diff options
author | Tom Rini <trini@ti.com> | 2012-10-22 23:54:38 (GMT) |
---|---|---|
committer | Tom Rini <trini@ti.com> | 2012-10-22 23:54:38 (GMT) |
commit | c7656bab411433f987baa2288eff8c78ddc0f378 (patch) | |
tree | 18fe8fa515ecdea19afa83d1af0c6eff4946a5d4 | |
parent | bdc3ff6e4f75813d01e51081799d10e4a9c7fbcb (diff) | |
parent | 23028d69e950023a3cb605751dbcb1e314be8b36 (diff) | |
download | u-boot-c7656bab411433f987baa2288eff8c78ddc0f378.tar.xz |
Merge branch 'master' of git://www.denx.de/git/u-boot-mpc85xx
85 files changed, 6764 insertions, 513 deletions
@@ -363,6 +363,12 @@ The following options need to be configured: ICache only when Code runs from RAM. - 85xx CPU Options: + CONFIG_SYS_PPC64 + + Specifies that the core is a 64-bit PowerPC implementation (implements + the "64" category of the Power ISA). This is necessary for ePAPR + compliance, among other possible reasons. + CONFIG_SYS_FSL_TBCLK_DIV Defines the core time base clock divider ratio compared to the diff --git a/arch/powerpc/cpu/mpc85xx/Makefile b/arch/powerpc/cpu/mpc85xx/Makefile index 33e93c8..78c412d 100644 --- a/arch/powerpc/cpu/mpc85xx/Makefile +++ b/arch/powerpc/cpu/mpc85xx/Makefile @@ -66,6 +66,9 @@ COBJS-$(CONFIG_PPC_P2041) += ddr-gen3.o COBJS-$(CONFIG_PPC_P3041) += ddr-gen3.o COBJS-$(CONFIG_PPC_P4080) += ddr-gen3.o COBJS-$(CONFIG_PPC_P5020) += ddr-gen3.o +COBJS-$(CONFIG_PPC_P5040) += ddr-gen3.o +COBJS-$(CONFIG_PPC_T4240) += ddr-gen3.o +COBJS-$(CONFIG_PPC_B4860) += ddr-gen3.o COBJS-$(CONFIG_BSC9131) += ddr-gen3.o COBJS-$(CONFIG_CPM2) += ether_fcc.o @@ -80,10 +83,14 @@ COBJS-$(CONFIG_PPC_P2041) += p2041_ids.o COBJS-$(CONFIG_PPC_P3041) += p3041_ids.o COBJS-$(CONFIG_PPC_P4080) += p4080_ids.o COBJS-$(CONFIG_PPC_P5020) += p5020_ids.o +COBJS-$(CONFIG_PPC_P5040) += p5040_ids.o +COBJS-$(CONFIG_PPC_T4240) += t4240_ids.o +COBJS-$(CONFIG_PPC_B4860) += b4860_ids.o COBJS-$(CONFIG_QE) += qe_io.o COBJS-$(CONFIG_CPM2) += serial_scc.o -COBJS-$(CONFIG_FSL_CORENET) += fsl_corenet_serdes.o +COBJS-$(CONFIG_SYS_FSL_QORIQ_CHASSIS1) += fsl_corenet_serdes.o +COBJS-$(CONFIG_SYS_FSL_QORIQ_CHASSIS2) += fsl_corenet2_serdes.o # SoC specific SERDES support COBJS-$(CONFIG_MPC8536) += mpc8536_serdes.o @@ -110,6 +117,9 @@ COBJS-$(CONFIG_PPC_P2041) += p2041_serdes.o COBJS-$(CONFIG_PPC_P3041) += p3041_serdes.o COBJS-$(CONFIG_PPC_P4080) += p4080_serdes.o COBJS-$(CONFIG_PPC_P5020) += p5020_serdes.o +COBJS-$(CONFIG_PPC_P5040) += p5040_serdes.o +COBJS-$(CONFIG_PPC_T4240) += t4240_serdes.o +COBJS-$(CONFIG_PPC_B4860) += b4860_serdes.o COBJS = $(COBJS-y) COBJS += cpu.o diff --git a/arch/powerpc/cpu/mpc85xx/b4860_ids.c b/arch/powerpc/cpu/mpc85xx/b4860_ids.c new file mode 100644 index 0000000..7d33731 --- /dev/null +++ b/arch/powerpc/cpu/mpc85xx/b4860_ids.c @@ -0,0 +1,141 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/fsl_portals.h> +#include <asm/fsl_liodn.h> + +#ifdef CONFIG_SYS_DPAA_QBMAN +struct qportal_info qp_info[CONFIG_SYS_QMAN_NUM_PORTALS] = { + /* dqrr liodn, frame data liodn, liodn off, sdest */ + SET_QP_INFO(1, 27, 1, 0), + SET_QP_INFO(2, 28, 1, 0), + SET_QP_INFO(3, 29, 1, 1), + SET_QP_INFO(4, 30, 1, 1), + SET_QP_INFO(5, 31, 1, 2), + SET_QP_INFO(6, 32, 1, 2), + SET_QP_INFO(7, 33, 1, 3), + SET_QP_INFO(8, 34, 1, 3), + SET_QP_INFO(9, 35, 1, 0), + SET_QP_INFO(10, 36, 1, 0), + SET_QP_INFO(11, 37, 1, 1), + SET_QP_INFO(12, 38, 1, 1), + SET_QP_INFO(13, 39, 1, 2), + SET_QP_INFO(14, 40, 1, 2), + SET_QP_INFO(15, 41, 1, 3), + SET_QP_INFO(16, 42, 1, 3), + SET_QP_INFO(17, 43, 1, 0), + SET_QP_INFO(18, 44, 1, 0), + SET_QP_INFO(19, 45, 1, 1), + SET_QP_INFO(20, 46, 1, 1), + SET_QP_INFO(21, 47, 1, 2), + SET_QP_INFO(22, 48, 1, 2), + SET_QP_INFO(23, 49, 1, 3), + SET_QP_INFO(24, 50, 1, 3), + SET_QP_INFO(25, 51, 1, 0), +}; +#endif + +struct srio_liodn_id_table srio_liodn_tbl[] = { + SET_SRIO_LIODN_1(1, 307), + SET_SRIO_LIODN_1(2, 387), +}; +int srio_liodn_tbl_sz = ARRAY_SIZE(srio_liodn_tbl); + +struct liodn_id_table liodn_tbl[] = { +#ifdef CONFIG_SYS_DPAA_QBMAN + SET_QMAN_LIODN(62), + SET_BMAN_LIODN(63), +#endif + + SET_SDHC_LIODN(1, 552), + + SET_USB_LIODN(1, "fsl-usb2-mph", 553), + + SET_PCI_LIODN(CONFIG_SYS_FSL_PCIE_COMPAT, 1, 148), + + SET_DMA_LIODN(1, 147), + SET_DMA_LIODN(2, 227), + + SET_GUTS_LIODN("fsl,rapidio-delta", 199, rio1liodnr, 0), + SET_GUTS_LIODN(NULL, 200, rio2liodnr, 0), + SET_GUTS_LIODN(NULL, 201, rio1maintliodnr, 0), + SET_GUTS_LIODN(NULL, 202, rio2maintliodnr, 0), + + /* SET_NEXUS_LIODN(557), -- not yet implemented */ +}; +int liodn_tbl_sz = ARRAY_SIZE(liodn_tbl); + +#ifdef CONFIG_SYS_DPAA_FMAN +struct liodn_id_table fman1_liodn_tbl[] = { + SET_FMAN_RX_1G_LIODN(1, 0, 88), + SET_FMAN_RX_1G_LIODN(1, 1, 89), + SET_FMAN_RX_1G_LIODN(1, 2, 90), + SET_FMAN_RX_1G_LIODN(1, 3, 91), + SET_FMAN_RX_1G_LIODN(1, 4, 92), + SET_FMAN_RX_1G_LIODN(1, 5, 93), + SET_FMAN_RX_10G_LIODN(1, 0, 94), + SET_FMAN_RX_10G_LIODN(1, 1, 95), +}; +int fman1_liodn_tbl_sz = ARRAY_SIZE(fman1_liodn_tbl); +#endif + +struct liodn_id_table sec_liodn_tbl[] = { + SET_SEC_JR_LIODN_ENTRY(0, 454, 458), + SET_SEC_JR_LIODN_ENTRY(1, 455, 459), + SET_SEC_JR_LIODN_ENTRY(2, 456, 460), + SET_SEC_JR_LIODN_ENTRY(3, 457, 461), + SET_SEC_RTIC_LIODN_ENTRY(a, 453), + SET_SEC_RTIC_LIODN_ENTRY(b, 549), + SET_SEC_RTIC_LIODN_ENTRY(c, 550), + SET_SEC_RTIC_LIODN_ENTRY(d, 551), + SET_SEC_DECO_LIODN_ENTRY(0, 541, 610), + SET_SEC_DECO_LIODN_ENTRY(1, 542, 611), + SET_SEC_DECO_LIODN_ENTRY(2, 543, 612), + SET_SEC_DECO_LIODN_ENTRY(3, 544, 613), + SET_SEC_DECO_LIODN_ENTRY(4, 545, 614), + SET_SEC_DECO_LIODN_ENTRY(5, 546, 615), + SET_SEC_DECO_LIODN_ENTRY(6, 547, 616), + SET_SEC_DECO_LIODN_ENTRY(7, 548, 617), +}; +int sec_liodn_tbl_sz = ARRAY_SIZE(sec_liodn_tbl); + +#ifdef CONFIG_SYS_DPAA_RMAN +struct liodn_id_table rman_liodn_tbl[] = { + /* Set RMan block 0-3 liodn offset */ + SET_RMAN_LIODN(0, 678), + SET_RMAN_LIODN(1, 679), + SET_RMAN_LIODN(2, 680), + SET_RMAN_LIODN(3, 681), +}; +int rman_liodn_tbl_sz = ARRAY_SIZE(rman_liodn_tbl); +#endif + +struct liodn_id_table liodn_bases[] = { + [FSL_HW_PORTAL_SEC] = SET_LIODN_BASE_2(462, 558), +#ifdef CONFIG_SYS_DPAA_FMAN + [FSL_HW_PORTAL_FMAN1] = SET_LIODN_BASE_1(973), +#endif +#ifdef CONFIG_SYS_DPAA_RMAN + [FSL_HW_PORTAL_RMAN] = SET_LIODN_BASE_1(922), +#endif +}; diff --git a/arch/powerpc/cpu/mpc85xx/b4860_serdes.c b/arch/powerpc/cpu/mpc85xx/b4860_serdes.c new file mode 100644 index 0000000..9990202 --- /dev/null +++ b/arch/powerpc/cpu/mpc85xx/b4860_serdes.c @@ -0,0 +1,162 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/fsl_serdes.h> +#include <asm/processor.h> +#include <asm/io.h> +#include "fsl_corenet2_serdes.h" + +struct serdes_config { + u8 protocol; + u8 lanes[SRDS_MAX_LANES]; +}; + +static struct serdes_config serdes1_cfg_tbl[] = { + /* SerDes 1 */ + {0x0D, {CPRI8, CPRI7, CPRI6, CPRI5, + CPRI4, CPRI3, CPRI2, CPRI1}}, + {0x0E, {CPRI8, CPRI7, CPRI6, CPRI5, + CPRI4, CPRI3, CPRI2, CPRI1}}, + {0x12, {CPRI8, CPRI7, CPRI6, CPRI5, + CPRI4, CPRI3, CPRI2, CPRI1}}, + {0x2a, {SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6, + CPRI6, CPRI5, CPRI4, CPRI3, CPRI2, CPRI1}}, + {0x30, {AURORA, AURORA, + SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, + CPRI4, CPRI3, CPRI2, CPRI1}}, + {0x32, {AURORA, AURORA, + SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, + CPRI4, CPRI3, CPRI2, CPRI1}}, + {0x33, {AURORA, AURORA, + SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, + CPRI4, CPRI3, CPRI2, CPRI1}}, + {0x34, {AURORA, AURORA, + SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, + CPRI4, CPRI3, CPRI2, CPRI1}}, + {0x3E, {CPRI8, CPRI7, CPRI6, CPRI5, + CPRI4, CPRI3, CPRI2, CPRI1}}, + {} +}; +static struct serdes_config serdes2_cfg_tbl[] = { + /* SerDes 2 */ + {0x18, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, + AURORA, AURORA, SRIO1, SRIO1}}, + {0x1D, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, + AURORA, AURORA, SRIO1, SRIO1}}, + {0x2B, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + SRIO2, SRIO2, + AURORA, AURORA, SRIO1, SRIO1}}, + {0x30, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + SRIO2, SRIO2, + AURORA, AURORA, + SRIO1, SRIO1}}, + {0x49, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + SGMII_FM1_DTSEC3, AURORA, + SRIO1, SRIO1, SRIO1, SRIO1}}, + {0x4A, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + SGMII_FM1_DTSEC3, AURORA, + SRIO1, SRIO1, SRIO1, SRIO1}}, + {0x4C, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + SGMII_FM1_DTSEC3, AURORA, + SRIO1, SRIO1, SRIO1, SRIO1}}, + {0x4E, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + SGMII_FM1_DTSEC3, AURORA, + SRIO1, SRIO1, SRIO1, SRIO1}}, + {0x84, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + SRIO2, SRIO2, AURORA, AURORA, + XFI_FM1_MAC9, XFI_FM1_MAC10}}, + {0x85, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + SRIO2, SRIO2, AURORA, AURORA, + XFI_FM1_MAC9, XFI_FM1_MAC10}}, + {0x87, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + SRIO2, SRIO2, + SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, + XFI_FM1_MAC9, XFI_FM1_MAC10}}, + {0x93, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, + XAUI_FM1_MAC10, XAUI_FM1_MAC10, + XAUI_FM1_MAC10, XAUI_FM1_MAC10}}, + {0x9E, {PCIE1, PCIE1, PCIE1, PCIE1, + XAUI_FM1_MAC10, XAUI_FM1_MAC10, + XAUI_FM1_MAC10, XAUI_FM1_MAC10}}, + {0x9A, {PCIE1, PCIE1, + SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, + XAUI_FM1_MAC10, XAUI_FM1_MAC10, + XAUI_FM1_MAC10, XAUI_FM1_MAC10}}, + {0xB2, {PCIE1, PCIE1, PCIE1, PCIE1, + SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, + XFI_FM1_MAC9, XFI_FM1_MAC10}}, + {0xC3, {XAUI_FM1_MAC9, XAUI_FM1_MAC9, + XAUI_FM1_MAC9, XAUI_FM1_MAC9, + SRIO1, SRIO1, SRIO1, SRIO1}}, + {} +}; +static struct serdes_config *serdes_cfg_tbl[] = { + serdes1_cfg_tbl, + serdes2_cfg_tbl, +}; + +enum srds_prtcl serdes_get_prtcl(int serdes, int cfg, int lane) +{ + struct serdes_config *ptr; + + if (serdes >= ARRAY_SIZE(serdes_cfg_tbl)) + return 0; + + ptr = serdes_cfg_tbl[serdes]; + while (ptr->protocol) { + if (ptr->protocol == cfg) + return ptr->lanes[lane]; + ptr++; + } + + return 0; +} + +int is_serdes_prtcl_valid(int serdes, u32 prtcl) +{ + int i; + struct serdes_config *ptr; + + if (serdes >= ARRAY_SIZE(serdes_cfg_tbl)) + return 0; + + ptr = serdes_cfg_tbl[serdes]; + while (ptr->protocol) { + if (ptr->protocol == prtcl) + break; + ptr++; + } + + if (!ptr->protocol) + return 0; + + for (i = 0; i < SRDS_MAX_LANES; i++) { + if (ptr->lanes[i] != NONE) + return 1; + } + + return 0; +} diff --git a/arch/powerpc/cpu/mpc85xx/cmd_errata.c b/arch/powerpc/cpu/mpc85xx/cmd_errata.c index e8989bd..2be192d 100644 --- a/arch/powerpc/cpu/mpc85xx/cmd_errata.c +++ b/arch/powerpc/cpu/mpc85xx/cmd_errata.c @@ -76,11 +76,15 @@ static int do_errata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) #if defined(CONFIG_SYS_FSL_ERRATUM_ESDHC111) puts("Work-around for Erratum ESDHC111 enabled\n"); #endif +#ifdef CONFIG_SYS_FSL_ERRATUM_A004468 + puts("Work-around for Erratum A004468 enabled\n"); +#endif #if defined(CONFIG_SYS_FSL_ERRATUM_ESDHC135) puts("Work-around for Erratum ESDHC135 enabled\n"); #endif -#if defined(CONFIG_SYS_FSL_ERRATUM_ESDHC136) - puts("Work-around for Erratum ESDHC136 enabled\n"); +#if defined(CONFIG_SYS_FSL_ERRATUM_ESDHC13) + if (SVR_MAJ(svr) < 3) + puts("Work-around for Erratum ESDHC13 enabled\n"); #endif #if defined(CONFIG_SYS_FSL_ERRATUM_ESDHC_A001) puts("Work-around for Erratum ESDHC-A001 enabled\n"); @@ -127,6 +131,12 @@ static int do_errata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) #ifdef CONFIG_SYS_FSL_ERRATUM_A004510 puts("Work-around for Erratum A004510 enabled\n"); #endif +#ifdef CONFIG_SYS_FSL_ERRATUM_SRIO_A004034 + puts("Work-around for Erratum SRIO-A004034 enabled\n"); +#endif +#ifdef CONFIG_SYS_FSL_ERRATUM_A_004934 + puts("Work-around for Erratum A004934 enabled\n"); +#endif return 0; } diff --git a/arch/powerpc/cpu/mpc85xx/cpu.c b/arch/powerpc/cpu/mpc85xx/cpu.c index 5ddb294..db232e6 100644 --- a/arch/powerpc/cpu/mpc85xx/cpu.c +++ b/arch/powerpc/cpu/mpc85xx/cpu.c @@ -60,20 +60,32 @@ int checkcpu (void) uint major, minor; struct cpu_type *cpu; char buf1[32], buf2[32]; -#if defined(CONFIG_DDR_CLK_FREQ) || defined(CONFIG_FSL_CORENET) +#if (defined(CONFIG_DDR_CLK_FREQ) || \ + defined(CONFIG_FSL_CORENET)) && !defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2) volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); #endif /* CONFIG_FSL_CORENET */ -#ifdef CONFIG_DDR_CLK_FREQ - u32 ddr_ratio = ((gur->porpllsr) & MPC85xx_PORPLLSR_DDR_RATIO) - >> MPC85xx_PORPLLSR_DDR_RATIO_SHIFT; -#else + + /* + * Cornet platforms use ddr sync bit in RCW to indicate sync vs async + * mode. Previous platform use ddr ratio to do the same. This + * information is only for display here. + */ #ifdef CONFIG_FSL_CORENET +#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2 + u32 ddr_sync = 0; /* only async mode is supported */ +#else u32 ddr_sync = ((gur->rcwsr[5]) & FSL_CORENET_RCWSR5_DDR_SYNC) >> FSL_CORENET_RCWSR5_DDR_SYNC_SHIFT; +#endif /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */ +#else /* CONFIG_FSL_CORENET */ +#ifdef CONFIG_DDR_CLK_FREQ + u32 ddr_ratio = ((gur->porpllsr) & MPC85xx_PORPLLSR_DDR_RATIO) + >> MPC85xx_PORPLLSR_DDR_RATIO_SHIFT; #else u32 ddr_ratio = 0; -#endif /* CONFIG_FSL_CORENET */ #endif /* CONFIG_DDR_CLK_FREQ */ +#endif /* CONFIG_FSL_CORENET */ + unsigned int i, core, nr_cores = cpu_numcores(); u32 mask = cpu_mask(); @@ -127,6 +139,11 @@ int checkcpu (void) printf(", Version: %d.%d, (0x%08x)\n", major, minor, pvr); + if (nr_cores > CONFIG_MAX_CPUS) { + panic("\nUnexpected number of cores: %d, max is %d\n", + nr_cores, CONFIG_MAX_CPUS); + } + get_sys_info(&sysinfo); puts("Clock Configuration:"); @@ -181,6 +198,10 @@ int checkcpu (void) } #endif +#if defined(CONFIG_FSL_IFC) + printf("IFC:%-4s MHz\n", strmhz(buf1, sysinfo.freqLocalBus)); +#endif + #ifdef CONFIG_CPM2 printf("CPM: %s MHz\n", strmhz(buf1, sysinfo.freqSystemBus)); #endif @@ -196,6 +217,10 @@ int checkcpu (void) } #endif +#ifdef CONFIG_SYS_DPAA_QBMAN + printf(" QMAN: %s MHz\n", strmhz(buf1, sysinfo.freqQMAN)); +#endif + #ifdef CONFIG_SYS_DPAA_PME printf(" PME: %s MHz\n", strmhz(buf1, sysinfo.freqPME)); #endif @@ -270,10 +295,7 @@ reset_85xx_watchdog(void) /* * Clear TSR(WIS) bit by writing 1 */ - unsigned long val; - val = mfspr(SPRN_TSR); - val |= TSR_WIS; - mtspr(SPRN_TSR, val); + mtspr(SPRN_TSR, TSR_WIS); } #endif /* CONFIG_WATCHDOG */ diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init.c b/arch/powerpc/cpu/mpc85xx/cpu_init.c index afb5671..736293c 100644 --- a/arch/powerpc/cpu/mpc85xx/cpu_init.c +++ b/arch/powerpc/cpu/mpc85xx/cpu_init.c @@ -295,6 +295,43 @@ static void __fsl_serdes__init(void) } __attribute__((weak, alias("__fsl_serdes__init"))) void fsl_serdes_init(void); +#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2 +int enable_cluster_l2(void) +{ + int i = 0; + u32 cluster; + ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + struct ccsr_cluster_l2 __iomem *l2cache; + + cluster = in_be32(&gur->tp_cluster[i].lower); + if (cluster & TP_CLUSTER_EOC) + return 0; + + /* The first cache has already been set up, so skip it */ + i++; + + /* Look through the remaining clusters, and set up their caches */ + do { + l2cache = (void __iomem *)(CONFIG_SYS_FSL_CLUSTER_1_L2 + i * 0x40000); + cluster = in_be32(&gur->tp_cluster[i].lower); + + /* set stash ID to (cluster) * 2 + 32 + 1 */ + clrsetbits_be32(&l2cache->l2csr1, 0xff, 32 + i * 2 + 1); + + printf("enable l2 for cluster %d %p\n", i, l2cache); + + out_be32(&l2cache->l2csr0, L2CSR0_L2FI|L2CSR0_L2LFC); + while ((in_be32(&l2cache->l2csr0) & + (L2CSR0_L2FI|L2CSR0_L2LFC)) != 0) + ; + out_be32(&l2cache->l2csr0, L2CSR0_L2E); + i++; + } while (!(cluster & TP_CLUSTER_EOC)); + + return 0; +} +#endif + /* * Initialize L2 as cache. * @@ -306,7 +343,12 @@ int cpu_init_r(void) { __maybe_unused u32 svr = get_svr(); #ifdef CONFIG_SYS_LBC_LCRR - volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; + fsl_lbc_t *lbc = (void __iomem *)LBC_BASE_ADDR; +#endif +#ifdef CONFIG_L2_CACHE + ccsr_l2cache_t *l2cache = (void __iomem *)CONFIG_SYS_MPC85xx_L2_ADDR; +#elif defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2) + struct ccsr_cluster_l2 * l2cache = (void __iomem *)CONFIG_SYS_FSL_CLUSTER_1_L2; #endif #if defined(CONFIG_SYS_P4080_ERRATUM_CPU22) || \ @@ -356,7 +398,6 @@ int cpu_init_r(void) puts ("L2: "); #if defined(CONFIG_L2_CACHE) - volatile ccsr_l2cache_t *l2cache = (void *)CONFIG_SYS_MPC85xx_L2_ADDR; volatile uint cache_ctl; uint ver; u32 l2siz_field; @@ -467,6 +508,11 @@ int cpu_init_r(void) } skip_l2: +#elif defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2) + if (l2cache->l2csr0 & L2CSR0_L2E) + printf("%d KB enabled\n", (l2cache->l2cfg0 & 0x3fff) * 64); + + enable_cluster_l2(); #else puts("disabled\n"); #endif @@ -478,7 +524,7 @@ skip_l2: #ifdef CONFIG_SYS_SRIO srio_init(); -#ifdef CONFIG_FSL_CORENET +#ifdef CONFIG_SYS_FSL_SRIO_PCIE_BOOT_MASTER char *s = getenv("bootmaster"); if (s) { if (!strcmp(s, "SRIO1")) { @@ -497,11 +543,13 @@ skip_l2: setup_mp(); #endif -#ifdef CONFIG_SYS_FSL_ERRATUM_ESDHC136 +#ifdef CONFIG_SYS_FSL_ERRATUM_ESDHC13 { - void *p; - p = (void *)CONFIG_SYS_DCSRBAR + 0x20520; - setbits_be32(p, 1 << (31 - 14)); + if (SVR_MAJ(svr) < 3) { + void *p; + p = (void *)CONFIG_SYS_DCSRBAR + 0x20520; + setbits_be32(p, 1 << (31 - 14)); + } } #endif diff --git a/arch/powerpc/cpu/mpc85xx/ddr-gen3.c b/arch/powerpc/cpu/mpc85xx/ddr-gen3.c index ca4ed62..f118dd5 100644 --- a/arch/powerpc/cpu/mpc85xx/ddr-gen3.c +++ b/arch/powerpc/cpu/mpc85xx/ddr-gen3.c @@ -18,12 +18,14 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, unsigned int ctrl_num) { - unsigned int i; + unsigned int i, bus_width; volatile ccsr_ddr_t *ddr; u32 temp_sdram_cfg; + u32 total_gb_size_per_controller; + int timeout; #ifdef CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134 + int timeout_save; volatile ccsr_local_ecm_t *ecm = (void *)CONFIG_SYS_MPC85xx_ECM_ADDR; - u32 total_gb_size_per_controller; unsigned int csn_bnds_backup = 0, cs_sa, cs_ea, *csn_bnds_t; int csn = -1; #endif @@ -52,8 +54,8 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, return; } - out_be32(&ddr->eor, regs->ddr_eor); - + if (regs->ddr_eor) + out_be32(&ddr->eor, regs->ddr_eor); #ifdef CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134 debug("Workaround for ERRATUM_DDR111_DDR134\n"); for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) { @@ -121,6 +123,11 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, out_be32(&ddr->timing_cfg_5, regs->timing_cfg_5); out_be32(&ddr->ddr_zq_cntl, regs->ddr_zq_cntl); out_be32(&ddr->ddr_wrlvl_cntl, regs->ddr_wrlvl_cntl); + if (regs->ddr_wrlvl_cntl_2) + out_be32(&ddr->ddr_wrlvl_cntl_2, regs->ddr_wrlvl_cntl_2); + if (regs->ddr_wrlvl_cntl_3) + out_be32(&ddr->ddr_wrlvl_cntl_3, regs->ddr_wrlvl_cntl_3); + out_be32(&ddr->ddr_sr_cntr, regs->ddr_sr_cntr); out_be32(&ddr->ddr_sdram_rcw_1, regs->ddr_sdram_rcw_1); out_be32(&ddr->ddr_sdram_rcw_2, regs->ddr_sdram_rcw_2); @@ -134,6 +141,9 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, out_be32(&ddr->debug[i], regs->debug[i]); } } +#ifdef CONFIG_SYS_FSL_ERRATUM_A_004934 + out_be32(&ddr->debug[28], 0x00003000); +#endif #ifdef CONFIG_SYS_FSL_ERRATUM_DDR_A003474 out_be32(&ddr->debug[12], 0x00000015); @@ -270,9 +280,48 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, out_be32(&ddr->sdram_cfg, temp_sdram_cfg | SDRAM_CFG_MEM_EN); asm volatile("sync;isync"); + total_gb_size_per_controller = 0; + for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) { + if (!(regs->cs[i].config & 0x80000000)) + continue; + total_gb_size_per_controller += 1 << ( + ((regs->cs[i].config >> 14) & 0x3) + 2 + + ((regs->cs[i].config >> 8) & 0x7) + 12 + + ((regs->cs[i].config >> 0) & 0x7) + 8 + + 3 - ((regs->ddr_sdram_cfg >> 19) & 0x3) - + 26); /* minus 26 (count of 64M) */ + } + if (fsl_ddr_get_intl3r() & 0x80000000) /* 3-way interleaving */ + total_gb_size_per_controller *= 3; + else if (regs->cs[0].config & 0x20000000) /* 2-way interleaving */ + total_gb_size_per_controller <<= 1; + /* + * total memory / bus width = transactions needed + * transactions needed / data rate = seconds + * to add plenty of buffer, double the time + * For example, 2GB on 666MT/s 64-bit bus takes about 402ms + * Let's wait for 800ms + */ + bus_width = 3 - ((ddr->sdram_cfg & SDRAM_CFG_DBW_MASK) + >> SDRAM_CFG_DBW_SHIFT); + timeout = ((total_gb_size_per_controller << (6 - bus_width)) * 100 / + (get_ddr_freq(0) >> 20)) << 1; +#ifdef CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134 + timeout_save = timeout; +#endif + total_gb_size_per_controller >>= 4; /* shift down to gb size */ + debug("total %d GB\n", total_gb_size_per_controller); + debug("Need to wait up to %d * 10ms\n", timeout); + /* Poll DDR_SDRAM_CFG_2[D_INIT] bit until auto-data init is done. */ - while (in_be32(&ddr->sdram_cfg_2) & SDRAM_CFG2_D_INIT) + while ((in_be32(&ddr->sdram_cfg_2) & SDRAM_CFG2_D_INIT) && + (timeout >= 0)) { udelay(10000); /* throttle polling rate */ + timeout--; + } + + if (timeout <= 0) + printf("Waiting for D_INIT timeout. Memory may not work.\n"); #ifdef CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134 /* continue this workaround */ @@ -330,23 +379,9 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, while (in_be32(&ddr->debug[1]) & 0x400) udelay(10000); /* throttle polling rate */ - /* 7. Wait for 400ms/GB */ - total_gb_size_per_controller = 0; - for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) { - if (i == csn) { - total_gb_size_per_controller += - ((csn_bnds_backup & 0xFFFF) >> 6) - - (csn_bnds_backup >> 22) + 1; - } else { - total_gb_size_per_controller += - ((regs->cs[i].bnds & 0xFFFF) >> 6) - - (regs->cs[i].bnds >> 22) + 1; - } - } - if (in_be32(&ddr->sdram_cfg) & 0x80000) - total_gb_size_per_controller <<= 1; - debug("Wait for %d ms\n", total_gb_size_per_controller * 400); - udelay(total_gb_size_per_controller * 400000); + /* 7. Wait for state machine 2nd run, roughly 400ms/GB */ + debug("Wait for %d * 10ms\n", timeout_save); + udelay(timeout_save * 10000); /* 8. Set sdram_cfg_2[dinit] if options requires */ setbits_be32(&ddr->sdram_cfg_2, @@ -354,8 +389,16 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, debug("Setting sdram_cfg_2 to 0x%08x\n", in_be32(&ddr->sdram_cfg_2)); /* 9. Poll until dinit is cleared */ - while (in_be32(&ddr->sdram_cfg_2) & SDRAM_CFG2_D_INIT) - udelay(10000); + timeout = timeout_save; + debug("Need to wait up to %d * 10ms\n", timeout); + while ((in_be32(&ddr->sdram_cfg_2) & SDRAM_CFG2_D_INIT) && + (timeout >= 0)) { + udelay(10000); /* throttle polling rate */ + timeout--; + } + + if (timeout <= 0) + printf("Waiting for D_INIT timeout. Memory may not work.\n"); /* 10. Clear EEBACR[3] */ clrbits_be32(&ecm->eebacr, 10000000); diff --git a/arch/powerpc/cpu/mpc85xx/fdt.c b/arch/powerpc/cpu/mpc85xx/fdt.c index a0a9b4c..ab09330 100644 --- a/arch/powerpc/cpu/mpc85xx/fdt.c +++ b/arch/powerpc/cpu/mpc85xx/fdt.c @@ -47,8 +47,8 @@ extern void ft_srio_setup(void *blob); void ft_fixup_cpu(void *blob, u64 memory_limit) { int off; - ulong spin_tbl_addr = get_spin_phys_addr(); - u32 bootpg = determine_mp_bootpg(); + phys_addr_t spin_tbl_addr = get_spin_phys_addr(); + u32 bootpg = determine_mp_bootpg(NULL); u32 id = get_my_id(); const char *enable_method; @@ -97,7 +97,16 @@ void ft_fixup_cpu(void *blob, u64 memory_limit) if ((u64)bootpg < memory_limit) { off = fdt_add_mem_rsv(blob, bootpg, (u64)4096); if (off < 0) - printf("%s: %s\n", __FUNCTION__, fdt_strerror(off)); + printf("Failed to reserve memory for bootpg: %s\n", + fdt_strerror(off)); + } + /* Reserve spin table page */ + if (spin_tbl_addr < memory_limit) { + off = fdt_add_mem_rsv(blob, + (spin_tbl_addr & ~0xffful), 4096); + if (off < 0) + printf("Failed to reserve memory for spin table: %s\n", + fdt_strerror(off)); } } #endif @@ -220,12 +229,19 @@ static inline void ft_fixup_l2cache(void *blob) /* we dont bother w/L3 since no platform of this type has one */ } -#elif defined(CONFIG_BACKSIDE_L2_CACHE) +#elif defined(CONFIG_BACKSIDE_L2_CACHE) || \ + defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2) static inline void ft_fixup_l2cache(void *blob) { int off, l2_off, l3_off = -1; u32 *ph; +#ifdef CONFIG_BACKSIDE_L2_CACHE u32 l2cfg0 = mfspr(SPRN_L2CFG0); +#else + struct ccsr_cluster_l2 *l2cache = + (struct ccsr_cluster_l2 __iomem *)(CONFIG_SYS_FSL_CLUSTER_1_L2); + u32 l2cfg0 = in_be32(&l2cache->l2cfg0); +#endif u32 size, line_size, num_ways, num_sets; int has_l2 = 1; @@ -257,7 +273,12 @@ static inline void ft_fixup_l2cache(void *blob) if (has_l2) { #ifdef CONFIG_SYS_CACHE_STASHING u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", 0); +#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2 + /* Only initialize every eighth thread */ + if (reg && !((*reg) % 8)) +#else if (reg) +#endif fdt_setprop_cell(blob, l2_off, "cache-stash-id", (*reg * 2) + 32 + 1); #endif @@ -390,6 +411,11 @@ static void ft_fixup_dpaa_clks(void *blob) #endif #endif +#ifdef CONFIG_SYS_DPAA_QBMAN + do_fixup_by_compat_u32(blob, "fsl,qman", + "clock-frequency", sysinfo.freqQMAN, 1); +#endif + #ifdef CONFIG_SYS_DPAA_PME do_fixup_by_compat_u32(blob, "fsl,pme", "clock-frequency", sysinfo.freqPME, 1); diff --git a/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c b/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c new file mode 100644 index 0000000..01dcdf6 --- /dev/null +++ b/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c @@ -0,0 +1,203 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/fsl_serdes.h> +#include <asm/immap_85xx.h> +#include <asm/io.h> +#include <asm/processor.h> +#include <asm/fsl_law.h> +#include <asm/errno.h> +#include "fsl_corenet2_serdes.h" + +static u64 serdes1_prtcl_map; +static u64 serdes2_prtcl_map; +#ifdef CONFIG_SYS_FSL_SRDS_3 +static u64 serdes3_prtcl_map; +#endif +#ifdef CONFIG_SYS_FSL_SRDS_4 +static u64 serdes4_prtcl_map; +#endif + +#ifdef DEBUG +static const char *serdes_prtcl_str[] = { + [NONE] = "NA", + [PCIE1] = "PCIE1", + [PCIE2] = "PCIE2", + [PCIE3] = "PCIE3", + [PCIE4] = "PCIE4", + [SATA1] = "SATA1", + [SATA2] = "SATA2", + [SRIO1] = "SRIO1", + [SRIO2] = "SRIO2", + [SGMII_FM1_DTSEC1] = "SGMII_FM1_DTSEC1", + [SGMII_FM1_DTSEC2] = "SGMII_FM1_DTSEC2", + [SGMII_FM1_DTSEC3] = "SGMII_FM1_DTSEC3", + [SGMII_FM1_DTSEC4] = "SGMII_FM1_DTSEC4", + [SGMII_FM1_DTSEC5] = "SGMII_FM1_DTSEC5", + [SGMII_FM1_DTSEC6] = "SGMII_FM1_DTSEC6", + [SGMII_FM2_DTSEC1] = "SGMII_FM2_DTSEC1", + [SGMII_FM2_DTSEC2] = "SGMII_FM2_DTSEC2", + [SGMII_FM2_DTSEC3] = "SGMII_FM2_DTSEC3", + [SGMII_FM2_DTSEC4] = "SGMII_FM2_DTSEC4", + [XAUI_FM1] = "XAUI_FM1", + [XAUI_FM2] = "XAUI_FM2", + [AURORA] = "DEBUG", + [CPRI1] = "CPRI1", + [CPRI2] = "CPRI2", + [CPRI3] = "CPRI3", + [CPRI4] = "CPRI4", + [CPRI5] = "CPRI5", + [CPRI6] = "CPRI6", + [CPRI7] = "CPRI7", + [CPRI8] = "CPRI8", + [XAUI_FM1_MAC9] = "XAUI_FM1_MAC9", + [XAUI_FM1_MAC10] = "XAUI_FM1_MAC10", + [XAUI_FM2_MAC9] = "XAUI_FM2_MAC9", + [XAUI_FM2_MAC10] = "XAUI_FM2_MAC10", + [HIGIG_FM1_MAC9] = "HiGig_FM1_MAC9", + [HIGIG_FM1_MAC10] = "HiGig_FM1_MAC10", + [HIGIG_FM2_MAC9] = "HiGig_FM2_MAC9", + [HIGIG_FM2_MAC10] = "HiGig_FM2_MAC10", + [QSGMII_FM1_A] = "QSGMII_FM1_A", + [QSGMII_FM1_B] = "QSGMII_FM1_B", + [QSGMII_FM2_A] = "QSGMII_FM2_A", + [QSGMII_FM2_B] = "QSGMII_FM2_B", + [XFI_FM1_MAC9] = "XFI_FM1_MAC9", + [XFI_FM1_MAC10] = "XFI_FM1_MAC10", + [XFI_FM2_MAC9] = "XFI_FM2_MAC9", + [XFI_FM2_MAC10] = "XFI_FM2_MAC10", + [INTERLAKEN] = "INTERLAKEN", +}; +#endif + +int is_serdes_configured(enum srds_prtcl device) +{ + u64 ret = 0; + + ret |= (1ULL << device) & serdes1_prtcl_map; + ret |= (1ULL << device) & serdes2_prtcl_map; +#ifdef CONFIG_SYS_FSL_SRDS_3 + ret |= (1ULL << device) & serdes3_prtcl_map; +#endif +#ifdef CONFIG_SYS_FSL_SRDS_4 + ret |= (1ULL << device) & serdes4_prtcl_map; +#endif + + return !!ret; +} + +int serdes_get_first_lane(u32 sd, enum srds_prtcl device) +{ + const ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + u32 cfg = in_be32(&gur->rcwsr[4]); + int i; + + switch (sd) { + case FSL_SRDS_1: + cfg &= FSL_CORENET2_RCWSR4_SRDS1_PRTCL; + cfg >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT; + break; + case FSL_SRDS_2: + cfg &= FSL_CORENET2_RCWSR4_SRDS2_PRTCL; + cfg >>= FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT; + break; +#ifdef CONFIG_SYS_FSL_SRDS_3 + case FSL_SRDS_3: + cfg &= FSL_CORENET2_RCWSR4_SRDS3_PRTCL; + cfg >>= FSL_CORENET2_RCWSR4_SRDS3_PRTCL_SHIFT; + break; +#endif +#ifdef CONFIG_SYS_FSL_SRDS_4 + case FSL_SRDS_4: + cfg &= FSL_CORENET2_RCWSR4_SRDS4_PRTCL; + cfg >>= FSL_CORENET2_RCWSR4_SRDS4_PRTCL_SHIFT; + break; +#endif + default: + printf("invalid SerDes%d\n", sd); + break; + } + /* Is serdes enabled at all? */ + if (unlikely(cfg == 0)) + return -ENODEV; + + for (i = 0; i < SRDS_MAX_LANES; i++) { + if (serdes_get_prtcl(sd, cfg, i) == device) + return i; + } + + return -ENODEV; +} + +u64 serdes_init(u32 sd, u32 sd_addr, u32 sd_prctl_mask, u32 sd_prctl_shift) +{ + ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + u64 serdes_prtcl_map = 0; + u32 cfg; + int lane; + + cfg = in_be32(&gur->rcwsr[4]) & sd_prctl_mask; + /* Is serdes enabled at all? */ + if (!cfg) { + printf("SERDES%d is not enabled\n", sd + 1); + return 