| Age | Commit message (Collapse) | Author |
|---|
|
After Tom patch, thoff field could point past the end of the buffer,
this could fool some callers.
If an skb was provided, skb->len should be the upper limit.
If not, hlen is supposed to be the upper limit.
Fixes: a6e544b0a88b ("flow_dissector: Jump to exit code in __skb_flow_dissect")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Yibin Yang <yibyang@cisco.com
Acked-by: Alexander Duyck <alexander.h.duyck@intel.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If the bpf program calls bpf_redirect(dev, 0) and dev is
an ipip/ip6tnl, it currently includes the mac header.
e.g. If dev is ipip, the end result is IP-EthHdr-IP instead
of IP-IP.
The fix is to pull the mac header. At ingress, skb_postpull_rcsum()
is not needed because the ethhdr should have been pulled once already
and then got pushed back just before calling the bpf_prog.
At egress, this patch calls skb_postpull_rcsum().
If bpf_redirect(dev, BPF_F_INGRESS) is called,
it also fails now because it calls dev_forward_skb() which
eventually calls eth_type_trans(skb, dev). The eth_type_trans()
will set skb->type = PACKET_OTHERHOST because the mac address
does not match the redirecting dev->dev_addr. The PACKET_OTHERHOST
will eventually cause the ip_rcv() errors out. To fix this,
____dev_forward_skb() is added.
Joint work with Daniel Borkmann.
Fixes: cfc7381b3002 ("ip_tunnel: add collect_md mode to IPIP tunnel")
Fixes: 8d79266bc48c ("ip6_tunnel: add collect_md mode to IPv6 tunnels")
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@fb.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This is a follow-up to commit 9ee6c5dc816a ("ipv4: allow local
fragmentation in ip_finish_output_gso()"), updating the comment
documenting cases in which fragmentation is needed for egress
GSO packets.
Suggested-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
Reviewed-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
Signed-off-by: Lance Richardson <lrichard@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Lorenzo noted an Android unit test failed due to e0d56fdd7342:
"The expectation in the test was that the RST replying to a SYN sent to a
closed port should be generated with oif=0. In other words it should not
prefer the interface where the SYN came in on, but instead should follow
whatever the routing table says it should do."
Revert the change to ip_send_unicast_reply and tcp_v6_send_response such
that the oif in the flow is set to the skb_iif only if skb_iif is an L3
master.
Fixes: e0d56fdd7342 ("net: l3mdev: remove redundant calls")
Reported-by: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Tested-by: Lorenzo Colitti <lorenzo@google.com>
Acked-by: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains a larger than usual batch of Netfilter
fixes for your net tree. This series contains a mixture of old bugs and
recently introduced bugs, they are:
1) Fix a crash when using nft_dynset with nft_set_rbtree, which doesn't
support the set element updates from the packet path. From Liping
Zhang.
2) Fix leak when nft_expr_clone() fails, from Liping Zhang.
3) Fix a race when inserting new elements to the set hash from the
packet path, also from Liping.
4) Handle segmented TCP SIP packets properly, basically avoid that the
INVITE in the allow header create bogus expectations by performing
stricter SIP message parsing, from Ulrich Weber.
5) nft_parse_u32_check() should return signed integer for errors, from
John Linville.
6) Fix wrong allocation instead of connlabels, allocate 16 instead of
32 bytes, from Florian Westphal.
7) Fix compilation breakage when building the ip_vs_sync code with
CONFIG_OPTIMIZE_INLINING on x86, from Arnd Bergmann.
8) Destroy the new set if the transaction object cannot be allocated,
also from Liping Zhang.
9) Use device to route duplicated packets via nft_dup only when set by
the user, otherwise packets may not follow the right route, again
from Liping.
10) Fix wrong maximum genetlink attribute definition in IPVS, from
WANG Cong.
11) Ignore untracked conntrack objects from xt_connmark, from Florian
Westphal.
12) Allow to use conntrack helpers that are registered NFPROTO_UNSPEC
via CT target, otherwise we cannot use the h.245 helper, from
Florian.
13) Revisit garbage collection heuristic in the new workqueue-based
timer approach for conntrack to evict objects earlier, again from
Florian.
14) Fix crash in nf_tables when inserting an element into a verdict map,
from Liping Zhang.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
To avoid having dangling function pointers left behind, reset calcit in
rtnl_unregister(), too.
This is no issue so far, as only the rtnl core registers a netlink
handler with a calcit hook which won't be unregistered, but may become
one if new code makes use of the calcit hook.
Fixes: c7ac8679bec9 ("rtnetlink: Compute and store minimum ifinfo...")
Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Cc: Greg Rose <gregory.v.rose@intel.com>
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
icmp_send is called in response to some event. The skb may not have
the device set (skb->dev is NULL), but it is expected to have an rt.
Update icmp_route_lookup to use the rt on the skb to determine L3
domain.
Fixes: 613d09b30f8b ("net: Use VRF device index for lookups on TX")
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Routes can specify an mtu explicitly or inherit the mtu from
the underlying device - this inheritance is implemented in
dst->ops->mtu handlers ip6_mtu() and ip6_blackhole_mtu().
Currently changing the mtu of a device adds mtu explicitly
to routes using that device.
ie.
# ip link set dev lo mtu 65536
# ip -6 route add local 2000::1 dev lo
# ip -6 route get 2000::1
local 2000::1 dev lo table local src ... metric 1024 pref medium
# ip link set dev lo mtu 65535
# ip -6 route get 2000::1
local 2000::1 dev lo table local src ... metric 1024 mtu 65535 pref medium
# ip link set dev lo mtu 65536
# ip -6 route get 2000::1
local 2000::1 dev lo table local src ... metric 1024 mtu 65536 pref medium
# ip -6 route del local 2000::1
After this patch the route entry no longer changes unless it already has an mtu.
