summaryrefslogtreecommitdiff
path: root/samples/bpf
AgeCommit message (Collapse)Author
2016-05-06samples/bpf: add verifier testsAlexei Starovoitov
add few tests for "pointer to packet" logic of the verifier Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-06samples/bpf: add 'pointer to packet' testsAlexei Starovoitov
parse_simple.c - packet parser exapmle with single length check that filters out udp packets for port 9 parse_varlen.c - variable length parser that understand multiple vlan headers, ipip, ipip6 and ip options to filter out udp or tcp packets on port 9. The packet is parsed layer by layer with multitple length checks. parse_ldabs.c - classic style of packet parsing using LD_ABS instruction. Same functionality as parse_simple. simple = 24.1Mpps per core varlen = 22.7Mpps ldabs = 21.4Mpps Parser with LD_ABS instructions is slower than full direct access parser which does more packet accesses and checks. These examples demonstrate the choice bpf program authors can make between flexibility of the parser vs speed. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: net/ipv4/ip_gre.c Minor conflicts between tunnel bug fixes in net and ipv6 tunnel cleanups in net-next. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-29samples/bpf: like LLC also verify and allow redefining CLANG commandJesper Dangaard Brouer
Users are likely to manually compile both LLVM 'llc' and 'clang' tools. Thus, also allow redefining CLANG and verify command exist. Makefile implementation wise, the target that verify the command have been generalized. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-29samples/bpf: allow make to be run from samples/bpf/ directoryJesper Dangaard Brouer
It is not intuitive that 'make' must be run from the top level directory with argument "samples/bpf/" to compile these eBPF samples. Introduce a kbuild make file trick that allow make to be run from the "samples/bpf/" directory itself. It basically change to the top level directory and call "make samples/bpf/" with the "/" slash after the directory name. Also add a clean target that only cleans this directory, by taking advantage of the kbuild external module setting M=$PWD. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-29samples/bpf: add a README file to get users startedJesper Dangaard Brouer
Getting started with using examples in samples/bpf/ is not straightforward. There are several dependencies, and specific versions of these dependencies. Just compiling the example tool is also slightly obscure, e.g. one need to call make like: make samples/bpf/ Do notice the "/" slash after the directory name. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-29samples/bpf: Makefile verify LLVM compiler avail and bpf target is supportedJesper Dangaard Brouer
Make compiling samples/bpf more user friendly, by detecting if LLVM compiler tool 'llc' is available, and also detect if the 'bpf' target is available in this version of LLVM. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-29samples/bpf: add back functionality to redefine LLC commandJesper Dangaard Brouer
It is practical to be-able-to redefine the location of the LLVM command 'llc', because not all distros have a LLVM version with bpf target support. Thus, it is sometimes required to compile LLVM from source, and sometimes it is not desired to overwrite the distros default LLVM version. This feature was removed with 128d1514be35 ("samples/bpf: Use llc in PATH, rather than a hardcoded value"). Add this features back. Note that it is possible to redefine the LLC on the make command like: make samples/bpf/ LLC=~/git/llvm/build/bin/llc Fixes: 128d1514be35 ("samples/bpf: Use llc in PATH, rather than a hardcoded value") Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-28samples/bpf: fix trace_output exampleAlexei Starovoitov
llvm cannot always recognize memset as builtin function and optimize it away, so just delete it. It was a leftover from testing of bpf_perf_event_output() with large data structures. Fixes: 39111695b1b8 ("samples: bpf: add bpf_perf_event_output example") Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-15bpf, samples: add test cases for raw stackDaniel Borkmann
