| Age | Commit message (Collapse) | Author |
|---|
|
into for-linus2
|
|
commit fa1aa143ac4a ("selinux: extended permissions for ioctls")
introduced a bug into the handling of conditional rules, skipping the
processing entirely when the caller does not provide an extended
permissions (xperms) structure. Access checks from userspace using
/sys/fs/selinux/access do not include such a structure since that
interface does not presently expose extended permission information.
As a result, conditional rules were being ignored entirely on userspace
access requests, producing denials when access was allowed by
conditional rules in the policy. Fix the bug by only skipping
computation of extended permissions in this situation, not the entire
conditional rules processing.
Reported-by: Laurent Bigonville <bigon@debian.org>
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
[PM: fixed long lines in patch description]
Cc: stable@vger.kernel.org # 4.3
Signed-off-by: Paul Moore <pmoore@redhat.com>
|
|
Pull networking fixes from David Miller:
1) Fix null deref in xt_TEE netfilter module, from Eric Dumazet.
2) Several spots need to get to the original listner for SYN-ACK
packets, most spots got this ok but some were not. Whilst covering
the remaining cases, create a helper to do this. From Eric Dumazet.
3) Missiing check of return value from alloc_netdev() in CAIF SPI code,
from Rasmus Villemoes.
4) Don't sleep while != TASK_RUNNING in macvtap, from Vlad Yasevich.
5) Use after free in mvneta driver, from Justin Maggard.
6) Fix race on dst->flags access in dst_release(), from Eric Dumazet.
7) Add missing ZLIB_INFLATE dependency for new qed driver. From Arnd
Bergmann.
8) Fix multicast getsockopt deadlock, from WANG Cong.
9) Fix deadlock in btusb, from Kuba Pawlak.
10) Some ipv6_add_dev() failure paths were not cleaning up the SNMP6
counter state. From Sabrina Dubroca.
11) Fix packet_bind() race, which can cause lost notifications, from
Francesco Ruggeri.
12) Fix MAC restoration in qlcnic driver during bonding mode changes,
from Jarod Wilson.
13) Revert bridging forward delay change which broke libvirt and other
userspace things, from Vlad Yasevich.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (65 commits)
Revert "bridge: Allow forward delay to be cfgd when STP enabled"
bpf_trace: Make dependent on PERF_EVENTS
qed: select ZLIB_INFLATE
net: fix a race in dst_release()
net: mvneta: Fix memory use after free.
net: Documentation: Fix default value tcp_limit_output_bytes
macvtap: Resolve possible __might_sleep warning in macvtap_do_read()
mvneta: add FIXED_PHY dependency
net: caif: check return value of alloc_netdev
net: hisilicon: NET_VENDOR_HISILICON should depend on HAS_DMA
drivers: net: xgene: fix RGMII 10/100Mb mode
netfilter: nft_meta: use skb_to_full_sk() helper
net_sched: em_meta: use skb_to_full_sk() helper
sched: cls_flow: use skb_to_full_sk() helper
netfilter: xt_owner: use skb_to_full_sk() helper
smack: use skb_to_full_sk() helper
net: add skb_to_full_sk() helper and use it in selinux_netlbl_skbuff_setsid()
bpf: doc: correct arch list for supported eBPF JIT
dwc_eth_qos: Delete an unnecessary check before the function call "of_node_put"
bonding: fix panic on non-ARPHRD_ETHER enslave failure
...
|
|
Generalize selinux_skb_sk() added in commit 212cd0895330
("selinux: fix random read in selinux_ip_postroute_compat()")
so that we can use it other contexts.
Use it right away in selinux_netlbl_skbuff_setsid()
Fixes: ca6fb0651883 ("tcp: attach SYNACK messages to request sockets instead of listener")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull security subsystem update from James Morris:
"This is mostly maintenance updates across the subsystem, with a
notable update for TPM 2.0, and addition of Jarkko Sakkinen as a
maintainer of that"
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (40 commits)
apparmor: clarify CRYPTO dependency
selinux: Use a kmem_cache for allocation struct file_security_struct
selinux: ioctl_has_perm should be static
selinux: use sprintf return value
selinux: use kstrdup() in security_get_bools()
selinux: use kmemdup in security_sid_to_context_core()
selinux: remove pointless cast in selinux_inode_setsecurity()
selinux: introduce security_context_str_to_sid
selinux: do not check open perm on ftruncate call
selinux: change CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE default
KEYS: Merge the type-specific data with the payload data
KEYS: Provide a script to extract a module signature
KEYS: Provide a script to extract the sys cert list from a vmlinux file
keys: Be more consistent in selection of union members used
certs: add .gitignore to stop git nagging about x509_certificate_list
KEYS: use kvfree() in add_key
Smack: limited capability for changing process label
TPM: remove unnecessary little endian conversion
vTPM: support little endian guests
char: Drop owner assignment from i2c_driver
...
|
|
In commit e446f9dfe17b ("net: synack packets can be attached to request
sockets"), I missed one remaining case of invalid skb->sk->sk_security
access.