There is no need: this inheritance is already done in ip6_mtu()
# ip link set dev lo mtu 65536
# ip -6 route add local 2000::1 dev lo
# ip -6 route add local 2000::2 dev lo mtu 2000
# ip -6 route get 2000::1; ip -6 route get 2000::2
local 2000::1 dev lo table local src ... metric 1024 pref medium
local 2000::2 dev lo table local src ... metric 1024 mtu 2000 pref medium
# ip link set dev lo mtu 65535
# ip -6 route get 2000::1; ip -6 route get 2000::2
local 2000::1 dev lo table local src ... metric 1024 pref medium
local 2000::2 dev lo table local src ... metric 1024 mtu 2000 pref medium
# ip link set dev lo mtu 1501
# ip -6 route get 2000::1; ip -6 route get 2000::2
local 2000::1 dev lo table local src ... metric 1024 pref medium
local 2000::2 dev lo table local src ... metric 1024 mtu 1501 pref medium
# ip link set dev lo mtu 65536
# ip -6 route get 2000::1; ip -6 route get 2000::2
local 2000::1 dev lo table local src ... metric 1024 pref medium
local 2000::2 dev lo table local src ... metric 1024 mtu 65536 pref medium
# ip -6 route del local 2000::1
# ip -6 route del local 2000::2
This is desirable because changing device mtu and then resetting it
to the previous value shouldn't change the user visible routing table.
Signed-off-by: Maciej Żenczykowski <maze@google.com>
CC: Eric Dumazet <edumazet@google.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Do not send the next message in sendmmsg for partial sendmsg
invocations.
sendmmsg assumes that it can continue sending the next message
when the return value of the individual sendmsg invocations
is positive. It results in corrupting the data for TCP,
SCTP, and UNIX streams.
For example, sendmmsg([["abcd"], ["efgh"]]) can result in a stream
of "aefgh" if the first sendmsg invocation sends only the first
byte while the second sendmsg goes through.
Datagram sockets either send the entire datagram or fail, so
this patch affects only sockets of type SOCK_STREAM and
SOCK_SEQPACKET.
Fixes: 228e548e6020 ("net: Add sendmmsg socket system call")
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Dalegaard says:
The following ruleset, when loaded with 'nft -f bad.txt'
----snip----
flush ruleset
table ip inlinenat {
map sourcemap {
type ipv4_addr : verdict;
}
chain postrouting {
ip saddr vmap @sourcemap accept
}
}
add chain inlinenat test
add element inlinenat sourcemap { 100.123.10.2 : jump test }
----snip----
results in a kernel oops:
BUG: unable to handle kernel paging request at 0000000000001344
IP: [<ffffffffa07bf704>] nf_tables_check_loops+0x114/0x1f0 [nf_tables]
[...]
Call Trace:
[<ffffffffa07c2aae>] ? nft_data_init+0x13e/0x1a0 [nf_tables]
[<ffffffffa07c1950>] nft_validate_register_store+0x60/0xb0 [nf_tables]
[<ffffffffa07c74b5>] nft_add_set_elem+0x545/0x5e0 [nf_tables]
[<ffffffffa07bfdd0>] ? nft_table_lookup+0x30/0x60 [nf_tables]
[<ffffffff8132c630>] ? nla_strcmp+0x40/0x50
[<ffffffffa07c766e>] nf_tables_newsetelem+0x11e/0x210 [nf_tables]
[<ffffffff8132c400>] ? nla_validate+0x60/0x80
[<ffffffffa030d9b4>] nfnetlink_rcv+0x354/0x5a7 [nfnetlink]
Because we forget to fill the net pointer in bind_ctx, so dereferencing
it may cause kernel crash.
Reported-by: Dalegaard <dalegaard@gmail.com>
Signed-off-by: Liping Zhang <zlpnobody@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Nicolas Dichtel says:
After commit b87a2f9199ea ("netfilter: conntrack: add gc worker to
remove timed-out entries"), netlink conntrack deletion events may be
sent with a huge delay.
Nicolas further points at this line:
goal = min(nf_conntrack_htable_size / GC_MAX_BUCKETS_DIV, GC_MAX_BUCKETS);
and indeed, this isn't optimal at all. Rationale here was to ensure that
we don't block other work items for too long, even if
nf_conntrack_htable_size is huge. But in order to have some guarantee
about maximum time period where a scan of the full conntrack table
completes we should always use a fixed slice size, so that once every
N scans the full table has been examined at least once.
We also need to balance this vs. the case where the system is either idle
(i.e., conntrack table (almost) empty) or very busy (i.e. eviction happens
from packet path).
So, after some discussion with Nicolas:
1. want hard guarantee that we scan entire table at least once every X s
-> need to scan fraction of table (get rid of upper bound)
2. don't want to eat cycles on idle or very busy system
-> increase interval if we did not evict any entries
3. don't want to block other worker items for too long
-> make fraction really small, and prefer small scan interval instead
4. Want reasonable short time where we detect timed-out entry when
system went idle after a burst of traffic, while not doing scans
all the time.
-> Store next gc scan in worker, increasing delays when no eviction
happened and shrinking delay when we see timed out entries.
The old gc interval is turned into a max number, scans can now happen
every jiffy if stale entries are present.
Longest possible time period until an entry is evicted is now 2 minutes
in worst case (entry expires right after it was deemed 'not expired').
Reported-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Thomas reports its not possible to attach the H.245 helper:
iptables -t raw -A PREROUTING -p udp -j CT --helper H.245
iptables: No chain/target/match by that name.
xt_CT: No such helper "H.245"
This is because H.245 registers as NFPROTO_UNSPEC, but the CT target
passes NFPROTO_IPV4/IPV6 to nf_conntrack_helper_try_module_get.
