Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx

14 files changed, 82 insertions, 39 deletions

diff --git a/arch/powerpc/config.mk b/arch/powerpc/config.mk
index 6329b6c..fec02f2 100644
--- a/arch/powerpc/config.mk
+++ b/arch/powerpc/config.mk
@@ -11,6 +11,7 @@ endif
 
 CONFIG_STANDALONE_LOAD_ADDR ?= 0x40000
 LDFLAGS_FINAL += --gc-sections
+LDFLAGS_FINAL += --bss-plt
 PLATFORM_RELFLAGS += -fpic -mrelocatable -ffunction-sections -fdata-sections \
 								-meabi
 PLATFORM_CPPFLAGS += -D__powerpc__ -ffixed-r2
diff --git a/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c b/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c
index d1fc76a..8edf5bb 100644
--- a/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c
+++ b/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c
@@ -186,11 +186,6 @@ u64 serdes_init(u32 sd, u32 sd_addr, u32 sd_prctl_mask, u32 sd_prctl_shift)
 #endif
 
 	cfg = in_be32(&gur->rcwsr[4]) & sd_prctl_mask;
-	/* Is serdes enabled at all? */
-	if (!cfg) {
-		printf("SERDES%d is not enabled\n", sd + 1);
-		return 0;
-	}
 
 /* Erratum A-007186
  * Freescale Scratch Pad Fuse Register n (SFP_FSPFR0)
diff --git a/arch/powerpc/cpu/mpc8xxx/fdt.c b/arch/powerpc/cpu/mpc8xxx/fdt.c
index 9273745..4cec5e1 100644
--- a/arch/powerpc/cpu/mpc8xxx/fdt.c
+++ b/arch/powerpc/cpu/mpc8xxx/fdt.c
@@ -1,5 +1,5 @@
 /*
- * Copyright 2009-2012 Freescale Semiconductor, Inc.
+ * Copyright 2009-2014 Freescale Semiconductor, Inc.
  *
  * This file is derived from arch/powerpc/cpu/mpc85xx/cpu.c and
  * arch/powerpc/cpu/mpc86xx/cpu.c. Basically this file contains
@@ -123,14 +123,14 @@ void fdt_fixup_dr_usb(void *blob, bd_t *bd)
 {
 	const char *modes[] = { "host", "peripheral", "otg" };
 	const char *phys[] = { "ulpi", "utmi" };
-	const char *dr_mode_type = NULL;
-	const char *dr_phy_type = NULL;
 	int usb_mode_off = -1;
 	int usb_phy_off = -1;
 	char str[5];
 	int i, j;
 
 	for (i = 1; i <= CONFIG_USB_MAX_CONTROLLER_COUNT; i++) {
+		const char *dr_mode_type = NULL;
+		const char *dr_phy_type = NULL;
 		int mode_idx = -1, phy_idx = -1;
 		snprintf(str, 5, "%s%d", "usb", i);
 		if (hwconfig(str)) {
@@ -150,18 +150,16 @@ void fdt_fixup_dr_usb(void *blob, bd_t *bd)
 				}
 			}
 
-			if (mode_idx < 0 || phy_idx < 0) {
-				puts("ERROR: wrong usb mode/phy defined!!\n");
-				return;
-			}
-
-			dr_mode_type = modes[mode_idx];
-			dr_phy_type = phys[phy_idx];
-
 			if (mode_idx < 0 && phy_idx < 0) {
 				printf("WARNING: invalid phy or mode\n");
 				return;
 			}
+
+			if (mode_idx > -1)
+				dr_mode_type = modes[mode_idx];
+
+			if (phy_idx > -1)
+				dr_phy_type = phys[phy_idx];
 		}
 
 		usb_mode_off = fdt_fixup_usb_mode_phy_type(blob,
diff --git a/board/freescale/t1040qds/eth.c b/board/freescale/t1040qds/eth.c
index 1929bba..06d9086 100644
--- a/board/freescale/t1040qds/eth.c
+++ b/board/freescale/t1040qds/eth.c
@@ -241,6 +241,8 @@ static void initialize_lane_to_slot(void)
 		break;
 	case 0xA7:
 		lane_to_slot[1] = 7;
+		lane_to_slot[2] = 6;
+		lane_to_slot[3] = 5;
 		lane_to_slot[7] = 7;
 		break;
 	case 0xAA:
@@ -410,6 +412,8 @@ void t1040_handle_phy_interface_sgmii(int i)
 			fm_info_set_phy_address(i, riser_phy_addr[1]);
 		if (FM1_DTSEC3 == i)
 			fm_info_set_phy_address(i, riser_phy_addr[2]);
+		if (FM1_DTSEC5 == i)
+			fm_info_set_phy_address(i, riser_phy_addr[3]);
 
