summaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)Author
2006-06-20[ATM]: fix broken uses of NIPQUAD in net/atmAl Viro
NIPQUAD expects an l-value of type __be32, _NOT_ a pointer to __be32. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-20[SCTP]: sctp_unpack_cookie() fixAl Viro
sizeof(pointer) != sizeof(array)... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-20[NET]: Prevent multiple qdisc runsHerbert Xu
Having two or more qdisc_run's contend against each other is bad because it can induce packet reordering if the packets have to be requeued. It appears that this is an unintended consequence of relinquinshing the queue lock while transmitting. That in turn is needed for devices that spend a lot of time in their transmit routine. There are no advantages to be had as devices with queues are inherently single-threaded (the loopback device is not but then it doesn't have a queue). Even if you were to add a queue to a parallel virtual device (e.g., bolt a tbf filter in front of an ipip tunnel device), you would still want to process the queue in sequence to ensure that the packets are ordered correctly. The solution here is to steal a bit from net_device to prevent this. BTW, as qdisc_restart is no longer used by anyone as a module inside the kernel (IIRC it used to with netif_wake_queue), I have not exported the new __qdisc_run function. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-20[NETFILTER]: xt_sctp: fix endless loop caused by 0 chunk lengthPatrick McHardy
Fix endless loop in the SCTP match similar to those already fixed in the SCTP conntrack helper (was CVE-2006-1527). Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-20Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (46 commits) IB/uverbs: Don't serialize with ib_uverbs_idr_mutex IB/mthca: Make all device methods truly reentrant IB/mthca: Fix memory leak on modify_qp error paths IB/uverbs: Factor out common idr code IB/uverbs: Don't decrement usecnt on error paths IB/uverbs: Release lock on error path IB/cm: Use address handle helpers IB/sa: Add ib_init_ah_from_path() IB: Add ib_init_ah_from_wc() IB/ucm: Get rid of duplicate P_Key parameter IB/srp: Factor out common request reset code IB/srp: Support SRP rev. 10 targets [SCSI] srp.h: Add I/O Class values IB/fmr: Use device's max_map_map_per_fmr attribute in FMR pool. IB/mthca: Fill in max_map_per_fmr device attribute IB/ipath: Add client reregister event generation IB/mthca: Add client reregister event generation IB: Move struct port_info from ipath to <rdma/ib_smi.h> IPoIB: Handle client reregister events IB: Add client reregister event type ...
2006-06-20Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (109 commits) [ETHTOOL]: Fix UFO typo [SCTP]: Fix persistent slowdown in sctp when a gap ack consumes rx buffer. [SCTP]: Send only 1 window update SACK per message. [SCTP]: Don't do CRC32C checksum over loopback. [SCTP] Reset rtt_in_progress for the chunk when processing its sack. [SCTP]: Reject sctp packets with broadcast addresses. [SCTP]: Limit association max_retrans setting in setsockopt. [PFKEYV2]: Fix inconsistent typing in struct sadb_x_kmprivate. [IPV6]: Sum real space for RTAs. [IRDA]: Use put_unaligned() in irlmp_do_discovery(). [BRIDGE]: Add support for NETIF_F_HW_CSUM devices [NET]: Add NETIF_F_GEN_CSUM and NETIF_F_ALL_CSUM [TG3]: Convert to non-LLTX [TG3]: Remove unnecessary tx_lock [TCP]: Add tcp_slow_start_after_idle sysctl. [BNX2]: Update version and reldate [BNX2]: Use CPU native page size [BNX2]: Use compressed firmware [BNX2]: Add firmware decompression [BNX2]: Allow WoL settings on new 5708 chips ... Manual fixup for conflict in drivers/net/tulip/winbond-840.c
2006-06-18[ETHTOOL]: Fix UFO typoHerbert Xu
The function ethtool_get_ufo was referring to ETHTOOL_GTSO instead of ETHTOOL_GUFO. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-18[SCTP]: Fix persistent slowdown in sctp when a gap ack consumes rx buffer.Neil Horman
In the event that our entire receive buffer is full with a series of chunks that represent a single gap-ack, and then we accept a chunk (or chunks) that fill in the gap between the ctsn and the first gap, we renege chunks from the end of the buffer, which effectively does nothing but move our gap to the end of our received tsn stream. This does little but move our missing tsns down stream a little, and, if the sender is sending sufficiently large retransmit frames, the result is a perpetual slowdown which can never be recovered from, since the only chunk that can be accepted to allow progress in the tsn stream necessitates that a new gap be created to make room for it. This leads to a constant need for retransmits, and subsequent receiver stalls. The fix I've come up with is to deliver the frame without reneging if we have a full receive buffer and the receiving sockets sk_receive_queue is empty(indicating that the receive buffer is being blocked by a missing tsn). Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Sridhar Samudrala <sri@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-18[SCTP]: Send only 1 window update SACK per message.Tsutomu Fujii
