NDS32: Generic Board Support and Unsupport

	Remove ag101 and ag102 support

Signed-off-by: Kun-Hua Huang <kunhua@andestech.com>

21 files changed, 0 insertions, 1731 deletions

diff --git a/arch/nds32/Kconfig b/arch/nds32/Kconfig
index 98b0282..4fcd01d 100644
--- a/arch/nds32/Kconfig
+++ b/arch/nds32/Kconfig
@@ -8,19 +8,11 @@ choice
 	prompt "Target select"
 	optional
 
-config TARGET_ADP_AG101
-	bool "Support adp-ag101"
-
 config TARGET_ADP_AG101P
 	bool "Support adp-ag101p"
 
-config TARGET_ADP_AG102
-	bool "Support adp-ag102"
-
 endchoice
 
-source "board/AndesTech/adp-ag101/Kconfig"
 source "board/AndesTech/adp-ag101p/Kconfig"
-source "board/AndesTech/adp-ag102/Kconfig"
 
 endmenu
diff --git a/arch/nds32/cpu/n1213/ag102/Makefile b/arch/nds32/cpu/n1213/ag102/Makefile
deleted file mode 100644
index c21ce02..0000000
--- a/arch/nds32/cpu/n1213/ag102/Makefile
+++ /dev/null
@@ -1,21 +0,0 @@
-#
-# (C) Copyright 2009
-# Marvell Semiconductor <www.marvell.com>
-# Written-by: Prafulla Wadaskar <prafulla@marvell.com>
-#
-# Copyright (C) 2011 Andes Technology Corporation
-# Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com>
-# Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	:= cpu.o timer.o
-
-ifndef CONFIG_SKIP_LOWLEVEL_INIT
-obj-y	+= lowlevel_init.o
-endif
-
-ifndef CONFIG_SKIP_TRUNOFF_WATCHDOG
-obj-y	+= watchdog.o
-endif
diff --git a/arch/nds32/cpu/n1213/ag102/cpu.c b/arch/nds32/cpu/n1213/ag102/cpu.c
deleted file mode 100644
index 2ee45d2..0000000
--- a/arch/nds32/cpu/n1213/ag102/cpu.c
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
- *
- * Copyright (C) 2011 Andes Technology Corporation
- * Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com>
- * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/* CPU specific code */
-#include <common.h>
-#include <command.h>
-#include <watchdog.h>
-#include <asm/cache.h>
-
-#include <faraday/ftwdt010_wdt.h>
-
-/*
- * cleanup_before_linux() is called just before we call linux
- * it prepares the processor for linux
- *
- * we disable interrupt and caches.
- */
-int cleanup_before_linux(void)
-{
-	disable_interrupts();
-
-#ifdef CONFIG_MMU
-	/* turn off I/D-cache */
-	icache_disable();
-	dcache_disable();
-
-	/* flush I/D-cache */
-	invalidate_icac();
-	invalidate_dcac();
-#endif
-
-	return 0;
-}
-
-int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
-	disable_interrupts();
-
-	/*
-	 * reset to the base addr of andesboot.
-	 * currently no ROM loader at addr 0.
-	 * do not use reset_cpu(0);
-	 */
-#ifdef CONFIG_FTWDT010_WATCHDOG
-	/*
-	 * workaround: if we use CONFIG_HW_WATCHDOG with ftwdt010, will lead
-	 * automatic hardware reset when booting Linux.
-	 * Please do not use CONFIG_HW_WATCHDOG and WATCHDOG_RESET() here.
-	 */
-	ftwdt010_wdt_reset();
-#endif /* CONFIG_FTWDT010_WATCHDOG */
-	hang();
-
-	/*NOTREACHED*/
-}
diff --git a/arch/nds32/cpu/n1213/ag102/lowlevel_init.S b/arch/nds32/cpu/n1213/ag102/lowlevel_init.S
deleted file mode 100644
index 238410d..0000000
--- a/arch/nds32/cpu/n1213/ag102/lowlevel_init.S
+++ /dev/null
@@ -1,307 +0,0 @@
-/*
- * Copyright (C) 2011 Andes Technology Corporation
- * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-.text
-
-#include <common.h>
-#include <config.h>
-
-#include <asm/macro.h>
-#include <generated/asm-offsets.h>
-
-/*
- * parameters for Synopsys DWC DDR2/DDR1 Memory Controller
- */
-#define DDR2C_BASE_A		(CONFIG_DWCDDR21MCTL_BASE)
-#define DDR2C_CCR_A		(DDR2C_BASE_A + DWCDDR21MCTL_CCR)
-#define DDR2C_DCR_A		(DDR2C_BASE_A + DWCDDR21MCTL_DCR)
-#define DDR2C_IOCR_A		(DDR2C_BASE_A + DWCDDR21MCTL_IOCR)
-#define DDR2C_CSR_A		(DDR2C_BASE_A + DWCDDR21MCTL_CSR)
-#define DDR2C_DRR_A		(DDR2C_BASE_A + DWCDDR21MCTL_DRR)
-#define DDR2C_DLLCR0_A		(DDR2C_BASE_A + DWCDDR21MCTL_DLLCR0)
-#define DDR2C_DLLCR1_A		(DDR2C_BASE_A + DWCDDR21MCTL_DLLCR1)
-#define DDR2C_DLLCR2_A		(DDR2C_BASE_A + DWCDDR21MCTL_DLLCR2)
-#define DDR2C_DLLCR3_A		(DDR2C_BASE_A + DWCDDR21MCTL_DLLCR3)
-#define DDR2C_DLLCR4_A		(DDR2C_BASE_A + DWCDDR21MCTL_DLLCR4)
-#define DDR2C_DLLCR5_A		(DDR2C_BASE_A + DWCDDR21MCTL_DLLCR5)
-#define DDR2C_DLLCR6_A		(DDR2C_BASE_A + DWCDDR21MCTL_DLLCR6)
-#define DDR2C_DLLCR7_A		(DDR2C_BASE_A + DWCDDR21MCTL_DLLCR7)
-#define DDR2C_DLLCR8_A		(DDR2C_BASE_A + DWCDDR21MCTL_DLLCR8)
-#define DDR2C_DLLCR9_A		(DDR2C_BASE_A + DWCDDR21MCTL_DLLCR9)
-#define DDR2C_RSLR0_A		(DDR2C_BASE_A + DWCDDR21MCTL_RSLR0)
-#define DDR2C_RDGR0_A		(DDR2C_BASE_A + DWCDDR21MCTL_RDGR0)
-#define DDR2C_DTAR_A		(DDR2C_BASE_A + DWCDDR21MCTL_DTAR)
-#define DDR2C_MR_A		(DDR2C_BASE_A + DWCDDR21MCTL_MR)
-
-#define DDR2C_CCR_D		CONFIG_SYS_DWCDDR21MCTL_CCR
-#define DDR2C_CCR_D2		CONFIG_SYS_DWCDDR21MCTL_CCR2
-#define DDR2C_DCR_D		CONFIG_SYS_DWCDDR21MCTL_DCR
-#define DDR2C_IOCR_D		CONFIG_SYS_DWCDDR21MCTL_IOCR
-#define DDR2C_CSR_D		CONFIG_SYS_DWCDDR21MCTL_CSR
-#define DDR2C_DRR_D		CONFIG_SYS_DWCDDR21MCTL_DRR
-#define DDR2C_RSLR0_D		CONFIG_SYS_DWCDDR21MCTL_RSLR0
-#define DDR2C_RDGR0_D		CONFIG_SYS_DWCDDR21MCTL_RDGR0
-#define DDR2C_DTAR_D		CONFIG_SYS_DWCDDR21MCTL_DTAR
-#define DDR2C_MR_D		CONFIG_SYS_DWCDDR21MCTL_MR
-
-#define DDR2C_DLLCR0_D	CONFIG_SYS_DWCDDR21MCTL_DLLCR0	/* 0-9 are same */
-
-/*
- * parameters for the ahbc controller