This adds test cases mostly around ARG_PTR_TO_RAW_STACK to check the verifier behaviour. [...] #84 raw_stack: no skb_load_bytes OK #85 raw_stack: skb_load_bytes, no init OK #86 raw_stack: skb_load_bytes, init OK #87 raw_stack: skb_load_bytes, spilled regs around bounds OK #88 raw_stack: skb_load_bytes, spilled regs corruption OK #89 raw_stack: skb_load_bytes, spilled regs corruption 2 OK #90 raw_stack: skb_load_bytes, spilled regs + data OK #91 raw_stack: skb_load_bytes, invalid access 1 OK #92 raw_stack: skb_load_bytes, invalid access 2 OK #93 raw_stack: skb_load_bytes, invalid access 3 OK #94 raw_stack: skb_load_bytes, invalid access 4 OK #95 raw_stack: skb_load_bytes, invalid access 5 OK #96 raw_stack: skb_load_bytes, invalid access 6 OK #97 raw_stack: skb_load_bytes, large access OK Summary: 98 PASSED, 0 FAILED Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-15bpf, samples: don't zero data when not neededDaniel Borkmann
Remove the zero initialization in the sample programs where appropriate. Note that this is an optimization which is now possible, old programs still doing the zero initialization are just fine as well. Also, make sure we don't have padding issues when we don't memset() the entire struct anymore. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2016-04-08samples/bpf: add tracepoint vs kprobe performance testsAlexei Starovoitov
the first microbenchmark does fd=open("/proc/self/comm"); for() { write(fd, "test"); } and on 4 cpus in parallel: writes per sec base (no tracepoints, no kprobes) 930k with kprobe at __set_task_comm() 420k with tracepoint at task:task_rename 730k For kprobe + full bpf program manully fetches oldcomm, newcomm via bpf_probe_read. For tracepint bpf program does nothing, since arguments are copied by tracepoint. 2nd microbenchmark does: fd=open("/dev/urandom"); for() { read(fd, buf); } and on 4 cpus in parallel: reads per sec base (no tracepoints, no kprobes) 300k with kprobe at urandom_read() 279k with tracepoint at random:urandom_read 290k bpf progs attached to kprobe and tracepoint are noop. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-08samples/bpf: tracepoint exampleAlexei Starovoitov
modify offwaketime to work with sched/sched_switch tracepoint instead of kprobe into finish_task_switch Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-08samples/bpf: add tracepoint support to bpf loaderAlexei Starovoitov
Recognize "tracepoint/" section name prefix and attach the program to that tracepoint. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-06samples/bpf: Enable powerpc supportNaveen N. Rao
Add the necessary definitions for building bpf samples on ppc. Since ppc doesn't store function return address on the stack, modify how PT_REGS_RET() and PT_REGS_FP() work. Also, introduce PT_REGS_IP() to access the instruction pointer. Cc: Alexei Starovoitov <ast@fb.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: David S. Miller <davem@davemloft.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-06samples/bpf: Use llc in PATH, rather than a hardcoded valueNaveen N. Rao
While at it, remove the generation of .s files and fix some typos in the related comment. Cc: Alexei Starovoitov <ast@fb.com> Cc: David S. Miller <davem@davemloft.net> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-06samples/bpf: Fix build breakage with map_perf_test_user.cNaveen N. Rao
Building BPF samples is failing with the below error: samples/bpf/map_perf_test_user.c: In function ‘main’: samples/bpf/map_perf_test_user.c:134:9: error: variable ‘r’ has initializer but incomplete type struct rlimit r = {RLIM_INFINITY, RLIM_INFINITY}; ^ samples/bpf/map_perf_test_user.c:134:21: error: ‘RLIM_INFINITY’ undeclared (first use in this function) struct rlimit r = {RLIM_INFINITY, RLIM_INFINITY}; ^ samples/bpf/map_perf_test_user.c:134:21: note: each undeclared identifier is reported only once for each function it appears in samples/bpf/map_perf_test_user.c:134:9: warning: excess elements in struct initializer [enabled by default] struct rlimit r = {RLIM_INFINITY, RLIM_INFINITY}; ^ samples/bpf/map_perf_test_user.c:134:9: warning: (near initialization for ‘r’) [enabled by default] samples/bpf/map_perf_test_user.c:134:9: warning: excess elements in struct initializer [enabled by default] samples/bpf/map_perf_test_user.c:134:9: warning: (near initialization for ‘r’) [enabled by default] samples/bpf/map_perf_test_user.c:134:16: error: storage size of ‘r’ isn’t known struct rlimit r = {RLIM_INFINITY, RLIM_INFINITY}; ^ samples/bpf/map_perf_test_user.c:139:2: warning: implicit declaration of function ‘setrlimit’ [-Wimplicit-function-declaration] setrlimit(RLIMIT_MEMLOCK, &r); ^ samples/bpf/map_perf_test_user.c:139:12: error: ‘RLIMIT_MEMLOCK’ undeclared (first use in this function) setrlimit(RLIMIT_MEMLOCK, &r); ^ samples/bpf/map_perf_test_user.c:134:16: warning: unused variable ‘r’ [-Wunused-variable] struct rlimit r = {RLIM_INFINITY, RLIM_INFINITY}; ^ make[2]: *** [samples/bpf/map_perf_test_user.o] Error 1 Fix this by including the necessary header file. Cc: Alexei Starovoitov <ast@fb.