0; + } + + cfg >>= sd_prctl_shift; + printf("Using SERDES%d Protocol: 0x%x\n", sd + 1, cfg); + if (!is_serdes_prtcl_valid(sd, cfg)) + printf("SERDES%d[PRTCL] = 0x%x is not valid\n", sd + 1, cfg); + + for (lane = 0; lane < SRDS_MAX_LANES; lane++) { + enum srds_prtcl lane_prtcl = serdes_get_prtcl(sd, cfg, lane); + serdes_prtcl_map |= (1ULL << lane_prtcl); + } + + return serdes_prtcl_map; +} + +void fsl_serdes_init(void) +{ + + serdes1_prtcl_map = serdes_init(FSL_SRDS_1, + CONFIG_SYS_FSL_CORENET_SERDES_ADDR, + FSL_CORENET2_RCWSR4_SRDS1_PRTCL, + FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT); + serdes2_prtcl_map = serdes_init(FSL_SRDS_2, + CONFIG_SYS_FSL_CORENET_SERDES_ADDR + FSL_SRDS_2 * 0x1000, + FSL_CORENET2_RCWSR4_SRDS2_PRTCL, + FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT); +#ifdef CONFIG_SYS_FSL_SRDS_3 + serdes3_prtcl_map = serdes_init(FSL_SRDS_3, + CONFIG_SYS_FSL_CORENET_SERDES_ADDR + FSL_SRDS_3 * 0x1000, + FSL_CORENET2_RCWSR4_SRDS3_PRTCL, + FSL_CORENET2_RCWSR4_SRDS3_PRTCL_SHIFT); +#endif +#ifdef CONFIG_SYS_FSL_SRDS_4 + serdes4_prtcl_map = serdes_init(FSL_SRDS_4, + CONFIG_SYS_FSL_CORENET_SERDES_ADDR + FSL_SRDS_4 * 0x1000, + FSL_CORENET2_RCWSR4_SRDS4_PRTCL, + FSL_CORENET2_RCWSR4_SRDS4_PRTCL_SHIFT); +#endif + +} diff --git a/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.h b/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.h new file mode 100644 index 0000000..2258f41 --- /dev/null +++ b/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.h @@ -0,0 +1,26 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __FSL_CORENET2_SERDES_H +#define __FSL_CORENET2_SERDES_H + +int is_serdes_prtcl_valid(int serdes, u32 prtcl); +int serdes_lane_enabled(int lane); +enum srds_prtcl serdes_get_prtcl(int serdes, int cfg, int lane); +#endif /* __FSL_CORENET2_SERDES_H */ diff --git a/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c b/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c index 2a68060..e6b1b1b 100644 --- a/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c +++ b/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c @@ -92,10 +92,17 @@ static const struct { { 17, 163, FSL_SRDS_BANK_2 }, { 18, 164, FSL_SRDS_BANK_2 }, { 19, 165, FSL_SRDS_BANK_2 }, +#ifdef CONFIG_PPC_P4080 { 20, 170, FSL_SRDS_BANK_3 }, { 21, 171, FSL_SRDS_BANK_3 }, { 22, 172, FSL_SRDS_BANK_3 }, { 23, 173, FSL_SRDS_BANK_3 }, +#else + { 20, 166, FSL_SRDS_BANK_3 }, + { 21, 167, FSL_SRDS_BANK_3 }, + { 22, 168, FSL_SRDS_BANK_3 }, + { 23, 169, FSL_SRDS_BANK_3 }, +#endif }; int serdes_get_lane_idx(int lane) @@ -493,6 +500,9 @@ void fsl_serdes_init(void) ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); int cfg; serdes_corenet_t *srds_regs; +#ifdef CONFIG_PPC_P5040 + serdes_corenet_t *srds2_regs; +#endif int lane, bank, idx; int have_bank[SRDS_MAX_BANK] = {}; #ifdef CONFIG_SYS_P4080_ERRATUM_SERDES8 @@ -574,6 +584,34 @@ void fsl_serdes_init(void) } } +#ifdef CONFIG_PPC_P5040 + /* + * Lanes on bank 4 on P5040 are commented-out, but for some SERDES + * protocols, these lanes are routed to SATA. We use serdes_prtcl_map + * to decide whether a protocol is supported on a given lane, so SATA + * will be identified as not supported, and therefore not initialized. + * So for protocols which use SATA on bank4, we add SATA support in + * serdes_prtcl_map. + */ + switch (cfg) { + case 0x0: + case 0x1: + case 0x2: + case 0x3: + case 0x4: + case 0x5: + case 0x6: + case 0x7: + serdes_prtcl_map |= 1 << SATA1 | 1 << SATA2; + break; + default: + srds2_regs = (void *)CONFIG_SYS_FSL_CORENET_SERDES2_ADDR; + + /* We don't need bank 4, so power it down */ + setbits_be32(&srds2_regs->bank[0].rstctl, SRDS_RSTCTL_SDPD); + } +#endif + soc_serdes_init(); #ifdef CONFIG_SYS_P4080_ERRATUM_SERDES8 @@ -617,6 +655,38 @@ void fsl_serdes_init(void) } } +#ifdef CONFIG_SYS_FSL_ERRATUM_A004699 + /* + * To avoid the situation that resulted in the P4080 erratum + * SERDES-8, a given SerDes bank will use the PLLs from the previous + * bank if one of the PLL frequencies is a multiple of the other. For + * instance, if bank 3 is running at 2.5GHz and bank 2 is at 1.25GHz, + * then bank 3 will use bank 2's PLL. P5040 Erratum A-004699 says + * that, in this situation, lane synchronization is not initiated. So + * when we detect a bank with a "borrowed" PLL, we have to manually + * initiate lane synchronization. + */ + for (bank = FSL_SRDS_BANK_2; bank <= FSL_SRDS_BANK_3; bank++) { + /* Determine the first lane for this bank */ + unsigned int lane; + + for (lane = 0; lane < SRDS_MAX_LANES; lane++) + if (lanes[lane].bank == bank) + break; + idx = lanes[lane].idx; + + /* + * Check if the PLL for the bank is borrowed. The UOTHL + * bit of the first lane will tell us that. + */ + if (in_be32(&srds_regs->lane[idx].gcr0) & SRDS_GCR0_UOTHL) { + /* Manually start lane synchronization */ + setbits_be32(&srds_regs->bank[bank].pllcr0, + SRDS_PLLCR0_PVCOCNT_EN); + } + } +#endif + #if defined(CONFIG_SYS_P4080_ERRATUM_SERDES8) || defined (CONFIG_SYS_P4080_ERRATUM_SERDES9) for (lane = 0; lane < SRDS_MAX_LANES; lane++) { enum srds_prtcl lane_prtcl; diff --git a/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.h b/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.h index f261351..3c551e9 100644 --- a/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.h +++ b/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.h @@ -22,9 +22,6 @@ #ifndef __FSL_CORENET_SERDES_H #define __FSL_CORENET_SERDES_H -#define SRDS_MAX_LANES 18 -#define SRDS_MAX_BANK 3 - enum srds_bank { FSL_SRDS_BANK_1 = 0, FSL_SRDS_BANK_2 = 1, diff --git a/arch/powerpc/cpu/mpc85xx/liodn.c b/arch/powerpc/cpu/mpc85xx/liodn.c index 11881c9..2e53367 100644 --- a/arch/powerpc/cpu/mpc85xx/liodn.c +++ b/arch/powerpc/cpu/mpc85xx/liodn.c @@ -40,6 +40,7 @@ int get_dpaa_liodn(enum fsl_dpaa_dev dpaa_dev, u32 *liodns, int liodn_offset) return liodn_bases[dpaa_dev].num_ids; } +#ifdef CONFIG_SYS_SRIO static void set_srio_liodn(struct srio_liodn_id_table *tbl, int size) { int i; @@ -54,6 +55,7 @@ static void set_srio_liodn(struct srio_liodn_id_table *tbl, int size) } } } +#endif static void set_liodn(struct liodn_id_table *tbl, int size) { @@ -181,8 +183,10 @@ void set_liodns(void) /* setup general liodn offsets */ set_liodn(liodn_tbl, liodn_tbl_sz); +#ifdef CONFIG_SYS_SRIO /* setup SRIO port liodns */ set_srio_liodn(srio_liodn_tbl, srio_liodn_tbl_sz); +#endif /* setup SEC block liodn bases & offsets if we have one */ if (IS_E_PROCESSOR(get_svr())) { @@ -219,6 +223,7 @@ void set_liodns(void) #endif } +#ifdef CONFIG_SYS_SRIO static void fdt_fixup_srio_liodn(void *blob, struct srio_liodn_id_table *tbl) { int i, srio_off; @@ -247,6 +252,57 @@ static void fdt_fixup_srio_liodn(void *blob, struct srio_liodn_id_table *tbl) } } } +#endif + +#define CONFIG_SYS_MAX_PCI_EPS 8 +#define CONFIG_SYS_PCI_EP_LIODN_START 256 + +static void fdt_fixup_pci_liodn_offsets(void *fdt, const char *compat) +{ + int off, pci_idx = 0, pci_cnt = 0, i, rc; + const uint32_t *base_liodn; + uint32_t liodn_offs[CONFIG_SYS_MAX_PCI_EPS + 1] = { 0 }; + + /* + * Count the number of pci nodes. + * It's needed later when the interleaved liodn offsets are generated. + */ + off = fdt_node_offset_by_compatible(fdt, -1, compat); + while (off != -FDT_ERR_NOTFOUND) { + pci_cnt++; + off = fdt_node_offset_by_compatible(fdt, off, compat); + } + + for (off = fdt_node_offset_by_compatible(fdt, -1, compat); + off != -FDT_ERR_NOTFOUND; + off = fdt_node_offset_by_compatible(fdt, off, compat)) { + base_liodn = fdt_getprop(fdt, off, "fsl,liodn", &rc); + if (!base_liodn) { + char path[64]; + + if (fdt_get_path(fdt, off, path, sizeof(path)) < 0) + strcpy(path, "(unknown)"); + printf("WARNING Could not get liodn of node %s: %s\n", + path, fdt_strerror(rc)); + continue; + } + for (i = 0; i < CONFIG_SYS_MAX_PCI_EPS; i++) + liodn_offs[i + 1] = CONFIG_SYS_PCI_EP_LIODN_START + + i * pci_cnt + pci_idx - *base_liodn; + rc = fdt_setprop(fdt, off, "fsl,liodn-offset-list", + liodn_offs, sizeof(liodn_offs)); + if (rc) { + char path[64]; + + if (fdt_get_path(fdt, off, path, sizeof(path)) < 0) + strcpy(path, "(unknown)"); + printf("WARNING Unable to set fsl,liodn-offset-list for " + "node %s: %s\n", path, fdt_strerror(rc)); + continue; + } + pci_idx++; + } +} static void fdt_fixup_liodn_tbl(void *blob, struct liodn_id_table *tbl, int sz) { @@ -277,7 +333,9 @@ static void fdt_fixup_liodn_tbl(void *blob, struct liodn_id_table *tbl, int sz) void fdt_fixup_liodn(void *blob) { +#ifdef CONFIG_SYS_SRIO fdt_fixup_srio_liodn(blob, srio_liodn_tbl); +#endif fdt_fixup_liodn_tbl(blob, liodn_tbl, liodn_tbl_sz); #ifdef CONFIG_SYS_DPAA_FMAN @@ -295,4 +353,6 @@ void fdt_fixup_liodn(void *blob) #ifdef CONFIG_SYS_DPAA_RMAN fdt_fixup_liodn_tbl(blob, rman_liodn_tbl, rman_liodn_tbl_sz); #endif + + fdt_fixup_pci_liodn_offsets(blob, "fsl,qoriq-pcie-v2.4"); } diff --git a/arch/powerpc/cpu/mpc85xx/mp.c b/arch/powerpc/cpu/mpc85xx/mp.c index ffc2a9a..e1197ac 100644 --- a/arch/powerpc/cpu/mpc85xx/mp.c +++ b/arch/powerpc/cpu/mpc85xx/mp.c @@ -27,9 +27,13 @@ #include <asm/io.h> #include <asm/mmu.h> #include <asm/fsl_law.h> +#include <asm/fsl_ddr_sdram.h> #include "mp.h" DECLARE_GLOBAL_DATA_PTR; +u32 fsl_ddr_get_intl3r(void); + +extern u32 __spin_table[]; u32 get_my_id() { @@ -76,17 +80,16 @@ int cpu_status(int nr) return 0; if (nr == id) { - table = (u32 *)get_spin_virt_addr(); + table = (u32 *)&__spin_table; printf("table base @ 0x%p\n", table); } else { - table = (u32 *)get_spin_virt_addr() + nr * NUM_BOOT_ENTRY; + table = (u32 *)&__spin_table + nr * NUM_BOOT_ENTRY; printf("Running on cpu %d\n", id); printf("\n"); printf("table @ 0x%p\n", table); printf(" addr - 0x%08x\n", table[BOOT_ENTRY_ADDR_LOWER]); - printf(" pir - 0x%08x\n", table[BOOT_ENTRY_PIR]); printf(" r3 - 0x%08x\n", table[BOOT_ENTRY_R3_LOWER]); - printf(" r6 - 0x%08x\n", table[BOOT_ENTRY_R6_LOWER]); + printf(" pir - 0x%08x\n", table[BOOT_ENTRY_PIR]); } return 0; @@ -149,12 +152,11 @@ static u8 boot_entry_map[4] = { 0, BOOT_ENTRY_PIR, BOOT_ENTRY_R3_LOWER, - BOOT_ENTRY_R6_LOWER, }; int cpu_release(int nr, int argc, char * const argv[]) { - u32 i, val, *table = (u32 *)get_spin_virt_addr() + nr * NUM_BOOT_ENTRY; + u32 i, val, *table = (u32 *)&__spin_table + nr * NUM_BOOT_ENTRY; u64 boot_addr; if (hold_cores_in_reset(1)) @@ -172,8 +174,8 @@ int cpu_release(int nr, int argc, char * const argv[]) boot_addr = simple_strtoull(argv[0], NULL, 16); - /* handle pir, r3, r6 */ - for (i = 1; i < 4; i++) { + /* handle pir, r3 */ + for (i = 1; i < 3; i++) { if (argv[i][0] != '-') { u8 entry = boot_entry_map[i]; val = simple_strtoul(argv[i], NULL, 16); @@ -191,38 +193,80 @@ int cpu_release(int nr, int argc, char * const argv[]) return 0; } -u32 determine_mp_bootpg(void) +u32 determine_mp_bootpg(unsigned int *pagesize) { - /* if we have 4G or more of memory, put the boot page at 4Gb-4k */ - if ((u64)gd->ram_size > 0xfffff000) - return (0xfffff000); + u32 bootpg; +#ifdef CONFIG_SYS_FSL_ERRATUM_A004468 + u32 svr = get_svr(); + u32 granule_size, check; + struct law_entry e; +#endif - return (gd->ram_size - 4096); -} -ulong get_spin_phys_addr(void) -{ - extern ulong __secondary_start_page; - extern ulong __spin_table; + /* use last 4K of mapped memory */ + bootpg = ((gd->ram_size > CONFIG_MAX_MEM_MAPPED) ? + CONFIG_MAX_MEM_MAPPED : gd->ram_size) + + CONFIG_SYS_SDRAM_BASE - 4096; + if (pagesize) + *pagesize = 4096; + +#ifdef CONFIG_SYS_FSL_ERRATUM_A004468 +/* + * Erratum A004468 has two parts. The 3-way interleaving applies to T4240, + * to be fixed in rev 2.0. The 2-way interleaving applies to many SoCs. But + * the way boot page chosen in u-boot avoids hitting this erratum. So only + * thw workaround for 3-way interleaving is needed. + * + * To make sure boot page translation works with 3-Way DDR interleaving + * enforce a check for the following constrains + * 8K granule size requires BRSIZE=8K and + * bootpg >> log2(BRSIZE) %3 == 1 + * 4K and 1K granule size requires BRSIZE=4K and + * bootpg >> log2(BRSIZE) %3 == 0 + */ + if (SVR_SOC_VER(svr) == SVR_T4240 && SVR_MAJ(svr) < 2) { + e = find_law(bootpg); + switch (e.trgt_id) { + case LAW_TRGT_IF_DDR_INTLV_123: + granule_size = fsl_ddr_get_intl3r() & 0x1f; + if (granule_size == FSL_DDR_3WAY_8KB_INTERLEAVING) { + if (pagesize) + *pagesize = 8192; + bootpg &= 0xffffe000; /* align to 8KB */ + check = bootpg >> 13; + while ((check % 3) != 1) + check--; + bootpg = check << 13; + debug("Boot page (8K) at 0x%08x\n", bootpg); + break; + } else { + bootpg &= 0xfffff000; /* align to 4KB */ + check = bootpg >> 12; + while ((check % 3) != 0) + check--; + bootpg = check << 12; + debug("Boot page (4K) at 0x%08x\n", bootpg); + } + break; + default: + break; + } + } +#endif /* CONFIG_SYS_FSL_ERRATUM_A004468 */ - return (determine_mp_bootpg() + - (ulong)&__spin_table - (ulong)&__secondary_start_page); + return bootpg; } -ulong get_spin_virt_addr(void) +phys_addr_t get_spin_phys_addr(void) { - extern ulong __secondary_start_page; - extern ulong __spin_table; - - return (CONFIG_BPTR_VIRT_ADDR + - (ulong)&__spin_table - (ulong)&__secondary_start_page); + return virt_to_phys(&__spin_table); } #ifdef CONFIG_FSL_CORENET -static void plat_mp_up(unsigned long bootpg) +static void plat_mp_up(unsigned long bootpg, unsigned int pagesize) { - u32 cpu_up_mask, whoami; - u32 *table = (u32 *)get_spin_virt_addr(); + u32 cpu_up_mask, whoami, brsize = LAW_SIZE_4K; + u32 *table = (u32 *)&__spin_table; volatile ccsr_gur_t *gur; volatile ccsr_local_t *ccm; volatile ccsr_rcpm_t *rcpm; @@ -241,7 +285,11 @@ static void plat_mp_up(unsigned long bootpg) out_be32(&ccm->bstrl, bootpg); e = find_law(bootpg); - out_be32(&ccm->bstrar, LAW_EN | e.trgt_id << 20 | LAW_SIZE_4K); + /* pagesize is only 4K or 8K */ + if (pagesize == 8192) + brsize = LAW_SIZE_8K; + out_be32(&ccm->bstrar, LAW_EN | e.trgt_id << 20 | brsize); + debug("BRSIZE is 0x%x\n", brsize); /* readback to sync write */ in_be32(&ccm->bstrar); @@ -294,10 +342,10 @@ static void plat_mp_up(unsigned long bootpg) #endif } #else -static void plat_mp_up(unsigned long bootpg) +static void plat_mp_up(unsigned long bootpg, unsigned int pagesize) { u32 up, cpu_up_mask, whoami; - u32 *table = (u32 *)get_spin_virt_addr(); + u32 *table = (u32 *)&__spin_table; volatile u32 bpcr; volatile ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR); volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); @@ -374,27 +422,52 @@ static void plat_mp_up(unsigned long bootpg) void cpu_mp_lmb_reserve(struct lmb *lmb) { - u32 bootpg = determine_mp_bootpg(); + u32 bootpg = determine_mp_bootpg(NULL); lmb_reserve(lmb, bootpg, 4096); } void setup_mp(void) { - extern ulong __secondary_start_page; - extern ulong __bootpg_addr; - ulong fixup = (ulong)&__secondary_start_page; - u32 bootpg = determine_mp_bootpg(); + extern u32 __secondary_start_page; + extern u32 __bootpg_addr, __spin_table_addr, __second_half_boot_page; + + int i; + ulong fixup = (u32)&__secondary_start_page; + u32 bootpg, bootpg_map, pagesize; + + bootpg = determine_mp_bootpg(&pagesize); + + /* + * pagesize is only 4K or 8K + * we only use the last 4K of boot page + * bootpg_map saves the address for the boot page + * 8K is used for the workaround of 3-way DDR interleaving + */ + + bootpg_map = bootpg; + + if (pagesize == 8192) + bootpg += 4096; /* use 2nd half */ /* Some OSes expect secondary cores to be held in reset */ if (hold_cores_in_reset(0)) return; - /* Store the bootpg's SDRAM address for use by secondary CPU cores */ - __bootpg_addr = bootpg; + /* + * Store the bootpg's cache-able half address for use by secondary + * CPU cores to continue to boot + */ + __bootpg_addr = (u32)virt_to_phys(&__second_half_boot_page); + + /* Store spin table's physical address for use by secondary cores */ + __spin_table_addr = (u32)get_spin_phys_addr(); + + /* flush bootpg it before copying invalidate any staled cacheline */ + flush_cache(bootpg, 4096); /* look for the tlb covering the reset page, there better be one */ - int i = find_tlb_idx((void *)CONFIG_BPTR_VIRT_ADDR, 1); + i = find_tlb_idx((void *)CONFIG_BPTR_VIRT_ADDR, 1); /* we found a match */ if (i != -1) { @@ -407,7 +480,7 @@ void setup_mp(void) memcpy((void *)CONFIG_BPTR_VIRT_ADDR, (void *)fixup, 4096); - plat_mp_up(bootpg); + plat_mp_up(bootpg_map, pagesize); } else { puts("WARNING: No reset page TLB. " "Skipping secondary core setup\n"); diff --git a/arch/powerpc/cpu/mpc85xx/mp.h b/arch/powerpc/cpu/mpc85xx/mp.h index 87bac37..ad9950b 100644 --- a/arch/powerpc/cpu/mpc85xx/mp.h +++ b/arch/powerpc/cpu/mpc85xx/mp.h @@ -3,8 +3,7 @@ #include <asm/mp.h> -ulong get_spin_phys_addr(void); -ulong get_spin_virt_addr(void); +phys_addr_t get_spin_phys_addr(void); u32 get_my_id(void); int hold_cores_in_reset(int verbose); @@ -16,7 +15,7 @@ int hold_cores_in_reset(int verbose); #define BOOT_ENTRY_PIR 5 #define BOOT_ENTRY_R6_UPPER 6 #define BOOT_ENTRY_R6_LOWER 7 -#define NUM_BOOT_ENTRY 8 +#define NUM_BOOT_ENTRY 16 /* pad to 64 bytes */ #define SIZE_BOOT_ENTRY (NUM_BOOT_ENTRY * sizeof(u32)) #endif diff --git a/arch/powerpc/cpu/mpc85xx/p5040_ids.c b/arch/powerpc/cpu/mpc85xx/p5040_ids.c new file mode 100644 index 0000000..878ee3e --- /dev/null +++ b/arch/powerpc/cpu/mpc85xx/p5040_ids.c @@ -0,0 +1,127 @@ +/* + * Copyright 2010-2011 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/fsl_portals.h> +#include <asm/fsl_liodn.h> + +#ifdef CONFIG_SYS_DPAA_QBMAN +struct qportal_info qp_info[CONFIG_SYS_QMAN_NUM_PORTALS] = { + /* dqrr liodn, frame data liodn, liodn off, sdest */ + SET_QP_INFO(1, 2, 1, 0), + SET_QP_INFO(3, 4, 2, 1), + SET_QP_INFO(5, 6, 3, 2), + SET_QP_INFO(7, 8, 4, 3), + SET_QP_INFO(9, 10, 5, 0), + SET_QP_INFO(11, 12, 6, 1), + SET_QP_INFO(13, 14, 7, 2), + SET_QP_INFO(15, 16, 8, 3), + SET_QP_INFO(17, 18, 9, 0), /* for now, set sdest to 0 */ + SET_QP_INFO(19, 20, 10, 0), /* for now, set sdest to 0 */ +}; +#endif + +struct liodn_id_table liodn_tbl[] = { +#ifdef CONFIG_SYS_DPAA_QBMAN + SET_QMAN_LIODN(31), + SET_BMAN_LIODN(32), +#endif + + SET_SDHC_LIODN(1, 64), + + SET_USB_LIODN(1, "fsl-usb2-mph", 93), + SET_USB_LIODN(2, "fsl-usb2-dr", 94), + + SET_SATA_LIODN(1, 95), + SET_SATA_LIODN(2, 96), + + SET_PCI_LIODN_BASE(CONFIG_SYS_FSL_PCIE_COMPAT, 1, 195), + SET_PCI_LIODN_BASE(CONFIG_SYS_FSL_PCIE_COMPAT, 2, 196), + SET_PCI_LIODN_BASE(CONFIG_SYS_FSL_PCIE_COMPAT, 3, 197), + + SET_DMA_LIODN(1, 193), + SET_DMA_LIODN(2, 194), +}; +int liodn_tbl_sz = ARRAY_SIZE(liodn_tbl); + +#ifdef CONFIG_SYS_DPAA_FMAN +struct liodn_id_table fman1_liodn_tbl[] = { + SET_FMAN_RX_1G_LIODN(1, 0, 6), + SET_FMAN_RX_1G_LIODN(1, 1, 7), + SET_FMAN_RX_1G_LIODN(1, 2, 8), + SET_FMAN_RX_1G_LIODN(1, 3, 9), + SET_FMAN_RX_1G_LIODN(1, 4, 10), + SET_FMAN_RX_10G_LIODN(1, 0, 11), +}; +int fman1_liodn_tbl_sz = ARRAY_SIZE(fman1_liodn_tbl); + +#if (CONFIG_SYS_NUM_FMAN == 2) +struct liodn_id_table fman2_liodn_tbl[] = { + SET_FMAN_RX_1G_LIODN(2, 0, 12), + SET_FMAN_RX_1G_LIODN(2, 1, 13), + SET_FMAN_RX_1G_LIODN(2, 2, 14), + SET_FMAN_RX_1G_LIODN(2, 3, 15), + SET_FMAN_RX_1G_LIODN(2, 4, 16), + SET_FMAN_RX_10G_LIODN(2, 0, 17), +}; +int fman2_liodn_tbl_sz = ARRAY_SIZE(fman2_liodn_tbl); +#endif +#endif + +struct liodn_id_table sec_liodn_tbl[] = { + SET_SEC_JR_LIODN_ENTRY(0, 129, 130), + SET_SEC_JR_LIODN_ENTRY(1, 131, 132), + SET_SEC_JR_LIODN_ENTRY(2, 133, 134), + SET_SEC_JR_LIODN_ENTRY(3, 135, 136), + SET_SEC_RTIC_LIODN_ENTRY(a, 89), + SET_SEC_RTIC_LIODN_ENTRY(b, 90), + SET_SEC_RTIC_LIODN_ENTRY(c, 91), + SET_SEC_RTIC_LIODN_ENTRY(d, 92), + SET_SEC_DECO_LIODN_ENTRY(0, 139, 140), + SET_SEC_DECO_LIODN_ENTRY(1, 141, 142), + SET_SEC_DECO_LIODN_ENTRY(2, 143, 144), + SET_SEC_DECO_LIODN_ENTRY(3, 145, 146), +}; +int sec_liodn_tbl_sz = ARRAY_SIZE(sec_liodn_tbl); + +#ifdef CONFIG_SYS_FSL_RAID_ENGINE +struct liodn_id_table raide_liodn_tbl[] = { + SET_RAID_ENGINE_JQ_LIODN_ENTRY(0, 0, 60), + SET_RAID_ENGINE_JQ_LIODN_ENTRY(0, 1, 61), + SET_RAID_ENGINE_JQ_LIODN_ENTRY(1, 0, 62), + SET_RAID_ENGINE_JQ_LIODN_ENTRY(1, 1, 63), +}; +int raide_liodn_tbl_sz = ARRAY_SIZE(raide_liodn_tbl); +#endif + +struct liodn_id_table liodn_bases[] = { + [FSL_HW_PORTAL_SEC] = SET_LIODN_BASE_2(64, 101), +#ifdef CONFIG_SYS_DPAA_FMAN + [FSL_HW_PORTAL_FMAN1] = SET_LIODN_BASE_1(32), +#endif +#if (CONFIG_SYS_NUM_FMAN == 2) + [FSL_HW_PORTAL_FMAN2] = SET_LIODN_BASE_1(160), +#endif +#ifdef CONFIG_SYS_FSL_RAID_ENGINE + [FSL_HW_PORTAL_RAID_ENGINE] = SET_LIODN_BASE_1(49), +#endif +}; diff --git a/arch/powerpc/cpu/mpc85xx/p5040_serdes.c b/arch/powerpc/cpu/mpc85xx/p5040_serdes.c new file mode 100644 index 0000000..890b88e --- /dev/null +++ b/arch/powerpc/cpu/mpc85xx/p5040_serdes.c @@ -0,0 +1,117 @@ +/* + * Copyright 2009-2011 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/fsl_serdes.h> +#include <asm/processor.h> +#include <asm/io.h> +#include "fsl_corenet_serdes.h" + +/* + * Note: For P5040, the fourth SerDes bank (with two lanes) is on SerDes2, but + * U-boot only supports one SerDes controller. Therefore, we ignore bank 4 in + * this table. This works because most of the SerDes code is for errata + * work-arounds, and there are no P5040 errata that effect bank 4. + */ + +static u8 serdes_cfg_tbl[][SRDS_MAX_LANES] = { + [0x00] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, PCIE2, PCIE2, + SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4, SGMII_FM1_DTSEC1, + SGMII_FM1_DTSEC2, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, + XAUI_FM2, XAUI_FM2, XAUI_FM2, XAUI_FM2, /* SATA1, SATA2, */ }, + [0x01] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, PCIE2, PCIE2, + SGMII_FM1_DTSEC3, SGMII_FM2_DTSEC4, XAUI_FM1, XAUI_FM1, + XAUI_FM1, XAUI_FM1, XAUI_FM2, XAUI_FM2, XAUI_FM2, + XAUI_FM2, /* SATA1, SATA2 */ }, + [0x02] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, SGMII_FM1_DTSEC3, + SGMII_FM1_DTSEC4, SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4, + XAUI_FM1, XAUI_FM1, XAUI_FM1, XAUI_FM1, XAUI_FM2, XAUI_FM2, + XAUI_FM2, XAUI_FM2, /* SATA1, SATA2 */ }, + [0x03] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, SGMII_FM2_DTSEC1, + SGMII_FM2_DTSEC2, SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4, + SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, SGMII_FM1_DTSEC3, + SGMII_FM1_DTSEC4, XAUI_FM2, XAUI_FM2, XAUI_FM2, XAUI_FM2, + /* SATA1, SATA2 */ }, + [0x04] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE3, SGMII_FM2_DTSEC1, + SGMII_FM2_DTSEC2, SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4, + SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, SGMII_FM1_DTSEC3, + SGMII_FM1_DTSEC4, XAUI_FM2, XAUI_FM2, XAUI_FM2, XAUI_FM2, + /* SATA1, SATA2 */ }, + [0x05] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE3, SGMII_FM1_DTSEC3, + SGMII_FM1_DTSEC4, SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4, + XAUI_FM1, XAUI_FM1, XAUI_FM1, XAUI_FM1, XAUI_FM2, XAUI_FM2, + XAUI_FM2, XAUI_FM2, /* SATA1, SATA2 */ }, + [0x06] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, + SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4, SGMII_FM1_DTSEC1, + SGMII_FM1_DTSEC2, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, + XAUI_FM2, XAUI_FM2, XAUI_FM2, XAUI_FM2, /* SATA1, SATA2 */ }, + [0x07] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, + SGMII_FM1_DTSEC3, SGMII_FM2_DTSEC4, XAUI_FM1, XAUI_FM1, + XAUI_FM1, XAUI_FM1, XAUI_FM2, XAUI_FM2, XAUI_FM2, + XAUI_FM2, /* SATA1, SATA2 */ }, + [0x11] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, PCIE2, PCIE2, + AURORA, AURORA, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, NONE, NONE, SATA1, SATA2, + /* NONE, NONE */ }, + [0x15] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, PCIE2, PCIE2, + AURORA, AURORA, XAUI_FM1, XAUI_FM1, XAUI_FM1, XAUI_FM1, + NONE, NONE, SATA1, SATA2, /* NONE, NONE */ }, + [0x2a] = {PCIE1, PCIE1, PCIE3, PCIE3, PCIE2, PCIE2, PCIE2, PCIE2, + AURORA, AURORA, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, XAUI_FM2, XAUI_FM2, + XAUI_FM2, XAUI_FM2, /* NONE, NONE */ }, + [0x34] = {PCIE1, PCIE1, PCIE1, PCIE1, SGMII_FM1_DTSEC1, + SGMII_FM1_DTSEC2, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, AURORA, + AURORA, XAUI_FM1, XAUI_FM1, XAUI_FM1, XAUI_FM1, NONE, + NONE, SATA1, SATA2, /* NONE, NONE */ }, + [0x35] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, + SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, AURORA, AURORA, XAUI_FM1, + XAUI_FM1, XAUI_FM1, XAUI_FM1, NONE, NONE, SATA1, SATA2, + /* NONE, NONE */ }, + [0x36] = {PCIE1, PCIE1, PCIE3, PCIE3, SGMII_FM1_DTSEC1, + SGMII_FM1_DTSEC2, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, AURORA, + AURORA, XAUI_FM1, XAUI_FM1, XAUI_FM1, XAUI_FM1, NONE, + NONE, SATA1, SATA2, /* NONE, NONE */ }, +}; + +enum srds_prtcl serdes_get_prtcl(int cfg, int lane) +{ + if (!serdes_lane_enabled(lane)) + return NONE; + + return serdes_cfg_tbl[cfg][lane]; +} + +int is_serdes_prtcl_valid(u32 prtcl) +{ + int i; + + if (prtcl > ARRAY_SIZE(serdes_cfg_tbl)) + return 0; + + for (i = 0; i < SRDS_MAX_LANES; i++) { + if (serdes_cfg_tbl[prtcl][i] != NONE) + return 1; + } + + return 0; +} diff --git a/arch/powerpc/cpu/mpc85xx/portals.c b/arch/powerpc/cpu/mpc85xx/portals.c index 6199633..b59ef69 100644 --- a/arch/powerpc/cpu/mpc85xx/portals.c +++ b/arch/powerpc/cpu/mpc85xx/portals.c @@ -182,14 +182,18 @@ void fdt_fixup_qportals(void *blob) { int off, err; unsigned int maj, min; + unsigned int ip_cfg; u32 rev_1 = in_be32(&qman->ip_rev_1); + u32 rev_2 = in_be32(&qman->ip_rev_2); char compat[64]; int compat_len; maj = (rev_1 >> 8) & 0xff; min = rev_1 & 0xff; + ip_cfg = rev_2 & 0xff; - compat_len = sprintf(compat, "fsl,qman-portal-%u.%u", maj, min) + 1; + compat_len = sprintf(compat, "fsl,qman-portal-%u.%u.%u", + maj, min, ip_cfg) + 1; compat_len += sprintf(compat + compat_len, "fsl,qman-portal") + 1; off = fdt_node_offset_by_compatible(blob, -1, "fsl,qman-portal"); @@ -267,14 +271,19 @@ void fdt_fixup_bportals(void *blob) { int off, err; unsigned int maj, min; + unsigned int ip_cfg; u32 rev_1 = in_be32(&bman->ip_rev_1); + u32 rev_2 = in_be32(&bman->ip_rev_2); char compat[64]; int compat_len; maj = (rev_1 >> 8) & 0xff; min = rev_1 & 0xff; - compat_len = sprintf(compat, "fsl,bman-portal-%u.%u", maj, min) + 1; + ip_cfg = rev_2 & 0xff; + + compat_len = sprintf(compat, "fsl,bman-portal-%u.%u.