- */
-#define AHBC_CR_A		(CONFIG_FTAHBC020S_BASE + FTAHBC020S_CR)
-#define AHBC_BSR6_A	(CONFIG_FTAHBC020S_BASE + FTAHBC020S_SLAVE_BSR_6)
-
-#define AHBC_BSR6_D		CONFIG_SYS_FTAHBC020S_SLAVE_BSR_6
-
-/*
- * parameters for the ANDES PCU controller
- */
-#define PCU_PCS4_A		(CONFIG_ANDES_PCU_BASE + ANDES_PCU_PCS4)
-#define PCU_PCS4_D		CONFIG_SYS_ANDES_CPU_PCS4
-
-/*
- * numeric 7 segment display
- */
-.macro	led, num
-	write32	CONFIG_DEBUG_LED, \num
-.endm
-
-/*
- * Waiting for SDRAM to set up
- */
-/*
-.macro	wait_sdram
-	li	$r0, DDR2C_CSR_A
-1:
-	lwi	$r1, [$r0+FTSDMC021_CR2]
-	bnez	$r1, 1b
-.endm
-*/
-
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT
-.globl	lowlevel_init
-lowlevel_init:
-	move	$r10, $lp
-
-	/* U200 */
-!	led	0x00
-!	jal	scale_to_500mhz
-
-	led	0x10
-	jal	mem_init
-
-	led	0x20
-	jal	remap
-
-#if (defined(NDS32_EXT_FPU_DP) || defined(NDS32_EXT_FPU_SP))
-	led	0x2f
-	jal	enable_fpu
-#endif
-
-	led	0x30
-	ret	$r10
-
-scale_to_500mhz:
-	move	$r11, $lp
-
-	/*
-	 * scale to 500Mhz
-	 */
-	led	0x01
-	write32	PCU_PCS4_A, 0x1102000f			! save data to PCS4
-
-	move	$lp, $r11
-	ret
-
-mem_init:
-	move	$r11, $lp
-
-	/*
-	 * config AHB Controller
-	 */
-	led	0x12
-	write32	AHBC_BSR6_A, AHBC_BSR6_D
-
-	/*
-	 * config Synopsys DWC DDR2/DDR1 Memory Controller
-	 */
-ddr2c_init:
-set_dcr:
-	led	0x14
-	write32	DDR2C_DCR_A, DDR2C_DCR_D			! 0x000020d4
-
-auto_sizing:
-	/*
-	 * ebios: $r10->$r7, $r11->$r8, $r12->$r9, $r13->$r12, $r14->$r13
-	 */
-set_iocr:
-	led	0x19
-	write32 DDR2C_IOCR_A, DDR2C_IOCR_D
-set_drr:
-	led	0x16
-	write32	DDR2C_DRR_A, DDR2C_DRR_D			! 0x00034812
-set_dllcr:
-	led	0x18
-	write32 DDR2C_DLLCR0_A, DDR2C_DLLCR0_D
-	write32 DDR2C_DLLCR1_A, DDR2C_DLLCR0_D
-	write32 DDR2C_DLLCR2_A, DDR2C_DLLCR0_D
-	write32 DDR2C_DLLCR3_A, DDR2C_DLLCR0_D
-	write32 DDR2C_DLLCR4_A, DDR2C_DLLCR0_D
-	write32 DDR2C_DLLCR5_A, DDR2C_DLLCR0_D
-	write32 DDR2C_DLLCR6_A, DDR2C_DLLCR0_D
-	write32 DDR2C_DLLCR7_A, DDR2C_DLLCR0_D
-	write32 DDR2C_DLLCR8_A, DDR2C_DLLCR0_D
-	write32 DDR2C_DLLCR9_A, DDR2C_DLLCR0_D
-set_rslr0:
-	write32 DDR2C_RSLR0_A, DDR2C_RSLR0_D			! 0x00000040
-set_rdgr0:
-	write32 DDR2C_RDGR0_A, DDR2C_RDGR0_D			! 0x000055cf
-set_dtar:
-	led	0x15
-	write32	DDR2C_DTAR_A, DDR2C_DTAR_D			! 0x00100000
-set_mode:
-	led	0x17
-	write32	DDR2C_MR_A, DDR2C_MR_D				! 0x00000852
-set_ccr:
-	write32 DDR2C_CCR_A, DDR2C_CCR_D
-
-#ifdef TRIGGER_INIT:
-trigger_init:
-	write32 DDR2C_CCR_A, DDR2C_CCR_D			! 0x80020000
-
-	/* Wait for ddr init state to be set */
-	msync	ALL
-	isb
-
-	/* Wait until the config initialization is finish */
-1:
-	la	$r4, DDR2C_CSR_A
-	lwi	$r5, [$r4]
-	srli	$r5, $r5, 23
-	bnez	$r5, 1b
-#endif
-
-data_training:
-!	write32	DDR2C_CCR_A, DDR2C_CCR_D2			! 0x40020004
-
-	/* Wait for ddr init state to be set */
-	msync	ALL
-	isb
-
-	/* wait until the ddr data trainning is complete */
-1:
-	la	$r4, DDR2C_CSR_A
-	lwi	$r5, [$r4]
-	srli	$r6, $r5, 23
-	bnez	$r6, 1b
-
-	lwi	$r1, [$r4]
-	srli	$r6, $r5, 20
-	li	$r5, 0x00ffffff
-	swi	$r1, [$r4]
-	bnez	$r6, ddr2c_init
-
-	led	0x1a
-	move	$lp, $r11
-	ret
-
-remap:
-	move	$r11, $lp
-#ifdef __NDS32_N1213_43U1H__	/* NDS32 V0 ISA - AG101 Only */
-	bal	2f
-relo_base:
-	move	$r0, $lp
-#else
-relo_base:
-	mfusr	$r0, $pc
-#endif /* __NDS32_N1213_43U1H__ */
-
-	/*
-	 * Remapping
-	 */
-#ifdef CONFIG_MEM_REMAP
-	/*
-	 * Copy ROM code to SDRAM base for memory remap layout.
-	 * This is not the real relocation, the real relocation is the function
-	 * relocate_code() is start.S which supports the systems is memory
-	 * remapped or not.
-	 */
-	/*
-	 * Doing memory remap is essential for preparing some non-OS or RTOS
-	 * applications.
-	 *
-	 * This is also a must on ADP-AG101 board.
-	 * The reason is because the ROM/FLASH circuit on PCB board.
-	 * AG101-A0 board has 2 jumpers MA17 and SW5 to configure which
-	 * ROM/FLASH is used to boot.
-	 *
-	 * When SW5 = "0101", MA17 = LO, the ROM is connected to BANK0,
-	 * and the FLASH is connected to BANK1.
-	 * When SW5 = "1010", MA17 = HI, the ROM is disabled (still at BANK0),
-	 * and the FLASH is connected to BANK0.
-	 * It will occur problem when doing flash probing if the flash is at
-	 * BANK0 (0x00000000) while memory remapping was skipped.
-	 *
-	 * Other board like ADP-AG101P may not enable this since there is only
-	 * a FLASH connected to bank0.
-	 */
-	led	0x21
-	li	$r4, PHYS_SDRAM_0_AT_INIT		/* 0x10000000 */
-	li	$r5, 0x0
-	la	$r1, relo_base				/* get $pc or $lp */
-	sub	$r2, $r0, $r1
-	sethi	$r6, hi20(_end)
-	ori	$r6, $r6, lo12(_end)
-	add	$r6, $r6, $r2
-1:
-	lwi.p	$r7, [$r5], #4
-	swi.p	$r7, [$r4], #4
-	blt	$r5, $r6, 1b
-
-	/* set remap bit */
-	/*
-	 * MEM remap bit is operational
-	 * - use it to map writeable memory at 0x00000000, in place of flash
-	 * - before remap: flash/rom 0x00000000, sdram: 0x10000000-0x4fffffff
-	 * - after  remap: flash/rom 0x80000000, sdram: 0x00000000
-	 */
-	led	0x2c
-	setbf15	AHBC_CR_A, FTAHBC020S_CR_REMAP		! 0x1
-
-#endif /* #ifdef CONFIG_MEM_REMAP */
-	move	$lp, $r11
-2:
-	ret
-
-	/*
-	 * enable_fpu:
-	 *  Some of Andes CPU version support FPU coprocessor, if so,
-	 *  and toolchain support FPU instruction set, we should enable it.