Dmitry Vyukov got a KASan report pointing to it.
Add selinux_skb_sk() helper that is responsible to get back to the
listener if skb is attached to a request socket, instead of
duplicating the logic.
Fixes: ca6fb0651883 ("tcp: attach SYNACK messages to request sockets instead of listener")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Paul Moore <paul@paul-moore.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The size of struct file_security_struct is 16byte at my setup.
But, the real allocation size for per each file_security_struct
is 64bytes in my setup that kmalloc min size is 64bytes
because ARCH_DMA_MINALIGN is 64.
This allocation is called every times at file allocation(alloc_file()).
So, the total slack memory size(allocated size - request size)
is increased exponentially.
E.g) Min Kmalloc Size : 64bytes, Unit : bytes
Allocated Size | Request Size | Slack Size | Allocation Count
---------------------------------------------------------------
770048 | 192512 | 577536 | 12032
At the result, this change reduce memory usage 42bytes per each
file_security_struct
Signed-off-by: Sangwoo <sangwoo2.park@lge.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
[PM: removed extra subject prefix]
Signed-off-by: Paul Moore <pmoore@redhat.com>
|
|
Fixes the following sparse warning:
security/selinux/hooks.c:3242:5: warning: symbol 'ioctl_has_perm' was
not declared. Should it be static?
Signed-off-by: Geliang Tang <geliangtang@163.com>
Acked-by: Jeff Vander Stoep <jeffv@google.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <pmoore@redhat.com>
|
|
sprintf returns the number of characters printed (excluding '\0'), so
we can use that and avoid duplicating the length computation.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <pmoore@redhat.com>
|
|
This is much simpler.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <pmoore@redhat.com>
|
|
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <pmoore@redhat.com>
|
|
security_context_to_sid() expects a const char* argument, so there's
no point in casting away the const qualifier of value.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <pmoore@redhat.com>
|
|
There seems to be a little confusion as to whether the scontext_len
parameter of security_context_to_sid() includes the nul-byte or
not. Reading security_context_to_sid_core(), it seems that the
expectation is that it does not (both the string copying and the test
for scontext_len being zero hint at that).
Introduce the helper security_context_str_to_sid() to do the strlen()
call and fix all callers.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <pmoore@redhat.com>
|
|
Use the ATTR_FILE attribute to distinguish between truncate()
and ftruncate() system calls. The two other cases where
do_truncate is called with a filp (and therefore ATTR_FILE is set)
are for coredump files and for open(O_TRUNC). In both of those cases
the open permission has already been checked during file open and
therefore does not need to be repeated.
Commit 95dbf739313f ("SELinux: check OPEN on truncate calls")
fixed a major issue where domains were allowed to truncate files
without the open permission. However, it introduced a new bug where
a domain with the write permission can no longer ftruncate files
without the open permission, even when they receive an already open
file.
Signed-off-by: Jeff Vander Stoep <jeffv@google.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <pmoore@redhat.com>
|
|
Change the SELinux checkreqprot default value to 0 so that SELinux
performs access control checking on the actual memory protections
used by the kernel and not those requested by the application.
Signed-off-by: Paul Moore <pmoore@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
This merge resolves conflicts with 75aec9df3a78 ("bridge: Remove
br_nf_push_frag_xmit_sk") as part of Eric Biederman's effort to improve
netns support in the network stack that reached upstream via David's
net-next tree.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Conflicts:
net/bridge/br_netfilter_hooks.c
|
|
since commit 8405a8fff3f8 ("netfilter: nf_qeueue: Drop queue entries on
nf_unregister_hook") all pending queued entries are discarded.
So we can simply remove all of the owner handling -- when module is
removed it also needs to unregister all its hooks.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
selinux needs few changes to accommodate fact that SYNACK messages
can be attached to a request socket, lacking sk_security pointer
(Only syncookies are still attached to a TCP_LISTEN socket)
Adds a new sk_listener() helper, and use it in selinux and sch_fq
Fixes: ca6fb0651883 ("tcp: attach SYNACK messages to request sockets instead of listener")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported by: kernel test robot <ying.huang@linux.intel.com>
Cc: Paul Moore <paul@paul-moore.com>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Cc: Eric Paris <eparis@parisplace.org>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Only pass the void *priv parameter out of the nf_hook_ops. That is
all any of the functions are interested now, and by limiting what is
passed it becomes simpler to change implementation details.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
With two exceptions (drm/qxl and drm/radeon) all vm_operations_struct
structs should be constant.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull security subsystem updates from James Morris:
"Highlights:
- PKCS#7 support added to support signed kexec, also utilized for
module signing. See comments in 3f1e1bea.
