summaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)Author
2016-07-29Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull userns vfs updates from Eric Biederman: "This tree contains some very long awaited work on generalizing the user namespace support for mounting filesystems to include filesystems with a backing store. The real world target is fuse but the goal is to update the vfs to allow any filesystem to be supported. This patchset is based on a lot of code review and testing to approach that goal. While looking at what is needed to support the fuse filesystem it became clear that there were things like xattrs for security modules that needed special treatment. That the resolution of those concerns would not be fuse specific. That sorting out these general issues made most sense at the generic level, where the right people could be drawn into the conversation, and the issues could be solved for everyone. At a high level what this patchset does a couple of simple things: - Add a user namespace owner (s_user_ns) to struct super_block. - Teach the vfs to handle filesystem uids and gids not mapping into to kuids and kgids and being reported as INVALID_UID and INVALID_GID in vfs data structures. By assigning a user namespace owner filesystems that are mounted with only user namespace privilege can be detected. This allows security modules and the like to know which mounts may not be trusted. This also allows the set of uids and gids that are communicated to the filesystem to be capped at the set of kuids and kgids that are in the owning user namespace of the filesystem. One of the crazier corner casees this handles is the case of inodes whose i_uid or i_gid are not mapped into the vfs. Most of the code simply doesn't care but it is easy to confuse the inode writeback path so no operation that could cause an inode write-back is permitted for such inodes (aka only reads are allowed). This set of changes starts out by cleaning up the code paths involved in user namespace permirted mounts. Then when things are clean enough adds code that cleanly sets s_user_ns. Then additional restrictions are added that are possible now that the filesystem superblock contains owner information. These changes should not affect anyone in practice, but there are some parts of these restrictions that are changes in behavior. - Andy's restriction on suid executables that does not honor the suid bit when the path is from another mount namespace (think /proc/[pid]/fd/) or when the filesystem was mounted by a less privileged user. - The replacement of the user namespace implicit setting of MNT_NODEV with implicitly setting SB_I_NODEV on the filesystem superblock instead. Using SB_I_NODEV is a stronger form that happens to make this state user invisible. The user visibility can be managed but it caused problems when it was introduced from applications reasonably expecting mount flags to be what they were set to. There is a little bit of work remaining before it is safe to support mounting filesystems with backing store in user namespaces, beyond what is in this set of changes. - Verifying the mounter has permission to read/write the block device during mount. - Teaching the integrity modules IMA and EVM to handle filesystems mounted with only user namespace root and to reduce trust in their security xattrs accordingly. - Capturing the mounters credentials and using that for permission checks in d_automount and the like. (Given that overlayfs already does this, and we need the work in d_automount it make sense to generalize this case). Furthermore there are a few changes that are on the wishlist: - Get all filesystems supporting posix acls using the generic posix acls so that posix_acl_fix_xattr_from_user and posix_acl_fix_xattr_to_user may be removed. [Maintainability] - Reducing the permission checks in places such as remount to allow the superblock owner to perform them. - Allowing the superblock owner to chown files with unmapped uids and gids to something that is mapped so the files may be treated normally. I am not considering even obvious relaxations of permission checks until it is clear there are no more corner cases that need to be locked down and handled generically. Many thanks to Seth Forshee who kept this code alive, and putting up with me rewriting substantial portions of what he did to handle more corner cases, and for his diligent testing and reviewing of my changes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (30 commits) fs: Call d_automount with the filesystems creds fs: Update i_[ug]id_(read|write) to translate relative to s_user_ns evm: Translate user/group ids relative to s_user_ns when computing HMAC dquot: For now explicitly don't support filesystems outside of init_user_ns quota: Handle quota data stored in s_user_ns in quota_setxquota quota: Ensure qids map to the filesystem vfs: Don't create inodes with a uid or gid unknown to the vfs vfs: Don't modify inodes with a uid or gid unknown to the vfs cred: Reject inodes with invalid ids in set_create_file_as() fs: Check for invalid i_uid in may_follow_link() vfs: Verify acls are valid within superblock's s_user_ns. userns: Handle -1 in k[ug]id_has_mapping when !CONFIG_USER_NS fs: Refuse uid/gid changes which don't map into s_user_ns selinux: Add support for unprivileged mounts from user namespaces Smack: Handle labels consistently in untrusted mounts Smack: Add support for unprivileged mounts from user namespaces fs: Treat foreign mounts as nosuid fs: Limit file caps to the user namespace of the super block userns: Remove the now unnecessary FS_USERNS_DEV_MOUNT flag userns: Remove implicit MNT_NODEV fragility. ...
2016-07-28Merge branch 'salted-string-hash'Linus Torvalds
This changes the vfs dentry hashing to mix in the parent pointer at the _beginning_ of the hash, rather than at the end. That actually improves both the hash and the code generation, because we can move more of the computation to the "static" part of the dcache setup, and do less at lookup runtime. It turns out that a lot of other hash users also really wanted to mix in a base pointer as a 'salt' for the hash, and so the slightly extended interface ends up working well for other cases too. Users that want a string hash that is purely about the string pass in a 'salt' pointer of NULL. * merge branch 'salted-string-hash': fs/dcache.c: Save one 32-bit multiply in dcache lookup vfs: make the string hashes salt the hash
2016-07-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: 1) Unified UDP encapsulation offload methods for drivers, from Alexander Duyck. 2) Make DSA binding more sane, from Andrew Lunn. 3) Support QCA9888 chips in ath10k, from Anilkumar Kolli. 4) Several workqueue usage cleanups, from Bhaktipriya Shridhar. 5) Add XDP (eXpress Data Path), essentially running BPF programs on RX packets as soon as the device sees them, with the option to mirror the packet on TX via the same interface. From Brenden Blanco and others. 6) Allow qdisc/class stats dumps to run lockless, from Eric Dumazet. 7) Add VLAN support to b53 and bcm_sf2, from Florian Fainelli. 8) Simplify netlink conntrack entry layout, from Florian Westphal. 9) Add ipv4 forwarding support to mlxsw spectrum driver, from Ido Schimmel, Yotam Gigi, and Jiri Pirko. 10) Add SKB array infrastructure and convert tun and macvtap over to it. From Michael S Tsirkin and Jason Wang. 11) Support qdisc packet injection in pktgen, from John Fastabend. 12) Add neighbour monitoring framework to TIPC, from Jon Paul Maloy. 13) Add NV congestion control support to TCP, from Lawrence Brakmo. 14) Add GSO support to SCTP, from Marcelo Ricardo Leitner. 15) Allow GRO and RPS to function on macsec devices, from Paolo Abeni. 16) Support MPLS over IPV4, from Simon Horman. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1622 commits) xgene: Fix build warning with ACPI disabled. be2net: perform temperature query in adapter regardless of its interface state l2tp: Correctly return -EBADF from pppol2tp_getname. net/mlx5_core/health: Remove deprecated create_singlethread_workqueue net: ipmr/ip6mr: update lastuse on entry change macsec: ensure rx_sa is set when validation is disabled tipc: dump monitor attributes tipc: add a function to get the bearer name tipc: get monitor threshold for the cluster tipc: make cluster size threshold for monitoring configurable tipc: introduce constants for tipc address validation net: neigh: disallow transition to NUD_STALE if lladdr is unchanged in neigh_update() MAINTAINERS: xgene: Add driver and documentation path Documentation: dtb: xgene: Add MDIO node dtb: xgene: Add MDIO node drivers: net: xgene: ethtool: Use phy_ethtool_gset and sset drivers: net: xgene: Use exported functions drivers: net: xgene: Enable MDIO driver drivers: net: xgene: Add backward compatibility drivers: net: phy: xgene: Add MDIO driver ...
