summaryrefslogtreecommitdiff
path: root/sound
AgeCommit message (Collapse)Author
2011-10-05ASoC: Add verbose debugging showing why widgets get marked dirtyMark Brown
Help diagnose why we're checking widgets by providing some logging when we first dirty them. This should possibly be a trace point if it's useful but can be absurdly verbose if enabled, we can always change it later if desired. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-04ASoC: Reduce the number of neigbours we mark dirty when updating powerMark Brown
If two widgets are not currently connected then there is no need to propagate a power state change between them as we mark the affected widgets when we change a connection. Similarly if a neighbour widget is already in the state being set for the current widget then there is no need to recheck. On one system I tested this gave: Power Path Neighbour Before: 114 1066 1327 After: 106 970 1186 which is an improvement, although relatively small. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-04ASoC: Do DAPM power checks only for widgets changed since last runMark Brown
In order to reduce the number of DAPM power checks we run keep a list of widgets which have been changed since the last DAPM run and iterate over that rather than the full widget list. Whenever we change the power state for a widget we add all the source and sink widgets it has to the dirty list, ensuring that all widgets in the path are checked. This covers more widgets than we need to as some of the neighbour widgets won't be connected but it's simpler as a first step. On one system I tried this gave: Power Path Neighbour Before: 207 1939 2461 After: 114 1066 1327 which seems useful. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-04ASoC: Mark headphone, mic, speaker and line widgets as always connectedMark Brown
We're not actually doing any dynamic power management based on connection and output drivers (which are pretty much the same thing) are marked as unconditionally connected already. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-04ASoC: Factor out widget power check operationMark Brown
We've got the same code in two different places, let's have it in a single place instead. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-04ASoC: Ensure all DAPM widgets have a power check callbackMark Brown
Makes the code simpler. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-04ASoC: Move bias level decision into main dapm_power_widgets()Mark Brown
Future patches will try to reduce the number of widgets we check on each DAPM run but we're still going to need to look and see if the devices is on at all so we can manage the overall device bias. Move these checks out into the main dapm_power_widgets() function so we don't have to think about them for now. Once we're doing more incremental updates it'll probably be worth using refcounts for each bias level to avoid having to do the sweep over all widgets but that's not going to be where the big performance wins are. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-04ASoC: Factor write of widget power out into a separate functionMark Brown
Split the decision about what the new power should be out from the implementation of that decision. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-04ASoC: Remove direct register cache accesses from WM8962 driverMark Brown
Also fix return values for speaker switch updates. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-10-04ASoC: twl6040: Simplify custom put_volsw callbackPeter Ujfalusi
Return -EINVAL in the unlikely event, if the function has been called for unhandled control. This way we can remove one check in the code. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-04ASoC: Remove unneeded hw_write initialisation in wm8523Axel Lin
It is not required after commit 8d50e447 "ASoC: Factor out I/O for Wolfson 8 bit data 16 bit register CODECs" Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-04ASoC: Remove unneeded hw_write initialisation in ak4671Axel Lin
It is not required now. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-04ASoC: wm8711: Use snd_soc_update_bits for read-modify-writeAxel Lin
Use snd_soc_update_bits for read-modify-write register access instead of open-coding it using snd_soc_read and snd_soc_write Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-04ASoC: wm8988: Use snd_soc_update_bits for read-modify-writeAxel Lin
Use snd_soc_update_bits for read-modify-write register access instead of open-coding it using snd_soc_read and snd_soc_write Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-04ASoC: wm8750: Use snd_soc_update_bits for read-modify-writeAxel Lin
Use snd_soc_update_bits for read-modify-write register access instead of open-coding it using snd_soc_read and snd_soc_write Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-04ASoC: Avoid writing to WM8971_RESET in wm8971_resumeAxel Lin
Writing to WM8971_RESET resets all registers to the default state. Thus we should avoid writing to WM8971_RESET on resume. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-04Merge branch 'for-3.1' into for-3.2Mark Brown
2011-10-04ASoC: wm8994: Fix setting rate_reg for wm8994-aif2Axel Lin
