summaryrefslogtreecommitdiff
path: root/sound/pci/hda
AgeCommit message (Collapse)Author
2014-05-05Merge branch 'for-linus' into for-nextTakashi Iwai
... for applying the further HDMI fixes.
2014-05-05ALSA: hda - hdmi: Set converter channel count even without sinkAnssi Hannula
Since commit 1df5a06a ("ALSA: hda - hdmi: Fix programmed active channel count") channel count is no longer being set if monitor_present is 0. This is because setting the count was moved after the CA value is determined, which is only after the monitor_present check in hdmi_setup_audio_infoframe(). Unfortunately, in some cases, such as with a non-spec-compliant codec or with a problematic video driver, monitor_present is always 0. As a specific example, this seems to happen with gen1 ATV (SiI1390 codec), causing left-channel-only stereo playback (multi-channel playback has apparently never worked with this codec despite it reporting 8 channels, reason unknown). Simply setting converter channel count without setting the pin infoframe and channel mapping as well does not theoretically make much sense as this will just mean they are out-of-sync and multichannel playback will have a wrong channel mapping. However, adding back just setting the converter channel count even in no-monitor case is the safest change which at least fixes the stereo playback regression on SiI1390 codec. Do that. Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi> Reported-by: Stephan Raue <stephan@openelec.tv> Tested-by: Stephan Raue <stephan@openelec.tv> Cc: <stable@vger.kernel.org> # 3.12+ Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-04-30ALSA: hda - add headset mic detect quirk for a Dell laptopHui Wang
When we plug a 3-ring headset on the Dell machine (VID: 0x10ec0255, SID: 0x1028067e), the headset mic can't be detected, after apply this patch, the headset mic can work well. BugLink: https://bugs.launchpad.net/bugs/1297581 Cc: David Henningsson <david.henningsson@canonical.com> Cc: stable@vger.kernel.org Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-04-29ALSA: hda - Suppress CORBRP clear on Nvidia controller chipsTakashi Iwai
The recent commit (ca460f86521) changed the CORB RP reset procedure to follow the specification with a couple of sanity checks. Unfortunately, Nvidia controller chips seem not following this way, and spew the warning messages like: snd_hda_intel 0000:00:10.1: CORB reset timeout#1, CORBRP = 0 This patch adds the workaround for such chips. It just skips the new reset procedure for the known broken chips. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-04-28ALSA: hda/realtek - Add new codec ALC293/ALC3235 UAJ supportedKailang Yang
New codec ALC293/ALC3235 support multifunction jacks. It used for menual select the input device. Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-04-28ALSA: hda/realtek - Add two codecs alias name for DellKailang Yang
Add ALC3235 ALC3263. Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-04-28ALSA: hda - add headset mic detect quirk for a Dell laptopHui Wang
When we plug a 3-ring headset on the Dell machine (VID: 0x10ec0255, SID: 0x10280674), the headset mic can't be detected, after apply this patch, the headset mic can work well. BugLink: https://bugs.launchpad.net/bugs/1297581 Cc: David Henningsson <david.henningsson@canonical.com> Cc: stable@vger.kernel.org Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-04-16ALSA: hda/realtek - Add headset Mic support for Dell machineKailang Yang
Signed-off-by: Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-04-16ALSA: hda - add headset mic detect quirk for a Dell laptopHui Wang
When we plug a 3-ring headset on the Dell machine (VID: 0x10ec0255, SID: 0x1028067f), the headset mic can't be detected, after apply this patch, the headset mic can work well. BugLink: https://bugs.launchpad.net/bugs/1297581 Cc: David Henningsson <david.henningsson@canonical.com> Cc: stable@vger.kernel.org Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-04-14ALSA: hda/realtek - Add support of ALC288 codecKailang Yang
Signed-off-by: Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-04-09ALSA: hda - Make full_reset booleanThierry Reding
The full_reset argument to azx_init_chip() carries boolean rather than numerical information, so update the type to reflect that. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-04-09ALSA: hda - add headset mic detect quirk for a Dell laptopHui Wang
When we plug a 3-ring headset on the Dell machine (VID: 0x10ec0283, SID: 0x10280667), the headset mic can't be detected, after apply this patch, the headset mic can work well. BugLink: https://bugs.launchpad.net/bugs/1297581 Cc: David Henningsson <david.henningsson@canonical.com> Cc: stable@vger.kernel.org Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-04-09ALSA: hda - Use runtime helper to check active state.Dylan Reid
