/cfg80211: force scan using an AP vif if requestedAntonio Quartulli
If the user wants to scan using a vif configured as AP, cfg80211 must give him a chance to do it, even if this will disrupt the stations performance due to off-channel scanning. To do so, this patch adds a 'force' flag to the SCAN_TRIGGER command which tells cfg80211 to perform the scanning operation even if the vif is an AP and the beaconing has already started. Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-18cfg80211: add cfg80211 exported function tracingBeni Lev
Also add tracing to the API functions that drivers (and mac80211) can call in cfg80211. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-18cfg80211: add tracing to rdev-opsBeni Lev
Add tracing to make debugging cfg80211/mac80211 (or full-mac driver) interaction easier. Signed-off-by: Beni Lev <beni.lev@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Hila Gonen <hila.gonen@intel.com> Tested-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [add a cast to int to sizeof() to avoid warning] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-18cfg80211: add wrappers for registered_device_opsHila Gonen
This will allow adding central tracing like in mac80211. Signed-off-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-18cfg80211: Disallow HT/WEP in IBSS modeSujith Manoharan
Currently, a user is allowed to choose a HT operating channel with WEP when creating an IBSS network. WEP is not allowed in HT configuration - this patch ensures that such requests are denied. Signed-off-by: Sujith Manoharan <c_manoha@qti.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-18mac80211: fix copy-paste typo in KconfigMarco Porsch
Signed-off-by: Marco Porsch <marco.porsch@etit.tu-chemnitz.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-18mac80211: use __printf attribute in debugfsJohannes Berg
The internal function mac80211_format_buffer() has a printf-style argument list, so add the attribute to have gcc verify that list. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-18mac80211: remove some unused codeJohannes Berg
There are a number of unused variables that gcc pointed out (when building with W=1) as well as some conditions that can never be true due to the datatypes used: unsigned values can't be less than zero. Remove this code. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-18mac80211: remove unimplemented mesh vendor syncJohannes Berg
There's no vendor-specific mesh sync implemented and there don't need to be dummy handlers that only print messages, so remove that code. While at it, also constify the mesh sync ops. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-18mac80211: Notify new IBSS network creationSujith Manoharan
Initialization of beacon transmission in IBSS mode depends on whether a new BSS is being created or joined. When joining an existing IBSS network, beaconing has to start only after a TSF-sync has happened - this is explained in 11.1.4. Introduce a new parameter in the BSS information structure to indicate creator/joiner mode. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-18mac80211: add support for tx to abort low priority scan requestsSam Leffler
Use NL80211_SCAN_FLAG_LOW_PRIORITY flag in mac80211's scan state machine to prematurely terminate scan operations if outbound traffic collides. This is useful for marking background scans so they don't affect throughput. Signed-off-by: Sam Leffler <sleffler@chromium.org> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> [set feature flag only if software scan is used] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-18cfg80211: add support for flushing old scan resultsSam Leffler
Add an NL80211_SCAN_FLAG_FLUSH flag that causes old bss cache entries to be flushed on scan completion. This is useful for collecting guaranteed fresh scan/survey result (e.g. on resume). For normal scan, flushing only happens on successful completion of a scan; i.e. it does not happen if the scan is aborted. For scheduled scan, previous scan results are flushed everytime when we get new scan results. This feature is enabled by default. Drivers can disable it by unsetting the NL80211_FEATURE_SCAN_FLUSH flag. Signed-off-by: Sam Leffler <sleffler@chromium.org> Tested-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> [invert polarity of feature flag to account for old kernels] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-18wireless: use OR operation to set wiphy featuresJohannes Berg
The next patch will introduce a flag that is set by default in cfg80211 so drivers and mac80211 need to use |= to set features they have so that they don't clear the already-set feature. We could set the flag in wiphy_register() instead of wiphy_new() to avoid this patch, but then the drivers couldn't *unset* flags they don't want to use even though the implementation is generic. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-18cfg80211: add scan flag to indicate its prioritySam Leffler
Add NL80211_SCAN_FLAG_LOW_PRIORITY flag support. It tells drivers that this is a low priority scan request, so that they can take necessary action. Drivers need to advertise low priority scan capability during registration. Signed-off-by: Sam Leffler <sleffler@chromium.org> Tested-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-18cfg80211: code rearrangement to avoid forward declarationsAmitkumar Karwar
bss_release() and __cfg80211_unlink_bss() function definitions are moved at the begining of the file. They are used in next patch in this series. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-18{nl,cfg}80211: add a flags word to scan requestsSam Leffler
Add a flags word to direct and scheduled scan requests; it will be used for control of optional behaviours such as flushing the bss cache prior to doing a scan. Signed-off-by: Sam Leffler <sleffler@chromium.org> Tested-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-17{nl,cfg}80211: Peer STA VHT capsMahesh Palivela
To save STAs VHT caps in AP mode Signed-off-by: Mahesh Palivela <maheshp@posedge.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-17mac80211: VHT peer STA capsMahesh Palivela
Save the AP's VHT capabilities (in managed mode) and make them available to the driver in the station information. Unlike HT capabilities, they aren't restricted to the common capabilities, so drivers must be aware of their own capabilities. Signed-off-by: Mahesh Palivela <maheshp@posedge.com> [fix endian conversion bug ...] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-17ieee80211: Rename VHT cap structMahesh Palivela
Rename struct ieee80211_vht_capabilities to ieee80211_vht_cap and renamed its member vht_capabilities_info to vht_cap_info. Signed-off-by: Mahesh Palivela <maheshp@posedge.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-17mac80211: move out the non-statistics variable estab_plinks from mesh_statAshok Nagarajan