Right now, every time we increase our rwnd by more then MTU bytes, we trigger a SACK. When processing large messages, this will generate a SACK for almost every other SCTP fragment. However since we are freeing the entire message at the same time, we might as well collapse the SACK generation to 1. Signed-off-by: Tsutomu Fujii <t-fujii@nb.jp.nec.com> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: Sridhar Samudrala <sri@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-18[SCTP]: Don't do CRC32C checksum over loopback.Sridhar Samudrala
Signed-off-by: Sridhar Samudrala <sri@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-18[SCTP] Reset rtt_in_progress for the chunk when processing its sack.Vlad Yasevich
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: Sridhar Samudrala <sri@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-18[SCTP]: Reject sctp packets with broadcast addresses.Vlad Yasevich
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: Sridhar Samudrala <sri@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-18[SCTP]: Limit association max_retrans setting in setsockopt.Vlad Yasevich
When using ASSOCINFO socket option, we need to limit the number of maximum association retransmissions to be no greater than the sum of all the path retransmissions. This is specified in Section 7.1.2 of the SCTP socket API draft. However, we only do this if the association has multiple paths. If there is only one path, the protocol stack will use the assoc_max_retrans setting when trying to retransmit packets. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: Sridhar Samudrala <sri@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-18[IPV6]: Sum real space for RTAs.YOSHIFUJI Hideaki
This patch fixes RTNLGRP_IPV6_IFINFO netlink notifications. Issue pointed out by Patrick McHardy <kaber@trash.net>. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Acked-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-18[IRDA]: Use put_unaligned() in irlmp_do_discovery().David S. Miller
irda_device_info->hints[] is byte aligned but is being accessed as a u16 Based upon a patch by Luke Yang <luke.adi@gmail.com>. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-18[BRIDGE]: Add support for NETIF_F_HW_CSUM devicesHerbert Xu
As it is the bridge will only ever declare NETIF_F_IP_CSUM even if all its constituent devices support NETIF_F_HW_CSUM. This patch fixes this by supporting the first one out of NETIF_F_NO_CSUM, NETIF_F_HW_CSUM, and NETIF_F_IP_CSUM that is supported by all constituent devices. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-18[NET]: Add NETIF_F_GEN_CSUM and NETIF_F_ALL_CSUMHerbert Xu
The current stack treats NETIF_F_HW_CSUM and NETIF_F_NO_CSUM identically so we test for them in quite a few places. For the sake of brevity, I'm adding the macro NETIF_F_GEN_CSUM for these two. We also test the disjunct of NETIF_F_IP_CSUM and the other two in various places, for that purpose I've added NETIF_F_ALL_CSUM. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-18[TCP]: Add tcp_slow_start_after_idle sysctl.David S. Miller
A lot of people have asked for a way to disable tcp_cwnd_restart(), and it seems reasonable to add a sysctl to do that. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-18[TCP] Westwood: reset RTT min after FRTOLuca De Cicco
RTT_min is updated each time a timeout event occurs in order to cope with hard handovers in wireless scenarios such as UMTS. Signed-off-by: Luca De Cicco <ldecicco@gmail.com> Signed-off-by: Stephen Hemminger <shemminger@dxpl.pdx.osdl.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-18[TCP] Westwood: bandwidth filter startupLuca De Cicco
The bandwidth estimate filter is now initialized with the first sample in order to have better performances in the case of small file transfers. Signed-off-by: Luca De Cicco <ldecicco@gmail.com> Signed-off-by: Stephen Hemminger <shemminger@dxpl.pdx.osdl.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-18[TCP] Westwood: comment fixesLuca De Cicco