%u", + maj, min, ip_cfg) + 1; compat_len += sprintf(compat + compat_len, "fsl,bman-portal") + 1; off = fdt_node_offset_by_compatible(blob, -1, "fsl,bman-portal"); diff --git a/arch/powerpc/cpu/mpc85xx/release.S b/arch/powerpc/cpu/mpc85xx/release.S index 22e73e0..4ba44a9 100644 --- a/arch/powerpc/cpu/mpc85xx/release.S +++ b/arch/powerpc/cpu/mpc85xx/release.S @@ -150,29 +150,33 @@ __secondary_start_page: #define toreset(x) (x - __secondary_start_page + 0xfffff000) /* get our PIR to figure out our table entry */ - lis r3,toreset(__spin_table)@h - ori r3,r3,toreset(__spin_table)@l + lis r3,toreset(__spin_table_addr)@h + ori r3,r3,toreset(__spin_table_addr)@l + lwz r3,0(r3) - /* r10 has the base address for the entry */ + /* + * r10 has the base address for the entry. + * we cannot access it yet before setting up a new TLB + */ mfspr r0,SPRN_PIR #if defined(CONFIG_E6500) /* * PIR definition for E6500 * 0-17 Reserved (logic 0s) - * 8-19 CHIP_ID, 2’b00 - SoC 1 + * 8-19 CHIP_ID, 2'b00 - SoC 1 * all others - reserved - * 20-24 CLUSTER_ID 5’b00000 - CCM 1 + * 20-24 CLUSTER_ID 5'b00000 - CCM 1 * all others - reserved - * 25-26 CORE_CLUSTER_ID 2’b00 - cluster 1 - * 2’b01 - cluster 2 - * 2’b10 - cluster 3 - * 2’b11 - cluster 4 - * 27-28 CORE_ID 2’b00 - core 0 - * 2’b01 - core 1 - * 2’b10 - core 2 - * 2’b11 - core 3 - * 29-31 THREAD_ID 3’b000 - thread 0 - * 3’b001 - thread 1 + * 25-26 CORE_CLUSTER_ID 2'b00 - cluster 1 + * 2'b01 - cluster 2 + * 2'b10 - cluster 3 + * 2'b11 - cluster 4 + * 27-28 CORE_ID 2'b00 - core 0 + * 2'b01 - core 1 + * 2'b10 - core 2 + * 2'b11 - core 3 + * 29-31 THREAD_ID 3'b000 - thread 0 + * 3'b001 - thread 1 */ rlwinm r4,r0,29,25,31 #elif defined(CONFIG_E500MC) @@ -180,16 +184,9 @@ __secondary_start_page: #else mr r4,r0 #endif - slwi r8,r4,5 + slwi r8,r4,6 /* spin table is padded to 64 byte */ add r10,r3,r8 -#if defined(CONFIG_E500MC) && defined(CONFIG_SYS_CACHE_STASHING) - /* set stash id to (coreID) * 2 + 32 + L1 CT (0) */ - slwi r8,r4,1 - addi r8,r8,32 - mtspr L1CSR2,r8 -#endif - #ifdef CONFIG_E6500 mfspr r0,SPRN_PIR /* @@ -209,6 +206,13 @@ __secondary_start_page: mtspr SPRN_PIR,r4 /* write to PIR register */ +#ifdef CONFIG_SYS_CACHE_STASHING + /* set stash id to (coreID) * 2 + 32 + L1 CT (0) */ + slwi r8,r4,1 + addi r8,r8,32 + mtspr L1CSR2,r8 +#endif + #if defined(CONFIG_SYS_P4080_ERRATUM_CPU22) || \ defined(CONFIG_SYS_FSL_ERRATUM_NMG_CPU_A011) /* @@ -277,73 +281,111 @@ __secondary_start_page: beq 2b #endif 3: - -#define EPAPR_MAGIC (0x45504150) -#define ENTRY_ADDR_UPPER 0 -#define ENTRY_ADDR_LOWER 4 -#define ENTRY_R3_UPPER 8 -#define ENTRY_R3_LOWER 12 -#define ENTRY_RESV 16 -#define ENTRY_PIR 20 -#define ENTRY_R6_UPPER 24 -#define ENTRY_R6_LOWER 28 -#define ENTRY_SIZE 32 - - /* setup the entry */ - li r3,0 - li r8,1 - stw r4,ENTRY_PIR(r10) - stw r3,ENTRY_ADDR_UPPER(r10) - stw r8,ENTRY_ADDR_LOWER(r10) - stw r3,ENTRY_R3_UPPER(r10) - stw r4,ENTRY_R3_LOWER(r10) - stw r3,ENTRY_R6_UPPER(r10) - stw r3,ENTRY_R6_LOWER(r10) - - /* load r13 with the address of the 'bootpg' in SDRAM */ - lis r13,toreset(__bootpg_addr)@h - ori r13,r13,toreset(__bootpg_addr)@l + /* setup mapping for the spin table, WIMGE=0b00100 */ + lis r13,toreset(__spin_table_addr)@h + ori r13,r13,toreset(__spin_table_addr)@l lwz r13,0(r13) + /* mask by 4K */ + rlwinm r13,r13,0,0,19 - /* setup mapping for AS = 1, and jump there */ lis r11,(MAS0_TLBSEL(1)|MAS0_ESEL(1))@h mtspr SPRN_MAS0,r11 lis r11,(MAS1_VALID|MAS1_IPROT)@h ori r11,r11,(MAS1_TS|MAS1_TSIZE(BOOKE_PAGESZ_4K))@l mtspr SPRN_MAS1,r11 - oris r11,r13,(MAS2_I|MAS2_G)@h - ori r11,r13,(MAS2_I|MAS2_G)@l + oris r11,r13,(MAS2_M|MAS2_G)@h + ori r11,r13,(MAS2_M|MAS2_G)@l mtspr SPRN_MAS2,r11 oris r11,r13,(MAS3_SX|MAS3_SW|MAS3_SR)@h ori r11,r13,(MAS3_SX|MAS3_SW|MAS3_SR)@l mtspr SPRN_MAS3,r11 + li r11,0 + mtspr SPRN_MAS7,r11 tlbwe - bl 1f -1: mflr r11 /* - * OR in 0xfff to create a mask of the bootpg SDRAM address. We use - * this mask to fixup the cpu spin table and the address that we want - * to jump to, eg change them from 0xfffffxxx to 0x7ffffxxx if the - * bootpg is at 0x7ffff000 in SDRAM. + * __bootpg_addr has the address of __second_half_boot_page + * jump there in AS=1 space with cache enabled */ - ori r13,r13,0xfff - and r11, r11, r13 - and r10, r10, r13 - - addi r11,r11,(2f-1b) + lis r13,toreset(__bootpg_addr)@h + ori r13,r13,toreset(__bootpg_addr)@l + lwz r11,0(r13) + mtspr SPRN_SRR0,r11 mfmsr r13 ori r12,r13,MSR_IS|MSR_DS@l - - mtspr SPRN_SRR0,r11 mtspr SPRN_SRR1,r12 rfi + /* + * Allocate some space for the SDRAM address of the bootpg. + * This variable has to be in the boot page so that it can + * be accessed by secondary cores when they come out of reset. + */ + .align L1_CACHE_SHIFT + .globl __bootpg_addr +__bootpg_addr: + .long 0 + + .global __spin_table_addr +__spin_table_addr: + .long 0 + + /* + * This variable is set by cpu_init_r() after parsing hwconfig + * to enable workaround for erratum NMG_CPU_A011. + */ + .align L1_CACHE_SHIFT + .global enable_cpu_a011_workaround +enable_cpu_a011_workaround: + .long 1 + + /* Fill in the empty space. The actual reset vector is + * the last word of the page */ +__secondary_start_code_end: + .space 4092 - (__secondary_start_code_end - __secondary_start_page) +__secondary_reset_vector: + b __secondary_start_page + + +/* this is a separated page for the spin table and cacheable boot code */ + .align L1_CACHE_SHIFT + .global __second_half_boot_page +__second_half_boot_page: +#define EPAPR_MAGIC 0x45504150 +#define ENTRY_ADDR_UPPER 0 +#define ENTRY_ADDR_LOWER 4 +#define ENTRY_R3_UPPER 8 +#define ENTRY_R3_LOWER 12 +#define ENTRY_RESV 16 +#define ENTRY_PIR 20 +#define ENTRY_SIZE 64 + /* + * setup the entry + * r10 has the base address of the spin table. + * spin table is defined as + * struct { + * uint64_t entry_addr; + * uint64_t r3; + * uint32_t rsvd1; + * uint32_t pir; + * }; + * we pad this struct to 64 bytes so each entry is in its own cacheline + */ + li r3,0 + li r8,1 + mfspr r4,SPRN_PIR + stw r3,ENTRY_ADDR_UPPER(r10) + stw r3,ENTRY_R3_UPPER(r10) + stw r4,ENTRY_R3_LOWER(r10) + stw r3,ENTRY_RESV(r10) + stw r4,ENTRY_PIR(r10) + msync + stw r8,ENTRY_ADDR_LOWER(r10) + /* spin waiting for addr */ -2: - lwz r4,ENTRY_ADDR_LOWER(r10) +3: lwz r4,ENTRY_ADDR_LOWER(r10) andi. r11,r4,1 - bne 2b + bne 3b isync /* setup IVORs to match fixed offsets */ @@ -362,11 +404,20 @@ __secondary_start_page: /* mask by ~64M to setup our tlb we will jump to */ rlwinm r12,r4,0,0,5 - /* setup r3, r4, r5, r6, r7, r8, r9 */ + /* + * setup r3, r4, r5, r6, r7, r8, r9 + * r3 contains the value to put in the r3 register at secondary cpu + * entry. The high 32-bits are ignored on 32-bit chip implementations. + * 64-bit chip implementations however shall load all 64-bits + */ +#ifdef CONFIG_SYS_PPC64 + ld r3,ENTRY_R3_UPPER(r10) +#else lwz r3,ENTRY_R3_LOWER(r10) +#endif li r4,0 li r5,0 - lwz r6,ENTRY_R6_LOWER(r10) + li r6,0 lis r7,(64*1024*1024)@h li r8,0 li r9,0 @@ -404,32 +455,10 @@ __secondary_start_page: mtspr SPRN_SRR1,r13 rfi - /* - * Allocate some space for the SDRAM address of the bootpg. - * This variable has to be in the boot page so that it can - * be accessed by secondary cores when they come out of reset. - */ - .globl __bootpg_addr -__bootpg_addr: - .long 0 - .align L1_CACHE_SHIFT + .align 6 .globl __spin_table __spin_table: .space CONFIG_MAX_CPUS*ENTRY_SIZE - - /* - * This variable is set by cpu_init_r() after parsing hwconfig - * to enable workaround for erratum NMG_CPU_A011. - */ - .align L1_CACHE_SHIFT - .global enable_cpu_a011_workaround -enable_cpu_a011_workaround: - .long 1 - - /* Fill in the empty space. The actual reset vector is - * the last word of the page */ -__secondary_start_code_end: - .space 4092 - (__secondary_start_code_end - __secondary_start_page) -__secondary_reset_vector: - b __secondary_start_page +__spin_table_end: + .space 4096 - (__spin_table_end - __spin_table) diff --git a/arch/powerpc/cpu/mpc85xx/speed.c b/arch/powerpc/cpu/mpc85xx/speed.c index abfeb26..801ee07 100644 --- a/arch/powerpc/cpu/mpc85xx/speed.c +++ b/arch/powerpc/cpu/mpc85xx/speed.c @@ -39,6 +39,10 @@ DECLARE_GLOBAL_DATA_PTR; void get_sys_info (sys_info_t * sysInfo) { volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); +#ifdef CONFIG_FSL_IFC + struct fsl_ifc *ifc_regs = (void *)CONFIG_SYS_IFC_ADDR; + u32 ccr; +#endif #ifdef CONFIG_FSL_CORENET volatile ccsr_clk_t *clk = (void *)(CONFIG_SYS_FSL_CORENET_CLK_ADDR); unsigned int cpu; @@ -72,16 +76,22 @@ void get_sys_info (sys_info_t * sysInfo) [13] = 2, /* CC4 PPL / 2 */ [14] = 4, /* CC4 PPL / 4 */ }; - uint lcrr_div, i, freqCC_PLL[4], rcw_tmp; - uint ratio[4]; + uint i, freqCC_PLL[6], rcw_tmp; + uint ratio[6]; unsigned long sysclk = CONFIG_SYS_CLK_FREQ; uint mem_pll_rat; sysInfo->freqSystemBus = sysclk; +#ifdef CONFIG_DDR_CLK_FREQ + sysInfo->freqDDRBus = CONFIG_DDR_CLK_FREQ; +#else sysInfo->freqDDRBus = sysclk; +#endif sysInfo->freqSystemBus *= (in_be32(&gur->rcwsr[0]) >> 25) & 0x1f; - mem_pll_rat = (in_be32(&gur->rcwsr[0]) >> 17) & 0x1f; + mem_pll_rat = (in_be32(&gur->rcwsr[0]) >> + FSL_CORENET_RCWSR0_MEM_PLL_RAT_SHIFT) + & FSL_CORENET_RCWSR0_MEM_PLL_RAT_MASK; if (mem_pll_rat > 2) sysInfo->freqDDRBus *= mem_pll_rat; else @@ -91,27 +101,151 @@ void get_sys_info (sys_info_t * sysInfo) ratio[1] = (in_be32(&clk->pllc2gsr) >> 1) & 0x3f; ratio[2] = (in_be32(&clk->pllc3gsr) >> 1) & 0x3f; ratio[3] = (in_be32(&clk->pllc4gsr) >> 1) & 0x3f; - for (i = 0; i < 4; i++) { + ratio[4] = (in_be32(&clk->pllc5gsr) >> 1) & 0x3f; + ratio[5] = (in_be32(&clk->pllc6gsr) >> 1) & 0x3f; + for (i = 0; i < 6; i++) { if (ratio[i] > 4) freqCC_PLL[i] = sysclk * ratio[i]; else freqCC_PLL[i] = sysInfo->freqSystemBus * ratio[i]; } - rcw_tmp = in_be32(&gur->rcwsr[3]); +#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2 + /* + * Each cluster has up to 4 cores, sharing the same PLL selection. + * The cluster assignment is fixed per SoC. There is no way identify the + * assignment so far, presuming the "first configuration" which is to + * fill the lower cluster group first before moving up to next group. + * PLL1, PLL2, PLL3 are cluster group A, feeding core 0~3 on cluster 1 + * and core 4~7 on cluster 2 + * PLL4, PLL5, PLL6 are cluster group B, feeding core 8~11 on cluster 3 + * and core 12~15 on cluster 4 if existing + */ for_each_cpu(i, cpu, cpu_numcores(), cpu_mask()) { - u32 c_pll_sel = (in_be32(&clk->clkc0csr + cpu*8) >> 27) & 0xf; + u32 c_pll_sel = (in_be32(&clk->clkc0csr + (cpu / 4) * 8) >> 27) + & 0xf; u32 cplx_pll = core_cplx_PLL[c_pll_sel]; + if (cplx_pll > 3) + printf("Unsupported architecture configuration" + " in function %s\n", __func__); + cplx_pll += (cpu / 8) * 3; sysInfo->freqProcessor[cpu] = freqCC_PLL[cplx_pll] / core_cplx_PLL_div[c_pll_sel]; } +#define PME_CLK_SEL 0xe0000000 +#define PME_CLK_SHIFT 29 +#define FM1_CLK_SEL 0x1c000000 +#define FM1_CLK_SHIFT 26 + rcw_tmp = in_be32(&gur->rcwsr[7]); + +#ifdef CONFIG_SYS_DPAA_PME + switch ((rcw_tmp & PME_CLK_SEL) >> PME_CLK_SHIFT) { + case 1: + sysInfo->freqPME = freqCC_PLL[0]; + break; + case 2: + sysInfo->freqPME = freqCC_PLL[0] / 2; + break; + case 3: + sysInfo->freqPME = freqCC_PLL[0] / 3; + break; + case 4: + sysInfo->freqPME = freqCC_PLL[0] / 4; + break; + case 6: + sysInfo->freqPME = freqCC_PLL[1] / 2; + break; + case 7: + sysInfo->freqPME = freqCC_PLL[1] / 3; + break; + default: + printf("Error: Unknown PME clock select!\n"); + case 0: + sysInfo->freqPME = sysInfo->freqSystemBus / 2; + break; + } +#endif + +#ifdef CONFIG_SYS_DPAA_QBMAN + sysInfo->freqQMAN = sysInfo->freqSystemBus / 2; +#endif + +#ifdef CONFIG_SYS_DPAA_FMAN + switch ((rcw_tmp & FM1_CLK_SEL) >> FM1_CLK_SHIFT) { + case 1: + sysInfo->freqFMan[0] = freqCC_PLL[3]; + break; + case 2: + sysInfo->freqFMan[0] = freqCC_PLL[3] / 2; + break; + case 3: + sysInfo->freqFMan[0] = freqCC_PLL[3] / 3; + break; + case 4: + sysInfo->freqFMan[0] = freqCC_PLL[3] / 4; + break; + case 6: + sysInfo->freqFMan[0] = freqCC_PLL[4] / 2; + break; + case 7: + sysInfo->freqFMan[0] = freqCC_PLL[4] / 3; + break; + default: + printf("Error: Unknown FMan1 clock select!\n"); + case 0: + sysInfo->freqFMan[0] = sysInfo->freqSystemBus / 2; + break; + } +#if (CONFIG_SYS_NUM_FMAN) == 2 +#define FM2_CLK_SEL 0x00000038 +#define FM2_CLK_SHIFT 3 + rcw_tmp = in_be32(&gur->rcwsr[15]); + switch ((rcw_tmp & FM2_CLK_SEL) >> FM2_CLK_SHIFT) { + case 1: + sysInfo->freqFMan[1] = freqCC_PLL[4]; + break; + case 2: + sysInfo->freqFMan[1] = freqCC_PLL[4] / 2; + break; + case 3: + sysInfo->freqFMan[1] = freqCC_PLL[4] / 3; + break; + case 4: + sysInfo->freqFMan[1] = freqCC_PLL[4] / 4; + break; + case 6: + sysInfo->freqFMan[1] = freqCC_PLL[3] / 2; + break; + case 7: + sysInfo->freqFMan[1] = freqCC_PLL[3] / 3; + break; + default: + printf("Error: Unknown FMan2 clock select!\n"); + case 0: + sysInfo->freqFMan[1] = sysInfo->freqSystemBus / 2; + break; + } +#endif /* CONFIG_SYS_NUM_FMAN == 2 */ +#endif /* CONFIG_SYS_DPAA_FMAN */ + +#else /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */ + + for_each_cpu(i, cpu, cpu_numcores(), cpu_mask()) { + u32 c_pll_sel = (in_be32(&clk->clkc0csr + cpu*8) >> 27) & 0xf; + u32 cplx_pll = core_cplx_PLL[c_pll_sel]; + + sysInfo->freqProcessor[cpu] = + freqCC_PLL[cplx_pll] / core_cplx_PLL_div[c_pll_sel]; + } #define PME_CLK_SEL 0x80000000 #define FM1_CLK_SEL 0x40000000 #define FM2_CLK_SEL 0x20000000 #define HWA_ASYNC_DIV 0x04000000 #if (CONFIG_SYS_FSL_NUM_CC_PLLS == 2) #define HWA_CC_PLL 1 +#elif (CONFIG_SYS_FSL_NUM_CC_PLLS == 3) +#define HWA_CC_PLL 2 #elif (CONFIG_SYS_FSL_NUM_CC_PLLS == 4) #define HWA_CC_PLL 2 #else @@ -151,11 +285,10 @@ void get_sys_info (sys_info_t * sysInfo) #endif #endif -#else - uint plat_ratio,e500_ratio,half_freqSystemBus; -#if defined(CONFIG_FSL_LBC) - uint lcrr_div; -#endif +#endif /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */ + +#else /* CONFIG_FSL_CORENET */ + uint plat_ratio, e500_ratio, half_freqSystemBus; int i; #ifdef CONFIG_QE __maybe_unused u32 qe_ratio; @@ -202,6 +335,7 @@ void get_sys_info (sys_info_t * sysInfo) #endif /* CONFIG_FSL_CORENET */ #if defined(CONFIG_FSL_LBC) + uint lcrr_div; #if defined(CONFIG_SYS_LBC_LCRR) /* We will program LCRR to this value later */ lcrr_div = CONFIG_SYS_LBC_LCRR & LCRR_CLKDIV; @@ -228,6 +362,13 @@ void get_sys_info (sys_info_t * sysInfo) sysInfo->freqLocalBus = lcrr_div; } #endif + +#if defined(CONFIG_FSL_IFC) + ccr = in_be32(&ifc_regs->ifc_ccr); + ccr = ((ccr & IFC_CCR_CLK_DIV_MASK) >> IFC_CCR_CLK_DIV_SHIFT) + 1; + + sysInfo->freqLocalBus = sysInfo->freqSystemBus / ccr; +#endif } diff --git a/arch/powerpc/cpu/mpc85xx/start.S b/arch/powerpc/cpu/mpc85xx/start.S index 9e04257..ac17f9d 100644 --- a/arch/powerpc/cpu/mpc85xx/start.S +++ b/arch/powerpc/cpu/mpc85xx/start.S @@ -169,7 +169,7 @@ l2_disabled: * */ -#if defined(CONFIG_E500MC) && defined(CONFIG_SYS_CACHE_STASHING) +#ifdef CONFIG_SYS_CACHE_STASHING /* set stash id to (coreID) * 2 + 32 + L1 CT (0) */ li r2,(32 + 0) mtspr L1CSR2,r2 @@ -211,6 +211,77 @@ l2_disabled: andi. r1,r3,L1CSR0_DCE@l beq 2b + .macro create_tlb1_entry esel ts tsize epn wimg rpn perm phy_high scratch + lis \scratch, FSL_BOOKE_MAS0(1, \esel, 0)@h + ori \scratch, \scratch, FSL_BOOKE_MAS0(1, \esel, 0)@l + mtspr MAS0, \scratch + lis \scratch, FSL_BOOKE_MAS1(1, 1, 0, \ts, \tsize)@h + ori \scratch, \scratch, FSL_BOOKE_MAS1(1, 1, 0, \ts, \tsize)@l + mtspr MAS1, \scratch + lis \scratch, FSL_BOOKE_MAS2(\epn, \wimg)@h + ori \scratch, \scratch, FSL_BOOKE_MAS2(\epn, \wimg)@l + mtspr MAS2, \scratch + lis \scratch, FSL_BOOKE_MAS3(\rpn, 0, \perm)@h + ori \scratch, \scratch, FSL_BOOKE_MAS3(\rpn, 0, \perm)@l + mtspr MAS3, \scratch + lis \scratch, \phy_high@h + ori \scratch, \scratch, \phy_high@l + mtspr MAS7, \scratch + isync + msync + tlbwe + isync + .endm + + .macro create_tlb0_entry esel ts tsize epn wimg rpn perm phy_high scratch + lis \scratch, FSL_BOOKE_MAS0(0, \esel, 0)@h + ori \scratch, \scratch, FSL_BOOKE_MAS0(0, \esel, 0)@l + mtspr MAS0, \scratch + lis \scratch, FSL_BOOKE_MAS1(1, 0, 0, \ts, \tsize)@h + ori \scratch, \scratch, FSL_BOOKE_MAS1(1, 0, 0, \ts, \tsize)@l + mtspr MAS1, \scratch + lis \scratch, FSL_BOOKE_MAS2(\epn, \wimg)@h + ori \scratch, \scratch, FSL_BOOKE_MAS2(\epn, \wimg)@l + mtspr MAS2, \scratch + lis \scratch, FSL_BOOKE_MAS3(\rpn, 0, \perm)@h + ori \scratch, \scratch, FSL_BOOKE_MAS3(\rpn, 0, \perm)@l + mtspr MAS3, \scratch + lis \scratch, \phy_high@h + ori \scratch, \scratch, \phy_high@l + mtspr MAS7, \scratch + isync + msync + tlbwe + isync + .endm + + .macro delete_tlb1_entry esel scratch + lis \scratch, FSL_BOOKE_MAS0(1, \esel, 0)@h + ori \scratch, \scratch, FSL_BOOKE_MAS0(1, \esel, 0)@l + mtspr MAS0, \scratch + li \scratch, 0 + mtspr MAS1, \scratch + isync + msync + tlbwe + isync + .endm + + .macro delete_tlb0_entry esel epn wimg scratch + lis \scratch, FSL_BOOKE_MAS0(0, \esel, 0)@h + ori \scratch, \scratch, FSL_BOOKE_MAS0(0, \esel, 0)@l + mtspr MAS0, \scratch + li \scratch, 0 + mtspr MAS1, \scratch + lis \scratch, FSL_BOOKE_MAS2(\epn, \wimg)@h + ori \scratch, \scratch, FSL_BOOKE_MAS2(\epn, \wimg)@l + mtspr MAS2, \scratch + isync + msync + tlbwe + isync + .endm + #if defined(CONFIG_SYS_PPC_E500_DEBUG_TLB) && !defined(CONFIG_NAND_SPL) /* * TLB entry for debuggging in AS1 @@ -220,61 +291,35 @@ l2_disabled: * in AS1. */ - lis r6,FSL_BOOKE_MAS0(1, - CONFIG_SYS_PPC_E500_DEBUG_TLB, 0)@h - ori r6,r6,FSL_BOOKE_MAS0(1, - CONFIG_SYS_PPC_E500_DEBUG_TLB, 0)@l - #if !defined(CONFIG_SYS_RAMBOOT) && !defined(CONFIG_SECURE_BOOT) /* * TLB entry is created for IVPR + IVOR15 to map on valid OP code address * bacause flash's virtual address maps to 0xff800000 - 0xffffffff. * and this window is outside of 4K boot window. */ - lis r7,FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_4M)@h - ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_4M)@l - - lis r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE & 0xffc00000, - (MAS2_I|MAS2_G))@h - ori r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE & 0xffc00000, - (MAS2_I|MAS2_G))@l + create_tlb1_entry CONFIG_SYS_PPC_E500_DEBUG_TLB, \ + 0, BOOKE_PAGESZ_4M, \ + CONFIG_SYS_MONITOR_BASE & 0xffc00000, MAS2_I|MAS2_G, \ + 0xffc00000, MAS3_SX|MAS3_SW|MAS3_SR, \ + 0, r6 - /* The 85xx has the default boot window 0xff800000 - 0xffffffff */ - lis r9,FSL_BOOKE_MAS3(0xffc00000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@h - ori r9,r9,FSL_BOOKE_MAS3(0xffc00000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@l #elif !defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SECURE_BOOT) - lis r7,FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_1M)@h - ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_1M)@l - - lis r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE,(MAS2_I|MAS2_G))@h - ori r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE,(MAS2_I|MAS2_G))@l - - lis r9,FSL_BOOKE_MAS3(CONFIG_SYS_PBI_FLASH_WINDOW, 0, - (MAS3_SX|MAS3_SW|MAS3_SR))@h - ori r9,r9,FSL_BOOKE_MAS3(CONFIG_SYS_PBI_FLASH_WINDOW, 0, - (MAS3_SX|MAS3_SW|MAS3_SR))@l + create_tlb1_entry CONFIG_SYS_PPC_E500_DEBUG_TLB, \ + 0, BOOKE_PAGESZ_1M, \ + CONFIG_SYS_MONITOR_BASE, MAS2_I|MAS2_G, \ + CONFIG_SYS_PBI_FLASH_WINDOW, MAS3_SX|MAS3_SW|MAS3_SR, \ + 0, r6 #else /* * TLB entry is created for IVPR + IVOR15 to map on valid OP code address * because "nexti" will resize TLB to 4K */ - lis r7,FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256K)@h - ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256K)@l - - lis r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE, (MAS2_I))@h - ori r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE, - (MAS2_I))@l - lis r9,FSL_BOOKE_MAS3(CONFIG_SYS_MONITOR_BASE, 0, - (MAS3_SX|MAS3_SW|MAS3_SR))@h - ori r9,r9,FSL_BOOKE_MAS3(CONFIG_SYS_MONITOR_BASE, 0, - (MAS3_SX|MAS3_SW|MAS3_SR))@l + create_tlb1_entry CONFIG_SYS_PPC_E500_DEBUG_TLB, \ + 0, BOOKE_PAGESZ_256K, \ + CONFIG_SYS_MONITOR_BASE, MAS2_I, \ + CONFIG_SYS_MONITOR_BASE, MAS3_SX|MAS3_SW|MAS3_SR, \ + 0, r6 #endif - mtspr MAS0,r6 - mtspr MAS1,r7 - mtspr MAS2,r8 - mtspr MAS3,r9 - tlbwe - isync #endif /* @@ -392,27 +437,11 @@ l2_disabled: */ /* create a temp mapping TLB0[0] for LBCR */ - lis r6,FSL_BOOKE_MAS0(0, 0, 0)@h - ori r6,r6,FSL_BOOKE_MAS0(0, 0, 0)@l - - lis r7,FSL_BOOKE_MAS1(1, 0, 0, 0, BOOKE_PAGESZ_4K)@h - ori r7,r7,FSL_BOOKE_MAS1(1, 0, 0, 0, BOOKE_PAGESZ_4K)@l - - lis r8,FSL_BOOKE_MAS2(CONFIG_SYS_LBC_ADDR, MAS2_I|MAS2_G)@h - ori r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_LBC_ADDR, MAS2_I|MAS2_G)@l - - lis r9,FSL_BOOKE_MAS3(CONFIG_SYS_LBC_ADDR, 0, - (MAS3_SX|MAS3_SW|MAS3_SR))@h - ori r9,r9,FSL_BOOKE_MAS3(CONFIG_SYS_LBC_ADDR, 0, - (MAS3_SX|MAS3_SW|MAS3_SR))@l - - mtspr MAS0,r6 - mtspr MAS1,r7 - mtspr MAS2,r8 - mtspr MAS3,r9 - isync - msync - tlbwe + create_tlb0_entry 0, \ + 0, BOOKE_PAGESZ_4K, \ + CONFIG_SYS_LBC_ADDR, MAS2_I|MAS2_G, \ + CONFIG_SYS_LBC_ADDR, MAS3_SW|MAS3_SR, \ + 0, r6 /* Set LBCR register */ lis r4,CONFIG_SYS_LBCR_ADDR@h @@ -551,49 +580,22 @@ create_ccsr_new_tlb: ori r8, r8, CONFIG_SYS_CCSRBAR@l lis r9, (CONFIG_SYS_CCSRBAR + 0x1000)@h ori r9, r9, (CONFIG_SYS_CCSRBAR + 0x1000)@l - lis r0, FSL_BOOKE_MAS0(0, 0, 0)@h - ori r0, r0, FSL_BOOKE_MAS0(0, 0, 0)@l - lis r1, FSL_BOOKE_MAS1(1, 0, 0, 0, BOOKE_PAGESZ_4K)@h - ori r1, r1, FSL_BOOKE_MAS1(1, 0, 0, 0, BOOKE_PAGESZ_4K)@l - lis r2, FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR, (MAS2_I|MAS2_G))@h - ori r2, r2, FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR, (MAS2_I|MAS2_G))@l - lis r3, FSL_BOOKE_MAS3(CONFIG_SYS_CCSRBAR_PHYS_LOW, 0, (MAS3_SW|MAS3_SR))@h - ori r3, r3, FSL_BOOKE_MAS3(CONFIG_SYS_CCSRBAR_PHYS_LOW, 0, (MAS3_SW|MAS3_SR))@l -#ifdef CONFIG_ENABLE_36BIT_PHYS - lis r7, CONFIG_SYS_CCSRBAR_PHYS_HIGH@h - ori r7, r7, CONFIG_SYS_CCSRBAR_PHYS_HIGH@l - mtspr MAS7, r7 -#endif - mtspr MAS0, r0 - mtspr MAS1, r1 - mtspr MAS2, r2 - mtspr MAS3, r3 - isync - msync - tlbwe - + create_tlb0_entry 0, \ + 0, BOOKE_PAGESZ_4K, \ + CONFIG_SYS_CCSRBAR, MAS2_I|MAS2_G, \ + CONFIG_SYS_CCSRBAR_PHYS_LOW, MAS3_SW|MAS3_SR, \ + CONFIG_SYS_CCSRBAR_PHYS_HIGH, r3 /* * Create a TLB for the current location of CCSR. Register R9 is reserved * for the virtual address of this TLB (CONFIG_SYS_CCSRBAR + 0x1000). */ create_ccsr_old_tlb: - lis r0, FSL_BOOKE_MAS0(0, 1, 0)@h - ori r0, r0, FSL_BOOKE_MAS0(0, 1, 0)@l - lis r2, FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR + 0x1000, (MAS2_I|MAS2_G))@h - ori r2, r2, FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR + 0x1000, (MAS2_I|MAS2_G))@l - lis r3, FSL_BOOKE_MAS3(CONFIG_SYS_CCSRBAR_DEFAULT, 0, (MAS3_SW|MAS3_SR))@h - ori r3, r3, FSL_BOOKE_MAS3(CONFIG_SYS_CCSRBAR_DEFAULT, 0, (MAS3_SW|MAS3_SR))@l -#ifdef CONFIG_ENABLE_36BIT_PHYS - li r7, 0 /* The default CCSR address is always a 32-bit number */ - mtspr MAS7, r7 -#endif - mtspr MAS0, r0 - /* MAS1 is the same as above */ - mtspr MAS2, r2 - mtspr MAS3, r3 - isync - msync - tlbwe + create_tlb0_entry 1, \ + 0, BOOKE_PAGESZ_4K, \ + CONFIG_SYS_CCSRBAR + 0x1000, MAS2_I|MAS2_G, \ + CONFIG_SYS_CCSRBAR_DEFAULT, MAS3_SW|MAS3_SR, \ + 0, r3 /* The default CCSR address is always a 32-bit number */ + /* * We have a TLB for what we think is the current (old) CCSR. Let's @@ -743,29 +745,46 @@ write_new_ccsrbar: /* Delete the temporary TLBs */ delete_temp_tlbs: - lis r0, FSL_BOOKE_MAS0(0, 0, 0)@h - ori r0, r0, FSL_BOOKE_MAS0(0, 0, 0)@l - li r1, 0 - lis r2, FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR, (MAS2_I|MAS2_G))@h - ori r2, r2, FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR, (MAS2_I|MAS2_G))@l - mtspr MAS0, r0 - mtspr MAS1, r1 - mtspr MAS2, r2 - isync - msync - tlbwe + delete_tlb0_entry 0, CONFIG_SYS_CCSRBAR, MAS2_I|MAS2_G, r3 + delete_tlb0_entry 1, CONFIG_SYS_CCSRBAR + 0x1000, MAS2_I|MAS2_G, r3 - lis r0, FSL_BOOKE_MAS0(0, 1, 0)@h - ori r0, r0, FSL_BOOKE_MAS0(0, 1, 0)@l - lis r2, FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR + 0x1000, (MAS2_I|MAS2_G))@h - ori r2, r2, FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR + 0x1000, (MAS2_I|MAS2_G))@l - mtspr MAS0, r0 - mtspr MAS2, r2 - isync - msync - tlbwe #endif /* #if (CONFIG_SYS_CCSRBAR_DEFAULT != CONFIG_SYS_CCSRBAR_PHYS) */ +#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2 +create_ccsr_l2_tlb: + /* + * Create a TLB for the MMR location of CCSR + * to access L2CSR0 register + */ + create_tlb0_entry 0, \ + 0, BOOKE_PAGESZ_4K, \ + CONFIG_SYS_CCSRBAR + 0xC20000, MAS2_I|MAS2_G, \ + CONFIG_SYS_CCSRBAR_PHYS_LOW + 0xC20000, MAS3_SW|MAS3_SR, \ + CONFIG_SYS_CCSRBAR_PHYS_HIGH, r3 + +enable_l2_cluster_l2: + /* enable L2 cache */ + lis r3, (CONFIG_SYS_CCSRBAR + 0xC20000)@h + ori r3, r3, (CONFIG_SYS_CCSRBAR + 0xC20000)@l + li r4, 33 /* stash id */ + stw r4, 4(r3) + lis r4, (L2CSR0_L2FI|L2CSR0_L2LFC)@h + ori r4, r4, (L2CSR0_L2FI|L2CSR0_L2LFC)@l + sync + stw r4, 0(r3) /* invalidate L2 */ +1: sync + lwz r0, 0(r3) + twi 0, r0, 0 + isync + and. r1, r0, r4 + bne 1b + lis r4, L2CSR0_L2E@h + sync + stw r4, 0(r3) /* eanble L2 */ +delete_ccsr_l2_tlb: + delete_tlb0_entry 0, CONFIG_SYS_CCSRBAR + 0xC20000, MAS2_I|MAS2_G, r3 +#endif + #ifdef CONFIG_SYS_FSL_ERRATUM_A004510 #define DCSR_LAWBARH0 (CONFIG_SYS_CCSRBAR + 0x1000) #define LAW_SIZE_1M 0x13 @@ -1019,83 +1038,50 @@ create_init_ram_area: #if !defined(CONFIG_SYS_RAMBOOT) && !defined(CONFIG_SECURE_BOOT) /* create a temp mapping in AS=1 to the 4M boot window */ - lis r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_4M)@h - ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_4M)@l + create_tlb1_entry 15, \ + 1, BOOKE_PAGESZ_4M, \ + CONFIG_SYS_MONITOR_BASE & 0xffc00000, MAS2_I|MAS2_G, \ + 0xffc00000, MAS3_SX|MAS3_SW|MAS3_SR, \ + 0, r6 - lis r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE & 0xffc00000, (MAS2_I|MAS2_G))@h - ori r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE & 0xffc00000, (MAS2_I|MAS2_G))@l - - /* The 85xx has the default boot window 0xff800000 - 0xffffffff */ - lis r9,FSL_BOOKE_MAS3(0xffc00000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@h - ori r9,r9,FSL_BOOKE_MAS3(0xffc00000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@l #elif !defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SECURE_BOOT) /* create a temp mapping in AS = 1 for Flash mapping * created by PBL for ISBC code */ - lis r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_1M)@h - ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_1M)@l - - lis r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE, (MAS2_I|MAS2_G))@h - ori r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE, (MAS2_I|MAS2_G))@l - - lis r9,FSL_BOOKE_MAS3(CONFIG_SYS_PBI_FLASH_WINDOW, 0, - (MAS3_SX|MAS3_SW|MAS3_SR))@h - ori r9,r9,FSL_BOOKE_MAS3(CONFIG_SYS_PBI_FLASH_WINDOW, 0, - (MAS3_SX|MAS3_SW|MAS3_SR))@l + create_tlb1_entry 15, \ + 1, BOOKE_PAGESZ_1M, \ + CONFIG_SYS_MONITOR_BASE, MAS2_I|MAS2_G, \ + CONFIG_SYS_PBI_FLASH_WINDOW, MAS3_SX|MAS3_SW|MAS3_SR, \ + 0, r6 #else /* * create a temp mapping in AS=1 to the 1M CONFIG_SYS_MONITOR_BASE space, the main * image has been relocated to CONFIG_SYS_MONITOR_BASE on the second stage. */ - lis r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_1M)@h - ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_1M)@l - - lis r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE, (MAS2_I|MAS2_G))@h - ori r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE, (MAS2_I|MAS2_G))@l - - lis r9,FSL_BOOKE_MAS3(CONFIG_SYS_MONITOR_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@h - ori r9,r9,FSL_BOOKE_MAS3(CONFIG_SYS_MONITOR_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@l + create_tlb1_entry 15, \ + 1, BOOKE_PAGESZ_1M, \ + CONFIG_SYS_MONITOR_BASE, MAS2_I|MAS2_G, \ + CONFIG_SYS_MONITOR_BASE, MAS3_SX|MAS3_SW|MAS3_SR, \ + 0, r6 #endif - mtspr MAS0,r6 - mtspr MAS1,r7 - mtspr MAS2,r8 - mtspr MAS3,r9 - isync - msync - tlbwe - /* create a temp mapping in AS=1 to the stack */ - lis r6,FSL_BOOKE_MAS0(1, 14, 0)@h - ori r6,r6,FSL_BOOKE_MAS0(1, 14, 0)@l - - lis r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_16K)@h - ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_16K)@l - - lis r8,FSL_BOOKE_MAS2(CONFIG_SYS_INIT_RAM_ADDR, 0)@h - ori r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_INIT_RAM_ADDR, 0)@l - #if defined(CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) && \ defined(CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH) - lis r9,FSL_BOOKE_MAS3(CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW, 0, - (MAS3_SX|MAS3_SW|MAS3_SR))@h - ori r9,r9,FSL_BOOKE_MAS3(CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW, 0, - (MAS3_SX|MAS3_SW|MAS3_SR))@l - li r10,CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH - mtspr MAS7,r10 + create_tlb1_entry 14, \ + 1, BOOKE_PAGESZ_16K, \ + CONFIG_SYS_INIT_RAM_ADDR, 0, \ + CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW, MAS3_SX|MAS3_SW|MAS3_SR, \ + CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH, r6 + #else - lis r9,FSL_BOOKE_MAS3(CONFIG_SYS_INIT_RAM_ADDR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@h - ori r9,r9,FSL_BOOKE_MAS3(CONFIG_SYS_INIT_RAM_ADDR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@l + create_tlb1_entry 14, \ + 1, BOOKE_PAGESZ_16K, \ + CONFIG_SYS_INIT_RAM_ADDR, 0, \ + CONFIG_SYS_INIT_RAM_ADDR, MAS3_SX|MAS3_SW|MAS3_SR, \ + 0, r6 #endif - mtspr MAS0,r6 - mtspr MAS1,r7 - mtspr MAS2,r8 - mtspr MAS3,r9 - isync - msync - tlbwe - lis r6,MSR_IS|MSR_DS|MSR_DE@h ori r6,r6,MSR_IS|MSR_DS|MSR_DE@l lis r7,switch_as@h diff --git a/arch/powerpc/cpu/mpc85xx/t4240_ids.c b/arch/powerpc/cpu/mpc85xx/t4240_ids.c new file mode 100644 index 0000000..a8f16b1 --- /dev/null +++ b/arch/powerpc/cpu/mpc85xx/t4240_ids.c @@ -0,0 +1,203 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/fsl_portals.h> +#include <asm/fsl_liodn.h> + +#ifdef CONFIG_SYS_DPAA_QBMAN +struct qportal_info qp_info[CONFIG_SYS_QMAN_NUM_PORTALS] = { + /* dqrr liodn, frame data liodn, liodn off, sdest */ + SET_QP_INFO(1, 27, 1, 0), + SET_QP_INFO(2, 28, 1, 0), + SET_QP_INFO(3, 29, 1, 1), + SET_QP_INFO(4, 30, 1, 1), + SET_QP_INFO(5, 31, 1, 2), + SET_QP_INFO(6, 32, 1, 2), + SET_QP_INFO(7, 33, 1, 3), + SET_QP_INFO(8, 34, 1, 3), + SET_QP_INFO(9, 35, 1, 4), + SET_QP_INFO(10, 36, 1, 4), + SET_QP_INFO(11, 37, 1, 5), + SET_QP_INFO(12, 38, 1, 5), + SET_QP_INFO(13, 39, 1, 6), + SET_QP_INFO(14, 40, 1, 6), + SET_QP_INFO(15, 41, 1, 7), + SET_QP_INFO(16, 42, 1, 7), + SET_QP_INFO(17, 43, 1, 8), + SET_QP_INFO(18, 44, 1, 8), + SET_QP_INFO(19, 45, 1, 9), + SET_QP_INFO(20, 46, 1, 9), + SET_QP_INFO(21, 47, 1, 10), + SET_QP_INFO(22, 48, 1, 10), + SET_QP_INFO(23, 49, 1, 11), + SET_QP_INFO(24, 50, 1, 11), + SET_QP_INFO(65, 89, 1, 0), + SET_QP_INFO(66, 90, 1, 0), + SET_QP_INFO(67, 91, 1, 1), + SET_QP_INFO(68, 92, 1, 1), + SET_QP_INFO(69, 93, 1, 2), + SET_QP_INFO(70, 94, 1, 2), + SET_QP_INFO(71, 95, 1, 3), + SET_QP_INFO(72, 96, 1, 3), + SET_QP_INFO(73, 97, 1, 4), + SET_QP_INFO(74, 98, 1, 4), + SET_QP_INFO(75, 99, 1, 5), + SET_QP_INFO(76, 100, 1, 5), + SET_QP_INFO(77, 101, 1, 6), + SET_QP_INFO(78, 102, 1, 6), + SET_QP_INFO(79, 103, 1, 7), + SET_QP_INFO(80, 104, 1, 7), + SET_QP_INFO(81, 105, 1, 8), + SET_QP_INFO(82, 106, 1, 8), + SET_QP_INFO(83, 107, 1, 9), + SET_QP_INFO(84, 108, 1, 9), + SET_QP_INFO(85, 109, 1, 10), + SET_QP_INFO(86, 110, 1, 10), + SET_QP_INFO(87, 111, 1, 11), + SET_QP_INFO(88, 112, 1, 11), + SET_QP_INFO(25, 51, 1, 0), + SET_QP_INFO(26, 52, 1, 0), +}; +#endif + +struct srio_liodn_id_table srio_liodn_tbl[] = { + SET_SRIO_LIODN_1(1, 307), + SET_SRIO_LIODN_1(2, 387), +}; +int srio_liodn_tbl_sz = ARRAY_SIZE(srio_liodn_tbl); + +struct liodn_id_table liodn_tbl[] = { +#ifdef CONFIG_SYS_DPAA_QBMAN + SET_QMAN_LIODN(62), + SET_BMAN_LIODN(63), +#endif + + SET_SDHC_LIODN(1, 552), + + SET_PME_LIODN(117), + + SET_USB_LIODN(1, "fsl-usb2-mph", 553), + SET_USB_LIODN(2, "fsl-usb2-dr", 554), + + SET_SATA_LIODN(1, 555), + SET_SATA_LIODN(2, 556), + + SET_PCI_LIODN(CONFIG_SYS_FSL_PCIE_COMPAT, 1, 148), + SET_PCI_LIODN(CONFIG_SYS_FSL_PCIE_COMPAT, 2, 228), + SET_PCI_LIODN(CONFIG_SYS_FSL_PCIE_COMPAT, 3, 308), + SET_PCI_LIODN(CONFIG_SYS_FSL_PCIE_COMPAT, 4, 388), + + SET_DMA_LIODN(1, 147), + SET_DMA_LIODN(2, 227), + + SET_GUTS_LIODN("fsl,rapidio-delta", 199, rio1liodnr, 0), + SET_GUTS_LIODN(NULL, 200, rio2liodnr, 0), + SET_GUTS_LIODN(NULL, 