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: David S. Miller <davem@davemloft.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-09samples/bpf: add map performance testAlexei Starovoitov
performance tests for hash map and per-cpu hash map with and without pre-allocation Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-09samples/bpf: stress test bpf_get_stackidAlexei Starovoitov
increase stress by also calling bpf_get_stackid() from various *spin* functions Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-09samples/bpf: add bpf map stress testAlexei Starovoitov
this test calls bpf programs from different contexts: from inside of slub, from rcu, from pretty much everywhere, since it kprobes all spin_lock functions. It stresses the bpf hash and percpu map pre-allocation, deallocation logic and call_rcu mechanisms. User space part adding more stress by walking and deleting map elements. Note that due to nature bpf_load.c the earlier kprobe+bpf programs are already active while loader loads new programs, creates new kprobes and attaches them. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-08samples/bpf: test both pre-alloc and normal mapsAlexei Starovoitov
extend test coveraged to include pre-allocated and run-time alloc maps Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-08samples/bpf: add map_flags to bpf loaderAlexei Starovoitov
note old loader is compatible with new kernel. map_flags are optional Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-08samples/bpf: move ksym_search() into libraryAlexei Starovoitov
move ksym search from offwaketime into library to be reused in other tests Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-08samples/bpf: make map creation more verboseAlexei Starovoitov
map creation is typically the first one to fail when rlimits are too low, not enough memory, etc Make this failure scenario more verbose Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-20samples/bpf: offwaketime exampleAlexei Starovoitov
This is simplified version of Brendan Gregg's offwaketime: This program shows kernel stack traces and task names that were blocked and "off-CPU", along with the stack traces and task names for the threads that woke them, and the total elapsed time from when they blocked to when they were woken up. The combined stacks, task names, and total time is summarized in kernel context for efficiency. Example: $ sudo ./offwaketime | flamegraph.pl > demo.svg Open demo.svg in the browser as FlameGraph visualization. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-06samples/bpf: update tracex[23] examples to use per-cpu mapsAlexei Starovoitov
Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-06samples/bpf: unit test for BPF_MAP_TYPE_PERCPU_ARRAYtom.leiming@gmail.com
A sanity test for BPF_MAP_TYPE_PERCPU_ARRAY Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-06samples/bpf: unit test for BPF_MAP_TYPE_PERCPU_HASHMartin KaFai Lau
A sanity test for BPF_MAP_TYPE_PERCPU_HASH. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-16bpf: samples: exclude asm/sysreg.h for arm64Yang Shi
commit 338d4f49d6f7114a017d294ccf7374df4f998edc ("arm64: kernel: Add support for Privileged Access Never") includes sysreg.h into futex.h and uaccess.h. But, the inline assembly used by asm/sysreg.h is incompatible with llvm so it will cause BPF samples build failure for ARM64. Since sysreg.h is useless for BPF samples, just exclude it from Makefile via defining __ASM_SYSREG_H. Signed-off-by: Yang Shi <yang.shi@linaro.org> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-03bpf: add sample usages for persistent maps/progsDaniel Borkmann