We should treat UNSPEC as wildcard and ignore the l3num instead.
Reported-by: Thomas Woerner <twoerner@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The (percpu) untracked conntrack entries can end up with nonzero connmarks.
The 'untracked' conntrack objects are merely a way to distinguish INVALID
(i.e. protocol connection tracker says payload doesn't meet some
requirements or packet was never seen by the connection tracking code)
from packets that are intentionally not tracked (some icmpv6 types such as
neigh solicitation, or by using 'iptables -j CT --notrack' option).
Untracked conntrack objects are implementation detail, we might as well use
invalid magic address instead to tell INVALID and UNTRACKED apart.
Check skb->nfct for untracked dummy and behave as if skb->nfct is NULL.
Reported-by: XU Tianwen <evan.xu.tianwen@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
family.maxattr is the max index for policy[], the size of
ops[] is determined with ARRAY_SIZE().
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The display of /proc/net/route has had a couple issues due to the fact that
when I originally rewrote most of fib_trie I made it so that the iterator
was tracking the next value to use instead of the current.
In addition it had an off by 1 error where I was tracking the first piece
of data as position 0, even though in reality that belonged to the
SEQ_START_TOKEN.
This patch updates the code so the iterator tracks the last reported
position and key instead of the next expected position and key. In
addition it shifts things so that all of the leaves start at 1 instead of
trying to report leaves starting with offset 0 as being valid. With these
two issues addressed this should resolve any off by one errors that were
present in the display of /proc/net/route.
Fixes: 25b97c016b26 ("ipv4: off-by-one in continuation handling in /proc/net/route")
Cc: Andy Whitcroft <apw@canonical.com>
Reported-by: Jason Baron <jbaron@akamai.com>
Tested-by: Jason Baron <jbaron@akamai.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
icmp6_send is called in response to some event. The skb may not have
the device set (skb->dev is NULL), but it is expected to have a dst set.
Update icmp6_send to use the dst on the skb to determine L3 domain.
Fixes: ca254490c8dfd ("net: Add VRF support to IPv6 stack")
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
sctp_wait_for_connect() currently already holds the asoc to keep it
alive during the sleep, in case another thread release it. But Andrey
Konovalov and Dmitry Vyukov reported an use-after-free in such
situation.
Problem is that __sctp_connect() doesn't get a ref on the asoc and will
do a read on the asoc after calling sctp_wait_for_connect(), but by then
another thread may have closed it and the _put on sctp_wait_for_connect
will actually release it, causing the use-after-free.
Fix is, instead of doing the read after waiting for the connect, do it
before so, and avoid this issue as the socket is still locked by then.
There should be no issue on returning the asoc id in case of failure as
the application shouldn't trust on that number in such situations
anyway.
This issue doesn't exist in sctp_sendmsg() path.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In __genl_register_family(), when genl_validate_assign_mc_groups()
fails, we forget to free the memory we possibly allocate for
family->attrbuf.
Note, some callers call genl_unregister_family() to clean up
on error path, it doesn't work because the family is inserted
to the global list in the nearly last step.
Cc: Jakub Kicinski <kubakici@wp.pl>
Cc: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
While fuzzing kernel with syzkaller, Andrey reported a nasty crash
in inet6_bind() caused by DCCP lacking a required method.
Fixes: ab1e0a13d7029 ("[SOCK] proto: Add hashinfo member to struct proto")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
dccp_v6_err() does not use pskb_may_pull() and might access garbage.
We only need 4 bytes at the beginning of the DCCP header, like TCP,
so the 8 bytes pulled in icmpv6_notify() are more than enough.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
A recent commit removed locking from netlink_diag_dump() but forgot
one error case.
=====================================
[ BUG: bad unlock balance detected! ]
4.9.0-rc3+ #336 Not tainted
-------------------------------------
syz-executor/4018 is trying to release lock ([ 36.220068] nl_table_lock
) at:
[<ffffffff82dc8683>] netlink_diag_dump+0x1a3/0x250 net/netlink/diag.c:182
but there are no more locks to release!
other info that might help us debug this:
3 locks held by syz-executor/4018:
#0: [ 36.220068] (
sock_diag_mutex[ 36.220068] ){+.+.+.}
, at: [ 36.220068] [<ffffffff82c3873b>] sock_diag_rcv+0x1b/0x40
#1: [ 36.220068] (
sock_diag_table_mutex[ 36.220068] ){+.+.+.}
, at: [ 36.220068] [<ffffffff82c38e00>] sock_diag_rcv_msg+0x140/0x3a0
#2: [ 36.220068] (
nlk->cb_mutex[ 36.220068] ){+.+.+.}
, at: [ 36.220068] [<ffffffff82db6600>] netlink_dump+0x50/0xac0
stack backtrace:
CPU: 1 PID: 4018 Comm: syz-executor Not tainted 4.9.0-rc3+ #336
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
ffff8800645df688 ffffffff81b46934 ffffffff84eb3e78 ffff88006ad85800
ffffffff82dc8683 ffffffff84eb3e78 ffff8800645df6b8 ffffffff812043ca
dffffc0000000000 ffff88006ad85ff8 ffff88006ad85fd0 00000000ffffffff
Call Trace:
[< inline >] __dump_stack lib/dump_stack.c:15
[<ffffffff81b46934>] dump_stack+0xb3/0x10f lib/dump_stack.c:51
[<ffffffff812043ca>] print_unlock_imbalance_bug+0x17a/0x1a0
kernel/locking/lockdep.c:3388
[< inline >] __lock_release kernel/locking/lockdep.c:3512
[<ffffffff8120cfd8>] lock_release+0x8e8/0xc60 kernel/locking/lockdep.c:3765
[< inline >] __raw_read_unlock ./include/linux/rwlock_api_smp.h:225
[<ffffffff83fc001a>] _raw_read_unlock+0x1a/0x30 kernel/locking/spinlock.c:255
[<ffffffff82dc8683>] netlink_diag_dump+0x1a3/0x250 net/netlink/diag.c:182
[<ffffffff82db6947>] netlink_dump+0x397/0xac0 net/netlink/af_netlink.c:2110
Fixes: ad202074320c ("netlink: Use rhashtable walk interface in diag dump")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
dccp_v4_err() does not use pskb_may_pull() and might access garbage.