** NOTE: this requires linking against the OpenSSL library, which
must be installed, e.g. the openssl-devel on Fedora **
- Smack
- add IPv6 host labeling; ignore labels on kernel threads
- support smack labeling mounts which use binary mount data
- SELinux:
- add ioctl whitelisting (see
http://kernsec.org/files/lss2015/vanderstoep.pdf)
- fix mprotect PROT_EXEC regression caused by mm change
- Seccomp:
- add ptrace options for suspend/resume"
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (57 commits)
PKCS#7: Add OIDs for sha224, sha284 and sha512 hash algos and use them
Documentation/Changes: Now need OpenSSL devel packages for module signing
scripts: add extract-cert and sign-file to .gitignore
modsign: Handle signing key in source tree
modsign: Use if_changed rule for extracting cert from module signing key
Move certificate handling to its own directory
sign-file: Fix warning about BIO_reset() return value
PKCS#7: Add MODULE_LICENSE() to test module
Smack - Fix build error with bringup unconfigured
sign-file: Document dependency on OpenSSL devel libraries
PKCS#7: Appropriately restrict authenticated attributes and content type
KEYS: Add a name for PKEY_ID_PKCS7
PKCS#7: Improve and export the X.509 ASN.1 time object decoder
modsign: Use extract-cert to process CONFIG_SYSTEM_TRUSTED_KEYS
extract-cert: Cope with multiple X.509 certificates in a single file
sign-file: Generate CMS message as signature instead of PKCS#7
PKCS#7: Support CMS messages also [RFC5652]
X.509: Change recorded SKID & AKID to not include Subject or Issuer
PKCS#7: Check content type and versions
MAINTAINERS: The keyrings mailing list has moved
...
|
|
Many file systems that implement the show_options hook fail to correctly
escape their output which could lead to unescaped characters (e.g. new
lines) leaking into /proc/mounts and /proc/[pid]/mountinfo files. This
could lead to confusion, spoofed entries (resulting in things like
systemd issuing false d-bus "mount" notifications), and who knows what
else. This looks like it would only be the root user stepping on
themselves, but it's possible weird things could happen in containers or
in other situations with delegated mount privileges.
Here's an example using overlay with setuid fusermount trusting the
contents of /proc/mounts (via the /etc/mtab symlink). Imagine the use
of "sudo" is something more sneaky:
$ BASE="ovl"
$ MNT="$BASE/mnt"
$ LOW="$BASE/lower"
$ UP="$BASE/upper"
$ WORK="$BASE/work/ 0 0
none /proc fuse.pwn user_id=1000"
$ mkdir -p "$LOW" "$UP" "$WORK"
$ sudo mount -t overlay -o "lowerdir=$LOW,upperdir=$UP,workdir=$WORK" none /mnt
$ cat /proc/mounts
none /root/ovl/mnt overlay rw,relatime,lowerdir=ovl/lower,upperdir=ovl/upper,workdir=ovl/work/ 0 0
none /proc fuse.pwn user_id=1000 0 0
$ fusermount -u /proc
$ cat /proc/mounts
cat: /proc/mounts: No such file or directory
This fixes the problem by adding new seq_show_option and
seq_show_option_n helpers, and updating the vulnerable show_option
handlers to use them as needed. Some, like SELinux, need to be open
coded due to unusual existing escape mechanisms.
[akpm@linux-foundation.org: add lost chunk, per Kees]
[keescook@chromium.org: seq_show_option should be using const parameters]
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Acked-by: Jan Kara <jack@suse.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Cc: J. R. Okajima <hooanon05g@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
|
|
Create a common helper function to determine the label for a new inode.
This is then used by:
- may_create()
- selinux_dentry_init_security()
- selinux_inode_init_security()
This will change the behaviour of the functions slightly, bringing them
all into line.
Suggested-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <pmoore@redhat.com>
|
|
Ensure that we catch any cases where tclass == 0.
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <pmoore@redhat.com>
|
|
Initialize the security class of sock security structures
to the generic socket class. This is similar to what is
already done in inode_alloc_security for files. Generally
the sclass field will later by set by socket_post_create
or sk_clone or sock_graft, but for protocol implementations
that fail to call any of these for newly accepted sockets,
we want some sane default that will yield a legitimate
avc denied message with non-garbage values for class and
permission.
