| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lliubbo/blackfin
Pull blackfin updates from Bob Liu:
"One kbuild and a smp build fix."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lliubbo/blackfin:
kbuild: add symbol prefix arg to kallsyms
blackfin: smp: adapt to generic smp helpers
|
|
Commit 1f2bfbd00e466ff3489b2ca5cc75b1cccd14c123 ("kbuild: link of
vmlinux moved to a script") introduced in v3.5-rc1 broke kallsyms on
architectures which have symbol prefixes.
The --symbol-prefix argument used to be added to the KALLSYMS command
line from the architecture Makefile, however this isn't picked up by the
new scripts/link-vmlinux.sh. This resulted in symbols like
kallsyms_addresses being added which weren't correctly overriding the
weak symbols such as _kallsyms_addresses. These could then trigger
BUG_ONs in kallsyms code.
This is fixed by removing the KALLSYMS addition from the architecture
Makefile, and using CONFIG_SYMBOL_PREFIX in the link-vmlinux.sh script
to determine whether to add the --symbol-prefix argument.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Bob Liu <lliubbo@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Pull kbuild fixes from Michal Marek:
"These are two fixes that should go into 3.6. The link-vmlinux.sh one
is obvious.
The other one fixes make firmware_install with certain configurations,
where a file in the toplevel firmware tree gets installed first, and
$(INSTALL_FW_PATH)/$$(dir <file>) results in /lib/firmware/./, which
confuses make 3.82 for some reason."
* 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
firmware: fix directory creation rule matching with make 3.82
link-vmlinux.sh: Fix stray "echo" in error message
|
|
Attempting to run 'firmware_install' with CONFIG_USB_SERIAL_TI=y when
using make 3.82 results in an error
make[2]: *** No rule to make target `/lib/firmware/./', needed by
`/lib/firmware/ti_3410.fw'. Stop.
It turns out make 3.82 is picky when matching directory names with
trailing slashes as a result, where make 3.81 would handle this
correctly make 3.82 does not find the rule needed to create the
directory.
The './' seen in the error is added by $(dir) for firmware which
resides in the base firmware src directory, such as
ti_3410.fw.ihex. By performing $(dir) after we prepend the
$(INSTALL_FW_PATH) we can ensure we don't end up with a './' in the
middle of the path and the directory will be properly created.
This change works with make 3.81 and should work with previous
versions as well.
Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
|
|
Commit b13edf7ff2dd ("checkpatch: add checks for do {} while (0) macro
misuses") added a test that is overly simplistic for single statement
macros.
Macros that start with control tests should be enclosed in a do {} while
(0) loop.
Add the necessary control tests to the check.
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Andy Whitcroft <apw@canonical.com>
Tested-by: Franz Schrober <franzschrober@yahoo.de>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Fix fatal error in scripts/kernel-doc by ignoring the "__weak" attribute:
Error(drivers/pci/pci.c:2820): cannot understand prototype: 'char * __weak pcibios_setup(char *str) '
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When dumping "Code: " sections from an oops, the trapping instruction
%rip points to can be a string copy
2b:* f3 a5 rep movsl %ds:(%rsi),%es:(%rdi)
and the line contain a bunch of ":". Current "cut" selects only the and
the second field output looks funnily overlaid this:
2b:* f3 a5 rep movsl %ds <-- trapping instruction:(%rsi),%es:(%rdi
Fix this by selecting the remaining fields too.
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-kbuild@vger.kernel.org
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Reported-by: Jan Engelhardt <jengelh@inai.de>
Signed-off-by: Michal Marek <mmarek@suse.cz>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Martin Schwidefsky:
"This it the second batch of s390 patches for the 3.6 merge window.
Included is enablement for two common code changes, killable page
faults and sorted exception tables. And the regular set of cleanup
and bug fix patches."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: make use of user_mode() macro where possible
s390/mm: rename user_mode variable to addressing_mode
s390/mm: fix fault handling for page table walk case
s390/mm: make page faults killable
s390: update defconfig
s390/mm: downgrade page table after fork of a 31 bit process
s390/ipl: Use diagnose 8 command separation
s390/linker script: use RO_DATA_SECTION
s390/exceptions: sort exception table at build time
s390/debug: remove module_exit function / move EXPORT_SYMBOLs
|
|
Merge Andrew's first set of patches:
"Non-MM patches:
- lots of misc bits
- tree-wide have_clk() cleanups
- quite a lot of printk tweaks. I draw your attention to "printk:
convert the format for KERN_<LEVEL> to a 2 byte pattern" which
looks a bit scary. But afaict it's solid.