We only need 4 bytes at the beginning of the DCCP header, like TCP,
so the 8 bytes pulled in icmp_socket_deliver() are more than enough.
This patch might allow to process more ICMP messages, as some routers
are still limiting the size of reflected bytes to 28 (RFC 792), instead
of extended lengths (RFC 1812 4.3.2.3)
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Andrey reported following warning while fuzzing with syzkaller
WARNING: CPU: 1 PID: 21072 at net/dccp/proto.c:83 dccp_set_state+0x229/0x290
Kernel panic - not syncing: panic_on_warn set ...
CPU: 1 PID: 21072 Comm: syz-executor Not tainted 4.9.0-rc1+ #293
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
ffff88003d4c7738 ffffffff81b474f4 0000000000000003 dffffc0000000000
ffffffff844f8b00 ffff88003d4c7804 ffff88003d4c7800 ffffffff8140c06a
0000000041b58ab3 ffffffff8479ab7d ffffffff8140beae ffffffff8140cd00
Call Trace:
[< inline >] __dump_stack lib/dump_stack.c:15
[<ffffffff81b474f4>] dump_stack+0xb3/0x10f lib/dump_stack.c:51
[<ffffffff8140c06a>] panic+0x1bc/0x39d kernel/panic.c:179
[<ffffffff8111125c>] __warn+0x1cc/0x1f0 kernel/panic.c:542
[<ffffffff8111144c>] warn_slowpath_null+0x2c/0x40 kernel/panic.c:585
[<ffffffff8389e5d9>] dccp_set_state+0x229/0x290 net/dccp/proto.c:83
[<ffffffff838a0aa2>] dccp_close+0x612/0xc10 net/dccp/proto.c:1016
[<ffffffff8316bf1f>] inet_release+0xef/0x1c0 net/ipv4/af_inet.c:415
[<ffffffff82b6e89e>] sock_release+0x8e/0x1d0 net/socket.c:570
[<ffffffff82b6e9f6>] sock_close+0x16/0x20 net/socket.c:1017
[<ffffffff815256ad>] __fput+0x29d/0x720 fs/file_table.c:208
[<ffffffff81525bb5>] ____fput+0x15/0x20 fs/file_table.c:244
[<ffffffff811727d8>] task_work_run+0xf8/0x170 kernel/task_work.c:116
[< inline >] exit_task_work include/linux/task_work.h:21
[<ffffffff8111bc53>] do_exit+0x883/0x2ac0 kernel/exit.c:828
[<ffffffff811221fe>] do_group_exit+0x10e/0x340 kernel/exit.c:931
[<ffffffff81143c94>] get_signal+0x634/0x15a0 kernel/signal.c:2307
[<ffffffff81054aad>] do_signal+0x8d/0x1a30 arch/x86/kernel/signal.c:807
[<ffffffff81003a05>] exit_to_usermode_loop+0xe5/0x130
arch/x86/entry/common.c:156
[< inline >] prepare_exit_to_usermode arch/x86/entry/common.c:190
[<ffffffff81006298>] syscall_return_slowpath+0x1a8/0x1e0
arch/x86/entry/common.c:259
[<ffffffff83fc1a62>] entry_SYSCALL_64_fastpath+0xc0/0xc2
Dumping ftrace buffer:
(ftrace buffer empty)
Kernel Offset: disabled
Fix this the same way we did for TCP in commit 565b7b2d2e63
("tcp: do not send reset to already closed sockets")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Andrey Konovalov reported following error while fuzzing with syzkaller :
IPv4: Attempt to release alive inet socket ffff880068e98940
kasan: CONFIG_KASAN_INLINE enabled
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] SMP KASAN
Modules linked in:
CPU: 1 PID: 3905 Comm: a.out Not tainted 4.9.0-rc3+ #333
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
task: ffff88006b9e0000 task.stack: ffff880068770000
RIP: 0010:[<ffffffff819ead5f>] [<ffffffff819ead5f>]
selinux_socket_sock_rcv_skb+0xff/0x6a0 security/selinux/hooks.c:4639
RSP: 0018:ffff8800687771c8 EFLAGS: 00010202
RAX: ffff88006b9e0000 RBX: 1ffff1000d0eee3f RCX: 1ffff1000d1d312a
RDX: 1ffff1000d1d31a6 RSI: dffffc0000000000 RDI: 0000000000000010
RBP: ffff880068777360 R08: 0000000000000000 R09: 0000000000000002
R10: dffffc0000000000 R11: 0000000000000006 R12: ffff880068e98940
R13: 0000000000000002 R14: ffff880068777338 R15: 0000000000000000
FS: 00007f00ff760700(0000) GS:ffff88006cd00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020008000 CR3: 000000006a308000 CR4: 00000000000006e0
Stack:
ffff8800687771e0 ffffffff812508a5 ffff8800686f3168 0000000000000007
ffff88006ac8cdfc ffff8800665ea500 0000000041b58ab3 ffffffff847b5480
ffffffff819eac60 ffff88006b9e0860 ffff88006b9e0868 ffff88006b9e07f0