2016-07-27Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge updates from Andrew Morton: - a few misc bits - ocfs2 - most(?) of MM * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (125 commits) thp: fix comments of __pmd_trans_huge_lock() cgroup: remove unnecessary 0 check from css_from_id() cgroup: fix idr leak for the first cgroup root mm: memcontrol: fix documentation for compound parameter mm: memcontrol: remove BUG_ON in uncharge_list mm: fix build warnings in <linux/compaction.h> mm, thp: convert from optimistic swapin collapsing to conservative mm, thp: fix comment inconsistency for swapin readahead functions thp: update Documentation/{vm/transhuge,filesystems/proc}.txt shmem: split huge pages beyond i_size under memory pressure thp: introduce CONFIG_TRANSPARENT_HUGE_PAGECACHE khugepaged: add support of collapse for tmpfs/shmem pages shmem: make shmem_inode_info::lock irq-safe khugepaged: move up_read(mmap_sem) out of khugepaged_alloc_page() thp: extract khugepaged from mm/huge_memory.c shmem, thp: respect MADV_{NO,}HUGEPAGE for file mappings shmem: add huge pages support shmem: get_unmapped_area align huge page shmem: prepare huge= mount option and sysfs knob mm, rmap: account shmem thp pages ...
2016-07-26af_unix: charge buffers to kmemcgVladimir Davydov
Unix sockets can consume a significant amount of system memory, hence they should be accounted to kmemcg. Since unix socket buffers are always allocated from process context, all we need to do to charge them to kmemcg is set __GFP_ACCOUNT in sock->sk_allocation mask. Eric asked: > 1) What happens when a buffer, allocated from socket <A> lands in a > different socket <B>, maybe owned by another user/process. > > Who owns it now, in term of kmemcg accounting ? We never move memcg charges. E.g. if two processes from different cgroups are sharing a memory region, each page will be charged to the process which touched it first. Or if two processes are working with the same directory tree, inodes and dentries will be charged to the first user. The same is fair for unix socket buffers - they will be charged to the sender. > 2) Has performance impact been evaluated ? I ran netperf STREAM_STREAM with default options in a kmemcg on a 4 core x2 HT box. The results are below: # clients bandwidth (10^6bits/sec) base patched 1 67643 +- 725 64874 +- 353 - 4.0 % 4 193585 +- 2516 186715 +- 1460 - 3.5 % 8 194820 +- 377 187443 +- 1229 - 3.7 % So the accounting doesn't come for free - it takes ~4% of performance. I believe we could optimize it by using per cpu batching not only on charge, but also on uncharge in memcg core, but that's beyond the scope of this patch set - I'll take a look at this later. Anyway, if performance impact is found to be unacceptable, it is always possible to disable kmem accounting at boot time (cgroup.memory=nokmem) or not use memory cgroups at runtime at all (thanks to jump labels there'll be no overhead even if they are compiled in). Link: http://lkml.kernel.org/r/fcfe6cae27a59fbc5e40145664b3cf085a560c68.1464079538.git.vdavydov@virtuozzo.com Signed-off-by: Vladimir Davydov <vdavydov@virtuozzo.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-26l2tp: Correctly return -EBADF from pppol2tp_getname.phil.turnbull@oracle.com
If 'tunnel' is NULL we should return -EBADF but the 'end_put_sess' path unconditionally sets 'error' back to zero. Rework the error path so it more closely matches pppol2tp_sendmsg. Fixes: fd558d186df2 ("l2tp: Split pppol2tp patch into separate l2tp and ppp parts") Signed-off-by: Phil Turnbull <phil.turnbull@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-26net: ipmr/ip6mr: update lastuse on entry changeNikolay Aleksandrov
Currently lastuse is updated on entry creation and cache hit, but it should also be updated on entry change. Since both on add and update the ttl array is updated we can simply update the lastuse in ipmr_update_thresholds. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> CC: Roopa Prabhu <roopa@cumulusnetworks.com> CC: Donald Sharp <sharpd@cumulusnetworks.com> CC: David S. Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-26tipc: dump monitor attributesParthasarathy Bhuvaragan
In this commit, we dump the monitor attributes when queried. The link monitor attributes are separated into two kinds: 1. general attributes per bearer 2. specific attributes per node/peer This style resembles the socket attributes and the nametable publications per socket. Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-26tipc: add a function to get the bearer nameParthasarathy Bhuvaragan
Introduce a new function to get the bearer name from its id. This is used in subsequent commit. Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-26tipc: get monitor threshold for the clusterParthasarathy Bhuvaragan
In this commit, we add support to fetch the configured cluster monitoring threshold. Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-26tipc: make cluster size threshold for monitoring configurableParthasarathy Bhuvaragan
In this commit, we introduce support to configure the minimum threshold to activate the new link monitoring algorithm. Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-26tipc: introduce constants for tipc address validationParthasarathy Bhuvaragan
In this commit, we introduce defines for tipc address size, offset and mask specification for Zone.Cluster.Node. There is no functional change in this commit. Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-26net: neigh: disallow transition to NUD_STALE if lladdr is unchanged in ↵He Chunhui