For wm8994-aif2, the rate_reg should be WM8994_AIF2_RATE. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-10-04ASoC: wm8995: Slightly optimize configure_clockAxel Lin
snd_soc_update_bits() will only write new register value if the old value is different from the new value. In additional, snd_soc_update_bits() returns 0 for no change. No need to read WM8995_CLOCKING_1 register before calling snd_soc_update_bits(). Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-04ASoC: wm8994: Slightly optimize configure_clockAxel Lin
snd_soc_update_bits() will only write new register value if the old value is different from the new value. In additional, snd_soc_update_bits() returns 0 for no change. No need to read WM8994_CLOCKING_1 register before calling snd_soc_update_bits(). Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-04ASoC: omap-pcm: Fix the no period wakeup implementationPeter Ujfalusi
After omap_request_dma the BLOCK_IRQ is enabled as default configuration for the channel. If we are requested for no period wakeup, we need to disable the BLOCK_IRQ in order to not receive any interrupts. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-04ASoC: wm8988: Use snd_soc_update_bits for read-modify-writeAxel Lin
Use snd_soc_update_bits for read-modify-write register access instead of open-coding it using snd_soc_read and snd_soc_write Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-04ASoC: wm8971: Use snd_soc_update_bits for read-modify-writeAxel Lin
Use snd_soc_update_bits for read-modify-write register access instead of open-coding it using snd_soc_read and snd_soc_write Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-04ASoC: wm8711: Use snd_soc_update_bits for read-modify-writeAxel Lin
Use snd_soc_update_bits for read-modify-write register access instead of open-coding it using snd_soc_read and snd_soc_write Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-04ASoC: max98095 codec: Catch driver bugs for biquad channel nameRyan Mallon
Move the biquad channel names to a separate array and iterate over it in max98095_get_bq_channel rather than duplicating the hardcoded channel names. Add an error message if an invalid channel is passed and check the error in the callers. Also added a BUILD_BUG_ON to ensure that the bq_mode_name and controls arrays are the same size. Signed-off-by: Ryan Mallon <rmallon@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-04ASoC: max98088 codec: Catch driver bugs for eq channel nameRyan Mallon
Move the EQ channel names to a separate array and iterate over it in max98088_get_channel rather than duplicating the hardcoded channel names. Add an error message if an invalid channel is passed and check the error in the callers. Also added a BUILD_BUG_ON to ensure that the eq_mode_name and controls arrays are the same size. Signed-off-by: Ryan Mallon <rmallon@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-04ASoC: Add WM1811 supportMark Brown
The WM1811 is mostly register compatible with the WM8994 and WM8958, providing a high performance audio hub CODEC in a small form factor suitable for ultra compact system designs. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-03ASoC: Fix typo in 24.576MHz rate in WM5100Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-03ASoC: Instantiate DAPM widgets before we do the DAI link initMark Brown
The DAI init function may want to do something that needs the widgets to be instantiated. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-03ASoC: samsung: s3c-i2s-v2.c needs module.hAxel Lin
Include <linux/module.h> to fix below build error: CC sound/soc/samsung/s3c-i2s-v2.o sound/soc/samsung/s3c-i2s-v2.c:573: warning: data definition has no type or storage class sound/soc/samsung/s3c-i2s-v2.c:573: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL' sound/soc/samsung/s3c-i2s-v2.c:573: warning: parameter names (without types) in function declaration sound/soc/samsung/s3c-i2s-v2.c:638: warning: data definition has no type or storage class sound/soc/samsung/s3c-i2s-v2.c:638: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL' sound/soc/samsung/s3c-i2s-v2.c:638: warning: parameter names (without types) in function declaration sound/soc/samsung/s3c-i2s-v2.c:677: warning: data definition has no type or storage class sound/soc/samsung/s3c-i2s-v2.c:677: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL' sound/soc/samsung/s3c-i2s-v2.c:677: warning: parameter names (without types) in function declaration sound/soc/samsung/s3c-i2s-v2.c: In function 's3c_i2sv2_register_dai': sound/soc/samsung/s3c-i2s-v2.c:736: warning: initialization discards qualifiers from pointer target type sound/soc/samsung/s3c-i2s-v2.c: At top level: sound/soc/samsung/s3c-i2s-v2.c:754: warning: data definition has no type or storage class sound/soc/samsung/s3c-i2s-v2.c:754: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL' sound/soc/samsung/s3c-i2s-v2.c:754: warning: parameter names (without types) in function declaration sound/soc/samsung/s3c-i2s-v2.c:756: error: expected declaration specifiers or '...' before string constant sound/soc/samsung/s3c-i2s-v2.c:756: warning: data definition has no type or storage class sound/soc/samsung/s3c-i2s-v2.c:756: warning: type defaults to 'int' in declaration of 'MODULE_LICENSE' sound/soc/samsung/s3c-i2s-v2.c:756: warning: function declaration isn't a prototype make[3]: *** [sound/soc/samsung/s3c-i2s-v2.o] Error 1 make[2]: *** [sound/soc/samsung] Error 2 make[1]: *** [sound/soc] Error 2 make: *** [sound] Error 2 Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-03ASoC: samsung: WM8994 depends on MFD_WM8994Arnd Bergmann
