summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/net/dsa/dsa.txt
blob: 9bbbe7f87d678b10ebdb354718ac7bb56db53407 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
Distributed Switch Architecture Device Tree Bindings
----------------------------------------------------

Two bindings exist, one of which has been deprecated due to
limitations.

Current Binding
---------------

Switches are true Linux devices and can be probes by any means. Once
probed, they register to the DSA framework, passing a node
pointer. This node is expected to fulfil the following binding, and
may contain additional properties as required by the device it is
embedded within.

Required properties:

- ports		: A container for child nodes representing switch ports.

Optional properties:

- dsa,member	: A two element list indicates which DSA cluster, and position
		  within the cluster a switch takes. <0 0> is cluster 0,
		  switch 0. <0 1> is cluster 0, switch 1. <1 0> is cluster 1,
		  switch 0. A switch not part of any cluster (single device
		  hanging off a CPU port) must not specify this property

The ports container has the following properties

Required properties:

- #address-cells	: Must be 1
- #size-cells		: Must be 0

Each port children node must have the following mandatory properties:
- reg			: Describes the port address in the switch
- label			: Describes the label associated with this port, which
                          will become the netdev name. Special labels are
			  "cpu" to indicate a CPU port and "dsa" to
			  indicate an uplink/downlink port between switches in
			  the cluster.

A port labelled "dsa" has the following mandatory property:

- link			: Should be a list of phandles to other switch's DSA
			  port. This port is used as the outgoing port
			  towards the phandle ports. The full routing
			  information must be given, not just the one hop
			  routes to neighbouring switches.

A port labelled "cpu" has the following mandatory property:

- ethernet		: Should be a phandle to a valid Ethernet device node.
                          This host device is what the switch port is
			  connected to.

Port child nodes may also contain the following optional standardised
properties, described in binding documents:

- phy-handle		: Phandle to a PHY on an MDIO bus. See
			  Documentation/devicetree/bindings/net/ethernet.txt
			  for details.

- phy-mode		: See
			  Documentation/devicetree/bindings/net/ethernet.txt
			  for details.

- fixed-link		: Fixed-link subnode describing a link to a non-MDIO
			  managed entity. See
			  Documentation/devicetree/bindings/net/fixed-link.txt
			  for details.

Example

The following example shows three switches on three MDIO busses,
linked into one DSA cluster.

&mdio1 {
	#address-cells = <1>;
	#size-cells = <0>;

	switch0: switch0@0 {
		compatible = "marvell,mv88e6085";
		#address-cells = <1>;
		#size-cells = <0>;
		reg = <0>;

		dsa,member = <0 0>;

		ports {
			#address-cells = <1>;
			#size-cells = <0>;
			port@0 {
				reg = <0>;
				label = "lan0";
			};

			port@1 {
				reg = <1>;
				label = "lan1";
			};

			port@2 {
				reg = <2>;
				label = "lan2";
			};

			switch0port5: port@5 {
				reg = <5>;
				label = "dsa";
				phy-mode = "rgmii-txid";
				link = <&switch1port6
					&switch2port9>;
				fixed-link {
					speed = <1000>;
					full-duplex;
				};
			};

			port@6 {
				reg = <6>;
				label = "cpu";
				ethernet = <&fec1>;
				fixed-link {
					speed = <100>;
					full-duplex;
				};
			};
		};
	};
};

&mdio2 {
	#address-cells = <1>;
	#size-cells = <0>;

	switch1: switch1@0 {
		compatible = "marvell,mv88e6085";
		#address-cells = <1>;
		#size-cells = <0>;
		reg = <0>;

		dsa,member = <0 1>;

		ports {
			#address-cells = <1>;
			#size-cells = <0>;
			port@0 {
				reg = <0>;
				label = "lan3";
				phy-handle = <&switch1phy0>;
			};

			port@1 {
				reg = <1>;
				label = "lan4";
				phy-handle = <&switch1phy1>;
			};

			port@2 {
				reg = <2>;
				label = "lan5";
				phy-handle = <&switch1phy2>;
			};

			switch1port5: port@5 {
				reg = <5>;
				label = "dsa";
				link = <&switch2port9>;
				phy-mode = "rgmii-txid";
				fixed-link {
					speed = <1000>;
					full-duplex;
				};
			};

			switch1port6: port@6 {
				reg = <6>;
				label = "dsa";
				phy-mode = "rgmii-txid";
				link = <&switch0port5>;
				fixed-link {
					speed = <1000>;
					full-duplex;
				};
			};
		};
		mdio-bus {
			#address-cells = <1>;
			#size-cells = <0>;
			switch1phy0: switch1phy0@0 {
				reg = <0>;
			};
			switch1phy1: switch1phy0@1 {
				reg = <1>;
			};
			switch1phy2: switch1phy0@2 {
				reg = <2>;
			};
		};
	 };
};