neigh_update() NUD_STALE is used when the caller(e.g. arp_process()) can't guarantee neighbour reachability. If the entry was NUD_VALID and lladdr is unchanged, the entry state should not be changed. Currently the code puts an extra "NUD_CONNECTED" condition. So if old state was NUD_DELAY or NUD_PROBE (they are NUD_VALID but not NUD_CONNECTED), the state can be changed to NUD_STALE. This may cause problem. Because NUD_STALE lladdr doesn't guarantee reachability, when we send traffic, the state will be changed to NUD_DELAY. In normal case, if we get no confirmation (by dst_confirm()), we will change the state to NUD_PROBE and send probe traffic. But now the state may be reset to NUD_STALE again(e.g. by broadcast ARP packets), so the probe traffic will not be sent. This situation may happen again and again, and packets will be sent to an non-reachable lladdr forever. The fix is to remove the "NUD_CONNECTED" condition. After that the "NEIGH_UPDATE_F_WEAK_OVERRIDE" condition (used by IPv6) in that branch will be redundant, so remove it. This change may increase probe traffic, but it's essential since NUD_STALE lladdr is unreliable. To ensure correctness, we prefer to resolve lladdr, when we can't get confirmation, even while remote packets try to set NUD_STALE state. Signed-off-by: Chunhui He <hchunhui@mail.ustc.edu.cn> Signed-off-by: Julian Anastasov <ja@ssi.bg> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-26Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Martin Schwidefsky: "There are a couple of new things for s390 with this merge request: - a new scheduling domain "drawer" is added to reflect the unusual topology found on z13 machines. Performance tests showed up to 8 percent gain with the additional domain. - the new crc-32 checksum crypto module uses the vector-galois-field multiply and sum SIMD instruction to speed up crc-32 and crc-32c. - proper __ro_after_init support, this requires RO_AFTER_INIT_DATA in the generic vmlinux.lds linker script definitions. - kcov instrumentation support. A prerequisite for that is the inline assembly basic block cleanup, which is the reason for the net/iucv/iucv.c change. - support for 2GB pages is added to the hugetlbfs backend. Then there are two removals: - the oprofile hardware sampling support is dead code and is removed. The oprofile user space uses the perf interface nowadays. - the ETR clock synchronization is removed, this has been superseeded be the STP clock synchronization. And it always has been "interesting" code.. And the usual bug fixes and cleanups" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (82 commits) s390/pci: Delete an unnecessary check before the function call "pci_dev_put" s390/smp: clean up a condition s390/cio/chp : Remove deprecated create_singlethread_workqueue s390/chsc: improve channel path descriptor determination s390/chsc: sanitize fmt check for chp_desc determination s390/cio: make fmt1 channel path descriptor optional s390/chsc: fix ioctl CHSC_INFO_CU command s390/cio/device_ops: fix kernel doc s390/cio: allow to reset channel measurement block s390/console: Make preferred console handling more consistent s390/mm: fix gmap tlb flush issues s390/mm: add support for 2GB hugepages s390: have unique symbol for __switch_to address s390/cpuinfo: show maximum thread id s390/ptrace: clarify bits in the per_struct s390: stack address vs thread_info s390: remove pointless load within __switch_to s390: enable kcov support s390/cpumf: use basic block for ecctr inline assembly s390/hypfs: use basic block for diag inline assembly ...
2016-07-26net_sched: get rid of struct tcf_commonWANG Cong
After the previous patch, struct tc_action should be enough to represent the generic tc action, tcf_common is not necessary any more. This patch gets rid of it to make tc action code more readable. Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-26net_sched: move tc_action into tcf_commonWANG Cong
struct tc_action is confusing, currently we use it for two purposes: 1) Pass in arguments and carry out results from helper functions 2) A generic representation for tc actions The first one is error-prone, since we need to make sure we don't miss anything. This patch aims to get rid of this use, by moving tc_action into tcf_common, so that they are allocated together in hashtable and can be cast'ed easily. And together with the following patch, we could really make tc_action a generic representation for all tc actions and each type of action can inherit from it. Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-26udp: use sk_filter_trim_cap for udp{,6}_queue_rcv_skbDaniel Borkmann
After a612769774a3 ("udp: prevent bugcheck if filter truncates packet too much"), there followed various other fixes for similar cases such as f4979fcea7fd ("rose: limit sk_filter trim to payload"). Latter introduced a new helper sk_filter_trim_cap(), where we can pass the trim limit directly to the socket filter handling. Make use of it here as well with sizeof(struct udphdr) as lower cap limit and drop the extra skb->len test in UDP's input path. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Willem de Bruijn <willemb@google.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-26Merge branch 'timers-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer updates from Thomas Gleixner: "This update provides the following changes: - The rework of the timer wheel which addresses the shortcomings of the current wheel (cascading, slow search for next expiring timer, etc). That's the first major change of the wheel in almost 20 years since Finn implemted it. - A large overhaul of the clocksource drivers init functions to consolidate the Device Tree initialization - Some more Y2038 updates - A capability fix for timerfd - Yet another clock chip driver - The usual pile of updates, comment improvements all over the place" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (130 commits) tick/nohz: Optimize nohz idle enter clockevents: Make clockevents_subsys static clocksource/drivers/time-armada-370-xp: Fix return value check timers: Implement optimization for same expiry time in mod_timer() timers: Split out index calculation timers: Only wake softirq if necessary timers: Forward the wheel clock whenever possible timers/nohz: Remove pointless tick_nohz_kick_tick() function timers: Optimize collect_expired_timers() for NOHZ timers: Move __run_timers() function timers: Remove set_timer_slack() leftovers timers: Switch to a non-cascading wheel timers: Reduce the CPU index space to 256k timers: Give a few structs and members proper names hlist: Add hlist_is_singular_node() helper signals: Use hrtimer for sigtimedwait() timers: Remove the deprecated mod_timer_pinned() API timers, net/ipv4/inet: Initialize connection request timers as pinned timers, drivers/tty/mips_ejtag: Initialize the poll timer as pinned timers, drivers/tty/metag_da: Initialize the poll timer as pinned ...