From azx_interrupt, use the helper to check if the device is active instead of checking the state. This will do the right thing if runtime pm is disabled in addition to if the device is suspended. Signed-off-by: Dylan Reid <dgreid@chromium.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-04-08ALSA: hda - Do not assign streams in reverse orderAnssi Hannula
Currently stream numbers are assigned in reverse order. Unfortunately commit 7546abfb8e1f9933b5 ("ALSA: hda - Increment default stream numbers for AMD HDMI controllers") assumed this was not the case (specifically, it had the "old cards had single device only" => "extra unused stream numbers do not matter" assumption), causing non-working audio regressions for AMD Radeon HDMI users. Change the stream numbers to be assigned in forward order. The benefit is that regular audio playback will still work even if the assumed stream count is too high, downside is that a too high stream count may remain hidden. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=77002 Reported-by: Christian Güdel <cg@dmesg.ch> Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi> Tested-by: Christian Güdel <cg@dmesg.ch> # 3.14 Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-04-08ALSA: hda/realtek - Add eapd shutup to ALC283Kailang Yang
Add eapd shutup function to alc283_shutup. It could avoid pop noise from speaker. Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-04-08ALSA: hda/realtek - Change model name alias for ChromeOSKailang Yang
Chrome OS was use model name of alc283-dac-wcaps for loading model as default. Change the model name to same as model name of Chrome OS for future support. Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-04-07ALSA: hda/realtek - Improve HP depop when system change power state on ↵Kailang Yang
Chromebook It is better to change Mic2-Vref to manual mode. Manual control Mic2-Vref will solve pop noise issue. It will improve pop noise for power on, power off, S3 and resume. Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-04-03ALSA: hda - Fix silent speaker output due to mute LED fixupTakashi Iwai
The recent fixups for HP laptops to support the mute LED made the speaker output silent on some machines. It turned out that they use the NID 0x18 for the speaker while it's also used for controlling the LED via VREF bits although the current driver code blindly assumes that such a node is a mic pin (where 0x18 is usually so). This patch fixes the problem by only changing the VREF bits and keeping the other pin ctl bits. Reported-and-tested-by: Hui Wang <hui.wang@canonical.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-04-03ALSA: hda/realtek - Fixed single output machine get empty hp senseKailang Yang
If it only has single output of HP out of machine. The driver parser will copy hp_pins to line_out_pins. hp_pins will empty for alc283_init and alc283_shutup functions. This will cause not have value for hp_pin_sense. Add check line_out_type code will solve it . Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-31ALSA: hda - Enable beep for ASUS 1015EW. Trevor King
The `lspci -nnvv` output contains (wrapped for line length): 00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller [8086:1e20] (rev 04) Subsystem: ASUSTeK Computer Inc. Device [1043:115d] Signed-off-by: W. Trevor King <wking@tremily.us> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-26ALSA: hda - add headset mic detect quirks for three Dell laptopsHui Wang
When we plug a 3-ring headset on the Dell machines (VID: 0x10ec0255, SID: 0x10280632; VID: 0x10ec0293, SID: 0x1028062c; VID: 0x10ec0293, SID: 0x1028062e), the headset mic can't be detected, after apply this patch, the headset mic can work well. BugLink: https://bugs.launchpad.net/bugs/1297581 Cc: David Henningsson <david.henningsson@canonical.com> Cc: stable@vger.kernel.org Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-25ALSA: hda - Inform the unexpectedly ignored pins by auto-parserTakashi Iwai
The auto-parser may ignore some pins that could be valid when they don't match with the assumption or if there are way too many pins assigned to the same output type. So far, such a pin has been silently ignored, but it's better to leave a message, which would help for debugging and understanding the problem. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-20ALSA: hda - verify pin:cvt connection on preparing a stream for Intel HDMI codecMengdong Lin
This is a temporary fix for some Intel HDMI codecs to avoid no sound output for a resuming playback after S3. After S3, the audio driver restores pin:cvt connection selections by snd_hda_codec_resume_cache(). However this can happen before the gfx side is ready and such connect selection is overlooked by HW. After gfx is ready, the pins make the default selection again. And this will cause multiple pins share a same convertor and mute control will affect each other. Thus a resumed audio playback become silent after S3. This patch verifies pin:cvt connection on preparing a stream, to assure the pin selects the right convetor and an assigned convertor is not shared by other unused pins. Apply this fix-up on Haswell, Broadwell and Valleyview (Baytrail). We need this temporary fix before a reliable software communication channel is established between audio and gfx, to sync audio/gfx operations. Signed-off-by: Mengdong Lin <mengdong.lin@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-18Merge branch 'topic/alc28x' into for-nextTakashi Iwai
