summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorYoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>2011-10-11 09:10:14 (GMT)
committerNobuhiro Iwamatsu <iwamatsu@nigauri.org>2011-12-02 04:46:20 (GMT)
commitbd1024b052be8c9604b6bc101d5e147f9f280f00 (patch)
tree6d1f85ec13a982e2dde6246c29fa90a12d92ac6e
parent7708d8b352e9e595f6f08afd3206af6495c7dc09 (diff)
downloadu-boot-bd1024b052be8c9604b6bc101d5e147f9f280f00.tar.xz
net: sh_eth: use miiphybb instead of own mii functions
The sh_eth driver had an own mii functions. However the function didn't support the gigabit PHY. The U-Boot has the general phy driver and miiphybb driver, and they already support it. So this patch removes the own functions and uses the phy driver. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
-rw-r--r--drivers/net/sh_eth.c293
-rw-r--r--drivers/net/sh_eth.h59
2 files changed, 104 insertions, 248 deletions
diff --git a/drivers/net/sh_eth.c b/drivers/net/sh_eth.c
index 17dd0d2..27d0401 100644
--- a/drivers/net/sh_eth.c
+++ b/drivers/net/sh_eth.c
@@ -25,6 +25,7 @@
#include <malloc.h>
#include <net.h>
#include <netdev.h>
+#include <miiphy.h>
#include <asm/errno.h>
#include <asm/io.h>
@@ -45,144 +46,6 @@
#define SH_ETH_PHY_DELAY 50000
-/*
- * Bits are written to the PHY serially using the
- * PIR register, just like a bit banger.
- */
-static void sh_eth_mii_write_phy_bits(int port, u32 val, int len)
-{
- int i;
- u32 pir;
-
- /* Bit positions is 1 less than the number of bits */
- for (i = len - 1; i >= 0; i--) {
- /* Write direction, bit to write, clock is low */
- pir = 2 | ((val & 1 << i) ? 1 << 2 : 0);
- outl(pir, PIR(port));
- udelay(1);
- /* Write direction, bit to write, clock is high */
- pir = 3 | ((val & 1 << i) ? 1 << 2 : 0);
- outl(pir, PIR(port));
- udelay(1);
- /* Write direction, bit to write, clock is low */
- pir = 2 | ((val & 1 << i) ? 1 << 2 : 0);
- outl(pir, PIR(port));
- udelay(1);
- }
-}
-
-static void sh_eth_mii_bus_release(int port)
-{
- /* Read direction, clock is low */
- outl(0, PIR(port));
- udelay(1);
- /* Read direction, clock is high */
- outl(1, PIR(port));
- udelay(1);
- /* Read direction, clock is low */
- outl(0, PIR(port));
- udelay(1);
-}
-
-static void sh_eth_mii_ind_bus_release(int port)
-{
- /* Read direction, clock is low */
- outl(0, PIR(port));
- udelay(1);
-}
-
-static void sh_eth_mii_read_phy_bits(int port, u32 *val, int len)
-{
- int i;
- u32 pir;
-
- *val = 0;
- for (i = len - 1; i >= 0; i--) {
- /* Read direction, clock is high */
- outl(1, PIR(port));
- udelay(1);
- /* Read bit */
- pir = inl(PIR(port));
- *val |= (pir & 8) ? 1 << i : 0;
- /* Read direction, clock is low */
- outl(0, PIR(port));
- udelay(1);
- }
-}
-
-#define PHY_INIT 0xFFFFFFFF
-#define PHY_READ 0x02
-#define PHY_WRITE 0x01
-/*
- * To read a phy register, mii managements frames are sent to the phy.
- * The frames look like this:
- * pre (32 bits): 0xffff ffff
- * st (2 bits): 01
- * op (2bits): 10: read 01: write
- * phyad (5 bits): xxxxx
- * regad (5 bits): xxxxx
- * ta (Bus release):
- * data (16 bits): read data
- */
-static u32 sh_eth_mii_read_phy_reg(int port, u8 phy_addr, int reg)
-{
- u32 val;
-
- /* Sent mii management frame */
- /* pre */
- sh_eth_mii_write_phy_bits(port, PHY_INIT, 32);
- /* st (start of frame) */
- sh_eth_mii_write_phy_bits(port, 0x1, 2);
- /* op (code) */
- sh_eth_mii_write_phy_bits(port, PHY_READ, 2);
- /* phy address */
- sh_eth_mii_write_phy_bits(port, phy_addr, 5);
- /* Register to read */
- sh_eth_mii_write_phy_bits(port, reg, 5);
-
- /* Bus release */
- sh_eth_mii_bus_release(port);
-
- /* Read register */
- sh_eth_mii_read_phy_bits(port, &val, 16);
-
- return val;
-}
-
-/*
- * To write a phy register, mii managements frames are sent to the phy.
