diff options
author | Benoît Thébaudeau <benoit.thebaudeau@advansee.com> | 2013-05-03 10:32:18 (GMT) |
---|---|---|
committer | Stefano Babic <sbabic@denx.de> | 2013-05-05 15:55:03 (GMT) |
commit | 9e933b43f3e056e66ba4dfa219711da085e0fc40 (patch) | |
tree | 619c068f02d28147ad2d67e1dda33bf86d7c13df | |
parent | b597ff6be972cd5809789727167200f4876d00fd (diff) | |
download | u-boot-9e933b43f3e056e66ba4dfa219711da085e0fc40.tar.xz |
imx: mx25: Remove legacy iomux support
Legacy iomux support is no longer needed now that all boards have been converted
to iomux-v3.
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
-rw-r--r-- | arch/arm/cpu/arm926ejs/mx25/generic.c | 117 | ||||
-rw-r--r-- | arch/arm/include/asm/arch-mx25/imx25-pinmux.h | 421 | ||||
-rw-r--r-- | arch/arm/include/asm/arch-mx25/sys_proto.h | 32 |
3 files changed, 0 insertions, 570 deletions
diff --git a/arch/arm/cpu/arm926ejs/mx25/generic.c b/arch/arm/cpu/arm926ejs/mx25/generic.c index 679273b..7cbbe65 100644 --- a/arch/arm/cpu/arm926ejs/mx25/generic.c +++ b/arch/arm/cpu/arm926ejs/mx25/generic.c @@ -27,7 +27,6 @@ #include <netdev.h> #include <asm/io.h> #include <asm/arch/imx-regs.h> -#include <asm/arch/imx25-pinmux.h> #include <asm/arch/clock.h> #ifdef CONFIG_FSL_ESDHC @@ -248,123 +247,7 @@ int cpu_mmc_init(bd_t *bis) } #endif -#ifdef CONFIG_MXC_UART -void mx25_uart1_init_pins(void) -{ - struct iomuxc_mux_ctl *muxctl; - struct iomuxc_pad_ctl *padctl; - u32 inpadctl; - u32 outpadctl; - u32 muxmode0; - - muxctl = (struct iomuxc_mux_ctl *)IMX_IOPADMUX_BASE; - padctl = (struct iomuxc_pad_ctl *)IMX_IOPADCTL_BASE; - muxmode0 = MX25_PIN_MUX_MODE(0); - /* - * set up input pins with hysteresis and 100K pull-ups - */ - inpadctl = MX25_PIN_PAD_CTL_HYS - | MX25_PIN_PAD_CTL_PKE - | MX25_PIN_PAD_CTL_PUE | MX25_PIN_PAD_CTL_100K_PU; - - /* - * set up output pins with 100K pull-downs - * FIXME: need to revisit this - * PUE is ignored if PKE is not set - * so the right value here is likely - * 0x0 for no pull up/down - * or - * 0xc0 for 100k pull down - */ - outpadctl = MX25_PIN_PAD_CTL_PUE | MX25_PIN_PAD_CTL_100K_PD; - - /* UART1 */ - /* rxd */ - writel(muxmode0, &muxctl->pad_uart1_rxd); - writel(inpadctl, &padctl->pad_uart1_rxd); - - /* txd */ - writel(muxmode0, &muxctl->pad_uart1_txd); - writel(outpadctl, &padctl->pad_uart1_txd); - - /* rts */ - writel(muxmode0, &muxctl->pad_uart1_rts); - writel(outpadctl, &padctl->pad_uart1_rts); - - /* cts */ - writel(muxmode0, &muxctl->pad_uart1_cts); - writel(inpadctl, &padctl->pad_uart1_cts); -} -#endif /* CONFIG_MXC_UART */ - #ifdef CONFIG_FEC_MXC -void mx25_fec_init_pins(void) -{ - struct iomuxc_mux_ctl *muxctl; - struct iomuxc_pad_ctl *padctl; - u32 inpadctl_100kpd; - u32 inpadctl_22kpu; - u32 outpadctl; - u32 muxmode0; - - muxctl = (struct iomuxc_mux_ctl *)IMX_IOPADMUX_BASE; - padctl = (struct