estab_plinks is not a statistics member. Hence move estab_plinks from struct mesh_stat to struct ieee80211_if_mesh Signed-off-by: Ashok Nagarajan <ashok@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-17mac80211: Use appropriate debug wrapperMohammed Shafi Shajakhan
ieee80211_sta_expire will be called by both IBSS and mesh interfaces to account for inactive stations, so it would be more appropriate to use sta_dbg instead of ibss_dbg. Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-17mac80211: Allow station mode SAE to be implemented in user spaceJouni Malinen
SAE uses two rounds of Authentication frames and both rounds require considerable calculation to be done. This commit extends the existing station mode authentication request to allow more control for user space programs to build the SAE fields and to run the authentication step ones. Only the second round with authentication transaction sequence 2 will result in moving to authenticated state. Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-17cfg80211: Allow user space to specify non-IEs to SAE AuthenticationJouni Malinen
SAE extends Authentication frames with fields that are not information elements. NL80211_ATTR_IE is not suitable for these, so introduce a new attribute that can be used to specify the fields needed for SAE in station mode. Signed-off-by: Jouni Malinen <j@w1.fi> [change to verify that SAE is only used with authenticate command] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-17mac80211: Add debug print on unexpect authentication stateJouni Malinen
This is useful when debugging authentication process issues. Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-17mac80211: Take status code as parameter to ieee80211_send_authJouni Malinen
Non-zero status code may be needed for Authentication frames, e.g., when using SAE. Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-17mac80211: add channel context iteratorJohannes Berg
Drivers may need to iterate the active channel contexts, export an iterator function to allow that. To make it possible, use RCU-safe list functions. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-17mac80211: track needed RX chains for channel contextsJohannes Berg
On each channel that the device is operating on, it may need to listen using one or more chains depending on the SMPS settings of the interfaces using it. The previous channel context changes completely removed this ability (before, it was available as the SMPS mode). Add per-context tracking of the required static and dynamic RX chains and notify the driver on changes. To achieve this, track the chains and SMPS mode used on each virtual interface and update the channel context whenever this changes. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-17mac80211: use channel contextsJohannes Berg
Instead of operating on a single channel only, use the new channel context infrastructure in all mac80211 code. This enables drivers that want to use the new channel context infrastructure to use multiple channels, while nothing should change for all the other drivers that don't support it. Right now this disables both TX power settings and spatial multiplexing powersave. Both need to be re-enabled on a channel context basis. Additionally, when channel contexts are used drop the connection when channel switch is received rather than trying to handle it. This will have to be improved later. [With fixes from Eliad and Emmanuel incorporated] Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-16mac80211: track whether to use channel contextsJohannes Berg
Depending on the driver, channel contexts may be used or not. If they are used, the driver must have support for hardware scan and remain-on-channel; otherwise the driver must not advertise support for multiple channels. Also prohibit WDS type interfaces when channel contexts are to be used as there's no clear definition of which channel they use. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-16mac80211: check channel context methodsJohannes Berg
Verify that the channel context methods are all assigned by the driver or not used. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-16mac80211: reuse channels for channel contextsMichal Kazior
Reuse channels with compatible channel types. Some channel types are compatible and can be used concurrently. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-16mac80211: use channel context notificationsMichal Kazior
Channel context pointer will be accessible on both assign and unassign events. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-16mac80211: introduce new ieee80211_opsMichal Kazior
Introduce channel context driver methods. The channel on a context channel is immutable, but the channel type and other properties can change. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-16mac80211: introduce channel context skeleton codeMichal Kazior
Channel context are the foundation for multi-channel operation. They are are immutable and are re-created (or re-used if other interfaces are bound to a certain channel and a compatible channel type) on channel switching. This is an initial implementation and more features will come in separate patches. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> [some changes including RCU protection] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-14Merge branch 'modules-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull module signing support from Rusty Russell: "module signing is the highlight, but it's an all-over David Howells frenzy..." Hmm "Magrathea: Glacier signing key". Somebody has been reading too much HHGTTG. * 'modules-next' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: (37 commits) X.509: Fix indefinite length element skip error handling X.509: Convert some printk calls to pr_devel asymmetric keys: fix printk format warning MODSIGN: Fix 32-bit overflow in X.509 certificate validity date checking MODSIGN: Make mrproper should remove generated files. MODSIGN: Use utf8 strings in signer's name in autogenerated X.509 certs MODSIGN: Use the same digest for the autogen key sig as for the module sig MODSIGN: Sign modules during the build process MODSIGN: Provide a script for generating a key ID from an X.509 cert MODSIGN: Implement module signature checking MODSIGN: Provide module signing public keys to the kernel MODSIGN: Automatically generate module signing keys if missing MODSIGN: Provide Kconfig options MODSIGN: Provide gitignore and make clean rules for extra files MODSIGN: Add FIPS policy module: signature checking hook X.509: Add a crypto key parser for binary (DER) X.509 certificates MPILIB: Provide a function to read raw data into an MPI X.509: Add an ASN.1 decoder X.509: Add simple ASN.1 grammar compiler ...