- * The frames look like this:
- * pre (32 bits): 0xffff ffff
- * st (2 bits): 01
- * op (2bits): 10: read 01: write
- * phyad (5 bits): xxxxx
- * regad (5 bits): xxxxx
- * ta (2 bits): 10
- * data (16 bits): write data
- * idle (Independent bus release)
- */
-static void sh_eth_mii_write_phy_reg(int port, u8 phy_addr, int reg, u16 val)
-{
- /* Sent mii management frame */
- /* pre */
- sh_eth_mii_write_phy_bits(port, PHY_INIT, 32);
- /* st (start of frame) */
- sh_eth_mii_write_phy_bits(port, 0x1, 2);
- /* op (code) */
- sh_eth_mii_write_phy_bits(port, PHY_WRITE, 2);
- /* phy address */
- sh_eth_mii_write_phy_bits(port, phy_addr, 5);
- /* Register to read */
- sh_eth_mii_write_phy_bits(port, reg, 5);
- /* ta */
- sh_eth_mii_write_phy_bits(port, PHY_READ, 2);
- /* Write register data */
- sh_eth_mii_write_phy_bits(port, val, 16);
-
- /* Independent bus release */
- sh_eth_mii_ind_bus_release(port);
-}
-
int sh_eth_send(struct eth_device *dev, volatile void *packet, int len)
{
struct sh_eth_dev *eth = dev->priv;
@@ -480,62 +343,26 @@ err_tx_init:
static int sh_eth_phy_config(struct sh_eth_dev *eth)
{
- int port = eth->port, timeout, ret = 0;
+ int port = eth->port, ret = 0;
struct sh_eth_info *port_info = &eth->port_info[port];
- u32 val;
-
- /* Reset phy */
- sh_eth_mii_write_phy_reg
- (port, port_info->phy_addr, PHY_CTRL, PHY_C_RESET);
- timeout = 10;
- while (timeout--) {
- val = sh_eth_mii_read_phy_reg(port,
- port_info->phy_addr, PHY_CTRL);
- if (!(val & PHY_C_RESET))
- break;
- udelay(SH_ETH_PHY_DELAY);
- }
-
- if (timeout < 0) {
- printf(SHETHER_NAME ": phy reset timeout\n");
- ret = -EIO;
- goto err_tout;
- }
-
- /* Advertise 100/10 baseT full/half duplex */
- sh_eth_mii_write_phy_reg(port, port_info->phy_addr, PHY_ANA,
- (PHY_A_FDX|PHY_A_HDX|PHY_A_10FDX|PHY_A_10HDX|PHY_A_EXT));
- /* Autonegotiation, normal operation, full duplex, enable tx */
- sh_eth_mii_write_phy_reg(port, port_info->phy_addr, PHY_CTRL,
- (PHY_C_ANEGEN|PHY_C_RANEG));
- /* Wait for autonegotiation to complete */
- timeout = 100;
- while (timeout--) {
- val = sh_eth_mii_read_phy_reg(port, port_info->phy_addr, 1);
- if (val & PHY_S_ANEGC)
- break;
-
- udelay(SH_ETH_PHY_DELAY);
- }
-
- if (timeout < 0) {
- printf(SHETHER_NAME ": phy auto-negotiation failed\n");
- ret = -ETIMEDOUT;
- goto err_tout;
- }
+ struct eth_device *dev = port_info->dev;
+ struct phy_device *phydev;
- return ret;
+ phydev = phy_connect(miiphy_get_dev_by_name(dev->name),
+ port_info->phy_addr, dev, PHY_INTERFACE_MODE_MII);
+ port_info->phydev = phydev;
+ phy_config(phydev);
-err_tout:
return ret;
}
static int sh_eth_config(struct sh_eth_dev *eth, bd_t *bd)
{
int port = eth->port, ret = 0;
- u32 val, phy_status;
+ u32 val;
struct sh_eth_info *port_info = &eth->port_info[port];