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <pmoore@redhat.com>
|
|
The inode_free_security() function just took the superblock's isec_lock
before checking and trying to remove the inode security struct from the
linked list. In many cases, the list was empty and so the lock taking
is wasteful as no useful work is done. On multi-socket systems with
a large number of CPUs, there can also be a fair amount of spinlock
contention on the isec_lock if many tasks are exiting at the same time.
This patch changes the code to check the state of the list first before
taking the lock and attempting to dequeue it. The list_del_init()
can be called more than once on the same list with no harm as long
as they are properly serialized. It should not be possible to have
inode_free_security() called concurrently with list_add(). For better
safety, however, we use list_empty_careful() here even though it is
still not completely safe in case that happens.
Signed-off-by: Waiman Long <Waiman.Long@hp.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <pmoore@redhat.com>
|
|
Add extended permissions logic to selinux. Extended permissions
provides additional permissions in 256 bit increments. Extend the
generic ioctl permission check to use the extended permissions for
per-command filtering. Source/target/class sets including the ioctl
permission may additionally include a set of commands. Example:
allowxperm <source> <target>:<class> ioctl unpriv_app_socket_cmds
auditallowxperm <source> <target>:<class> ioctl priv_gpu_cmds
Where unpriv_app_socket_cmds and priv_gpu_cmds are macros
representing commonly granted sets of ioctl commands.
When ioctl commands are omitted only the permissions are checked.
This feature is intended to provide finer granularity for the ioctl
permission that may be too imprecise. For example, the same driver
may use ioctls to provide important and benign functionality such as
driver version or socket type as well as dangerous capabilities such
as debugging features, read/write/execute to physical memory or
access to sensitive data. Per-command filtering provides a mechanism
to reduce the attack surface of the kernel, and limit applications
to the subset of commands required.
The format of the policy binary has been modified to include ioctl
commands, and the policy version number has been incremented to
POLICYDB_VERSION_XPERMS_IOCTL=30 to account for the format
change.
The extended permissions logic is deliberately generic to allow
components to be reused e.g. netlink filters
Signed-off-by: Jeff Vander Stoep <jeffv@google.com>
Acked-by: Nick Kralevich <nnk@google.com>
Signed-off-by: Paul Moore <pmoore@redhat.com>
|
|
into for-linus2
|
|
commit 66fc13039422ba7df2d01a8ee0873e4ef965b50b ("mm: shmem_zero_setup
skip security check and lockdep conflict with XFS") caused a regression
for SELinux by disabling any SELinux checking of mprotect PROT_EXEC on
shared anonymous mappings. However, even before that regression, the
checking on such mprotect PROT_EXEC calls was inconsistent with the
checking on a mmap PROT_EXEC call for a shared anonymous mapping. On a
mmap, the security hook is passed a NULL file and knows it is dealing
with an anonymous mapping and therefore applies an execmem check and no
file checks. On a mprotect, the security hook is passed a vma with a
non-NULL vm_file (as this was set from the internally-created shmem
file during mmap) and therefore applies the file-based execute check
and no execmem check. Since the aforementioned commit now marks the
shmem zero inode with the S_PRIVATE flag, the file checks are disabled
and we have no checking at all on mprotect PROT_EXEC. Add a test to
the mprotect hook logic for such private inodes, and apply an execmem
check in that case. This makes the mmap and mprotect checking
consistent for shared anonymous mappings, as well as for /dev/zero and
ashmem.
Cc: <stable@vger.kernel.org> # 4.1.x
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <pmoore@redhat.com>
|
|
At present we don't create efficient ebitmaps when importing NetLabel
category bitmaps. This can present a problem when comparing ebitmaps
since ebitmap_cmp() is very strict about these things and considers
these wasteful ebitmaps not equal when compared to their more
efficient counterparts, even if their values are the same. This isn't
likely to cause problems on 64-bit systems due to a bit of luck on
how NetLabel/CIPSO works and the default ebitmap size, but it can be
a problem on 32-bit systems.
This patch fixes this problem by being a bit more intelligent when
importing NetLabel category bitmaps by skipping over empty sections
which should result in a nice, efficient ebitmap.
Cc: stable@vger.kernel.org # 3.17
Signed-off-by: Paul Moore <pmoore@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull user namespace updates from Eric Biederman:
"Long ago and far away when user namespaces where young it was realized
that allowing fresh mounts of proc and sysfs with only user namespace
permissions could violate the basic rule that only root gets to decide
if proc or sysfs should be mounted at all.
