summaryrefslogtreecommitdiff
path: root/sound/soc/sh
AgeCommit message (Collapse)Author
2016-07-01Merge remote-tracking branches 'asoc/fix/rcar', 'asoc/fix/rt5670' and ↵Mark Brown
'asoc/fix/wm8940' into asoc-linus
2016-05-27ASoC: rsnd: open 31bit of SSICKR maskKuninori Morimoto
SSICKR (Gen2) / BRGCKR (Gen3) 31bit mask should be opened, because BRGB (= for 48kHz) might select it. Special thanks Yokoyama-san Reported-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-05-12rcar: src: skip disabled-SRC nodesSergei Shtylyov
The current device tree representation of the R-Car Sample Rate Converters (SRC) assumes that they are numbered consecutively, starting from 0. Alas, this is not the case with the R8A7794 SoC where SRC0 isn't present. In order to keep the existing device trees working, I'm suggesting to use a disabled node for SRC0. Teach the SRC probe to just skip disabled nodes. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-05-10ASoC: rsnd: don't use prohibited number to PDMACHCRn.SRSKuninori Morimoto
Current rsnd_dmapp_get_id() returns 0xFF as error code if system used strange connection. It will be used as PDMACHCRn.SRS, but 0xFF is prohibited number. In order not to use prohibited number, this patch indicates error message and returns 0x00 (same as SSI00) in error case. Special thanks to Dung-san. Reported-by: Nguyen Viet Dung <nv-dung@jinso.co.jp> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-04-28ASoC: rsnd: count .probe/.remove for rsnd_mod_call()Kuninori Morimoto
Current rsnd_mod_call is counting its calling count to avoid unbalanced function pair calling for error cases (ex init <-> quit). SSI parent is now controlled as "mod" on current rsnd driver. Because of this reason, SSI .remove function will be called twice if it was used as SSI parent when user tried unbind. But probe/remove pair were not counted. This patch counts probe/remove functions to avoid it. Special thans Hiep Reported-by: Hiep Cao Minh <cm-hiep@jinso.co.jp> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-04-20ASoC: rsnd: Remove CLK_IS_ROOTStephen Boyd
This flag is a no-op now (see commit 47b0eeb3dc8a "clk: Deprecate CLK_IS_ROOT", 2016-02-02) so remove it. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-12ASoC: rsnd: add simplified module explanationKuninori Morimoto
Renesas sound driver user needs to read its datasheet when create DT. But it is difficult to understand, because it has many modules (SRC/CTU/MIX/DVC/SSIU/SSI/AudioDMAC/AudioDMACperiperi), and many features (Asynchronous/Synchronous mode on SRC, CTU matrix, DVC volume settings feature, Multi-SSI/TDM-SSI, etc). This patch adds simplified explanation to help setting/understanding. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-07ASoC: rsnd: CMD TIMSEL support for CaptureKuninori Morimoto
CMD.out should use same as SRC.out for TIMSEL settings, but it cares Playback case only. This patch fixup it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-07ASoC: rsnd: SRC TIMSEL support for CaptureKuninori Morimoto
SRC has Sync/Async mode, and it can't use Sync mode when Capture with CMD. In Async mode, it needs to care about in/out SRC rate for settings, but current driver supporting Playback case only. This patch supports Capture case. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-07ASoC: rsnd: add rsnd_src_get_in/out_rate()Kuninori Morimoto
SRC will convert rate, and then, CMD and SSI want to know its rate (= SRC.in / SRC.out) for each purpose. Current driver is supporting only Playback, but SRC+Capture support needs more flexibility. This patch adds rsnd_src_get_in/out_rate() for it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-07ASoC: rsnd: rename rsnd_enable_sync_convert() to rsnd_src_sync_is_enabled()Kuninori Morimoto
rsnd_enable_sync_convert() is for checking, not for setting. In order to avoid confusion, this patch renamed it to rsnd_src_sync_is_enabled() Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-07ASoC: rsnd: SRC function parameter uses "mod" instead of "src"Kuninori Morimoto
To reduce confusion, SRC uses "mod" instead of "src" as function parameter Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-07ASoC: rsnd: SRC sync mode is not related to clock master modeKuninori Morimoto
SRC sync mode needs to control its clock (= for in/out). 1st but codec side clock Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-07ASoC: rsnd: don't enable SRC Sync mode when Capture with CMDKuninori Morimoto
It can't use SRC Synchronous convert when Capture if it uses CMD, because no one provide out side clocks. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-05ASoC: rsnd: add CTU supportKuninori Morimoto
This patch adds CTU (= Channel Transfer Unit) support on Renesas R-Car sound driver. It can Down/Up mixing and splitter. You need to check R-Car datasheet especially CTUn_CPMDR/CTUn_SV0xR/CTUn_SV1xR/CTUn_SV2xR/CTUn_SV3xR for setting parameter. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-05ASoC: rsnd: add rsnd_runtime_channel_xxx()Kuninori Morimoto