-	 */
-#if (defined(NDS32_EXT_FPU_DP) || defined(NDS32_EXT_FPU_SP))
-enable_fpu:
-	mfsr    $r0, $CPU_VER     /* enable FPU if it exists */
-	srli    $r0, $r0, 3
-	andi    $r0, $r0, 1
-	beqz    $r0, 1f           /* skip if no COP */
-	mfsr    $r0, $FUCOP_EXIST
-	srli    $r0, $r0, 31
-	beqz    $r0, 1f           /* skip if no FPU */
-	mfsr    $r0, $FUCOP_CTL
-	ori     $r0, $r0, 1
-	mtsr    $r0, $FUCOP_CTL
-1:
-	ret
-#endif
-
-.globl show_led
-show_led:
-    li      $r8, (CONFIG_DEBUG_LED)
-    swi     $r7, [$r8]
-    ret
-#endif /* #ifndef CONFIG_SKIP_LOWLEVEL_INIT */
diff --git a/arch/nds32/cpu/n1213/ag102/timer.c b/arch/nds32/cpu/n1213/ag102/timer.c
deleted file mode 100644
index 758b354..0000000
--- a/arch/nds32/cpu/n1213/ag102/timer.c
+++ /dev/null
@@ -1,191 +0,0 @@
-/*
- * (C) Copyright 2009 Faraday Technology
- * Po-Yu Chuang <ratbert@faraday-tech.com>
- *
- * Copyright (C) 2011 Andes Technology Corporation
- * Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com>
- * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <faraday/fttmr010.h>
-
-static ulong timestamp;
-static ulong lastdec;
-
-int timer_init(void)
-{
-	struct fttmr010 *tmr = (struct fttmr010 *)CONFIG_FTTMR010_BASE;
-	unsigned int cr;
-
-	debug("%s()\n", __func__);
-
-	/* disable timers */
-	writel(0, &tmr->cr);
-
-#ifdef CONFIG_FTTMR010_EXT_CLK
-	/* use 32768Hz oscillator for RTC, WDT, TIMER */
-	ftpmu010_32768osc_enable();
-#endif
-
-	/* setup timer */
-	writel(TIMER_LOAD_VAL, &tmr->timer3_load);
-	writel(TIMER_LOAD_VAL, &tmr->timer3_counter);
-	writel(0, &tmr->timer3_match1);
-	writel(0, &tmr->timer3_match2);
-
-	/* we don't want timer to issue interrupts */
-	writel(FTTMR010_TM3_MATCH1 |
-	       FTTMR010_TM3_MATCH2 |
-	       FTTMR010_TM3_OVERFLOW,
-	       &tmr->interrupt_mask);
-
-	cr = readl(&tmr->cr);
-#ifdef CONFIG_FTTMR010_EXT_CLK
-	cr |= FTTMR010_TM3_CLOCK;	/* use external clock */
-#endif
-	cr |= FTTMR010_TM3_ENABLE;
-	writel(cr, &tmr->cr);
-
-	/* init the timestamp and lastdec value */
-	reset_timer_masked();
-
-	return 0;
-}
-
-/*
- * timer without interrupts
- */
-
-/*
- * reset time
- */
-void reset_timer_masked(void)
-{
-	struct fttmr010 *tmr = (struct fttmr010 *)CONFIG_FTTMR010_BASE;
-
-	/* capure current decrementer value time */
-#ifdef CONFIG_FTTMR010_EXT_CLK
-	lastdec = readl(&tmr->timer3_counter) / (TIMER_CLOCK / CONFIG_SYS_HZ);
-#else
-	lastdec = readl(&tmr->timer3_counter) /
-			(CONFIG_SYS_CLK_FREQ / 2 / CONFIG_SYS_HZ);
-#endif
-	timestamp = 0;		/* start "advancing" time stamp from 0 */
-
-	debug("%s(): lastdec = %lx\n", __func__, lastdec);
-}
-
-void reset_timer(void)
-{
-	debug("%s()\n", __func__);
-	reset_timer_masked();
-}
-
-/*
- * return timer ticks
- */
-ulong get_timer_masked(void)
-{
-	struct fttmr010 *tmr = (struct fttmr010 *)CONFIG_FTTMR010_BASE;
-
-	/* current tick value */
-#ifdef CONFIG_FTTMR010_EXT_CLK
-	ulong now = readl(&tmr->timer3_counter) / (TIMER_CLOCK / CONFIG_SYS_HZ);
-#else
-	ulong now = readl(&tmr->timer3_counter) /
-			(CONFIG_SYS_CLK_FREQ / 2 / CONFIG_SYS_HZ);
-#endif
-
-	debug("%s(): now = %lx, lastdec = %lx\n", __func__, now, lastdec);
-
-	if (lastdec >= now) {
-		/*
-		 * normal mode (non roll)
-		 * move stamp fordward with absoulte diff ticks
-		 */
-		timestamp += lastdec - now;
-	} else {
-		/*
-		 * we have overflow of the count down timer
-		 *
-		 * nts = ts + ld + (TLV - now)
-		 * ts=old stamp, ld=time that passed before passing through -1
-		 * (TLV-now) amount of time after passing though -1
-		 * nts = new "advancing time stamp"...it could also roll and
-		 * cause problems.
-		 */
-		timestamp += lastdec + TIMER_LOAD_VAL - now;
-	}
-
-	lastdec = now;
-
-	debug("%s() returns %lx\n", __func__, timestamp);
-
-	return timestamp;
-}
-
-/*
- * return difference between timer ticks and base
- */
-ulong get_timer(ulong base)
-{
-	debug("%s(%lx)\n", __func__, base);
-	return get_timer_masked() - base;
-}
-
-void set_timer(ulong t)
-{
-	debug("%s(%lx)\n", __func__, t);
-	timestamp = t;
-}
-
-/* delay x useconds AND preserve advance timestamp value */
-void __udelay(unsigned long usec)
-{
-	struct fttmr010 *tmr = (struct fttmr010 *)CONFIG_FTTMR010_BASE;
-
-#ifdef CONFIG_FTTMR010_EXT_CLK
-	long tmo = usec * (TIMER_CLOCK / 1000) / 1000;
-#else
-	long tmo = usec * ((CONFIG_SYS_CLK_FREQ / 2) / 1000) / 1000;
-#endif
-	unsigned long now, last = readl(&tmr->timer3_counter);
-
-	debug("%s(%lu)\n", __func__, usec);
-	while (tmo > 0) {
-		now = readl(&tmr->timer3_counter);
-		if (now > last) /* count down timer overflow */
-			tmo -= TIMER_LOAD_VAL + last - now;
-		else
-			tmo -= last - now;
-		last = now;
-	}
-}
-
-/*
- * This function is derived from PowerPC code (read timebase as long long).
- * On ARM it just returns the timer value.
- */
-unsigned long long get_ticks(void)
-{
-	debug("%s()\n", __func__);
-	return get_timer(0);
-}
-
-/*
- * This function is derived from PowerPC code (timebase clock frequency).
- * On ARM it returns the number of timer ticks per second.
- */
-ulong get_tbclk(void)
-{
-	debug("%s()\n", __func__);
-#ifdef CONFIG_FTTMR010_EXT_CLK
-	return CONFIG_SYS_HZ;
-#else
-	return CONFIG_SYS_CLK_FREQ;
-#endif
-}
diff --git a/arch/nds32/cpu/n1213/ag102/watchdog.S b/arch/nds32/cpu/n1213/ag102/watchdog.S
deleted file mode 100644
index 8f450af..0000000
--- a/arch/nds32/cpu/n1213/ag102/watchdog.S
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * Copyright (C) 2011 Andes Technology Corporation
- * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <asm/arch-ag102/ag102.h>
-#include <linux/linkage.h>
-
-.text
-
-#ifndef CONFIG_SKIP_TRUNOFF_WATCHDOG
-ENTRY(turnoff_watchdog)
-
-#define WD_CR		0xC
-#define WD_ENABLE	0x1
-
-	! Turn off the watchdog, according to Faraday FTWDT010 spec
-	li 	$p0, (CONFIG_FTWDT010_BASE+WD_CR)	! Get the addr of WD CR
-	lwi	$p1, [$p0]				! Get the config of WD
-	andi	$p1, $p1, 0x1f				! Wipe out useless bits
-	li	$r0, ~WD_ENABLE
-	and	$p1, $p1, $r0				! Set WD disable
-	sw	$p1, [$p0]				! Write back to WD CR
-
-	! Disable Interrupts by clear GIE in $PSW reg
-	setgie.d
-
-	ret
-
-ENDPROC(turnoff_watchdog)
-#endif
diff --git a/arch/nds32/include/asm/mach-types.h b/arch/nds32/include/asm/mach-types.h
index 259e4e7..1959d7e 100644
--- a/arch/nds32/include/asm/mach-types.h
+++ b/arch/nds32/include/asm/mach-types.h
@@ -12,20 +12,6 @@ extern unsigned int __machine_arch_type;
 #endif
 
 /* see arch/arm/kernel/arch.c for a description of these */
-#define MACH_TYPE_ADPAG101             0
-
-#ifdef CONFIG_ARCH_ADPAG101
-# ifdef machine_arch_type
-#  undef machine_arch_type
-#  define machine_arch_type	__machine_arch_type
-# else
-#  define machine_arch_type	MACH_TYPE_ADPAG101
-# endif
-# define machine_is_adpag101()	(machine_arch_type == MACH_TYPE_ADPAG101)
-#else
-# define machine_is_adpag101()	(0)
-#endif
-
 #define MACH_TYPE_ADPAG101P            1
 
 #ifdef CONFIG_ARCH_ADPAG101P
@@ -40,18 +26,4 @@ extern unsigned int __machine_arch_type;
 # define machine_is_adpag101p()	(1)
 #endif
 
-#define MACH_TYPE_ADPAG102             2
-
-#ifdef CONFIG_ARCH_ADPAG102
-# ifdef machine_arch_type
-#  undef machine_arch_type
-#  define machine_arch_type	__machine_arch_type
-# else
-#  define machine_arch_type	MACH_TYPE_ADPAG102
-# endif
-# define machine_is_adpag102()	(machine_arch_type == MACH_TYPE_ADPAG102)
-#else
-# define machine_is_adpag102()	(2)
-#endif
-
 #endif /* __ASM_NDS32_MACH_TYPE_H */
diff --git a/board/AndesTech/adp-ag101/Kconfig b/board/AndesTech/adp-ag101/Kconfig
deleted file mode 100644
index 8f0197a..0000000
--- a/board/AndesTech/adp-ag101/Kconfig
+++ /dev/null
@@ -1,18 +0,0 @@
-if TARGET_ADP_AG101
-
-config SYS_CPU
-	default "n1213"
-
-config SYS_BOARD
-	default "adp-ag101"
-
-config SYS_VENDOR
-	default "AndesTech"
-
-config SYS_SOC
-	default "ag101"
-
-config SYS_CONFIG_NAME
-	default "adp-ag101"
-
-endif
diff --git a/board/AndesTech/adp-ag101/MAINTAINERS b/board/AndesTech/adp-ag101/MAINTAINERS
deleted file mode 100644
index 1f0169b..0000000
--- a/board/AndesTech/adp-ag101/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-ADP-AG101 BOARD
-M:	Andes <uboot@andestech.com>
-S:	Maintained
-F:	board/AndesTech/adp-ag101/
-F:	include/configs/adp-ag101.h
-F:	configs/adp-ag101_defconfig
diff --git a/board/AndesTech/adp-ag101/Makefile b/board/AndesTech/adp-ag101/Makefile
deleted file mode 100644
index 4cc590f..0000000
--- a/board/AndesTech/adp-ag101/Makefile
+++ /dev/null
@@ -1,9 +0,0 @@
-#
-# Copyright (C) 2011 Andes Technology Corporation
-# Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com>
-# Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	:= adp-ag101.o
diff --git a/board/AndesTech/adp-ag101/README b/board/AndesTech/adp-ag101/README
deleted file mode 100644
index 46fc637..0000000
--- a/board/AndesTech/adp-ag101/README
+++ /dev/null
@@ -1,74 +0,0 @@
-Andes Technology SoC AG101
-==========================
-
-AG101 is the first SoC produced by Andes Technology using N1213 CPU core.
