summaryrefslogtreecommitdiff
path: root/sound/soc
AgeCommit message (Collapse)Author
2012-03-04ASoC: neo1973: fix neo1973 wm8753 initializationDenis 'GNUtoo' Carikli
The neo1973 driver had wrong codec name which prevented the "sound card" from appearing. Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
2012-02-23ASoC: i.MX SSI: Fix DSP_A format.Javier Martin
According to i.MX27 Reference Manual (p 1593) TXBIT0 bit selects whether the most significant or the less significant part of the data word written to the FIFO is transmitted. As DSP_A is the same as DSP_B with a data offset of 1 bit, it doesn't make any sense to remove TXBIT0 bit here. Signed-off-by: Javier Martin <javier.martin@vista-silicon.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
2012-02-23ASoC: dapm: Check for bias level when powering downMark Brown
Recent enhancements in the bias management means that we might not be in standby when the CODEC is idle and can have active widgets without being in full power mode but the shutdown functionality assumes these things. Add checks for the bias level at each stage so that we don't do transitions other than the ON->PREPARE->STANDBY->OFF ones that the drivers are expecting. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2012-02-21ASoC: ak4642: fixup HeadPhone L/R dapm settingsKuninori Morimoto
Current ak4642 driver had wrong dapm settings for headphone L/R. If you select headphone L, and select R after that, headphone L setting was removed by R settings. This patch fixes it up. It provides just "Headphone Enable" to user side Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-14ASoC: wm8962: Fix sidetone enumeration textsMark Brown
The sidetone enumeration texts have left and right swapped. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
2012-02-09ASoC: fsi: fixup fsi_pointer() calculation methodKuninori Morimoto
current fsi_pointer() calculation was not correct for FSI driver. This patch fix it up. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-08ASoC: wm8994: Disable line output discharge prior to ramping VMIDMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-08ASoC: wm8994: Fix typo in VMID ramp settingMark Brown
The VMID ramp rate is supposed to be 0x3, not 11b. Fix that. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
2012-02-06ASoC: wm8994: Enabling VMID should take a runtime PM referenceMark Brown
We can enable VMID independently of the bias in some use cases so we need to ensure that the core device is powered up. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
2012-02-01ASoC: wm_hubs: Correct line input to line output 2 pathsMark Brown
The second line output mixer has the controls for the line input bypasses in the opposite order. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
2012-02-01ASoC: cs42l73: Fix Output [X|A|V]SP_SCLK Sourcing Mode setting for master modeAxel Lin
For master mode, set Output [X|A|V]SP_SCLK Sourcing Mode to MCLK Mode. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Brian Austin <brian.austin@cirrus.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-01ASoC: wm8962: Fix word length configurationSusan Gao
Signed-off-by: Susan Gao <sgao@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
2012-01-31ASoC: core: Better support for idle_bias_off suspend ignoresMark Brown
If an idle_bias_off device is in any state other than off then it is still active for some reason (typically a low power function such as accessory detection). This wasn't an issue when the feature was implemented as we always went to _ON for any active function, subsequent power improvements have changed things. With the modern way of doing things we should overhaul the infrastructure to allow devices to explicitly take references for these functions but that's a much more invasive change and will require driver updates to deploy, this will bring the framework into line with the existing driver set before we do that work. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2012-01-31ASoC: wm8994: Remove ASoC level register cache syncMark Brown
Now we've switched over to regmap the ASoC level cache sync will be ineffectual and potentially harmful as there is no longer an ASoC level cache. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-31ASoC: wm_hubs: Fix routing of input PGAs to line output mixerMark Brown
IN1L/R is routed to both line output mixers, we don't route IN1 to LINEOUT1 and IN2 to LINEOUT2. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
2012-01-30ASoC: neo1973_wm8753: remove references to the neo1973-gta01 machineDenis 'GNUtoo' Carikli
The Openmoko GTA01 machine has been removed from the machine ID database, so we need to remove references to it as well. Without that fix we have: sound/soc/samsung/neo1973_wm8753.c: In function ‘neo1973_wm8753_init’: sound/soc/samsung/neo1973_wm8753.c:325:2: error: implicit declaration of function ‘machine_is_neo1973_gta01’ Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-27ASoC: wm_hubs: fix wrong bits for LINEOUT2 N/P mixerUK KIM
Signed-off-by: UK KIM <w0806.kim@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
2012-01-26ASoC: wm_hubs: Enable line out VMID buffer for single ended line outputsMark Brown
For optimal performance the single ended line outputs require that the line output VMID buffer be enabled. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