201, rio1maintliodnr, 0), + SET_GUTS_LIODN(NULL, 202, rio2maintliodnr, 0), + +#ifdef CONFIG_SYS_PMAN + SET_PMAN_LIODN(1, 513), + SET_PMAN_LIODN(2, 514), + SET_PMAN_LIODN(3, 515), +#endif + + /* SET_NEXUS_LIODN(557), -- not yet implemented */ +}; +int liodn_tbl_sz = ARRAY_SIZE(liodn_tbl); + +#ifdef CONFIG_SYS_DPAA_FMAN +struct liodn_id_table fman1_liodn_tbl[] = { + SET_FMAN_RX_1G_LIODN(1, 0, 88), + SET_FMAN_RX_1G_LIODN(1, 1, 89), + SET_FMAN_RX_1G_LIODN(1, 2, 90), + SET_FMAN_RX_1G_LIODN(1, 3, 91), + SET_FMAN_RX_1G_LIODN(1, 4, 92), + SET_FMAN_RX_1G_LIODN(1, 5, 93), + SET_FMAN_RX_10G_LIODN(1, 0, 94), + SET_FMAN_RX_10G_LIODN(1, 1, 95), +}; +int fman1_liodn_tbl_sz = ARRAY_SIZE(fman1_liodn_tbl); +#if (CONFIG_SYS_NUM_FMAN == 2) +struct liodn_id_table fman2_liodn_tbl[] = { + SET_FMAN_RX_1G_LIODN(2, 0, 88), + SET_FMAN_RX_1G_LIODN(2, 1, 89), + SET_FMAN_RX_1G_LIODN(2, 2, 90), + SET_FMAN_RX_1G_LIODN(2, 3, 91), + SET_FMAN_RX_1G_LIODN(2, 4, 92), + SET_FMAN_RX_1G_LIODN(2, 5, 93), + SET_FMAN_RX_10G_LIODN(2, 0, 94), + SET_FMAN_RX_10G_LIODN(2, 1, 95), +}; +int fman2_liodn_tbl_sz = ARRAY_SIZE(fman2_liodn_tbl); +#endif +#endif + +struct liodn_id_table sec_liodn_tbl[] = { + SET_SEC_JR_LIODN_ENTRY(0, 454, 458), + SET_SEC_JR_LIODN_ENTRY(1, 455, 459), + SET_SEC_JR_LIODN_ENTRY(2, 456, 460), + SET_SEC_JR_LIODN_ENTRY(3, 457, 461), + SET_SEC_RTIC_LIODN_ENTRY(a, 453), + SET_SEC_RTIC_LIODN_ENTRY(b, 549), + SET_SEC_RTIC_LIODN_ENTRY(c, 550), + SET_SEC_RTIC_LIODN_ENTRY(d, 551), + SET_SEC_DECO_LIODN_ENTRY(0, 541, 610), + SET_SEC_DECO_LIODN_ENTRY(1, 542, 611), + SET_SEC_DECO_LIODN_ENTRY(2, 543, 612), + SET_SEC_DECO_LIODN_ENTRY(3, 544, 613), + SET_SEC_DECO_LIODN_ENTRY(4, 545, 614), + SET_SEC_DECO_LIODN_ENTRY(5, 546, 615), + SET_SEC_DECO_LIODN_ENTRY(6, 547, 616), + SET_SEC_DECO_LIODN_ENTRY(7, 548, 617), +}; +int sec_liodn_tbl_sz = ARRAY_SIZE(sec_liodn_tbl); + +#ifdef CONFIG_SYS_DPAA_RMAN +struct liodn_id_table rman_liodn_tbl[] = { + /* Set RMan block 0-3 liodn offset */ + SET_RMAN_LIODN(0, 678), + SET_RMAN_LIODN(1, 679), + SET_RMAN_LIODN(2, 680), + SET_RMAN_LIODN(3, 681), +}; +int rman_liodn_tbl_sz = ARRAY_SIZE(rman_liodn_tbl); +#endif + +struct liodn_id_table liodn_bases[] = { +#ifdef CONFIG_SYS_DPAA_DCE + [FSL_HW_PORTAL_DCE] = SET_LIODN_BASE_2(618, 694), +#endif + [FSL_HW_PORTAL_SEC] = SET_LIODN_BASE_2(462, 558), +#ifdef CONFIG_SYS_DPAA_FMAN + [FSL_HW_PORTAL_FMAN1] = SET_LIODN_BASE_1(973), +#if (CONFIG_SYS_NUM_FMAN == 2) + [FSL_HW_PORTAL_FMAN2] = SET_LIODN_BASE_1(1069), +#endif +#endif +#ifdef CONFIG_SYS_DPAA_PME + [FSL_HW_PORTAL_PME] = SET_LIODN_BASE_2(770, 846), +#endif +#ifdef CONFIG_SYS_DPAA_RMAN + [FSL_HW_PORTAL_RMAN] = SET_LIODN_BASE_1(922), +#endif +}; diff --git a/arch/powerpc/cpu/mpc85xx/t4240_serdes.c b/arch/powerpc/cpu/mpc85xx/t4240_serdes.c new file mode 100644 index 0000000..102defa --- /dev/null +++ b/arch/powerpc/cpu/mpc85xx/t4240_serdes.c @@ -0,0 +1,237 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/fsl_serdes.h> +#include <asm/processor.h> +#include <asm/io.h> +#include "fsl_corenet2_serdes.h" + +struct serdes_config { + u32 protocol; + u8 lanes[SRDS_MAX_LANES]; +}; + +static struct serdes_config serdes1_cfg_tbl[] = { + /* SerDes 1 */ + {1, {XAUI_FM1_MAC9, XAUI_FM1_MAC9, + XAUI_FM1_MAC9, XAUI_FM1_MAC9, + XAUI_FM1_MAC10, XAUI_FM1_MAC10, + XAUI_FM1_MAC10, XAUI_FM1_MAC10}}, + {2, {HIGIG_FM1_MAC9, HIGIG_FM1_MAC9, + HIGIG_FM1_MAC9, HIGIG_FM1_MAC9, + HIGIG_FM1_MAC10, HIGIG_FM1_MAC10, + HIGIG_FM1_MAC10, HIGIG_FM1_MAC10}}, + {4, {HIGIG_FM1_MAC9, HIGIG_FM1_MAC9, + HIGIG_FM1_MAC9, HIGIG_FM1_MAC9, + HIGIG_FM1_MAC10, HIGIG_FM1_MAC10, + HIGIG_FM1_MAC10, HIGIG_FM1_MAC10}}, + {28, {SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6, + SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC9, + SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4}}, + {36, {SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6, + SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC9, + SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4}}, + {38, {NONE, NONE, QSGMII_FM1_B, NONE, + NONE, NONE, QSGMII_FM1_A, NONE}}, + {40, {SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6, + SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC9, + NONE, NONE, QSGMII_FM1_A, NONE}}, + {46, {SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6, + SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC9, + NONE, NONE, QSGMII_FM1_A, NONE}}, + {48, {SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6, + SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC9, + NONE, NONE, QSGMII_FM1_A, NONE}}, + {} +}; +static struct serdes_config serdes2_cfg_tbl[] = { + /* SerDes 2 */ + {1, {XAUI_FM2_MAC9, XAUI_FM2_MAC9, + XAUI_FM2_MAC9, XAUI_FM2_MAC9, + XAUI_FM2_MAC10, XAUI_FM2_MAC10, + XAUI_FM2_MAC10, XAUI_FM2_MAC10}}, + {2, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + HIGIG_FM2_MAC10, HIGIG_FM2_MAC10, + HIGIG_FM2_MAC10, HIGIG_FM2_MAC10}}, + {4, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + HIGIG_FM2_MAC10, HIGIG_FM2_MAC10, + HIGIG_FM2_MAC10, HIGIG_FM2_MAC10}}, + {7, {XAUI_FM2_MAC9, XAUI_FM2_MAC9, + XAUI_FM2_MAC9, XAUI_FM2_MAC9, + SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, + SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}}, + {13, {XAUI_FM2_MAC9, XAUI_FM2_MAC9, + XAUI_FM2_MAC9, XAUI_FM2_MAC9, + SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, + SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}}, + {14, {XAUI_FM2_MAC9, XAUI_FM2_MAC9, + XAUI_FM2_MAC9, XAUI_FM2_MAC9, + SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, + SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}}, + {16, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, + SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}}, + {22, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, + SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}}, + {23, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, + SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}}, + {25, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, + SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}}, + {26, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, + SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}}, + {28, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6, + SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9, + SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, + SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}}, + {36, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6, + SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9, + SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, + SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}}, + {38, {NONE, NONE, QSGMII_FM2_B, NONE, + NONE, NONE, QSGMII_FM1_A, NONE}}, + {40, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6, + SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9, + NONE, NONE, QSGMII_FM1_A, NONE}}, + {46, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6, + SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9, + NONE, NONE, QSGMII_FM1_A, NONE}}, + {48, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6, + SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9, + NONE, NONE, QSGMII_FM1_A, NONE}}, + {50, {XAUI_FM2_MAC9, XAUI_FM2_MAC9, + XAUI_FM2_MAC9, XAUI_FM2_MAC9, + NONE, NONE, QSGMII_FM1_A, NONE}}, + {52, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + NONE, NONE, QSGMII_FM1_A, NONE}}, + {54, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + NONE, NONE, QSGMII_FM1_A, NONE}}, + {56, {XFI_FM1_MAC9, XFI_FM1_MAC10, + XFI_FM2_MAC10, XFI_FM2_MAC9, + SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, + SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}}, + {57, {XFI_FM1_MAC9, XFI_FM1_MAC10, + XFI_FM2_MAC10, XFI_FM2_MAC9, + SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, + SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}}, + {} +}; +static struct serdes_config serdes3_cfg_tbl[] = { + /* SerDes 3 */ + {2, {PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1}}, + {4, {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, PCIE2, PCIE2}}, + {6, {PCIE1, PCIE1, PCIE1, PCIE1, SRIO1, SRIO1, SRIO1, SRIO1}}, + {8, {PCIE1, PCIE1, PCIE1, PCIE1, SRIO1, NONE, NONE, NONE}}, + {9, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, + INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN}}, + {10, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, + INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN}}, + {12, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, + PCIE2, PCIE2, PCIE2, PCIE2}}, + {14, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, + PCIE2, PCIE2, PCIE2, PCIE2}}, + {16, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, + SRIO1, SRIO1, SRIO1, SRIO1}}, + {17, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, + SRIO1, SRIO1, SRIO1, SRIO1}}, + {19, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, + SRIO1, SRIO1, SRIO1, SRIO1}}, + {20, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, + SRIO1, SRIO1, SRIO1, SRIO1}}, + {} +}; +static struct serdes_config serdes4_cfg_tbl[] = { + /* SerDes 4 */ + {2, {PCIE3, PCIE3, PCIE3, PCIE3, PCIE3, PCIE3, PCIE3, PCIE3}}, + {4, {PCIE3, PCIE3, PCIE3, PCIE3, PCIE4, PCIE4, PCIE4, PCIE4}}, + {6, {PCIE3, PCIE3, PCIE3, PCIE3, SRIO2, SRIO2, SRIO2, SRIO2}}, + {8, {PCIE3, PCIE3, PCIE3, PCIE3, SRIO2, SRIO2, SRIO2, SRIO2}}, + {10, {PCIE3, PCIE3, PCIE3, PCIE3, PCIE4, PCIE4, SATA1, SATA1}}, + {12, {PCIE3, PCIE3, PCIE3, PCIE3, AURORA, AURORA, SATA1, SATA1}}, + {14, {PCIE3, PCIE3, PCIE3, PCIE3, AURORA, AURORA, SRIO2, SRIO2}}, + {16, {PCIE3, PCIE3, PCIE3, PCIE3, AURORA, AURORA, SRIO2, SRIO2}}, + {18, {PCIE3, PCIE3, PCIE3, PCIE3, AURORA, AURORA, AURORA, AURORA}}, + {} +}; +static struct serdes_config *serdes_cfg_tbl[] = { + serdes1_cfg_tbl, + serdes2_cfg_tbl, + serdes3_cfg_tbl, + serdes4_cfg_tbl, +}; + +enum srds_prtcl serdes_get_prtcl(int serdes, int cfg, int lane) +{ + struct serdes_config *ptr; + + if (serdes >= ARRAY_SIZE(serdes_cfg_tbl)) + return 0; + + ptr = serdes_cfg_tbl[serdes]; + while (ptr->protocol) { + if (ptr->protocol == cfg) + return ptr->lanes[lane]; + ptr++; + } + return 0; +} + +int is_serdes_prtcl_valid(int serdes, u32 prtcl) +{ + int i; + struct serdes_config *ptr; + + if (serdes >= ARRAY_SIZE(serdes_cfg_tbl)) + return 0; + + ptr = serdes_cfg_tbl[serdes]; + while (ptr->protocol) { + if (ptr->protocol == prtcl) + break; + ptr++; + } + + if (!ptr->protocol) + return 0; + + for (i = 0; i < SRDS_MAX_LANES; i++) { + if (ptr->lanes[i] != NONE) + return 1; + } + + return 0; +} diff --git a/arch/powerpc/cpu/mpc85xx/tlb.c b/arch/powerpc/cpu/mpc85xx/tlb.c index 929f6a6..a548dec 100644 --- a/arch/powerpc/cpu/mpc85xx/tlb.c +++ b/arch/powerpc/cpu/mpc85xx/tlb.c @@ -249,7 +249,7 @@ setup_ddr_tlbs_phys(phys_addr_t p_addr, unsigned int memsize_in_meg) { int i; unsigned int tlb_size; - unsigned int wimge = 0; + unsigned int wimge = MAS2_M; unsigned int ram_tlb_address = (unsigned int)CONFIG_SYS_DDR_SDRAM_BASE; unsigned int max_cam; u64 size, memsize = (u64)memsize_in_meg << 20; diff --git a/arch/powerpc/cpu/mpc86xx/fdt.c b/arch/powerpc/cpu/mpc86xx/fdt.c index 61f5110..2f955fe 100644 --- a/arch/powerpc/cpu/mpc86xx/fdt.c +++ b/arch/powerpc/cpu/mpc86xx/fdt.c @@ -20,7 +20,7 @@ void ft_cpu_setup(void *blob, bd_t *bd) { #ifdef CONFIG_MP int off; - u32 bootpg = determine_mp_bootpg(); + u32 bootpg = determine_mp_bootpg(NULL); #endif do_fixup_by_prop_u32(blob, "device_type", "cpu", 4, diff --git a/arch/powerpc/cpu/mpc86xx/mp.c b/arch/powerpc/cpu/mpc86xx/mp.c index 30c99eb..de705f0 100644 --- a/arch/powerpc/cpu/mpc86xx/mp.c +++ b/arch/powerpc/cpu/mpc86xx/mp.c @@ -90,8 +90,11 @@ int cpu_release(int nr, int argc, char * const argv[]) return 1; } -u32 determine_mp_bootpg(void) +u32 determine_mp_bootpg(unsigned int *pagesize) { + if (pagesize) + *pagesize = 4096; + /* if we have 4G or more of memory, put the boot page at 4Gb-1M */ if ((u64)gd->ram_size > 0xfffff000) return (0xfff00000); @@ -101,7 +104,7 @@ u32 determine_mp_bootpg(void) void cpu_mp_lmb_reserve(struct lmb *lmb) { - u32 bootpg = determine_mp_bootpg(); + u32 bootpg = determine_mp_bootpg(NULL); /* tell u-boot we stole a page */ lmb_reserve(lmb, bootpg, 4096); @@ -115,7 +118,7 @@ void setup_mp(void) { extern ulong __secondary_start_page; ulong fixup = (ulong)&__secondary_start_page; - u32 bootpg = determine_mp_bootpg(); + u32 bootpg = determine_mp_bootpg(NULL); u32 bootpg_va; if (bootpg >= CONFIG_SYS_MAX_DDR_BAT_SIZE) { diff --git a/arch/powerpc/cpu/mpc8xxx/cpu.c b/arch/powerpc/cpu/mpc8xxx/cpu.c index 78a8f92..2c487ca 100644 --- a/arch/powerpc/cpu/mpc8xxx/cpu.c +++ b/arch/powerpc/cpu/mpc8xxx/cpu.c @@ -73,6 +73,17 @@ struct cpu_type cpu_type_list [] = { CPU_TYPE_ENTRY(P4080, P4080, 8), CPU_TYPE_ENTRY(P5010, P5010, 1), CPU_TYPE_ENTRY(P5020, P5020, 2), + CPU_TYPE_ENTRY(P5021, P5021, 2), + CPU_TYPE_ENTRY(P5040, P5040, 4), + CPU_TYPE_ENTRY(T4240, T4240, 0), + CPU_TYPE_ENTRY(T4120, T4120, 0), + CPU_TYPE_ENTRY(B4860, B4860, 0), + CPU_TYPE_ENTRY(G4860, G4860, 0), + CPU_TYPE_ENTRY(G4060, G4060, 0), + CPU_TYPE_ENTRY(B4440, B4440, 0), + CPU_TYPE_ENTRY(G4440, G4440, 0), + CPU_TYPE_ENTRY(B4420, B4420, 0), + CPU_TYPE_ENTRY(B4220, B4220, 0), CPU_TYPE_ENTRY(BSC9130, 9130, 1), CPU_TYPE_ENTRY(BSC9131, 9131, 1), #elif defined(CONFIG_MPC86xx) diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c b/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c index 2592873..5928eb8 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c +++ b/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c @@ -229,6 +229,26 @@ static void set_csn_config_2(int i, fsl_ddr_cfg_regs_t *ddr) /* -3E = 667 CL5, -25 = CL6 800, -25E = CL5 800 */ #if !defined(CONFIG_FSL_DDR1) +static inline int avoid_odt_overlap(const dimm_params_t *dimm_params) +{ +#if CONFIG_DIMM_SLOTS_PER_CTLR == 1 + if (dimm_params[0].n_ranks == 4) + return 1; +#endif + +#if CONFIG_DIMM_SLOTS_PER_CTLR == 2 + if ((dimm_params[0].n_ranks == 2) && + (dimm_params[1].n_ranks == 2)) + return 1; + +#ifdef CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE + if (dimm_params[0].n_ranks == 4) + return 1; +#endif +#endif + return 0; +} + /* * DDR SDRAM Timing Configuration 0 (TIMING_CFG_0) * @@ -236,7 +256,8 @@ static void set_csn_config_2(int i, fsl_ddr_cfg_regs_t *ddr) * dreams up non-zero default values to be backwards compatible. */ static void set_timing_cfg_0(fsl_ddr_cfg_regs_t *ddr, - const memctl_options_t *popts) + const memctl_options_t *popts, + const dimm_params_t *dimm_params) { unsigned char trwt_mclk = 0; /* Read-to-write turnaround */ unsigned char twrt_mclk = 0; /* Write-to-read turnaround */ @@ -266,7 +287,18 @@ static void set_timing_cfg_0(fsl_ddr_cfg_regs_t *ddr, unsigned int data_rate = get_ddr_freq(0); tmrd_mclk = 4; /* set the turnaround time */ - trwt_mclk = 1; + + /* + * for single quad-rank DIMM and two dual-rank DIMMs + * to avoid ODT overlap + */ + if (avoid_odt_overlap(dimm_params)) { + twwt_mclk = 2; + trrt_mclk = 1; + } + /* for faster clock, need more time for data setup */ + trwt_mclk = (data_rate/1000000 > 1800) ? 2 : 1; + if ((data_rate/1000000 > 1150) || (popts->memctl_interleaving)) twrt_mclk = 1; @@ -451,8 +483,8 @@ static void set_timing_cfg_1(fsl_ddr_cfg_regs_t *ddr, | ((caslat_ctrl & 0xF) << 16) | ((refrec_ctrl & 0xF) << 12) | ((wrrec_mclk & 0x0F) << 8) - | ((acttoact_mclk & 0x07) << 4) - | ((wrtord_mclk & 0x07) << 0) + | ((acttoact_mclk & 0x0F) << 4) + | ((wrtord_mclk & 0x0F) << 0) ); debug("FSLDDR: timing_cfg_1 = 0x%08x\n", ddr->timing_cfg_1); } @@ -659,6 +691,7 @@ static void set_ddr_sdram_cfg_2(fsl_ddr_cfg_regs_t *ddr, unsigned int dqs_cfg; /* DQS configuration */ unsigned int odt_cfg = 0; /* ODT configuration */ unsigned int num_pr; /* Number of posted refreshes */ + unsigned int slow = 0; /* DDR will be run less than 1250 */ unsigned int obc_cfg; /* On-The-Fly Burst Chop Cfg */ unsigned int ap_en; /* Address Parity Enable */ unsigned int d_init; /* DRAM data initialization */ @@ -692,6 +725,10 @@ static void set_ddr_sdram_cfg_2(fsl_ddr_cfg_regs_t *ddr, obc_cfg = 0; #endif +#if (CONFIG_SYS_FSL_DDR_VER >= FSL_DDR_VER_4_7) + slow = get_ddr_freq(0) < 1249000000; +#endif + if (popts->registered_dimm_en) { rcw_en = 1; ap_en = popts->ap_en; @@ -720,6 +757,7 @@ static void set_ddr_sdram_cfg_2(fsl_ddr_cfg_regs_t *ddr, | ((dqs_cfg & 0x3) << 26) | ((odt_cfg & 0x3) << 21) | ((num_pr & 0xf) << 12) + | ((slow & 1) << 11) | (qd_en << 9) | (unq_mrs_en << 8) | ((obc_cfg & 0x1) << 6) @@ -1347,6 +1385,11 @@ static void set_ddr_wrlvl_cntl(fsl_ddr_cfg_regs_t *ddr, unsigned int wrlvl_en, | ((wrlvl_start & 0x1F) << 0) ); debug("FSLDDR: wrlvl_cntl = 0x%08x\n", ddr->ddr_wrlvl_cntl); + ddr->ddr_wrlvl_cntl_2 = popts->wrlvl_ctl_2; + debug("FSLDDR: wrlvl_cntl_2 = 0x%08x\n", ddr->ddr_wrlvl_cntl_2); + ddr->ddr_wrlvl_cntl_3 = popts->wrlvl_ctl_3; + debug("FSLDDR: wrlvl_cntl_3 = 0x%08x\n", ddr->ddr_wrlvl_cntl_3); + } /* DDR Self Refresh Counter (DDR_SR_CNTR) */ @@ -1370,6 +1413,12 @@ static void set_ddr_cdr1(fsl_ddr_cfg_regs_t *ddr, const memctl_options_t *popts) debug("FSLDDR: ddr_cdr1 = 0x%08x\n", ddr->ddr_cdr1); } +static void set_ddr_cdr2(fsl_ddr_cfg_regs_t *ddr, const memctl_options_t *popts) +{ + ddr->ddr_cdr2 = popts->ddr_cdr2; + debug("FSLDDR: ddr_cdr2 = 0x%08x\n", ddr->ddr_cdr2); +} + unsigned int check_fsl_memctl_config_regs(const fsl_ddr_cfg_regs_t *ddr) { @@ -1466,7 +1515,7 @@ compute_fsl_memctl_config_regs(const memctl_options_t *popts, break; } sa = common_dimm->base_address; - ea = common_dimm->total_mem - 1; + ea = sa + common_dimm->total_mem - 1; } else if (!popts->memctl_interleaving) { /* * If memory interleaving between controllers is NOT @@ -1480,7 +1529,7 @@ compute_fsl_memctl_config_regs(const memctl_options_t *popts, switch (popts->ba_intlv_ctl & FSL_DDR_CS0_CS1_CS2_CS3) { case FSL_DDR_CS0_CS1_CS2_CS3: sa = common_dimm->base_address; - ea = common_dimm->total_mem - 1; + ea = sa + common_dimm->total_mem - 1; break; case FSL_DDR_CS0_CS1_AND_CS2_CS3: if ((i >= 2) && (dimm_number == 0)) { @@ -1537,17 +1586,19 @@ compute_fsl_memctl_config_regs(const memctl_options_t *popts, sa >>= 24; ea >>= 24; - ddr->cs[i].bnds = (0 - | ((sa & 0xFFF) << 16) /* starting address MSB */ - | ((ea & 0xFFF) << 0) /* ending address MSB */ - ); + if (cs_en) { + ddr->cs[i].bnds = (0 + | ((sa & 0xFFF) << 16)/* starting address MSB */ + | ((ea & 0xFFF) << 0) /* ending address MSB */ + ); + } else { + debug("FSLDDR: setting bnds to 0 for inactive CS\n"); + ddr->cs[i].bnds = 0; + } debug("FSLDDR: cs[%d]_bnds = 0x%08x\n", i, ddr->cs[i].bnds); - if (cs_en) { - set_csn_config(dimm_number, i, ddr, popts, dimm_params); - set_csn_config_2(i, ddr); - } else - debug("CS%d is disabled.\n", i); + set_csn_config(dimm_number, i, ddr, popts, dimm_params); + set_csn_config_2(i, ddr); } /* @@ -1560,7 +1611,7 @@ compute_fsl_memctl_config_regs(const memctl_options_t *popts, set_ddr_eor(ddr, popts); #if !defined(CONFIG_FSL_DDR1) - set_timing_cfg_0(ddr, popts); + set_timing_cfg_0(ddr, popts, dimm_params); #endif set_timing_cfg_3(ddr, popts, common_dimm, cas_latency); @@ -1569,6 +1620,7 @@ compute_fsl_memctl_config_regs(const memctl_options_t *popts, cas_latency, additive_latency); set_ddr_cdr1(ddr, popts); + set_ddr_cdr2(ddr, popts); set_ddr_sdram_cfg(ddr, popts, common_dimm); ip_rev = fsl_ddr_get_version(); if (ip_rev > 0x40400) diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/interactive.c b/arch/powerpc/cpu/mpc8xxx/ddr/interactive.c index f59d105..cb71f94 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/interactive.c +++ b/arch/powerpc/cpu/mpc8xxx/ddr/interactive.c @@ -452,6 +452,8 @@ static void fsl_ddr_options_edit(fsl_ddr_info_t *pinfo, CTRL_OPTIONS(rcw_override), CTRL_OPTIONS(rcw_1), CTRL_OPTIONS(rcw_2), + CTRL_OPTIONS(ddr_cdr1), + CTRL_OPTIONS(ddr_cdr2), CTRL_OPTIONS(tCKE_clock_pulse_width_ps), CTRL_OPTIONS(tFAW_window_four_activates_ps), CTRL_OPTIONS(trwt_override), @@ -518,6 +520,8 @@ static void print_fsl_memctl_config_regs(const fsl_ddr_cfg_regs_t *ddr) CFG_REGS(timing_cfg_5), CFG_REGS(ddr_zq_cntl), CFG_REGS(ddr_wrlvl_cntl), + CFG_REGS(ddr_wrlvl_cntl_2), + CFG_REGS(ddr_wrlvl_cntl_3), CFG_REGS(ddr_sr_cntr), CFG_REGS(ddr_sdram_rcw_1), CFG_REGS(ddr_sdram_rcw_2), @@ -525,6 +529,7 @@ static void print_fsl_memctl_config_regs(const fsl_ddr_cfg_regs_t *ddr) CFG_REGS(ddr_cdr2), CFG_REGS(err_disable), CFG_REGS(err_int_en), + CFG_REGS(ddr_eor), }; static const unsigned int n_opts = ARRAY_SIZE(options); @@ -584,6 +589,8 @@ static void fsl_ddr_regs_edit(fsl_ddr_info_t *pinfo, CFG_REGS(timing_cfg_5), CFG_REGS(ddr_zq_cntl), CFG_REGS(ddr_wrlvl_cntl), + CFG_REGS(ddr_wrlvl_cntl_2), + CFG_REGS(ddr_wrlvl_cntl_3), CFG_REGS(ddr_sr_cntr), CFG_REGS(ddr_sdram_rcw_1), CFG_REGS(ddr_sdram_rcw_2), @@ -593,7 +600,7 @@ static void fsl_ddr_regs_edit(fsl_ddr_info_t *pinfo, CFG_REGS(err_int_en), CFG_REGS(ddr_sdram_rcw_2), CFG_REGS(ddr_sdram_rcw_2), - + CFG_REGS(ddr_eor), }; static const unsigned int n_opts = ARRAY_SIZE(options); @@ -689,6 +696,8 @@ static void print_memctl_options(const memctl_options_t *popts) CTRL_OPTIONS(rcw_override), CTRL_OPTIONS(rcw_1), CTRL_OPTIONS(rcw_2), + CTRL_OPTIONS_HEX(ddr_cdr1), + CTRL_OPTIONS_HEX(ddr_cdr2), CTRL_OPTIONS(tCKE_clock_pulse_width_ps), CTRL_OPTIONS(tFAW_window_four_activates_ps), CTRL_OPTIONS(trwt_override), @@ -1597,6 +1606,7 @@ unsigned long long fsl_ddr_interactive(fsl_ddr_info_t *pinfo) * doesn't return */ do_reset(NULL, 0, 0, NULL); + printf("Reset didn't work\n"); } if (strcmp(argv[0], "recompute") == 0) { diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c b/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c index 03a784c..6a1f4e4 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c +++ b/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c @@ -76,7 +76,7 @@ compute_cas_latency_ddr3(const dimm_params_t *dimm_params, unsigned int compute_lowest_common_dimm_parameters(const dimm_params_t *dimm_params, common_timing_params_t *outpdimm, - unsigned int number_of_dimms) + const unsigned int number_of_dimms) { unsigned int i, j; @@ -126,13 +126,20 @@ compute_lowest_common_dimm_parameters(const dimm_params_t *dimm_params, temp1++; continue; } + + /* + * check if quad-rank DIMM is plugged if + * CONFIG_CHIP_SELECT_QUAD_CAPABLE is not defined + * Only the board with proper design is capable + */ +#ifndef CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE if (dimm_params[i].n_ranks == 4 && \ CONFIG_CHIP_SELECTS_PER_CTRL/CONFIG_DIMM_SLOTS_PER_CTLR < 4) { printf("Found Quad-rank DIMM, not able to support."); temp1++; continue; } - +#endif /* * Find minimum tCKmax_ps to find fastest slow speed, * i.e., this is the slowest the whole system can go. @@ -236,11 +243,14 @@ compute_lowest_common_dimm_parameters(const dimm_params_t *dimm_params, if (outpdimm->all_DIMMs_registered) for (j = 0; j < 16; j++) { outpdimm->rcw[j] = dimm_params[0].rcw[j]; - for (i = 1; i < number_of_dimms; i++) + for (i = 1; i < number_of_dimms; i++) { + if (!dimm_params[i].n_ranks) + continue; if (dimm_params[i].rcw[j] != dimm_params[0].rcw[j]) { temp1 = 1; break; } + } } if (temp1 != 0) diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/main.c b/arch/powerpc/cpu/mpc8xxx/ddr/main.c index b47268c..d6b73c7 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/main.c +++ b/arch/powerpc/cpu/mpc8xxx/ddr/main.c @@ -77,7 +77,19 @@ static void __get_spd(generic_spd_eeprom_t *spd, u8 i2c_address) sizeof(generic_spd_eeprom_t)); if (ret) { - printf("DDR: failed to read SPD from address %u\n", i2c_address); + if (i2c_address == +#ifdef SPD_EEPROM_ADDRESS + SPD_EEPROM_ADDRESS +#elif defined(SPD_EEPROM_ADDRESS1) + SPD_EEPROM_ADDRESS1 +#endif + ) { + printf("DDR: failed to read SPD from address %u\n", + i2c_address); + } else { + debug("DDR: failed to read SPD from address %u\n", + i2c_address); + } memset(spd, 0, sizeof(generic_spd_eeprom_t)); } } @@ -526,6 +538,17 @@ phys_size_t fsl_ddr_sdram(void) #endif total_memory = fsl_ddr_compute(&info, STEP_GET_SPD, 0); + /* setup 3-way interleaving before enabling DDRC */ + switch (info.memctl_opts[0].memctl_interleaving_mode) { + case FSL_DDR_3WAY_1KB_INTERLEAVING: + case FSL_DDR_3WAY_4KB_INTERLEAVING: + case FSL_DDR_3WAY_8KB_INTERLEAVING: + fsl_ddr_set_intl3r(info.memctl_opts[0].memctl_interleaving_mode); + break; + default: + break; + } + /* Program configuration registers. */ for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) { debug("Programming controller %u\n", i); @@ -561,7 +584,6 @@ phys_size_t fsl_ddr_sdram(void) case FSL_DDR_3WAY_8KB_INTERLEAVING: law_memctl = LAW_TRGT_IF_DDR_INTLV_123; if (i == 0) { - fsl_ddr_set_intl3r(info.memctl_opts[i].memctl_interleaving_mode); fsl_ddr_set_lawbar(&info.common_timing_params[i], law_memctl, i); } diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/options.c b/arch/powerpc/cpu/mpc8xxx/ddr/options.c index 13e4825..2f13b8f 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/options.c +++ b/arch/powerpc/cpu/mpc8xxx/ddr/options.c @@ -474,6 +474,34 @@ static const struct dynamic_odt odt_unknown[4] = { } }; #endif + +/* + * Automatically seleect bank interleaving mode based on DIMMs + * in this order: cs0_cs1_cs2_cs3, cs0_cs1, null. + * This function only deal with one or two slots per controller. + */ +static inline unsigned int auto_bank_intlv(dimm_params_t *pdimm) +{ +#if (CONFIG_DIMM_SLOTS_PER_CTLR == 1) + if (pdimm[0].n_ranks == 4) + return FSL_DDR_CS0_CS1_CS2_CS3; + else if (pdimm[0].n_ranks == 2) + return FSL_DDR_CS0_CS1; +#elif (CONFIG_DIMM_SLOTS_PER_CTLR == 2) +#ifdef CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE + if (pdimm[0].n_ranks == 4) + return FSL_DDR_CS0_CS1_CS2_CS3; +#endif + if (pdimm[0].n_ranks == 2) { + if (pdimm[1].n_ranks == 2) + return FSL_DDR_CS0_CS1_CS2_CS3; + else + return FSL_DDR_CS0_CS1; + } +#endif + return 0; +} + unsigned int populate_memctl_options(int all_DIMMs_registered, memctl_options_t *popts, dimm_params_t *pdimm, @@ -510,6 +538,14 @@ unsigned int populate_memctl_options(int all_DIMMs_registered, } } else if (CONFIG_DIMM_SLOTS_PER_CTLR == 2) { switch (pdimm[0].n_ranks) { +#ifdef CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE + case 4: + pdodt = single_Q; + if (pdimm[1].n_ranks) + printf("Error: Quad- and Dual-rank DIMMs " + "cannot be used together\n"); + break; +#endif case 2: switch (pdimm[1].n_ranks) { case 2: @@ -900,6 +936,9 @@ done: else if (hwconfig_subarg_cmp_f("fsl_ddr", "bank_intlv", "cs0_cs1_cs2_cs3", buf)) popts->ba_intlv_ctl = FSL_DDR_CS0_CS1_CS2_CS3; + else if (hwconfig_subarg_cmp_f("fsl_ddr", "bank_intlv", + "auto", buf)) + popts->ba_intlv_ctl = auto_bank_intlv(pdimm); else printf("hwconfig has unrecognized parameter for bank_intlv.\n"); switch (popts->ba_intlv_ctl & FSL_DDR_CS0_CS1_CS2_CS3) { @@ -912,6 +951,10 @@ done: "interleaving disabled!\n", ctrl_num); } #elif (CONFIG_DIMM_SLOTS_PER_CTLR == 2) +#ifdef CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE + if (pdimm[0].n_ranks == 4) + break; +#endif if ((pdimm[0].n_ranks < 2) && (pdimm[1].n_ranks < 2)) { popts->ba_intlv_ctl = 0; printf("Not enough bank(chip-select) for " @@ -1063,7 +1106,7 @@ void check_interleaving_options(fsl_ddr_info_t *pinfo) break; } debug("%d of %d controllers are interleaving.\n", j, k); - if (j != k) { + if (j && (j != k)) { for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) pinfo->memctl_opts[i].memctl_interleaving = 0; printf("Not all controllers have compatible " diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/util.c b/arch/powerpc/cpu/mpc8xxx/ddr/util.c index 664ad09..940ffff 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/util.c +++ b/arch/powerpc/cpu/mpc8xxx/ddr/util.c @@ -121,6 +121,16 @@ void fsl_ddr_set_intl3r(const unsigned int granule_size) #endif } +u32 fsl_ddr_get_intl3r(void) +{ + u32 val = 0; +#ifdef CONFIG_E6500 + u32 *mcintl3r = (void *) (CONFIG_SYS_IMMR + 0x18004); + val = *mcintl3r; +#endif + return val; +} + void board_add_ram_info(int use_default) { #if defined(CONFIG_MPC83xx) @@ -140,6 +150,18 @@ void board_add_ram_info(int use_default) uint32_t sdram_cfg = in_be32(&ddr->sdram_cfg); int cas_lat; +#if CONFIG_NUM_DDR_CONTROLLERS >= 2 + if (!(sdram_cfg & SDRAM_CFG_MEM_EN)) { + ddr = (void __iomem *)CONFIG_SYS_MPC85xx_DDR2_ADDR; + sdram_cfg = in_be32(&ddr->sdram_cfg); + } +#endif +#if CONFIG_NUM_DDR_CONTROLLERS >= 3 + if (!