-AG101 has integrated both AHB and APB bus and many periphals for application
-and product development.
-
-ADP-AG101
-=========
-
-ADP-AG101 is the SoC with AG101 hardcore CPU.
-
-Please check http://www.andestech.com/p2-4.htm for detail of this SoC.
-
-Configurations
-==============
-
-CONFIG_MEM_REMAP:
-	Doing memory remap is essential for preparing some non-OS or RTOS
-	applications.
-
-	This is also a must on ADP-AG101 board.
-	(While other boards may not have this problem).
-
-	The reason is because the ROM/FLASH circuit on PCB board.
-	AG101-A0 board has 2 jumpers MA17 and SW5 to configure which
-	ROM/FLASH is used to boot.
-
-	When SW5 = "0101", MA17 = LO, the ROM is connected to BANK0,
-	and the FLASH is connected to BANK1.
-	When SW5 = "1010", MA17 = HI, the ROM is disabled (still at BANK0),
-	and the FLASH is connected to BANK0.
-	It will occur problem when doing flash probing if the flash is at
-	BANK0 (0x00000000) while memory remapping was skipped.
-
-	Other board like ADP-AG101P may not enable this since there is only
-	a FLASH connected to bank0.
-
-CONFIG_SKIP_LOWLEVEL_INIT:
-	If you want to boot this system from FLASH and bypass e-bios (the
-	other boot loader on ROM). You should undefine CONFIG_SKIP_LOWLEVEL_INIT
-	in "include/configs/adp-ag101.h".
-
-Build and boot steps
-====================
-
-build:
-1. Prepare the toolchains and make sure the $PATH to toolchains is correct.
-2. Use `make adp-ag101` in u-boot root to build the image.
-
-burn u-boot to flash:
-1. Make sure the MA17 (J16) is Lo.
-2. Make sure the dip switch SW5 is set to "0101".
-3. Power On. Press button "S1", then press button "SW1", then you will found the
-   debug LED show 67 means the system successfully booted into e-bios.
-   Now you can control the e-bios boot loader from your console.
-4. Under "Command>>" prompt, enter "97" (CopyImageFromCard)
-5. Under "Type Dir Name of [CF/SD] =>" promtp, enter "c".
-6. Under "Enter Filename =>" prompt, enter the file name of u-boot image you
-   just build. It is usually "u-boot.bin".
-7. Under "Enter Dest. Address =>" prompt, enter the memory address where you
-   want to put the binary from SD card to RAM.
-   Address "0x500000" is our suggestion.
-8. Under "Command>>" prompt again, enter "55" (CLI) to use interactive command
-   environment.
-9. Under "CLI>" prompt, enter "burn 0x500000 0x80400000 0x30000" to burn the
-   binary from RAM to FLASH.
-10. Under "CLI>" prompt, enter "exit" to finish the burn process.
-
-boot u-boot from flash:
-1. Make sure the MA17 (J16) is Hi).
-2. Make sure the dip switch SW5 is set to "1010".
-3. Power On. Press button "S1", then you will see the debug LED count to 20.
-4. Now you can use u-boot on ADP-AG101 board.
diff --git a/board/AndesTech/adp-ag101/adp-ag101.c b/board/AndesTech/adp-ag101/adp-ag101.c
deleted file mode 100644
index 9884a5b..0000000
--- a/board/AndesTech/adp-ag101/adp-ag101.c
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * Copyright (C) 2011 Andes Technology Corporation
- * Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com>
- * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <netdev.h>
-#include <asm/io.h>
-
-#include <faraday/ftsdc010.h>
-#include <faraday/ftsmc020.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * Miscellaneous platform dependent initializations
- */
-
-int board_init(void)
-{
-	/*
-	 * refer to BOOT_PARAMETER_PA_BASE within
-	 * "linux/arch/nds32/include/asm/misc_spec.h"
-	 */
-	gd->bd->bi_arch_number = MACH_TYPE_ADPAG101;
-	gd->bd->bi_boot_params = PHYS_SDRAM_0 + 0x400;
-
-	ftsmc020_init();	/* initialize Flash */
-	return 0;
-}
-
-int dram_init(void)
-{
-	unsigned long sdram_base = PHYS_SDRAM_0;
-	unsigned long expected_size = PHYS_SDRAM_0_SIZE + PHYS_SDRAM_1_SIZE;
-	unsigned long actual_size;
-
-	actual_size = get_ram_size((void *)sdram_base, expected_size);
-
-	gd->ram_size = actual_size;
-
-	if (expected_size != actual_size) {
-		printf("Warning: Only %lu of %lu MiB SDRAM is working\n",
-				actual_size >> 20, expected_size >> 20);
-	}
-
-	return 0;
-}
-
-void dram_init_banksize(void)
-{
-	gd->bd->bi_dram[0].start = PHYS_SDRAM_0;
-	gd->bd->bi_dram[0].size =  PHYS_SDRAM_0_SIZE;
-	gd->bd->bi_dram[1].start = PHYS_SDRAM_1;
-	gd->bd->bi_dram[1].size =  PHYS_SDRAM_1_SIZE;
-}
-
-int board_eth_init(bd_t *bd)
-{
-	return ftmac100_initialize(bd);
-}
-
-ulong board_flash_get_legacy(ulong base, int banknum, flash_info_t *info)
-{
-	if (banknum == 0) {	/* non-CFI boot flash */
-		info->portwidth = FLASH_CFI_8BIT;
-		info->chipwidth = FLASH_CFI_BY8;
-		info->interface = FLASH_CFI_X8;
-		return 1;
-	} else {
-		return 0;
-	}
-}
-
-int board_mmc_init(bd_t *bis)
-{
-	ftsdc010_mmc_init(0);
-	return 0;
-}
diff --git a/board/AndesTech/adp-ag102/Kconfig b/board/AndesTech/adp-ag102/Kconfig
deleted file mode 100644
index fc17be3..0000000
--- a/board/AndesTech/adp-ag102/Kconfig
+++ /dev/null
@@ -1,18 +0,0 @@
-if TARGET_ADP_AG102
-
-config SYS_CPU
-	default "n1213"
-
-config SYS_BOARD
-	default "adp-ag102"
-
-config SYS_VENDOR
-	default "AndesTech"
-
-config SYS_SOC
-	default "ag102"
-
-config SYS_CONFIG_NAME
-	default "adp-ag102"
-
-endif
diff --git a/board/AndesTech/adp-ag102/MAINTAINERS b/board/AndesTech/adp-ag102/MAINTAINERS
deleted file mode 100644
index 94b87c7..0000000
--- a/board/AndesTech/adp-ag102/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-ADP-AG102 BOARD
-M:	Andes <uboot@andestech.com>
-S:	Maintained
-F:	board/AndesTech/adp-ag102/
-F:	include/configs/adp-ag102.h
-F:	configs/adp-ag102_defconfig
diff --git a/board/AndesTech/adp-ag102/Makefile b/board/AndesTech/adp-ag102/Makefile
deleted file mode 100644
index fc4bf88..0000000
--- a/board/AndesTech/adp-ag102/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# Copyright (C) 2011 Andes Technology Corporation
-# Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	:= adp-ag102.o
diff --git a/board/AndesTech/adp-ag102/adp-ag102.c b/board/AndesTech/adp-ag102/adp-ag102.c
deleted file mode 100644
index 3f879ab..0000000
--- a/board/AndesTech/adp-ag102/adp-ag102.c
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- * Copyright (C) 2011 Andes Technology Corporation
- * Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com>
- * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <netdev.h>
-#include <asm/io.h>
-
-#include <faraday/ftpci100.h>
-#include <faraday/ftsdc010.h>
-#ifdef CONFIG_FTSMC020
-#include <faraday/ftsmc020.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * Miscellaneous platform dependent initializations
- */
-
-int board_init(void)
-{
-	/*
-	 * refer to BOOT_PARAMETER_PA_BASE within
-	 * "linux/arch/nds32/include/asm/misc_spec.h"
-	 */
-	gd->bd->bi_arch_number = MACH_TYPE_ADPAG102;
-	gd->bd->bi_boot_params = PHYS_SDRAM_0 + 0x400;
-
-#if !defined(CONFIG_SYS_NO_FLASH)
-	ftsmc020_init();	/* initialize Flash */
-#endif /* CONFIG_SYS_NO_FLASH */
-	return 0;
-}
-
-int dram_init(void)
-{
-	unsigned long sdram_base = PHYS_SDRAM_0;
-	unsigned long expected_size = PHYS_SDRAM_0_SIZE;
-	unsigned long actual_size;
-
-	actual_size = get_ram_size((void *)sdram_base, expected_size);
-
-	gd->ram_size = actual_size;
-
-	if (expected_size != actual_size) {
-		printf("Warning: Only %lu of %lu MiB SDRAM is working\n",
-				actual_size >> 20, expected_size >> 20);
-	}
-
-	return 0;
-}
-
-int board_eth_init(bd_t *bd)
-{
-	return ftgmac100_initialize(bd);
-}
-
-#if !defined(CONFIG_SYS_NO_FLASH)
-ulong board_flash_get_legacy(ulong base, int banknum, flash_info_t *info)
-{
-	if (banknum == 0) {	/* non-CFI boot flash */
-		info->portwidth = FLASH_CFI_8BIT;
-		info->chipwidth = FLASH_CFI_BY8;
-		info->interface = FLASH_CFI_X8;
-		return 1;
-	} else {
-		return 0;
-	}
-}
-#endif /* CONFIG_SYS_NO_FLASH */
-
-#if defined(CONFIG_CMD_PCI) || defined(CONFIG_PCI)
-void pci_init_board(void)
-{
-	/* should be pci_ftpci100_init() */
-	pci_ftpci_init();
-}
-#endif
-
-#ifdef CONFIG_GENERIC_MMC
-int board_mmc_init(bd_t *bis)
-{
-	ftsdc010_mmc_init(0);
-	return 0;
-}
-#endif
diff --git a/configs/adp-ag101_defconfig b/configs/adp-ag101_defconfig
deleted file mode 100644
index ac1dcaa..0000000
--- a/configs/adp-ag101_defconfig
+++ /dev/null
@@ -1,4 +0,0 @@
-CONFIG_NDS32=y
-CONFIG_TARGET_ADP_AG101=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_SYS_PROMPT="NDS32 # "
diff --git a/configs/adp-ag102_defconfig b/configs/adp-ag102_defconfig
deleted file mode 100644
index 1bef350..0000000
--- a/configs/adp-ag102_defconfig
+++ /dev/null
@@ -1,6 +0,0 @@
-CONFIG_NDS32=y
-CONFIG_TARGET_ADP_AG102=y
-# CONFIG_CMD_IMLS is not set
-# CONFIG_CMD_FLASH is not set
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_SYS_PROMPT="NDS32 # "
diff --git a/doc/README.ag102 b/doc/README.ag102
deleted file mode 100644
index 7d142a7..0000000
--- a/doc/README.ag102
+++ /dev/null
@@ -1,36 +0,0 @@
-Andes Technology SoC AG102
-==========================
-
-AG102 is the second SoC produced by Andes Technology using N1213 CPU core
-with FPU and DDR contoller support.
-AG102 has integrated both AHB and APB bus and many periphals for application
-and product development.
-
-ADP-AG102
-=========
-
-ADP-AG102 is the SoC with AG102 hardcore CPU.
-
-Configurations
-==============
-
-CONFIG_MEM_REMAP:
-	Doing memory remap is essential for preparing some non-OS or RTOS
-	applications.
-
-CONFIG_SKIP_LOWLEVEL_INIT:
-	If you want to boot this system from SPI ROM and bypass e-bios (the
-	other boot loader on ROM). You should undefine CONFIG_SKIP_LOWLEVEL_INIT
-	in "include/configs/adp-ag102.h".
-
-Build and boot steps
-====================
-
-build:
-1. Prepare the toolchains and make sure the $PATH to toolchains is correct.
-2. Use `make adp-ag102` in u-boot root to build the image.
-
-Burn u-boot to SPI ROM:
-====================
-
-This section will be added later.
diff --git a/include/configs/adp-ag101.h b/include/configs/adp-ag101.h
deleted file mode 100644
index 0f256d8..0000000
--- a/include/configs/adp-ag101.h
+++ /dev/null
@@ -1,384 +0,0 @@
-/*
- * Copyright (C) 2011 Andes Technology Corporation
- * Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com>
- * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#include <asm/arch-ag101/ag101.h>
-
-/*
- * CPU and Board Configuration Options
- */
-#define CONFIG_ADP_AG101
-
-#define CONFIG_USE_INTERRUPT
-
-#define CONFIG_SKIP_LOWLEVEL_INIT
-
-/*
- * Definitions related to passing arguments to kernel.
- */
-#define CONFIG_CMDLINE_TAG			/* send commandline to Kernel */
-#define CONFIG_SETUP_MEMORY_TAGS	/* send memory definition to kernel */
-#define CONFIG_INITRD_TAG			/* send initrd params */
-
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_MEM_REMAP
-#endif
-
-#ifdef CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_SYS_TEXT_BASE	0x03200000
-#else
-#define CONFIG_SYS_TEXT_BASE	0x00000000
-#endif
-
-/*
- * Timer
- */
-#define CONFIG_SYS_CLK_FREQ	48000000
-#define VERSION_CLOCK		CONFIG_SYS_CLK_FREQ
-
-/*
- * Use Externel CLOCK or PCLK
- */
-#undef CONFIG_FTRTC010_EXTCLK
-
-#ifndef CONFIG_FTRTC010_EXTCLK
-#define CONFIG_FTRTC010_PCLK
-#endif
-
-#ifdef CONFIG_FTRTC010_EXTCLK
-#define TIMER_CLOCK	32768			/* CONFIG_FTRTC010_EXTCLK */
-#else
-#define TIMER_CLOCK	CONFIG_SYS_HZ		/* CONFIG_FTRTC010_PCLK */
-#endif
-
-#define TIMER_LOAD_VAL	0xffffffff
-
-/*
- * Real Time Clock
- */
-#define CONFIG_RTC_FTRTC010
-
-/*
- * Real Time Clock Divider
- * RTC_DIV_COUNT			(OSC_CLK/OSC_5MHZ)
- */
-#define OSC_5MHZ			(5*1000000)
-#define OSC_CLK				(2*OSC_5MHZ)
-#define RTC_DIV_COUNT			(OSC_CLK/OSC_5MHZ)
-
-/*
- * Serial console configuration
- */
-
-/* FTUART is a high speed NS 16C550A compatible UART, addr: 0x99600000 */
-#define CONFIG_BAUDRATE			38400
-#define CONFIG_CONS_INDEX		1
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_COM1		CONFIG_FTUART010_02_BASE
-#define CONFIG_SYS_NS16550_REG_SIZE	-4
-#define CONFIG_SYS_NS16550_CLK		((46080000 * 20) / 25)	/* AG101 */
-
-/*
- * Ethernet
- */
-#define CONFIG_FTMAC100
-
-#define CONFIG_BOOTDELAY	3
-
-/*
- * SD (MMC) controller
- */
-#define CONFIG_MMC
-#define CONFIG_CMD_MMC
-#define CONFIG_GENERIC_MMC
-#define CONFIG_DOS_PARTITION
-#define CONFIG_FTSDC010
-#define CONFIG_FTSDC010_NUMBER		1
-#define CONFIG_FTSDC010_SDIO
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_EXT2
-
-/*
- * Command line configuration.