Some hacks were put in place to reduce the worst of the damage could
be done, and the common sense rule was adopted that fresh mounts of
proc and sysfs should allow no more than bind mounts of proc and
sysfs. Unfortunately that rule has not been fully enforced.
There are two kinds of gaps in that enforcement. Only filesystems
mounted on empty directories of proc and sysfs should be ignored but
the test for empty directories was insufficient. So in my tree
directories on proc, sysctl and sysfs that will always be empty are
created specially. Every other technique is imperfect as an ordinary
directory can have entries added even after a readdir returns and
shows that the directory is empty. Special creation of directories
for mount points makes the code in the kernel a smidge clearer about
it's purpose. I asked container developers from the various container
projects to help test this and no holes were found in the set of mount
points on proc and sysfs that are created specially.
This set of changes also starts enforcing the mount flags of fresh
mounts of proc and sysfs are consistent with the existing mount of
proc and sysfs. I expected this to be the boring part of the work but
unfortunately unprivileged userspace winds up mounting fresh copies of
proc and sysfs with noexec and nosuid clear when root set those flags
on the previous mount of proc and sysfs. So for now only the atime,
read-only and nodev attributes which userspace happens to keep
consistent are enforced. Dealing with the noexec and nosuid
attributes remains for another time.
This set of changes also addresses an issue with how open file
descriptors from /proc/<pid>/ns/* are displayed. Recently readlink of
/proc/<pid>/fd has been triggering a WARN_ON that has not been
meaningful since it was added (as all of the code in the kernel was
converted) and is not now actively wrong.
There is also a short list of issues that have not been fixed yet that
I will mention briefly.
It is possible to rename a directory from below to above a bind mount.
At which point any directory pointers below the renamed directory can
be walked up to the root directory of the filesystem. With user
namespaces enabled a bind mount of the bind mount can be created
allowing the user to pick a directory whose children they can rename
to outside of the bind mount. This is challenging to fix and doubly
so because all obvious solutions must touch code that is in the
performance part of pathname resolution.
As mentioned above there is also a question of how to ensure that
developers by accident or with purpose do not introduce exectuable
files on sysfs and proc and in doing so introduce security regressions
in the current userspace that will not be immediately obvious and as
such are likely to require breaking userspace in painful ways once
they are recognized"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
vfs: Remove incorrect debugging WARN in prepend_path
mnt: Update fs_fully_visible to test for permanently empty directories
sysfs: Create mountpoints with sysfs_create_mount_point
sysfs: Add support for permanently empty directories to serve as mount points.
kernfs: Add support for always empty directories.
proc: Allow creating permanently empty directories that serve as mount points
sysctl: Allow creating permanently empty directories that serve as mountpoints.
fs: Add helper functions for permanently empty directories.
vfs: Ignore unlocked mounts in fs_fully_visible
mnt: Modify fs_fully_visible to deal with locked ro nodev and atime
mnt: Refactor the logic for mounting sysfs and proc in a user namespace
|
|
This allows for better documentation in the code and
it allows for a simpler and fully correct version of
fs_fully_visible to be written.
The mount points converted and their filesystems are:
/sys/hypervisor/s390/ s390_hypfs
/sys/kernel/config/ configfs
/sys/kernel/debug/ debugfs
/sys/firmware/efi/efivars/ efivarfs
/sys/fs/fuse/connections/ fusectl
/sys/fs/pstore/ pstore
/sys/kernel/tracing/ tracefs
/sys/fs/cgroup/ cgroup
/sys/kernel/security/ securityfs
/sys/fs/selinux/ selinuxfs
/sys/fs/smackfs/ smackfs
Cc: stable@vger.kernel.org
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull security subsystem updates from James Morris:
"The main change in this kernel is Casey's generalized LSM stacking
work, which removes the hard-coding of Capabilities and Yama stacking,
allowing multiple arbitrary "small" LSMs to be stacked with a default
monolithic module (e.g. SELinux, Smack, AppArmor).