Current SSI is supporting Normal SSI/Multi mode SSI/TDM mode SSI and its behavior is based on input channels. This input channel might be converted by CTU, and SSI needs to be Multi SSI mode / TDM SSI mode if 6ch input EX) 6ch input, CTU for 2ch, playback 6ch 6ch 2ch 2ch 2ch 2ch -> SRC -> CTU -> MIX -> DVC -> SSIU -> SSI EX) 6ch input, no CTU, Multi SSI, playback 6ch 6ch 6ch 6ch 6ch 2ch -> SRC -> CTU -> MIX -> DVC -> SSIU -> SSI0/SSI1/SSI2 Current driver is using rsnd_get_adinr_chan() / rsnd_get_slot_width() for this purpose, but it is complicated enough without meaning. This patch adds new rsnd_runtime_channel_xxx() which is caring CTU/Multi SSI. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-05ASoC: rsnd: add CTU basic supportKuninori Morimoto
This patch adds Renesas R-Car sound CTU (= Channel Transfer Unit) very basic support, but not yet enough feature at this point. Because CTU support needs more complex channel function for each modules. To avoid complex patch reviewing, this patch picked up very basic part only. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-05ASoC: rsnd: tidyup rsnd_ssiu_init_gen2()Kuninori Morimoto
remove unnecessary variable Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-05ASoC: rsrc-card: add convert channels supportKuninori Morimoto
Renesas sound device has CTU (= Channel Transfer Unit), and sound card needs its support. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-05ASoC: rsnd: don't call update callback if it was NULLKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-02ASoC: sh: rcar: rsrc-card: don't open code of_device_get_match_data()Wolfram Sang
This change will also make Coverity happy by avoiding a theoretical NULL pointer dereference; yet another reason is to use the above helper function to tighten the code and make it more readable. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-02ASoC: sh: rcar: core: don't open code of_device_get_match_data()Wolfram Sang
This change will also make Coverity happy by avoiding a theoretical NULL pointer dereference; yet another reason is to use the above helper function to tighten the code and make it more readable. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-02ASoC: rsnd: rsnd_write() / rsnd_bset() uses regmap _force_ functionKuninori Morimoto
Some R-Car sound requests picky register access which needs *force* register write. Some status register needs to set 1 to clear status, but we might read 1 from its register. In such case, current regmap does nothing and driver will be forever loop To reduce code complexity, this patch uses regmap _force_ function for all register access. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-02Merge branch 'topic/update-bits' of ↵Mark Brown
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap into asoc-rcar
2016-02-19ASoC: rsnd: judge work SSI in runtimeKuninori Morimoto
Current rsnd supports multi SSI (maximum 4 SSI for 8ch), and, it should determine whether using each SSI or not in runtime. All SSIs are not used even if there are 4 SSI in case of stereo. Current driver setups un-used SSI in such case. It is no problem, but not needed. This patch judges it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-19ASoC: rsnd: judge multi SSI in runtimeKuninori Morimoto
Current rsnd supports multi SSI (maximum 4 SSI for 8ch), and, it should determine whether using each SSI or not in runtime. Current judgement is vague, and had broken by c308abe45e2("ASoC: rsnd: rsnd_ssi_is_multi_slave() macro uses rsnd_ssi_multi_slaves()") This patch makes clean it, and solve this issue. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-19ASoC: rsnd: move rsnd_ssi_irq() positionKuninori Morimoto
prepare for runtime judging for SSI work Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-19ASoC: rsnd: Parent SSI attach is not needed if not clock masterKuninori Morimoto
Parent SSI is needed if it is PIN sharing and clock master, otherwise, not needed. But, whether clockk master is judged on .set_fmt, thus, it can't call rsnd_ssi_parent_attach() on .probe. Now, .pcm_new will be called after .set_fmt, so this patch reuses it at this point. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-19ASoC: rsnd: tidyup SSI init/start sequenceKuninori Morimoto
SSI want to have SSIWSR settings and SSICR settings without EN bit when init, and SSICR EN bit only when start timing. Otherwise, SSI output signal might be unstable. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-19ASoC: rsnd: add missing .irq callback for DMAKuninori Morimoto
commit b5b442abd9d5 ("ASoC: rsnd: add .irq callback") added .irq callback but SSI DMA is missing it. This patch adds it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-19ASoC: rsnd: fixup forever loop bug on SSIKuninori Morimoto
commit b5b442abd9 ("ASoC: rsnd: add .irq callback") added .irq support, and it cares both parent SSI and normal SSI. But it should care only normal SSI. Otherwise SSI might be forever loop if SSI is used as both parent SSI and normal SSI (= 2 users), and if under/over run error happen. Because irq disable do nothing in such case. This patch solve this issue. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-19ASoC: rsnd: SSI function parameter uses "mod" instead of "ssi"Kuninori Morimoto
To reduce confusion, SSI uses "mod" instead of "ssi" as function parameter Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-19ASoC: rsnd: indicates status failed SSIKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-19ASoC: rsnd: setup SRC_ROUTE_MODE0 before SRC_SRCIRKuninori Morimoto