Cleanup some comments and add more references Signed-off-by: Luca De Cicco <ldecicco@gmail.com> Signed-off-by: Stephen Hemminger <shemminger@dxpl.pdx.osdl.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-18[TCP] Westwood: fix first sampleStephen Hemminger
Need to update send sequence number tracking after first ack. Rework of patch from Luca De Cicco. Signed-off-by: Stephen Hemminger <shemminger@dxpl.pdx.osdl.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-18[NET]: net.ipv4.ip_autoconfig sysctl removalStephen Hemminger
The sysctl net.ipv4.ip_autoconfig is a legacy value that is not used. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-18[IPX]: Endian bug in ipxrtr_route_packet()Alexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-18[NET]: Warn in __skb_trim if skb is pagedHerbert Xu
It's better to warn and fail rather than rarely triggering BUG on paths that incorrectly call skb_trim/__skb_trim on a non-linear skb. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-18[NET]: skb_trim auditHerbert Xu
I found a few more spots where pskb_trim_rcsum could be used but were not. This patch changes them to use it. Also, sk_filter can get paged skb data. Therefore we must use pskb_trim instead of skb_trim. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-18[NET]: Clean up skb_linearizeHerbert Xu
The linearisation operation doesn't need to be super-optimised. So we can replace __skb_linearize with __pskb_pull_tail which does the same thing but is more general. Also, most users of skb_linearize end up testing whether the skb is linear or not so it helps to make skb_linearize do just that. Some callers of skb_linearize also use it to copy cloned data, so it's useful to have a new function skb_linearize_cow to copy the data if it's either non-linear or cloned. Last but not least, I've removed the gfp argument since nobody uses it anymore. If it's ever needed we can easily add it back. Misc bugs fixed by this patch: * via-velocity error handling (also, no SG => no frags) Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-18[NET]: Add netif_tx_lockHerbert Xu
Various drivers use xmit_lock internally to synchronise with their transmission routines. They do so without setting xmit_lock_owner. This is fine as long as netpoll is not in use. With netpoll it is possible for deadlocks to occur if xmit_lock_owner isn't set. This is because if a printk occurs while xmit_lock is held and xmit_lock_owner is not set can cause netpoll to attempt to take xmit_lock recursively. While it is possible to resolve this by getting netpoll to use trylock, it is suboptimal because netpoll's sole objective is to maximise the chance of getting the printk out on the wire. So delaying or dropping the message is to be avoided as much as possible. So the only alternative is to always set xmit_lock_owner. The following patch does this by introducing the netif_tx_lock family of functions that take care of setting/unsetting xmit_lock_owner. I renamed xmit_lock to _xmit_lock to indicate that it should not be used directly. I didn't provide irq versions of the netif_tx_lock functions since xmit_lock is meant to be a BH-disabling lock. This is pretty much a straight text substitution except for a small bug fix in winbond. It currently uses netif_stop_queue/spin_unlock_wait to stop transmission. This is unsafe as an IRQ can potentially wake up the queue. So it is safer to use netif_tx_disable. The hamradio bits used spin_lock_irq but it is unnecessary as xmit_lock must never be taken in an IRQ handler. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-18[NETFILTER]: hashlimit match: fix random initializationPatrick McHardy
hashlimit does: if (!ht->rnd) get_random_bytes(&ht->rnd, 4); ignoring that 0 is also a valid random number. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-18[NETFILTER]: recent match: missing refcnt initializationPatrick McHardy
Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-18[NETFILTER]: recent match: fix "sleeping function called from invalid context"Patrick McHardy
create_proc_entry must not be called with locks held. Use a mutex instead to protect data only changed in user context. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-18[SECMARK]: Add CONNSECMARK xtables targetJames Morris
