1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
|
/*
* arch/mips/vr41xx/nec-cmbvr4133/m1535plus.c
*
* Initialize for ALi M1535+(included M5229 and M5237).
*
* Author: Yoichi Yuasa <yyuasa@mvista.com, or source@mvista.com> and
* Alex Sapkov <asapkov@ru.mvista.com>
*
* 2003-2004 (c) MontaVista, Software, Inc. This file is licensed under
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*
* Support for NEC-CMBVR4133 in 2.6
* Author: Manish Lachwani (mlachwani@mvista.com)
*/
#include <linux/init.h>
#include <linux/types.h>
#include <linux/serial.h>
#include <asm/vr41xx/cmbvr4133.h>
#include <linux/pci.h>
#include <asm/io.h>
#define CONFIG_PORT(port) ((port) ? 0x3f0 : 0x370)
#define DATA_PORT(port) ((port) ? 0x3f1 : 0x371)
#define INDEX_PORT(port) CONFIG_PORT(port)
#define ENTER_CONFIG_MODE(port) \
do { \
outb_p(0x51, CONFIG_PORT(port)); \
outb_p(0x23, CONFIG_PORT(port)); \
} while(0)
#define SELECT_LOGICAL_DEVICE(port, dev_no) \
do { \
outb_p(0x07, INDEX_PORT(port)); \
outb_p((dev_no), DATA_PORT(port)); \
} while(0)
#define WRITE_CONFIG_DATA(port, index, data) \
do { \
outb_p((index), INDEX_PORT(port)); \
outb_p((data), DATA_PORT(port)); \
} while(0)
#define EXIT_CONFIG_MODE(port) outb(0xbb, CONFIG_PORT(port))
#define PCI_CONFIG_ADDR KSEG1ADDR(0x0f000c18)
#define PCI_CONFIG_DATA KSEG1ADDR(0x0f000c14)
#ifdef CONFIG_BLK_DEV_FD
void __devinit ali_m1535plus_fdc_init(int port)
{
ENTER_CONFIG_MODE(port);
SELECT_LOGICAL_DEVICE(port, 0); /* FDC */
WRITE_CONFIG_DATA(port, 0x30, 0x01); /* FDC: enable */
WRITE_CONFIG_DATA(port, 0x60, 0x03); /* I/O port base: 0x3f0 */
WRITE_CONFIG_DATA(port, 0x61, 0xf0);
WRITE_CONFIG_DATA(port, 0x70, 0x06); /* IRQ: 6 */
WRITE_CONFIG_DATA(port, 0x74, 0x02); /* DMA: channel 2 */
WRITE_CONFIG_DATA(port, 0xf0, 0x08);
WRITE_CONFIG_DATA(port, 0xf1, 0x00);
WRITE_CONFIG_DATA(port, 0xf2, 0xff);
WRITE_CONFIG_DATA(port, 0xf4, 0x00);
EXIT_CONFIG_MODE(port);
}
#endif
void __devinit ali_m1535plus_parport_init(int port)
{
ENTER_CONFIG_MODE(port);
SELECT_LOGICAL_DEVICE(port, 3); /* Parallel Port */
WRITE_CONFIG_DATA(port, 0x30, 0x01);
WRITE_CONFIG_DATA(port, 0x60, 0x03); /* I/O port base: 0x378 */
WRITE_CONFIG_DATA(port, 0x61, 0x78);
WRITE_CONFIG_DATA(port, 0x70, 0x07); /* IRQ: 7 */
WRITE_CONFIG_DATA(port, 0x74, 0x04); /* DMA: None */
WRITE_CONFIG_DATA(port, 0xf0, 0x8c); /* IRQ polarity: Active Low */
WRITE_CONFIG_DATA(port, 0xf1, 0xc5);
EXIT_CONFIG_MODE(port);
}
void __devinit ali_m1535plus_keyboard_init(int port)
{
ENTER_CONFIG_MODE(port);
SELECT_LOGICAL_DEVICE(port, 7); /* KEYBOARD */
WRITE_CONFIG_DATA(port, 0x30, 0x01); /* KEYBOARD: eable */
WRITE_CONFIG_DATA(port, 0x70, 0x01); /* IRQ: 1 */