 		mdio_mux[i] = EMI1_SLOT7;
 		fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i]));
diff --git a/board/freescale/t104xrdb/MAINTAINERS b/board/freescale/t104xrdb/MAINTAINERS
index a4775c0..b61e1c0 100644
--- a/board/freescale/t104xrdb/MAINTAINERS
+++ b/board/freescale/t104xrdb/MAINTAINERS
@@ -6,6 +6,7 @@ F:	include/configs/T104xRDB.h
 F:	configs/T1040RDB_defconfig
 F:	configs/T1040RDB_NAND_defconfig
 F:	configs/T1040RDB_SPIFLASH_defconfig
+F:	configs/T1042RDB_defconfig
 F:	configs/T1042RDB_PI_defconfig
 F:	configs/T1042RDB_PI_NAND_defconfig
 F:	configs/T1042RDB_PI_SPIFLASH_defconfig
diff --git a/board/freescale/t104xrdb/README b/board/freescale/t104xrdb/README
index cdbe1fa..ac95b5e 100644
--- a/board/freescale/t104xrdb/README
+++ b/board/freescale/t104xrdb/README
@@ -4,10 +4,23 @@ The T1040RDB is a Freescale reference board that hosts the T1040 SoC
 (and variants). Variants inclued T1042 presonality of T1040, in which
 case T1040RDB can also be called T1042RDB.
 
+The T1042RDB is a Freescale reference board that hosts the T1042 SoC
+(and variants). The board is similar to T1040RDB, T1040 is a reduced
+personality of T1040 SoC without Integrated 8-port Gigabit(L2 Switch).
+
 The T1042RDB_PI is a Freescale reference board that hosts the T1042 SoC.
 (a personality of T1040 SoC). The board is similar to T1040RDB but is
 designed specially with low power features targeted for Printing Image Market.
 
+Basic difference's among T1040RDB, T1042RDB_PI, T1042RDB
+-------------------------------------------------------------------------
+Board		Si		Protocol		Targeted Market
+-------------------------------------------------------------------------
+T1040RDB	T1040		0x66                    Networking
+T1040RDB	T1042		0x86                    Networking
+T1042RDB_PI	T1042		0x06                    Printing & Imaging
+
+
 T1040 SoC Overview
 ------------------
 The QorIQ T1040/T1042 processor support four integrated 64-bit e5500 PA
@@ -194,10 +207,10 @@ The below commands apply to the board
    Commands for switching to alternate bank.
 
 	1. To change from vbank0 to vbank4
-		=> qixis_reset altbank (it will boot using vbank4)
+		=> cpld reset altbank (it will boot using vbank4)
 
 	2.To change from vbank4 to vbank0
-		=> qixis reset (it will boot using vbank0)
+		=> cpld reset (it will boot using vbank0)
 
 NAND boot with 2 Stage boot loader
 ----------------------------------
@@ -259,15 +272,15 @@ Switch Settings: (ON is 0, OFF is 1)
 ===============
 NAND boot SW setting:
 SW1: 10001000
-SW2: 00111001
+SW2: 00111011
 SW3: 11110001
 
 SPI boot SW setting:
 SW1: 00100010
-SW2: 10111001
+SW2: 10111011
 SW3: 11100001
 
 SD boot SW setting:
 SW1: 00100000
-SW2: 00111001
+SW2: 00111011
 SW3: 11100001
diff --git a/board/freescale/t104xrdb/ddr.c b/board/freescale/t104xrdb/ddr.c
index 34c9224..2c331ee 100644
--- a/board/freescale/t104xrdb/ddr.c
+++ b/board/freescale/t104xrdb/ddr.c
@@ -105,8 +105,8 @@ found:
 	popts->zq_en = 1;
 
