summaryrefslogtreecommitdiff
path: root/tools/net
AgeCommit message (Collapse)Author
2014-05-16tools: bpf_jit_disasm: increase image buffer sizeAlexei Starovoitov
JITed seccomp filters can be quite large if they check a lot of syscalls Simply increase buffer size Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Acked-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16tools: bpf_jit_disasm: ignore image address for disasmAlexei Starovoitov
seccomp filters use kernel JIT image addresses, so bpf_jit_enable=2 prints [ 20.146438] flen=3 proglen=82 pass=0 image=0000000000000000 [ 20.146442] JIT code: 00000000: 55 48 89 e5 48 81 ec 28 02 00 00 ... ignore image address, so that seccomp filters can be disassembled Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Acked-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/ethernet/altera/altera_sgdma.c net/netlink/af_netlink.c net/sched/cls_api.c net/sched/sch_api.c The netlink conflict dealt with moving to netlink_capable() and netlink_ns_capable() in the 'net' tree vs. supporting 'tc' operations in non-init namespaces. These were simple transformations from netlink_capable to netlink_ns_capable. The Altera driver conflict was simply code removal overlapping some void pointer cast cleanups in net-next. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-30bpf_dbg: fix wrong register usageBrendan Hickey
The AND instruction is erroneously using the X register instead of the K register. Signed-off-by: Brendan Hickey <bhickey@google.com> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-23filter: added BPF random opcodeChema Gonzalez
Added a new ancillary load (bpf call in eBPF parlance) that produces a 32-bit random number. We are implementing it as an ancillary load (instead of an ISA opcode) because (a) it is simpler, (b) allows easy JITing, and (c) seems more in line with generic ISAs that do not have "get a random number" as a instruction, but as an OS call. The main use for this ancillary load is to perform random packet sampling. Signed-off-by: Chema Gonzalez <chema@google.com> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Acked-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/usb/r8152.c drivers/net/xen-netback/netback.c Both the r8152 and netback conflicts were simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-12tools/net/Makefile: Define PACKAGE to fix build problemsMarkos Chandras
Fixes the following build problem with binutils-2.24 gcc -Wall -O2 -c -o bpf_jit_disasm.o bpf_jit_disasm.c In file included from bpf_jit_disasm.c:25:0: /usr/include/bfd.h:35:2: error: #error config.h must be included before this header #error config.h must be included before this header This is similar to commit 3ce711a6abc27abce1554e1d671a8762b7187690 "perf tools: bfd.h/libbfd detection fails with recent binutils" See: https://sourceware.org/bugzilla/show_bug.cgi?id=14243 CC: David S. Miller <davem@davemloft.net> CC: Daniel Borkmann <dborkman@redhat.com> CC: netdev@vger.kernel.org Acked-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-25tools: bpf_dbg: various misc code cleanupsDaniel Borkmann
Lets clean up bpf_dbg a bit and improve its code slightly in various areas: i) Get rid of some macros as there's no good reason for keeping them, ii) remove one unused variable and reduce scope of various variables found by cppcheck, iii) Close non-default file descriptors when exiting the shell. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-17bpf_exp: free duplicated labels at exit timeDaniel Borkmann
Valgrind found that extracted labels that are passed from the lexer weren't freed upon exit. Therefore, add a small helper function that walks label tables and frees them. Since also NULL can be passed to free(3), we do not need to take care of that here. While at it, fix up a spacing error in bpf_set_curr_label(). Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-17bpf_dbg: always close socket in bpf_runnableDaniel Borkmann
We must not leave the socket intact in bpf_runnable(). The socket is used to test if the filter code is being accepted by the kernel or not. So right after we do the setsockopt(2), we need to close it again. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-12filter: bpf_asm: add minimal bpf asm toolDaniel Borkmann