Call Trace:
[<ffffffff819c8dd5>] security_sock_rcv_skb+0x75/0xb0 security/security.c:1317
[<ffffffff82c2a9e7>] sk_filter_trim_cap+0x67/0x10e0 net/core/filter.c:81
[<ffffffff82b81e60>] __sk_receive_skb+0x30/0xa00 net/core/sock.c:460
[<ffffffff838bbf12>] dccp_v4_rcv+0xdb2/0x1910 net/dccp/ipv4.c:873
[<ffffffff83069d22>] ip_local_deliver_finish+0x332/0xad0
net/ipv4/ip_input.c:216
[< inline >] NF_HOOK_THRESH ./include/linux/netfilter.h:232
[< inline >] NF_HOOK ./include/linux/netfilter.h:255
[<ffffffff8306abd2>] ip_local_deliver+0x1c2/0x4b0 net/ipv4/ip_input.c:257
[< inline >] dst_input ./include/net/dst.h:507
[<ffffffff83068500>] ip_rcv_finish+0x750/0x1c40 net/ipv4/ip_input.c:396
[< inline >] NF_HOOK_THRESH ./include/linux/netfilter.h:232
[< inline >] NF_HOOK ./include/linux/netfilter.h:255
[<ffffffff8306b82f>] ip_rcv+0x96f/0x12f0 net/ipv4/ip_input.c:487
[<ffffffff82bd9fb7>] __netif_receive_skb_core+0x1897/0x2a50 net/core/dev.c:4213
[<ffffffff82bdb19a>] __netif_receive_skb+0x2a/0x170 net/core/dev.c:4251
[<ffffffff82bdb493>] netif_receive_skb_internal+0x1b3/0x390 net/core/dev.c:4279
[<ffffffff82bdb6b8>] netif_receive_skb+0x48/0x250 net/core/dev.c:4303
[<ffffffff8241fc75>] tun_get_user+0xbd5/0x28a0 drivers/net/tun.c:1308
[<ffffffff82421b5a>] tun_chr_write_iter+0xda/0x190 drivers/net/tun.c:1332
[< inline >] new_sync_write fs/read_write.c:499
[<ffffffff8151bd44>] __vfs_write+0x334/0x570 fs/read_write.c:512
[<ffffffff8151f85b>] vfs_write+0x17b/0x500 fs/read_write.c:560
[< inline >] SYSC_write fs/read_write.c:607
[<ffffffff81523184>] SyS_write+0xd4/0x1a0 fs/read_write.c:599
[<ffffffff83fc02c1>] entry_SYSCALL_64_fastpath+0x1f/0xc2
It turns out DCCP calls __sk_receive_skb(), and this broke when
lookups no longer took a reference on listeners.
Fix this issue by adding a @refcounted parameter to __sk_receive_skb(),
so that sock_put() is used only when needed.
Fixes: 3b24d854cb35 ("tcp/dccp: do not touch listener sk_refcnt under synflood")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
After my commit, tcp_sendmsg() might restart its loop after
processing socket backlog.
If sk_err is set, we blindly return an error, even though we
copied data to user space before.
We should instead return number of bytes that could be copied,
otherwise user space might resend data and corrupt the stream.
This might happen if another thread is using recvmsg(MSG_ERRQUEUE)
to process timestamps.
Issue was diagnosed by Soheil and Willem, big kudos to them !
Fixes: d41a69f1d390f ("tcp: make tcp_sendmsg() aware of socket backlog")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Tested-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Some configurations (e.g. geneve interface with default
MTU of 1500 over an ethernet interface with 1500 MTU) result
in the transmission of packets that exceed the configured MTU.
While this should be considered to be a "bad" configuration,
it is still allowed and should not result in the sending
of packets that exceed the configured MTU.
Fix by dropping the assumption in ip_finish_output_gso() that
locally originated gso packets will never need fragmentation.
Basic testing using iperf (observing CPU usage and bandwidth)
have shown no measurable performance impact for traffic not
requiring fragmentation.
Fixes: c7ba65d7b649 ("net: ip: push gso skb forwarding handling down the stack")
Reported-by: Jan Tluka <jtluka@redhat.com>
Signed-off-by: Lance Richardson <lrichard@redhat.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Imagine initial value of max_skb_frags is 17, and last
skb in write queue has 15 frags.
Then max_skb_frags is lowered to 14 or smaller value.
tcp_sendmsg() will then be allowed to add additional page frags
and eventually go past MAX_SKB_FRAGS, overflowing struct
skb_shared_info.