(sdram_cfg & SDRAM_CFG_MEM_EN)) { + ddr = (void __iomem *)CONFIG_SYS_MPC85xx_DDR3_ADDR; + sdram_cfg = in_be32(&ddr->sdram_cfg); + } +#endif puts(" (DDR"); switch ((sdram_cfg & SDRAM_CFG_SDRAM_TYPE_MASK) >> SDRAM_CFG_SDRAM_TYPE_SHIFT) { diff --git a/arch/powerpc/cpu/mpc8xxx/fdt.c b/arch/powerpc/cpu/mpc8xxx/fdt.c index 32ab050..68db8e2 100644 --- a/arch/powerpc/cpu/mpc8xxx/fdt.c +++ b/arch/powerpc/cpu/mpc8xxx/fdt.c @@ -139,6 +139,8 @@ void fdt_fixup_dr_usb(void *blob, bd_t *bd) const char *phys[] = { "ulpi", "utmi" }; const char *mode = NULL; const char *phy_type = NULL; + const char *dr_mode_type = NULL; + const char *dr_phy_type = NULL; char usb1_defined = 0; int usb_mode_off = -1; int usb_phy_off = -1; @@ -156,6 +158,7 @@ void fdt_fixup_dr_usb(void *blob, bd_t *bd) break; } } + for (j = 0; j < ARRAY_SIZE(phys); j++) { if (hwconfig_subarg_cmp(str, "phy_type", phys[j])) { @@ -163,31 +166,46 @@ void fdt_fixup_dr_usb(void *blob, bd_t *bd) break; } } - if (mode_idx >= 0) { - usb_mode_off = fdt_fixup_usb_mode_phy_type(blob, - modes[mode_idx], NULL, usb_mode_off); - if (usb_mode_off < 0) - return; - } - if (phy_idx >= 0) { - usb_phy_off = fdt_fixup_usb_mode_phy_type(blob, - NULL, phys[phy_idx], usb_phy_off); - if (usb_phy_off < 0) - return; - } + + dr_mode_type = modes[mode_idx]; + dr_phy_type = phys[phy_idx]; + + /* use usb_dr_mode and usb_phy_type if + usb1_defined = 0; these variables are to + be deprecated */ if (!strcmp(str, "usb1")) usb1_defined = 1; - if (mode_idx < 0 && phy_idx < 0) + + if (mode_idx < 0 && phy_idx < 0) { printf("WARNING: invalid phy or mode\n"); + return; + } } + + usb_mode_off = fdt_fixup_usb_mode_phy_type(blob, + dr_mode_type, NULL, usb_mode_off); + + if (usb_mode_off < 0) + return; + + usb_phy_off = fdt_fixup_usb_mode_phy_type(blob, + NULL, dr_phy_type, usb_phy_off); + + if (usb_phy_off < 0) + return; } + if (!usb1_defined) { int usb_off = -1; mode = getenv("usb_dr_mode"); phy_type = getenv("usb_phy_type"); - if (!mode && !phy_type) - return; - fdt_fixup_usb_mode_phy_type(blob, mode, phy_type, usb_off); + if (mode || phy_type) { + printf("WARNING: usb_dr_mode and usb_phy_type " + "are to be deprecated soon. Use " + "hwconfig to set these values instead!!\n"); + fdt_fixup_usb_mode_phy_type(blob, mode, + phy_type, usb_off); + } } } #endif /* defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB) */ diff --git a/arch/powerpc/cpu/mpc8xxx/srio.c b/arch/powerpc/cpu/mpc8xxx/srio.c index 0cb65b3..6e6f7dc 100644 --- a/arch/powerpc/cpu/mpc8xxx/srio.c +++ b/arch/powerpc/cpu/mpc8xxx/srio.c @@ -22,7 +22,9 @@ #include <asm/fsl_law.h> #include <asm/fsl_serdes.h> #include <asm/fsl_srio.h> +#include <asm/errno.h> +#ifdef CONFIG_SYS_FSL_SRIO_PCIE_BOOT_MASTER #define SRIO_PORT_ACCEPT_ALL 0x10000001 #define SRIO_IB_ATMU_AR 0x80f55000 #define SRIO_OB_ATMU_AR_MAINT 0x80077000 @@ -31,10 +33,16 @@ #define SRIO_MAINT_WIN_SIZE 0x1000000 /* 16M */ #define SRIO_RW_WIN_SIZE 0x100000 /* 1M */ #define SRIO_LCSBA1CSR 0x60000000 +#endif #if defined(CONFIG_FSL_CORENET) +#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2 + #define _DEVDISR_SRIO1 FSL_CORENET_DEVDISR3_SRIO1 + #define _DEVDISR_SRIO2 FSL_CORENET_DEVDISR3_SRIO2 +#else #define _DEVDISR_SRIO1 FSL_CORENET_DEVDISR_SRIO1 #define _DEVDISR_SRIO2 FSL_CORENET_DEVDISR_SRIO2 +#endif #define _DEVDISR_RMU FSL_CORENET_DEVDISR_RMU #define CONFIG_SYS_MPC8xxx_GUTS_ADDR CONFIG_SYS_MPC85xx_GUTS_ADDR #elif defined(CONFIG_MPC85xx) @@ -52,16 +60,206 @@ #error "No defines for DEVDISR_SRIO" #endif +#ifdef CONFIG_SYS_FSL_ERRATUM_SRIO_A004034 +/* + * Erratum A-004034 + * Affects: SRIO + * Description: During port initialization, the SRIO port performs + * lane synchronization (detecting valid symbols on a lane) and + * lane alignment (coordinating multiple lanes to receive valid data + * across lanes). Internal errors in lane synchronization and lane + * alignment may cause failure to achieve link initialization at + * the configured port width. + * An SRIO port configured as a 4x port may see one of these scenarios: + * 1. One or more lanes fails to achieve lane synchronization. Depending + * on which lanes fail, this may result in downtraining from 4x to 1x + * on lane 0, 4x to 1x on lane R (redundant lane). + * 2. The link may fail to achieve lane alignment as a 4x, even though + * all 4 lanes achieve lane synchronization, and downtrain to a 1x. + * An SRIO port configured as a 1x port may fail to complete port + * initialization (PnESCSR[PU] never deasserts) because of scenario 1. + * Impact: SRIO port may downtrain to 1x, or may fail to complete + * link initialization. Once a port completes link initialization + * successfully, it will operate normally. + */ +static int srio_erratum_a004034(u8 port) +{ + serdes_corenet_t *srds_regs; + u32 conf_lane; + u32 init_lane; + int idx, first, last; + u32 i; + unsigned long long end_tick; + struct ccsr_rio *srio_regs = (void *)CONFIG_SYS_FSL_SRIO_ADDR; + + srds_regs = (void *)(CONFIG_SYS_FSL_CORENET_SERDES_ADDR); + conf_lane = (in_be32((void *)&srds_regs->srdspccr0) + >> (12 - port * 4)) & 0x3; + init_lane = (in_be32((void *)&srio_regs->lp_serial + .port[port].pccsr) >> 27) & 0x7; + + /* + * Start a counter set to ~2 ms after the SERDES reset is + * complete (SERDES SRDSBnRSTCTL[RST_DONE]=1 for n + * corresponding to the SERDES bank/PLL for the SRIO port). + */ + if (in_be32((void *)&srds_regs->bank[0].rstctl) + & SRDS_RSTCTL_RSTDONE) { + /* + * Poll the port uninitialized status (SRIO PnESCSR[PO]) until + * PO=1 or the counter expires. If the counter expires, the + * port has failed initialization: go to recover steps. If PO=1 + * and the desired port width is 1x, go to normal steps. If + * PO = 1 and the desired port width is 4x, go to recover steps. + */ + end_tick = usec2ticks(2000) + get_ticks(); + do { + if (in_be32((void *)&srio_regs->lp_serial + .port[port].pescsr) & 0x2) { + if (conf_lane == 0x1) + goto host_ok; + else { + if (init_lane == 0x2) + goto host_ok; + else + break; + } + } + } while (end_tick > get_ticks()); + + /* recover at most 3 times */ + for (i = 0; i < 3; i++) { + /* Set SRIO PnCCSR[PD]=1 */ + setbits_be32((void *)&srio_regs->lp_serial + .port[port].pccsr, + 0x800000); + /* + * Set SRIO PnPCR[OBDEN] on the host to + * enable the discarding of any pending packets. + */ + setbits_be32((void *)&srio_regs->impl.port[port].pcr, + 0x04); + /* Wait 50 us */ + udelay(50); + /* Run sync command */ + isync(); + + if (port) + first = serdes_get_first_lane(SRIO2); + else + first = serdes_get_first_lane(SRIO1); + if (unlikely(first < 0)) + return -ENODEV; + if (conf_lane == 0x1) + last = first; + else + last = first + 3; + /* + * Set SERDES BnGCRm0[RRST]=0 for each SRIO + * bank n and lane m. + */ + for (idx = first; idx <= last; idx++) + clrbits_be32(&srds_regs->lane[idx].gcr0, + SRDS_GCR0_RRST); + /* + * Read SERDES BnGCRm0 for each SRIO + * bank n and lane m + */ + for (idx = first; idx <= last; idx++) + in_be32(&srds_regs->lane[idx].gcr0); + /* Run sync command */ + isync(); + /* Wait >= 100 ns */ + udelay(1); + /* + * Set SERDES BnGCRm0[RRST]=1 for each SRIO + * bank n and lane m. + */ + for (idx = first; idx <= last; idx++) + setbits_be32(&srds_regs->lane[idx].gcr0, + SRDS_GCR0_RRST); + /* + * Read SERDES BnGCRm0 for each SRIO + * bank n and lane m + */ + for (idx = first; idx <= last; idx++) + in_be32(&srds_regs->lane[idx].gcr0); + /* Run sync command */ + isync(); + /* Wait >= 300 ns */ + udelay(1); + + /* Write 1 to clear all bits in SRIO PnSLCSR */ + out_be32((void *)&srio_regs->impl.port[port].slcsr, + 0xffffffff); + /* Clear SRIO PnPCR[OBDEN] on the host */ + clrbits_be32((void *)&srio_regs->impl.port[port].pcr, + 0x04); + /* Set SRIO PnCCSR[PD]=0 */ + clrbits_be32((void *)&srio_regs->lp_serial + .port[port].pccsr, + 0x800000); + /* Wait >= 24 ms */ + udelay(24000); + /* Poll the state of the port again */ + init_lane = + (in_be32((void *)&srio_regs->lp_serial + .port[port].pccsr) >> 27) & 0x7; + if (in_be32((void *)&srio_regs->lp_serial + .port[port].pescsr) & 0x2) { + if (conf_lane == 0x1) + goto host_ok; + else { + if (init_lane == 0x2) + goto host_ok; + } + } + if (i == 2) + return -ENODEV; + } + } else + return -ENODEV; + +host_ok: + /* Poll PnESCSR[OES] on the host until it is clear */ + end_tick = usec2ticks(1000000) + get_ticks(); + do { + if (!(in_be32((void *)&srio_regs->lp_serial.port[port].pescsr) + & 0x10000)) { + out_be32(((void *)&srio_regs->lp_serial + .port[port].pescsr), 0xffffffff); + out_be32(((void *)&srio_regs->phys_err + .port[port].edcsr), 0); + out_be32(((void *)&srio_regs->logical_err.ltledcsr), 0); + return 0; + } + } while (end_tick > get_ticks()); + + return -ENODEV; +} +#endif + void srio_init(void) { ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC8xxx_GUTS_ADDR; int srio1_used = 0, srio2_used = 0; + u32 *devdisr; +#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2 + devdisr = &gur->devdisr3; +#else + devdisr = &gur->devdisr; +#endif if (is_serdes_configured(SRIO1)) { set_next_law(CONFIG_SYS_SRIO1_MEM_PHYS, law_size_bits(CONFIG_SYS_SRIO1_MEM_SIZE), LAW_TRGT_IF_RIO_1); srio1_used = 1; +#ifdef CONFIG_SYS_FSL_ERRATUM_SRIO_A004034 + if (srio_erratum_a004034(0) < 0) + printf("SRIO1: enabled but port error\n"); + else +#endif printf("SRIO1: enabled\n"); } else { printf("SRIO1: disabled\n"); @@ -73,7 +271,13 @@ void srio_init(void) law_size_bits(CONFIG_SYS_SRIO2_MEM_SIZE), LAW_TRGT_IF_RIO_2); srio2_used = 1; +#ifdef CONFIG_SYS_FSL_ERRATUM_SRIO_A004034 + if (srio_erratum_a004034(1) < 0) + printf("SRIO2: enabled but port error\n"); + else +#endif printf("SRIO2: enabled\n"); + } else { printf("SRIO2: disabled\n"); } @@ -82,20 +286,20 @@ void srio_init(void) #ifdef CONFIG_FSL_CORENET /* On FSL_CORENET devices we can disable individual ports */ if (!srio1_used) - setbits_be32(&gur->devdisr, FSL_CORENET_DEVDISR_SRIO1); + setbits_be32(devdisr, _DEVDISR_SRIO1); if (!srio2_used) - setbits_be32(&gur->devdisr, FSL_CORENET_DEVDISR_SRIO2); + setbits_be32(devdisr, _DEVDISR_SRIO2); #endif /* neither port is used - disable everything */ if (!srio1_used && !srio2_used) { - setbits_be32(&gur->devdisr, _DEVDISR_SRIO1); - setbits_be32(&gur->devdisr, _DEVDISR_SRIO2); - setbits_be32(&gur->devdisr, _DEVDISR_RMU); + setbits_be32(devdisr, _DEVDISR_SRIO1); + setbits_be32(devdisr, _DEVDISR_SRIO2); + setbits_be32(devdisr, _DEVDISR_RMU); } } -#ifdef CONFIG_FSL_CORENET +#ifdef CONFIG_SYS_FSL_SRIO_PCIE_BOOT_MASTER void srio_boot_master(int port) { struct ccsr_rio *srio = (void *)CONFIG_SYS_FSL_SRIO_ADDR; diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h index aa27741..03baaee 100644 --- a/arch/powerpc/include/asm/config_mpc85xx.h +++ b/arch/powerpc/include/asm/config_mpc85xx.h @@ -27,6 +27,8 @@ #error "Do not define CONFIG_SYS_CCSRBAR_DEFAULT in the board header file." #endif +#define FSL_DDR_VER_4_7 47 + /* Number of TLB CAM entries we have on FSL Book-E chips */ #if defined(CONFIG_E500MC) #define CONFIG_SYS_NUM_TLBCAMS 64 @@ -311,6 +313,7 @@ #define CONFIG_SYS_FSL_SRIO_MSG_UNIT_NUM 2 #elif defined(CONFIG_PPC_P2041) /* also supports P2040 */ +#define CONFIG_SYS_FSL_QORIQ_CHASSIS1 #define CONFIG_MAX_CPUS 4 #define CONFIG_SYS_FSL_NUM_CC_PLLS 2 #define CONFIG_SYS_FSL_NUM_LAWS 32 @@ -331,6 +334,7 @@ #define CONFIG_SYS_FSL_ERRATUM_NMG_CPU_A011 #define CONFIG_SYS_FSL_ERRATUM_CPU_A003999 #define CONFIG_SYS_FSL_ERRATUM_DDR_A003474 +#define CONFIG_SYS_FSL_SRIO_PCIE_BOOT_MASTER #define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2 #define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9 #define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5 @@ -338,8 +342,10 @@ #define CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV 0x10 #define CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV2 0x11 #define CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY 0xf0000000 +#define CONFIG_SYS_FSL_ERRATUM_SRIO_A004034 #elif defined(CONFIG_PPC_P3041) +#define CONFIG_SYS_FSL_QORIQ_CHASSIS1 #define CONFIG_MAX_CPUS 4 #define CONFIG_SYS_FSL_NUM_CC_PLLS 2 #define CONFIG_SYS_FSL_NUM_LAWS 32 @@ -360,6 +366,7 @@ #define CONFIG_SYS_FSL_ERRATUM_NMG_CPU_A011 #define CONFIG_SYS_FSL_ERRATUM_CPU_A003999 #define CONFIG_SYS_FSL_ERRATUM_DDR_A003474 +#define CONFIG_SYS_FSL_SRIO_PCIE_BOOT_MASTER #define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2 #define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9 #define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5 @@ -367,8 +374,10 @@ #define CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV 0x10 #define CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV2 0x11 #define CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY 0xf0000000 +#define CONFIG_SYS_FSL_ERRATUM_SRIO_A004034 #elif defined(CONFIG_PPC_P4080) /* also supports P4040 */ +#define CONFIG_SYS_FSL_QORIQ_CHASSIS1 #define CONFIG_MAX_CPUS 8 #define CONFIG_SYS_FSL_NUM_CC_PLLS 4 #define CONFIG_SYS_FSL_NUM_LAWS 32 @@ -389,7 +398,7 @@ #define CONFIG_SYS_FSL_ERRATUM_ELBC_A001 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111 #define CONFIG_SYS_FSL_ERRATUM_ESDHC135 -#define CONFIG_SYS_FSL_ERRATUM_ESDHC136 +#define CONFIG_SYS_FSL_ERRATUM_ESDHC13 #define CONFIG_SYS_P4080_ERRATUM_CPU22 #define CONFIG_SYS_FSL_ERRATUM_NMG_CPU_A011 #define CONFIG_SYS_P4080_ERRATUM_SERDES8 @@ -398,6 +407,7 @@ #define CONFIG_SYS_P4080_ERRATUM_SERDES_A005 #define CONFIG_SYS_FSL_ERRATUM_CPU_A003999 #define CONFIG_SYS_FSL_ERRATUM_DDR_A003474 +#define CONFIG_SYS_FSL_SRIO_PCIE_BOOT_MASTER #define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2 #define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9 #define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5 @@ -406,8 +416,11 @@ #define CONFIG_SYS_FSL_ERRATUM_A004510 #define CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV 0x20 #define CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY 0xff000000 +#define CONFIG_SYS_FSL_ERRATUM_SRIO_A004034 #elif defined(CONFIG_PPC_P5020) /* also supports P5010 */ +#define CONFIG_SYS_PPC64 /* 64-bit core */ +#define CONFIG_SYS_FSL_QORIQ_CHASSIS1 #define CONFIG_MAX_CPUS 2 #define CONFIG_SYS_FSL_NUM_CC_PLLS 2 #define CONFIG_SYS_FSL_NUM_LAWS 32 @@ -426,12 +439,43 @@ #define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY #define CONFIG_SYS_FSL_ERRATUM_ESDHC111 #define CONFIG_SYS_FSL_ERRATUM_DDR_A003474 +#define CONFIG_SYS_FSL_SRIO_PCIE_BOOT_MASTER #define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2 #define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9 #define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5 #define CONFIG_SYS_FSL_ERRATUM_A004510 #define CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV 0x10 #define CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY 0xc0000000 +#define CONFIG_SYS_FSL_ERRATUM_SRIO_A004034 + +#elif defined(CONFIG_PPC_P5040) +#define CONFIG_SYS_FSL_QORIQ_CHASSIS1 +#define CONFIG_MAX_CPUS 4 +#define CONFIG_SYS_FSL_NUM_CC_PLLS 3 +#define CONFIG_SYS_FSL_NUM_LAWS 32 +#define CONFIG_SYS_FSL_SEC_COMPAT 4 +#define CONFIG_SYS_NUM_FMAN 2 +#define CONFIG_SYS_NUM_FM1_DTSEC 5 +#define CONFIG_SYS_NUM_FM1_10GEC 1 +#define CONFIG_SYS_NUM_FM2_DTSEC 5 +#define CONFIG_SYS_NUM_FM2_10GEC 1 +#define CONFIG_NUM_DDR_CONTROLLERS 2 +#define CONFIG_SYS_FM_MURAM_SIZE 0x28000 +#define CONFIG_SYS_FSL_TBCLK_DIV 16 +#define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.4" +#define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000 +#define CONFIG_SYS_FSL_USB1_PHY_ENABLE +#define CONFIG_SYS_FSL_USB2_PHY_ENABLE +#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY +#define CONFIG_SYS_FSL_ERRATUM_ESDHC111 +#define CONFIG_SYS_FSL_ERRATUM_USB138 +#define CONFIG_SYS_FSL_ERRATUM_DDR_A003 +#define CONFIG_SYS_FSL_ERRATUM_DDR_A003474 +#define CONFIG_SYS_FSL_ERRATUM_A004699 +#define CONFIG_SYS_FSL_ELBC_MULTIBIT_ECC +#define CONFIG_SYS_FSL_ERRATUM_A004510 +#define CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV 0x10 +#define CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY 0xf0000000 #elif defined(CONFIG_BSC9131) #define CONFIG_MAX_CPUS 1 @@ -445,6 +489,63 @@ #define CONFIG_SYS_FSL_ERRATUM_IFC_A003399 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111 +#elif defined(CONFIG_PPC_T4240) +#define CONFIG_SYS_PPC64 /* 64-bit core */ +#define CONFIG_FSL_CORENET /* Freescale CoreNet platform */ +#define CONFIG_SYS_FSL_QORIQ_CHASSIS2 /* Freescale Chassis generation 2 */ +#define CONFIG_SYS_FSL_QMAN_V3 /* QMAN version 3 */ +#define CONFIG_MAX_CPUS 12 +#define CONFIG_SYS_FSL_NUM_CC_PLLS 5 +#define CONFIG_SYS_FSL_NUM_LAWS 32 +#define CONFIG_SYS_FSL_SRDS_3 +#define CONFIG_SYS_FSL_SRDS_4 +#define CONFIG_SYS_FSL_SEC_COMPAT 4 +#define CONFIG_SYS_NUM_FMAN 2 +#define CONFIG_SYS_NUM_FM1_DTSEC 8 +#define CONFIG_SYS_NUM_FM1_10GEC 2 +#define CONFIG_SYS_NUM_FM2_DTSEC 8 +#define CONFIG_SYS_NUM_FM2_10GEC 2 +#define CONFIG_NUM_DDR_CONTROLLERS 3 +#define CONFIG_SYS_FSL_DDR_VER FSL_DDR_VER_4_7 +#define CONFIG_SYS_FMAN_V3 +#define CONFIG_SYS_FM_MURAM_SIZE 0x60000 +#define CONFIG_SYS_FSL_TBCLK_DIV 16 +#define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v3.0" +#define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2 +#define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9 +#define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5 +#define CONFIG_SYS_FSL_USB1_PHY_ENABLE +#define CONFIG_SYS_FSL_USB2_PHY_ENABLE +#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY +#define CONFIG_SYS_FSL_ERRATUM_A004468 +#define CONFIG_SYS_FSL_ERRATUM_A_004934 +#define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000 + +#elif defined(CONFIG_PPC_B4860) +#define CONFIG_SYS_PPC64 /* 64-bit core */ +#define CONFIG_FSL_CORENET /* Freescale CoreNet platform */ +#define CONFIG_SYS_FSL_QORIQ_CHASSIS2 /* Freescale Chassis generation 2 */ +#define CONFIG_SYS_FSL_QMAN_V3 /* QMAN version 3 */ +#define CONFIG_MAX_CPUS 4 +#define CONFIG_SYS_FSL_NUM_CC_PLLS 4 +#define CONFIG_SYS_FSL_NUM_LAWS 32 +#define CONFIG_SYS_FSL_SEC_COMPAT 4 +#define CONFIG_SYS_NUM_FMAN 1 +#define CONFIG_SYS_NUM_FM1_DTSEC 6 +#define CONFIG_SYS_NUM_FM1_10GEC 2 +#define CONFIG_NUM_DDR_CONTROLLERS 1 +#define CONFIG_SYS_FSL_DDR_VER FSL_DDR_VER_4_7 +#define CONFIG_SYS_FMAN_V3 +#define CONFIG_SYS_FM_MURAM_SIZE 0x60000 +#define CONFIG_SYS_FSL_TBCLK_DIV 16 +#define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.4" +#define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2 +#define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9 +#define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5 +#define CONFIG_SYS_FSL_USB1_PHY_ENABLE +#define CONFIG_SYS_FSL_ERRATUM_A_004934 +#define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000 + #else #error Processor type not defined for this platform #endif diff --git a/arch/powerpc/include/asm/fsl_ddr_sdram.h b/arch/powerpc/include/asm/fsl_ddr_sdram.h index e271342..640d329 100644 --- a/arch/powerpc/include/asm/fsl_ddr_sdram.h +++ b/arch/powerpc/include/asm/fsl_ddr_sdram.h @@ -84,6 +84,8 @@ typedef ddr3_spd_eeprom_t generic_spd_eeprom_t; #define FSL_DDR_4WAY_4KB_INTERLEAVING 0x1C #define FSL_DDR_4WAY_8KB_INTERLEAVING 0x1D +#define SDRAM_CS_CONFIG_EN 0x80000000 + /* DDR_SDRAM_CFG - DDR SDRAM Control Configuration */ #define SDRAM_CFG_MEM_EN 0x80000000 @@ -96,6 +98,7 @@ typedef ddr3_spd_eeprom_t generic_spd_eeprom_t; #define SDRAM_CFG_SDRAM_TYPE_SHIFT 24 #define SDRAM_CFG_DYN_PWR 0x00200000 #define SDRAM_CFG_DBW_MASK 0x00180000 +#define SDRAM_CFG_DBW_SHIFT 19 #define SDRAM_CFG_32_BE 0x00080000 #define SDRAM_CFG_16_BE 0x00100000 #define SDRAM_CFG_8_BE 0x00040000 @@ -145,6 +148,31 @@ typedef ddr3_spd_eeprom_t generic_spd_eeprom_t; /* DDR_CDR1 */ #define DDR_CDR1_DHC_EN 0x80000000 +#define DDR_CDR1_ODT_SHIFT 17 +#define DDR_CDR1_ODT_MASK 0x6 +#define DDR_CDR2_ODT_MASK 0x1 +#define DDR_CDR1_ODT(x) ((x & DDR_CDR1_ODT_MASK) << DDR_CDR1_ODT_SHIFT) +#define DDR_CDR2_ODT(x) (x & DDR_CDR2_ODT_MASK) + +#if (defined(CONFIG_SYS_FSL_DDR_VER) && \ + (CONFIG_SYS_FSL_DDR_VER >= FSL_DDR_VER_4_7)) +#define DDR_CDR_ODT_OFF 0x0 +#define DDR_CDR_ODT_120ohm 0x1 +#define DDR_CDR_ODT_180ohm 0x2 +#define DDR_CDR_ODT_75ohm 0x3 +#define DDR_CDR_ODT_110ohm 0x4 +#define DDR_CDR_ODT_60hm 0x5 +#define DDR_CDR_ODT_70ohm 0x6 +#define DDR_CDR_ODT_47ohm 0x7 +#else +#define DDR_CDR_ODT_75ohm 0x0 +#define DDR_CDR_ODT_55ohm 0x1 +#define DDR_CDR_ODT_60ohm 0x2 +#define DDR_CDR_ODT_50ohm 0x3 +#define DDR_CDR_ODT_150ohm 0x4 +#define DDR_CDR_ODT_43ohm 0x5 +#define DDR_CDR_ODT_120ohm 0x6 +#endif /* Record of register values computed */ typedef struct fsl_ddr_cfg_regs_s { @@ -177,6 +205,8 @@ typedef struct fsl_ddr_cfg_regs_s { unsigned int timing_cfg_5; unsigned int ddr_zq_cntl; unsigned int ddr_wrlvl_cntl; + unsigned int ddr_wrlvl_cntl_2; + unsigned int ddr_wrlvl_cntl_3; unsigned int ddr_sr_cntr; unsigned int ddr_sdram_rcw_1; unsigned int ddr_sdram_rcw_2; @@ -262,6 +292,8 @@ typedef struct memctl_options_s { unsigned int wrlvl_override; unsigned int wrlvl_sample; /* Write leveling */ unsigned int wrlvl_start; + unsigned int wrlvl_ctl_2; + unsigned int wrlvl_ctl_3; unsigned int half_strength_driver_enable; unsigned int twoT_en; @@ -288,6 +320,7 @@ typedef struct memctl_options_s { unsigned int rcw_2; /* control register 1 */ unsigned int ddr_cdr1; + unsigned int ddr_cdr2; unsigned int trwt_override; unsigned int trwt; /* read-to-write turnaround */ @@ -298,6 +331,7 @@ extern phys_size_t fsl_ddr_sdram_size(void); extern int fsl_use_spd(void); extern void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, unsigned int ctrl_num); +u32 fsl_ddr_get_intl3r(void); /* * The 85xx boards have a common prototype for fixed_sdram so put the diff --git a/arch/powerpc/include/asm/fsl_fman.h b/arch/powerpc/include/asm/fsl_fman.h index 2c0c9bc..299daca 100644 --- a/arch/powerpc/include/asm/fsl_fman.h +++ b/arch/powerpc/include/asm/fsl_fman.h @@ -423,6 +423,14 @@ typedef struct fm_10gec_mdio { u8 res[4*1024]; } fm_10gec_mdio_t; +typedef struct fm_memac { + u8 res[4*1024]; +} fm_memac_t; + +typedef struct fm_memac_mdio { + u8 res[4*1024]; +} fm_memac_mdio_t; + typedef struct fm_1588 { u8 res[4*1024]; } fm_1588_t; @@ -446,6 +454,14 @@ typedef struct ccsr_fman { u8 res1[8*1024]; fm_soft_parser_t fm_soft_parser; u8 res2[96*1024]; +#ifdef CONFIG_SYS_FMAN_V3 + struct { + fm_memac_t fm_memac; + fm_memac_mdio_t fm_memac_mdio; + } memac[10]; + u8 res4[32*1024]; + fm_memac_mdio_t fm_dedicated_mdio[2]; +#else struct { fm_dtsec_t fm_dtesc; fm_mdio_t fm_mdio; @@ -455,6 +471,7 @@ typedef struct ccsr_fman { fm_10gec_mdio_t fm_10gec_mdio; } mac_10g[1]; u8 res4[48*1024]; +#endif fm_1588_t fm_1588; u8 res5[4*1024]; } ccsr_fman_t; diff --git a/arch/powerpc/include/asm/fsl_liodn.h b/arch/powerpc/include/asm/fsl_liodn.h index a9973b8..d759de9 100644 --- a/arch/powerpc/include/asm/fsl_liodn.h +++ b/arch/powerpc/include/asm/fsl_liodn.h @@ -94,6 +94,11 @@ extern void fdt_fixup_liodn(void *blob); SET_GUTS_LIODN(compat, liodn, pex##pciNum##liodnr,\ CONFIG_SYS_MPC85xx_PCIE##pciNum##_OFFSET) +#define SET_PCI_LIODN_BASE(compat, pciNum, liodn) \ + SET_LIODN_ENTRY_1(compat, liodn,\ + offsetof(ccsr_pcix_t, liodn_base) + CONFIG_SYS_MPC85xx_PCIE##pciNum##_OFFSET,\ + CONFIG_SYS_MPC85xx_PCIE##pciNum##_OFFSET) + /* reg nodes for DMA start @ 0x300 */ #define SET_DMA_LIODN(dmaNum, liodn) \ SET_GUTS_LIODN("fsl,eloplus-dma", liodn, dma##dmaNum##liodnr,\ @@ -118,6 +123,12 @@ extern void fdt_fixup_liodn(void *blob); CONFIG_SYS_FSL_CORENET_PME_OFFSET, \ CONFIG_SYS_FSL_CORENET_PME_OFFSET) +#define SET_PMAN_LIODN(num, liodn) \ + SET_LIODN_ENTRY_2("fsl,pman", liodn, 0, \ + offsetof(struct ccsr_pman, ppa1) + \ + CONFIG_SYS_FSL_CORENET_PMAN##num##_OFFSET, \ + CONFIG_SYS_FSL_CORENET_PMAN##num##_OFFSET) + /* -1 from portID due to how immap has the registers */ #define FM_PPID_RX_PORT_OFFSET(fmNum, portID) \ CONFIG_SYS_FSL_FM##fmNum##_OFFSET + \ @@ -184,11 +195,13 @@ extern void fdt_fixup_liodn(void *blob); extern struct liodn_id_table liodn_tbl[], liodn_bases[], sec_liodn_tbl[]; extern struct liodn_id_table raide_liodn_tbl[]; extern struct liodn_id_table fman1_liodn_tbl[], fman2_liodn_tbl[]; +#ifdef CONFIG_SYS_SRIO extern struct srio_liodn_id_table srio_liodn_tbl[]; +extern int srio_liodn_tbl_sz; +#endif extern struct liodn_id_table rman_liodn_tbl[]; extern int liodn_tbl_sz, sec_liodn_tbl_sz, raide_liodn_tbl_sz; extern int fman1_liodn_tbl_sz, fman2_liodn_tbl_sz; -extern int srio_liodn_tbl_sz; extern int rman_liodn_tbl_sz; #endif diff --git a/arch/powerpc/include/asm/fsl_memac.h b/arch/powerpc/include/asm/fsl_memac.h new file mode 100644 index 0000000..d6b60e6 --- /dev/null +++ b/arch/powerpc/include/asm/fsl_memac.h @@ -0,0 +1,271 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * Roy Zang <tie-fei.zang@freescale.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __MEMAC_H__ +#define __MEMAC_H__ + +#include <phy.h> + +struct memac { + /* memac general control and status registers */ + u32 res_0[2]; + u32 command_config; /* Control and configuration register */ + u32 mac_addr_0; /* Lower 32 bits of 48-bit MAC address */ + u32 mac_addr_1; /* Upper 16 bits of 48-bit MAC address */ + u32 maxfrm; /* Maximum frame length register */ + u32 res_18[5]; + u32 hashtable_ctrl; /* Hash table control register */ + u32 res_30[4]; + u32 ievent; /* Interrupt event register */ + u32 tx_ipg_length; /* Transmitter inter-packet-gap register */ + u32 res_48; + u32 imask; /* interrupt mask register */ + u32 res_50; + u32 cl_pause_quanta[4]; /* CL01-CL67 pause quanta register */ + u32 cl_pause_thresh[4]; /* CL01-CL67 pause thresh register */ + u32 rx_pause_status; /* Receive pause status register */ + u32 res_78[2]; + u32 mac_addr[14]; /* MAC address */ + u32 lpwake_timer; /* EEE low power wakeup timer register */ + u32 sleep_timer; /* Transmit EEE Low Power Timer register */ + u32 res_c0[8]; + u32 statn_config; /* Statistics configuration register */ + u32 res_e4[7]; + + /* memac statistics counter registers */ + u32 rx_eoct_l; /* Rx ethernet octests lower */ + u32 rx_eoct_u; /* Rx ethernet octests upper */ + u32 rx_oct_l; /* Rx octests lower */ + u32 rx_oct_u; /* Rx octests upper */ + u32 rx_align_err_l; /* Rx alignment error lower */ + u32 rx_align_err_u; /* Rx alignment error upper */ + u32 rx_pause_frame_l; /* Rx valid pause frame upper */ + u32 rx_pause_frame_u; /* Rx valid pause frame upper */ + u32 rx_frame_l; /* Rx frame counter lower */ + u32 rx_frame_u; /* Rx frame counter upper */ + u32 rx_frame_crc_err_l; /* Rx frame check sequence error lower */ + u32 rx_frame_crc_err_u; /* Rx frame check sequence error upper */ + u32 rx_vlan_l; /* Rx VLAN frame lower */ + u32 rx_vlan_u; /* Rx VLAN frame upper */ + u32 rx_err_l; /* Rx frame error lower */ + u32 rx_err_u; /* Rx frame error upper */ + u32 rx_uni_l; /* Rx unicast frame lower */ + u32 rx_uni_u; /* Rx unicast frame upper */ + u32 rx_multi_l; /* Rx multicast frame lower */ + u32 rx_multi_u; /* Rx multicast frame upper */ + u32 rx_brd_l; /* Rx broadcast frame lower */ + u32 rx_brd_u; /* Rx broadcast frame upper */ + u32 rx_drop_l; /* Rx dropped packets lower */ + u32 rx_drop_u; /* Rx dropped packets upper */ + u32 rx_pkt_l; /* Rx packets lower */ + u32 rx_pkt_u; /* Rx packets upper */ + u32 rx_undsz_l; /* Rx undersized packet lower */ + u32 rx_undsz_u; /* Rx undersized packet upper */ + u32 rx_64_l; /* Rx 64 oct packet lower */ + u32 rx_64_u; /* Rx 64 oct packet upper */ + u32 rx_127_l; /* Rx 65 to 127 oct packet lower */ + u32 rx_127_u; /* Rx 65 to 127 oct packet upper */ + u32 rx_255_l; /* Rx 128 to 255 oct packet lower */ + u32 rx_255_u; /* Rx 128 to 255 oct packet upper */ + u32 rx_511_l; /* Rx 256 to 511 oct packet lower */ + u32 rx_511_u; /* Rx 256 to 511 oct packet upper */ + u32 rx_1023_l; /* Rx 512 to 1023 oct packet lower */ + u32 rx_1023_u; /* Rx 512 to 1023 oct packet upper */ + u32 rx_1518_l; /* Rx 1024 to 1518 oct packet lower */ + u32 rx_1518_u; /* Rx 1024 to 1518 oct packet upper */ + u32 rx_1519_l; /* Rx 1519 to max oct packet lower */ + u32 rx_1519_u; /* Rx 1519 to max oct packet upper */ + u32 rx_oversz_l; /* Rx oversized packet lower */ + u32 rx_oversz_u; /* Rx oversized packet upper */ + u32 rx_jabber_l; /* Rx Jabber packet lower */ + u32 rx_jabber_u; /* Rx Jabber packet upper */ + u32 rx_frag_l; /* Rx Fragment packet lower */ + u32 rx_frag_u; /* Rx Fragment packet upper */ + u32 rx_cnp_l; /* Rx control packet lower */ + u32 rx_cnp_u; /* Rx control packet upper */ + u32 rx_drntp_l; /* Rx dripped not truncated packet lower */ + u32 rx_drntp_u; /* Rx dripped not truncated packet upper */ + u32 res_1d0[0xc]; + + u32 tx_eoct_l; /* Tx ethernet octests lower */ + u32 tx_eoct_u; /* Tx ethernet octests upper */ + u32 tx_oct_l; /* Tx octests lower */ + u32 tx_oct_u; /* Tx octests upper */ + u32 res_210[0x2]; + u32 tx_pause_frame_l; /* Tx valid pause frame lower */ + u32 tx_pause_frame_u; /* Tx valid pause frame upper */ + u32 tx_frame_l; /* Tx frame counter lower */ + u32 tx_frame_u; /* Tx frame counter upper */ + u32 tx_frame_crc_err_l; /* Tx frame check sequence error lower */ + u32 tx_frame_crc_err_u; /* Tx frame check sequence error upper */ + u32 tx_vlan_l; /* Tx VLAN frame lower */ + u32 tx_vlan_u; /* Tx VLAN frame upper */ + u32 tx_frame_err_l; /* Tx frame error lower */ + u32 tx_frame_err_u; /* Tx frame error upper */ + u32 tx_uni_l; /* Tx unicast frame lower */ + u32 tx_uni_u; /* Tx unicast frame upper */ + u32 tx_multi_l; /* Tx multicast frame lower */ + u32 tx_multi_u; /* Tx multicast frame upper */ + u32 tx_brd_l; /* Tx broadcast frame lower */ + u32 tx_brd_u; /* Tx broadcast frame upper */ + u32 res_258[0x2]; + u32 tx_pkt_l; /* Tx packets lower */ + u32 tx_pkt_u; /* Tx packets upper */ + u32 tx_undsz_l; /* Tx undersized packet lower */ + u32 tx_undsz_u; /* Tx undersized packet upper */ + u32 tx_64_l; /* Tx 64 oct packet lower */ + u32 tx_64_u; /* Tx 64 oct packet upper */ + u32 tx_127_l; /* Tx 65 to 127 oct packet lower */ + u32 tx_127_u; /* Tx 65 to 127 oct packet upper */ + u32 tx_255_l; /* Tx 128 to 255 oct packet lower */ + u32 tx_255_u; /* Tx 128 to 255 oct packet