- */
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_PING
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP			/* undef to save memory */
-#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size */
-
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE	\
-	(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-
-/* max number of command args */
-#define CONFIG_SYS_MAXARGS	16
-
-/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
-
-/*
- * Size of malloc() pool
- */
-/* 512kB is suggested, (CONFIG_ENV_SIZE + 128 * 1024) was not enough */
-#define CONFIG_SYS_MALLOC_LEN		(512 << 10)
-
-/*
- * AHB Controller configuration
- */
-#define CONFIG_FTAHBC020S
-
-#ifdef CONFIG_FTAHBC020S
-#include <faraday/ftahbc020s.h>
-
-/* Address of PHYS_SDRAM_0 before memory remap is at 0x(100)00000 */
-#define CONFIG_SYS_FTAHBC020S_SLAVE_BSR_BASE	0x100
-
-/*
- * CONFIG_SYS_FTAHBC020S_SLAVE_BSR_6: this define is used in lowlevel_init.S,
- * hence we cannot use FTAHBC020S_BSR_SIZE(2048) since it will use ffs() wrote
- * in C language.
- */
-#define CONFIG_SYS_FTAHBC020S_SLAVE_BSR_6 \
-	(FTAHBC020S_SLAVE_BSR_BASE(CONFIG_SYS_FTAHBC020S_SLAVE_BSR_BASE) | \
-					FTAHBC020S_SLAVE_BSR_SIZE(0xb))
-#endif
-
-/*
- * Watchdog
- */
-#define CONFIG_FTWDT010_WATCHDOG
-
-/*
- * PMU Power controller configuration
- */
-#define CONFIG_PMU
-#define CONFIG_FTPMU010_POWER
-
-#ifdef CONFIG_FTPMU010_POWER
-#include <faraday/ftpmu010.h>
-#define CONFIG_SYS_FTPMU010_PDLLCR0_HCLKOUTDIS		0x0E
-#define CONFIG_SYS_FTPMU010_SDRAMHTC	(FTPMU010_SDRAMHTC_EBICTRL_DCSR  | \
-					 FTPMU010_SDRAMHTC_EBIDATA_DCSR  | \
-					 FTPMU010_SDRAMHTC_SDRAMCS_DCSR  | \
-					 FTPMU010_SDRAMHTC_SDRAMCTL_DCSR | \
-					 FTPMU010_SDRAMHTC_CKE_DCSR	 | \
-					 FTPMU010_SDRAMHTC_DQM_DCSR	 | \
-					 FTPMU010_SDRAMHTC_SDCLK_DCSR)
-#endif
-
-/*
- * SDRAM controller configuration
- */
-#define CONFIG_FTSDMC021
-
-#ifdef CONFIG_FTSDMC021
-#include <faraday/ftsdmc021.h>
-
-#define CONFIG_SYS_FTSDMC021_TP1	(FTSDMC021_TP1_TRP(1)	|	\
-					 FTSDMC021_TP1_TRCD(1)	|	\
-					 FTSDMC021_TP1_TRF(3)	|	\
-					 FTSDMC021_TP1_TWR(1)	|	\
-					 FTSDMC021_TP1_TCL(2))
-
-#define CONFIG_SYS_FTSDMC021_TP2	(FTSDMC021_TP2_INI_PREC(4) |	\
-					 FTSDMC021_TP2_INI_REFT(8) |	\
-					 FTSDMC021_TP2_REF_INTV(0x180))
-
-/*
- * CONFIG_SYS_FTSDMC021_CR1: this define is used in lowlevel_init.S,
- * hence we cannot use FTSDMC021_BANK_SIZE(64) since it will use ffs() wrote in
- * C language.
- */
-#define CONFIG_SYS_FTSDMC021_CR1	(FTSDMC021_CR1_DDW(2)	 |	\
-					 FTSDMC021_CR1_DSZ(3)	 |	\
-					 FTSDMC021_CR1_MBW(2)	 |	\
-					 FTSDMC021_CR1_BNKSIZE(6))
-
-#define CONFIG_SYS_FTSDMC021_CR2	(FTSDMC021_CR2_IPREC	 |	\
-					 FTSDMC021_CR2_IREF	 |	\
-					 FTSDMC021_CR2_ISMR)
-
-#define CONFIG_SYS_FTSDMC021_BANK0_BASE	CONFIG_SYS_FTAHBC020S_SLAVE_BSR_BASE
-#define CONFIG_SYS_FTSDMC021_BANK0_BSR	(FTSDMC021_BANK_ENABLE	 |	\
-					 CONFIG_SYS_FTSDMC021_BANK0_BASE)
-
-#define CONFIG_SYS_FTSDMC021_BANK1_BASE \
-	(CONFIG_SYS_FTAHBC020S_SLAVE_BSR_BASE + (PHYS_SDRAM_0_SIZE >> 20))
-#define CONFIG_SYS_FTSDMC021_BANK1_BSR (FTSDMC021_BANK_ENABLE   |      \
-		CONFIG_SYS_FTSDMC021_BANK1_BASE)
-
-#endif
-
-/*
- * Physical Memory Map
- */
-#if defined(CONFIG_MEM_REMAP) || defined(CONFIG_SKIP_LOWLEVEL_INIT)
-#define PHYS_SDRAM_0		0x00000000	/* SDRAM Bank #1 */
-#if defined(CONFIG_MEM_REMAP)
-#define PHYS_SDRAM_0_AT_INIT	0x10000000	/* SDRAM Bank #1 before remap*/
-#endif
-#else	/* !CONFIG_SKIP_LOWLEVEL_INIT && !CONFIG_MEM_REMAP */
-#define PHYS_SDRAM_0		0x10000000	/* SDRAM Bank #1 */
-#endif
-#define PHYS_SDRAM_1 \
-	(PHYS_SDRAM_0 + PHYS_SDRAM_0_SIZE)	/* SDRAM Bank #2 */
-
-#define CONFIG_NR_DRAM_BANKS	2		/* we have 2 bank of DRAM */
-#define PHYS_SDRAM_0_SIZE	0x04000000	/* 64 MB */
-#define PHYS_SDRAM_1_SIZE	0x04000000	/* 64 MB */
-
-#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_0
-
-#ifdef CONFIG_MEM_REMAP
-#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_SDRAM_BASE + 0xA0000 - \
-					GENERATED_GBL_DATA_SIZE)
-#else
-#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x1000 - \
-					GENERATED_GBL_DATA_SIZE)
-#endif /* CONFIG_MEM_REMAP */
-
-/*
- * Load address and memory test area should agree with
- * arch/nds32/config.mk. Be careful not to overwrite U-boot itself.
- */
-#define CONFIG_SYS_LOAD_ADDR		0x300000
-
-/* memtest works on 63 MB in DRAM */
-#define CONFIG_SYS_MEMTEST_START	PHYS_SDRAM_0
-#define CONFIG_SYS_MEMTEST_END		(PHYS_SDRAM_0 + 0x03F00000)
-
-/*
- * Static memory controller configuration
- */
-#define CONFIG_FTSMC020
-
-#ifdef CONFIG_FTSMC020
-#include <faraday/ftsmc020.h>
-
-#ifdef CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_SYS_FTSMC020_CONFIGS	{			\
-	{ FTSMC020_BANK0_CONFIG, FTSMC020_BANK0_TIMING, },	\
-	{ FTSMC020_BANK1_CONFIG, FTSMC020_BANK1_TIMING, },	\
-}
-#else
-#define CONFIG_SYS_FTSMC020_CONFIGS	{			\
-	{ FTSMC020_BANK1_CONFIG, FTSMC020_BANK1_TIMING, },	\
-}
-#endif
-
-/*
- * There are 2 bank connected to FTSMC020 on ADP-AG101.
- * You can use jumper and switch to force it booted from ROM or FLASH.
- * MA17: Lo, SW5 = "0101": BANK0: ROM, BANK1: FLASH.
- * MA17: Hi, SW5 = "1010": BANK0: FLASH; ROM is disabled.