See
https://lwn.net/Articles/636056/
This will allow smaller, simpler LSMs to be incorporated into the
mainline kernel and arbitrarily stacked by users. Also, this is a
useful cleanup of the LSM code in its own right"
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (38 commits)
tpm, tpm_crb: fix le64_to_cpu conversions in crb_acpi_add()
vTPM: set virtual device before passing to ibmvtpm_reset_crq
tpm_ibmvtpm: remove unneccessary message level.
ima: update builtin policies
ima: extend "mask" policy matching support
ima: add support for new "euid" policy condition
ima: fix ima_show_template_data_ascii()
Smack: freeing an error pointer in smk_write_revoke_subj()
selinux: fix setting of security labels on NFS
selinux: Remove unused permission definitions
selinux: enable genfscon labeling for sysfs and pstore files
selinux: enable per-file labeling for debugfs files.
selinux: update netlink socket classes
signals: don't abuse __flush_signals() in selinux_bprm_committed_creds()
selinux: Print 'sclass' as string when unrecognized netlink message occurs
Smack: allow multiple labels in onlycap
Smack: fix seq operations in smackfs
ima: pass iint to ima_add_violation()
ima: wrap event related data to the new ima_event_data structure
integrity: add validity checks for 'path' parameter
...
|
|
Pull networking updates from David Miller:
1) Add TX fast path in mac80211, from Johannes Berg.
2) Add TSO/GRO support to ibmveth, from Thomas Falcon
3) Move away from cached routes in ipv6, just like ipv4, from Martin
KaFai Lau.
4) Lots of new rhashtable tests, from Thomas Graf.
5) Run ingress qdisc lockless, from Alexei Starovoitov.
6) Allow servers to fetch TCP packet headers for SYN packets of new
connections, for fingerprinting. From Eric Dumazet.
7) Add mode parameter to pktgen, for testing receive. From Alexei
Starovoitov.
8) Cache access optimizations via simplifications of build_skb(), from
Alexander Duyck.
9) Move page frag allocator under mm/, also from Alexander.
10) Add xmit_more support to hv_netvsc, from KY Srinivasan.
11) Add a counter guard in case we try to perform endless reclassify
loops in the packet scheduler.
12) Extern flow dissector to be programmable and use it in new "Flower"
classifier. From Jiri Pirko.
13) AF_PACKET fanout rollover fixes, performance improvements, and new
statistics. From Willem de Bruijn.
14) Add netdev driver for GENEVE tunnels, from John W Linville.
15) Add ingress netfilter hooks and filtering, from Pablo Neira Ayuso.
16) Fix handling of epoll edge triggers in TCP, from Eric Dumazet.
17) Add an ECN retry fallback for the initial TCP handshake, from Daniel
Borkmann.
18) Add tail call support to BPF, from Alexei Starovoitov.
19) Add several pktgen helper scripts, from Jesper Dangaard Brouer.
20) Add zerocopy support to AF_UNIX, from Hannes Frederic Sowa.
21) Favor even port numbers for allocation to connect() requests, and
odd port numbers for bind(0), in an effort to help avoid
ip_local_port_range exhaustion. From Eric Dumazet.
22) Add Cavium ThunderX driver, from Sunil Goutham.
23) Allow bpf programs to access skb_iif and dev->ifindex SKB metadata,
from Alexei Starovoitov.
24) Add support for T6 chips in cxgb4vf driver, from Hariprasad Shenai.
25) Double TCP Small Queues default to 256K to accomodate situations
like the XEN driver and wireless aggregation. From Wei Liu.
26) Add more entropy inputs to flow dissector, from Tom Herbert.
27) Add CDG congestion control algorithm to TCP, from Kenneth Klette
Jonassen.
28) Convert ipset over to RCU locking, from Jozsef Kadlecsik.
29) Track and act upon link status of ipv4 route nexthops, from Andy
Gospodarek.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1670 commits)
bridge: vlan: flush the dynamically learned entries on port vlan delete
bridge: multicast: add a comment to br_port_state_selection about blocking state
net: inet_diag: export IPV6_V6ONLY sockopt
stmmac: troubleshoot unexpected bits in des0 & des1
net: ipv4 sysctl option to ignore routes when nexthop link is down
net: track link-status of ipv4 nexthops
net: switchdev: ignore unsupported bridge flags
net: Cavium: Fix MAC address setting in shutdown state
drivers: net: xgene: fix for ACPI support without ACPI
ip: report the original address of ICMP messages
net/mlx5e: Prefetch skb data on RX
net/mlx5e: Pop cq outside mlx5e_get_cqe
net/mlx5e: Remove mlx5e_cq.sqrq back-pointer
net/mlx5e: Remove extra spaces
net/mlx5e: Avoid TX CQE generation if more xmit packets expected
net/mlx5e: Avoid redundant dev_kfree_skb() upon NOP completion
net/mlx5e: Remove re-assignment of wq type in mlx5e_enable_rq()
net/mlx5e: Use skb_shinfo(skb)->gso_segs rather than counting them
net/mlx5e: Static mapping of netdev priv resources to/from netdev TX queues
net/mlx4_en: Use HW counters for rx/tx bytes/packets in PF device
...
|
|
While testing my netfilter changes I noticed several files where
recompiling unncessarily because they unncessarily included
netfilter.h.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Before calling into the filesystem, vfs_setxattr calls
security_inode_setxattr, which ends up calling selinux_inode_setxattr in
our case. That returns -EOPNOTSUPP whenever SBLABEL_MNT is not set.