&mdio4 {
	#address-cells = <1>;
	#size-cells = <0>;

	switch2: switch2@0 {
		compatible = "marvell,mv88e6085";
		#address-cells = <1>;
		#size-cells = <0>;
		reg = <0>;

		dsa,member = <0 2>;

		ports {
			#address-cells = <1>;
			#size-cells = <0>;
			port@0 {
				reg = <0>;
				label = "lan6";
			};

			port@1 {
				reg = <1>;
				label = "lan7";
			};

			port@2 {
				reg = <2>;
				label = "lan8";
			};

			port@3 {
				reg = <3>;
				label = "optical3";
				fixed-link {
					speed = <1000>;
					full-duplex;
					link-gpios = <&gpio6 2
					      GPIO_ACTIVE_HIGH>;
				};
			};

			port@4 {
				reg = <4>;
				label = "optical4";
				fixed-link {
					speed = <1000>;
					full-duplex;
					link-gpios = <&gpio6 3
					      GPIO_ACTIVE_HIGH>;
				};
			};

			switch2port9: port@9 {
				reg = <9>;
				label = "dsa";
				phy-mode = "rgmii-txid";
				link = <&switch1port5
					&switch0port5>;
				fixed-link {
					speed = <1000>;
					full-duplex;
				};
			};
		};
	};
};

Deprecated Binding
------------------

The deprecated binding makes use of a platform device to represent the
switches. The switches themselves are not Linux devices, and make use
of an MDIO bus for management.

Required properties:
- compatible		: Should be "marvell,dsa"
- #address-cells	: Must be 2, first cell is the address on the MDIO bus
			  and second cell is the address in the switch tree.
			  Second cell is used only when cascading/chaining.
- #size-cells		: Must be 0
- dsa,ethernet		: Should be a phandle to a valid Ethernet device node
- dsa,mii-bus		: Should be a phandle to a valid MDIO bus device node

Optional properties:
- interrupts		: property with a value describing the switch
			  interrupt number (not supported by the driver)

A DSA node can contain multiple switch chips which are therefore child nodes of
the parent DSA node. The maximum number of allowed child nodes is 4
(DSA_MAX_SWITCHES).
Each of these switch child nodes should have the following required properties:

- reg			: Contains two fields. The first one describes the
			  address on the MII bus. The second is the switch
			  number that must be unique in cascaded configurations
- #address-cells	: Must be 1
- #size-cells		: Must be 0

A switch child node has the following optional property:

- eeprom-length		: Set to the length of an EEPROM connected to the
			  switch. Must be set if the switch can not detect
			  the presence and/or size of a connected EEPROM,
			  otherwise optional.

A switch may have multiple "port" children nodes

Each port children node must have the following mandatory properties:
- reg			: Describes the port address in the switch
- label			: Describes the label associated with this port, special
			  labels are "cpu" to indicate a CPU port and "dsa" to
			  indicate an uplink/downlink port.

Note that a port labelled "dsa" will imply checking for the uplink phandle
described below.

Optionnal property:
- link			: Should be a list of phandles to another switch's DSA port.
			  This property is only used when switches are being
			  chained/cascaded together. This port is used as outgoing port
			  towards the phandle port, which can be more than one hop away.

- phy-handle		: Phandle to a PHY on an external MDIO bus, not the
			  switch internal one. See
			  Documentation/devicetree/bindings/net/ethernet.txt
			  for details.

- phy-mode		: String representing the connection to the designated
			  PHY node specified by the 'phy-handle' property. See
			  Documentation/devicetree/bindings/net/ethernet.txt
			  for details.

- mii-bus		: Should be a phandle to a valid MDIO bus device node.
			  This mii-bus will be used in preference to the
			  global dsa,mii-bus defined above, for this switch.

Optional subnodes:
- fixed-link		: Fixed-link subnode describing a link to a non-MDIO
			  managed entity. See
			  Documentation/devicetree/bindings/net/fixed-link.txt
			  for details.

Example:

	dsa@0 {
		compatible = "marvell,dsa";
		#address-cells = <2>;
		#size-cells = <0>;

		interrupts = <10>;
		dsa,ethernet = <&ethernet0>;
		dsa,mii-bus = <&mii_bus0>;

		switch@0 {
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <16 0>;	/* MDIO address 16, switch 0 in tree */

			port@0 {
				reg = <0>;
				label = "lan1";
				phy-handle = <&phy0>;
			};

			port@1 {
				reg = <1>;
				label = "lan2";
			};

			port@5 {
				reg = <5>;
				label = "cpu";
			};

			switch0port6: port@6 {
				reg = <6>;
				label = "dsa";
				link = <&switch1port0
				        &switch2port0>;
			};
		};

		switch@1 {
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <17 1>;	/* MDIO address 17, switch 1 in tree */
			mii-bus = <&mii_bus1>;
			reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;

			switch1port0: port@0 {
				reg = <0>;
				label = "dsa";
				link = <&switch0port6>;
			};
			switch1port1: port@1 {
				reg = <1>;
				label = "dsa";
				link = <&switch2port1>;
			};
		};

		switch@2 {
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <18 2>;	/* MDIO address 18, switch 2 in tree */
			mii-bus = <&mii_bus1>;

			switch2port0: port@0 {
				reg = <0>;
				label = "dsa";
				link = <&switch1port1
				        &switch0port6>;
			};
		};
	};