This patch adds a couple of stand-alone examples on how BPF_OBJ_PIN and BPF_OBJ_GET commands can be used. Example with maps: # ./fds_example -F /sys/fs/bpf/m -P -m -k 1 -v 42 bpf: map fd:3 (Success) bpf: pin ret:(0,Success) bpf: fd:3 u->(1:42) ret:(0,Success) # ./fds_example -F /sys/fs/bpf/m -G -m -k 1 bpf: get fd:3 (Success) bpf: fd:3 l->(1):42 ret:(0,Success) # ./fds_example -F /sys/fs/bpf/m -G -m -k 1 -v 24 bpf: get fd:3 (Success) bpf: fd:3 u->(1:24) ret:(0,Success) # ./fds_example -F /sys/fs/bpf/m -G -m -k 1 bpf: get fd:3 (Success) bpf: fd:3 l->(1):24 ret:(0,Success) # ./fds_example -F /sys/fs/bpf/m2 -P -m bpf: map fd:3 (Success) bpf: pin ret:(0,Success) # ./fds_example -F /sys/fs/bpf/m2 -G -m -k 1 bpf: get fd:3 (Success) bpf: fd:3 l->(1):0 ret:(0,Success) # ./fds_example -F /sys/fs/bpf/m2 -G -m bpf: get fd:3 (Success) Example with progs: # ./fds_example -F /sys/fs/bpf/p -P -p bpf: prog fd:3 (Success) bpf: pin ret:(0,Success) bpf sock:4 <- fd:3 attached ret:(0,Success) # ./fds_example -F /sys/fs/bpf/p -G -p bpf: get fd:3 (Success) bpf: sock:4 <- fd:3 attached ret:(0,Success) # ./fds_example -F /sys/fs/bpf/p2 -P -p -o ./sockex1_kern.o bpf: prog fd:5 (Success) bpf: pin ret:(0,Success) bpf: sock:3 <- fd:5 attached ret:(0,Success) # ./fds_example -F /sys/fs/bpf/p2 -G -p bpf: get fd:3 (Success) bpf: sock:4 <- fd:3 attached ret:(0,Success) Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2015-10-28bpf: sample: define aarch64 specific registersYang Shi
Define aarch64 specific registers for building bpf samples correctly. Signed-off-by: Yang Shi <yang.shi@linaro.org> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-22samples: bpf: add bpf_perf_event_output exampleAlexei Starovoitov
Performance test and example of bpf_perf_event_output(). kprobe is attached to sys_write() and trivial bpf program streams pid+cookie into userspace via PERF_COUNT_SW_BPF_OUTPUT event. Usage: $ sudo ./bld_x64/samples/bpf/trace_output recv 2968913 events per sec Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-13bpf: add unprivileged bpf testsAlexei Starovoitov
Add new tests samples/bpf/test_verifier: unpriv: return pointer checks that pointer cannot be returned from the eBPF program unpriv: add const to pointer unpriv: add pointer to pointer unpriv: neg pointer checks that pointer arithmetic is disallowed unpriv: cmp pointer with const unpriv: cmp pointer with pointer checks that comparison of pointers is disallowed Only one case allowed 'void *value = bpf_map_lookup_elem(..); if (value == 0) ...' unpriv: check that printk is disallowed since bpf_trace_printk is not available to unprivileged unpriv: pass pointer to helper function checks that pointers cannot be passed to functions that expect integers If function expects a pointer the verifier allows only that type of pointer. Like 1st argument of bpf_map_lookup_elem() must be pointer to map. (applies to non-root as well) unpriv: indirectly pass pointer on stack to helper function checks that pointer stored into stack cannot be used as part of key passed into bpf_map_lookup_elem() unpriv: mangle pointer on stack 1 unpriv: mangle pointer on stack 2 checks that writing into stack slot that already contains a pointer is disallowed unpriv: read pointer from stack in small chunks checks that < 8 byte read from stack slot that contains a pointer is disallowed unpriv: write pointer into ctx checks that storing pointers into skb->fields is disallowed unpriv: write pointer into map elem value checks that storing pointers into element values is disallowed For example: int bpf_prog(struct __sk_buff *skb) { u32 key = 0; u64 *value = bpf_map_lookup_elem(&map, &key); if (value) *value = (u64) skb; } will be rejected. unpriv: partial copy of pointer checks that doing 32-bit register mov from register containing a pointer is disallowed unpriv: pass pointer to tail_call checks that passing pointer as an index into bpf_tail_call is disallowed unpriv: cmp map pointer with zero checks that comparing map pointer with constant is disallowed unpriv: write into frame pointer checks that frame pointer is read-only (applies to root too) unpriv: cmp of frame pointer checks that R10 cannot be using in comparison unpriv: cmp of stack pointer checks that Rx = R10 - imm is ok, but comparing Rx is not unpriv: obfuscate stack pointer checks that Rx = R10 - imm is ok, but Rx -= imm is not Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-18bpf: add bpf_redirect() helperAlexei Starovoitov