SBLABEL_MNT was supposed to be set by sb_finish_set_opts, which sets it
only if selinux_is_sblabel_mnt returns true.
The selinux_is_sblabel_mnt logic was broken by eadcabc697e9 "SELinux: do
all flags twiddling in one place", which didn't take into the account
the SECURITY_FS_USE_NATIVE behavior that had been introduced for nfs
with eb9ae686507b "SELinux: Add new labeling type native labels".
This caused setxattr's of security labels over NFSv4.2 to fail.
Cc: stable@kernel.org # 3.13
Cc: Eric Paris <eparis@redhat.com>
Cc: David Quigley <dpquigl@davequigley.com>
Reported-by: Richard Chan <rc556677@outlook.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
[PM: added the stable dependency]
Signed-off-by: Paul Moore <pmoore@redhat.com>
|
|
Remove unused permission definitions from SELinux.
Many of these were only ever used in pre-mainline
versions of SELinux, prior to Linux 2.6.0. Some of them
were used in the legacy network or compat_net=1 checks
that were disabled by default in Linux 2.6.18 and
fully removed in Linux 2.6.30.
Permissions never used in mainline Linux:
file swapon
filesystem transition
tcp_socket { connectto newconn acceptfrom }
node enforce_dest
unix_stream_socket { newconn acceptfrom }
Legacy network checks, removed in 2.6.30:
socket { recv_msg send_msg }
node { tcp_recv tcp_send udp_recv udp_send rawip_recv rawip_send dccp_recv dccp_send }
netif { tcp_recv tcp_send udp_recv udp_send rawip_recv rawip_send dccp_recv dccp_send }
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <pmoore@redhat.com>
|
|
Support per-file labeling of sysfs and pstore files based on
genfscon policy entries. This is safe because the sysfs
and pstore directory tree cannot be manipulated by userspace,
except to unlink pstore entries.
This provides an alternative method of assigning per-file labeling
to sysfs or pstore files without needing to set the labels from
userspace on each boot. The advantages of this approach are that
the labels are assigned as soon as the dentry is first instantiated
and userspace does not need to walk the sysfs or pstore tree and
set the labels on each boot. The limitations of this approach are
that the labels can only be assigned based on pathname prefix matching.
You can initially assign labels using this mechanism and then change
them at runtime via setxattr if allowed to do so by policy.
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Suggested-by: Dominick Grift <dac.override@gmail.com>
Acked-by: Jeff Vander Stoep <jeffv@google.com>
Signed-off-by: Paul Moore <pmoore@redhat.com>
|
|
Add support for per-file labeling of debugfs files so that
we can distinguish them in policy. This is particularly
important in Android where certain debugfs files have to be writable
by apps and therefore the debugfs directory tree can be read and
searched by all.
Since debugfs is entirely kernel-generated, the directory tree is
immutable by userspace, and the inodes are pinned in memory, we can
simply use the same approach as with proc and label the inodes from
policy based on pathname from the root of the debugfs filesystem.
Generalize the existing labeling support used for proc and reuse it
for debugfs too.
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <pmoore@redhat.com>
|
|
Update the set of SELinux netlink socket class definitions to match
the set of netlink protocols implemented by the kernel. The
ip_queue implementation for the NETLINK_FIREWALL and NETLINK_IP6_FW protocols
was removed in d16cf20e2f2f13411eece7f7fb72c17d141c4a84, so we can remove
the corresponding class definitions as this is dead code. Add new
classes for NETLINK_ISCSI, NETLINK_FIB_LOOKUP, NETLINK_CONNECTOR,
NETLINK_NETFILTER, NETLINK_GENERIC, NETLINK_SCSITRANSPORT, NETLINK_RDMA,
and NETLINK_CRYPTO so that we can distinguish among sockets created
for each of these protocols. This change does not define the finer-grained
nlsmsg_read/write permissions or map specific nlmsg_type values to those
permissions in the SELinux nlmsgtab; if finer-grained control of these
sockets is desired/required, that can be added as a follow-on change.
We do not define a SELinux class for NETLINK_ECRYPTFS as the implementation
was removed in 624ae5284516870657505103ada531c64dba2a9a.
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <pmoore@redhat.com>
|
|
selinux_bprm_committed_creds()->__flush_signals() is not right, we
shouldn't clear TIF_SIGPENDING unconditionally. There can be other
reasons for signal_pending(): freezing(), JOBCTL_PENDING_MASK, and
potentially more.
