summaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)Author
2014-11-20Merge tag 'mac80211-next-for-john-2014-11-20' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg <johannes@sipsolutions.net> says: "It has been a while since my last pull request, so we accumulated another relatively large set of changes: * TDLS off-channel support set from Arik/Liad, with some support patches I did * custom regulatory fixes from Arik * minstrel VHT fix (and a small optimisation) from Felix * add back radiotap vendor namespace support (myself) * random MAC address scanning for cfg80211/mac80211/hwsim (myself) * CSA improvements (Luca) * WoWLAN Net Detect (wake on network found) support (Luca) * and lots of other smaller changes from many people" Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-19Merge commit '4e6ce4dc7ce71d0886908d55129d5d6482a27ff9' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
2014-11-19mac80211: minstrel_ht: add a small optimization to minstrel_aggr_checkFelix Fietkau
Check the queue mapping earlier, skb->queue_mapping is more likely than skb->data to still be in d-cache. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-19mac80211: notify drivers on sta rate table changesJohannes Berg
This allows drivers with a firmware or chip-based rate lookup table to use the most recent default rate selection without having to get it from per-packet data or explicit ieee80211_get_tx_rate calls Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-19nl80211: Broadcast CMD_NEW_INTERFACE and CMD_DEL_INTERFACETomasz Bursztyka
Let the other listeners being notified when a new or del interface command has been issued, thus reducing later necessary request to be in sync with current context. Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-19nl80211: Replace interface socket owner attribute with more generic oneJukka Rissanen
Replace NL80211_ATTR_IFACE_SOCKET_OWNER attribute with more generic NL80211_ATTR_SOCKET_OWNER that can be used with other commands that interface creation. Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-19cfg80211: protect fools returning NULL in add_virtual_intfRafał Miłecki
Callback add_virtual_intf is supposed to return ERR_PTR and trying to return NULL results in some "Unable to handle kernel paging request", etc. As it may be complicated to debug & trace, let's catch it (WARN). Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-19cfg80211: explicitly initialize some fields in custom reg pathArik Nemtsov
Explicitly initialize the DFS state and beacon found state when handling channels in the custom regulatory path. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Acked-by: Luis R. Rodriguez <mcgrof@suse.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-19cfg80211: update missing fields in custom regulatory pathArik Nemtsov
Some channels fields were not being updated in the custom regulatory path. Update them according to the code in handle_channel(). Signed-off-by: Jonathan Doron <jonathanx.doron@intel.com> Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Acked-by: Luis R. Rodriguez <mcgrof@suse.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-19mac80211: skip legacy rate mask handling for VHT ratesFelix Fietkau
The rate mask code currently assumes that a rate is legacy if IEEE80211_TX_RC_MCS is not set. This might be the cause of bogus VHT rates being reported with minstrel_ht. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-19mac80211: don't allow 40MHz tx rates in case of 20MHz chandefEliad Peller
When 20MHz chandef is used, 40MHz rates shouldn't be used (by the rate-control algorithm), even if the sta ht capabilities indicate support for it. Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Singed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-19mac80211: allow drivers to support NL80211_SCAN_FLAG_RANDOM_ADDRJohannes Berg
Allow drivers to support NL80211_SCAN_FLAG_RANDOM_ADDR with software based scanning and generate a random MAC address for them for every scan request with the flag. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-19mac80211: rcu-ify scan and scheduled scan request pointersJohannes Berg
In order to use the scan and scheduled scan request pointers during RX to check for randomisation, make them accessible using RCU. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-19cfg80211: allow drivers to support random MAC addresses for scanJohannes Berg
Add the necessary feature flags and a scan flag to support using random MAC addresses for scan while unassociated. The configuration for this supports an arbitrary MAC address value and mask, so that any kind of configuration (e.g. fixed OUI or full 46-bit random) can be requested. Full 46-bit random is the default when no other configuration is passed. Also add a small helper function to use the addr/mask correctly. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-19mac80211: remove redundant checkEliad Peller