upper */ + u32 tx_511_l; /* Tx 256 to 511 oct packet lower */ + u32 tx_511_u; /* Tx 256 to 511 oct packet upper */ + u32 tx_1023_l; /* Tx 512 to 1023 oct packet lower */ + u32 tx_1023_u; /* Tx 512 to 1023 oct packet upper */ + u32 tx_1518_l; /* Tx 1024 to 1518 oct packet lower */ + u32 tx_1518_u; /* Tx 1024 to 1518 oct packet upper */ + u32 tx_1519_l; /* Tx 1519 to max oct packet lower */ + u32 tx_1519_u; /* Tx 1519 to max oct packet upper */ + u32 res_2a8[0x6]; + u32 tx_cnp_l; /* Tx control packet lower */ + u32 tx_cnp_u; /* Tx control packet upper */ + u32 res_2c8[0xe]; + + /* Line interface control register */ + u32 if_mode; /* interface mode control */ + u32 if_status; /* interface status */ + u32 res_308[0xe]; + + /* HiGig/2 Register */ + u32 hg_config; /* HiGig2 control and configuration */ + u32 res_344[0x3]; + u32 hg_pause_quanta; /* HiGig2 pause quanta */ + u32 res_354[0x3]; + u32 hg_pause_thresh; /* HiGig2 pause quanta threshold */ + u32 res_364[0x3]; + u32 hgrx_pause_status; /* HiGig2 rx pause quanta status */ + u32 hg_fifos_status; /* HiGig2 fifos status */ + u32 rhm; /* Rx HiGig2 message counter register */ + u32 thm;/* Tx HiGig2 message counter register */ + u32 res_380[0x320]; +}; + +/* COMMAND_CONFIG - command and configuration register */ +#define MEMAC_CMD_CFG_RX_EN 0x00000002 /* MAC Rx path enable */ +#define MEMAC_CMD_CFG_TX_EN 0x00000001 /* MAC Tx path enable */ +#define MEMAC_CMD_CFG_RXTX_EN (MEMAC_CMD_CFG_RX_EN | MEMAC_CMD_CFG_TX_EN) + +/* HASHTABLE_CTRL - Hashtable control register */ +#define HASHTABLE_CTRL_MCAST_EN 0x00000200 /* enable mulitcast Rx hash */ +#define HASHTABLE_CTRL_ADDR_MASK 0x000001ff + +/* TX_IPG_LENGTH - Transmit inter-packet gap length register */ +#define TX_IPG_LENGTH_IPG_LEN_MASK 0x000003ff + +/* IMASK - interrupt mask register */ +#define IMASK_MDIO_SCAN_EVENT 0x00010000 /* MDIO scan event mask */ +#define IMASK_MDIO_CMD_CMPL 0x00008000 /* MDIO cmd completion mask */ +#define IMASK_REM_FAULT 0x00004000 /* remote fault mask */ +#define IMASK_LOC_FAULT 0x00002000 /* local fault mask */ +#define IMASK_TX_ECC_ER 0x00001000 /* Tx frame ECC error mask */ +#define IMASK_TX_FIFO_UNFL 0x00000800 /* Tx FIFO underflow mask */ +#define IMASK_TX_ER 0x00000200 /* Tx frame error mask */ +#define IMASK_RX_FIFO_OVFL 0x00000100 /* Rx FIFO overflow mask */ +#define IMASK_RX_ECC_ER 0x00000080 /* Rx frame ECC error mask */ +#define IMASK_RX_JAB_FRM 0x00000040 /* Rx jabber frame mask */ +#define IMASK_RX_OVRSZ_FRM 0x00000020 /* Rx oversized frame mask */ +#define IMASK_RX_RUNT_FRM 0x00000010 /* Rx runt frame mask */ +#define IMASK_RX_FRAG_FRM 0x00000008 /* Rx fragment frame mask */ +#define IMASK_RX_LEN_ER 0x00000004 /* Rx payload length error mask */ +#define IMASK_RX_CRC_ER 0x00000002 /* Rx CRC error mask */ +#define IMASK_RX_ALIGN_ER 0x00000001 /* Rx alignment error mask */ + +#define IMASK_MASK_ALL 0x00000000 + +/* IEVENT - interrupt event register */ +#define IEVENT_MDIO_SCAN_EVENT 0x00010000 /* MDIO scan event */ +#define IEVENT_MDIO_CMD_CMPL 0x00008000 /* MDIO cmd completion */ +#define IEVENT_REM_FAULT 0x00004000 /* remote fault */ +#define IEVENT_LOC_FAULT 0x00002000 /* local fault */ +#define IEVENT_TX_ECC_ER 0x00001000 /* Tx frame ECC error */ +#define IEVENT_TX_FIFO_UNFL 0x00000800 /* Tx FIFO underflow */ +#define IEVENT_TX_ER 0x00000200 /* Tx frame error */ +#define IEVENT_RX_FIFO_OVFL 0x00000100 /* Rx FIFO overflow */ +#define IEVENT_RX_ECC_ER 0x00000080 /* Rx frame ECC error */ +#define IEVENT_RX_JAB_FRM 0x00000040 /* Rx jabber frame */ +#define IEVENT_RX_OVRSZ_FRM 0x00000020 /* Rx oversized frame */ +#define IEVENT_RX_RUNT_FRM 0x00000010 /* Rx runt frame */ +#define IEVENT_RX_FRAG_FRM 0x00000008 /* Rx fragment frame */ +#define IEVENT_RX_LEN_ER 0x00000004 /* Rx payload length error */ +#define IEVENT_RX_CRC_ER 0x00000002 /* Rx CRC error */ +#define IEVENT_RX_ALIGN_ER 0x00000001 /* Rx alignment error */ + +#define IEVENT_CLEAR_ALL 0xffffffff + +/* IF_MODE - Interface Mode Register */ +#define IF_MODE_EN_AUTO 0x00008000 /* 1 - Enable automatic speed selection */ +#define IF_MODE_XGMII 0x00000000 /* 00- XGMII(10) interface mode */ +#define IF_MODE_GMII 0x00000002 /* 10- GMII interface mode */ +#define IF_MODE_MASK 0x00000003 /* mask for mode interface mode */ +#define IF_MODE_RG 0x00000004 /* 1- RGMII */ +#define IF_MODE_RM 0x00000008 /* 1- RGMII */ + +#define IF_DEFAULT (IF_GMII) + +/* Internal PHY Registers - SGMII */ +#define PHY_SGMII_CR_PHY_RESET 0x8000 +#define PHY_SGMII_CR_RESET_AN 0x0200 +#define PHY_SGMII_CR_DEF_VAL 0x1140 +#define PHY_SGMII_DEV_ABILITY_SGMII 0x4001 +#define PHY_SGMII_IF_MODE_AN 0x0002 +#define PHY_SGMII_IF_MODE_SGMII 0x0001 + +struct memac_mdio_controller { + u32 res0[0xc]; + u32 mdio_stat; /* MDIO configuration and status */ + u32 mdio_ctl; /* MDIO control */ + u32 mdio_data; /* MDIO data */ + u32 mdio_addr; /* MDIO address */ +}; + +#define MDIO_STAT_CLKDIV(x) (((x>>1) & 0xff) << 8) +#define MDIO_STAT_BSY (1 << 0) +#define MDIO_STAT_RD_ER (1 << 1) +#define MDIO_STAT_PRE (1 << 5) +#define MDIO_STAT_ENC (1 << 6) +#define MDIO_STAT_HOLD_15_CLK (7 << 2) + +#define MDIO_CTL_DEV_ADDR(x) (x & 0x1f) +#define MDIO_CTL_PORT_ADDR(x) ((x & 0x1f) << 5) +#define MDIO_CTL_PRE_DIS (1 << 10) +#define MDIO_CTL_SCAN_EN (1 << 11) +#define MDIO_CTL_POST_INC (1 << 14) +#define MDIO_CTL_READ (1 << 15) + +#define MDIO_DATA(x) (x & 0xffff) +#define MDIO_DATA_BSY (1 << 31) + +struct fsl_enet_mac; + +void init_memac(struct fsl_enet_mac *mac, void *base, void *phyregs, + int max_rx_len); + +#endif diff --git a/arch/powerpc/include/asm/fsl_portals.h b/arch/powerpc/include/asm/fsl_portals.h index 5644044..b75f5b9 100644 --- a/arch/powerpc/include/asm/fsl_portals.h +++ b/arch/powerpc/include/asm/fsl_portals.h @@ -32,15 +32,16 @@ enum fsl_dpaa_dev { FSL_HW_PORTAL_FMAN2, #endif #endif -#ifdef CONFIG_SYS_DPAA_PME FSL_HW_PORTAL_PME, -#endif #ifdef CONFIG_SYS_FSL_RAID_ENGINE FSL_HW_PORTAL_RAID_ENGINE, #endif #ifdef CONFIG_SYS_DPAA_RMAN FSL_HW_PORTAL_RMAN, #endif +#ifdef CONFIG_SYS_DPAA_DCE + FSL_HW_PORTAL_DCE, +#endif }; diff --git a/arch/powerpc/include/asm/fsl_serdes.h b/arch/powerpc/include/asm/fsl_serdes.h index 22525f1..6cd7379 100644 --- a/arch/powerpc/include/asm/fsl_serdes.h +++ b/arch/powerpc/include/asm/fsl_serdes.h @@ -37,11 +37,17 @@ enum srds_prtcl { SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, SGMII_FM1_DTSEC5, + SGMII_FM1_DTSEC6, + SGMII_FM1_DTSEC9, + SGMII_FM1_DTSEC10, SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4, SGMII_FM2_DTSEC5, + SGMII_FM2_DTSEC6, + SGMII_FM2_DTSEC9, + SGMII_FM2_DTSEC10, SGMII_TSEC1, SGMII_TSEC2, SGMII_TSEC3, @@ -49,13 +55,49 @@ enum srds_prtcl { XAUI_FM1, XAUI_FM2, AURORA, + CPRI1, + CPRI2, + CPRI3, + CPRI4, + CPRI5, + CPRI6, + CPRI7, + CPRI8, + XAUI_FM1_MAC9, + XAUI_FM1_MAC10, + XAUI_FM2_MAC9, + XAUI_FM2_MAC10, + HIGIG_FM1_MAC9, + HIGIG_FM1_MAC10, + HIGIG_FM2_MAC9, + HIGIG_FM2_MAC10, + QSGMII_FM1_A, /* A indicates MACs 1-4 */ + QSGMII_FM1_B, /* B indicates MACs 5,6,9,10 */ + QSGMII_FM2_A, + QSGMII_FM2_B, + XFI_FM1_MAC9, + XFI_FM1_MAC10, + XFI_FM2_MAC9, + XFI_FM2_MAC10, + INTERLAKEN, +}; + +enum srds { + FSL_SRDS_1 = 0, + FSL_SRDS_2 = 1, + FSL_SRDS_3 = 2, + FSL_SRDS_4 = 3, }; int is_serdes_configured(enum srds_prtcl device); void fsl_serdes_init(void); #ifdef CONFIG_FSL_CORENET +#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2 +int serdes_get_first_lane(u32 sd, enum srds_prtcl device); +#else int serdes_get_first_lane(enum srds_prtcl device); +#endif #ifdef CONFIG_SYS_P4080_ERRATUM_SERDES9 void serdes_reset_rx(enum srds_prtcl device); #endif diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h index 7de33a7..969f726 100644 --- a/arch/powerpc/include/asm/immap_85xx.h +++ b/arch/powerpc/include/asm/immap_85xx.h @@ -296,7 +296,9 @@ typedef struct ccsr_pcix { u32 cfg_addr; /* PCIX Configuration Addr */ u32 cfg_data; /* PCIX Configuration Data */ u32 int_ack; /* PCIX IRQ Acknowledge */ - u8 res1[3060]; + u8 res000c[52]; + u32 liodn_base; /* PCIX LIODN base register */ + u8 res0044[3004]; u32 potar0; /* PCIX Outbound Transaction Addr 0 */ u32 potear0; /* PCIX Outbound Translation Extended Addr 0 */ u32 powbar0; /* PCIX Outbound Window Base Addr 0 */ @@ -1687,6 +1689,77 @@ typedef struct ccsr_gur { u32 alt_pmuxcr; /* Alt function signal multiplex control */ u8 res6[12]; u32 devdisr; /* Device disable control */ + u32 devdisr2; /* Device disable control 2 */ + u32 devdisr3; /* Device disable control 3 */ + u32 devdisr4; /* Device disable control 4 */ +#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2 + u32 devdisr5; /* Device disable control 5 */ +#define FSL_CORENET_DEVDISR_PBL 0x80000000 +#define FSL_CORENET_DEVDISR_PMAN 0x40000000 +#define FSL_CORENET_DEVDISR_ESDHC 0x20000000 +#define FSL_CORENET_DEVDISR_DMA1 0x00800000 +#define FSL_CORENET_DEVDISR_DMA2 0x00400000 +#define FSL_CORENET_DEVDISR_USB1 0x00080000 +#define FSL_CORENET_DEVDISR_USB2 0x00040000 +#define FSL_CORENET_DEVDISR_SATA1 0x00008000 +#define FSL_CORENET_DEVDISR_SATA2 0x00004000 +#define FSL_CORENET_DEVDISR_PME 0x00000800 +#define FSL_CORENET_DEVDISR_SEC 0x00000200 +#define FSL_CORENET_DEVDISR_RMU 0x00000080 +#define FSL_CORENET_DEVDISR_DCE 0x00000040 +#define FSL_CORENET_DEVDISR2_DTSEC1_1 0x80000000 +#define FSL_CORENET_DEVDISR2_DTSEC1_2 0x40000000 +#define FSL_CORENET_DEVDISR2_DTSEC1_3 0x20000000 +#define FSL_CORENET_DEVDISR2_DTSEC1_4 0x10000000 +#define FSL_CORENET_DEVDISR2_DTSEC1_5 0x08000000 +#define FSL_CORENET_DEVDISR2_DTSEC1_6 0x04000000 +#define FSL_CORENET_DEVDISR2_DTSEC1_9 0x00800000 +#define FSL_CORENET_DEVDISR2_DTSEC1_10 0x00400000 +#define FSL_CORENET_DEVDISR2_10GEC1_1 0x00800000 +#define FSL_CORENET_DEVDISR2_10GEC1_2 0x00400000 +#define FSL_CORENET_DEVDISR2_DTSEC2_1 0x00080000 +#define FSL_CORENET_DEVDISR2_DTSEC2_2 0x00040000 +#define FSL_CORENET_DEVDISR2_DTSEC2_3 0x00020000 +#define FSL_CORENET_DEVDISR2_DTSEC2_4 0x00010000 +#define FSL_CORENET_DEVDISR2_DTSEC2_5 0x00008000 +#define FSL_CORENET_DEVDISR2_DTSEC2_6 0x00004000 +#define FSL_CORENET_DEVDISR2_DTSEC2_9 0x00000800 +#define FSL_CORENET_DEVDISR2_DTSEC2_10 0x00000400 +#define FSL_CORENET_DEVDISR2_10GEC2_1 0x00000800 +#define FSL_CORENET_DEVDISR2_10GEC2_2 0x00000400 +#define FSL_CORENET_DEVDISR2_FM1 0x00000080 +#define FSL_CORENET_DEVDISR2_FM2 0x00000040 +#define FSL_CORENET_DEVDISR2_CPRI 0x00000008 +#define FSL_CORENET_DEVDISR3_PCIE1 0x80000000 +#define FSL_CORENET_DEVDISR3_PCIE2 0x40000000 +#define FSL_CORENET_DEVDISR3_PCIE3 0x20000000 +#define FSL_CORENET_DEVDISR3_PCIE4 0x10000000 +#define FSL_CORENET_DEVDISR3_SRIO1 0x08000000 +#define FSL_CORENET_DEVDISR3_SRIO2 0x04000000 +#define FSL_CORENET_DEVDISR3_QMAN 0x00080000 +#define FSL_CORENET_DEVDISR3_BMAN 0x00040000 +#define FSL_CORENET_DEVDISR3_LA1 0x00008000 +#define FSL_CORENET_DEVDISR3_MAPLE1 0x00000800 +#define FSL_CORENET_DEVDISR3_MAPLE2 0x00000400 +#define FSL_CORENET_DEVDISR3_MAPLE3 0x00000200 +#define FSL_CORENET_DEVDISR4_I2C1 0x80000000 +#define FSL_CORENET_DEVDISR4_I2C2 0x40000000 +#define FSL_CORENET_DEVDISR4_DUART1 0x20000000 +#define FSL_CORENET_DEVDISR4_DUART2 0x10000000 +#define FSL_CORENET_DEVDISR4_ESPI 0x08000000 +#define FSL_CORENET_DEVDISR5_DDR1 0x80000000 +#define FSL_CORENET_DEVDISR5_DDR2 0x40000000 +#define FSL_CORENET_DEVDISR5_DDR3 0x20000000 +#define FSL_CORENET_DEVDISR5_CPC1 0x08000000 +#define FSL_CORENET_DEVDISR5_CPC2 0x04000000 +#define FSL_CORENET_DEVDISR5_CPC3 0x02000000 +#define FSL_CORENET_DEVDISR5_IFC 0x00800000 +#define FSL_CORENET_DEVDISR5_GPIO 0x00400000 +#define FSL_CORENET_DEVDISR5_DBG 0x00200000 +#define FSL_CORENET_DEVDISR5_NAL 0x00100000 +#define FSL_CORENET_DEVDISR5_TIMERS 0x00020000 +#define FSL_CORENET_NUM_DEVDISR 5 +#else #define FSL_CORENET_DEVDISR_PCIE1 0x80000000 #define FSL_CORENET_DEVDISR_PCIE2 0x40000000 #define FSL_CORENET_DEVDISR_PCIE3 0x20000000 @@ -1712,7 +1785,6 @@ typedef struct ccsr_gur { #define FSL_CORENET_DEVDISR_I2C2 0x00000010 #define FSL_CORENET_DEVDISR_DUART1 0x00000002 #define FSL_CORENET_DEVDISR_DUART2 0x00000001 - u32 devdisr2; /* Device disable control 2 */ #define FSL_CORENET_DEVDISR2_PME 0x80000000 #define FSL_CORENET_DEVDISR2_SEC 0x40000000 #define FSL_CORENET_DEVDISR2_QMBM 0x08000000 @@ -1731,8 +1803,8 @@ typedef struct ccsr_gur { #define FSL_CORENET_DEVDISR2_DTSEC2_4 0x00001000 #define FSL_CORENET_DEVDISR2_DTSEC2_5 0x00000800 #define FSL_CORENET_NUM_DEVDISR 2 - u8 res7[8]; u32 powmgtcsr; /* Power management status & control */ +#endif u8 res8[12]; u32 coredisru; /* uppper portion for support of 64 cores */ u32 coredisrl; /* lower portion for support of 64 cores */ @@ -1755,13 +1827,47 @@ typedef struct ccsr_gur { u32 brrl; /* Boot release */ u8 res17[24]; u32 rcwsr[16]; /* Reset control word status */ + +#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2 +#define FSL_CORENET_RCWSR0_MEM_PLL_RAT_SHIFT 16 +#define FSL_CORENET_RCWSR0_MEM_PLL_RAT_MASK 0x3f +#if defined(CONFIG_PPC_T4240) +#define FSL_CORENET2_RCWSR4_SRDS1_PRTCL 0xfc000000 +#define FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT 26 +#define FSL_CORENET2_RCWSR4_SRDS2_PRTCL 0x00fe0000 +#define FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT 17 +#define FSL_CORENET2_RCWSR4_SRDS3_PRTCL 0x0000f800 +#define FSL_CORENET2_RCWSR4_SRDS3_PRTCL_SHIFT 11 +#define FSL_CORENET2_RCWSR4_SRDS4_PRTCL 0x000000f8 +#define FSL_CORENET2_RCWSR4_SRDS4_PRTCL_SHIFT 3 +#elif defined(CONFIG_PPC_B4860) +#define FSL_CORENET2_RCWSR4_SRDS1_PRTCL 0xfe000000 +#define FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT 25 +#define FSL_CORENET2_RCWSR4_SRDS2_PRTCL 0x00ff0000 +#define FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT 16 +#endif +#define FSL_CORENET2_RCWSR5_SRDS_PLL_PD_S1_PLL1 0x00800000 +#define FSL_CORENET2_RCWSR5_SRDS_PLL_PD_S1_PLL2 0x00400000 +#define FSL_CORENET2_RCWSR5_SRDS_PLL_PD_S2_PLL1 0x00200000 +#define FSL_CORENET2_RCWSR5_SRDS_PLL_PD_S2_PLL2 0x00100000 +#define FSL_CORENET2_RCWSR5_SRDS_PLL_PD_S3_PLL1 0x00080000 +#define FSL_CORENET2_RCWSR5_SRDS_PLL_PD_S3_PLL2 0x00040000 +#define FSL_CORENET2_RCWSR5_SRDS_PLL_PD_S4_PLL1 0x00020000 +#define FSL_CORENET2_RCWSR5_SRDS_PLL_PD_S4_PLL2 0x00010000 + +#else /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */ +#define FSL_CORENET_RCWSR0_MEM_PLL_RAT_SHIFT 17 +#define FSL_CORENET_RCWSR0_MEM_PLL_RAT_MASK 0x1f #define FSL_CORENET_RCWSR4_SRDS_PRTCL 0xfc000000 #define FSL_CORENET_RCWSR5_DDR_SYNC 0x00000080 #define FSL_CORENET_RCWSR5_DDR_SYNC_SHIFT 7 #define FSL_CORENET_RCWSR5_SRDS_EN 0x00002000 +#define FSL_CORENET_RCWSR5_SRDS2_EN 0x00001000 #define FSL_CORENET_RCWSR6_BOOT_LOC 0x0f800000 #define FSL_CORENET_RCWSRn_SRDS_LPD_B2 0x3c000000 /* bits 162..165 */ #define FSL_CORENET_RCWSRn_SRDS_LPD_B3 0x003c0000 /* bits 170..173 */ +#endif /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */ + #define FSL_CORENET_RCWSR7_MCK_TO_PLAT_RAT 0x00400000 #define FSL_CORENET_RCWSR8_HOST_AGT_B1 0x00e00000 #define FSL_CORENET_RCWSR8_HOST_AGT_B2 0x00100000 @@ -1784,6 +1890,24 @@ typedef struct ccsr_gur { #define FSL_CORENET_RCWSR11_EC2_FM1_DTSEC5_MII 0x00100000 #define FSL_CORENET_RCWSR11_EC2_FM1_DTSEC5_NONE 0x00180000 #endif +#if defined(CONFIG_PPC_P5040) +#define FSL_CORENET_RCWSR11_EC1_FM1_DTSEC5_RGMII 0x00000000 +#define FSL_CORENET_RCWSR11_EC1_FM1_DTSEC5_MII 0x00800000 +#define FSL_CORENET_RCWSR11_EC1_FM1_DTSEC5_NONE 0x00c00000 +#define FSL_CORENET_RCWSR11_EC2 0x00180000 /* bits 363..364 */ +#define FSL_CORENET_RCWSR11_EC2_FM2_DTSEC5_RGMII 0x00000000 +#define FSL_CORENET_RCWSR11_EC2_FM2_DTSEC5_MII 0x00100000 +#define FSL_CORENET_RCWSR11_EC2_FM2_DTSEC5_NONE 0x00180000 +#endif +#if defined(CONFIG_PPC_T4240) +#define FSL_CORENET_RCWSR13_EC1 0x60000000 /* bits 417..418 */ +#define FSL_CORENET_RCWSR13_EC1_FM2_DTSEC5_RGMII 0x00000000 +#define FSL_CORENET_RCWSR13_EC1_FM2_GPIO 0x40000000 +#define FSL_CORENET_RCWSR13_EC2 0x18000000 /* bits 419..420 */ +#define FSL_CORENET_RCWSR13_EC2_FM1_DTSEC5_RGMII 0x00000000 +#define FSL_CORENET_RCWSR13_EC2_FM1_DTSEC6_RGMII 0x08000000 +#define FSL_CORENET_RCWSR13_EC2_FM1_GPIO 0x10000000 +#endif u8 res18[192]; u32 scratchrw[4]; /* Scratch Read/Write */ u8 res19[240]; @@ -1880,34 +2004,38 @@ typedef struct ccsr_gur { #define rmuliodnr rio1maintliodnr typedef struct ccsr_clk { - u32 clkc0csr; /* Core 0 Clock control/status */ + u32 clkc0csr; /* 0x000 Core 0 Clock control/status */ u8 res1[0x1c]; - u32 clkc1csr; /* Core 1 Clock control/status */ + u32 clkc1csr; /* 0x020 Core 1 Clock control/status */ u8 res2[0x1c]; - u32 clkc2csr; /* Core 2 Clock control/status */ + u32 clkc2csr; /* 0x040 Core 2 Clock control/status */ u8 res3[0x1c]; - u32 clkc3csr; /* Core 3 Clock control/status */ + u32 clkc3csr; /* 0x060 Core 3 Clock control/status */ u8 res4[0x1c]; - u32 clkc4csr; /* Core 4 Clock control/status */ + u32 clkc4csr; /* 0x080 Core 4 Clock control/status */ u8 res5[0x1c]; - u32 clkc5csr; /* Core 5 Clock control/status */ + u32 clkc5csr; /* 0x0a0 Core 5 Clock control/status */ u8 res6[0x1c]; - u32 clkc6csr; /* Core 6 Clock control/status */ + u32 clkc6csr; /* 0x0c0 Core 6 Clock control/status */ u8 res7[0x1c]; - u32 clkc7csr; /* Core 7 Clock control/status */ + u32 clkc7csr; /* 0x0e0 Core 7 Clock control/status */ u8 res8[0x71c]; - u32 pllc1gsr; /* Cluster PLL 1 General Status */ + u32 pllc1gsr; /* 0x800 Cluster PLL 1 General Status */ u8 res10[0x1c]; - u32 pllc2gsr; /* Cluster PLL 2 General Status */ + u32 pllc2gsr; /* 0x820 Cluster PLL 2 General Status */ u8 res11[0x1c]; - u32 pllc3gsr; /* Cluster PLL 3 General Status */ + u32 pllc3gsr; /* 0x840 Cluster PLL 3 General Status */ u8 res12[0x1c]; - u32 pllc4gsr; /* Cluster PLL 4 General Status */ - u8 res13[0x39c]; - u32 pllpgsr; /* Platform PLL General Status */ + u32 pllc4gsr; /* 0x860 Cluster PLL 4 General Status */ + u8 res13[0x1c]; + u32 pllc5gsr; /* 0x880 Cluster PLL 5 General Status */ u8 res14[0x1c]; - u32 plldgsr; /* DDR PLL General Status */ - u8 res15[0x3dc]; + u32 pllc6gsr; /* 0x8a0 Cluster PLL 6 General Status */ + u8 res15[0x35c]; + u32 pllpgsr; /* 0xc00 Platform PLL General Status */ + u8 res16[0x1c]; + u32 plldgsr; /* 0xc20 DDR PLL General Status */ + u8 res17[0x3dc]; } ccsr_clk_t; #ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2 @@ -2384,6 +2512,78 @@ typedef struct ccsr_gur { #define SDHCDCR_CD_INV 0x80000000 /* invert SDHC card detect */ +#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2 +#define MAX_SERDES 4 +#define SRDS_MAX_LANES 8 +#define SRDS_MAX_BANK 2 +typedef struct serdes_corenet { + struct { + u32 rstctl; /* Reset Control Register */ +#define SRDS_RSTCTL_RST 0x80000000 +#define SRDS_RSTCTL_RSTDONE 0x40000000 +#define SRDS_RSTCTL_RSTERR 0x20000000 +#define SRDS_RSTCTL_SWRST 0x10000000 +#define SRDS_RSTCTL_SDPD 0x00000020 + u32 pllcr0; /* PLL Control Register 0 */ +#define SRDS_PLLCR0_POFF 0x80000000 +#define SRDS_PLLCR0_RFCK_SEL_MASK 0x70000000 +#define SRDS_PLLCR0_RFCK_SEL_100 0x00000000 +#define SRDS_PLLCR0_RFCK_SEL_125 0x10000000 +#define SRDS_PLLCR0_RFCK_SEL_156_25 0x20000000 +#define SRDS_PLLCR0_RFCK_SEL_150 0x30000000 +#define SRDS_PLLCR0_RFCK_SEL_161_13 0x40000000 +#define SRDS_PLLCR0_RFCK_SEL_122_88 0x50000000 +#define SRDS_PLLCR0_FRATE_SEL_MASK 0x000f0000 +#define SRDS_PLLCR0_FRATE_SEL_5 0x00000000 +#define SRDS_PLLCR0_FRATE_SEL_3_75 0x00050000 +#define SRDS_PLLCR0_FRATE_SEL_5_15 0x00060000 +#define SRDS_PLLCR0_FRATE_SEL_4 0x00070000 +#define SRDS_PLLCR0_FRATE_SEL_3_12 0x00090000 +#define SRDS_PLLCR0_FRATE_SEL_3 0x000a0000 + u32 pllcr1; /* PLL Control Register 1 */ +#define SRDS_PLLCR1_PLL_BWSEL 0x08000000 + u32 res_0c; /* 0x00c */ + u32 pllcr3; + u32 pllcr4; + u8 res_18[0x20-0x18]; + } bank[2]; + u8 res_40[0x90-0x40]; + u32 srdstcalcr; /* 0x90 TX Calibration Control */ + u8 res_94[0xa0-0x94]; + u32 srdsrcalcr; /* 0xa0 RX Calibration Control */ + u8 res_a4[0xb0-0xa4]; + u32 srdsgr0; /* 0xb0 General Register 0 */ + u8 res_b4[0xe0-0xb4]; + u32 srdspccr0; /* 0xe0 Protocol Converter Config 0 */ + u32 srdspccr1; /* 0xe4 Protocol Converter Config 1 */ + u32 srdspccr2; /* 0xe8 Protocol Converter Config 2 */ + u32 srdspccr3; /* 0xec Protocol Converter Config 3 */ + u32 srdspccr4; /* 0xf0 Protocol Converter Config 4 */ + u8 res_f4[0x100-0xf4]; + struct { + u32 lnpssr; /* 0x100, 0x120, ..., 0x1e0 */ + u8 res_104[0x120-0x104]; + } srdslnpssr[8]; + u8 res_200[0x800-0x200]; + struct { + u32 gcr0; /* 0x800 General Control Register 0 */ + u32 gcr1; /* 0x804 General Control Register 1 */ + u32 gcr2; /* 0x808 General Control Register 2 */ + u32 res_80c; + u32 recr0; /* 0x810 Receive Equalization Control */ + u32 res_814; + u32 tecr0; /* 0x818 Transmit Equalization Control */ + u32 res_81c; + u32 ttlcr0; /* 0x820 Transition Tracking Loop Ctrl 0 */ + u8 res_824[0x840-0x824]; + } lane[8]; /* Lane A, B, C, D, E, F, G, H */ + u8 res_a00[0x1000-0xa00]; /* from 0xa00 to 0xfff */ +} serdes_corenet_t; + +#else /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */ + +#define SRDS_MAX_LANES 18 +#define SRDS_MAX_BANK 3 typedef struct serdes_corenet { struct { u32 rstctl; /* Reset Control Register */ @@ -2392,11 +2592,13 @@ typedef struct serdes_corenet { #define SRDS_RSTCTL_RSTERR 0x20000000 #define SRDS_RSTCTL_SDPD 0x00000020 u32 pllcr0; /* PLL Control Register 0 */ -#define SRDS_PLLCR0_RFCK_SEL_MASK 0x30000000 +#define SRDS_PLLCR0_RFCK_SEL_MASK 0x70000000 +#define SRDS_PLLCR0_PVCOCNT_EN 0x02000000 #define SRDS_PLLCR0_RFCK_SEL_100 0x00000000 #define SRDS_PLLCR0_RFCK_SEL_125 0x10000000 #define SRDS_PLLCR0_RFCK_SEL_156_25 0x20000000 #define SRDS_PLLCR0_RFCK_SEL_150 0x30000000 +#define SRDS_PLLCR0_RFCK_SEL_161_13 0x40000000 #define SRDS_PLLCR0_FRATE_SEL_MASK 0x00030000 #define SRDS_PLLCR0_FRATE_SEL_5 0x00000000 #define SRDS_PLLCR0_FRATE_SEL_6_25 0x00010000 @@ -2421,6 +2623,7 @@ typedef struct serdes_corenet { u32 gcr0; /* General Control Register 0 */ #define SRDS_GCR0_RRST 0x00400000 #define SRDS_GCR0_1STLANE 0x00010000 +#define SRDS_GCR0_UOTHL 0x00100000 u32 gcr1; /* General Control Register 1 */ #define SRDS_GCR1_REIDL_CTL_MASK 0x001f0000 #define SRDS_GCR1_REIDL_CTL_PCIE 0x00100000 @@ -2440,6 +2643,7 @@ typedef struct serdes_corenet { } lane[24]; u32 res6[384]; } serdes_corenet_t; +#endif /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */ enum { FSL_SRDS_B1_LANE_A = 0, @@ -2482,8 +2686,8 @@ typedef struct ccsr_sec { struct { u32 ms; /* DECO LIODN Register, MS */ u32 ls; /* DECO LIODN Register, LS */ - } decoliodnr[5]; - u8 res4[0x58]; + } decoliodnr[8]; + u8 res4[0x40]; u32 dar; /* DECO Avail Register */ u32 drr; /* DECO Reset Register */ u8 res5[0xe78]; @@ -2523,13 +2727,16 @@ typedef struct ccsr_sec { #endif typedef struct ccsr_qman { +#ifdef CONFIG_SYS_FSL_QMAN_V3 + u8 res0[0x200]; +#else struct { u32 qcsp_lio_cfg; /* 0x0 - SW Portal n LIO cfg */ u32 qcsp_io_cfg; /* 0x4 - SW Portal n IO cfg */ u32 res; u32 qcsp_dd_cfg; /* 0xc - SW Portal n Dynamic Debug cfg */ } qcsp[32]; - +#endif /* Not actually reserved, but irrelevant to u-boot */ u8 res[0xbf8 - 0x200]; u32 ip_rev_1; @@ -2554,6 +2761,14 @@ typedef struct ccsr_qman { u32 ci_rlm_cfg; /* Initiator Read Latency Monitor Cfg */ u32 ci_rlm_avg; /* Initiator Read Latency Monitor Avg */ u8 res7[0x2e8]; +#ifdef CONFIG_SYS_FSL_QMAN_V3 + struct { + u32 qcsp_lio_cfg; /* 0x0 - SW Portal n LIO cfg */ + u32 qcsp_io_cfg; /* 0x4 - SW Portal n IO cfg */ + u32 res; + u32 qcsp_dd_cfg; /* 0xc - SW Portal n Dynamic Debug cfg*/ + } qcsp[50]; +#endif } ccsr_qman_t; typedef struct ccsr_bman { @@ -2617,14 +2832,48 @@ struct ccsr_rman { }; #endif +#ifdef CONFIG_SYS_PMAN +struct ccsr_pman { + u8 res_00[0x40]; + u32 poes1; /* PMAN Operation Error Status Register 1 */ + u32 poes2; /* PMAN Operation Error Status Register 2 */ + u32 poeah; /* PMAN Operation Error Address High */ + u32 poeal; /* PMAN Operation Error Address Low */ + u8 res_50[0x50]; + u32 pr1; /* PMAN Revision Register 1 */ + u32 pr2; /* PMAN Revision Register 2 */ + u8 res_a8[0x8]; + u32 pcap; /* PMAN Capabilities Register */ + u8 res_b4[0xc]; + u32 pc1; /* PMAN Control Register 1 */ + u32 pc2; /* PMAN Control Register 2 */ + u32 pc3; /* PMAN Control Register 3 */ + u32 pc4; /* PMAN Control Register 4 */ + u32 pc5; /* PMAN Control Register 5 */ + u32 pc6; /* PMAN Control Register 6 */ + u8 res_d8[0x8]; + u32 ppa1; /* PMAN Prefetch Attributes Register 1 */ + u32 ppa2; /* PMAN Prefetch Attributes Register 2 */ + u8 res_e8[0x8]; + u32 pics; /* PMAN Interrupt Control and Status */ + u8 res_f4[0xf0c]; +}; +#endif + #ifdef CONFIG_FSL_CORENET #define CONFIG_SYS_FSL_CORENET_CCM_OFFSET 0x0000 +#ifdef CONFIG_SYS_PMAN +#define CONFIG_SYS_FSL_CORENET_PMAN1_OFFSET 0x4000 +#define CONFIG_SYS_FSL_CORENET_PMAN2_OFFSET 0x5000 +#define CONFIG_SYS_FSL_CORENET_PMAN3_OFFSET 0x6000 +#endif #define CONFIG_SYS_MPC85xx_DDR_OFFSET 0x8000 #define CONFIG_SYS_MPC85xx_DDR2_OFFSET 0x9000 #define CONFIG_SYS_MPC85xx_DDR3_OFFSET 0xA000 #define CONFIG_SYS_FSL_CORENET_CLK_OFFSET 0xE1000 #define CONFIG_SYS_FSL_CORENET_RCPM_OFFSET 0xE2000 #define CONFIG_SYS_FSL_CORENET_SERDES_OFFSET 0xEA000 +#define CONFIG_SYS_FSL_CORENET_SERDES2_OFFSET 0xEB000 #define CONFIG_SYS_FSL_CPC_OFFSET 0x10000 #define CONFIG_SYS_MPC85xx_DMA1_OFFSET 0x100000 #define CONFIG_SYS_MPC85xx_DMA2_OFFSET 0x101000 @@ -2635,10 +2884,17 @@ struct ccsr_rman { #define CONFIG_SYS_MPC85xx_IFC_OFFSET 0x124000 #define CONFIG_SYS_MPC85xx_GPIO_OFFSET 0x130000 #define CONFIG_SYS_FSL_CORENET_RMAN_OFFSET 0x1e0000 +#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2 +#define CONFIG_SYS_MPC85xx_PCIE1_OFFSET 0x240000 +#define CONFIG_SYS_MPC85xx_PCIE2_OFFSET 0x250000 +#define CONFIG_SYS_MPC85xx_PCIE3_OFFSET 0x260000 +#define CONFIG_SYS_MPC85xx_PCIE4_OFFSET 0x270000 +#else #define CONFIG_SYS_MPC85xx_PCIE1_OFFSET 0x200000 #define CONFIG_SYS_MPC85xx_PCIE2_OFFSET 0x201000 #define CONFIG_SYS_MPC85xx_PCIE3_OFFSET 0x202000 #define CONFIG_SYS_MPC85xx_PCIE4_OFFSET 0x203000 +#endif #define CONFIG_SYS_MPC85xx_USB1_OFFSET 0x210000 #define CONFIG_SYS_MPC85xx_USB2_OFFSET 0x211000 #define CONFIG_SYS_MPC85xx_USB_OFFSET CONFIG_SYS_MPC85xx_USB1_OFFSET @@ -2657,7 +2913,9 @@ struct ccsr_rman { #define CONFIG_SYS_FSL_FM1_RX2_1G_OFFSET 0x48a000 #define CONFIG_SYS_FSL_FM1_RX3_1G_OFFSET 0x48b000 #define CONFIG_SYS_FSL_FM1_RX4_1G_OFFSET 0x48c000 +#define CONFIG_SYS_FSL_FM1_RX5_1G_OFFSET 0x48d000 #define CONFIG_SYS_FSL_FM1_RX0_10G_OFFSET 0x490000 +#define CONFIG_SYS_FSL_FM1_RX1_10G_OFFSET 0x491000 #define CONFIG_SYS_FSL_FM1_DTSEC1_OFFSET 0x4e0000 #define CONFIG_SYS_FSL_FM2_OFFSET 0x500000 #define CONFIG_SYS_FSL_FM2_RX0_1G_OFFSET 0x588000 @@ -2665,7 +2923,10 @@ struct ccsr_rman { #define CONFIG_SYS_FSL_FM2_RX2_1G_OFFSET 0x58a000 #define CONFIG_SYS_FSL_FM2_RX3_1G_OFFSET 0x58b000 #define CONFIG_SYS_FSL_FM2_RX4_1G_OFFSET 0x58c000 +#define CONFIG_SYS_FSL_FM2_RX5_1G_OFFSET 0x58d000 #define CONFIG_SYS_FSL_FM2_RX0_10G_OFFSET 0x590000 +#define CONFIG_SYS_FSL_FM2_RX1_10G_OFFSET 0x591000 +#define CONFIG_SYS_FSL_CLUSTER_1_L2_OFFSET 0xC20000 #else #define CONFIG_SYS_MPC85xx_ECM_OFFSET 0x0000 #define CONFIG_SYS_MPC85xx_DDR_OFFSET 0x2000 @@ -2775,6 +3036,8 @@ struct ccsr_rman { (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_SERDES2_OFFSET) #define CONFIG_SYS_FSL_CORENET_SERDES_ADDR \ (CONFIG_SYS_IMMR + CONFIG_SYS_FSL_CORENET_SERDES_OFFSET) +#define CONFIG_SYS_FSL_CORENET_SERDES2_ADDR \ + (CONFIG_SYS_IMMR + CONFIG_SYS_FSL_CORENET_SERDES2_OFFSET) #define CONFIG_SYS_MPC85xx_USB_ADDR \ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_USB_OFFSET) #define CONFIG_SYS_MPC85xx_USB1_PHY_ADDR \ @@ -2808,4 +3071,62 @@ struct ccsr_rman { #define TSEC_BASE_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_TSEC1_OFFSET) #define MDIO_BASE_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MDIO1_OFFSET) +#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2 +struct ccsr_cluster_l2 { + u32 l2csr0; /* 0x000 L2 cache control and status register 0 */ + u32 l2csr1; /* 0x004 L2 cache control and status register 1 */ + u32 l2cfg0; /* 0x008 L2 cache configuration register 0 */ + u8 res_0c[500];/* 0x00c - 0x1ff */ + u32 l2pir0; /* 0x200 L2 cache partitioning ID register 0 */ + u8 res_204[4]; + u32 l2par0; /* 0x208 L2 cache partitioning allocation register 0 */ + u32 l2pwr0; /* 0x20c L2 cache partitioning way register 0 */ + u32 l2pir1; /* 0x210 L2 cache partitioning ID register 1 */ + u8 res_214[4]; + u32 l2par1; /* 0x218 L2 cache partitioning allocation register 1 */ + u32 l2pwr1; /* 0x21c L2 cache partitioning way register 1 */ + u32 u2pir2; /* 0x220 L2 cache partitioning ID register 2 */ + u8 res_224[4]; + u32 l2par2; /* 0x228 L2 cache partitioning allocation register 2 */ + u32 l2pwr2; /* 0x22c L2 cache partitioning way register 2 */ + u32 l2pir3; /* 0x230 L2 cache partitioning ID register 3 */ + u8 res_234[4]; + u32 l2par3; /* 0x238 L2 cache partitining allocation register 3 */ + u32 l2pwr3; /* 0x23c L2 cache partitining way register 3 */ + u32 l2pir4; /* 0x240 L2 cache partitioning ID register 3 */ + u8 res244[4]; + u32 l2par4; /* 0x248 L2 cache partitioning allocation register 3 */ + u32 l2pwr4; /* 0x24c L2 cache partitioning way register 3 */ + u32 l2pir5; /* 0x250 L2 cache partitioning ID register 3 */ + u8 res_254[4]; + u32 l2par5; /* 0x258 L2 cache partitioning allocation register 3 */ + u32 l2pwr5; /* 0x25c L2 cache