WRITE_CONFIG_DATA(port, 0x72, 0x0c); /* PS/2 Mouse IRQ: 12 */
WRITE_CONFIG_DATA(port, 0xf0, 0x00);
EXIT_CONFIG_MODE(port);
}
void __devinit ali_m1535plus_hotkey_init(int port)
{
ENTER_CONFIG_MODE(port);
SELECT_LOGICAL_DEVICE(port, 0xc); /* HOTKEY */
WRITE_CONFIG_DATA(port, 0x30, 0x00);
WRITE_CONFIG_DATA(port, 0xf0, 0x35);
WRITE_CONFIG_DATA(port, 0xf1, 0x14);
WRITE_CONFIG_DATA(port, 0xf2, 0x11);
WRITE_CONFIG_DATA(port, 0xf3, 0x71);
WRITE_CONFIG_DATA(port, 0xf5, 0x05);
EXIT_CONFIG_MODE(port);
}
void ali_m1535plus_init(struct pci_dev *dev)
{
pci_write_config_byte(dev, 0x40, 0x18); /* PCI Interface Control */
pci_write_config_byte(dev, 0x41, 0xc0); /* PS2 keyb & mouse enable */
pci_write_config_byte(dev, 0x42, 0x41); /* ISA bus cycle control */
pci_write_config_byte(dev, 0x43, 0x00); /* ISA bus cycle control 2 */
pci_write_config_byte(dev, 0x44, 0x5d); /* IDE enable & IRQ 14 */
pci_write_config_byte(dev, 0x45, 0x0b); /* PCI int polling mode */
pci_write_config_byte(dev, 0x47, 0x00); /* BIOS chip select control */
/* IRQ routing */
pci_write_config_byte(dev, 0x48, 0x03); /* INTA IRQ10, INTB disable */
pci_write_config_byte(dev, 0x49, 0x00); /* INTC and INTD disable */
pci_write_config_byte(dev, 0x4a, 0x00); /* INTE and INTF disable */
pci_write_config_byte(dev, 0x4b, 0x90); /* Audio IRQ11, Modem disable */
pci_write_config_word(dev, 0x50, 0x4000); /* Parity check IDE enable */
pci_write_config_word(dev, 0x52, 0x0000); /* USB & RTC disable */
pci_write_config_word(dev, 0x54, 0x0002); /* ??? no info */
pci_write_config_word(dev, 0x56, 0x0002); /* PCS1J signal disable */
pci_write_config_byte(dev, 0x59, 0x00); /* PCSDS */
pci_write_config_byte(dev, 0x5a, 0x00);
pci_write_config_byte(dev, 0x5b, 0x00);
pci_write_config_word(dev, 0x5c, 0x0000);
pci_write_config_byte(dev, 0x5e, 0x00);
pci_write_config_byte(dev, 0x5f, 0x00);
pci_write_config_word(dev, 0x60, 0x0000);
pci_write_config_byte(dev, 0x6c, 0x00);
pci_write_config_byte(dev, 0x6d, 0x48); /* ROM address mapping */
pci_write_config_byte(dev, 0x6e, 0x00); /* ??? what for? */
pci_write_config_byte(dev, 0x70, 0x12); /* Serial IRQ control */
pci_write_config_byte(dev, 0x71, 0xEF); /* DMA channel select */
pci_write_config_byte(dev, 0x72, 0x03); /* USB IDSEL */
pci_write_config_byte(dev, 0x73, 0x00); /* ??? no info */
/*
* IRQ setup ALi M5237 USB Host Controller
* IRQ: 9
*/
pci_write_config_byte(dev, 0x74, 0x01); /* USB IRQ9 */
pci_write_config_byte(dev, 0x75, 0x1f); /* IDE2 IRQ 15 */
pci_write_config_byte(dev, 0x76, 0x80); /* ACPI disable */
pci_write_config_byte(dev, 0x77, 0x40); /* Modem disable */
pci_write_config_dword(dev, 0x78, 0x20000000); /* Pin select 2 */