- backlight updates
- lib/ feature work (notably the addition and use of memweight())
- checkpatch updates
- rtc updates
- nilfs updates
- fatfs updates (partial, still waiting for acks)
- kdump, proc, fork, IPC, sysctl, taskstats, pps, etc
- new fault-injection feature work"
* Merge emailed patches from Andrew Morton <akpm@linux-foundation.org>: (128 commits)
drivers/misc/lkdtm.c: fix missing allocation failure check
lib/scatterlist: do not re-write gfp_flags in __sg_alloc_table()
fault-injection: add tool to run command with failslab or fail_page_alloc
fault-injection: add selftests for cpu and memory hotplug
powerpc: pSeries reconfig notifier error injection module
memory: memory notifier error injection module
PM: PM notifier error injection module
cpu: rewrite cpu-notifier-error-inject module
fault-injection: notifier error injection
c/r: fcntl: add F_GETOWNER_UIDS option
resource: make sure requested range is included in the root range
include/linux/aio.h: cpp->C conversions
fs: cachefiles: add support for large files in filesystem caching
pps: return PTR_ERR on error in device_create
taskstats: check nla_reserve() return
sysctl: suppress kmemleak messages
ipc: use Kconfig options for __ARCH_WANT_[COMPAT_]IPC_PARSE_VERSION
ipc: compat: use signed size_t types for msgsnd and msgrcv
ipc: allow compat IPC version field parsing if !ARCH_WANT_OLD_COMPAT_IPC
ipc: add COMPAT_SHMLBA support
...
|
|
These types of macros should not be used for either a single statement
nor should the macro end with a semi-colon.
Add tests for these conditions.
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Kernel style uses parenthesis around sizeof.
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
usleep_range() shouldn't use the same args for min and max.
Report it when it happens and when both args are decimal and min > max.
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Yuval Mintz <yuvalmin@broadcom.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Warn on non-standard signature styles.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Parenthesis alignment doesn't correctly check an existing line after an
inserted or modified line with an open parenthesis.
Fix it.
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-kconfig
Pull localmodconfig updates from Steven Rostedt:
"Improve localmodconfig to remove even more unused module configs.
These changes drastically improve the amount of module configs removed
from a config file. It also adds some debug that I can have users
easily enable if things do not work for them."
* tag 'localmodconfig-v3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-kconfig:
localmodconfig: Add debug environment variable LOCALMODCONFIG_DEBUG
localmodconfig: Check if configs are already set for selects
localmodconfig: Read in orig config file to avoid extra processing
localmodconfig: Comments and cleanup for streamline_config.pl
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Pull misc kbuild changes from Michal Marek:
"This is the non-critical part of kbuild for v3.6-rc1:
- Two new coccinelle semantic patches
- New scripts/tags.sh regexp
- scripts/config improvements that I mistakenly applied here instead
of in the kconfig branch (but there are no conflicts)
- Debian packaging fixes"
* 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
scripts/tags.sh: Teach [ce]tags about libtraceeevent error codes
scripts/coccinelle: list iterator variable semantic patch
scripts/coccinelle: Find threaded IRQs requests which are missing IRQF_ONESHOT
deb-pkg: Add all Makefiles to header package
deb-pkg: Install linux-firmware-image in versioned dir
scripts/config: add option to undef a symbol
scripts/config: allow alternate prefix to config option symbol
scripts/config: add option to not upper-case symbols
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Pull kconfig changes from Michal Marek:
- kconfig Makefile portability fixes
- menuconfig/nconfig help pager usability fix
- .gitignore cleanup
- quoting fix in scripts/config
- Makefile prints errors to stderr
- support for arbitrarily log lines in .config
- fix oldnoconfig description in 'make help'
* 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
kconfig: Document oldnoconfig to what it really does
nconf: add u, d command keys in scroll windows
menuconfig: add u, d, q command keys in text boxes
scripts/config: fix double-quotes un-escaping
kconfig: Print errors to stderr in the Makefile
kconfig: allow long lines in config file
kconfig: remove lkc_defs.h from .gitignore and dontdiff
xconfig: add quiet rule for moc
xconfig: use pkgconfig to find moc
kconfig: fix check-lxdialog for DLL platforms
kconfig: check ncursesw headers first in check-lxdialog
kconfig/nconf: fix compile with ncurses reentrant API
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Pull kbuild fix from Michal Marek:
"The main kbuild branch ended up with a single commit this time, a fix
to send errors to stderr"
* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
kbuild: Print errors to stderr
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB patches from Greg Kroah-Hartman:
"Here's the big USB patch set for the 3.6-rc1 merge window.