Fixes: 5f74f82ea34c ("net:Add sysctl_max_skb_frags")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Hans Westgaard Ry <hans.westgaard.ry@oracle.com>
Cc: Håkon Bugge <haakon.bugge@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Andrey reported this kernel warning:
WARNING: CPU: 0 PID: 4608 at kernel/sched/core.c:7724
__might_sleep+0x14c/0x1a0 kernel/sched/core.c:7719
do not call blocking ops when !TASK_RUNNING; state=1 set at
[<ffffffff811f5a5c>] prepare_to_wait+0xbc/0x210
kernel/sched/wait.c:178
Modules linked in:
CPU: 0 PID: 4608 Comm: syz-executor Not tainted 4.9.0-rc2+ #320
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
ffff88006625f7a0 ffffffff81b46914 ffff88006625f818 0000000000000000
ffffffff84052960 0000000000000000 ffff88006625f7e8 ffffffff81111237
ffff88006aceac00 ffffffff00001e2c ffffed000cc4beff ffffffff84052960
Call Trace:
[< inline >] __dump_stack lib/dump_stack.c:15
[<ffffffff81b46914>] dump_stack+0xb3/0x10f lib/dump_stack.c:51
[<ffffffff81111237>] __warn+0x1a7/0x1f0 kernel/panic.c:550
[<ffffffff8111132c>] warn_slowpath_fmt+0xac/0xd0 kernel/panic.c:565
[<ffffffff811922fc>] __might_sleep+0x14c/0x1a0 kernel/sched/core.c:7719
[< inline >] slab_pre_alloc_hook mm/slab.h:393
[< inline >] slab_alloc_node mm/slub.c:2634
[< inline >] slab_alloc mm/slub.c:2716
[<ffffffff81508da0>] __kmalloc_track_caller+0x150/0x2a0 mm/slub.c:4240
[<ffffffff8146be14>] kmemdup+0x24/0x50 mm/util.c:113
[<ffffffff8388b2cf>] dccp_feat_clone_sp_val.part.5+0x4f/0xe0 net/dccp/feat.c:374
[< inline >] dccp_feat_clone_sp_val net/dccp/feat.c:1141
[< inline >] dccp_feat_change_recv net/dccp/feat.c:1141
[<ffffffff8388d491>] dccp_feat_parse_options+0xaa1/0x13d0 net/dccp/feat.c:1411
[<ffffffff83894f01>] dccp_parse_options+0x721/0x1010 net/dccp/options.c:128
[<ffffffff83891280>] dccp_rcv_state_process+0x200/0x15b0 net/dccp/input.c:644
[<ffffffff838b8a94>] dccp_v4_do_rcv+0xf4/0x1a0 net/dccp/ipv4.c:681
[< inline >] sk_backlog_rcv ./include/net/sock.h:872
[<ffffffff82b7ceb6>] __release_sock+0x126/0x3a0 net/core/sock.c:2044
[<ffffffff82b7d189>] release_sock+0x59/0x1c0 net/core/sock.c:2502
[< inline >] inet_wait_for_connect net/ipv4/af_inet.c:547
[<ffffffff8316b2a2>] __inet_stream_connect+0x5d2/0xbb0 net/ipv4/af_inet.c:617
[<ffffffff8316b8d5>] inet_stream_connect+0x55/0xa0 net/ipv4/af_inet.c:656
[<ffffffff82b705e4>] SYSC_connect+0x244/0x2f0 net/socket.c:1533
[<ffffffff82b72dd4>] SyS_connect+0x24/0x30 net/socket.c:1514
[<ffffffff83fbf701>] entry_SYSCALL_64_fastpath+0x1f/0xc2
arch/x86/entry/entry_64.S:209
Unlike commit 26cabd31259ba43f68026ce3f62b78094124333f
("sched, net: Clean up sk_wait_event() vs. might_sleep()"), the
sleeping function is called before schedule_timeout(), this is indeed
a bug. Fix this by moving the wait logic to the new API, it is similar
to commit ff960a731788a7408b6f66ec4fd772ff18833211
("netdev, sched/wait: Fix sleeping inside wait event").
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Some IPCB fields are currently set in udp_tunnel6_xmit_skb(), which are
never used before it reaches ip6tunnel_xmit(), and past that point the
control buffer is no longer interpreted as IPCB.
This clears these unused IPCB related codes. Currently there is no skb
scrubbing in ip6_udp_tunnel, otherwise IPCB(skb)->opt might need to be
cleared for IPv4 packets, as shown in 5146d1f1511
("tunnel: Clear IPCB(skb)->opt before dst_link_failure called").
Signed-off-by: Eli Cooper <elicooper@gmx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Abstract unix domain socket may embed null characters,
these should be translated to '@' when printed out to
proc the same way the null prefix is currently being
translated.
This helps for tools such as netstat, lsof and the proc
based implementation in ss to show all the significant
bytes of the name (instead of getting cut at the first
null occurrence).
Signed-off-by: Isaac Boukris <iboukris@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2016-10-31
this is a pull request of two patches for the upcoming v4.9 release.
The first patch is by Lukas Resch for the sja1000 plx_pci driver that adds
support for Moxa CAN devices. The second patch is by Oliver Hartkopp and fixes
a potential kernel panic in the CAN broadcast manager.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Prior to this patch, in rx path, before calling lock_sock, it needed to
hold assoc when got it by __sctp_lookup_association, in case other place
would free/put assoc.
But in __sctp_lookup_association, it lookup and hold transport, then got
assoc by transport->assoc, then hold assoc and put transport. It means
it didn't hold transport, yet it was returned and later on directly
assigned to chunk->transport.
Without the protection of sock lock, the transport may be freed/put by
other places, which would cause a use-after-free issue.
This patch is to fix this issue by holding transport instead of assoc.
As holding transport can make sure to access assoc is also safe, and
actually it looks up assoc by searching transport rhashtable, to hold
transport here makes more sense.
Note that the function will be renamed later on on another patch.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Prior to this patch, it used a local variable to save the transport that is
looked up by __sctp_lookup_association(), and didn't return it back. But in
sctp_rcv, it is used to initialize chunk->transport. So when hitting this,
even if it found the transport, it was still initializing chunk->transport
with null instead.
This patch is to return the transport back through transport pointer
that is from __sctp_rcv_lookup_harder().
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In sctp_transport_lookup_process(), Commit 1cceda784980 ("sctp: fix
the issue sctp_diag uses lock_sock in rcu_read_lock") moved cb() out
of rcu lock, but it put transport and hold assoc instead, and ignore
that cb() still uses transport. It may cause a use-after-free issue.
This patch is to hold transport instead of assoc there.
Fixes: 1cceda784980 ("sctp: fix the issue sctp_diag uses lock_sock in rcu_read_lock")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Andrey Konovalov reported an issue with proc_register in bcm.c.
As suggested by Cong Wang this patch adds a lock_sock() protection and
a check for unsuccessful proc_create_data() in bcm_connect().
Reference: http://marc.info/?l=linux-netdev&m=147732648731237
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Suggested-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Sending zero checksum is ok for TCP, but not for UDP.
UDPv6 receiver should by default drop a frame with a 0 checksum,
and UDPv4 would not verify the checksum and might accept a corrupted
packet.
Simply replace such checksum by 0xffff, regardless of transport.