SRC_ROUTE_MODE0 determines whether to use SRC. Thus, it should be setup before SRC_SRCIR. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-19ASoC: rsnd: rename RSND_DVC_CHANNELS to RSND_MAX_CHANNELSKuninori Morimoto
The channels number is not only for DVC. Let's rename it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-09ASoC: rsnd: rsnd_ssi_is_multi_slave() macro uses rsnd_ssi_multi_slaves()Kuninori Morimoto
b4c83b171 ("ASoC: rsnd: add Multi channel support") added Multi channel support, and current rsnd_ssi_is_multi_slave()'s check method is !SSI equals SSIM1/2/3. But, SSI parent also hit to this macro. Because of this reason, some stream which needs SSI parent clock can't work correctly. This patch uses rsnd_ssi_multi_slaves() to solve this issue. This issue was reported by Dung. Reported-by: Nguyen Viet Dung <nv-dung@jinso.co.jp> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-01-27ASoC: rsnd: add .irq callbackKuninori Morimoto
Current rsnd driver has .init/.start/.stop/.quit callbacks, and it needs many IPs (SRC/CTU/MUX/DVC/CMD/SSIU/SSI). Because of these relationship, it might get unnecessary error IRQ when start/stop. This patch adds new .irq callback and control IRQ enable/disable timing to avoid it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-01-27ASoC: rsnd: don't auto-recover when under/over run errorKuninori Morimoto
Renesas R-Car sound needs recovery (= restart) when under/over run error occurred, and current driver tries it on under/over run error handler automatically. But this recovery should be handled by userland, not kernel. This patch stops XRUN when under/over run error occur, and will leave the recovery of HW in userland. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-01-22ASoC: rsnd: disable SRC.out/in in same timeKuninori Morimoto
commit b761bf272bce ("ASoC: rsnd: disable SRC.out only when stop timing") disabled SRC.out/in in different timing, but was based on picky HW information. Now, we have confirmed that we can disable both in the same time. This patch do it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-01-22ASoC: rsnd: tidyup Playback/Capture sequenceKuninori Morimoto
Based on datasheet sequence Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-01-22ASoC: rsnd: ctu: settings matches to datasheetKuninori Morimoto
Current CTU settings was rough. This patch makes it match to datasheet. But do nothing at this point. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-01-22ASoC: rsnd: ctu: add rsnd_ctu_halt()Kuninori Morimoto
Based on datasheet process Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-01-22ASoC: rsnd: ctu: add rsnd_mix_activation()Kuninori Morimoto
Based on datasheet Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-01-22ASoC: rsnd: attach Audio-DMAC-periperi correctlyKuninori Morimoto
SSI/SRC will try to attach DMAC as Audio-DMAC or Audio-DMAC-periperi. It is fixed IP, but will be attached to each streams as different module in case of MUX (= multi sound path will be merged). This patch solves this issue. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-01-22ASoC: rsnd: each mod has status again for CTU/MUX supportKuninori Morimoto
SSI will be used as normal SSI or as clock parent SSI. Therefor, rsnd driver wants to control SSI and parent SSI separately. Otherwise it can't use Playback/Capture in the same time. And it has been done by c2dc47d5cf("ASoC: rsnd: rsnd_dai_stream has each mod's status insted of rsnd_mod") before. OTOH, rsnd driver doesn't want to control CTU/MUX/DVC/SSIU/SSI in separately. Otherwise, these will be re-initialized during playing if MUX merges 2 sounds. Because of these picky reasons, this patch re-defines status on each mod, and add new parent_ssi_status on rsnd_dai_stream. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-01-22ASoC: rsnd: select each SRC correctly for CMD data pathKuninori Morimoto
To select CMD data patch, it should use correct SRC from each stream in MUX case. But current code is selecting SRC from fixed stream. This patch solves this issue. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-01-22ASoC: rsnd: don't overwrite io on rsnd_cmd_init()Kuninori Morimoto
Current rsnd_cmd_init() overwrites "io" which will be used end of this function. This patch solved this issue. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-01-22ASoC: rsnd: always call probe/remove for MUXKuninori Morimoto
CTU/MUX/DVC/SSIU/SSI/Audio-DMAC-periperi might be used under multipath. So, probe()/remove() need to be called multiple times. This patch allows it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-01-22ASoC: rsnd: try to connect connected mod is not errorKuninori Morimoto
If system uses CTU/MUX, CTU/MUX/DVC will try to connect same CMD to system, but it is not error in this case. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-01-22ASoC: rsnd: don't update status if rsnd_mod_call() doesn't matchKuninori Morimoto
If system uses CTU/MUX, and if probe error happened, it will try to call rsnd_dai_call(remove, ...). Then, MUX/DVC/SSIU/SSI might be called without calling rsnd_dai_call(probe, ...). Then, each mod status might be un-matched. It doesn't call un-matched remove function by this patch. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
generated by cgit v0.10.2 at 2024-11-18 17:12:24 (GMT)