2016-07-26net/sctp: terminate rhashtable walk correctlyVegard Nossum
I was seeing a lot of these: BUG: sleeping function called from invalid context at mm/slab.h:388 in_atomic(): 0, irqs_disabled(): 0, pid: 14971, name: trinity-c2 Preemption disabled at:[<ffffffff819bcd46>] rhashtable_walk_start+0x46/0x150 [<ffffffff81149abb>] preempt_count_add+0x1fb/0x280 [<ffffffff83295722>] _raw_spin_lock+0x12/0x40 [<ffffffff811aac87>] console_unlock+0x2f7/0x930 [<ffffffff811ab5bb>] vprintk_emit+0x2fb/0x520 [<ffffffff811aba6a>] vprintk_default+0x1a/0x20 [<ffffffff812c171a>] printk+0x94/0xb0 [<ffffffff811d6ed0>] print_stack_trace+0xe0/0x170 [<ffffffff8115835e>] ___might_sleep+0x3be/0x460 [<ffffffff81158490>] __might_sleep+0x90/0x1a0 [<ffffffff8139b823>] kmem_cache_alloc+0x153/0x1e0 [<ffffffff819bca1e>] rhashtable_walk_init+0xfe/0x2d0 [<ffffffff82ec64de>] sctp_transport_walk_start+0x1e/0x60 [<ffffffff82edd8ad>] sctp_transport_seq_start+0x4d/0x150 [<ffffffff8143a82b>] seq_read+0x27b/0x1180 [<ffffffff814f97fc>] proc_reg_read+0xbc/0x180 [<ffffffff813d471b>] __vfs_read+0xdb/0x610 [<ffffffff813d4d3a>] vfs_read+0xea/0x2d0 [<ffffffff813d615b>] SyS_pread64+0x11b/0x150 [<ffffffff8100334c>] do_syscall_64+0x19c/0x410 [<ffffffff832960a5>] return_from_SYSCALL_64+0x0/0x6a [<ffffffffffffffff>] 0xffffffffffffffff Apparently we always need to call rhashtable_walk_stop(), even when rhashtable_walk_start() fails: * rhashtable_walk_start - Start a hash table walk * @iter: Hash table iterator * * Start a hash table walk. Note that we take the RCU lock in all * cases including when we return an error. So you must always call * rhashtable_walk_stop to clean up. otherwise we never call rcu_read_unlock() and we get the splat above. Fixes: 53fa1036 ("sctp: fix some rhashtable functions using in sctp proc/diag") See-also: 53fa1036 ("sctp: fix some rhashtable functions using in sctp proc/diag") See-also: f2dba9c6 ("rhashtable: Introduce rhashtable_walk_*") Cc: Xin Long <lucien.xin@gmail.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: stable@vger.kernel.org Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-25Merge branch 'locking-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking updates from Ingo Molnar: "The locking tree was busier in this cycle than the usual pattern - a couple of major projects happened to coincide. The main changes are: - implement the atomic_fetch_{add,sub,and,or,xor}() API natively across all SMP architectures (Peter Zijlstra) - add atomic_fetch_{inc/dec}() as well, using the generic primitives (Davidlohr Bueso) - optimize various aspects of rwsems (Jason Low, Davidlohr Bueso, Waiman Long) - optimize smp_cond_load_acquire() on arm64 and implement LSE based atomic{,64}_fetch_{add,sub,and,andnot,or,xor}{,_relaxed,_acquire,_release}() on arm64 (Will Deacon) - introduce smp_acquire__after_ctrl_dep() and fix various barrier mis-uses and bugs (Peter Zijlstra) - after discovering ancient spin_unlock_wait() barrier bugs in its implementation and usage, strengthen its semantics and update/fix usage sites (Peter Zijlstra) - optimize mutex_trylock() fastpath (Peter Zijlstra) - ... misc fixes and cleanups" * 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (67 commits) locking/atomic: Introduce inc/dec variants for the atomic_fetch_$op() API locking/barriers, arch/arm64: Implement LDXR+WFE based smp_cond_load_acquire() locking/static_keys: Fix non static symbol Sparse warning locking/qspinlock: Use __this_cpu_dec() instead of full-blown this_cpu_dec() locking/atomic, arch/tile: Fix tilepro build locking/atomic, arch/m68k: Remove comment locking/atomic, arch/arc: Fix build locking/Documentation: Clarify limited control-dependency scope locking/atomic, arch/rwsem: Employ atomic_long_fetch_add() locking/atomic, arch/qrwlock: Employ atomic_fetch_add_acquire() locking/atomic, arch/mips: Convert to _relaxed atomics locking/atomic, arch/alpha: Convert to _relaxed atomics locking/atomic: Remove the deprecated atomic_{set,clear}_mask() functions locking/atomic: Remove linux/atomic.h:atomic_fetch_or() locking/atomic: Implement atomic{,64,_long}_fetch_{add,sub,and,andnot,or,xor}{,_relaxed,_acquire,_release}() locking/atomic: Fix atomic64_relaxed() bits locking/atomic, arch/xtensa: Implement atomic_fetch_{add,sub,and,or,xor}() locking/atomic, arch/x86: Implement atomic{,64}_fetch_{add,sub,and,or,xor}() locking/atomic, arch/tile: Implement atomic{,64}_fetch_{add,sub,and,or,xor}() locking/atomic, arch/sparc: Implement atomic{,64}_fetch_{add,sub,and,or,xor}() ...