This error was caught on SIT tunnels, but seems generic.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Maciej Żenczykowski <maze@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Acked-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
At accept() time, it is possible the parent has a non zero
sk_err_soft, leftover from a prior error.
Make sure we do not leave this value in the child, as it
makes future getsockopt(SO_ERROR) calls quite unreliable.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If a congestion control module doesn't provide .undo_cwnd function,
tcp_undo_cwnd_reduction() will set cwnd to
tp->snd_cwnd = max(tp->snd_cwnd, tp->snd_ssthresh << 1);
... which makes sense for reno (it sets ssthresh to half the current cwnd),
but it makes no sense for dctcp, which sets ssthresh based on the current
congestion estimate.
This can cause severe growth of cwnd (eventually overflowing u32).
Fix this by saving last cwnd on loss and restore cwnd based on that,
similar to cubic and other algorithms.
Fixes: e3118e8359bb7c ("net: tcp: add DCTCP congestion control algorithm")
Cc: Lawrence Brakmo <brakmo@fb.com>
Cc: Andrew Shewmaker <agshew@gmail.com>
Cc: Glenn Judd <glenn.judd@morganstanley.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Prior to this patch, ipv6 didn't do mtu lock check in ip6_update_pmtu.
It leaded to that mtu lock doesn't really work when receiving the pkt
of ICMPV6_PKT_TOOBIG.
This patch is to add mtu lock check in __ip6_rt_update_pmtu just as ipv4
did in __ip_rt_update_pmtu.
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Similar to commit c146066ab802 ("ipv4: Don't use ufo handling on later
transformed packets"), don't perform UFO on packets that will be IPsec
transformed. To detect it we rely on the fact that headerlen in
dst_entry is non-zero only for transformation bundles (xfrm_dst
objects).
Unwanted segmentation can be observed with a NETIF_F_UFO capable device,
such as a dummy device:
DEV=dum0 LEN=1493
ip li add $DEV type dummy
ip addr add fc00::1/64 dev $DEV nodad
ip link set $DEV up
ip xfrm policy add dir out src fc00::1 dst fc00::2 \
tmpl src fc00::1 dst fc00::2 proto esp spi 1
ip xfrm state add src fc00::1 dst fc00::2 \
proto esp spi 1 enc 'aes' 0x0b0b0b0b0b0b0b0b0b0b0b0b0b0b0b0b
tcpdump -n -nn -i $DEV -t &
socat /dev/zero,readbytes=$LEN udp6:[fc00::2]:$LEN
tcpdump output before:
IP6 fc00::1 > fc00::2: frag (0|1448) ESP(spi=0x00000001,seq=0x1), length 1448
IP6 fc00::1 > fc00::2: frag (1448|48)
IP6 fc00::1 > fc00::2: ESP(spi=0x00000001,seq=0x2), length 88
... and after:
IP6 fc00::1 > fc00::2: frag (0|1448) ESP(spi=0x00000001,seq=0x1), length 1448
IP6 fc00::1 > fc00::2: frag (1448|80)
Fixes: e89e9cf539a2 ("[IPv4/IPv6]: UFO Scatter-gather approach")
Signed-off-by: Jakub Sitnicki <jkbs@redhat.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The NFTA_DUP_SREG_DEV attribute is not a must option, so we should use it
in routing lookup only when the user specify it.
Fixes: d877f07112f1 ("netfilter: nf_tables: add nft_dup expression")
Signed-off-by: Liping Zhang <zlpnobody@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
When the memory is exhausted, then we will fail to add the NFT_MSG_NEWSET
transaction. In such case, we should destroy the set before we free it.
Fixes: 958bee14d071 ("netfilter: nf_tables: use new transaction infrastructure to handle sets")
Signed-off-by: Liping Zhang <zlpnobody@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Pull networking fixes from David Miller:
"Lots of fixes, mostly drivers as is usually the case.
1) Don't treat zero DMA address as invalid in vmxnet3, from Alexey
Khoroshilov.
2) Fix element timeouts in netfilter's nft_dynset, from Anders K.
Pedersen.
3) Don't put aead_req crypto struct on the stack in mac80211, from
Ard Biesheuvel.
4) Several uninitialized variable warning fixes from Arnd Bergmann.
5) Fix memory leak in cxgb4, from Colin Ian King.
6) Fix bpf handling of VLAN header push/pop, from Daniel Borkmann.
7) Several VRF semantic fixes from David Ahern.
8) Set skb->protocol properly in ip6_tnl_xmit(), from Eli Cooper.
9) Socket needs to be locked in udp_disconnect(), from Eric Dumazet.
10) Div-by-zero on 32-bit fix in mlx4 driver, from Eugenia Emantayev.
11) Fix stale link state during failover in NCSCI driver, from Gavin
Shan.
12) Fix netdev lower adjacency list traversal, from Ido Schimmel.
13) Propvide proper handle when emitting notifications of filter
deletes, from Jamal Hadi Salim.
14) Memory leaks and big-endian issues in rtl8xxxu, from Jes Sorensen.
15) Fix DESYNC_FACTOR handling in ipv6, from Jiri Bohac.
16) Several routing offload fixes in mlxsw driver, from Jiri Pirko.
17) Fix broadcast sync problem in TIPC, from Jon Paul Maloy.
18) Validate chunk len before using it in SCTP, from Marcelo Ricardo
Leitner.
19) Revert a netns locking change that causes regressions, from Paul
Moore.
20) Add recursion limit to GRO handling, from Sabrina Dubroca.
21) GFP_KERNEL in irq context fix in ibmvnic, from Thomas Falcon.