Lots of little changes in here, primarily for gadget controllers and
drivers. There's some scsi changes that I think also went in through
the scsi tree, but they merge just fine. All of these patches have
been in the linux-next tree for a while now.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"
Fix up trivial conflicts in include/scsi/scsi_device.h (same libata
conflict that Jeff had already encountered)
* tag 'usb-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (207 commits)
usb: Add USB_QUIRK_RESET_RESUME for all Logitech UVC webcams
usb: Add quirk detection based on interface information
usb: s3c-hsotg: Add header file protection macros in s3c-hsotg.h
USB: ehci-s5p: Add vbus setup function to the s5p ehci glue layer
USB: add USB_VENDOR_AND_INTERFACE_INFO() macro
USB: notify phy when root hub port connect change
USB: remove 8 bytes of padding from usb_host_interface on 64 bit builds
USB: option: add ZTE MF821D
USB: sierra: QMI mode MC7710 moved to qcserial
USB: qcserial: adding Sierra Wireless devices
USB: qcserial: support generic Qualcomm serial ports
USB: qcserial: make probe more flexible
USB: qcserial: centralize probe exit path
USB: qcserial: consolidate usb_set_interface calls
USB: ehci-s5p: Add support for device tree
USB: ohci-exynos: Add support for device tree
USB: ehci-omap: fix compile failure(v1)
usb: host: tegra: pass correct pointer in ehci_setup()
USB: ehci-fsl: Update ifdef check to work on 64-bit ppc
USB: serial: keyspan: Removed unrequired parentheses.
...
|
|
The make target 'oldnoconfig' is a misnomer. It doesn't set new symbols
to 'n', but instead sets it to their default values.
Unfortunately, assuming that it actually did this, broke ktest in some
of its tests. For example, the tests to create a minimum config and even
a config bisect, depends on removing various configs and using
oldnoconfig to get rid of other configs that may have depended on it.
But because some configs that it was trying to disable, were in fact
default enabled, this caused those configs to re-enable and corrupt the
test.
I thought about fixing oldnoconfig, but I'm afraid that people are
already dependent on its current behavior. Instead, I'm just updating
the documentation to state that it sets the new symbols to their default
values and not to 'n'.
Ideally, this would be called, 'olddefconfig' and we have an
'oldnoconfig' that actually disables the new symbols. But it's useless
for me now. If it changed, ktest would need to be consistent between
each version, and that would be to difficult to detect. I'll handle this
issue with ktest with other means.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
|
|
As we use a macro trick to sync each error codes with its
description string, teach [ce]tags to process them properly.
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/n/tip-qt5fv4pzigr2nnl27ydimg4h@git.kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
|
|
They function just like they do in less(1).
Also correct some discrepancy between the help text and the code wrt
function keys.
Signed-off-by: Benjamin Poirier <bpoirier@suse.de>
Signed-off-by: Michal Marek <mmarek@suse.cz>
|
|
They function just like they do in less(1).