iomuxc_pad_ctl *)IMX_IOPADCTL_BASE; - muxmode0 = MX25_PIN_MUX_MODE(0); - inpadctl_100kpd = MX25_PIN_PAD_CTL_HYS - | MX25_PIN_PAD_CTL_PKE - | MX25_PIN_PAD_CTL_PUE | MX25_PIN_PAD_CTL_100K_PD; - inpadctl_22kpu = MX25_PIN_PAD_CTL_HYS - | MX25_PIN_PAD_CTL_PKE - | MX25_PIN_PAD_CTL_PUE | MX25_PIN_PAD_CTL_22K_PU; - /* - * set up output pins with 100K pull-downs - * FIXME: need to revisit this - * PUE is ignored if PKE is not set - * so the right value here is likely - * 0x0 for no pull - * or - * 0xc0 for 100k pull down - */ - outpadctl = MX25_PIN_PAD_CTL_PUE | MX25_PIN_PAD_CTL_100K_PD; - - /* FEC_TX_CLK */ - writel(muxmode0, &muxctl->pad_fec_tx_clk); - writel(inpadctl_100kpd, &padctl->pad_fec_tx_clk); - - /* FEC_RX_DV */ - writel(muxmode0, &muxctl->pad_fec_rx_dv); - writel(inpadctl_100kpd, &padctl->pad_fec_rx_dv); - - /* FEC_RDATA0 */ - writel(muxmode0, &muxctl->pad_fec_rdata0); - writel(inpadctl_100kpd, &padctl->pad_fec_rdata0); - - /* FEC_TDATA0 */ - writel(muxmode0, &muxctl->pad_fec_tdata0); - writel(outpadctl, &padctl->pad_fec_tdata0); - - /* FEC_TX_EN */ - writel(muxmode0, &muxctl->pad_fec_tx_en); - writel(outpadctl, &padctl->pad_fec_tx_en); - - /* FEC_MDC */ - writel(muxmode0, &muxctl->pad_fec_mdc); - writel(outpadctl, &padctl->pad_fec_mdc); - - /* FEC_MDIO */ - writel(muxmode0, &muxctl->pad_fec_mdio); - writel(inpadctl_22kpu, &padctl->pad_fec_mdio); - - /* FEC_RDATA1 */ - writel(muxmode0, &muxctl->pad_fec_rdata1); - writel(inpadctl_100kpd, &padctl->pad_fec_rdata1); - - /* FEC_TDATA1 */ - writel(muxmode0, &muxctl->pad_fec_tdata1); - writel(outpadctl, &padctl->pad_fec_tdata1); - -} - void imx_get_mac_from_fuse(int dev_id, unsigned char *mac) { int i; diff --git a/arch/arm/include/asm/arch-mx25/imx25-pinmux.h b/arch/arm/include/asm/arch-mx25/imx25-pinmux.h deleted file mode 100644 index a4c658b..0000000 --- a/arch/arm/include/asm/arch-mx25/imx25-pinmux.h +++ /dev/null @@ -1,421 +0,0 @@ -/* - * iopin settings are controlled by four different sets of registers - * iopad mux control - * individual iopad setup (voltage select, pull/keep, drive strength ...) - * group iopad setup (same as above but for groups of signals) - * input select when multiple inputs are possible - */ - -/* - * software pad mux control - */ -/* SW Input On (Loopback) */ -#define MX25_PIN_MUX_SION (1 << 4) -/* MUX Mode (0-7) */ -#define MX25_PIN_MUX_MODE(mode) ((mode & 0x7) << 0) -struct iomuxc_mux_ctl { - u32 gpr1; - u32 observe_int_mux; - u32 pad_a10; - u32 pad_a13; - u32 pad_a14; - u32 pad_a15; - u32 pad_a16; - u32 pad_a17; - u32 pad_a18; - u32 pad_a19; - u32 pad_a20; - u32 pad_a21; - u32 pad_a22; - u32 pad_a23; - u32 pad_a24; - u32 pad_a25; - u32 pad_eb0; - u32 pad_eb1; - u32 pad_oe; - u32 pad_cs0; - u32 pad_cs1; - u32 pad_cs4; - u32 pad_cs5; - u32 pad_nf_ce0; - u32 pad_ecb; - u32 pad_lba; - u32 pad_bclk; - u32 pad_rw; - u32 