Any driver that selects SND_SOC_WM8994 should also make sure that MFD_WM8994 is set, since the codec relies on the mfd code: sound/built-in.o: In function `wm8994_read': last.c:(.text+0x20160): undefined reference to `wm8994_reg_read' sound/built-in.o: In function `wm8994_write': last.c:(.text+0x20e68): undefined reference to `wm8994_reg_write' This solves the problem by selecting the MFD driver directly and adding extra 'depends on' statements to make sure that we respect the dependencies of that driver. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-03ASoC: Fix setting update bits for WM8741_DACRMSB_ATTENUATIONAxel Lin
After checking the code and datasheet, I think what we want in the second snd_soc_update_bits call is to update WM8741_DACRMSB_ATTENUATION register instead of WM8741_DACRLSB_ATTENUATION. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-03ASoC: txx9: Add __exit_p at necessary placeAxel Lin
We have __exit annotation for txx9aclc_generic_remove(), thus add __devexit_p to wrap it. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-03ASoC: Staticise ep93xx_ac97_daiAxel Lin
Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Mika Westerberg <mika.westerberg@iki.fi> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-03ASoC: Staticise simtec_audio_resume()Axel Lin
It is exported via resume callback of struct dev_pm_ops rather than referenced directly and so should be staticised. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-03ASoC: Remove needless codec->dapm.bias_level assignment to SND_SOC_BIAS_OFFAxel Lin
This assignment is done by the snd_soc_register_codec so there is no need to redo it in probe function of a codec driver. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-02ASoC: sh: use correct __iomem annotationsArnd Bergmann
This removes a few unnecessary type casts and avoids sparse warnings. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-02ASoC: imx: eukrea_tlv320 needs i2cArnd Bergmann
Add a missing dependency that is required for random configurations. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-02ASoC: omap_mcpdm_remove cannot be __devexitArnd Bergmann
omap_mcpdm_remove is used from asoc_mcpdm_probe, which is an initcall, and must not be discarded when HOTPLUG is disabled. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-02ASoC: Remove unused srate variable in tegra_spdif_hw_paramsAxel Lin
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-02ASoC: Remove unused rate variable in magician_playback_hw_paramsAxel Lin
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-02ASoC: Staticise sh4_ssi_daiAxel Lin
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-02ASoC: Staticise samsung_spdif_daiAxel Lin
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-02ASoC: tegra: Staticise tegra_i2s_dai and tegra_spdif_daiAxel Lin
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-02ASoC: samsung: Add __devexit_p at necessary placesAxel Lin
According to the comments in include/linux/init.h: "Pointers to __devexit functions must use __devexit_p(function_name), the wrapper will insert either the function_name or NULL, depending on the confi options." Signed-off-by: Axel Lin <axel.lin@gmail.com> Cc: Jaswinder Singh <jassi.brar@samsung.com> Cc: Ben Dooks <ben@simtec.co.uk> Cc: Seungwhan Youn <sw.youn@samsung.com> Cc: Jassi Brar <jassisinghbrar@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-02ASoC: kirkwood-i2s: Add __devexit_p at necessary placeAxel Lin
According to the comments in include/linux/init.h: "Pointers to __devexit functions must use __devexit_p(function_name), the wrapper will insert either the function_name or NULL, depending on the config options." We have __devexit annotation for kirkwood_i2s_dev_remove(), thus add __devexit_p at necessary place. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-02ASoC: wm8782: Add __devexit_p at necessary placeAxel Lin
According to the comments in include/linux/init.h: "Pointers to __devexit functions must use __devexit_p(function_name), the wrapper will insert either the function_name or NULL, depending on the config options." We have __devexit annotation for wm8782_remove(), thus add __devexit_p at necessary place. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-02Merge branch 'for-3.1' into for-3.2Mark Brown
2011-10-02ASoC: omap: Use single hw_params callback in sdp3430 and zoom2Jarkko Nikula
There is no need to use two hw_params callbacks in sdp3430 and zoom2 as thet are now identical. Use instead the same snd_soc_ops structure and hw_params callback for both DAI links. Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-02ASoC: omap: Convert bunch of machine drivers to use init time DAI formatJarkko Nikula
Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
generated by cgit v0.10.2 at 2024-11-10 13:02:11 (GMT)