Existing bpf_clone_redirect() helper clones skb before redirecting it to RX or TX of destination netdev. Introduce bpf_redirect() helper that does that without cloning. Benchmarked with two hosts using 10G ixgbe NICs. One host is doing line rate pktgen. Another host is configured as: $ tc qdisc add dev $dev ingress $ tc filter add dev $dev root pref 10 u32 match u32 0 0 flowid 1:2 \ action bpf run object-file tcbpf1_kern.o section clone_redirect_xmit drop so it receives the packet on $dev and immediately xmits it on $dev + 1 The section 'clone_redirect_xmit' in tcbpf1_kern.o file has the program that does bpf_clone_redirect() and performance is 2.0 Mpps $ tc filter add dev $dev root pref 10 u32 match u32 0 0 flowid 1:2 \ action bpf run object-file tcbpf1_kern.o section redirect_xmit drop which is using bpf_redirect() - 2.4 Mpps and using cls_bpf with integrated actions as: $ tc filter add dev $dev root pref 10 \ bpf run object-file tcbpf1_kern.o section redirect_xmit integ_act classid 1 performance is 2.5 Mpps To summarize: u32+act_bpf using clone_redirect - 2.0 Mpps u32+act_bpf using redirect - 2.4 Mpps cls_bpf using redirect - 2.5 Mpps For comparison linux bridge in this setup is doing 2.1 Mpps and ixgbe rx + drop in ip_rcv - 7.8 Mpps Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-12bpf: fix build warnings and add function read_trace_pipe()Kaixu Xia
There are two improvements in this patch: 1. Fix the build warnings; 2. Add function read_trace_pipe() to print the result on the screen; Before this patch, we can get the result through /sys/kernel/de bug/tracing/trace_pipe and get nothing on the screen. By applying this patch, the result can be printed on the screen. $ ./tracex6 ... tracex6-705 [003] d..1 131.428593: : CPU-3 19981414 sshd-683 [000] d..1 131.428727: : CPU-0 221682321 sshd-683 [000] d..1 131.428821: : CPU-0 221808766 sshd-683 [000] d..1 131.428950: : CPU-0 221982984 sshd-683 [000] d..1 131.429045: : CPU-0 222111851 tracex6-705 [003] d..1 131.429168: : CPU-3 20757551 sshd-683 [000] d..1 131.429170: : CPU-0 222281240 sshd-683 [000] d..1 131.429261: : CPU-0 222403340 sshd-683 [000] d..1 131.429378: : CPU-0 222561024 ... Signed-off-by: Kaixu Xia <xiakaixu@huawei.com> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-10samples/bpf: example of get selected PMU counter valueKaixu Xia
This is a simple example and shows how to use the new ability to get the selected Hardware PMU counter value. Signed-off-by: Kaixu Xia <xiakaixu@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-27ebpf: Allow dereferences of PTR_TO_STACK registersAlex Gartrell
mov %rsp, %r1 ; r1 = rsp add $-8, %r1 ; r1 = rsp - 8 store_q $123, -8(%rsp) ; *(u64*)r1 = 123 <- valid store_q $123, (%r1) ; *(u64*)r1 = 123 <- previously invalid mov $0, %r0 exit ; Always need to exit And we'd get the following error: 0: (bf) r1 = r10 1: (07) r1 += -8 2: (7a) *(u64 *)(r10 -8) = 999 3: (7a) *(u64 *)(r1 +0) = 999 R1 invalid mem access 'fp' Unable to load program We already know that a register is a stack address and the appropriate offset, so we should be able to validate those references as well. Signed-off-by: Alex Gartrell <agartrell@fb.com> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-08samples: bpf: enable trace samples for s390xMichael Holzheu
The trace bpf samples do not compile on s390x because they use x86 specific fields from the "pt_regs" structure. Fix this and access the fields via new PT_REGS macros. Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-23bpf: BPF based latency tracingDaniel Wagner
BPF offers another way to generate latency histograms. We attach kprobes at trace_preempt_off and trace_preempt_on and calculate the time it takes to from seeing the off/on transition. The first array is used to store the start time stamp. The key is the CPU id. The second array stores the log2(time diff). We need to use static allocation here (array and not hash tables). The kprobes hooking into trace_preempt_on|off should not calling any dynamic memory allocation or free path. We need to avoid recursivly getting called. Besides that, it reduces jitter in the measurement. CPU 0 latency : count distribution 1 -> 1 : 0 | | 2 -> 3 : 0 | | 4 -> 7 : 0 | | 8 -> 15 : 0 | | 16 -> 31 : 0 | | 32 -> 63 : 0 | | 64 -> 127 : 0 | | 128 -> 255 : 0 | | 256 -> 511 : 0 | | 512 -> 1023 : 0 | | 1024 -> 2047 : 0 | | 2048 -> 4095 : 