local->scan_req was tested in the previous line, so it can't be NULL. Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-19cfg80211: add wowlan net-detect supportLuciano Coelho
Add a new WoWLAN API to enable net-detect as a wake up trigger. Net-detect allows the device to scan in the background while the host is asleep to wake up the host system when a matching network is found. Reuse the scheduled scan attributes to specify how the scan is performed while suspended and the matches that will trigger a wake event. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-19cfg80211: refactor nl80211_start_sched_scan so it can be reusedLuciano Coelho
For net detect, we will need to reuse most of the scheduled scan parsing function, but not all, so split out the attributes parsing part out of the main start sched_scan function. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-19mac80211: synchronously reserve TID per stationLiad Kaufman
In TDLS (e.g., TDLS off-channel) there is a requirement for some drivers to supply an unused TID between the AP and the device to the FW, to allow sending PTI requests and to allow the FW to aggregate on a specific TID for better throughput. To ensure that the allocated TID is indeed unused, this patch introduces an API for blocking the driver from TXing on that TID. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-19mac80211: add specific-queue flushing supportLiad Kaufman
If the HW supports IEEE80211_HW_QUEUE_CONTROL, allow flushing only specific queues rather than all of them. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-19mac80211: add TDLS channel-switch Rx flowArik Nemtsov
When receiving a TDLS channel switch request or response, parse the frame and call a new tdls_recv_channel_switch op in the low level driver with the parsed data. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-19mac80211: introduce TDLS channel switch opsArik Nemtsov
Implement the cfg80211 TDLS channel switch ops and introduce new mac80211 ones for low-level drivers. Verify low-level driver support for the new ops when using the relevant wiphy feature bit. Also verify the peer supports channel switching before passing the command down. Add a new STA flag to track the off-channel state with the TDLS peer and make sure to cancel the channel-switch if the peer STA is unexpectedly removed. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-19mac80211: add parsing of TDLS specific IEsArik Nemtsov
These are used in TDLS channel switching code. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-19cfg80211: introduce TDLS channel switch commandsArik Nemtsov
Introduce commands to initiate and cancel TDLS channel-switching. Once TDLS channel-switching is started, the lower level driver is responsible for continually initiating channel-switch operations and returning to the base (AP) channel to listen for beacons from time to time. Upon cancellation of the channel-switch all communication between the relevant TDLS peers will continue on the base channel. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-19mac80211: prepare TDLS mgmt code for channel-switch templatesArik Nemtsov
Split the data-generating from the Tx-sending functionality, as we do not want to send templates to the lower driver. Also add an optional chandef argument to the data-generating portion. It will be used for channel-switch templates. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-19mac80211: track AP and peer STA TDLS chan-switch supportArik Nemtsov
The AP or peer can prohibit TDLS channel switch via a bit in the extended capabilities IE. Parse the IE and track this bit. Set an appropriate STA flag if both the AP and peer STA support TDLS channel-switching. Add the new STA flag and the missing TDLS_INITIATOR to debugfs. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-19cfg/mac80211: define TDLS channel switch feature bitArik Nemtsov
Define some related TDLS protocol constants and advertise channel switch support in the extended-capabilities IE when the feature bit is defined. Actually supporting TDLS channel-switching also requires support for some new nl80211 commands, to be introduced by future patches. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-19mac80211: add BSS coex IE to TDLS setup framesArik Nemtsov
Add the BSS coex IE in case we support HT40 channels, as mandated by section 8.5.13 in IEEE802.11 2012. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-19mac80211: add supported channels IE during TDLS setupArik Nemtsov
This information element is mandatory in case TDLS channel-switching is to be supported. The channels given are ones supported and allowed to be active in the current regulatory setting. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-19mac80211: add function to create data frame template including keyJohannes Berg