Add a new xtables target, CONNSECMARK, which is used to specify rules for copying security marks from packets to connections, and for copyying security marks back from connections to packets. This is similar to the CONNMARK target, but is more limited in scope in that it only allows copying of security marks to and from packets, as this is all it needs to do. A typical scenario would be to apply a security mark to a 'new' packet with SECMARK, then copy that to its conntrack via CONNMARK, and then restore the security mark from the connection to established and related packets on that connection. Signed-off-by: James Morris <jmorris@namei.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-18[SECMARK]: Add secmark support to conntrackJames Morris
Add a secmark field to IP and NF conntracks, so that security markings on packets can be copied to their associated connections, and also copied back to packets as required. This is similar to the network mark field currently used with conntrack, although it is intended for enforcement of security policy rather than network policy. Signed-off-by: James Morris <jmorris@namei.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-18[SECMARK]: Add xtables SECMARK targetJames Morris
Add a SECMARK target to xtables, allowing the admin to apply security marks to packets via both iptables and ip6tables. The target currently handles SELinux security marking, but can be extended for other purposes as needed. Signed-off-by: James Morris <jmorris@namei.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-18[SECMARK]: Add secmark support to core networking.James Morris
Add a secmark field to the skbuff structure, to allow security subsystems to place security markings on network packets. This is similar to the nfmark field, except is intended for implementing security policy, rather than than networking policy. This patch was already acked in principle by Dave Miller. Signed-off-by: James Morris <jmorris@namei.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-18[NET]: Fix warnings after LSM-IPSEC changes.David S. Miller
Assignment used as truth value in xfrm_del_sa() and xfrm_get_policy(). Wrong argument type declared for security_xfrm_state_delete() when SELINUX is disabled. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-18[NET]: NET_TCPPROBE Kconfig fixDave Jones
Just spotted this typo in a new option. Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-18[LSM-IPsec]: SELinux AuthorizeCatherine Zhang
This patch contains a fix for the previous patch that adds security contexts to IPsec policies and security associations. In the previous patch, no authorization (besides the check for write permissions to SAD and SPD) is required to delete IPsec policies and security assocations with security contexts. Thus a user authorized to change SAD and SPD can bypass the IPsec policy authorization by simply deleteing policies with security contexts. To fix this security hole, an additional authorization check is added for removing security policies and security associations with security contexts. Note that if no security context is supplied on add or present on policy to be deleted, the SELinux module allows the change unconditionally. The hook is called on deletion when no context is present, which we may want to change. At present, I left it up to the module. LSM changes: The patch adds two new LSM hooks: xfrm_policy_delete and xfrm_state_delete. The new hooks are necessary to authorize deletion of IPsec policies that have security contexts. The existing hooks xfrm_policy_free and xfrm_state_free lack the context to do the authorization, so I decided to split authorization of deletion and memory management of security data, as is typical in the LSM interface. Use: The new delete hooks are checked when xfrm_policy or xfrm_state are deleted by either the xfrm_user interface (xfrm_get_policy, xfrm_del_sa) or the pfkey interface (pfkey_spddelete, pfkey_delete). SELinux changes: The new policy_delete and state_delete functions are added. Signed-off-by: Catherine Zhang <cxzhang@watson.ibm.com> Signed-off-by: Trent Jaeger <tjaeger@cse.psu.edu> Acked-by: James Morris <jmorris@namei.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-18[IPV4] icmp: Kill local 'ip' arg in icmp_redirect().David S. Miller
It is typed wrong, and it's only assigned and used once. So just pass in iph->daddr directly which fixes both problems. Based upon a patch by Alexey Dobriyan. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-18[IPV4]: Right prototype of __raw_v4_lookup()Alexey Dobriyan
All users pass 32-bit values as addresses and internally they're compared with 32-bit entities. So, change "laddr" and "raddr" types to __be32. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-18[IPV4] igmp: Fixup struct ip_mc_list::multiaddr typeAlexey Dobriyan