2012-01-25ASoC: wm5100: Mark register cache as dirty when regulators are disabledMark Brown
Otherwise we won't resync later. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-25ASoC: wm8962: Mark register cache as dirty when regulators are disabledMark Brown
Otherwise we won't resync later. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-25ASoC: wm8996: Mark register cache as dirty when regulators are disabledMark Brown
Otherwise we won't resync later. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-25ASoC: wm5100: Fix microphone configurationMark Brown
We need to write the configuration for each microphone to a different register. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
2012-01-25ASoC: wm5100: Make sure we switch to button reporting modeMark Brown
When we have identified an accessory make sure we've flagged that we've done so in order to make sure we always report buttons and don't continue to polarity flip. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-24ASoC: wm2000: Fix use-after-free - don't release_firmware() twice on errorJesper Juhl
In wm2000_i2c_probe(), if we take the true branch in " ret = snd_soc_register_codec(&i2c->dev, &soc_codec_dev_wm2000, NULL, 0); if (ret != 0) goto err_fw; " then we'll release_firmware(fw) at the 'err_fw' label. But we've already done that just a few lines above. That's a use-after-free bug. This patch restructures the code so that we always call release_firmware(fw) before leaving the function, but only ever call it once. This means that we have to initialize 'fw' to NULL since some paths may now end up calling it without having called request_firmware(), but since request_firmware() deals gracefully with NULL pointers, we are fine if we just NULL initialize it. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-23ASoC: wm8958: Use correct format string in dev_err() callJesper Juhl
To print a value of type size_t one should use %zd, not %d. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-22ASoC: wm8996: Call _POST_PMU callback for CPVDDMark Brown
We should be allowing a 5ms delay after the charge pump is started in order to ensure it has finished ramping. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2012-01-20ASoC: mxs: Fix mxs-saif timeoutFabio Estevam
On a mx28evk board the following errors happens on mxs-sgtl5000 probe: [ 0.660000] saif0_clk_set_rate: divider writing timeout [ 0.670000] mxs-sgtl5000: probe of mxs-sgtl5000.0 failed with error -110 [ 0.670000] ALSA device list: [ 0.680000] No soundcards found. This timeout happens because clk_set_rate will result in writing to the DIV bits of register HW_CLKCTRL_SAIF0 with the saif clock gated (CLKGATE bit set to one). MX28 Reference states the following about CLKGATE: "The DIV field can change ONLY when this clock gate bit field is low." So call clk_prepare_enable prior to clk_set_rate to fix this problem. After this change the mxs-saif driver can be correctly probed and audio is functional. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-20ASoC: Disable register synchronisation for low frequency WM8996 SYSCLKMark Brown
With a low frequency SYSCLK and a fast I2C clock register synchronisation may occasionally take too long to take effect, causing I/O issues. Disable synchronisation in order to avoid any issues. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2012-01-20ASoC: Don't go through cache when applying WM5100 rev A updatesMark Brown
These are all to either uncached registers or fixes to register defaults, in the former case the cache won't do anything and in the latter case we're fixing things so the cache sync will do the right thing. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2012-01-20ASoC: Mark WM5100 register map cache only when going into BIAS_OFFMark Brown
Writing to the registers won't work if we do actually manage to hit a fully powered off state. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2012-01-20ASoC: tlv320aic32x4: always enable analouge blockWolfram Sang
Register LDOCTLEN must always be initialized to clear the analog power control bit, otherwise the analog block will stay deactivated. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Javier Martin <javier.martin@vista-silicon.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-20ASoC: tlv320aic32x4: always enable dividersWolfram Sang
Dividers (such as MDAC) are always needed, independent of the codec being I2S master or slave. Needed on a custom board where the codec has to be slave. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Javier Martin <javier.martin@vista-silicon.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-20ASoC: sgtl5000: Fix wrong register name in restoreZeng Zhaoming
Correct SGTL5000_CHIP_CLK_CTRL to SGTL5000_CHIP_REF_CTRL in sgtl5000_restore_regs(), and add comment to explain the restore order. Reported-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Zeng Zhaoming <zengzm.kernel@gmail.com> Acked-by: Dong Aisheng <dong.aisheng@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-18Merge branch 'fix/asoc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound * 'fix/asoc' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ASoC: Wait for WM8993 FLL to stabilise ASoC: core - Free platform DAPM context at platform removal. ASoC: dapm - Fix check for codec context in dapm_power_widgets(). ASoC: sgtl5000: update author email address ASoC: Fix DMA channel leak in imx-pcm-dma-mx2 driver.