For some TDLS channel switch implementations data frames need to be sent by the firmware based on a template. This template should be created by mac80211, and thus needs to properly be built from an 802.3 frame into an 802.11 frame. In addition, the device will need the key information so the select_key handler needs to be run. However, the driver/device will be responsible for all of the crypto encapsulation, as the sequence numbers etc. cannot be built by the host anyway in this case since it's a template to be used multiple times. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-19mac80211: factor out 802.11 header building codeJohannes Berg
Factor out the 802.11 header building code from the xmit function to be able to use it separately in a later commit. While at it, fix up some documentation. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-19mac80211: move skb info band assignment outJohannes Berg
Instead of passing the band as a parameter to ieee80211_xmit() and ieee80211_tx(), move it outside of the two functions while making sure info->band is set up before calling them. This removes the parameter and simplifies the follow commit. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-19mac80211: retransmit TDLS teardown packet through AP if not ACKedLiad Kaufman
Since the TDLS peer station might not receive the teardown packet (e.g., when in PS), this makes sure the packet is retransmitted - this time through the AP - if the TDLS peer didn't ACK the packet. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-19mac80211: add option for setting skb flags before xmitLiad Kaufman
Allows setting of an skb's flags - if needed - when calling ieee80211_subif_start_xmit(). Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-18Merge branch 'for-upstream' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg <johan.hedberg@gmail.com> says: "Here's another bluetooth-next pull request for 3.19. We've got: - Various fixes, cleanups and improvements to ieee802154/mac802154 - Support for a Broadcom BCM20702A1 variant - Lots of lockdep fixes - Fixed handling of LE CoC errors that should trigger SMP" Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-18Merge remote-tracking branch 'wireless-next/master' into mac80211-nextJohannes Berg
This brings in some mwifiex changes that further patches will need to work on top to not cause merge conflicts. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-18Bluetooth: Call drain_workqueue() before resetting stateJohan Hedberg
Doing things like hci_conn_hash_flush() while holding the hdev lock is risky since its synchronous pending work cancellation could cause the L2CAP layer to try to reacquire the hdev lock. Right now there doesn't seem to be any obvious places where this would for certain happen but it's already enough to cause lockdep to start warning against the hdev and the work struct locks being taken in the "wrong" order: [ +0.000373] mgmt-tester/1603 is trying to acquire lock: [ +0.000292] ((&conn->pending_rx_work)){+.+.+.}, at: [<c104266d>] flush_work+0x0/0x181 [ +0.000270] but task is already holding lock: [ +0.000000] (&hdev->lock){+.+.+.}, at: [<c13b9a80>] hci_dev_do_close+0x166/0x359 [ +0.000000] which lock already depends on the new lock. [ +0.000000] the existing dependency chain (in reverse order) is: [ +0.000000] -> #1 (&hdev->lock){+.+.+.}: [ +0.000000] [<c105ea8f>] lock_acquire+0xe3/0x156 [ +0.000000] [<c140c663>] mutex_lock_nested+0x54/0x375 [ +0.000000] [<c13d644b>] l2cap_recv_frame+0x293/0x1a9c [ +0.000000] [<c13d7ca4>] process_pending_rx+0x50/0x5e [ +0.000000] [<c1041a3f>] process_one_work+0x21c/0x436 [ +0.000000] [<c1041e3d>] worker_thread+0x1be/0x251 [ +0.000000] [<c1045a22>] kthread+0x94/0x99 [ +0.000000] [<c140f801>] ret_from_kernel_thread+0x21/0x30 [ +0.000000] -> #0 ((&conn->pending_rx_work)){+.+.+.}: [ +0.000000] [<c105e158>] __lock_acquire+0xa07/0xc89 [ +0.000000] [<c105ea8f>] lock_acquire+0xe3/0x156 [ +0.000000] [<c1042696>] flush_work+0x29/0x181 [ +0.000000] [<c1042864>] __cancel_work_timer+0x76/0x8f [ +0.000000] [<c104288c>] cancel_work_sync+0xf/0x11 [ +0.000000] [<c13d4c18>] l2cap_conn_del+0x72/0x183 [ +0.000000] [<c13d8953>] l2cap_disconn_cfm+0x49/0x55 [ +0.000000] [<c13be37a>] hci_conn_hash_flush+0x7a/0xc3 [ +0.000000] [<c13b9af6>] hci_dev_do_close+0x1dc/0x359 [ +0.012038] [<c13bbe38>] hci_unregister_dev+0x6e/0x1a3 [ +0.000000] [<c12d33c1>] vhci_release+0x28/0x47 [ +0.000000] [<c10dd6a9>] __fput+0xd6/0x154 [ +0.000000] [<c10dd757>] ____fput+0xd/0xf [ +0.000000] [<c1044bb2>] task_work_run+0x6b/0x8d [ +0.000000] [<c1001bd2>] do_notify_resume+0x3c/0x3f [ +0.000000] [<c140fa70>] work_notifysig+0x29/0x31 [ +0.000000] other info that might help us debug this: [ +0.000000] Possible unsafe locking scenario: [ +0.000000] CPU0 CPU1 [ +0.000000] ---- ---- [ +0.000000] lock(&hdev->lock); [ +0.000000] lock((&conn->pending_rx_work)); [ +0.000000] lock(&hdev->lock); [ +0.000000] lock((&conn->pending_rx_work)); [ +0.000000] *** DEADLOCK *** Fully fixing this would require some quite heavy refactoring to change how the hdev lock and hci_conn instances are handled together. A simpler solution for now which this patch takes is to try ensure that the hdev workqueue is empty before proceeding with the various cleanup calls, including hci_conn_hash_flush(). Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-11-18Bluetooth: Use shorter "rand" name for "randomizer"Johan Hedberg