All users except two expect 32-bit big-endian value. One is of ->multiaddr = ->multiaddr variety. And last one is "%08lX". Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-18[TCP]: Fix compile warning in tcp_probe.cDavid S. Miller
The suseconds_t et al. are not necessarily any particular type on every platform, so cast to unsigned long so that we can use one printf format string and avoid warnings across the board Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-18[TCP]: Limited slow start for Highspeed TCPStephen Hemminger
Implementation of RFC3742 limited slow start. Added as part of the TCP highspeed congestion control module. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-18[TCP]: TCP Probe congestion window tracingStephen Hemminger
This adds a new module for tracking TCP state variables non-intrusively using kprobes. It has a simple /proc interface that outputs one line for each packet received. A sample usage is to collect congestion window and ssthresh over time graphs. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-18[TCP]: Minimum congestion window consolidation.Stephen Hemminger
Many of the TCP congestion methods all just use ssthresh as the minimum congestion window on decrease. Rather than duplicating the code, just have that be the default if that handle in the ops structure is not set. Minor behaviour change to TCP compound. It probably wants to use this (ssthresh) as lower bound, rather than ssthresh/2 because the latter causes undershoot on loss. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-18[TCP]: TCP Compound quad root functionStephen Hemminger
The original code did a 64 bit divide directly, which won't work on 32 bit platforms. Rather than doing a 64 bit square root twice, just implement a 4th root function in one pass using Newton's method. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-18[TCP]: TCP Compound congestion controlAngelo P. Castellani
TCP Compound is a sender-side only change to TCP that uses a mixed Reno/Vegas approach to calculate the cwnd. For further details look here: ftp://ftp.research.microsoft.com/pub/tr/TR-2005-86.pdf Signed-off-by: Angelo P. Castellani <angelo.castellani@gmail.com> Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-18[TCP]: TCP Veno congestion controlBin Zhou
TCP Veno module is a new congestion control module to improve TCP performance over wireless networks. The key innovation in TCP Veno is the enhancement of TCP Reno/Sack congestion control algorithm by using the estimated state of a connection based on TCP Vegas. This scheme significantly reduces "blind" reduction of TCP window regardless of the cause of packet loss. This work is based on the research paper "TCP Veno: TCP Enhancement for Transmission over Wireless Access Networks." C. P. Fu, S. C. Liew, IEEE Journal on Selected Areas in Communication, Feb. 2003. Original paper and many latest research works on veno: http://www.ntu.edu.sg/home/ascpfu/veno/veno.html Signed-off-by: Bin Zhou <zhou0022@ntu.edu.sg> Cheng Peng Fu <ascpfu@ntu.edu.sg> Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-18[TCP]: TCP Low Priority congestion controlWong Hoi Sing Edison
TCP Low Priority is a distributed algorithm whose goal is to utilize only the excess network bandwidth as compared to the ``fair share`` of bandwidth as targeted by TCP. Available from: http://www.ece.rice.edu/~akuzma/Doc/akuzma/TCP-LP.pdf Original Author: Aleksandar Kuzmanovic <akuzma@northwestern.edu> See http://www-ece.rice.edu/networks/TCP-LP/ for their implementation. As of 2.6.13, Linux supports pluggable congestion control algorithms. Due to the limitation of the API, we take the following changes from the original TCP-LP implementation: o We use newReno in most core CA handling. Only add some checking within cong_avoid. o Error correcting in remote HZ, therefore remote HZ will be keeped on checking and updating. o Handling calculation of One-Way-Delay (OWD) within rtt_sample, sicne OWD have a similar meaning as RTT. Also correct the buggy formular. o Handle reaction for Early Congestion Indication (ECI) within pkts_acked, as mentioned within pseudo code. o OWD is handled in relative format, where local time stamp will in tcp_time_stamp format. Port from 2.4.19 to 2.6.16 as module by: Wong Hoi Sing Edison <hswong3i@gmail.com> Hung Hing Lun <hlhung3i@gmail.com> Signed-off-by: Wong Hoi Sing Edison <hswong3i@gmail.com> Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-18[LLC]: Fix double receive of SKB.Andrew Morton
Oops fix from Stephen: remove duplicate rcv() calls. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>