Signed-off-by: Benjamin Poirier <bpoirier@suse.de>
Signed-off-by: Michal Marek <mmarek@suse.cz>
|
|
When reporting a string value, only the first double-quote was
un-escaped. We need to un-escape all escaped double-quotes.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Michal Marek <mmarek@suse.cz>
|
|
Follow x86 and MIPS and sort the main exception table at build time.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
Pull PCI changes from Bjorn Helgaas:
"Host bridge hotplug:
- Add MMCONFIG support for hot-added host bridges (Jiang Liu)
Device hotplug:
- Move fixups from __init to __devinit (Sebastian Andrzej Siewior)
- Call FINAL fixups for hot-added devices, too (Myron Stowe)
- Factor out generic code for P2P bridge hot-add (Yinghai Lu)
- Remove all functions in a slot, not just those with _EJx (Amos
Kong)
Dynamic resource management:
- Track bus number allocation (struct resource tree per domain)
(Yinghai Lu)
- Make P2P bridge 1K I/O windows work with resource reassignment
(Bjorn Helgaas, Yinghai Lu)
- Disable decoding while updating 64-bit BARs (Bjorn Helgaas)
Power management:
- Add PCIe runtime D3cold support (Huang Ying)
Virtualization:
- Add VFIO infrastructure (ACS, DMA source ID quirks) (Alex
Williamson)
- Add quirks for devices with broken INTx masking (Jan Kiszka)
Miscellaneous:
- Fix some PCI Express capability version issues (Myron Stowe)
- Factor out some arch code with a weak, generic, pcibios_setup()
(Myron Stowe)"
* tag 'for-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (122 commits)
PCI: hotplug: ensure a consistent return value in error case
PCI: fix undefined reference to 'pci_fixup_final_inited'
PCI: build resource code for M68K architecture
PCI: pciehp: remove unused pciehp_get_max_lnk_width(), pciehp_get_cur_lnk_width()
PCI: reorder __pci_assign_resource() (no change)
PCI: fix truncation of resource size to 32 bits
PCI: acpiphp: merge acpiphp_debug and debug
PCI: acpiphp: remove unused res_lock
sparc/PCI: replace pci_cfg_fake_ranges() with pci_read_bridge_bases()
PCI: call final fixups hot-added devices
PCI: move final fixups from __init to __devinit
x86/PCI: move final fixups from __init to __devinit
MIPS/PCI: move final fixups from __init to __devinit
PCI: support sizing P2P bridge I/O windows with 1K granularity
PCI: reimplement P2P bridge 1K I/O windows (Intel P64H2)
PCI: disable MEM decoding while updating 64-bit MEM BARs
PCI: leave MEM and IO decoding disabled during 64-bit BAR sizing, too
PCI: never discard enable/suspend/resume_early/resume fixups
PCI: release temporary reference in __nv_msi_ht_cap_quirk()
PCI: restructure 'pci_do_fixups()'
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial tree from Jiri Kosina:
"Trivial updates all over the place as usual."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (29 commits)
Fix typo in include/linux/clk.h .
pci: hotplug: Fix typo in pci
iommu: Fix typo in iommu
video: Fix typo in drivers/video
Documentation: Add newline at end-of-file to files lacking one
arm,unicore32: Remove obsolete "select MISC_DEVICES"
module.c: spelling s/postition/position/g
cpufreq: Fix typo in cpufreq driver
trivial: typo in comment in mksysmap
mach-omap2: Fix typo in debug message and comment
scsi: aha152x: Fix sparse warning and make printing pointer address more portable.
Change email address for Steve Glendinning
Btrfs: fix typo in convert_extent_bit
via: Remove bogus if check
netprio_cgroup.c: fix comment typo
backlight: fix memory leak on obscure error path
Documentation: asus-laptop.txt references an obsolete Kconfig item
Documentation: ManagementStyle: fixed typo
mm/vmscan: cleanup comment error in balance_pgdat
mm: cleanup on the comments of zone_reclaim_stat
...
|
|
Signed-off-by: Masatake YAMATO <yamato@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
If list_for_each_entry, etc complete a traversal of the list, the iterator
variable ends up pointing to an address at an offset from the list head,
and not a meaningful structure. Thus this value should not be used after
the end of the iterator.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Michal Marek <mmarek@suse.cz>
|
|
Signed-off-by: Michal Marek <mmarek@suse.cz>
|
|
For some config options (CONFIG_EXTRA_FIRMWARE, for example), the length
of a config file line can exceed the 1024 byte buffer.
Switch from fgets to compat_getline to fix. compat_getline is an
internally implimented getline work-alike for portability purposes.
Signed-off-by: Cody Schafer <cody@linux.vnet.ibm.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
|
|
Since commit 1c6c69525b ("genirq: Reject bogus threaded irq requests") threaded
IRQs without a primary handler need to be requested with IRQF_ONESHOT, otherwise
the request will fail. This semantic patch will help to statically identify
(and fix) such cases.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Michal Marek <mmarek@suse.cz>
|
|
Commit 5a6f8d2bd9e3392569ed6f29ea4d7210652f929b ("kconfig: nuke
LKC_DIRECT_LINK cruft") removed all traces of lkc_defs.h from the tree.
Remove its entries in dontdiff and kconfig's .gitignore file too.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Michal Marek <mmarek@suse.cz>
|
|
Also add a dependency on .tmp_qtcheck for KC_QT_MOC.
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Signed-off-by: Michal Marek <mmarek@suse.cz>
|
|
Various schemes exist to allow parallel installations of multiple major
versions of Qt (4.x with the previous 3.x and/or the upcoming 5.x).
QtCore.pc includes a moc_location variable which should be a more reliable
way to find moc.
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Signed-off-by: Michal Marek <mmarek@suse.cz>
|
|
... at least in the top-level Makefile and scripts/link-vmlinux.sh.
