1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
|
/*
* Device Tree file for Marvell RD-AXPWiFiAP.
*
* Note: this board is shipped with a new generation boot loader that
* remaps internal registers at 0xf1000000. Therefore, if earlyprintk
* is used, the CONFIG_DEBUG_MVEBU_UART_ALTERNATE option should be
* used.
*
* Copyright (C) 2013 Marvell
*
* Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "armada-xp-mv78230.dtsi"
/ {
model = "Marvell RD-AXPWiFiAP";
compatible = "marvell,rd-axpwifiap", "marvell,armadaxp-mv78230", "marvell,armadaxp", "marvell,armada-370-xp";
chosen {
bootargs = "console=ttyS0,115200 earlyprintk";
};
memory {
device_type = "memory";
reg = <0x00000000 0x00000000 0x00000000 0x40000000>; /* 1GB */
};
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>;
pcie-controller {
status = "okay";
/* First mini-PCIe port */
pcie@1,0 {
/* Port 0, Lane 0 */
status = "okay";
};
/* Second mini-PCIe port */
pcie@2,0 {
/* Port 0, Lane 1 */
status = "okay";
};
/* Renesas uPD720202 USB 3.0 controller */
pcie@3,0 {
/* Port 0, Lane 3 */
status = "okay";
};
};
internal-regs {
pinctrl: pin-ctrl@18000 {
pinctrl-0 = <&pmx_phy_int>;
pinctrl-names = "default";
pmx_ge0: pmx-ge0 {
marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3",
"mpp4", "mpp5", "mpp6", "mpp7",
"mpp8", "mpp9", "mpp10", "mpp11";
marvell,function = "ge0";
};
pmx_ge1: pmx-ge1 {
marvell,pins = "mpp12", "mpp13", "mpp14", "mpp15",
"mpp16", "mpp17", "mpp18", "mpp19",
"mpp20", "mpp21", "mpp22", "mpp23";
marvell,function = "ge1";
};
pmx_keys: pmx-keys {
marvell,pins = "mpp33";
marvell,function = "gpio";
};
pmx_spi: pmx-spi {
marvell,pins = "mpp36", "mpp37", "mpp38", "mpp39";
marvell,function = "spi";
};
pmx_phy_int: pmx-phy-int {
marvell,pins = "mpp32";
marvell,function = "gpio";
};
};
serial@12000 {
status = "okay";
};
serial@12100 {
status = "okay";
};
sata@a0000 {
nr-ports = <1>;
status = "okay";
};
mdio {
phy0: ethernet-phy@0 {
reg = <0>;
};
phy1: ethernet-phy@1 {
reg = <1>;
};
};
ethernet@70000 {
pinctrl-0 = <&pmx_ge0>;
pinctrl-names = "default";
status = "okay";
phy = <&phy0>;
phy-mode = "rgmii-id";
};
ethernet@74000 {
pinctrl-0 = <&pmx_ge1>;
pinctrl-names = "default";
status = "okay";
phy = <&phy1>;
phy-mode = "rgmii-id";
};
spi0: spi@10600 {
status = "okay";
pinctrl-0 = <&pmx_spi>;
pinctrl-names = "default";
spi-flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "n25q128a13";
reg = <0>; /* Chip select 0 */
spi-max-frequency = <108000000>;
};
};
};
};
gpio_keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
pinctrl-0 = <&pmx_keys>;
pinctrl-names = "default";
button@1 {
label = "Factory Reset Button";
linux,code = <KEY_SETUP>;
gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
};
};
};
|