166723 |*************************************** | 4096 -> 8191 : 19870 |*** | 8192 -> 16383 : 6324 | | 16384 -> 32767 : 1098 | | 32768 -> 65535 : 190 | | 65536 -> 131071 : 179 | | 131072 -> 262143 : 18 | | 262144 -> 524287 : 4 | | 524288 -> 1048575 : 1363 | | CPU 1 latency : count distribution 1 -> 1 : 0 | | 2 -> 3 : 0 | | 4 -> 7 : 0 | | 8 -> 15 : 0 | | 16 -> 31 : 0 | | 32 -> 63 : 0 | | 64 -> 127 : 0 | | 128 -> 255 : 0 | | 256 -> 511 : 0 | | 512 -> 1023 : 0 | | 1024 -> 2047 : 0 | | 2048 -> 4095 : 114042 |*************************************** | 4096 -> 8191 : 9587 |** | 8192 -> 16383 : 4140 | | 16384 -> 32767 : 673 | | 32768 -> 65535 : 179 | | 65536 -> 131071 : 29 | | 131072 -> 262143 : 4 | | 262144 -> 524287 : 1 | | 524288 -> 1048575 : 364 | | CPU 2 latency : count distribution 1 -> 1 : 0 | | 2 -> 3 : 0 | | 4 -> 7 : 0 | | 8 -> 15 : 0 | | 16 -> 31 : 0 | | 32 -> 63 : 0 | | 64 -> 127 : 0 | | 128 -> 255 : 0 | | 256 -> 511 : 0 | | 512 -> 1023 : 0 | | 1024 -> 2047 : 0 | | 2048 -> 4095 : 40147 |*************************************** | 4096 -> 8191 : 2300 |* | 8192 -> 16383 : 828 | | 16384 -> 32767 : 178 | | 32768 -> 65535 : 59 | | 65536 -> 131071 : 2 | | 131072 -> 262143 : 0 | | 262144 -> 524287 : 1 | | 524288 -> 1048575 : 174 | | CPU 3 latency : count distribution 1 -> 1 : 0 | | 2 -> 3 : 0 | | 4 -> 7 : 0 | | 8 -> 15 : 0 | | 16 -> 31 : 0 | | 32 -> 63 : 0 | | 64 -> 127 : 0 | | 128 -> 255 : 0 | | 256 -> 511 : 0 | | 512 -> 1023 : 0 | | 1024 -> 2047 : 0 | | 2048 -> 4095 : 29626 |*************************************** | 4096 -> 8191 : 2704 |** | 8192 -> 16383 : 1090 | | 16384 -> 32767 : 160 | | 32768 -> 65535 : 72 | | 65536 -> 131071 : 32 | | 131072 -> 262143 : 26 | | 262144 -> 524287 : 12 | | 524288 -> 1048575 : 298 | | All this is based on the trace3 examples written by Alexei Starovoitov <ast@plumgrid.com>. Signed-off-by: Daniel Wagner <daniel.wagner@bmw-carit.de> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Ingo Molnar <mingo@kernel.org> Cc: linux-kernel@vger.kernel.org Cc: netdev@vger.kernel.org Acked-by: Alexei Starovoitov <ast@plumgrid.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-15bpf: introduce current->pid, tgid, uid, gid, comm accessorsAlexei Starovoitov
eBPF programs attached to kprobes need to filter based on current->pid, uid and other fields, so introduce helper functions: u64 bpf_get_current_pid_tgid(void) Return: current->tgid << 32 | current->pid u64 bpf_get_current_uid_gid(void) Return: current_gid << 32 | current_uid bpf_get_current_comm(char *buf, int size_of_buf) stores current->comm into buf They can be used from the programs attached to TC as well to classify packets based on current task fields. Update tracex2 example to print histogram of write syscalls for each process instead of aggregated for all. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-07bpf: allow programs to write to certain skb fieldsAlexei Starovoitov
allow programs read/write skb->mark, tc_index fields and ((struct qdisc_skb_cb *)cb)->data. mark and tc_index are generically useful in TC. cb[0]-cb[4] are primarily used to pass arguments from one program to another called via bpf_tail_call() which can be seen in sockex3_kern.c example. All fields of 'struct __sk_buff' are readable to socket and tc_cls_act progs. mark, tc_index are writeable from tc_cls_act only. cb[0]-cb[4] are writeable by both sockets and tc_cls_act. Add verifier tests and improve sample code. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-07bpf: make programs see skb->data == L2 for ingress and egressAlexei Starovoitov
eBPF programs attached to ingress and egress qdiscs see inconsistent skb->data. For ingress L2 header is already pulled, whereas for egress it's present. This is known to program writers which are currently forced to use BPF_LL_OFF workaround. Since programs don't change skb internal pointers it is safe to do pull/push right around invocation of the program and earlier taps and later pt->func() will not be affected. Multiple taps via packet_rcv(), tpacket_rcv() are doing the same trick around run_filter/BPF_PROG_RUN even if skb_shared. This fix finally allows programs to use optimized LD_ABS/IND instructions without BPF_LL_OFF for higher performance. tc ingress + cls_bpf + samples/bpf/tcbpf1_kern.o w/o JIT w/JIT before 20.5 23.6 Mpps after 21.8 26.6 Mpps Old programs with BPF_LL_OFF will still work as-is. We can now undo most of the earlier workaround commit: a166151cbe33 ("bpf: fix bpf helpers to use skb->mac_header relative offsets") Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-21samples/bpf: bpf_tail_call example for networkingAlexei Starovoitov