There are a couple of valid use cases for a minimal low-level bpf asm like tool, for example, using/linking to libpcap is not an option, the required BPF filters use Linux extensions that are not supported by libpcap's compiler, a filter might be more complex and not cleanly implementable with libpcap's compiler, particular filter codes should be optimized differently than libpcap's internal BPF compiler does, or for security audits of emitted BPF JIT code for prepared set of BPF instructions resp. BPF JIT compiler development in general. Then, in such cases writing such a filter in low-level syntax can be an good alternative, for example, xt_bpf and cls_bpf users might have requirements that could result in more complex filter code, or one that cannot be expressed with libpcap (e.g. different return codes in cls_bpf for flowids on various BPF code paths). Moreover, BPF JIT implementors may wish to manually write test cases in order to verify the resulting JIT image, and thus need low-level access to BPF code generation as well. Therefore, complete the available toolchain for BPF with this small bpf_asm helper tool for the tools/net/ directory. These 3 complementary minimal helper tools round up and facilitate BPF development. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-12filter: bpf_dbg: add minimal bpf debuggerDaniel Borkmann
This patch adds a minimal BPF debugger that "emulates" the kernel's BPF engine (w/o extensions) and allows for single stepping (forwards and backwards through BPF code) or running with >=1 breakpoints through selected or all packets from a pcap file with a provided user filter in order to facilitate verification of a BPF program. When a breakpoint is being hit, it dumps all register contents, decoded instructions and in case of branches both decoded branch targets as well as other useful information. Having this facility is in particular useful to verify BPF programs against given test traffic *before* attaching to a live system. With the general availability of cls_bpf, xt_bpf, socket filters, team driver and e.g. PTP code, all BPF users, quite often a single more complex BPF program is being used. Reasons for a more complex BPF program are primarily to optimize execution time for making a verdict when multiple simple BPF programs are combined into one in order to prevent parsing same headers multiple times. In particular, for cls_bpf that can have various return paths for encoding flowids, and xt_bpf to come to a fw verdict this can be the case. Therefore, as this can result in more complex and harder to debug code, it would be very useful to have this minimal tool for testing purposes. It can also be of help for BPF JIT developers as filters are "test attached" to the kernel on a temporary socket thus triggering a JIT image dump when enabled. The tool uses an interactive libreadline shell with auto-completion and history support. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-21filter: add minimal BPF JIT image disassemblerDaniel Borkmann
This is a minimal stand-alone user space helper, that allows for debugging or verification of emitted BPF JIT images. This is in particular useful for emitted opcode debugging, since minor bugs in the JIT compiler can be fatal. The disassembler is architecture generic and uses libopcodes and libbfd. How to get to the disassembly, example: 1) `echo 2 > /proc/sys/net/core/bpf_jit_enable` 2) Load a BPF filter (e.g. `tcpdump -p -n -s 0 -i eth1 host 192.168.20.0/24`) 3) Run e.g. `bpf_jit_disasm -o` to disassemble the most recent JIT code output `bpf_jit_disasm -o` will display the related opcodes to a particular instruction as well. Example for x86_64: $ ./bpf_jit_disasm 94 bytes emitted from JIT compiler (pass:3, flen:9) ffffffffa0356000 + <x>: 0: push %rbp 1: mov %rsp,%rbp 4: sub $0x60,%rsp 8: mov %rbx,-0x8(%rbp) c: mov 0x68(%rdi),%r9d 10: sub 0x6c(%rdi),%r9d 14: mov 0xe0(%rdi),%r8 1b: mov $0xc,%esi 20: callq 0xffffffffe0d01b71 25: cmp $0x86dd,%eax 2a: jne 0x000000000000003d 2c: mov $0x14,%esi 31: callq 0xffffffffe0d01b8d 36: cmp $0x6,%eax [...] 5c: leaveq 5d: retq $ ./bpf_jit_disasm -o 94 bytes emitted from JIT compiler (pass:3, flen:9) ffffffffa0356000 + <x>: 0: push %rbp 55 1: mov %rsp,%rbp 48 89 e5 4: sub $0x60,%rsp 48 83 ec 60 8: mov %rbx,-0x8(%rbp) 48 89 5d f8 c: mov 0x68(%rdi),%r9d 44 8b 4f 68 10: sub 0x6c(%rdi),%r9d 44 2b 4f 6c [...] 5c: leaveq c9 5d: retq c3 Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>