 	/* DHC_EN =1, ODT = 75 Ohm */
-	popts->ddr_cdr1 = DDR_CDR1_DHC_EN | DDR_CDR1_ODT(DDR_CDR_ODT_OFF);
-	popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_OFF);
+	popts->ddr_cdr1 = DDR_CDR1_DHC_EN | DDR_CDR1_ODT(DDR_CDR_ODT_75ohm);
+	popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_75ohm);
 }
 
 phys_size_t initdram(int board_type)
diff --git a/board/freescale/t104xrdb/eth.c b/board/freescale/t104xrdb/eth.c
index 63e5f90..c8b6c67 100644
--- a/board/freescale/t104xrdb/eth.c
+++ b/board/freescale/t104xrdb/eth.c
@@ -43,6 +43,16 @@ int board_eth_init(bd_t *bis)
 						CONFIG_SYS_SGMII1_PHY_ADDR);
 			break;
 #endif
+#ifdef CONFIG_T1042RDB
+		case PHY_INTERFACE_MODE_SGMII:
+			/* T1042RDB doesn't supports SGMII on DTSEC1 & DTSEC2 */
+			if ((FM1_DTSEC1 == i) || (FM1_DTSEC2 == i))
+				fm_info_set_phy_address(i, 0);
+			/* T1042RDB only supports SGMII on DTSEC3 */
+			fm_info_set_phy_address(FM1_DTSEC3,
+						CONFIG_SYS_SGMII1_PHY_ADDR);
+			break;
+#endif
 		case PHY_INTERFACE_MODE_RGMII:
 			if (FM1_DTSEC4 == i)
 				phy_addr = CONFIG_SYS_RGMII1_PHY_ADDR;
diff --git a/board/freescale/t104xrdb/t1042_pi_rcw.cfg b/board/freescale/t104xrdb/t1042_pi_rcw.cfg
new file mode 100644
index 0000000..57de89a
--- /dev/null
+++ b/board/freescale/t104xrdb/t1042_pi_rcw.cfg
@@ -0,0 +1,7 @@
+#PBL preamble and RCW header
+aa55aa55 010e0100
+# serdes protocol 0x06
+0c18000e 0e000000 00000000 00000000
+06000002 00400002 e8106000 01000000
+00000000 00000000 00000000 00030810
+00000000 01fe0a06 00000000 00000000
diff --git a/board/freescale/t104xrdb/t1042_rcw.cfg b/board/freescale/t104xrdb/t1042_rcw.cfg
index a3ea8ad..db4d52f 100644
--- a/board/freescale/t104xrdb/t1042_rcw.cfg
+++ b/board/freescale/t104xrdb/t1042_rcw.cfg
@@ -1,7 +1,7 @@
 #PBL preamble and RCW header
 aa55aa55 010e0100
-# serdes protocol 0x66
+# serdes protocol 0x86
 0c18000e 0e000000 00000000 00000000
-06000002 00400002 e8106000 01000000
-00000000 00000000 00000000 00030810
-00000000 01fe0a06 00000000 00000000
+86000002 80000002 ec027000 01000000
+00000000 00000000 00000000 00032810
+00000000 0342500f 00000000 00000000
diff --git a/configs/T1042RDB_defconfig b/configs/T1042RDB_defconfig
new file mode 100644
index 0000000..85eceb9
--- /dev/null
+++ b/configs/T1042RDB_defconfig
@@ -0,0 +1,4 @@
+CONFIG_SYS_EXTRA_OPTIONS="PPC_T1042,T1042RDB"
+CONFIG_PPC=y
+CONFIG_MPC85xx=y
+CONFIG_TARGET_T104XRDB=y
diff --git a/drivers/net/fm/t1040.c b/drivers/net/fm/t1040.c
index bcc871d..4cce46d 100644
--- a/drivers/net/fm/t1040.c
+++ b/drivers/net/fm/t1040.c
@@ -49,8 +49,6 @@ phy_interface_t fman_port_enet_if(enum fm_port port)
 		else if ((rcwsr13 & FSL_CORENET_RCWSR13_EC2) ==
 				FSL_CORENET_RCWSR13_EC2_FM1_DTSEC5_MII)
 			return PHY_INTERFACE_MODE_MII;
-		else
-			return PHY_INTERFACE_MODE_NONE;
 	}
 
 	switch (port) {
diff --git a/include/configs/B4860QDS.h b/include/configs/B4860QDS.h
index 953d06b..9063c57 100644
--- a/include/configs/B4860QDS.h
+++ b/include/configs/B4860QDS.h
@@ -227,6 +227,7 @@ unsigned long get_board_ddr_clk(void);
 #endif
 