struct eth_device *dev = port_info->dev;
+ struct phy_device *phy;
/* Configure e-dmac registers */
outl((inl(EDMR(port)) & ~EMDR_DESC_R) | EDMR_EL, EDMR(port));
@@ -582,31 +409,31 @@ static int sh_eth_config(struct sh_eth_dev *eth, bd_t *bd)
printf(SHETHER_NAME ": phy config timeout\n");
goto err_phy_cfg;
}
- /* Read phy status to finish configuring the e-mac */
- phy_status = sh_eth_mii_read_phy_reg(port, port_info->phy_addr, 1);
+ phy = port_info->phydev;
+ phy_startup(phy);
/* Set the transfer speed */
#ifdef CONFIG_CPU_SH7763
- if (phy_status & (PHY_S_100X_F|PHY_S_100X_H)) {
+ if (phy->speed == 100) {
printf(SHETHER_NAME ": 100Base/");
outl(GECMR_100B, GECMR(port));
- } else {
+ } else if (phy->speed == 10) {
printf(SHETHER_NAME ": 10Base/");
outl(GECMR_10B, GECMR(port));
}
#endif
#if defined(CONFIG_CPU_SH7757)
- if (phy_status & (PHY_S_100X_F|PHY_S_100X_H)) {
+ if (phy->speed == 100) {
printf("100Base/");
outl(1, RTRATE(port));
- } else {
+ } else if (phy->speed == 10) {
printf("10Base/");
outl(0, RTRATE(port));
}
#endif
/* Check if full duplex mode is supported by the phy */
- if (phy_status & (PHY_S_100X_F|PHY_S_10T_F)) {
+ if (phy->duplex) {
printf("Full\n");
outl((ECMR_CHG_DM|ECMR_RE|ECMR_TE|ECMR_DM), ECMR(port));
} else {
@@ -707,6 +534,9 @@ int sh_eth_initialize(bd_t *bd)
/* Register Device to EtherNet subsystem */
eth_register(dev);
+ bb_miiphy_buses[0].priv = eth;
+ miiphy_register(dev->name, bb_miiphy_read, bb_miiphy_write);
+
if (!eth_getenv_enetaddr("ethaddr", dev->enetaddr))
puts("Please set MAC address\n");
@@ -722,3 +552,86 @@ err:
printf(SHETHER_NAME ": Failed\n");
return ret;
}
+
+/******* for bb_miiphy *******/
+static int sh_eth_bb_init(struct bb_miiphy_bus *bus)
+{
+ return 0;
+}
+
+static int sh_eth_bb_mdio_active(struct bb_miiphy_bus *bus)
+{
+ struct sh_eth_dev *eth = bus->priv;
+ int port = eth->port;
+
+ outl(inl(PIR(port)) | PIR_MMD, PIR(port));
+
+ return 0;
+}
+
+static int sh_eth_bb_mdio_tristate(struct bb_miiphy_bus *bus)
+{
+ struct sh_eth_dev *eth = bus->priv;
+ int port = eth->port;
+
+ outl(inl(PIR(port)) & ~PIR_MMD, PIR(port));
+
+ return 0;
+}
+
+static int sh_eth_bb_set_mdio(struct bb_miiphy_bus *bus, int v)
+{
+ struct sh_eth_dev *eth = bus->priv;
+ int port = eth->port;
+
+ if (v)
+ outl(inl(PIR(port)) | PIR_MDO, PIR(port));
+ else
+ outl(inl(PIR(port)) & ~PIR_MDO, PIR(port));
+
+ return 0;
+}
+
+static int sh_eth_bb_get_mdio(struct bb_miiphy_bus *bus, int *v)
+{
+ struct sh_eth_dev *eth = bus->priv;
+ int port = eth->port;
+
+ *v = (inl(PIR(port)) & PIR_MDI) >> 3;
+
+ return 0;
+}
+
+static int sh_eth_bb_set_mdc(struct bb_miiphy_bus *bus, int v)
+{
+ struct sh_eth_dev *eth = bus->priv;
+ int port = eth->port;
+
+ if (v)
+ outl(inl(PIR(port)) | PIR_MDC, PIR(port));
+ else