2012-01-18Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
* 'next' of git://git.infradead.org/users/vkoul/slave-dma: (53 commits) ARM: mach-shmobile: specify CHCLR registers on SH7372 dma: shdma: fix runtime PM: clear channel buffers on reset dma/imx-sdma: save irq flags when use spin_lock in sdma_tx_submit dmaengine/ste_dma40: clear LNK on channel startup dmaengine: intel_mid_dma: remove legacy pm interface ASoC: mxs: correct 'direction' of device_prep_dma_cyclic dmaengine: intel_mid_dma: error path fix dmaengine: intel_mid_dma: locking and freeing fixes mtd: gpmi-nand: move to dma_transfer_direction mtd: fix compile error for gpmi-nand mmc: mxs-mmc: fix the dma_transfer_direction migration dmaengine: add DMA_TRANS_NONE to dma_transfer_direction dma: mxs-dma: Don't use CLKGATE bits in CTRL0 to disable DMA channels dma: mxs-dma: make mxs_dma_prep_slave_sg() multi user safe dma: mxs-dma: Always leave mxs_dma_init() with the clock disabled. dma: mxs-dma: fix a typo in comment DMA: PL330: Remove pm_runtime_xxx calls from pl330 probe/remove video i.MX IPU: Fix display connections i.MX IPU DMA: Fix wrong burstsize settings dmaengine/ste_dma40: allow fixed physical channel ... Fix up conflicts in drivers/dma/{Kconfig,mxs-dma.c,pl330.c} The conflicts looked pretty trivial, but I'll ask people to verify them.
2012-01-17ASoC: Wait for WM8993 FLL to stabiliseMark Brown
Ensure the FLL is locked before we return from set_fll(). Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-16Merge branch 'fixes' of ↵Linus Torvalds
git://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-arm * 'fixes' of git://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-arm: ARM: sa11x0: assabet: fix build warning ARM: Add arm_memblock_steal() to allocate memory away from the kernel ARM: 7275/1: LPAE: Check the CPU support for the long descriptor format ARM: 7274/1: NUC900: Rename nuc900-audio platform device to nuc900-ac97 ARM: 7272/1: S3C24XX: Fix build error for missing <mach/system-reset.h> ARM: 7271/1: Fix typo in conversion of ARCH_NR_GPIOS to Kconfig
2012-01-16ASoC: core - Free platform DAPM context at platform removal.Liam Girdwood
Fix platform removal by freeing the platform DAPM resources and remove it from the DAPM list. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-16ASoC: dapm - Fix check for codec context in dapm_power_widgets().Liam Girdwood
Fixes a NULL pointer dereference in dapm_power_widgets() if the dapm context has no codec. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-16ASoC: sgtl5000: update author email addressZeng Zhaoming
Update MODULE_AUTHOR email address. Signed-off-by: Zeng Zhaoming <zengzm.kernel@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-14Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (119 commits) MIPS: Delete unused function add_temporary_entry. MIPS: Set default pci cache line size. MIPS: Flush huge TLB MIPS: Octeon: Remove SYS_SUPPORTS_HIGHMEM. MIPS: Octeon: Add support for OCTEON II PCIe MIPS: Octeon: Update PCI Latency timer and enable more error reporting. MIPS: Alchemy: Update cpu-feature-overrides MIPS: Alchemy: db1200: Improve PB1200 detection. MIPS: Alchemy: merge Au1000 and Au1300-style IRQ controller code. MIPS: Alchemy: chain IRQ controllers to MIPS IRQ controller MIPS: Alchemy: irq: register pm at irq init time MIPS: Alchemy: Touchscreen support on DB1100 MIPS: Alchemy: Hook up IrDA on DB1000/DB1100 net/irda: convert au1k_ir to platform driver. MIPS: Alchemy: remove unused board headers MTD: nand: make au1550nd.c a platform_driver MIPS: Netlogic: Mark Netlogic chips as SMT capable MIPS: Netlogic: Add support for XLP 3XX cores MIPS: Netlogic: Merge some of XLR/XLP wakup code MIPS: Netlogic: Add default XLP config. ... Fix up trivial conflicts in arch/mips/kernel/{perf_event_mipsxx.c, traps.c} and drivers/tty/serial/Makefile