pad_nfwe_b; - u32 pad_nfre_b; - u32 pad_nfale; - u32 pad_nfcle; - u32 pad_nfwp_b; - u32 pad_nfrb; - u32 pad_d15; - u32 pad_d14; - u32 pad_d13; - u32 pad_d12; - u32 pad_d11; - u32 pad_d10; - u32 pad_d9; - u32 pad_d8; - u32 pad_d7; - u32 pad_d6; - u32 pad_d5; - u32 pad_d4; - u32 pad_d3; - u32 pad_d2; - u32 pad_d1; - u32 pad_d0; - u32 pad_ld0; - u32 pad_ld1; - u32 pad_ld2; - u32 pad_ld3; - u32 pad_ld4; - u32 pad_ld5; - u32 pad_ld6; - u32 pad_ld7; - u32 pad_ld8; - u32 pad_ld9; - u32 pad_ld10; - u32 pad_ld11; - u32 pad_ld12; - u32 pad_ld13; - u32 pad_ld14; - u32 pad_ld15; - u32 pad_hsync; - u32 pad_vsync; - u32 pad_lsclk; - u32 pad_oe_acd; - u32 pad_contrast; - u32 pad_pwm; - u32 pad_csi_d2; - u32 pad_csi_d3; - u32 pad_csi_d4; - u32 pad_csi_d5; - u32 pad_csi_d6; - u32 pad_csi_d7; - u32 pad_csi_d8; - u32 pad_csi_d9; - u32 pad_csi_mclk; - u32 pad_csi_vsync; - u32 pad_csi_hsync; - u32 pad_csi_pixclk; - u32 pad_i2c1_clk; - u32 pad_i2c1_dat; - u32 pad_cspi1_mosi; - u32 pad_cspi1_miso; - u32 pad_cspi1_ss0; - u32 pad_cspi1_ss1; - u32 pad_cspi1_sclk; - u32 pad_cspi1_rdy; - u32 pad_uart1_rxd; - u32 pad_uart1_txd; - u32 pad_uart1_rts; - u32 pad_uart1_cts; - u32 pad_uart2_rxd; - u32 pad_uart2_txd; - u32 pad_uart2_rts; - u32 pad_uart2_cts; - u32 pad_sd1_cmd; - u32 pad_sd1_clk; - u32 pad_sd1_data0; - u32 pad_sd1_data1; - u32 pad_sd1_data2; - u32 pad_sd1_data3; - u32 pad_kpp_row0; - u32 pad_kpp_row1; - u32 pad_kpp_row2; - u32 pad_kpp_row3; - u32 pad_kpp_col0; - u32 pad_kpp_col1; - u32 pad_kpp_col2; - u32 pad_kpp_col3; - u32 pad_fec_mdc; - u32 pad_fec_mdio; - u32 pad_fec_tdata0; - u32 pad_fec_tdata1; - u32 pad_fec_tx_en; - u32 pad_fec_rdata0; - u32 pad_fec_rdata1; - u32 pad_fec_rx_dv; - u32 pad_fec_tx_clk; - u32 pad_rtck; - u32 pad_de_b; - u32 pad_gpio_a; - u32 pad_gpio_b; - u32 pad_gpio_c; - u32 pad_gpio_d; - u32 pad_gpio_e; - u32 pad_gpio_f; - u32 pad_ext_armclk; - u32 pad_upll_bypclk; - u32 pad_vstby_req; - u32 pad_vstby_ack; - u32 pad_power_fail; - u32 pad_clko; - u32 pad_boot_mode0; - u32 pad_boot_mode1; -}; - -/* - * software pad control - */ -/* Select 3.3 or 1.8 volts */ -#define MX25_PIN_PAD_CTL_DVS_33 (0 << 13) -#define MX25_PIN_PAD_CTL_DVS_18 (1 << 13) -/* Enable hysteresis */ -#define MX25_PIN_PAD_CTL_HYS (1 << 8) -/* Enable pull/keeper */ -#define MX25_PIN_PAD_CTL_PKE (1 << 7) -/* 0 - keeper / 1 - pull */ -#define MX25_PIN_PAD_CTL_PUE (1 << 6) -/* pull up/down strength */ -#define MX25_PIN_PAD_CTL_100K_PD (0 << 4) -#define MX25_PIN_PAD_CTL_47K_PU (1 << 4) -#define MX25_PIN_PAD_CTL_100K_PU (2 << 4) -#define MX25_PIN_PAD_CTL_22K_PU (3 << 4) -/* open drain control */ -#define MX25_PIN_PAD_CTL_OD (1 << 3) -/* drive strength */ -#define MX25_PIN_PAD_CTL_DS_NOM (0 << 1) -#define MX25_PIN_PAD_CTL_DS_HIGH (1 << 1) -#define MX25_PIN_PAD_CTL_DS_MAX (2 << 1) -#define MX25_PIN_PAD_CTL_DS_MAX11 (3 << 