partitioning way register 3 */ + u32 l2pir6; /* 0x260 L2 cache partitioning ID register 3 */ + u8 res_264[4]; + u32 l2par6; /* 0x268 L2 cache partitioning allocation register 3 */ + u32 l2pwr6; /* 0x26c L2 cache partitioning way register 3 */ + u32 l2pir7; /* 0x270 L2 cache partitioning ID register 3 */ + u8 res274[4]; + u32 l2par7; /* 0x278 L2 cache partitioning allocation register 3 */ + u32 l2pwr7; /* 0x27c L2 cache partitioning way register 3 */ + u8 res_280[0xb80]; /* 0x280 - 0xdff */ + u32 l2errinjhi; /* 0xe00 L2 cache error injection mask high */ + u32 l2errinjlo; /* 0xe04 L2 cache error injection mask low */ + u32 l2errinjctl;/* 0xe08 L2 cache error injection control */ + u8 res_e0c[20]; /* 0xe0c - 0x01f */ + u32 l2captdatahi; /* 0xe20 L2 cache error capture data high */ + u32 l2captdatalo; /* 0xe24 L2 cache error capture data low */ + u32 l2captecc; /* 0xe28 L2 cache error capture ECC syndrome */ + u8 res_e2c[20]; /* 0xe2c - 0xe3f */ + u32 l2errdet; /* 0xe40 L2 cache error detect */ + u32 l2errdis; /* 0xe44 L2 cache error disable */ + u32 l2errinten; /* 0xe48 L2 cache error interrupt enable */ + u32 l2errattr; /* 0xe4c L2 cache error attribute */ + u32 l2erreaddr; /* 0xe50 L2 cache error extended address */ + u32 l2erraddr; /* 0xe54 L2 cache error address */ + u32 l2errctl; /* 0xe58 L2 cache error control */ +}; +#define CONFIG_SYS_FSL_CLUSTER_1_L2 \ + (CONFIG_SYS_IMMR + CONFIG_SYS_FSL_CLUSTER_1_L2_OFFSET) +#endif /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */ #endif /*__IMMAP_85xx__*/ diff --git a/arch/powerpc/include/asm/mp.h b/arch/powerpc/include/asm/mp.h index fe490ba..9188ede 100644 --- a/arch/powerpc/include/asm/mp.h +++ b/arch/powerpc/include/asm/mp.h @@ -25,7 +25,7 @@ void setup_mp(void); void cpu_mp_lmb_reserve(struct lmb *lmb); -u32 determine_mp_bootpg(void); +u32 determine_mp_bootpg(unsigned int *pagesize); int is_core_disabled(int nr); #ifdef CONFIG_E6500 diff --git a/arch/powerpc/include/asm/mpc85xx_gpio.h b/arch/powerpc/include/asm/mpc85xx_gpio.h index 5a608a5..2aed514 100644 --- a/arch/powerpc/include/asm/mpc85xx_gpio.h +++ b/arch/powerpc/include/asm/mpc85xx_gpio.h @@ -98,7 +98,10 @@ static inline int gpio_direction_input(unsigned gpio) static inline int gpio_direction_output(unsigned gpio, int value) { - mpc85xx_gpio_set_low(1U << gpio); + if (value) + mpc85xx_gpio_set_high(1U << gpio); + else + mpc85xx_gpio_set_low(1U << gpio); return 0; } diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h index 36695e2..7aa3231 100644 --- a/arch/powerpc/include/asm/processor.h +++ b/arch/powerpc/include/asm/processor.h @@ -1095,6 +1095,17 @@ #define SVR_P4080 0x820000 #define SVR_P5010 0x822100 #define SVR_P5020 0x822000 +#define SVR_P5021 0X820500 +#define SVR_P5040 0x820400 +#define SVR_T4240 0x824000 +#define SVR_T4120 0x824001 +#define SVR_B4860 0X868000 +#define SVR_G4860 0x868001 +#define SVR_G4060 0x868003 +#define SVR_B4440 0x868100 +#define SVR_G4440 0x868101 +#define SVR_B4420 0x868102 +#define SVR_B4220 0x868103 #define SVR_8610 0x80A000 #define SVR_8641 0x809000 diff --git a/arch/powerpc/lib/board.c b/arch/powerpc/lib/board.c index b860141..ebf4008 100644 --- a/arch/powerpc/lib/board.c +++ b/arch/powerpc/lib/board.c @@ -440,8 +440,8 @@ void board_init_f(ulong bootflag) * We need to make sure the location we intend to put secondary core * boot code is reserved and not used by any part of u-boot */ - if (addr > determine_mp_bootpg()) { - addr = determine_mp_bootpg(); + if (addr > determine_mp_bootpg(NULL)) { + addr = determine_mp_bootpg(NULL); debug("Reserving MP boot page to %08lx\n", addr); } #endif diff --git a/board/freescale/common/Makefile b/board/freescale/common/Makefile index 54cb098..36f7c4f 100644 --- a/board/freescale/common/Makefile +++ b/board/freescale/common/Makefile @@ -53,6 +53,7 @@ COBJS-$(CONFIG_P2020DS) += ics307_clk.o COBJS-$(CONFIG_P3041DS) += ics307_clk.o COBJS-$(CONFIG_P4080DS) += ics307_clk.o COBJS-$(CONFIG_P5020DS) += ics307_clk.o +COBJS-$(CONFIG_VSC_CROSSBAR) += vsc3316_3308.o # deal with common files for P-series corenet based devices SUBLIB-$(CONFIG_P2041RDB) += p_corenet/libp_corenet.o diff --git a/board/freescale/common/qixis.c b/board/freescale/common/qixis.c index 6cd7e51..c92902a 100644 --- a/board/freescale/common/qixis.c +++ b/board/freescale/common/qixis.c @@ -32,22 +32,22 @@ void qixis_write(unsigned int reg, u8 value) void qixis_reset(void) { - QIXIS_WRITE(rst_ctl, 0x83); + QIXIS_WRITE(rst_ctl, QIXIS_RST_CTL_RESET); } void qixis_bank_reset(void) { - QIXIS_WRITE(rcfg_ctl, 0x20); - QIXIS_WRITE(rcfg_ctl, 0x21); + QIXIS_WRITE(rcfg_ctl, QIXIS_RCFG_CTL_RECONFIG_IDLE); + QIXIS_WRITE(rcfg_ctl, QIXIS_RCFG_CTL_RECONFIG_START); } -/* Set the boot bank to the power-on default bank0 */ +/* Set the boot bank to the power-on default bank */ void clear_altbank(void) { u8 reg; reg = QIXIS_READ(brdcfg[0]); - reg = reg & ~QIXIS_LBMAP_MASK; + reg = (reg & ~QIXIS_LBMAP_MASK) | QIXIS_LBMAP_DFLTBANK; QIXIS_WRITE(brdcfg[0], reg); } @@ -85,11 +85,11 @@ static void qixis_dump_regs(void) printf("ctl_sys = %02x\n", QIXIS_READ(ctl_sys)); printf("rcw_ctl = %02x\n", QIXIS_READ(rcw_ctl)); printf("present = %02x\n", QIXIS_READ(present)); + printf("present2 = %02x\n", QIXIS_READ(present2)); printf("clk_spd = %02x\n", QIXIS_READ(clk_spd)); printf("stat_dut = %02x\n", QIXIS_READ(stat_dut)); printf("stat_sys = %02x\n", QIXIS_READ(stat_sys)); printf("stat_alrm = %02x\n", QIXIS_READ(stat_alrm)); - printf("ctl_sys2 = %02x\n", QIXIS_READ(ctl_sys2)); } #endif @@ -115,7 +115,8 @@ int qixis_reset_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) for (i = 0; i < ARRAY_SIZE(period); i++) { if (strcmp(argv[2], period[i]) == 0) { /* disable watchdog */ - QIXIS_WRITE(rcfg_ctl, rcfg & ~0x08); + QIXIS_WRITE(rcfg_ctl, + rcfg & ~QIXIS_RCFG_CTL_WATCHDOG_ENBLE); QIXIS_WRITE(watch, ((i<<2) - 1)); QIXIS_WRITE(rcfg_ctl, rcfg); return 0; diff --git a/board/freescale/common/qixis.h b/board/freescale/common/qixis.h index 7a0268a..b98b180 100644 --- a/board/freescale/common/qixis.h +++ b/board/freescale/common/qixis.h @@ -26,7 +26,7 @@ struct qixis { u8 stat_sys; u8 stat_alrm; u8 present; - u8 ctl_sys2; + u8 present2; /* Presence Status Register 2,0x0c */ u8 rcw_ctl; u8 ctl_led; u8 i2cblk; @@ -86,12 +86,6 @@ struct qixis { u8 res15[16]; }; -#define QIXIS_BASE 0xffdf0000 -#define QIXIS_LBMAP_SWITCH 7 -#define QIXIS_LBMAP_MASK 0x0f -#define QIXIS_LBMAP_SHIFT 0 -#define QIXIS_LBMAP_ALTBANK 0x04 - u8 qixis_read(unsigned int reg); void qixis_write(unsigned int reg, u8 value); diff --git a/board/freescale/common/vsc3316_3308.c b/board/freescale/common/vsc3316_3308.c new file mode 100644 index 0000000..7868565 --- /dev/null +++ b/board/freescale/common/vsc3316_3308.c @@ -0,0 +1,184 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include "vsc3316_3308.h" + +#define REVISION_ID_REG 0x7E +#define INTERFACE_MODE_REG 0x79 +#define CURRENT_PAGE_REGISTER 0x7F +#define CONNECTION_CONFIG_PAGE 0x00 +#define INPUT_STATE_REG 0x13 +#define GLOBAL_INPUT_ISE1 0x51 +#define GLOBAL_INPUT_ISE2 0x52 +#define GLOBAL_INPUT_LOS 0x55 +#define GLOBAL_CORE_CNTRL 0x5D +#define OUTPUT_MODE_PAGE 0x23 +#define CORE_CONTROL_PAGE 0x25 +#define CORE_CONFIG_REG 0x75 + +int vsc_if_enable(unsigned int vsc_addr) +{ + u8 data; + + debug("VSC:Configuring VSC at I2C address 0x%2x" + " for 2-wire interface\n", vsc_addr); + + /* enable 2-wire Serial InterFace (I2C) */ + data = 0x02; + return i2c_write(vsc_addr, INTERFACE_MODE_REG, 1, &data, 1); +} + +int vsc3316_config(unsigned int vsc_addr, const int8_t con_arr[][2], + unsigned int num_con) +{ + unsigned int i; + u8 rev_id = 0; + int ret; + + debug("VSC:Initializing VSC3316 at I2C address 0x%2x" + " for Tx\n", vsc_addr); + + ret = i2c_read(vsc_addr, REVISION_ID_REG, 1, &rev_id, 1); + if (ret < 0) { + printf("VSC:0x%x could not read REV_ID from device.\n", + vsc_addr); + return ret; + } + + if (rev_id != 0xab) { + printf("VSC: device at address 0x%x is not VSC3316/3308.\n", + vsc_addr); + return -ENODEV; + } + + ret = vsc_if_enable(vsc_addr); + if (ret) { + printf("VSC:0x%x could not configured for 2-wire I/F.\n", + vsc_addr); + return ret; + } + + /* config connections - page 0x00 */ + i2c_reg_write(vsc_addr, CURRENT_PAGE_REGISTER, CONNECTION_CONFIG_PAGE); + + /* Making crosspoint connections, by connecting required + * input to output */ + for (i = 0; i < num_con ; i++) + i2c_reg_write(vsc_addr, con_arr[i][1], con_arr[i][0]); + + /* input state - page 0x13 */ + i2c_reg_write(vsc_addr, CURRENT_PAGE_REGISTER, INPUT_STATE_REG); + /* Configuring the required input of the switch */ + for (i = 0; i < num_con ; i++) + i2c_reg_write(vsc_addr, con_arr[i][0], 0x80); + + /* Setting Global Input LOS threshold value */ + i2c_reg_write(vsc_addr, GLOBAL_INPUT_LOS, 0x60); + + /* config output mode - page 0x23 */ + i2c_reg_write(vsc_addr, CURRENT_PAGE_REGISTER, OUTPUT_MODE_PAGE); + /* Turn ON the Output driver correspond to required output*/ + for (i = 0; i < num_con ; i++) + i2c_reg_write(vsc_addr, con_arr[i][1], 0); + + /* configure global core control register, Turn on Global core power */ + i2c_reg_write(vsc_addr, GLOBAL_CORE_CNTRL, 0); + + vsc_wp_config(vsc_addr); + + return 0; +} + +int vsc3308_config(unsigned int vsc_addr, const int8_t con_arr[][2], + unsigned int num_con) +{ + unsigned int i; + u8 rev_id = 0; + int ret; + + debug("VSC:Initializing VSC3308 at I2C address 0x%x" + " for Tx\n", vsc_addr); + + ret = i2c_read(vsc_addr, REVISION_ID_REG, 1, &rev_id, 1); + if (ret < 0) { + printf("VSC:0x%x could not read REV_ID from device.\n", + vsc_addr); + return ret; + } + + if (rev_id != 0xab) { + printf("VSC: device at address 0x%x is not VSC3316/3308.\n", + vsc_addr); + return -ENODEV; + } + + ret = vsc_if_enable(vsc_addr); + if (ret) { + printf("VSC:0x%x could not configured for 2-wire I/F.\n", + vsc_addr); + return ret; + } + + /* config connections - page 0x00 */ + i2c_reg_write(vsc_addr, CURRENT_PAGE_REGISTER, CONNECTION_CONFIG_PAGE); + + /* Making crosspoint connections, by connecting required + * input to output */ + for (i = 0; i < num_con ; i++) + i2c_reg_write(vsc_addr, con_arr[i][1], con_arr[i][0]); + + /*Configure Global Input ISE and gain */ + i2c_reg_write(vsc_addr, GLOBAL_INPUT_ISE1, 0x12); + i2c_reg_write(vsc_addr, GLOBAL_INPUT_ISE2, 0x12); + + /* input state - page 0x13 */ + i2c_reg_write(vsc_addr, CURRENT_PAGE_REGISTER, INPUT_STATE_REG); + /* Turning ON the required input of the switch */ + for (i = 0; i < num_con ; i++) + i2c_reg_write(vsc_addr, con_arr[i][0], 0); + + /* Setting Global Input LOS threshold value */ + i2c_reg_write(vsc_addr, GLOBAL_INPUT_LOS, 0x60); + + /* config output mode - page 0x23 */ + i2c_reg_write(vsc_addr, CURRENT_PAGE_REGISTER, OUTPUT_MODE_PAGE); + /* Turn ON the Output driver correspond to required output*/ + for (i = 0; i < num_con ; i++) + i2c_reg_write(vsc_addr, con_arr[i][1], 0); + + /* configure global core control register, Turn on Global core power */ + i2c_reg_write(vsc_addr, GLOBAL_CORE_CNTRL, 0); + + vsc_wp_config(vsc_addr); + + return 0; +} + +void vsc_wp_config(unsigned int vsc_addr) +{ + debug("VSC:Configuring VSC at address:0x%x for WP\n", vsc_addr); + + /* For new crosspoint configuration to occur, WP bit of + * CORE_CONFIG_REG should be set 1 and then reset to 0 */ + i2c_reg_write(vsc_addr, CORE_CONFIG_REG, 0x01); + i2c_reg_write(vsc_addr, CORE_CONFIG_REG, 0x0); +} diff --git a/board/freescale/common/vsc3316_3308.h b/board/freescale/common/vsc3316_3308.h new file mode 100644 index 0000000..effd66d --- /dev/null +++ b/board/freescale/common/vsc3316_3308.h @@ -0,0 +1,34 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __VSC_CROSSBAR_H_ +#define __VSC_CROSSBAR_H 1_ + +#include <common.h> +#include <i2c.h> +#include <errno.h> + +int vsc_if_enable(unsigned int vsc_addr); +int vsc3316_config(unsigned int vsc_addr, const int8_t con_arr[][2], + unsigned int num_con); +int vsc3308_config(unsigned int vsc_addr, const int8_t con_arr[][2], + unsigned int num_con); +void vsc_wp_config(unsigned int vsc_addr); + +#endif /* __VSC_CROSSBAR_H_ */ diff --git a/board/freescale/t4qds/Makefile b/board/freescale/t4qds/Makefile new file mode 100644 index 0000000..ff09ffa --- /dev/null +++ b/board/freescale/t4qds/Makefile @@ -0,0 +1,54 @@ +# +# Copyright 2012 Freescale Semiconductor, Inc. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).o + +COBJS-y += $(BOARD).o +COBJS-y += ddr.o +COBJS-$(CONFIG_T4240QDS)+= eth.o +COBJS-$(CONFIG_PCI) += pci.o +COBJS-y += law.o +COBJS-y += tlb.o + +SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS-y)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(call cmd_link_o_target, $(OBJS)) + +clean: + rm -f $(OBJS) $(SOBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/freescale/t4qds/ddr.c b/board/freescale/t4qds/ddr.c new file mode 100644 index 0000000..692616a --- /dev/null +++ b/board/freescale/t4qds/ddr.c @@ -0,0 +1,186 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * Version 2 or later as published by the Free Software Foundation. + */ + +#include <common.h> +#include <i2c.h> +#include <hwconfig.h> +#include <asm/mmu.h> +#include <asm/fsl_ddr_sdram.h> +#include <asm/fsl_ddr_dimm_params.h> +#include <asm/fsl_law.h> + +DECLARE_GLOBAL_DATA_PTR; + +struct board_specific_parameters { + u32 n_ranks; + u32 datarate_mhz_high; + u32 clk_adjust; + u32 wrlvl_start; + u32 wrlvl_ctl_2; + u32 wrlvl_ctl_3; + u32 cpo; + u32 write_data_delay; + u32 force_2T; +}; + +/* + * This table contains all valid speeds we want to override with board + * specific parameters. datarate_mhz_high values need to be in ascending order + * for each n_ranks group. + */ +static const struct board_specific_parameters udimm0[] = { + /* + * memory controller 0 + * num| hi| clk| wrlvl | wrlvl | wrlvl | cpo |wrdata|2T + * ranks| mhz|adjst| start | ctl2 | ctl3 | |delay | + */ + {2, 1350, 5, 7, 0x0809090b, 0x0c0c0d09, 0xff, 2, 0}, + {2, 1666, 5, 8, 0x080a0a0c, 0x0c0d0e0a, 0xff, 2, 0}, + {2, 2140, 5, 8, 0x090a0b0c, 0x0e0f100b, 0xff, 2, 0}, + {1, 1350, 5, 8, 0x0809090b, 0x0c0c0d0a, 0xff, 2, 0}, + {1, 1700, 5, 8, 0x080a0a0c, 0x0c0d0e0a, 0xff, 2, 0}, + {1, 1900, 4, 8, 0x080a0a0c, 0x0e0e0f0a, 0xff, 2, 0}, + {1, 2140, 4, 8, 0x090a0b0c, 0x0e0f100b, 0xff, 2, 0}, + {} +}; + +/* + * The three slots have slightly different timing. The center values are good + * for all slots. We use identical speed tables for them. In future use, if + * DIMMs require separated tables, make more entries as needed. + */ +static const struct board_specific_parameters *udimms[] = { + udimm0, +}; + +static const struct board_specific_parameters rdimm0[] = { + /* + * memory controller 0 + * num| hi| clk| wrlvl | wrlvl | wrlvl | cpo |wrdata|2T + * ranks| mhz|adjst| start | ctl2 | ctl3 | |delay | + */ + {4, 1350, 5, 9, 0x08070605, 0x07080805, 0xff, 2, 0}, + {4, 1666, 5, 8, 0x08070605, 0x07080805, 0xff, 2, 0}, + {4, 2140, 5, 8, 0x08070605, 0x07081805, 0xff, 2, 0}, + {2, 1350, 5, 7, 0x0809090b, 0x0c0c0d09, 0xff, 2, 0}, + {2, 1666, 5, 8, 0x080a0a0c, 0x0c0d0e0a, 0xff, 2, 0}, + {2, 2140, 5, 8, 0x090a0b0c, 0x0e0f100b, 0xff, 2, 0}, + {1, 1350, 5, 8, 0x0809090b, 0x0c0c0d0a, 0xff, 2, 0}, + {1, 1700, 5, 8, 0x080a0a0c, 0x0c0d0e0a, 0xff, 2, 0}, + {1, 1900, 4, 8, 0x080a0a0c, 0x0e0e0f0a, 0xff, 2, 0}, + {1, 2140, 4, 8, 0x090a0b0c, 0x0e0f100b, 0xff, 2, 0}, + {} +}; + +/* + * The three slots have slightly different timing. See comments above. + */ +static const struct board_specific_parameters *rdimms[] = { + rdimm0, +}; + +void fsl_ddr_board_options(memctl_options_t *popts, + dimm_params_t *pdimm, + unsigned int ctrl_num) +{ + const struct board_specific_parameters *pbsp, *pbsp_highest = NULL; + ulong ddr_freq; + + if (ctrl_num > 2) { + printf("Not supported controller number %d\n", ctrl_num); + return; + } + if (!pdimm->n_ranks) + return; + + /* + * we use identical timing for all slots. If needed, change the code + * to pbsp = rdimms[ctrl_num] or pbsp = udimms[ctrl_num]; + */ + if (popts->registered_dimm_en) + pbsp = rdimms[0]; + else + pbsp = udimms[0]; + + + /* Get clk_adjust, cpo, write_data_delay,2T, according to the board ddr + * freqency and n_banks specified in board_specific_parameters table. + */ + ddr_freq = get_ddr_freq(0) / 1000000; + while (pbsp->datarate_mhz_high) { + if (pbsp->n_ranks == pdimm->n_ranks) { + if (ddr_freq <= pbsp->datarate_mhz_high) { + popts->cpo_override = pbsp->cpo; + popts->write_data_delay = + pbsp->write_data_delay; + popts->clk_adjust = pbsp->clk_adjust; + popts->wrlvl_start = pbsp->wrlvl_start; + popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2; + popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3; + popts->twoT_en = pbsp->force_2T; + goto found; + } + pbsp_highest = pbsp; + } + pbsp++; + } + + if (pbsp_highest) { + printf("Error: board specific timing not found " + "for data rate %lu MT/s\n" + "Trying to use the highest speed (%u) parameters\n", + ddr_freq, pbsp_highest->datarate_mhz_high); + popts->cpo_override = pbsp_highest->cpo; + popts->write_data_delay = pbsp_highest->write_data_delay; + popts->clk_adjust = pbsp_highest->clk_adjust; + popts->wrlvl_start = pbsp_highest->wrlvl_start; + popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2; + popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3; + popts->twoT_en = pbsp_highest->force_2T; + } else { + panic("DIMM is not supported by this board"); + } +found: + /* + * Factors to consider for half-strength driver enable: + * - number of DIMMs installed + */ + popts->half_strength_driver_enable = 0; + /* + * Write leveling override + */ + popts->wrlvl_override = 1; + popts->wrlvl_sample = 0xf; + + /* + * Rtt and Rtt_WR override + */ + popts->rtt_override = 0; + + /* Enable ZQ calibration */ + popts->zq_en = 1; + + /* DHC_EN =1, ODT = 75 Ohm */ + popts->ddr_cdr1 = DDR_CDR1_DHC_EN | DDR_CDR1_ODT(DDR_CDR_ODT_75ohm); + popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_75ohm); +} + +phys_size_t initdram(int board_type) +{ + phys_size_t dram_size; + + puts("Initializing....using SPD\n"); + + dram_size = fsl_ddr_sdram(); + + dram_size = setup_ddr_tlbs(dram_size / 0x100000); + dram_size *= 0x100000; + + puts(" DDR: "); + return dram_size; +} diff --git a/board/freescale/t4qds/eth.c b/board/freescale/t4qds/eth.c new file mode 100644 index 0000000..a49c7d4 --- /dev/null +++ b/board/freescale/t4qds/eth.c @@ -0,0 +1,495 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <command.h> +#include <netdev.h> +#include <asm/mmu.h> +#include <asm/processor.h> +#include <asm/cache.h> +#include <asm/immap_85xx.h> +#include <asm/fsl_law.h> +#include <asm/fsl_ddr_sdram.h> +#include <asm/fsl_serdes.h> +#include <asm/fsl_portals.h> +#include <asm/fsl_liodn.h> +#include <malloc.h> +#include <fm_eth.h> +#include <fsl_mdio.h> +#include <miiphy.h> +#include <phy.h> +#include <asm/fsl_dtsec.h> +#include <asm/fsl_serdes.h> +#include "../common/qixis.h" +#include "../common/fman.h" + +#include "t4240qds_qixis.h" + +#define EMI_NONE 0xFFFFFFFF +#define EMI1_RGMII 0 +#define EMI1_SLOT1 1 +#define EMI1_SLOT2 2 +#define EMI1_SLOT3 3 +#define EMI1_SLOT4 4 +#define EMI1_SLOT5 5 +#define EMI1_SLOT7 7 +#define EMI2 8 /* tmp, FIXME */ +/* Slot6 and Slot8 do not have EMI connections */ + +static int mdio_mux[NUM_FM_PORTS]; + +static const char *mdio_names[] = { + "T4240QDS_MDIO0", + "T4240QDS_MDIO1", + "T4240QDS_MDIO2", + "T4240QDS_MDIO3", + "T4240QDS_MDIO4", + "T4240QDS_MDIO5", + "NULL", + "T4240QDS_MDIO7", + "T4240QDS_10GC", +}; + +static u8 lane_to_slot_fsm1[] = {1, 1, 1, 1, 2, 2, 2, 2}; +static u8 lane_to_slot_fsm2[] = {3, 3, 3, 3, 4, 4, 4, 4}; + +static const char *t4240qds_mdio_name_for_muxval(u8 muxval) +{ + return mdio_names[muxval]; +} + +struct mii_dev *mii_dev_for_muxval(u8 muxval) +{ + struct mii_dev *bus; + const char *name = t4240qds_mdio_name_for_muxval(muxval); + + if (!name) { + printf("No bus for muxval %x\n", muxval); + return NULL; + } + + bus = miiphy_get_dev_by_name(name); + + if (!bus) { + printf("No bus by name %s\n", name); + return NULL; + } + + return bus; +} + +struct t4240qds_mdio { + u8 muxval; + struct mii_dev *realbus; +}; + +static void t4240qds_mux_mdio(u8 muxval) +{ + u8 brdcfg4; + if ((muxval < 6) || (muxval == 7)) { + brdcfg4 = QIXIS_READ(brdcfg[4]); + brdcfg4 &= ~BRDCFG4_EMISEL_MASK; + brdcfg4 |= (muxval << BRDCFG4_EMISEL_SHIFT); + QIXIS_WRITE(brdcfg[4], brdcfg4); + } +} + +static int t4240qds_mdio_read(struct mii_dev *bus, int addr, int devad, + int regnum) +{ + struct t4240qds_mdio *priv = bus->priv; + + t4240qds_mux_mdio(priv->muxval); + + return priv->realbus->read(priv->realbus, addr, devad, regnum); +} + +static int t4240qds_mdio_write(struct mii_dev *bus, int addr, int devad, + int regnum, u16 value) +{ + struct t4240qds_mdio *priv = bus->priv; + + t4240qds_mux_mdio(priv->muxval); + + return priv->realbus->write(priv->realbus, addr, devad, regnum, value); +} + +static int t4240qds_mdio_reset(struct mii_dev *bus) +{ + struct t4240qds_mdio *priv = bus->priv; + + return priv->realbus->reset(priv->realbus); +} + +static int t4240qds_mdio_init(char *realbusname, u8 muxval) +{ + struct t4240qds_mdio *pmdio; + struct mii_dev *bus = mdio_alloc(); + + if (!bus) { + printf("Failed to allocate T4240QDS MDIO bus\n"); + return -1; + } + + pmdio = malloc(sizeof(*pmdio)); + if (!pmdio) { + printf("Failed to allocate T4240QDS private data\n"); + free(bus); + return -1; + } + + bus->read = t4240qds_mdio_read; + bus->write = t4240qds_mdio_write; + bus->reset = t4240qds_mdio_reset; + sprintf(bus->name, t4240qds_mdio_name_for_muxval(muxval)); + + pmdio->realbus = miiphy_get_dev_by_name(realbusname); + + if (!pmdio->realbus) { + printf("No bus with name %s\n", realbusname); + free(bus); + free(pmdio); + return -1; + } + + pmdio->muxval = muxval; + bus->priv = pmdio; + + return mdio_register(bus); +} + +void board_ft_fman_fixup_port(void *blob, char * prop, phys_addr_t pa, + enum fm_port port, int offset) +{ + if (mdio_mux[port] == EMI1_RGMII) + fdt_set_phy_handle(blob, prop, pa, "phy_rgmii"); + + /* TODO: will do with dts */ +} + +void fdt_fixup_board_enet(void *fdt) +{ + /* TODO: will do with dts */ +} + +int board_eth_init(bd_t *bis) +{ +#if defined(CONFIG_FMAN_ENET) + int i; + struct memac_mdio_info dtsec_mdio_info; + struct memac_mdio_info tgec_mdio_info; + ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + u32 srds_prtcl_s1, srds_prtcl_s2; + + srds_prtcl_s1 = in_be32(&gur->rcwsr[4]) & + FSL_CORENET2_RCWSR4_SRDS1_PRTCL; + srds_prtcl_s1 >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT; + srds_prtcl_s2 = in_be32(&gur->rcwsr[4]) & + FSL_CORENET2_RCWSR4_SRDS2_PRTCL; + srds_prtcl_s2 >>= FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT; + + /* Initialize the mdio_mux array so we can recognize empty elements */ + for (i = 0; i < NUM_FM_PORTS; i++) + mdio_mux[i] = EMI_NONE; + + dtsec_mdio_info.regs = + (struct memac_mdio_controller *)CONFIG_SYS_FM2_DTSEC_MDIO_ADDR; + + dtsec_mdio_info.name = DEFAULT_FM_MDIO_NAME; + + /* Register the 1G MDIO bus */ + fm_memac_mdio_init(bis, &dtsec_mdio_info); + + tgec_mdio_info.regs = + (struct memac_mdio_controller *)CONFIG_SYS_FM2_TGEC_MDIO_ADDR; + tgec_mdio_info.name = DEFAULT_FM_TGEC_MDIO_NAME; + + /* Register the 10G MDIO bus */ + fm_memac_mdio_init(bis, &tgec_mdio_info); + + /* Register the muxing front-ends to the MDIO buses */ + t4240qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_RGMII); + t4240qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT1); + t4240qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT2); + t4240qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT3); + t4240qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT4); + t4240qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT5); + t4240qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT7); + t4240qds_mdio_init(DEFAULT_FM_TGEC_MDIO_NAME, EMI2); + + + switch (srds_prtcl_s1) { + case 1: + case 2: + case 4: + /* XAUI/HiGig in Slot1 and Slot2 */ + fm_info_set_phy_address(FM1_10GEC1, FM1_10GEC1_PHY_ADDR); + fm_info_set_phy_address(FM1_10GEC2, FM1_10GEC2_PHY_ADDR); + break; + case 28: + case 36: + /* SGMII in Slot1 and Slot2 */ + fm_info_set_phy_address(FM1_DTSEC1, SGMII_CARD_PORT1_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC2, SGMII_CARD_PORT2_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC3, SGMII_CARD_PORT3_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC4, SGMII_CARD_PORT4_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC5, SGMII_CARD_PORT1_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC6, SGMII_CARD_PORT2_PHY_ADDR); + if ((srds_prtcl_s2 != 56) && (srds_prtcl_s2 != 57)) { + fm_info_set_phy_address(FM1_DTSEC9, + SGMII_CARD_PORT4_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC10, + SGMII_CARD_PORT3_PHY_ADDR); + } + break; + case 38: + fm_info_set_phy_address(FM1_DTSEC5, QSGMII_CARD_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC6, QSGMII_CARD_PHY_ADDR); + if ((srds_prtcl_s2 != 56) && (srds_prtcl_s2 != 57)) { + fm_info_set_phy_address(FM1_DTSEC9, + QSGMII_CARD_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC10, + QSGMII_CARD_PHY_ADDR); + } + break; + case 40: + case 46: + case 48: + fm_info_set_phy_address(FM1_DTSEC5, SGMII_CARD_PORT1_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC6, SGMII_CARD_PORT2_PHY_ADDR); + if ((srds_prtcl_s2 != 56) && (srds_prtcl_s2 != 57)) { + fm_info_set_phy_address(FM1_DTSEC10, + SGMII_CARD_PORT3_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC9, + SGMII_CARD_PORT4_PHY_ADDR); + } + fm_info_set_phy_address(FM1_DTSEC1, QSGMII_CARD_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC2, QSGMII_CARD_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC3, QSGMII_CARD_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC4, QSGMII_CARD_PHY_ADDR); + break; + default: + puts("Invalid SerDes1 protocol for T4240QDS\n"); + break; + } + + for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) { + int idx = i - FM1_DTSEC1, lane, slot; + switch (fm_info_get_enet_if(i)) { + case PHY_INTERFACE_MODE_SGMII: + lane = serdes_get_first_lane(FSL_SRDS_1, + SGMII_FM1_DTSEC1 + idx); + if (lane < 0) + break; + slot = lane_to_slot_fsm1[lane]; + debug("FM1@DTSEC%u expects SGMII in slot %u\n", + idx + 1, slot); + if (QIXIS_READ(present2) & (1 << (slot - 1))) + fm_disable_port(i); + switch (slot) { + case 1: + mdio_mux[i] = EMI1_SLOT1; + fm_info_set_mdio(i, + mii_dev_for_muxval(mdio_mux[i])); + break; + case 2: + mdio_mux[i] = EMI1_SLOT2; + fm_info_set_mdio(i, + mii_dev_for_muxval(mdio_mux[i])); + break; + }; + break; + case PHY_INTERFACE_MODE_RGMII: + /* FM1 DTSEC5 routes to RGMII with EC2 */ + debug("FM1@DTSEC%u is RGMII at address %u\n", + idx + 1, 2); + if (i == FM1_DTSEC5) + fm_info_set_phy_address(i, 2); + mdio_mux[i] = EMI1_RGMII; + fm_info_set_mdio(i, + mii_dev_for_muxval(mdio_mux[i])); + break; + default: + break; + } + } + + for (i = FM1_10GEC1; i < FM1_10GEC1 + CONFIG_SYS_NUM_FM1_10GEC; i++) { + switch (fm_info_get_enet_if(i)) { + case PHY_INTERFACE_MODE_XGMII: + mdio_mux[i] = EMI2; + fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i])); + break; + default: + break; + } + } + + +#if (CONFIG_SYS_NUM_FMAN == 2) + switch (srds_prtcl_s2) { + case 1: + case 2: + case 4: + /* XAUI/HiGig in Slot3 and Slot4 */ + fm_info_set_phy_address(FM2_10GEC1, FM2_10GEC1_PHY_ADDR); + fm_info_set_phy_address(FM2_10GEC2, FM2_10GEC2_PHY_ADDR); + break; + case 7: + case 13: + case 14: + case 16: + case 22: + case 23: + case 25: + case 26: + /* XAUI/HiGig in Slot3, SGMII in Slot4 */ + fm_info_set_phy_address(FM2_10GEC1, FM2_10GEC1_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC1, SGMII_CARD_PORT1_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC2, SGMII_CARD_PORT2_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC3, SGMII_CARD_PORT3_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC4, SGMII_CARD_PORT4_PHY_ADDR); + break; + case 28: + case 36: + /* SGMII in Slot3 and Slot4 */ + fm_info_set_phy_address(FM2_DTSEC1, SGMII_CARD_PORT1_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC2, SGMII_CARD_PORT2_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC3, SGMII_CARD_PORT3_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC4, SGMII_CARD_PORT4_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC5, SGMII_CARD_PORT1_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC6, SGMII_CARD_PORT2_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC9, SGMII_CARD_PORT4_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC10, SGMII_CARD_PORT3_PHY_ADDR); + break; + case 38: + /* QSGMII in Slot3 and Slot4 */ + fm_info_set_phy_address(FM2_DTSEC1, QSGMII_CARD_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC2, QSGMII_CARD_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC3, QSGMII_CARD_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC4, QSGMII_CARD_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC5, QSGMII_CARD_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC6, QSGMII_CARD_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC9, QSGMII_CARD_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC10, QSGMII_CARD_PHY_ADDR); + break; + case 40: + case 46: + case 48: + /* SGMII in Slot3 */ + fm_info_set_phy_address(FM2_DTSEC5, SGMII_CARD_PORT1_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC6, SGMII_CARD_PORT2_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC9, SGMII_CARD_PORT4_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC10, SGMII_CARD_PORT3_PHY_ADDR); + /* QSGMII in Slot4 */ + fm_info_set_phy_address(FM2_DTSEC1, QSGMII_CARD_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC2, QSGMII_CARD_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC3, QSGMII_CARD_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC4, QSGMII_CARD_PHY_ADDR); + break; + case 50: + case 52: + case 54: + fm_info_set_phy_address(FM2_10GEC1, FM2_10GEC1_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC1, QSGMII_CARD_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC2, QSGMII_CARD_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC3, QSGMII_CARD_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC4, QSGMII_CARD_PHY_ADDR); + break; + case 56: + case 57: + /* XFI in Slot3, SGMII in Slot4 */ + fm_info_set_phy_address(FM1_10GEC1, XFI_CARD_PORT1_PHY_ADDR); + fm_info_set_phy_address(FM1_10GEC2, XFI_CARD_PORT2_PHY_ADDR); + fm_info_set_phy_address(FM2_10GEC2, XFI_CARD_PORT3_PHY_ADDR); + fm_info_set_phy_address(FM2_10GEC1, XFI_CARD_PORT4_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC1, SGMII_CARD_PORT1_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC2, SGMII_CARD_PORT2_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC3, SGMII_CARD_PORT3_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC4, SGMII_CARD_PORT4_PHY_ADDR); + break; + default: + puts("Invalid SerDes2 protocol for T4240QDS\n"); + break; + } + + for (i = FM2_DTSEC1; i < FM2_DTSEC1 + CONFIG_SYS_NUM_FM2_DTSEC; i++) { + int idx = i - FM2_DTSEC1, lane, slot; + switch (fm_info_get_enet_if(i)) { + case PHY_INTERFACE_MODE_SGMII: + lane = serdes_get_first_lane(FSL_SRDS_2, + SGMII_FM2_DTSEC1 + idx); + if (lane < 0) + break; + slot = lane_to_slot_fsm2[lane]; + debug("FM2@DTSEC%u expects SGMII in slot %u\n", + idx + 1, slot); + if (QIXIS_READ(present2) & (1 << (slot - 1))) + fm_disable_port(i); + switch (slot) { + case 3: + mdio_mux[i] = EMI1_SLOT3; + fm_info_set_mdio(i, + mii_dev_for_muxval(mdio_mux[i])); + break; + case 4: + mdio_mux[i] = EMI1_SLOT4; + fm_info_set_mdio(i, + mii_dev_for_muxval(mdio_mux[i])); + break; + }; + break; + case PHY_INTERFACE_MODE_RGMII: + /* + * If DTSEC5 is RGMII, then it's routed via via EC1 to + * the first on-board RGMII port. If DTSEC6 is RGMII, + * then it's routed via via EC2 to the second on-board + * RGMII port. + */ + debug("FM2@DTSEC%u is RGMII at address %u\n", + idx + 1, i == FM2_DTSEC5 ? 