There are some more instances of the 'echo <error>; exit 1' pattern in
some arch Makefiles and kconfig.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
|
|
This resolves a merge issue with the option.c USB serial driver.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Import libraries on Cygwin and MinGW/MSYS use the .dll.a suffix, so
checking this suffix is necessary to make sure ncurses will still be
found when built without static libraries.
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Signed-off-by: Michal Marek <mmarek@suse.cz>
|
|
Commit 8c41e5e363db55d91aa3b1cdce4ab02ad9821de7 added a check for
ncursesw/curses.h for the case where ncurses and ncursesw are build
separately but only one is installed. But if both are installed,
the headers ncurses/curses.h and ncursesw/curses.h differ, and since
libncursesw will be found first, so should ncursesw/curses.h.
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Signed-off-by: Michal Marek <mmarek@suse.cz>
|
|
ESCDELAY is a global variable which is replaced by getter and setter
functions with NCURSES_REENTRANT. This fixes the following error:
nconf.c: In function ‘main’:
nconf.c:1506:2: error: lvalue required as left operand of assignment
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Signed-off-by: Michal Marek <mmarek@suse.cz>
|
|
I discovered that make deb-pkg does not add Makefile_32.cpu from
arch/x86 directory when doing i386 kernel build and package build.
Fix it by greedily adding all Makefiles.
Reported-by: Witold Baryluk <baryluk@smp.if.uj.edu.pl>
Signed-off-by: maximilian attems <max@stro.at>
Signed-off-by: Michal Marek <mmarek@suse.cz>
|
|
That way they don't file conflict with official firmware package:
trying to overwrite '/lib/firmware/qlogic/1040.bin', which is
also in package firmware-qlogic 0.35
..
Reported-by: Michael Prokop <mika@debian.org>
Signed-off-by: maximilian attems <max@stro.at>
Signed-off-by: Michal Marek <mmarek@suse.cz>
|
|
It is currently possible to enable, disable or modularise
a symbol. Also, an undefined symbol is reported as such.
Add a new command to undefine a symbol, by removing the
corresponding line from the .config file.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Michal Marek <mmarek@suse.cz>
|
|
While the Linux kernel uses 'CONFIG_' as a prefix to the config options
symbols, many projects that use kconfig may use different prefixes, or
even none at all.
If the CONFIG_ environment variable is set, use it as the prefix (empty
is a valid prefix). Otherwise, use the default prefix 'CONFIG_'.
This matches the support for alternate prefixes in scripts/kconfig/lkc.h,
which uses the same logic (albeit with a C define instead of an environment
variable).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Michal Marek <mmarek@suse.cz>
|
|
Currently, scripts/config mangles the config option symbols to always
be upper-case.
While the Linux kernel almost exclusively uses upper-case symbols, there
are still a few symbols with lower-case which this script can not handle:
$ grep -r -E '^[[:space:]]*config[[:space:]]+[^[:space:]]*[[:lower:]][^[:space:]=.]*$' . |wc -l
173
(that's roughly 1.3% of the symbols in 3.5-rc1)
Eg.:
./arch/arm/Kconfig:config VFPv3
./arch/powerpc/platforms/Kconfig.cputype:config 40x
./arch/x86/Kconfig:config SCx200HR_TIMER
./drivers/video/console/Kconfig:config FONT_8x8
./drivers/video/Kconfig:config NTSC_640x480
Also, other projects that use kconfig may allow for lower- or mixed-case
symbols, and may find easier to reuse this script than implement each
their own (potentially flawed) logic. For such a use-case, see:
http://marc.info/?l=linux-kbuild&m=133409932115848&w=2
This patch adds a new option to keep the given case, and keep the current
default to upper-case the symbols.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Michal Marek <mmarek@suse.cz>
|
|
This script lacks an executable bit.
Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is to get the USB fixes that were merged in the 3.5-rc4 tree into usb-next
so that everyone can sync up properly.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Using --help emits a concatenation error. Fix it.
Signed-off-by: Joe Perches <joe@perches.com>
Reported-by: Paul Bolle <pebolle@tiscali.nl>
Tested-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
If the environment variable LOCALMODCONFIG_DEBUG is set, then debug output
will appear in the make localmodconfig. This will simplify debugging what
people get with their output, as I can just tell people to do:
LOCALMODCONFIG_DEBUG=1 make localmodconfig 2>out.txt
and have them send me the out.txt. I'll be able to see why things are not
working as they think it should be.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