1) -/* slew rate */ -#define MX25_PIN_PAD_CTL_SRE_SLOW (0 << 0) -#define MX25_PIN_PAD_CTL_SRE_FAST (1 << 0) -struct iomuxc_pad_ctl { - u32 pad_a13; - u32 pad_a14; - u32 pad_a15; - u32 pad_a17; - u32 pad_a18; - u32 pad_a19; - u32 pad_a20; - u32 pad_a21; - u32 pad_a23; - u32 pad_a24; - u32 pad_a25; - u32 pad_eb0; - u32 pad_eb1; - u32 pad_oe; - u32 pad_cs4; - u32 pad_cs5; - u32 pad_nf_ce0; - u32 pad_ecb; - u32 pad_lba; - u32 pad_rw; - u32 pad_nfrb; - u32 pad_d15; - u32 pad_d14; - u32 pad_d13; - u32 pad_d12; - u32 pad_d11; - u32 pad_d10; - u32 pad_d9; - u32 pad_d8; - u32 pad_d7; - u32 pad_d6; - u32 pad_d5; - u32 pad_d4; - u32 pad_d3; - u32 pad_d2; - u32 pad_d1; - u32 pad_d0; - u32 pad_ld0; - u32 pad_ld1; - u32 pad_ld2; - u32 pad_ld3; - u32 pad_ld4; - u32 pad_ld5; - u32 pad_ld6; - u32 pad_ld7; - u32 pad_ld8; - u32 pad_ld9; - u32 pad_ld10; - u32 pad_ld11; - u32 pad_ld12; - u32 pad_ld13; - u32 pad_ld14; - u32 pad_ld15; - u32 pad_hsync; - u32 pad_vsync; - u32 pad_lsclk; - u32 pad_oe_acd; - u32 pad_contrast; - u32 pad_pwm; - u32 pad_csi_d2; - u32 pad_csi_d3; - u32 pad_csi_d4; - u32 pad_csi_d5; - u32 pad_csi_d6; - u32 pad_csi_d7; - u32 pad_csi_d8; - u32 pad_csi_d9; - u32 pad_csi_mclk; - u32 pad_csi_vsync; - u32 pad_csi_hsync; - u32 pad_csi_pixclk; - u32 pad_i2c1_clk; - u32 pad_i2c1_dat; - u32 pad_cspi1_mosi; - u32 pad_cspi1_miso; - u32 pad_cspi1_ss0; - u32 pad_cspi1_ss1; - u32 pad_cspi1_sclk; - u32 pad_cspi1_rdy; - u32 pad_uart1_rxd; - u32 pad_uart1_txd; - u32 pad_uart1_rts; - u32 pad_uart1_cts; - u32 pad_uart2_rxd; - u32 pad_uart2_txd; - u32 pad_uart2_rts; - u32 pad_uart2_cts; - u32 pad_sd1_cmd; - u32 pad_sd1_clk; - u32 pad_sd1_data0; - u32 pad_sd1_data1; - u32 pad_sd1_data2; - u32 pad_sd1_data3; - u32 pad_kpp_row0; - u32 pad_kpp_row1; - u32 pad_kpp_row2; - u32 pad_kpp_row3; - u32 pad_kpp_col0; - u32 pad_kpp_col1; - u32 pad_kpp_col2; - u32 pad_kpp_col3; - u32 pad_fec_mdc; - u32 pad_fec_mdio; - u32 pad_fec_tdata0; - u32 pad_fec_tdata1; - u32 pad_fec_tx_en; - u32 pad_fec_rdata0; - u32 pad_fec_rdata1; - u32 pad_fec_rx_dv; - u32 pad_fec_tx_clk; - u32 pad_rtck; - u32 pad_tdo; - u32 pad_de_b; - u32 pad_gpio_a; - u32 pad_gpio_b; - u32 pad_gpio_c; - u32 pad_gpio_d; - u32 pad_gpio_e; - u32 pad_gpio_f; - u32 pad_vstby_req; - u32 pad_vstby_ack; - u32 pad_power_fail; - u32 pad_clko; -}; - - -/* - * Pad group drive strength and voltage select - * Same fields as iomuxc_pad_ctl plus ddr type - */ -/* Select DDR type */ -#define MX25_PIN_PAD_CTL_DDR_18 (0 << 11) -#define MX25_PIN_PAD_CTL_DDR_33 (1 << 11) -#define MX25_PIN_PAD_CTL_DDR_MAX (2 << 11) -struct iomuxc_pad_grp_ctl { - u32 grp_dvs_misc; - u32 grp_dse_fec; - u32 grp_dvs_jtag; - u32 grp_dse_nfc; - u32 grp_dse_csi; - u32 grp_dse_weim; - u32 grp_dse_ddr; - u32 grp_dvs_crm; - u32 grp_dse_kpp; - u32 grp_dse_sdhc1; - u32 grp_dse_lcd; - u32 grp_dse_uart; - u32 