2012-10-13Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull user namespace compile fixes from Eric W Biederman: "This tree contains three trivial fixes. One compiler warning, one thinko fix, and one build fix" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: btrfs: Fix compilation with user namespace support enabled userns: Fix posix_acl_file_xattr_userns gid conversion userns: Properly print bluetooth socket uids
2012-10-13Merge branch 'for-3.7' of git://linux-nfs.org/~bfields/linuxLinus Torvalds
Pull nfsd update from J Bruce Fields: "Another relatively quiet cycle. There was some progress on my remaining 4.1 todo's, but a couple of them were just of the form "check that we do X correctly", so didn't have much affect on the code. Other than that, a bunch of cleanup and some bugfixes (including an annoying NFSv4.0 state leak and a busy-loop in the server that could cause it to peg the CPU without making progress)." * 'for-3.7' of git://linux-nfs.org/~bfields/linux: (46 commits) UAPI: (Scripted) Disintegrate include/linux/sunrpc UAPI: (Scripted) Disintegrate include/linux/nfsd nfsd4: don't allow reclaims of expired clients nfsd4: remove redundant callback probe nfsd4: expire old client earlier nfsd4: separate session allocation and initialization nfsd4: clean up session allocation nfsd4: minor free_session cleanup nfsd4: new_conn_from_crses should only allocate nfsd4: separate connection allocation and initialization nfsd4: reject bad forechannel attrs earlier nfsd4: enforce per-client sessions/no-sessions distinction nfsd4: set cl_minorversion at create time nfsd4: don't pin clientids to pseudoflavors nfsd4: fix bind_conn_to_session xdr comment nfsd4: cast readlink() bug argument NFSD: pass null terminated buf to kstrtouint() nfsd: remove duplicate init in nfsd4_cb_recall nfsd4: eliminate redundant nfs4_free_stateid fs/nfsd/nfs4idmap.c: adjust inconsistent IS_ERR and PTR_ERR ...
2012-10-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking updates from David Miller: 1) Alexey Kuznetsov noticed we routed TCP resets improperly in the assymetric routing case, fix this by reverting a change that made us use the incoming interface in the outgoing route key when we didn't have a socket context to work with. 2) TCP sysctl kernel memory leakage to userspace fix from Alan Cox. 3) Move UAPI bits from David Howells, WIMAX and CAN this time. 4) Fix TX stalls in e1000e wrt. Byte Queue Limits, from Hiroaki SHIMODA, Denys Fedoryshchenko, and Jesse Brandeburg. 5) Fix IPV6 crashes in packet generator module, from Amerigo Wang. 6) Tidies and fixes in the new VXLAN driver from Stephen Hemminger. 7) Bridge IP options parse doesn't check first if SKB header has at least an IP header's worth of content present. Fix from Sarveshwar Bandi. 8) The kernel now generates compound pages on transmit and the Xen netback drivers needs some adjustments in order to handle this. Fix from Ian Campbell. 9) Turn off ASPM in JME driver, from Kevin Bardon and Matthew Garrett. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (43 commits) mcs7830: Fix link state detection net: add doc for in4_pton() net: add doc for in6_pton() vti: fix sparse bit endian warnings tcp: resets are misrouted usbnet: Support devices reporting idleness Add CDC-ACM support for the CX93010-2x UCMxx USB Modem net/ethernet/jme: disable ASPM tcp: sysctl interface leaks 16 bytes of kernel memory kaweth: print correct debug ptr e1000e: Change wthresh to 1 to avoid possible Tx stalls ipv4: fix route mark sparse warning xen: netback: handle compound page fragments on transmit. bridge: Pull ip header into skb->data before looking into ip header. isdn: fix a wrapping bug in isdn_ppp_ioctl() vxlan: fix oops when give unknown ifindex vxlan: fix receive checksum handling vxlan: add additional headroom vxlan: allow configuring port range vxlan: associate with tunnel socket on transmit ...
2012-10-12userns: Properly print bluetooth socket uidsEric W. Biederman
With user namespace support enabled building bluetooth generated the warning. net/bluetooth/af_bluetooth.c: In function ‘bt_seq_show’: net/bluetooth/af_bluetooth.c:598:7: warning: format ‘%u’ expects argument of type ‘unsigned int’, but argument 7 has type ‘kuid_t’ [-Wformat] Convert sock_i_uid from a kuid_t to a uid_t before printing, to avoid this problem. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Cc: Masatake YAMATO <yamato@redhat.com> Cc: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
generated by cgit v0.10.2 at 2024-11-10 07:16:46 (GMT)