Also change this code to check fatal_signal_pending() rather than
SIGNAL_GROUP_EXIT, it looks a bit better.
Now we can kill __flush_signals() before it finds another buggy user.
Note: this code looks racy, we can flush a signal which was sent after
the task SID has been updated.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Paul Moore <pmoore@redhat.com>
|
|
This prints the 'sclass' field as string instead of index in unrecognized netlink message.
The textual representation makes it easier to distinguish the right class.
Signed-off-by: Marek Milkovic <mmilkovi@redhat.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
[PM: 80-char width fixes]
Signed-off-by: Paul Moore <pmoore@redhat.com>
|
|
Instead of using a vector of security operations
with explicit, special case stacking of the capability
and yama hooks use lists of hooks with capability and
yama hooks included as appropriate.
The security_operations structure is no longer required.
Instead, there is a union of the function pointers that
allows all the hooks lists to use a common mechanism for
list management while retaining typing. Each module
supplies an array describing the hooks it provides instead
of a sparsely populated security_operations structure.
The description includes the element that gets put on
the hook list, avoiding the issues surrounding individual
element allocation.
The method for registering security modules is changed to
reflect the information available. The method for removing
a module, currently only used by SELinux, has also changed.
It should be generic now, however if there are potential
race conditions based on ordering of hook removal that needs
to be addressed by the calling module.
The security hooks are called from the lists and the first
failure is returned.
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Acked-by: John Johansen <john.johansen@canonical.com>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Paul Moore <paul@paul-moore.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Acked-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: James Morris <james.l.morris@oracle.com>
|
|
Add a list header for each security hook. They aren't used until
later in the patch series. They are grouped together in a structure
so that there doesn't need to be an external address for each.
Macro-ize the initialization of the security_operations
for each security module in anticipation of changing out
the security_operations structure.
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Acked-by: John Johansen <john.johansen@canonical.com>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Paul Moore <paul@paul-moore.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Acked-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: James Morris <james.l.morris@oracle.com>
|
|
The security.h header file serves two purposes,
interfaces for users of the security modules and
interfaces for security modules. Users of the
security modules don't need to know about what's
in the security_operations structure, so pull it
out into it's own header, lsm_hooks.h
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Acked-by: John Johansen <john.johansen@canonical.com>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Paul Moore <paul@paul-moore.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Acked-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: James Morris <james.l.morris@oracle.com>
|
|
inode_follow_link now takes an inode and rcu flag as well as the
dentry.
inode is used in preference to d_backing_inode(dentry), particularly
in RCU-walk mode.
selinux_inode_follow_link() gets dentry_has_perm() and
inode_has_perm() open-coded into it so that it can call
avc_has_perm_flags() in way that is safe if LOOKUP_RCU is set.
Calling avc_has_perm_flags() with rcu_read_lock() held means
that when avc_has_perm_noaudit calls avc_compute_av(), the attempt
to rcu_read_unlock() before calling security_compute_av() will not
actually drop the RCU read-lock.
However as security_compute_av() is completely in a read_lock()ed
region, it should be safe with the RCU read-lock held.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
This allows MAY_NOT_BLOCK to be passed, in RCU-walk mode, through
the new avc_has_perm_flags() to avc_audit() and thence the slow_avc_audit.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
No ->inode_follow_link() methods use the nameidata arg, and
it is about to become private to namei.c.
So remove from all inode_follow_link() functions.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull fourth vfs update from Al Viro:
"d_inode() annotations from David Howells (sat in for-next since before
the beginning of merge window) + four assorted fixes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
RCU pathwalk breakage when running into a symlink overmounting something
fix I_DIO_WAKEUP definition
direct-io: only inc/dec inode->i_dio_count for file systems
fs/9p: fix readdir()
VFS: assorted d_backing_inode() annotations
VFS: fs/inode.c helpers: d_inode() annotations
VFS: fs/cachefiles: d_backing_inode() annotations
VFS: fs library helpers: d_inode() annotations
VFS: assorted weird filesystems: d_inode() annotations
VFS: normal filesystems (and lustre): d_inode() annotations
VFS: security/: d_inode() annotations
VFS: security/: d_backing_inode() annotations
VFS: net/: d_inode() annotations
VFS: net/unix: d_backing_inode() annotations
VFS: kernel/: d_inode() annotations
VFS: audit: d_backing_inode() annotations
VFS: Fix up some ->d_inode accesses in the chelsio driver
VFS: Cachefiles should perform fs modifications on the top layer only
VFS: AF_UNIX sockets should call mknod on the top layer only
|