 /* EEPROM */
+#define CONFIG_ID_EEPROM
 #define CONFIG_SYS_I2C_EEPROM_NXID
 #define CONFIG_SYS_EEPROM_BUS_NUM	0
 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x57
@@ -819,9 +820,16 @@ unsigned long get_board_ddr_clk(void);
 
 #define __USB_PHY_TYPE	ulpi
 
+#ifdef CONFIG_PPC_B4860
+#define HWCONFIG	"hwconfig=fsl_ddr:ctlr_intlv=null,"	\
+			"bank_intlv=cs0_cs1;"	\
+			"en_cpc:cpc2;"
+#else
+#define	HWCONFIG	"hwconfig=fsl_ddr:ctlr_intlv=null,bank_intlv=cs0_cs1;"
+#endif
+
 #define	CONFIG_EXTRA_ENV_SETTINGS				\
-	"hwconfig=fsl_ddr:ctlr_intlv=null,"		\
-	"bank_intlv=cs0_cs1;"					\
+	HWCONFIG						\
 	"usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 	"netdev=eth0\0"						\
 	"uboot=" __stringify(CONFIG_UBOOTPATH) "\0"			\
diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h
index d4c6f58..5e2c100 100644
--- a/include/configs/T104xRDB.h
+++ b/include/configs/T104xRDB.h
@@ -19,6 +19,9 @@
 #define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t104xrdb/t1040_rcw.cfg
 #endif
 #ifdef CONFIG_T1042RDB_PI
+#define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t104xrdb/t1042_pi_rcw.cfg
+#endif
+#ifdef CONFIG_T1042RDB
 #define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t104xrdb/t1042_rcw.cfg
 #endif
 
@@ -477,7 +480,7 @@
 
 /* I2C bus multiplexer */
 #define I2C_MUX_PCA_ADDR                0x70
-#ifdef CONFIG_T1040RDB
+#if defined(CONFIG_T1040RDB) || defined(CONFIG_T1042RDB)
 #define I2C_MUX_CH_DEFAULT      0x8
 #endif
 
@@ -634,7 +637,7 @@
 #define CONFIG_SYS_DPAA_FMAN
 #define CONFIG_SYS_DPAA_PME
 
-#ifdef CONFIG_T1040RDB
+#if defined(CONFIG_T1040RDB) || defined(CONFIG_T1042RDB)
 #define CONFIG_QE
 #define CONFIG_U_QE
 #endif
@@ -663,7 +666,7 @@
 #define CONFIG_SYS_FMAN_FW_ADDR		0xEFF00000
 #endif
 
-#ifdef CONFIG_T1040RDB
+#if defined(CONFIG_T1040RDB) || defined(CONFIG_T1042RDB)
 #if defined(CONFIG_SPIFLASH)
 #define CONFIG_SYS_QE_FW_ADDR		0x130000
 #elif defined(CONFIG_SDCARD)
@@ -687,7 +690,7 @@
 #endif
 
 #ifdef CONFIG_FMAN_ENET
-#ifdef CONFIG_T1040RDB
+#if defined(CONFIG_T1040RDB) || defined(CONFIG_T1042RDB)
 #define CONFIG_SYS_SGMII1_PHY_ADDR		0x03
 #endif
 #define CONFIG_SYS_RGMII1_PHY_ADDR		0x01
@@ -789,13 +792,14 @@
 #define CONFIG_BAUDRATE	115200
 
 #define __USB_PHY_TYPE	utmi
+#define RAMDISKFILE	"t104xrdb/ramdisk.uboot"
 
 #ifdef CONFIG_T1040RDB
 #define FDTFILE		"t1040rdb/t1040rdb.dtb"
-#define RAMDISKFILE	"t1040rdb/ramdisk.uboot"
-#elif CONFIG_T1042RDB_PI
-#define FDTFILE		"t1040rdb_pi/t1040rdb_pi.dtb"
-#define RAMDISKFILE	"t1040rdb_pi/ramdisk.uboot"
+#elif defined(CONFIG_T1042RDB_PI)
+#define FDTFILE		"t1042rdb_pi/t1042rdb_pi.dtb"
+#elif defined(CONFIG_T1042RDB)
+#define FDTFILE		"t1042rdb/t1042rdb.dtb"
 #endif
 
 #ifdef CONFIG_FSL_DIU_FB