The common short form of "randomizer" is "rand" in many places (including the Bluetooth specification). The shorter version also makes for easier to read code with less forced line breaks. This patch renames all occurences of "randomizer" to "rand" in the Bluetooth subsystem code. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-11-18Bluetooth: Fix BR/EDR-only address checks for remote OOB dataJohan Hedberg
For now the mgmt commands dealing with remote OOB data are strictly BR/EDR-only. This patch fixes missing checks for the passed address type so that any non-BR/EDR value triggers the appropriate error response. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-11-17ieee802154: fix byteorder for short address and panidAlexander Aring
This patch changes the byteorder handling for short and panid handling. We now except to get little endian in nl802154 for these attributes. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-11-17ieee802154: rename and move WPAN_NUM_ definesAlexander Aring
This patch moves the 802.15.4 constraints WPAN_NUM_ defines into "net/ieee802154.h" which should contain all necessary 802.15.4 related information. Also rename these defines to a common name which is IEEE802154_MAX_CHANNEL and IEEE802154_MAX_PAGE. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-11-17ieee802154: add del interface commandAlexander Aring
This patch adds support for deleting a wpan interface via nl802154. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-11-17ieee802154: setting extended address while iface addAlexander Aring
This patch adds support for setting an extended address while registration a new interface. If ieee802154_is_valid_extended_addr getting as parameter and invalid extended address then the perm address is fallback. This is useful to make some default handling while for example default registration of a wpan interface while phy registration. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-11-17ieee802154: add new interface commandAlexander Aring
This patch adds a new nl802154 command for adding a new interface according to a wpan phy via nl802154. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-11-17mac802154: remove wpan_dev parameter in if_addAlexander Aring
This parameter was grabbed from wireless implementation with the identically wireless dev struct. We don't need this right now and so we remove it. Maybe we will add it later again if we found any real reason to have such parameter. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-11-17mac802154: use new nl802154 iftype typesAlexander Aring
This patch replace the depracted IEEE802154_DEV to the new introduced NL802154_IFTYPE_NODE types. There is a backwards compatibility to have the identical types for both enum definitions. Also remove some inlcude issue with "linux/nl802154.h", because the export nl_policy inside this header it was always necessary to have an include of "net/rtnetlink.h" before. The reason for this is more complicated. Nevertheless we removed this now, because "linux/nl802154.h" is the depracted netlink interface. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-11-17mac802154: remove deprecated linux-zigbee infoAlexander Aring
We don't and we can't name it zigbee anymore. This patch removes deprecated information for project website. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-11-17mac802154: remove const for non pointer in rdev-opsAlexander Aring
This patches removes the const keyword in variables which are non pointers. There is no sense to declare call by value parameters as const. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Reported-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-11-17mac802154: remove const for non pointer in cfg opsAlexander Aring
This patches removes the const keyword in variables which are non pointers. There is no sense to declare call by value parameters as const. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Reported-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-11-17mac802154: remove const for non pointer in driver-opsAlexander Aring
This patches removes the const keyword in variables which are non pointers. There is no sense to declare call by value parameters as const. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Reported-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-11-17mac802154: remove unused prototypesAlexander Aring
This patch removes some prototypes which are not used anymore. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
generated by cgit v0.10.2 at 2024-11-07 17:22:26 (GMT)