- */
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT	/* FLASH is on BANK 0 */
-#define FTSMC020_BANK0_LOWLV_CONFIG	(FTSMC020_BANK_ENABLE	|	\
-					 FTSMC020_BANK_SIZE_32M	|	\
-					 FTSMC020_BANK_MBW_32)
-
-#define FTSMC020_BANK0_LOWLV_TIMING	(FTSMC020_TPR_RBE	|	\
-					 FTSMC020_TPR_AST(1)	|	\
-					 FTSMC020_TPR_CTW(1)	|	\
-					 FTSMC020_TPR_ATI(1)	|	\
-					 FTSMC020_TPR_AT2(1)	|	\
-					 FTSMC020_TPR_WTC(1)	|	\
-					 FTSMC020_TPR_AHT(1)	|	\
-					 FTSMC020_TPR_TRNA(1))
-#endif
-
-/*
- * This FTSMC020_BANK0_CONFIG indecates the setting of BANK0.
- * 1. When CONFIG_SKIP_LOWLEVEL_INIT is enabled, BANK0 is EEPROM,
- *    Do NOT enable BANK0 in FTSMC020_BANK0_CONFIG under this condition.
- * 2. When CONFIG_SKIP_LOWLEVEL_INIT is undefined, BANK0 is FLASH.
- */
-#define FTSMC020_BANK0_CONFIG	(FTSMC020_BANK_SIZE_32M           |	\
-				 FTSMC020_BANK_MBW_32)
-
-#define FTSMC020_BANK0_TIMING	(FTSMC020_TPR_RBE      |	\
-				 FTSMC020_TPR_AST(3)   |	\
-				 FTSMC020_TPR_CTW(3)   |	\
-				 FTSMC020_TPR_ATI(0xf) |	\
-				 FTSMC020_TPR_AT2(3)   |	\
-				 FTSMC020_TPR_WTC(3)   |	\
-				 FTSMC020_TPR_AHT(3)   |	\
-				 FTSMC020_TPR_TRNA(0xf))
-
-#define FTSMC020_BANK1_CONFIG	(FTSMC020_BANK_ENABLE	|	\
-				 FTSMC020_BANK_BASE(PHYS_FLASH_1) |	\
-				 FTSMC020_BANK_SIZE_32M	|	\
-				 FTSMC020_BANK_MBW_32)
-
-#define FTSMC020_BANK1_TIMING	(FTSMC020_TPR_RBE	|	\
-				 FTSMC020_TPR_AST(1)	|	\
-				 FTSMC020_TPR_CTW(1)	|	\
-				 FTSMC020_TPR_ATI(1)	|	\
-				 FTSMC020_TPR_AT2(1)	|	\
-				 FTSMC020_TPR_WTC(1)	|	\
-				 FTSMC020_TPR_AHT(1)	|	\
-				 FTSMC020_TPR_TRNA(1))
-#endif /* CONFIG_FTSMC020 */
-
-/*
- * FLASH and environment organization
- */
-/* use CFI framework */
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_FLASH_CFI_DRIVER
-
-#define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
-
-/* support JEDEC */
-
-/* Do not use CONFIG_FLASH_CFI_LEGACY to detect on board flash */
-#ifdef CONFIG_SKIP_LOWLEVEL_INIT
-#define PHYS_FLASH_1			0x80400000	/* BANK 1 */
-#else	/* !CONFIG_SKIP_LOWLEVEL_INIT */
-#ifdef CONFIG_MEM_REMAP
-#define PHYS_FLASH_1			0x80000000	/* BANK 0 */
-#else
-#define PHYS_FLASH_1			0x00000000	/* BANK 0 */
-#endif	/* CONFIG_MEM_REMAP */
-#endif	/* CONFIG_SKIP_LOWLEVEL_INIT */
-
-#define CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1
-#define CONFIG_SYS_FLASH_BANKS_LIST	{ PHYS_FLASH_1, }
-#define CONFIG_SYS_MONITOR_BASE		PHYS_FLASH_1
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* TO for Flash Erase (ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* TO for Flash Write (ms) */
-
-/* max number of memory banks */
-/*
- * There are 4 banks supported for this Controller,
- * but we have only 1 bank connected to flash on board
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS	1
-
-/* max number of sectors on one chip */
-#define CONFIG_FLASH_SECTOR_SIZE	(0x10000*2*2)
-#define CONFIG_ENV_SECT_SIZE		CONFIG_FLASH_SECTOR_SIZE
-#define CONFIG_SYS_MAX_FLASH_SECT	128
-
-/* environments */
-#define CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_ENV_ADDR			(CONFIG_SYS_MONITOR_BASE + 0x40000)
-#define CONFIG_ENV_SIZE			8192
-#define CONFIG_ENV_OVERWRITE
-
-#endif	/* __CONFIG_H */
diff --git a/include/configs/adp-ag102.h b/include/configs/adp-ag102.h
deleted file mode 100644
index 6f05d87..0000000
--- a/include/configs/adp-ag102.h
+++ /dev/null
@@ -1,334 +0,0 @@
-/*
- * Copyright (C) 2011 Andes Technology Corporation
- * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#include <asm/arch-ag102/ag102.h>
-
-/*
- * CPU and Board Configuration Options
- */
-#define CONFIG_ADP_AG102
-
-#define CONFIG_USE_INTERRUPT
-
-#define CONFIG_SKIP_LOWLEVEL_INIT
-
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_MEM_REMAP
-#endif
-
-#ifdef CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_SYS_TEXT_BASE	0x04200000
-#else
-#define CONFIG_SYS_TEXT_BASE	0x00000000
-#endif
-
-/*
- * Timer
- */
-#define CONFIG_SYS_CLK_FREQ	(66000000 * 2)
-#define VERSION_CLOCK		CONFIG_SYS_CLK_FREQ
-
-/*
- * Use Externel CLOCK or PCLK
- */
-#undef CONFIG_FTRTC010_EXTCLK
-
-#ifndef CONFIG_FTRTC010_EXTCLK
-#define CONFIG_FTRTC010_PCLK
-#endif
-
-#ifdef CONFIG_FTRTC010_EXTCLK
-#define TIMER_CLOCK	32768			/* CONFIG_FTRTC010_EXTCLK */
-#else
-#define TIMER_CLOCK	CONFIG_SYS_HZ		/* CONFIG_FTRTC010_PCLK */
-#endif
-
-#define TIMER_LOAD_VAL	0xffffffff
-
-/*
- * Real Time Clock
- */
-#define CONFIG_RTC_FTRTC010
-
-/*
- * Real Time Clock Divider
- * RTC_DIV_COUNT			(OSC_CLK/OSC_5MHZ)
- */
-#define OSC_5MHZ			(5*1000000)
-#define OSC_CLK				(2*OSC_5MHZ)
-#define RTC_DIV_COUNT			(OSC_CLK/OSC_5MHZ)
-
-/*
- * Serial console configuration
- */
-
-/* FTUART is a high speed NS 16C550A compatible UART */
-#define CONFIG_BAUDRATE			38400
-#define CONFIG_CONS_INDEX		1
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_COM1		CONFIG_FTUART010_01_BASE
-#define CONFIG_SYS_NS16550_REG_SIZE	-4
-#define CONFIG_SYS_NS16550_CLK		33000000	/* AG102 */
-
-/*
- * Ethernet
- */
-#define CONFIG_PHY_MAX_ADDR	32	/* this comes from <linux/phy.h> */
-#define CONFIG_SYS_DISCOVER_PHY
-#define CONFIG_FTGMAC100
-#define CONFIG_FTGMAC100_EGIGA
-
-#define CONFIG_BOOTDELAY	3
-
-/*
- * SD (MMC) controller
- */
-#define CONFIG_MMC
-#define CONFIG_CMD_MMC
-#define CONFIG_GENERIC_MMC
-#define CONFIG_DOS_PARTITION
-#define CONFIG_FTSDC010
-#define CONFIG_FTSDC010_NUMBER		1
-#define CONFIG_FTSDC010_SDIO
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_EXT2
-
-/*
- * Command line configuration.