22) Avoid accessing stale vxlan/geneve socket in data path, from
Pravin Shelar"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (189 commits)
geneve: avoid using stale geneve socket.
vxlan: avoid using stale vxlan socket.
qede: Fix out-of-bound fastpath memory access
net: phy: dp83848: add dp83822 PHY support
enic: fix rq disable
tipc: fix broadcast link synchronization problem
ibmvnic: Fix missing brackets in init_sub_crq_irqs
ibmvnic: Fix releasing of sub-CRQ IRQs in interrupt context
Revert "ibmvnic: Fix releasing of sub-CRQ IRQs in interrupt context"
arch/powerpc: Update parameters for csum_tcpudp_magic & csum_tcpudp_nofold
net/mlx4_en: Save slave ethtool stats command
net/mlx4_en: Fix potential deadlock in port statistics flow
net/mlx4: Fix firmware command timeout during interrupt test
net/mlx4_core: Do not access comm channel if it has not yet been initialized
net/mlx4_en: Fix panic during reboot
net/mlx4_en: Process all completions in RX rings after port goes up
net/mlx4_en: Resolve dividing by zero in 32-bit system
net/mlx4_core: Change the default value of enable_qos
net/mlx4_core: Avoid setting ports to auto when only one port type is supported
net/mlx4_core: Fix the resource-type enum in res tracker to conform to FW spec
...
|
|
In commit 2d18ac4ba745 ("tipc: extend broadcast link initialization
criteria") we tried to fix a problem with the initial synchronization
of broadcast link acknowledge values. Unfortunately that solution is
not sufficient to solve the issue.
We have seen it happen that LINK_PROTOCOL/STATE packets with a valid
non-zero unicast acknowledge number may bypass BCAST_PROTOCOL
initialization, NAME_DISTRIBUTOR and other STATE packets with invalid
broadcast acknowledge numbers, leading to premature opening of the
broadcast link. When the bypassed packets finally arrive, they are
inadvertently accepted, and the already correctly initialized
acknowledge number in the broadcast receive link is overwritten by
the invalid (zero) value of the said packets. After this the broadcast
link goes stale.
We now fix this by marking the packets where we know the acknowledge
value is or may be invalid, and then ignoring the acks from those.
To this purpose, we claim an unused bit in the header to indicate that
the value is invalid. We set the bit to 1 in the initial BCAST_PROTOCOL
synchronization packet and all initial ("bulk") NAME_DISTRIBUTOR
packets, plus those LINK_PROTOCOL packets sent out before the broadcast
links are fully synchronized.
This minor protocol update is fully backwards compatible.
Reported-by: John Thompson <thompa.atl@gmail.com>
Tested-by: John Thompson <thompa.atl@gmail.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
rds use Kconfig option called "RDS_DEBUG" to enable rds debug messages.
This option cause the rds Makefile to add -DDEBUG to the rds gcc command
line.
When CONFIG_DYNAMIC_DEBUG is enabled, the "DEBUG" macro is used by
include/linux/dynamic_debug.h to decide if dynamic debug prints should
be sent by default to the kernel log.
rds should not enable this macro for production builds. rds dynamic
debug work as expected follow this fix.
Signed-off-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Reviewed-by: Wengang Wang <wen.gang.wang@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
Just two fixes:
* a fix to process all events while suspending, so any
potential calls into the driver are done before it is
suspended
* small markup fixes for the sphinx documentation conversion
that's coming into the tree via the doc tree
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Simon Wunderlich says:
====================
Here are three batman-adv bugfix patches:
- Fix RCU usage for neighbor list, by Sven Eckelmann
- Fix BATADV_DBG_ALL loglevel to include TP Meter messages, by Sven Eckelmann
- Fix possible splat when disabling an interface, by Linus Luessing
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When transmitting on a packet socket with PACKET_VNET_HDR and
PACKET_QDISC_BYPASS, validate device support for features requested
in vnet_hdr.
Drop TSO packets sent to devices that do not support TSO or have the
feature disabled. Note that the latter currently do process those
packets correctly, regardless of not advertising the feature.
Because of SKB_GSO_DODGY, it is not sufficient to test device features
with netif_needs_gso. Full validate_xmit_skb is needed.
Switch to software checksum for non-TSO packets that request checksum
offload if that device feature is unsupported or disabled. Note that
similar to the TSO case, device drivers may perform checksum offload
correctly even when not advertising it.
When switching to software checksum, packets hit skb_checksum_help,
which has two BUG_ON checksum not in linear segment. Packet sockets
always allocate at least up to csum_start + csum_off + 2 as linear.
Tested by running github.com/wdebruij/kerneltools/psock_txring_vnet.c
ethtool -K eth0 tso off tx on
psock_txring_vnet -d $dst -s $src -i eth0 -l 2000 -n 1 -q -v
psock_txring_vnet -d $dst -s $src -i eth0 -l 2000 -n 1 -q -v -N
ethtool -K eth0 tx off
psock_txring_vnet -d $dst -s $src -i eth0 -l 1000 -n 1 -q -v -G
psock_txring_vnet -d $dst -s $src -i eth0 -l 1000 -n 1 -q -v -G -N
v2:
- add EXPORT_SYMBOL_GPL(validate_xmit_skb_list)
Fixes: d346a3fae3ff ("packet: introduce PACKET_QDISC_BYPASS socket option")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use nla_parse_nested instead of open-coding the call to
nla_parse() with the attribute data/len.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch updates skb->protocol to ETH_P_IPV6 in ip6_tnl_xmit() when an
IPv6 header is installed to a socket buffer.
This is not a cosmetic change. Without updating this value, GSO packets
transmitted through an ipip6 tunnel have the protocol of ETH_P_IP and
skb_mac_gso_segment() will attempt to call gso_segment() for IPv4,
which results in the packets being dropped.
Fixes: b8921ca83eed ("ip4ip6: Support for GSO/GRO")
Signed-off-by: Eli Cooper <elicooper@gmx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