pci_write_config_byte(dev, 0x7c, 0x00); /* Pin select 3 */
pci_write_config_byte(dev, 0x81, 0x00); /* ID read/write control */
pci_write_config_byte(dev, 0x90, 0x00); /* PCI PM block control */
pci_write_config_word(dev, 0xa4, 0x0000); /* PMSCR */
#ifdef CONFIG_BLK_DEV_FD
ali_m1535plus_fdc_init(1);
#endif
ali_m1535plus_keyboard_init(1);
ali_m1535plus_hotkey_init(1);
}
static inline void ali_config_writeb(u8 reg, u8 val, int devfn)
{
u32 data;
int shift;
writel((1 << 16) | (devfn << 8) | (reg & 0xfc) | 1UL, PCI_CONFIG_ADDR);
data = readl(PCI_CONFIG_DATA);
shift = (reg & 3) << 3;
data &= ~(0xff << shift);
data |= (((u32)val) << shift);
writel(data, PCI_CONFIG_DATA);
}
static inline u8 ali_config_readb(u8 reg, int devfn)
{
u32 data;
writel((1 << 16) | (devfn << 8) | (reg & 0xfc) | 1UL, PCI_CONFIG_ADDR);
data = readl(PCI_CONFIG_DATA);
return (u8)(data >> ((reg & 3) << 3));
}
static inline u16 ali_config_readw(u8 reg, int devfn)
{
u32 data;
writel((1 << 16) | (devfn << 8) | (reg & 0xfc) | 1UL, PCI_CONFIG_ADDR);
data = readl(PCI_CONFIG_DATA);
return (u16)(data >> ((reg & 2) << 3));
}
int vr4133_rockhopper = 0;
void __init ali_m5229_preinit(void)
{
if (ali_config_readw(PCI_VENDOR_ID, 16) == PCI_VENDOR_ID_AL &&
ali_config_readw(PCI_DEVICE_ID, 16) == PCI_DEVICE_ID_AL_M1533) {
printk(KERN_INFO "Found an NEC Rockhopper \n");
vr4133_rockhopper = 1;
/*
* Enable ALi M5229 IDE Controller (both channels)
* IDSEL: A27
*/
ali_config_writeb(0x58, 0x4c, 16);
}
}
void __init ali_m5229_init(struct pci_dev *dev)
{
/*
* Enable Primary/Secondary Channel Cable Detect 40-Pin
*/
pci_write_config_word(dev, 0x4a, 0xc023);
/*
* Set only the 3rd byteis for the master IDE's cycle and
* enable Internal IDE Function
*/
pci_write_config_byte(dev, 0x50, 0x23); /* Class code attr register */
pci_write_config_byte(dev, 0x09, 0xff); /* Set native mode & stuff */
pci_write_config_byte(dev, 0x52, 0x00); /* use timing registers */
pci_write_config_byte(dev, 0x58, 0x02); /* Primary addr setup timing */
pci_write_config_byte(dev, 0x59, 0x22); /* Primary cmd block timing */
pci_write_config_byte(dev, 0x5a, 0x22); /* Pr drv 0 R/W timing */
pci_write_config_byte(dev, 0x5b, 0x22); /* Pr drv 1 R/W timing */
pci_write_config_byte(dev, 0x5c, 0x02); /* Sec addr setup timing */
pci_write_config_byte(dev, 0x5d, 0x22); /* Sec cmd block timing */
pci_write_config_byte(dev, 0x5e, 0x22); /* Sec drv 0 R/W timing */
pci_write_config_byte(dev, 0x5f, 0x22); /* Sec drv 1 R/W timing */
pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x20);
pci_write_config_word(dev, PCI_COMMAND,
PCI_COMMAND_PARITY | PCI_COMMAND_MASTER |
PCI_COMMAND_IO);
}
|