- */
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_IDE
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_ELF
-
-
-/*
- * PCI
- */
-#define CONFIG_PCI
-#define CONFIG_FTPCI100
-#define CONFIG_PCI_INDIRECT_BRIDGE
-#define CONFIG_FTPCI100_MEM_BASE        0xa0000000
-#define CONFIG_FTPCI100_IO_SIZE         FTPCI100_BASE_IO_SIZE(256) /* 256M */
-#define CONFIG_FTPCI100_MEM_SIZE        FTPCI100_MEM_SIZE(128)  /* 128M */
-#define CONFIG_FTPCI100_MEM_BASE_SIZE1  0x50
-
-#define CONFIG_PCI_MEM_BUS	0xa0000000
-#define CONFIG_PCI_MEM_PHYS	CONFIG_PCI_MEM_BUS
-#define CONFIG_PCI_MEM_SIZE	0x01000000		/* 256M */
-
-#define CONFIG_PCI_IO_BUS	0x90000000
-#define CONFIG_PCI_IO_PHYS	CONFIG_PCI_IO_BUS
-#define CONFIG_PCI_IO_SIZE	0x00100000		/* 1M */
-
-/*
- * USB
- */
-#if defined(CONFIG_CMD_PCI) || defined(CONFIG_PCI)
-#if defined(CONFIG_FTPCI100)
-#define __io /* enable outl & inl */
-#define CONFIG_CMD_USB
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS      5
-#define CONFIG_USB_STORAGE
-#define CONFIG_USB_EHCI
-#define CONFIG_PCI_EHCI_DEVICE 0
-#define CONFIG_USB_EHCI_PCI
-#define CONFIG_PREBOOT                          "usb start;"
-#endif /* #if defiend(CONFIG_FTPCI100) */
-#endif /* #if defined(CONFIG_CMD_PCI) || defined(CONFIG_PCI) */
-
-/*
- * IDE/ATA stuff
- */
-#define __io
-#define CONFIG_IDE_AHB
-#define CONFIG_IDE_FTIDE020
-
-#undef	CONFIG_IDE_8xx_DIRECT		/* no pcmcia interface required */
-#undef	CONFIG_IDE_LED			/* no led for ide supported	*/
-#define CONFIG_IDE_RESET	1	/* reset for ide supported	*/
-#define CONFIG_IDE_PREINIT	1	/* preinit for ide		*/
-
-/* max: 2 IDE busses */
-#define CONFIG_SYS_IDE_MAXBUS		1	/* origin: 2 */
-/* max: 2 drives per IDE bus */
-#define CONFIG_SYS_IDE_MAXDEVICE	1	/* origin: (MAXBUS * 2) */
-
-#define CONFIG_SYS_ATA_BASE_ADDR	CONFIG_FTIDE020S_BASE
-#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
-#define CONFIG_SYS_ATA_IDE1_OFFSET	0x0000
-
-#define CONFIG_SYS_ATA_DATA_OFFSET	0x0000	/* for data I/O */
-#define CONFIG_SYS_ATA_REG_OFFSET	0x0000	/* for normal regs access */
-#define CONFIG_SYS_ATA_ALT_OFFSET	0x0000	/* for alternate regs */
-
-#define CONFIG_MAC_PARTITION
-#define CONFIG_DOS_PARTITION
-#define CONFIG_SUPPORT_VFAT
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP			/* undef to save memory */
-#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size */
-
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE	\
-	(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-
-/* max number of command args */
-#define CONFIG_SYS_MAXARGS	16
-
-/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 128 * 1024)
-
-/*
- * AHB Controller configuration
- */
-#define CONFIG_FTAHBC020S
-
-#ifdef CONFIG_FTAHBC020S
-#include <faraday/ftahbc020s.h>
-
-/* Address of PHYS_SDRAM_0 before memory remap is at 0x(100)00000 */
-#define CONFIG_SYS_FTAHBC020S_SLAVE_BSR_BASE	0x100
-
-/*
- * CONFIG_SYS_FTAHBC020S_SLAVE_BSR_6: this define is used in lowlevel_init.S,
- * hence we cannot use FTAHBC020S_BSR_SIZE(2048) since it will use ffs() wrote
- * in C language.
- */
-#define CONFIG_SYS_FTAHBC020S_SLAVE_BSR_6 \
-	(FTAHBC020S_SLAVE_BSR_BASE(CONFIG_SYS_FTAHBC020S_SLAVE_BSR_BASE) | \
-					 FTAHBC020S_SLAVE_BSR_SIZE(0xb))
-#endif
-
-/*
- * Watchdog
- */
-#define CONFIG_FTWDT010_WATCHDOG
-
-/*
- * PCU Power Control Unit configuration
- */
-#define CONFIG_ANDES_PCU
-
-#ifdef CONFIG_ANDES_PCU
-#include <andestech/andes_pcu.h>
-
-#endif
-
-/*
- * DDR DRAM controller configuration
- */
-#define CONFIG_DWCDDR21MCTL
-
-#ifdef CONFIG_DWCDDR21MCTL
-#include <synopsys/dwcddr21mctl.h>
-/* DCR:
- *   2GB: 0x000025d2, 2GB (1Gb x8 2 ranks) Micron/innoDisk/Transcend
- *   1GB: 0x000021d2, 1GB (1Gb x8 1 rank) Micron/Transcend/innoDisk
- * 512MB: 0x000025cc, Micron 512MB (512Mb x16 2 ranks)
- * 512MB: 0x000021ca, Trenscend/innoDisk 512MB (512Mb x8 1 rank)
- * 256MB: 0x000020d4, Micron 256MB (1Gb x16 1 ranks)
- */
-#define CONFIG_SYS_DWCDDR21MCTL_CCR	0x00020004
-#define CONFIG_SYS_DWCDDR21MCTL_CCR2	(DWCDDR21MCTL_CCR_DTT(0x1)	| \
-					DWCDDR21MCTL_CCR_DFTLM(0x4)	| \
-					DWCDDR21MCTL_CCR_HOSTEN(0x1))
-
-/* 0x04: 0x000020d4 */
-#define CONFIG_SYS_DWCDDR21MCTL_DCR	0x000020ca
-
-/* 0x08: 0x0000000f */
-#define CONFIG_SYS_DWCDDR21MCTL_IOCR	0x0000000f
-
-/* 0x10: 0x00034812 */
-#define CONFIG_SYS_DWCDDR21MCTL_DRR	(DWCDDR21MCTL_DRR_TRFC(0x12)	| \
-					DWCDDR21MCTL_DRR_TRFPRD(0x0348))
-/* 0x24 */
-#define CONFIG_SYS_DWCDDR21MCTL_DLLCR0	DWCDDR21MCTL_DLLCR_PHASE(0x0)
-
-/* 0x4c: 0x00000040 */
-#define CONFIG_SYS_DWCDDR21MCTL_RSLR0	0x00000040
-
-/* 0x5c: 0x000055CF */
-#define CONFIG_SYS_DWCDDR21MCTL_RDGR0	0x000055cf
-
-/* 0xa4: 0x00100000 */
-#define CONFIG_SYS_DWCDDR21MCTL_DTAR	(DWCDDR21MCTL_DTAR_DTBANK(0x0)	| \
-					DWCDDR21MCTL_DTAR_DTROW(0x0100)	| \
-					DWCDDR21MCTL_DTAR_DTCOL(0x0))
-/* 0x1f0: 0x00000852 */
-#define CONFIG_SYS_DWCDDR21MCTL_MR	(DWCDDR21MCTL_MR_WR(0x4)	| \
-					DWCDDR21MCTL_MR_CL(0x5)		| \
-					DWCDDR21MCTL_MR_BL(0x2))
-#endif
-
-/*
- * Physical Memory Map
- */
-#if defined(CONFIG_MEM_REMAP) || defined(CONFIG_SKIP_LOWLEVEL_INIT)
-#define PHYS_SDRAM_0		0x00000000	/* SDRAM Bank #1 */
-#if defined(CONFIG_MEM_REMAP)
-#define PHYS_SDRAM_0_AT_INIT	0x80000000	/* SDRAM Bank #1 before remap*/
-#endif
-#else	/* !CONFIG_SKIP_LOWLEVEL_INIT && !CONFIG_MEM_REMAP */
-#define PHYS_SDRAM_0		0x80000000	/* SDRAM Bank #1 */
-#endif
-
-#define CONFIG_NR_DRAM_BANKS	1		/* we have 1 bank of DRAM */
-#define PHYS_SDRAM_0_SIZE	0x10000000	/* 256 MB */
-
-#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_0
-
-#ifdef CONFIG_MEM_REMAP
-#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_SDRAM_BASE + 0xA0000 - \
-					GENERATED_GBL_DATA_SIZE)
-#else
-#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x1000 - \
-					GENERATED_GBL_DATA_SIZE)
-#endif /* CONFIG_MEM_REMAP */
-
-/*
- * Load address and memory test area should agree with
- * board/faraday/a320/config.mk
- * Be careful not to overwrite U-boot itself.
- */
-#define CONFIG_SYS_LOAD_ADDR		0x0CF00000
-
-/* memtest works on 63 MB in DRAM */
-#define CONFIG_SYS_MEMTEST_START	PHYS_SDRAM_0
-#define CONFIG_SYS_MEMTEST_END		(PHYS_SDRAM_0 + 0x03F00000)
-
-/*
- * Static memory controller configuration
- */
-
-/*
- * FLASH and environment organization
- */
-#define CONFIG_SYS_NO_FLASH
-
-/*
- * Env Storage Settings
- */
-#define CONFIG_ENV_IS_NOWHERE
-#define CONFIG_ENV_SIZE			4096
-
-#endif	/* __CONFIG_H */