Usage: $ sudo ./sockex3 IP src.port -> dst.port bytes packets 127.0.0.1.42010 -> 127.0.0.1.12865 1568 8 127.0.0.1.59526 -> 127.0.0.1.33778 11422636 173070 127.0.0.1.33778 -> 127.0.0.1.59526 11260224828 341974 127.0.0.1.12865 -> 127.0.0.1.42010 1832 12 IP src.port -> dst.port bytes packets 127.0.0.1.42010 -> 127.0.0.1.12865 1568 8 127.0.0.1.59526 -> 127.0.0.1.33778 23198092 351486 127.0.0.1.33778 -> 127.0.0.1.59526 22972698518 698616 127.0.0.1.12865 -> 127.0.0.1.42010 1832 12 this example is similar to sockex2 in a way that it accumulates per-flow statistics, but it does packet parsing differently. sockex2 inlines full packet parser routine into single bpf program. This sockex3 example have 4 independent programs that parse vlan, mpls, ip, ipv6 and one main program that starts the process. bpf_tail_call() mechanism allows each program to be small and be called on demand potentially multiple times, so that many vlan, mpls, ip in ip, gre encapsulations can be parsed. These and other protocol parsers can be added or removed at runtime. TLVs can be parsed in similar manner. Note, tail_call_cnt dynamic check limits the number of tail calls to 32. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-21samples/bpf: bpf_tail_call example for tracingAlexei Starovoitov
kprobe example that demonstrates how future seccomp programs may look like. It attaches to seccomp_phase1() function and tail-calls other BPF programs depending on syscall number. Existing optimized classic BPF seccomp programs generated by Chrome look like: if (sd.nr < 121) { if (sd.nr < 57) { if (sd.nr < 22) { if (sd.nr < 7) { if (sd.nr < 4) { if (sd.nr < 1) { check sys_read } else { if (sd.nr < 3) { check sys_write and sys_open } else { check sys_close } } } else { } else { } else { } else { } else { } the future seccomp using native eBPF may look like: bpf_tail_call(&sd, &syscall_jmp_table, sd.nr); which is simpler, faster and leaves more room for per-syscall checks. Usage: $ sudo ./tracex5 <...>-366 [001] d... 4.870033: : read(fd=1, buf=00007f6d5bebf000, size=771) <...>-369 [003] d... 4.870066: : mmap <...>-369 [003] d... 4.870077: : syscall=110 (one of get/set uid/pid/gid) <...>-369 [003] d... 4.870089: : syscall=107 (one of get/set uid/pid/gid) sh-369 [000] d... 4.891740: : read(fd=0, buf=00000000023d1000, size=512) sh-369 [000] d... 4.891747: : write(fd=1, buf=00000000023d3000, size=512) sh-369 [000] d... 4.891747: : read(fd=1, buf=00000000023d3000, size=512) Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-13samples/bpf: fix in-source build of samples with clangBrenden Blanco
in-source build of 'make samples/bpf/' was incorrectly using default compiler instead of invoking clang/llvm. out-of-source build was ok. Fixes: a80857822b0c ("samples: bpf: trivial eBPF program in C") Signed-off-by: Brenden Blanco <bblanco@plumgrid.com> Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-16bpf: fix two bugs in verification logic when accessing 'ctx' pointerAlexei Starovoitov
1. first bug is a silly mistake. It broke tracing examples and prevented simple bpf programs from loading. In the following code: if (insn->imm == 0 && BPF_SIZE(insn->code) == BPF_W) { } else if (...) { // this part should have been executed when // insn->code == BPF_W and insn->imm != 0 } Obviously it's not doing that. So simple instructions like: r2 = *(u64 *)(r1 + 8) will be rejected. Note the comments in the code around these branches were and still valid and indicate the true intent. Replace it with: if (BPF_SIZE(insn->code) != BPF_W) continue; if (insn->imm == 0) { } else if (...) { // now this code will be executed when // insn->code == BPF_W and insn->imm != 0 } 2. second bug is more subtle. If malicious code is using the same dest register as source register, the checks designed to prevent the same instruction to be used with different pointer types will fail to trigger, since we were assigning src_reg_type when it was already overwritten by check_mem_access(). The fix is trivial. Just move line: src_reg_type = regs[insn->src_reg].type; before check_mem_access(). Add new 'access skb fields bad4' test to check this case. Fixes: 9bac3d6d548e ("bpf: allow extended BPF programs access skb fields") Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-16bpf: fix bpf helpers to use skb->mac_header relative offsetsAlexei Starovoitov