2014-03-18ALSA: hda/realtek - Restore default value for ALC282Kailang Yang
Restore the registers to prevent the abnormal digital power supply rising ratio/sequence to the codec and causing the incorrect default codec register restoration during initialization. Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-18Merge branch 'topic/alc28x' into for-nextTakashi Iwai
2014-03-18ALSA: hda/realtek - Fix the noise after suspend and resume on ALC282 codecKailang Yang
When the power state of ALC283 codec goes to D3 or return back to D0, it gives a noise via headphone output. To follow the depop procedure, it will be better. Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-18ALSA: hda/realtek - Restore default value for ALC283Kailang Yang
Restore the registers to prevent the abnormal digital power supply rising ratio/sequence to the codec and causing the incorrect default codec register restoration during initialization. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=71861 Signed-off-by: Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-13Merge tag 'asoc-v3.15' of ↵Takashi Iwai
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next ASoC: Updates for v3.15 Quite a busy release for ASoC this time, more on janitorial work than exciting new features but welcome nontheless: - Lots of cleanups from Takashi for enumerations; the original API for these was error prone so he's refactored lots of code to use more modern APIs which avoid issues. - Elimination of the ASoC level wrappers for I2C and SPI moving us closer to converting to regmap completely and avoiding some randconfig hassle. - Provide both manually and transparently locked DAPM APIs rather than a mix of the two fixing some concurrency issues. - Start converting CODEC drivers to use separate bus interface drivers rather than having them all in one file helping avoid dependency issues. - DPCM support for Intel Haswell and Bay Trail platforms. - Lots of work on improvements for simple-card, DaVinci and the Renesas rcar drivers. - New drivers for Analog Devices ADAU1977, TI PCM512x and parts of the CSR SiRF SoC.
2014-03-11ALSA: hda - initialize audio InfoFrame to be all zeroMengdong Lin
This patch initialized the local audio InfoFrame variable 'ai' to be all zero, thus the data bytes will indicate "Refer to Stream Header" by default. Signed-off-by: Mengdong Lin <mengdong.lin@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-07ALSA: hda - Fix loud click noise with IdeaPad 410YTakashi Iwai
Lenovo IdeaPad 410Y with ALC282 codec makes loud click noises at boot and shutdown. Also, it wrongly misdetects the acpi_thinkpad hook. This patch adds a device-specific fixup for disabling the shutup callback that is the cause of the click noise and also avoiding the thinpad_helper calls. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=71511 Reported-and-tested-by: Guilherme Amadio <guilherme.amadio@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-05ALSA: hda - Use analog beep for Thinkpads with AD1984 codecsTakashi Iwai
For making the driver behavior compatible with the earlier kernels, use the analog beep in the loopback path instead of the digital beep. Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-05ALSA: hda - Add missing loopback merge path for AD1884/1984 codecsTakashi Iwai
The mixer widget (NID 0x20) of AD1884 and AD1984 codecs isn't connected directly to the actual I/O paths but only via another mixer widget (NID 0x21). We need a similar fix as we did for AD1882. Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-04ALSA: hda - add automute fix for another dell AIO modelHui Wang
When plugging a headphone or headset, lots of noise is heard from internal speaker, after changing the automute via amp instead of pinctl, the noise disappears. BugLink: https://bugs.launchpad.net/bugs/1268468 Cc: David Henningsson <david.henningsson@canonical.com> Cc: stable@vger.kernel.org Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-03ALSA: hda/realtek - Add headset quirk for Dell DTKailang Yang
This quirk is needed for the headset microphone to work. Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-03ALSA: hda - Added inverted digital-mic handling for Acer TravelMate 8371Marius Knaust
Signed-off-by: Marius Knaust <marius.knaust@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-03ALSA: hda - Mark reg op args as iomemDylan Reid