2016-07-25net/irda: fix NULL pointer dereference on memory allocation failureVegard Nossum
I ran into this: kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] PREEMPT SMP KASAN CPU: 2 PID: 2012 Comm: trinity-c3 Not tainted 4.7.0-rc7+ #19 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 task: ffff8800b745f2c0 ti: ffff880111740000 task.ti: ffff880111740000 RIP: 0010:[<ffffffff82bbf066>] [<ffffffff82bbf066>] irttp_connect_request+0x36/0x710 RSP: 0018:ffff880111747bb8 EFLAGS: 00010286 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000069dd8358 RDX: 0000000000000009 RSI: 0000000000000027 RDI: 0000000000000048 RBP: ffff880111747c00 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000069dd8358 R11: 1ffffffff0759723 R12: 0000000000000000 R13: ffff88011a7e4780 R14: 0000000000000027 R15: 0000000000000000 FS: 00007fc738404700(0000) GS:ffff88011af00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fc737fdfb10 CR3: 0000000118087000 CR4: 00000000000006e0 Stack: 0000000000000200 ffff880111747bd8 ffffffff810ee611 ffff880119f1f220 ffff880119f1f4f8 ffff880119f1f4f0 ffff88011a7e4780 ffff880119f1f232 ffff880119f1f220 ffff880111747d58 ffffffff82bca542 0000000000000000 Call Trace: [<ffffffff82bca542>] irda_connect+0x562/0x1190 [<ffffffff825ae582>] SYSC_connect+0x202/0x2a0 [<ffffffff825b4489>] SyS_connect+0x9/0x10 [<ffffffff8100334c>] do_syscall_64+0x19c/0x410 [<ffffffff83295ca5>] entry_SYSCALL64_slow_path+0x25/0x25 Code: 41 89 ca 48 89 e5 41 57 41 56 41 55 41 54 41 89 d7 53 48 89 fb 48 83 c7 48 48 89 fa 41 89 f6 48 c1 ea 03 48 83 ec 20 4c 8b 65 10 <0f> b6 04 02 84 c0 74 08 84 c0 0f 8e 4c 04 00 00 80 7b 48 00 74 RIP [<ffffffff82bbf066>] irttp_connect_request+0x36/0x710 RSP <ffff880111747bb8> ---[ end trace 4cda2588bc055b30 ]--- The problem is that irda_open_tsap() can fail and leave self->tsap = NULL, and then irttp_connect_request() almost immediately dereferences it. Cc: stable@vger.kernel.org Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-25sctp: also point GSO head_skb to the sk when it's availableMarcelo Ricardo Leitner
The head skb for GSO packets won't travel through the inner depths of SCTP stack as it doesn't contain any chunks on it. That means skb->sk doesn't get set and then when sctp_recvmsg() calls sctp_inet6_skb_msgname() on the head_skb it panics, as this last needs to check flags at the socket (sp->v4mapped). The fix is to initialize skb->sk for th head skb once we are able to do it. That is, when the first chunk is processed. Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-25sctp: fix BH handling on socket backlogMarcelo Ricardo Leitner
Now that the backlog processing is called with BH enabled, we have to disable BH before taking the socket lock via bh_lock_sock() otherwise it may dead lock: sctp_backlog_rcv() bh_lock_sock(sk); if (sock_owned_by_user(sk)) { if (sk_add_backlog(sk, skb, sk->sk_rcvbuf)) sctp_chunk_free(chunk); else backloged = 1; } else sctp_inq_push(inqueue, chunk); bh_unlock_sock(sk); while sctp_inq_push() was disabling/enabling BH, but enabling BH triggers pending softirq, which then may try to re-lock the socket in sctp_rcv(). [ 219.187215] <IRQ> [ 219.187217] [<ffffffff817ca3e0>] _raw_spin_lock+0x20/0x30 [ 219.187223] [<ffffffffa041888c>] sctp_rcv+0x48c/0xba0 [sctp] [ 219.187225] [<ffffffff816e7db2>] ? nf_iterate+0x62/0x80 [ 219.187226] [<ffffffff816f1b14>] ip_local_deliver_finish+0x94/0x1e0 [ 219.187228] [<ffffffff816f1e1f>] ip_local_deliver+0x6f/0xf0 [ 219.187229] [<ffffffff816f1a80>] ? ip_rcv_finish+0x3b0/0x3b0 [ 219.187230] [<ffffffff816f17a8>] ip_rcv_finish+0xd8/0x3b0 [ 219.187232] [<ffffffff816f2122>] ip_rcv+0x282/0x3a0 [ 219.187233] [<ffffffff810d8bb6>] ? update_curr+0x66/0x180 [ 219.187235] [<ffffffff816abac4>] __netif_receive_skb_core+0x524/0xa90 [ 219.187236] [<ffffffff810d8e00>] ? update_cfs_shares+0x30/0xf0 [ 219.187237] [<ffffffff810d557c>] ? __enqueue_entity+0x6c/0x70 [ 219.187239] [<ffffffff810dc454>] ? enqueue_entity+0x204/0xdf0 [ 219.187240] [<ffffffff816ac048>] __netif_receive_skb+0x18/0x60 [ 219.187242] [<ffffffff816ad1ce>] process_backlog+0x9e/0x140 [ 219.187243] [<ffffffff816ac8ec>] net_rx_action+0x22c/0x370 [ 219.187245] [<ffffffff817cd352>] __do_softirq+0x112/0x2e7 [ 219.187247] [<ffffffff817cc3bc>] do_softirq_own_stack+0x1c/0x30 [ 219.187247] <EOI> [ 219.187248] [<ffffffff810aa1c8>] do_softirq.part.14+0x38/0x40 [ 219.187249] [<ffffffff810aa24d>] __local_bh_enable_ip+0x7d/0x80 [ 219.187254] [<ffffffffa0408428>] sctp_inq_push+0x68/0x80 [sctp] [ 219.187258] [<ffffffffa04190f1>] sctp_backlog_rcv+0x151/0x1c0 [sctp] [ 219.187260] [<ffffffff81692b07>] __release_sock+0x87/0xf0 [ 219.187261] [<ffffffff81692ba0>] release_sock+0x30/0xa0 [ 219.187265] [<ffffffffa040e46d>] sctp_accept+0x17d/0x210 [sctp] [ 219.187266] [<ffffffff810e7510>] ? prepare_to_wait_event+0xf0/0xf0 [ 219.187268] [<ffffffff8172d52c>] inet_accept+0x3c/0x130 [ 219.187269] [<ffffffff8168d7a3>] SYSC_accept4+0x103/0x210 [ 219.187271] [<ffffffff817ca2ba>] ? _raw_spin_unlock_bh+0x1a/0x20 [ 219.187272] [<ffffffff81692bfc>] ? release_sock+0x8c/0xa0 [ 219.187276] [<ffffffffa0413e22>] ? sctp_inet_listen+0x62/0x1b0 [sctp] [ 219.187277] [<ffffffff8168f2d0>] SyS_accept+0x10/0x20 Fixes: 860fbbc343bf ("sctp: prepare for socket backlog behavior change") Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-25kcm: remove redundant -ve error check and return pathColin Ian King
The check for a -ve error is redundant, remove it and just immediately return the return value from the call to seq_open_net. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-25net: ipv6: Always leave anycast and multicast groups on link downMike Manning
Default kernel behavior is to delete IPv6 addresses on link down, which entails deletion of the multicast and the subnet-router anycast addresses. These deletions do not happen with sysctl setting to keep global IPv6 addresses on link down, so every link down/up causes an increment of the anycast and multicast refcounts. These bogus refcounts may stop these addrs from being removed on subsequent calls to delete them. The solution is to leave the groups for the multicast and subnet anycast on link down for the callflow when global IPv6 addresses are kept. Fixes: f1705ec197e7 ("net: ipv6: Make address flushing on ifdown optional") Signed-off-by: Mike Manning <mmanning@brocade.com> Acked-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-25sctp: use inet_recvmsg to support sctp RFS wellXin Long