+ outl(inl(PIR(port)) & ~PIR_MDC, PIR(port));
+
+ return 0;
+}
+
+static int sh_eth_bb_delay(struct bb_miiphy_bus *bus)
+{
+ udelay(10);
+
+ return 0;
+}
+
+struct bb_miiphy_bus bb_miiphy_buses[] = {
+ {
+ .name = "sh_eth",
+ .init = sh_eth_bb_init,
+ .mdio_active = sh_eth_bb_mdio_active,
+ .mdio_tristate = sh_eth_bb_mdio_tristate,
+ .set_mdio = sh_eth_bb_set_mdio,
+ .get_mdio = sh_eth_bb_get_mdio,
+ .set_mdc = sh_eth_bb_set_mdc,
+ .delay = sh_eth_bb_delay,
+ }
+};
+int bb_miiphy_buses_num = ARRAY_SIZE(bb_miiphy_buses);
diff --git a/drivers/net/sh_eth.h b/drivers/net/sh_eth.h
index 51e5d5b..dd6a422 100644
--- a/drivers/net/sh_eth.h
+++ b/drivers/net/sh_eth.h
@@ -89,6 +89,7 @@ struct sh_eth_info {
u8 mac_addr[6];
u8 phy_addr;
struct eth_device *dev;
+ struct phy_device *phydev;
};
struct sh_eth_dev {
@@ -435,61 +436,3 @@ enum FIFO_SIZE_BIT {
FIFO_SIZE_T = 0x00000700, FIFO_SIZE_R = 0x00000007,
};
-enum PHY_OFFSETS {
- PHY_CTRL = 0, PHY_STAT = 1, PHY_IDT1 = 2, PHY_IDT2 = 3,
- PHY_ANA = 4, PHY_ANL = 5, PHY_ANE = 6,
- PHY_16 = 16,
-};
-
-/* PHY_CTRL */
-enum PHY_CTRL_BIT {
- PHY_C_RESET = 0x8000, PHY_C_LOOPBK = 0x4000, PHY_C_SPEEDSL = 0x2000,
- PHY_C_ANEGEN = 0x1000, PHY_C_PWRDN = 0x0800, PHY_C_ISO = 0x0400,
- PHY_C_RANEG = 0x0200, PHY_C_DUPLEX = 0x0100, PHY_C_COLT = 0x0080,
-};
-#define DM9161_PHY_C_ANEGEN 0 /* auto nego special */
-
-/* PHY_STAT */
-enum PHY_STAT_BIT {
- PHY_S_100T4 = 0x8000, PHY_S_100X_F = 0x4000, PHY_S_100X_H = 0x2000,
- PHY_S_10T_F = 0x1000, PHY_S_10T_H = 0x0800, PHY_S_ANEGC = 0x0020,
- PHY_S_RFAULT = 0x0010, PHY_S_ANEGA = 0x0008, PHY_S_LINK = 0x0004,
- PHY_S_JAB = 0x0002, PHY_S_EXTD = 0x0001,
-};
-
-/* PHY_ANA */
-enum PHY_ANA_BIT {
- PHY_A_NP = 0x8000, PHY_A_ACK = 0x4000, PHY_A_RF = 0x2000,
- PHY_A_FCS = 0x0400, PHY_A_T4 = 0x0200, PHY_A_FDX = 0x0100,
- PHY_A_HDX = 0x0080, PHY_A_10FDX = 0x0040, PHY_A_10HDX = 0x0020,
- PHY_A_SEL = 0x001e,
- PHY_A_EXT = 0x0001,
-};
-
-/* PHY_ANL */
-enum PHY_ANL_BIT {
- PHY_L_NP = 0x8000, PHY_L_ACK = 0x4000, PHY_L_RF = 0x2000,
- PHY_L_FCS = 0x0400, PHY_L_T4 = 0x0200, PHY_L_FDX = 0x0100,
- PHY_L_HDX = 0x0080, PHY_L_10FDX = 0x0040, PHY_L_10HDX = 0x0020,
- PHY_L_SEL = 0x001f,
-};
-
-/* PHY_ANE */
-enum PHY_ANE_BIT {
- PHY_E_PDF = 0x0010, PHY_E_LPNPA = 0x0008, PHY_E_NPA = 0x0004,
- PHY_E_PRX = 0x0002, PHY_E_LPANEGA = 0x0001,
-};
-
-/* DM9161 */
-enum PHY_16_BIT {
- PHY_16_BP4B45 = 0x8000, PHY_16_BPSCR = 0x4000, PHY_16_BPALIGN = 0x2000,
- PHY_16_BP_ADPOK = 0x1000, PHY_16_Repeatmode = 0x0800,
- PHY_16_TXselect = 0x0400,
- PHY_16_Rsvd = 0x0200, PHY_16_RMIIEnable = 0x0100,
- PHY_16_Force100LNK = 0x0080,
- PHY_16_APDLED_CTL = 0x0040, PHY_16_COLLED_CTL = 0x0020,
- PHY_16_RPDCTR_EN = 0x0010,
- PHY_16_ResetStMch = 0x0008, PHY_16_PreamSupr = 0x0004,
- PHY_16_Sleepmode = 0x0002,
- PHY_16_RemoteLoopOut = 0x0001,
-};