The ops to read and write registers should take pointers labeled as __iomem. Thanks to the sparse bot for catching this. Signed-off-by: Dylan Reid <dgreid@chromium.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-03ALSA: hda - Rename reg access ops in hda_controller_opsDylan Reid
Using readl, writel, etc. resulted in some architectures, such as s390, expanding the member names into zpci_writel. Obviously not the intended result. Fixes s390 build breakage introduced by "4083081 - ALSA: hda - Allow different ops to read/write registers" Signed-off-by: Dylan Reid <dgreid@chromium.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-03ALSA: hda - Make azx_attach_pcm_stream staticDylan Reid
It is only used in hda_controller.c now. Signed-off-by: Dylan Reid <dgreid@chromium.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-01ALSA: hda - remove PCI dependency in KconfigDylan Reid
Remove the dependency on CONFIG_PCI for building hda codec drivers so that platforms with HDA attach via means other than PCI can use them. This was as suggested by tiwai. Signed-off-by: Dylan Reid <dgreid@chromium.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-01ALSA: hda - Move codec create to hda_controllerDylan Reid
Codec creation and stream initialization can be shared between hda_intel and hda platform drivers. Move it and the static functions it depends on to hda_controller.c. Signed-off-by: Dylan Reid <dgreid@chromium.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-01ALSA: hda - Move azx_interrupt to hda_controllerDylan Reid
This code will be reused by an hda_platform driver as it has no PCI dependencies. This allows update_rirb to be static as all users are now in hda_controller.c. Signed-off-by: Dylan Reid <dgreid@chromium.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-01ALSA: hda - Add position_check opDylan Reid
This op will be used by hda_intel to do the position check. Takashi wisely suggested adding this before moving the interrupt handler to common HDA code. Having this callback prevents the need to move the hda_intel specific delayed interrupt handling with the irq. Signed-off-by: Dylan Reid <dgreid@chromium.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-01ALSA: hda - Move low level functions to hda_controllerDylan Reid
Share more code from hda_intel. This moves the link control and initialization to hda_controller. The code will also be used by an hda platform driver. Signed-off-by: Dylan Reid <dgreid@chromium.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-01ALSA: hda - move alloc_cmd_io to hda_controllerDylan Reid
Combining the call to alloc_cmd_io with the allocate pages function removes an extra interface between hda_intel and hda_controller. Signed-off-by: Dylan Reid <dgreid@chromium.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-01ALSA: hda - Relocate RIRB/CORB interface to hda_controllerDylan Reid
This is done to allow an HDA platform driver to reuse the code. A few of the interfaces added to hda_controller will disappear in following commits as their users are also moved to hda_controller. Signed-off-by: Dylan Reid <dgreid@chromium.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-01ALSA: hda - Move the dsp loader to hda_controllerDylan Reid
Moving the DSP loading functionality to hda_controller.c means that the dsp lock doesn't need to be shared in hda_intel and hda_controller. The forthcoming platform driver doesn't need the DSP loading code, but sharing it doesn't hurt. Tested on Chromebook Pixel's ca0132 that uses the DSP loader. Signed-off-by: Dylan Reid <dgreid@chromium.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-01ALSA: hda - Pull pages allocation to hda_controllerDylan Reid
Pull allocation from first_init to a new function in hda_controller.c. Short term this will allow the dsp loader to be moved as well. In later commits it will allow the same allocation to be used by the platform hda driver. Signed-off-by: Dylan Reid <dgreid@chromium.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-01ALSA: hda - Add hda_controller.c and move pcm ops from hda_intelDylan Reid
Pull the pcm_ops and the functions they use into a new hda_controller file. This is done to allow for other hda implementations besides PCI to use the same ops. The hda_controller file will house functionality related to HDA but independent of the bus used to talk to the controller. This currently shares dsp locking across the two files. This will be remedied in a following commit. Signed-off-by: Dylan Reid <dgreid@chromium.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-01ALSA: hda - Add pcm_mmap_prepare op.Dylan Reid
Adding this op allows the X86 specific mmap operation to help in hda_intel without needing a CONFIG_X86 in future non-PCI hda drivers. Signed-off-by: Dylan Reid <dgreid@chromium.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
generated by cgit v0.10.2 at 2024-11-15 09:45:36 (GMT)