For the short-term solution, lets fix bpf helper functions to use skb->mac_header relative offsets instead of skb->data in order to get the same eBPF programs with cls_bpf and act_bpf work on ingress and egress qdisc path. We need to ensure that mac_header is set before calling into programs. This is effectively the first option from below referenced discussion. More long term solution for LD_ABS|LD_IND instructions will be more intrusive but also more beneficial than this, and implemented later as it's too risky at this point in time. I.e., we plan to look into the option of moving skb_pull() out of eth_type_trans() and into netif_receive_skb() as has been suggested as second option. Meanwhile, this solution ensures ingress can be used with eBPF, too, and that we won't run into ABI troubles later. For dealing with negative offsets inside eBPF helper functions, we've implemented bpf_skb_clone_unwritable() to test for unwriteable headers. Reference: http://thread.gmane.org/gmane.linux.network/359129/focus=359694 Fixes: 608cd71a9c7c ("tc: bpf: generalize pedit action") Fixes: 91bc4822c3d6 ("tc: bpf: add checksum helpers") Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: 1) Add BQL support to via-rhine, from Tino Reichardt. 2) Integrate SWITCHDEV layer support into the DSA layer, so DSA drivers can support hw switch offloading. From Floria Fainelli. 3) Allow 'ip address' commands to initiate multicast group join/leave, from Madhu Challa. 4) Many ipv4 FIB lookup optimizations from Alexander Duyck. 5) Support EBPF in cls_bpf classifier and act_bpf action, from Daniel Borkmann. 6) Remove the ugly compat support in ARP for ugly layers like ax25, rose, etc. And use this to clean up the neigh layer, then use it to implement MPLS support. All from Eric Biederman. 7) Support L3 forwarding offloading in switches, from Scott Feldman. 8) Collapse the LOCAL and MAIN ipv4 FIB tables when possible, to speed up route lookups even further. From Alexander Duyck. 9) Many improvements and bug fixes to the rhashtable implementation, from Herbert Xu and Thomas Graf. In particular, in the case where an rhashtable user bulk adds a large number of items into an empty table, we expand the table much more sanely. 10) Don't make the tcp_metrics hash table per-namespace, from Eric Biederman. 11) Extend EBPF to access SKB fields, from Alexei Starovoitov. 12) Split out new connection request sockets so that they can be established in the main hash table. Much less false sharing since hash lookups go direct to the request sockets instead of having to go first to the listener then to the request socks hashed underneath. From Eric Dumazet. 13) Add async I/O support for crytpo AF_ALG sockets, from Tadeusz Struk. 14) Support stable privacy address generation for RFC7217 in IPV6. From Hannes Frederic Sowa. 15) Hash network namespace into IP frag IDs, also from Hannes Frederic Sowa. 16) Convert PTP get/set methods to use 64-bit time, from Richard Cochran. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1816 commits) fm10k: Bump driver version to 0.15.2 fm10k: corrected VF multicast update fm10k: mbx_update_max_size does not drop all oversized messages fm10k: reset head instead of calling update_max_size fm10k: renamed mbx_tx_dropped to mbx_tx_oversized fm10k: update xcast mode before synchronizing multicast addresses fm10k: start service timer on probe fm10k: fix function header comment fm10k: comment next_vf_mbx flow fm10k: don't handle mailbox events in iov_event path and always process mailbox fm10k: use separate workqueue for fm10k driver fm10k: Set PF queues to unlimited bandwidth during virtualization fm10k: expose tx_timeout_count as an ethtool stat fm10k: only increment tx_timeout_count in Tx hang path fm10k: remove extraneous "Reset interface" message fm10k: separate PF only stats so that VF does not display them fm10k: use hw->mac.max_queues for stats fm10k: only show actual queues, not the maximum in hardware fm10k: allow creation of VLAN on default vid fm10k: fix unused warnings ...
generated by cgit v0.10.2 at 2024-11-16 11:06:04 (GMT)