2012-01-13Merge branch 'master' into fixesRussell King
2012-01-13ARM: 7274/1: NUC900: Rename nuc900-audio platform device to nuc900-ac97Axel Lin
This change ensures the platform device name matches nuc900-ac97 platform driver name. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Wan Zongshun <mcuos.com@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-12ASoC: Fix DMA channel leak in imx-pcm-dma-mx2 driver.Javier Martin
"snd_imx_pcm_hw_params" callback can be called several times by the user (i.e. OSS emulation) leading to a DMA channel leak. Signed-off-by: Javier Martin <javier.martin@vista-silicon.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-12Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (526 commits) ASoC: twl6040 - Add method to query optimum PDM_DL1 gain ALSA: hda - Fix the lost power-setup of seconary pins after PM resume ALSA: usb-audio: add Yamaha MOX6/MOX8 support ALSA: virtuoso: add S/PDIF input support for all Xonars ALSA: ice1724 - Support for ooAoo SQ210a ALSA: ice1724 - Allow card info based on model only ALSA: ice1724 - Create capture pcm only for ADC-enabled configurations ALSA: hdspm - Provide unique driver id based on card serial ASoC: Dynamically allocate the rtd device for a non-empty release() ASoC: Fix recursive dependency due to select ATMEL_SSC in SND_ATMEL_SOC_SSC ALSA: hda - Fix the detection of "Loopback Mixing" control for VIA codecs ALSA: hda - Return the error from get_wcaps_type() for invalid NIDs ALSA: hda - Use auto-parser for HP laptops with cx20459 codec ALSA: asihpi - Fix potential Oops in snd_asihpi_cmode_info() ALSA: hdsp - Fix potential Oops in snd_hdsp_info_pref_sync_ref() ALSA: hda/cirrus - support for iMac12,2 model ASoC: cx20442: add bias control over a platform provided regulator ALSA: usb-audio - Avoid flood of frame-active debug messages ALSA: snd-usb-us122l: Delete calls to preempt_disable mfd: Put WM8994 into cache only mode when suspending ... Fix up trivial conflicts in: - arch/arm/mach-s3c64xx/mach-crag6410.c: renamed speyside_wm8962 to tobermory, added littlemill right next to it - drivers/base/regmap/{regcache.c,regmap.c}: duplicate diff that had already come in with other changes in the regmap tree
2012-01-12Merge branch 'for-3.3' of ↵Takashi Iwai
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into topic/asoc
2012-01-11Merge branch 'for-3.3' of ↵Takashi Iwai
git://git.kernel.org/pub/scm/linux/kernel/git/lrg/asoc into topic/asoc
2012-01-11ASoC: twl6040 - Add method to query optimum PDM_DL1 gainLiam Girdwood
The DL1 PDM interface adds a little gain depending on the output device. Add a method to retrieve the gain value for machine driver usage. Signed-off-by: Liam Girdwood <lrg@ti.com>
2012-01-10ASoC: Dynamically allocate the rtd device for a non-empty release()Mark Brown
The device model needs a release() function so it can free devices when they become dereferenced. Do that for rtds. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-10ASoC: Fix recursive dependency due to select ATMEL_SSC in SND_ATMEL_SOC_SSCAxel Lin
commit 739be96 "ASoC: Fix build dependency for SND_ATMEL_SOC_SSC" introduces below build warnings: drivers/misc/Kconfig:212:error: recursive dependency detected! drivers/misc/Kconfig:212: symbol ATMEL_SSC is selected by SND_ATMEL_SOC_SSC sound/soc/atmel/Kconfig:9: symbol SND_ATMEL_SOC_SSC is selected by SND_AT91_SOC_SAM9G20_WM8731 sound/soc/atmel/Kconfig:18: symbol SND_AT91_SOC_SAM9G20_WM8731 depends on ATMEL_SSC SND_ATMEL_SOC_SSC needs ATMEL_SSC to pass compilation. This patch remove the "select ATMEL_SSC" from SND_ATMEL_SOC_SSC to avoid above warnings. And then ensures all the machine drivers that select SND_ATMEL_SOC_SSC need to depend on ATMEL_SSC. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>