Commit 486bdee0134c ("sctp: add support for RPS and RFS") saves skb->hash into sk->sk_rxhash so that the inet_* can record it to flow table. But sctp uses sock_common_recvmsg as .recvmsg instead of inet_recvmsg, sock_common_recvmsg doesn't invoke sock_rps_record_flow to record the flow. It may cause that the receiver has no chances to record the flow if it doesn't send msg or poll the socket. So this patch fixes it by using inet_recvmsg as .recvmsg in sctp. Fixes: 486bdee0134c ("sctp: add support for RPS and RFS") Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-25bridge: Fix incorrect re-injection of LLDP packetsIdo Schimmel
Commit 8626c56c8279 ("bridge: fix potential use-after-free when hook returns QUEUE or STOLEN verdict") caused LLDP packets arriving through a bridge port to be re-injected to the Rx path with skb->dev set to the bridge device, but this breaks the lldpad daemon. The lldpad daemon opens a packet socket with protocol set to ETH_P_LLDP for any valid device on the system, which doesn't not include soft devices such as bridge and VLAN. Since packet sockets (ptype_base) are processed in the Rx path after the Rx handler, LLDP packets with skb->dev set to the bridge device never reach the lldpad daemon. Fix this by making the bridge's Rx handler re-inject LLDP packets with RX_HANDLER_PASS, which effectively restores the behaviour prior to the mentioned commit. This means netfilter will never receive LLDP packets coming through a bridge port, as I don't see a way in which we can have okfn() consume the packet without breaking existing behaviour. I've already carried out a similar fix for STP packets in commit 56fae404fb2c ("bridge: Fix incorrect re-injection of STP packets"). Fixes: 8626c56c8279 ("bridge: fix potential use-after-free when hook returns QUEUE or STOLEN verdict") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Cc: Florian Westphal <fw@strlen.de> Cc: John Fastabend <john.fastabend@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-25sctp: support ipv6 nonlocal bindXin Long
This patch makes sctp support ipv6 nonlocal bind by adding sp->inet.freebind and net->ipv6.sysctl.ip_nonlocal_bind check in sctp_v6_available as what sctp did to support ipv4 nonlocal bind (commit cdac4e077489). Reported-by: Shijoe George <spanjikk@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-25bpf, events: fix offset in skb copy handlerDaniel Borkmann
This patch fixes the __output_custom() routine we currently use with bpf_skb_copy(). I missed that when len is larger than the size of the current handle, we can issue multiple invocations of copy_func, and __output_custom() advances destination but also source buffer by the written amount of bytes. When we have __output_custom(), this is actually wrong since in that case the source buffer points to a non-linear object, in our case an skb, which the copy_func helper is supposed to walk. Therefore, since this is non-linear we thus need to pass the offset into the helper, so that copy_func can use it for extracting the data from the source object. Therefore, adjust the callback signatures properly and pass offset into the skb_header_pointer() invoked from bpf_skb_copy() callback. The __DEFINE_OUTPUT_COPY_BODY() is adjusted to accommodate for two things: i) to pass in whether we should advance source buffer or not; this is a compile-time constant condition, ii) to pass in the offset for __output_custom(), which we do with help of __VA_ARGS__, so everything can stay inlined as is currently. Both changes allow for adapting the __output_* fast-path helpers w/o extra overhead. Fixes: 555c8a8623a3 ("bpf: avoid stack copy and use skb ctx for event output") Fixes: 7e3f977edd0b ("perf, events: add non-linear data support for raw records") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-25net/ncsi: avoid maybe-uninitialized warningArnd Bergmann
gcc-4.9 and higher warn about the newly added NSCI code: net/ncsi/ncsi-manage.c: In function 'ncsi_process_next_channel': net/ncsi/ncsi-manage.c:1003:2: error: 'old_state' may be used uninitialized in this function [-Werror=maybe-uninitialized] The warning is a false positive and therefore harmless, but it would be good to avoid it anyway. I have determined that the barrier in the spin_unlock_irqsave() is what confuses gcc to the point that it cannot track whether the variable was unused or not. This rearranges the code in a way that makes it obvious to gcc that old_state is always initialized at the time of use, functionally this should not change anything. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-25net: bridge: br_set_ageing_time takes a clock_tVivien Didelot
Change the ageing_time type in br_set_ageing_time() from u32 to what it is expected to be, i.e. a clock_t. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-25net: bridge: fix br_stp_enable_bridge commentVivien Didelot
br_stp_enable_bridge() does take the br->lock spinlock. Fix its wrongly pasted comment and use the same as br_stp_disable_bridge(). Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-25net/sched: Add match-all classifier hw offloading.Yotam Gigi
Following the work that have been done on offloading classifiers like u32 and flower, now the match-all classifier hw offloading is possible. if the interface supports tc offloading. To control the offloading, two tc flags have been introduced: skip_sw and skip_hw. Typical usage: tc filter add dev eth25 parent ffff: \ matchall skip_sw \ action mirred egress mirror \ dev eth27 Signed-off-by: Yotam Gigi <yotamg@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-25net/sched: introduce Match-all classifierJiri Pirko
The matchall classifier matches every packet and allows the user to apply actions on it. This filter is very useful in usecases where every packet should be matched, for example, packet mirroring (SPAN) can be setup very easily using that filter. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Yotam Gigi <yotamg@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller
Pablo Neira Ayuso says: ==================== Netfilter/IPVS updates for net-next The following patchset contains Netfilter/IPVS updates for net-next, they are: 1) Count pre-established connections as active in "least connection" schedulers such that pre-established connections to avoid overloading backend servers on peak demands, from Michal Kubecek via Simon Horman. 2) Address a race condition when resizing the conntrack table by caching the bucket size when fulling iterating over the hashtable in these three possible scenarios: 1) dump via /proc/net/nf_conntrack, 2) unlinking userspace helper and 3) unlinking custom conntrack timeout. From Liping Zhang. 3) Revisit early_drop() path to perform lockless traversal on conntrack eviction under stress, use del_timer() as synchronization point to avoid two CPUs evicting the same entry, from Florian Westphal. 4) Move NAT hlist_head to nf_conn object, this simplifies the existing NAT extension and it doesn't increase size since recent patches to align nf_conn, from Florian. 5) Use rhashtable for the by-source NAT hashtable, also from Florian. 6) Don't allow --physdev-is-out from OUTPUT chain, just like --physdev-out is not either, from Hangbin Liu. 7) Automagically set on nf_conntrack counters if the user tries to match ct bytes/packets from nftables, from Liping Zhang. 8) Remove possible_net_t fields in nf_tables set objects since we just simply pass the net pointer to the backend set type implementations. 9) Fix possible off-by-one in h323, from Toby DiPasquale. 10) early_drop() may be called from ctnetlink patch, so we must hold rcu read size lock from them too, this amends Florian's patch #3 coming in this batch, from Liping Zhang. 11) Use binary search to validate jump offset in x_tables, this addresses the O(n!) validation that was introduced recently resolve security issues with unpriviledge namespaces, from Florian. 12) Fix reference leak to connlabel in error path of nft_ct, from Zhang. 13) Three updates for nft_log: Fix log prefix leak in error path. Bail out on loglevel larger than debug in nft_log and set on the new NF_LOG_F_COPY_LEN flag when snaplen is specified. Again from Zhang. 14) Allow to filter rule dumps in nf_tables based on table and chain names. 15) Simplify connlabel to always use 128 bits to store labels and get rid of unused function in xt_connlabel, from Florian. 16) Replace set_expect_timeout() by mod_timer() from the h323 conntrack helper, by Gao Feng. 17) Put back x_tables module reference in nft_compat on error, from Liping Zhang. 18) Add a reference count to the x_tables extensions cache in nft_compat, so we can remove them when unused and avoid a crash if the extensions are rmmod, again from Zhang. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-25Merge tag 'tty-4.8-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver updates from Greg KH: "Here is the big tty and serial driver update for 4.8-rc1. Lots of good cleanups from Jiri on a number of vt and other tty related things, and the normal driver updates. Full details are in the shortlog. All of these have been in linux-next for a while with no reported issues" * tag 'tty-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (90 commits) tty/serial: atmel: enforce tasklet init and termination sequences serial: sh-sci: Stop transfers in sci_shutdown() serial: 8250_ingenic: drop #if conditional surrounding earlycon code serial: 8250_mtk: drop !defined(MODULE) conditional serial: 8250_uniphier: drop !defined(MODULE) conditional earlycon: mark earlycon code as __used iif the caller is built-in tty/serial/8250: use mctrl_gpio helpers serial: mctrl_gpio: enable API usage only for initialized mctrl_gpios struct serial: mctrl_gpio: add modem control read routine tty/serial/8250: make UART_MCR register access consistent serial: 8250_mid: Read RX buffer on RX DMA timeout for DNV serial: 8250_dma: Export serial8250_rx_dma_flush() dmaengine: hsu: Export hsu_dma_get_status() tty: serial: 8250: add CON_CONSDEV to flags tty: serial: samsung: add byte-order aware bit functions tty: serial: samsung: fixup accessors for endian serial: sirf: make fifo functions static serial: mps2-uart: make driver explicitly non-modular serial: mvebu-uart: free the IRQ in ->shutdown() serial/bcm63xx_uart: use correct alias naming ...
2016-07-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Just several instances of overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-24Merge tag 'ceph-for-4.7-rc8' of git://github.com/ceph/ceph-clientLinus Torvalds
Pull ceph fix from Ilya Dryomov: "A fix for a long-standing bug in the incremental osdmap handling code that caused misdirected requests, tagged for stable" The tag is signed with a brand new key - Sage is on vacation and I didn't anticipate this" * tag 'ceph-for-4.7-rc8' of git://github.com/ceph/ceph-client: libceph: apply new_state before new_up_client on incrementals
2016-07-23netfilter: nft_compat: fix crash when related match/target module is removedLiping Zhang
We "cache" the loaded match/target modules and reuse them, but when the modules are removed, we still point to them. Then we may end up with invalid memory references when using iptables-compat to add rules later. Input the following commands will reproduce the kernel crash: # iptables-compat -A INPUT -j LOG # iptables-compat -D INPUT -j LOG # rmmod xt_LOG # iptables-compat -A INPUT -j LOG BUG: unable to handle kernel paging request at ffffffffa05a9010 IP: [<ffffffff813f783e>] strcmp+0xe/0x30 Call Trace: [<ffffffffa05acc43>] nft_target_select_ops+0x83/0x1f0 [nft_compat] [<ffffffffa058a177>] nf_tables_expr_parse+0x147/0x1f0 [nf_tables] [<ffffffffa058e541>] nf_tables_newrule+0x301/0x810 [nf_tables] [<ffffffff8141ca00>] ? nla_parse+0x20/0x100 [<ffffffffa057fa8f>] nfnetlink_rcv+0x33f/0x53d [nfnetlink] [<ffffffffa057f94b>] ? nfnetlink_rcv+0x1fb/0x53d [nfnetlink] [<ffffffff817116b8>] netlink_unicast+0x178/0x220 [<ffffffff81711a5b>] netlink_sendmsg+0x2fb/0x3a0 [<ffffffff816b7fc8>] sock_sendmsg+0x38/0x50 [<ffffffff816b8a7e>] ___sys_sendmsg+0x28e/0x2a0 [<ffffffff816bcb7e>] ? release_sock+0x1e/0xb0 [<ffffffff81804ac5>] ? _raw_spin_unlock_bh+0x35/0x40 [<ffffffff816bcbe2>] ? release_sock+0x82/0xb0 [<ffffffff816b93d4>] __sys_sendmsg+0x54/0x90 [<ffffffff816b9422>] SyS_sendmsg+0x12/0x20 [<ffffffff81805172>] entry_SYSCALL_64_fastpath+0x1a/0xa9 So when nobody use the related match/target module, there's no need to "cache" it. And nft_[match|target]_release are useless anymore, remove them. Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-07-23netfilter: nft_compat: put back match/target module if init failLiping Zhang