grp_dvs_nfc; - u32 grp_dvs_csi; - u32 grp_dse_cspi1; - u32 grp_ddrtype; - u32 grp_dvs_sdhc1; - u32 grp_dvs_lcd; -}; - -/* - * Pad input select control - * Select which pad to connect to an input port - * where multiple pads can function as given input - */ -#define MX25_PAD_INPUT_SELECT_DAISY(in) ((in & 0x7) << 0) -struct iomuxc_pad_input_select { - u32 audmux_p4_input_da_amx; - u32 audmux_p4_input_db_amx; - u32 audmux_p4_input_rxclk_amx; - u32 audmux_p4_input_rxfs_amx; - u32 audmux_p4_input_txclk_amx; - u32 audmux_p4_input_txfs_amx; - u32 audmux_p7_input_da_amx; - u32 audmux_p7_input_txfs_amx; - u32 can1_ipp_ind_canrx; - u32 can2_ipp_ind_canrx; - u32 csi_ipp_csi_d_0; - u32 csi_ipp_csi_d_1; - u32 cspi1_ipp_ind_ss3_b; - u32 cspi2_ipp_cspi_clk_in; - u32 cspi2_ipp_ind_dataready_b; - u32 cspi2_ipp_ind_miso; - u32 cspi2_ipp_ind_mosi; - u32 cspi2_ipp_ind_ss0_b; - u32 cspi2_ipp_ind_ss1_b; - u32 cspi3_ipp_cspi_clk_in; - u32 cspi3_ipp_ind_dataready_b; - u32 cspi3_ipp_ind_miso; - u32 cspi3_ipp_ind_mosi; - u32 cspi3_ipp_ind_ss0_b; - u32 cspi3_ipp_ind_ss1_b; - u32 cspi3_ipp_ind_ss2_b; - u32 cspi3_ipp_ind_ss3_b; - u32 esdhc1_ipp_dat4_in; - u32 esdhc1_ipp_dat5_in; - u32 esdhc1_ipp_dat6_in; - u32 esdhc1_ipp_dat7_in; - u32 esdhc2_ipp_card_clk_in; - u32 esdhc2_ipp_cmd_in; - u32 esdhc2_ipp_dat0_in; - u32 esdhc2_ipp_dat1_in; - u32 esdhc2_ipp_dat2_in; - u32 esdhc2_ipp_dat3_in; - u32 esdhc2_ipp_dat4_in; - u32 esdhc2_ipp_dat5_in; - u32 esdhc2_ipp_dat6_in; - u32 esdhc2_ipp_dat7_in; - u32 fec_fec_col; - u32 fec_fec_crs; - u32 fec_fec_rdata_2; - u32 fec_fec_rdata_3; - u32 fec_fec_rx_clk; - u32 fec_fec_rx_er; - u32 i2c2_ipp_scl_in; - u32 i2c2_ipp_sda_in; - u32 i2c3_ipp_scl_in; - u32 i2c3_ipp_sda_in; - u32 kpp_ipp_ind_col_4; - u32 kpp_ipp_ind_col_5; - u32 kpp_ipp_ind_col_6; - u32 kpp_ipp_ind_col_7; - u32 kpp_ipp_ind_row_4; - u32 kpp_ipp_ind_row_5; - u32 kpp_ipp_ind_row_6; - u32 kpp_ipp_ind_row_7; - u32 sim1_pin_sim_rcvd1_in; - u32 sim1_pin_sim_simpd1; - u32 sim1_sim_rcvd1_io; - u32 sim2_pin_sim_rcvd1_in; - u32 sim2_pin_sim_simpd1; - u32 sim2_sim_rcvd1_io; - u32 uart3_ipp_uart_rts_b; - u32 uart3_ipp_uart_rxd_mux; - u32 uart4_ipp_uart_rts_b; - u32 uart4_ipp_uart_rxd_mux; - u32 uart5_ipp_uart_rts_b; - u32 uart5_ipp_uart_rxd_mux; - u32 usb_top_ipp_ind_otg_usb_oc; - u32 usb_top_ipp_ind_uh2_usb_oc; -}; diff --git a/arch/arm/include/asm/arch-mx25/sys_proto.h b/arch/arm/include/asm/arch-mx25/sys_proto.h deleted file mode 100644 index 46db341..0000000 --- a/arch/arm/include/asm/arch-mx25/sys_proto.h +++ /dev/null @@ -1,32 +0,0 @@ -/* - * (C) Copyright 2009 - * Stefano Babic, DENX Software Engineering, sbabic@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef _SYS_PROTO_H_ -#define _SYS_PROTO_H_ - -void mx25_uart1_init_pins(void); -#if defined CONFIG_FEC_MXC -extern void mx25_fec_init_pins(void); -#endif - -#endif |