If the user specify the invalid NFTA_MATCH_INFO/NFTA_TARGET_INFO attr or memory alloc fail, we should call module_put to the related match or target. Otherwise, we cannot remove the module even nobody use it. Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-07-23netfilter: h323: Use mod_timer instead of set_expect_timeoutGao Feng
Simplify the code without any side effect. The set_expect_timeout is used to modify the timer expired time. It tries to delete timer, and add it again. So we could use mod_timer directly. Signed-off-by: Gao Feng <fgao@ikuai8.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-07-22netfilter: connlabels: move set helper to xt_connlabelFlorian Westphal
xt_connlabel is the only user so move it. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-07-22netfilter: conntrack: support a fixed size of 128 distinct labelsFlorian Westphal
The conntrack label extension is currently variable-sized, e.g. if only 2 labels are used by iptables rules then the labels->bits[] array will only contain one element. We track size of each label storage area in the 'words' member. But in nftables and openvswitch we always have to ask for worst-case since we don't know what bit will be used at configuration time. As most arches are 64bit we need to allocate 24 bytes in this case: struct nf_conn_labels { u8 words; /* 0 1 */ /* XXX 7 bytes hole, try to pack */ long unsigned bits[2]; /* 8 24 */ Make bits a fixed size and drop the words member, it simplifies the code and only increases memory requirements on x86 when less than 64bit labels are required. We still only allocate the extension if its needed. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-07-22libceph: apply new_state before new_up_client on incrementalsIlya Dryomov
Currently, osd_weight and osd_state fields are updated in the encoding order. This is wrong, because an incremental map may look like e.g. new_up_client: { osd=6, addr=... } # set osd_state and addr new_state: { osd=6, xorstate=EXISTS } # clear osd_state Suppose osd6's current osd_state is EXISTS (i.e. osd6 is down). After applying new_up_client, osd_state is changed to EXISTS | UP. Carrying on with the new_state update, we flip EXISTS and leave osd6 in a weird "!EXISTS but UP" state. A non-existent OSD is considered down by the mapping code 2087 for (i = 0; i < pg->pg_temp.len; i++) { 2088 if (ceph_osd_is_down(osdmap, pg->pg_temp.osds[i])) { 2089 if (ceph_can_shift_osds(pi)) 2090 continue; 2091 2092 temp->osds[temp->size++] = CRUSH_ITEM_NONE; and so requests get directed to the second OSD in the set instead of the first, resulting in OSD-side errors like: [WRN] : client.4239 192.168.122.21:0/2444980242 misdirected client.4239.1:2827 pg 2.5df899f2 to osd.4 not [1,4,6] in e680/680 and hung rbds on the client: [ 493.566367] rbd: rbd0: write 400000 at 11cc00000 (0) [ 493.566805] rbd: rbd0: result -6 xferred 400000 [ 493.567011] blk_update_request: I/O error, dev rbd0, sector 9330688 The fix is to decouple application from the decoding and: - apply new_weight first - apply new_state before new_up_client - twiddle osd_state flags if marking in - clear out some of the state if osd is destroyed Fixes: http://tracker.ceph.com/issues/14901 Cc: stable@vger.kernel.org # 3.15+: 6dd74e44dc1d: libceph: set 'exists' flag for newly up osd Cc: stable@vger.kernel.org # 3.15+ Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Josh Durgin <jdurgin@redhat.com>
2016-07-22packet: propagate sock_cmsg_send() errorSoheil Hassas Yeganeh
sock_cmsg_send() can return different error codes and not only -EINVAL, and we should properly propagate them. Fixes: c14ac9451c34 ("sock: enable timestamping using control messages") Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com> Cc: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-21Merge tag 'nfc-next-4.8-1' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/nfc-next Samuel Ortiz says: ==================== NFC 4.8 pull request This is the first NFC pull request for 4.8. We have: - A fairly large NFC digital stack patchset: * RTOX fixes. * Proper DEP RWT support. * ACK and NACK PDUs handling fixes, in both initiator and target modes. * A few memory leak fixes. - A conversion of the nfcsim driver to use the digital stack. The driver supports the DEP protocol in both NFC-A and NFC-F. - Error injection through debugfs for the nfcsim driver. - Improvements to the port100 driver for the Sony USB chipset, in particular to the command abort and cancellation code paths. - A few minor fixes for the pn533, trf7970a and fdp drivers. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-21rtnl: protect do_setlink from IFLA_XDP_ATTACHEDBrenden Blanco
The IFLA_XDP_ATTACHED nested attribute is meant for read-only, and while do_setlink properly ignores it, it should be more paranoid and reject commands that try to set it. Signed-off-by: Brenden Blanco <bblanco@plumgrid.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-21netfilter: nf_tables: allow to filter out rules by table and chainPablo Neira Ayuso
If the table and/or chain attributes are set in a rule dump request, we filter out the rules based on this selection. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-07-21netfilter: nft_log: fix snaplen does not truncate packetsLiping Zhang
There's a similar problem in xt_NFLOG, and was fixed by commit 7643507fe8b5 ("netfilter: xt_NFLOG: nflog-range does not truncate packets"). Only set copy_len here does not work, so we should enable NF_LOG_F_COPY_LEN also. Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-07-21netfilter: nft_log: check the validity of log levelLiping Zhang
User can specify the log level larger than 7(debug level) via nfnetlink, this is invalid. So in this case, we should report EINVAL to the userspace. Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>