1 : 2); + fm_info_set_phy_address(i, i == FM2_DTSEC5 ? 1 : 2); + mdio_mux[i] = EMI1_RGMII; + fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i])); + break; + default: + break; + } + } + + for (i = FM2_10GEC1; i < FM2_10GEC1 + CONFIG_SYS_NUM_FM2_10GEC; i++) { + switch (fm_info_get_enet_if(i)) { + case PHY_INTERFACE_MODE_XGMII: + mdio_mux[i] = EMI2; + fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i])); + break; + default: + break; + } + } +#endif /* CONFIG_SYS_NUM_FMAN */ + + cpu_eth_init(bis); +#endif /* CONFIG_FMAN_ENET */ + + return pci_eth_init(bis); +} diff --git a/board/freescale/t4qds/law.c b/board/freescale/t4qds/law.c new file mode 100644 index 0000000..5debcf6 --- /dev/null +++ b/board/freescale/t4qds/law.c @@ -0,0 +1,47 @@ +/* + * Copyright 2008-2012 Freescale Semiconductor, Inc. + * + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/fsl_law.h> +#include <asm/mmu.h> + +struct law_entry law_table[] = { + SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_IFC), +#ifdef CONFIG_SYS_BMAN_MEM_PHYS + SET_LAW(CONFIG_SYS_BMAN_MEM_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_BMAN), +#endif +#ifdef CONFIG_SYS_QMAN_MEM_PHYS + SET_LAW(CONFIG_SYS_QMAN_MEM_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_QMAN), +#endif + SET_LAW(QIXIS_BASE_PHYS, LAW_SIZE_4K, LAW_TRGT_IF_IFC), +#ifdef CONFIG_SYS_DCSRBAR_PHYS + SET_LAW(CONFIG_SYS_DCSRBAR_PHYS, LAW_SIZE_4M, LAW_TRGT_IF_DCSR), +#endif +#ifdef CONFIG_SYS_NAND_BASE_PHYS + SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_IFC), +#endif +}; + +int num_law_entries = ARRAY_SIZE(law_table); diff --git a/board/freescale/t4qds/pci.c b/board/freescale/t4qds/pci.c new file mode 100644 index 0000000..fc00b4a --- /dev/null +++ b/board/freescale/t4qds/pci.c @@ -0,0 +1,39 @@ +/* + * Copyright 2007-2012 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <command.h> +#include <pci.h> +#include <asm/fsl_pci.h> +#include <libfdt.h> +#include <fdt_support.h> +#include <asm/fsl_serdes.h> + +void pci_init_board(void) +{ + fsl_pcie_init_board(0); +} + +void pci_of_setup(void *blob, bd_t *bd) +{ + FT_FSL_PCI_SETUP; +} diff --git a/board/freescale/t4qds/t4240qds_qixis.h b/board/freescale/t4qds/t4240qds_qixis.h new file mode 100644 index 0000000..efb718d --- /dev/null +++ b/board/freescale/t4qds/t4240qds_qixis.h @@ -0,0 +1,56 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __T4020QDS_QIXIS_H__ +#define __T4020QDS_QIXIS_H__ + +/* Definitions of QIXIS Registers for T4020QDS */ + +/* BRDCFG4[4:7]] select EC1 and EC2 as a pair */ +#define BRDCFG4_EMISEL_MASK 0xE0 +#define BRDCFG4_EMISEL_SHIFT 5 + +/* SYSCLK */ +#define QIXIS_SYSCLK_66 0x0 +#define QIXIS_SYSCLK_83 0x1 +#define QIXIS_SYSCLK_100 0x2 +#define QIXIS_SYSCLK_125 0x3 +#define QIXIS_SYSCLK_133 0x4 +#define QIXIS_SYSCLK_150 0x5 +#define QIXIS_SYSCLK_160 0x6 +#define QIXIS_SYSCLK_166 0x7 + +/* DDRCLK */ +#define QIXIS_DDRCLK_66 0x0 +#define QIXIS_DDRCLK_100 0x1 +#define QIXIS_DDRCLK_125 0x2 +#define QIXIS_DDRCLK_133 0x3 + +#define BRDCFG5_RESET 0x00 + +#define BRDCFG12_SD3EN_MASK 0x20 +#define BRDCFG12_SD3MX_MASK 0x08 +#define BRDCFG12_SD3MX_SLOT5 0x08 +#define BRDCFG12_SD3MX_SLOT6 0x00 +#define BRDCFG12_SD4EN_MASK 0x04 +#define BRDCFG12_SD4MX_MASK 0x03 +#define BRDCFG12_SD4MX_SLOT7 0x02 +#define BRDCFG12_SD4MX_SLOT8 0x01 +#define BRDCFG12_SD4MX_AURO_SATA 0x00 +#endif diff --git a/board/freescale/t4qds/t4qds.c b/board/freescale/t4qds/t4qds.c new file mode 100644 index 0000000..88b8ced --- /dev/null +++ b/board/freescale/t4qds/t4qds.c @@ -0,0 +1,395 @@ +/* + * Copyright 2009-2012 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <command.h> +#include <i2c.h> +#include <netdev.h> +#include <linux/compiler.h> +#include <asm/mmu.h> +#include <asm/processor.h> +#include <asm/cache.h> +#include <asm/immap_85xx.h> +#include <asm/fsl_law.h> +#include <asm/fsl_serdes.h> +#include <asm/fsl_portals.h> +#include <asm/fsl_liodn.h> +#include <fm_eth.h> + +#include "../common/qixis.h" +#include "../common/vsc3316_3308.h" +#include "t4qds.h" +#include "t4240qds_qixis.h" + +DECLARE_GLOBAL_DATA_PTR; + +int checkboard(void) +{ + u8 sw; + struct cpu_type *cpu = gd->cpu; + ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; + unsigned int i; + + printf("Board: %sQDS, ", cpu->name); + printf("Sys ID: 0x%02x, Sys Ver: 0x%02x, FPGA Ver: 0x%02x, ", + QIXIS_READ(id), QIXIS_READ(arch), QIXIS_READ(scver)); + + sw = QIXIS_READ(brdcfg[0]); + sw = (sw & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT; + + if (sw < 0x8) + printf("vBank: %d\n", sw); + else if (sw == 0x8) + puts("Promjet\n"); + else if (sw == 0x9) + puts("NAND\n"); + else + printf("invalid setting of SW%u\n", QIXIS_LBMAP_SWITCH); + + /* Display the RCW, so that no one gets confused as to what RCW + * we're actually using for this boot. + */ + puts("Reset Configuration Word (RCW):"); + for (i = 0; i < ARRAY_SIZE(gur->rcwsr); i++) { + u32 rcw = in_be32(&gur->rcwsr[i]); + + if ((i % 4) == 0) + printf("\n %08x:", i * 4); + printf(" %08x", rcw); + } + puts("\n"); + + /* + * Display the actual SERDES reference clocks as configured by the + * dip switches on the board. Note that the SWx registers could + * technically be set to force the reference clocks to match the + * values that the SERDES expects (or vice versa). For now, however, + * we just display both values and hope the user notices when they + * don't match. + */ + puts("SERDES Reference Clocks: "); + sw = QIXIS_READ(brdcfg[2]); + for (i = 0; i < MAX_SERDES; i++) { + static const char *freq[] = { + "100", "125", "156.25", "161.1328125"}; + unsigned int clock = (sw >> (2 * i)) & 3; + + printf("SERDES%u=%sMHz ", i+1, freq[clock]); + } + puts("\n"); + + return 0; +} + +int select_i2c_ch_pca9547(u8 ch) +{ + int ret; + + ret = i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, &ch, 1); + if (ret) { + puts("PCA: failed to select proper channel\n"); + return ret; + } + + return 0; +} + +/* Configure Crossbar switches for Front-Side SerDes Ports */ +int config_frontside_crossbar_vsc3316(void) +{ + ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + u32 srds_prtcl_s1, srds_prtcl_s2; + int ret; + + ret = select_i2c_ch_pca9547(I2C_MUX_CH_VSC3316_FS); + if (ret) + return ret; + + srds_prtcl_s1 = in_be32(&gur->rcwsr[4]) & + FSL_CORENET2_RCWSR4_SRDS1_PRTCL; + srds_prtcl_s1 >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT; + if (srds_prtcl_s1) { + ret = vsc3316_config(VSC3316_FSM_TX_ADDR, vsc3316_fsm1_tx, 8); + if (ret) + return ret; + ret = vsc3316_config(VSC3316_FSM_RX_ADDR, vsc3316_fsm1_rx, 8); + if (ret) + return ret; + } + + srds_prtcl_s2 = in_be32(&gur->rcwsr[4]) & + FSL_CORENET2_RCWSR4_SRDS2_PRTCL; + srds_prtcl_s2 >>= FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT; + if (srds_prtcl_s2) { + ret = vsc3316_config(VSC3316_FSM_TX_ADDR, vsc3316_fsm2_tx, 8); + if (ret) + return ret; + ret = vsc3316_config(VSC3316_FSM_RX_ADDR, vsc3316_fsm2_rx, 8); + if (ret) + return ret; + } + + return 0; +} + +int config_backside_crossbar_mux(void) +{ + ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + u32 srds_prtcl_s3, srds_prtcl_s4; + u8 brdcfg; + + srds_prtcl_s3 = in_be32(&gur->rcwsr[4]) & + FSL_CORENET2_RCWSR4_SRDS3_PRTCL; + srds_prtcl_s3 >>= FSL_CORENET2_RCWSR4_SRDS3_PRTCL_SHIFT; + switch (srds_prtcl_s3) { + case 0: + /* SerDes3 is not enabled */ + break; + case 2: + case 9: + case 10: + /* SD3(0:7) => SLOT5(0:7) */ + brdcfg = QIXIS_READ(brdcfg[12]); + brdcfg &= ~BRDCFG12_SD3MX_MASK; + brdcfg |= BRDCFG12_SD3MX_SLOT5; + QIXIS_WRITE(brdcfg[12], brdcfg); + break; + case 4: + case 6: + case 8: + case 12: + case 14: + case 16: + case 17: + case 19: + case 20: + /* SD3(4:7) => SLOT6(0:3) */ + brdcfg = QIXIS_READ(brdcfg[12]); + brdcfg &= ~BRDCFG12_SD3MX_MASK; + brdcfg |= BRDCFG12_SD3MX_SLOT6; + QIXIS_WRITE(brdcfg[12], brdcfg); + break; + default: + printf("WARNING: unsupported for SerDes3 Protocol %d\n", + srds_prtcl_s3); + return -1; + } + + srds_prtcl_s4 = in_be32(&gur->rcwsr[4]) & + FSL_CORENET2_RCWSR4_SRDS4_PRTCL; + srds_prtcl_s4 >>= FSL_CORENET2_RCWSR4_SRDS4_PRTCL_SHIFT; + switch (srds_prtcl_s4) { + case 0: + /* SerDes4 is not enabled */ + break; + case 2: + /* 10b, SD4(0:7) => SLOT7(0:7) */ + brdcfg = QIXIS_READ(brdcfg[12]); + brdcfg &= ~BRDCFG12_SD4MX_MASK; + brdcfg |= BRDCFG12_SD4MX_SLOT7; + QIXIS_WRITE(brdcfg[12], brdcfg); + break; + case 4: + case 6: + case 8: + /* x1b, SD4(4:7) => SLOT8(0:3) */ + brdcfg = QIXIS_READ(brdcfg[12]); + brdcfg &= ~BRDCFG12_SD4MX_MASK; + brdcfg |= BRDCFG12_SD4MX_SLOT8; + QIXIS_WRITE(brdcfg[12], brdcfg); + break; + case 10: + case 12: + case 14: + case 16: + case 18: + /* 00b, SD4(4:5) => AURORA, SD4(6:7) => SATA */ + brdcfg = QIXIS_READ(brdcfg[12]); + brdcfg &= ~BRDCFG12_SD4MX_MASK; + brdcfg |= BRDCFG12_SD4MX_AURO_SATA; + QIXIS_WRITE(brdcfg[12], brdcfg); + break; + default: + printf("WARNING: unsupported for SerDes4 Protocol %d\n", + srds_prtcl_s4); + return -1; + } + + return 0; +} + +int board_early_init_r(void) +{ + const unsigned int flashbase = CONFIG_SYS_FLASH_BASE; + const u8 flash_esel = find_tlb_idx((void *)flashbase, 1); + + /* + * Remap Boot flash + PROMJET region to caching-inhibited + * so that flash can be erased properly. + */ + + /* Flush d-cache and invalidate i-cache of any FLASH data */ + flush_dcache(); + invalidate_icache(); + + /* invalidate existing TLB entry for flash + promjet */ + disable_tlb(flash_esel); + + set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, flash_esel, BOOKE_PAGESZ_256M, 1); + + set_liodns(); +#ifdef CONFIG_SYS_DPAA_QBMAN + setup_portals(); +#endif + + /* Disable remote I2C connectoin */ + QIXIS_WRITE(brdcfg[5], BRDCFG5_RESET); + + /* Configure board SERDES ports crossbar */ + config_frontside_crossbar_vsc3316(); + config_backside_crossbar_mux(); + select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT); + + return 0; +} + +unsigned long get_board_sys_clk(void) +{ + u8 sysclk_conf = QIXIS_READ(brdcfg[1]); + + switch (sysclk_conf & 0x0F) { + case QIXIS_SYSCLK_83: + return 83333333; + case QIXIS_SYSCLK_100: + return 100000000; + case QIXIS_SYSCLK_125: + return 125000000; + case QIXIS_SYSCLK_133: + return 133333333; + case QIXIS_SYSCLK_150: + return 150000000; + case QIXIS_SYSCLK_160: + return 160000000; + case QIXIS_SYSCLK_166: + return 166666666; + } + return 66666666; +} + +unsigned long get_board_ddr_clk(void) +{ + u8 ddrclk_conf = QIXIS_READ(brdcfg[1]); + + switch ((ddrclk_conf & 0x30) >> 4) { + case QIXIS_DDRCLK_100: + return 100000000; + case QIXIS_DDRCLK_125: + return 125000000; + case QIXIS_DDRCLK_133: + return 133333333; + } + return 66666666; +} + +static const char *serdes_clock_to_string(u32 clock) +{ + switch (clock) { + case SRDS_PLLCR0_RFCK_SEL_100: + return "100"; + case SRDS_PLLCR0_RFCK_SEL_125: + return "125"; + case SRDS_PLLCR0_RFCK_SEL_156_25: + return "156.25"; + case SRDS_PLLCR0_RFCK_SEL_161_13: + return "161.1328125"; + default: + return "???"; + } +} + +int misc_init_r(void) +{ + u8 sw; + serdes_corenet_t *srds_regs = + (void *)CONFIG_SYS_FSL_CORENET_SERDES_ADDR; + u32 actual[MAX_SERDES]; + unsigned int i; + + sw = QIXIS_READ(brdcfg[2]); + for (i = 0; i < MAX_SERDES; i++) { + unsigned int clock = (sw >> (2 * i)) & 3; + switch (clock) { + case 0: + actual[i] = SRDS_PLLCR0_RFCK_SEL_100; + break; + case 1: + actual[i] = SRDS_PLLCR0_RFCK_SEL_125; + break; + case 2: + actual[i] = SRDS_PLLCR0_RFCK_SEL_156_25; + break; + case 3: + actual[i] = SRDS_PLLCR0_RFCK_SEL_161_13; + break; + } + } + + for (i = 0; i < MAX_SERDES; i++) { + u32 pllcr0 = srds_regs->bank[i].pllcr0; + u32 expected = pllcr0 & SRDS_PLLCR0_RFCK_SEL_MASK; + if (expected != actual[i]) { + printf("Warning: SERDES%u expects reference clock" + " %sMHz, but actual is %sMHz\n", i + 1, + serdes_clock_to_string(expected), + serdes_clock_to_string(actual[i])); + } + } + + return 0; +} + +void ft_board_setup(void *blob, bd_t *bd) +{ + phys_addr_t base; + phys_size_t size; + + ft_cpu_setup(blob, bd); + + base = getenv_bootm_low(); + size = getenv_bootm_size(); + + fdt_fixup_memory(blob, (u64)base, (u64)size); + +#ifdef CONFIG_PCI + pci_of_setup(blob, bd); +#endif + + fdt_fixup_liodn(blob); + fdt_fixup_dr_usb(blob, bd); + +#ifdef CONFIG_SYS_DPAA_FMAN + fdt_fixup_fman_ethernet(blob); + fdt_fixup_board_enet(blob); +#endif +} diff --git a/board/freescale/t4qds/t4qds.h b/board/freescale/t4qds/t4qds.h new file mode 100644 index 0000000..c6a3492 --- /dev/null +++ b/board/freescale/t4qds/t4qds.h @@ -0,0 +1,37 @@ +/* + * Copyright 2011-2012 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CORENET_DS_H__ +#define __CORENET_DS_H__ + +void fdt_fixup_board_enet(void *blob); +void pci_of_setup(void *blob, bd_t *bd); + +static const int8_t vsc3316_fsm1_tx[8][2] = { {0, 0}, {1, 1}, {6, 6}, {7, 7}, + {8, 8}, {9, 9}, {14, 14}, {15, 15} }; + +static const int8_t vsc3316_fsm2_tx[8][2] = { {2, 2}, {3, 3}, {4, 4}, {5, 5}, + {10, 10}, {11, 11}, {12, 12}, {13, 13} }; + +static const int8_t vsc3316_fsm1_rx[8][2] = { {2, 12}, {3, 13}, {4, 5}, {5, 4}, + {10, 11}, {11, 10}, {12, 2}, {13, 3} }; + +static const int8_t vsc3316_fsm2_rx[8][2] = { {0, 15}, {1, 14}, {6, 7}, {7, 6}, + {8, 9}, {9, 8}, {14, 1}, {15, 0} }; +#endif diff --git a/board/freescale/t4qds/tlb.c b/board/freescale/t4qds/tlb.c new file mode 100644 index 0000000..078a6e4 --- /dev/null +++ b/board/freescale/t4qds/tlb.c @@ -0,0 +1,136 @@ +/* + * Copyright 2008-2012 Freescale Semiconductor, Inc. + * + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/mmu.h> + +struct fsl_e_tlb_entry tlb_table[] = { + /* TLB 0 - for temp stack in cache */ + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, + CONFIG_SYS_INIT_RAM_ADDR_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024, + CONFIG_SYS_INIT_RAM_ADDR_PHYS + 4 * 1024, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024, + CONFIG_SYS_INIT_RAM_ADDR_PHYS + 8 * 1024, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024, + CONFIG_SYS_INIT_RAM_ADDR_PHYS + 12 * 1024, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + + /* TLB 1 */ + /* *I*** - Covers boot page */ +#if defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SYS_INIT_L3_ADDR) + /* + * *I*G - L3SRAM. When L3 is used as 1M SRAM, the address of the + * SRAM is at 0xfff00000, it covered the 0xfffff000. + */ + SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L3_ADDR, CONFIG_SYS_INIT_L3_ADDR, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 0, BOOKE_PAGESZ_1M, 1), +#else + SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 0, BOOKE_PAGESZ_4K, 1), +#endif + + /* *I*G* - CCSRBAR */ + SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 1, BOOKE_PAGESZ_16M, 1), + + /* *I*G* - Flash, localbus */ + /* This will be changed to *I*G* after relocation to RAM. */ + SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS, + MAS3_SX|MAS3_SR, MAS2_W|MAS2_G, + 0, 2, BOOKE_PAGESZ_256M, 1), + + /* *I*G* - PCI */ + SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT, CONFIG_SYS_PCIE1_MEM_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 3, BOOKE_PAGESZ_1G, 1), + + /* *I*G* - PCI */ + SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT + 0x40000000, + CONFIG_SYS_PCIE1_MEM_PHYS + 0x40000000, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 4, BOOKE_PAGESZ_256M, 1), + + SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT + 0x50000000, + CONFIG_SYS_PCIE1_MEM_PHYS + 0x50000000, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 5, BOOKE_PAGESZ_256M, 1), + + /* *I*G* - PCI I/O */ + SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_IO_VIRT, CONFIG_SYS_PCIE1_IO_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 6, BOOKE_PAGESZ_256K, 1), + + /* Bman/Qman */ +#ifdef CONFIG_SYS_BMAN_MEM_PHYS + SET_TLB_ENTRY(1, CONFIG_SYS_BMAN_MEM_BASE, CONFIG_SYS_BMAN_MEM_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 9, BOOKE_PAGESZ_16M, 1), + SET_TLB_ENTRY(1, CONFIG_SYS_BMAN_MEM_BASE + 0x01000000, + CONFIG_SYS_BMAN_MEM_PHYS + 0x01000000, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 10, BOOKE_PAGESZ_16M, 1), +#endif +#ifdef CONFIG_SYS_QMAN_MEM_PHYS + SET_TLB_ENTRY(1, CONFIG_SYS_QMAN_MEM_BASE, CONFIG_SYS_QMAN_MEM_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 11, BOOKE_PAGESZ_16M, 1), + SET_TLB_ENTRY(1, CONFIG_SYS_QMAN_MEM_BASE + 0x01000000, + CONFIG_SYS_QMAN_MEM_PHYS + 0x01000000, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 12, BOOKE_PAGESZ_16M, 1), +#endif +#ifdef CONFIG_SYS_DCSRBAR_PHYS + SET_TLB_ENTRY(1, CONFIG_SYS_DCSRBAR, CONFIG_SYS_DCSRBAR_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 13, BOOKE_PAGESZ_4M, 1), +#endif +#ifdef CONFIG_SYS_NAND_BASE + /* + * *I*G - NAND + * entry 14 and 15 has been used hard coded, they will be disabled + * in cpu_init_f, so we use entry 16 for nand. + */ + SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 16, BOOKE_PAGESZ_1M, 1), +#endif + SET_TLB_ENTRY(1, QIXIS_BASE, QIXIS_BASE_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 17, BOOKE_PAGESZ_4K, 1), + +}; + +int num_tlb_entries = ARRAY_SIZE(tlb_table); @@ -838,6 +838,9 @@ BSC9131RDB_SPIFLASH powerpc mpc85xx bsc9131rdb freesca stxgp3 powerpc mpc85xx stxgp3 stx stxssa powerpc mpc85xx stxssa stx - stxssa stxssa_4M powerpc mpc85xx stxssa stx - stxssa:STXSSA_4M +T4240QDS powerpc mpc85xx t4qds freescale +T4240QDS_SDCARD powerpc mpc85xx t4qds freescale - T4240QDS:RAMBOOT_PBL,SDCARD,SYS_TEXT_BASE=0xFFF80000 +T4240QDS_SPIFLASH powerpc mpc85xx t4qds freescale - T4240QDS:RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF80000 xpedite520x powerpc mpc85xx - xes xpedite537x powerpc mpc85xx - xes xpedite550x powerpc mpc85xx - xes diff --git a/doc/README.VSC3316-3308 b/doc/README.VSC3316-3308 new file mode 100644 index 0000000..925663b --- /dev/null +++ b/doc/README.VSC3316-3308 @@ -0,0 +1,43 @@ +This file contains API information of the initialization code written for +Vitesse cross-point devices, VSC3316 and VSC3308 for board B4860QDS + +Author: Shaveta Leekha <shaveta@freescale.com> + +About Device: +============= +VSC 3316/3308 is a low-power, low-cost asynchronous crosspoint switch capable of data rates upto 11.5Gbps. + +VSC3316 has 16 input and 16 output ports whereas VSC3308 has 8 input and 8 output ports. Programming of these devices are performed by two-wire or four-wire serial interface. + +Initialization: +=============== +On reset, VSC devices are in low-power state with all inputs, outputs and connections in an off state. +First thing required is to program it to interface with either two-wire or four-wire interface. +In our case the interface is two-wire I2C serial interface. So the value in Interface mode register at address 79.h to be written is 0x02 for two-wire interface. Also for crosspoint connections to be activated, 01.h value need to be written in 75.h (core configuration register). + +API Overview: +============= + + vsc_if_enable(u8 vsc_addr): + -------------------------- + This API programs VSC to interface with either two-wire or four-wire interface. In our case the interface is two-wire I2C serial interface. So the value in Interface mode register at address 79.h to be written is 0x02 for two-wire interface. + Parameters: + vsc_addr - Address of the VSC device on board. + + + vsc3316_config(u8 vsc_addr, int con_arr[][2], u8 num_con): + --------------------------------------------------------- + This API configures the VSC3316 device for required connections. Connection through the VSC device requires the inputs and outputs to be properly configured. + Connection registers are on page 00. It Configures the selected input and output correctly and join them to make a connection. It also program Input state register, Global input ISE, Global input LOS, Global core control, Output mode register and core control registers etc. + vsc3308_config(u8 vsc_addr, int con_arr[][2], u8 num_con) does the essential configurations for VSC3308. + + Parameters: + vsc_addr - Address of the VSC device on board. + con_arr - connection array + num_con - number of connections to be configured + + vsc_wp_config(u8 vsc_addr): + -------------------------- + For crosspoint connections to be activated, 01.h value need to be written in 75.h (core configuration register), which is done by this API. + Parameters: + vsc_addr - Address of the VSC device on board. diff --git a/doc/README.fsl-ddr b/doc/README.fsl-ddr index f94b56f..3992640 100644 --- a/doc/README.fsl-ddr +++ b/doc/README.fsl-ddr @@ -103,6 +103,11 @@ The ways to configure the ddr interleaving mode # bank(chip-select) interleaving (cs0+cs1+cs2+cs3) (4x1) setenv hwconfig "fsl_ddr:bank_intlv=cs0_cs1_cs2_cs3" + # bank(chip-select) interleaving (auto) + setenv hwconfig "fsl_ddr:bank_intlv=auto" + This auto mode only select from cs0_cs1_cs2_cs3, cs0_cs1, null dependings + on DIMMs. + Memory controller address hashing ================================== If the DDR controller supports address hashing, it can be enabled by hwconfig. diff --git a/doc/README.mpc85xx-spin-table b/doc/README.mpc85xx-spin-table new file mode 100644 index 0000000..8da768a --- /dev/null +++ b/doc/README.mpc85xx-spin-table @@ -0,0 +1,26 @@ +Spin table in cache +===================================== +As specified by ePAPR v1.1, the spin table needs to be in cached memory. After +DDR is initialized and U-boot relocates itself into DDR, the spin table is +accessible for core 0. It is part of release.S, within 4KB range after +__secondary_start_page. For other cores to use the spin table, the booting +process is described below: + +Core 0 sets up the reset page on the top 4K of memory (or 4GB if total memory +is more than 4GB), and creates a TLB to map it to 0xffff_f000, regardless of +the physical address of this page, with WIMGE=0b01010. Core 0 also enables boot +page translation for secondary cores to use this page of memory. Then 4KB +memory is copied from __secondary_start_page to the boot page, after flusing +cache because this page is mapped as normal DDR. Before copying the reset page, +core 0 puts the physical address of the spin table (which is in release.S and +relocated to the top of mapped memory) into a variable __spin_table_addr so +that secondary cores can see it. + +When secondary cores boot up from 0xffff_f000 page, they only have one default +TLB. While booting, they set up another TLB in AS=1 space and jump into +the new space. The new TLB covers the physical address of the spin table page, +with WIMGE =0b00100. Now secondary cores can keep polling the spin table +without stress DDR bus because both the code and the spin table is in cache. + +For the above to work, DDR has to set the 'M' bit of WIMGE, in order to keep +cache coherence. diff --git a/doc/README.t4240qds b/doc/README.t4240qds new file mode 100644 index 0000000..677d120 --- /dev/null +++ b/doc/README.t4240qds @@ -0,0 +1,98 @@ +Overview +-------- +The T4240QDS is a high-performance computing evaluation, development and test +platform supporting the T4240 QorIQ™ Power Architecture™ processor. T4240QDS is +optimized to support the high-bandwidth DDR3 memory ports, as well as the +highly-configurable SerDes ports. The system is lead-free and RoHS-compliant. + +Board Features + SERDES Connections + 32 lanes grouped into four 8-lane banks + Two “front side” banks dedicated to Ethernet + - High-speed crosspoint switch fabric on selected lanes + - Two PCI Express slots with side-band connector supporting + - SGMII + - XAUI + - HiGig + - I-pass connectors allow board-to-board and loopback support + Two “back side” banks dedicated to other protocols + - High-speed crosspoint switch fabric on all lanes + - Four PCI Express slots with side-band connector supporting + - PCI Express 3.0 + - SATA 2.0 + - SRIO 2.0 + - Supports 4X Aurora debug with two connectors + DDR Controllers + Three independant 64-bit DDR3 controllers + Supports rates of 1866 up to 2133 MHz data-rate + Supports two DDR3/DDR3LP UDIMM/RDIMMs per controller + DDR power supplies 1.5V to all devices with automatic tracking of VTT. + Power software-switchable to 1.35V if software detects all DDR3LP devices. + MT9JSF25672AZ-2G1KZESZF has been tested at 1333, 1600, 1867, 2000 and + 2133MT/s speeds. For 1867MT/s and above, read-to-write turnaround time + increases by 1 clock. + + IFC/Local Bus + NAND flash: 8-bit, async or sync, up to 2GB. + NOR: 16-bit, Address/Data Multiplexed (ADM), up to 128 MB + NOR: 8-bit or 16-bit, non-multiplexed, up to 512MB + - NOR devices support 16 virtual banks + GASIC: Minimal target within Qixis FPGA + PromJET rapid memory download support + Address demultiplexing handled within FPGA. + - Flexible demux allows 8 or 16 bit evaluation. + IFC Debug/Development card + - Support for 32-bit devices + Ethernet + Support two on-board RGMII 10/100/1G ethernet ports. + SGMII and XAUI support via SERDES block (see above). + 1588 support via Symmetricom board. + QIXIS System Logic FPGA + Manages system power and reset sequencing + Manages DUT, board, clock, etc. configuration for dynamic shmoo + Collects V-I-T data in background for code/power profiling. + Supports legacy TMT test features (POSt, IRS, SYSCLK-synchronous assertion) + General fault monitoring and logging + Runs from ATX “hot” power rails allowing operation while system is off. + Clocks + System and DDR clock (SYSCLK, “DDRCLK”) + - Switch selectable to one of 16 common settings in the interval 33MHz-166MHz. + - Software selectable in 1MHz increments from 1-200MHz. + SERDES clocks + - Provides clocks to all SerDes blocks and slots + - 100, 125 and 156.25 MHz + Power Supplies + Dedicated regulators for VDD + - Adjustable from (0.7V to 1.3V at 80A + - Regulators can be controlled by VID and/or software + Dedicated regulator for GVDD_PL: 1.35/1.5V at 22A + - VTT/MVREF automatically track operating voltage + Dedicated regulators/filters for AVDD supplies + Dedicated regulators for other supplies: OVDD, BVDD, DVDD, LVDD, POVDD, etc. + USB + Supports two USB 2.0 ports with integrated PHYs + - One type A, one type micro-AB with 1.0A power per port. + Other IO + eSDHC/MMC + - SDHC card slot + eSPI port + - High-speed serial flash + Two Serial port + Four I2C ports + +Memory map +---------- +The addresses in brackets are physical addresses. + +0x0_0000_0000 (0x0_0000_0000) - 0x0_7fff_ffff 2GB DDR (more than 2GB is initialized but not mapped under with TLB) +0x0_8000_0000 (0xc_0000_0000) - 0x0_dfff_ffff 1.5GB PCIE memory +0x0_f000_0000 (0xf_0000_0000) - 0x0_f03f_ffff 4MB DCSR +0x0_f400_0000 (0xf_f400_0000) - 0x0_f5ff_ffff 32MB BMan +0x0_f600_0000 (0xf_f600_0000) - 0x0_f7ff_ffff 32MB QMan +0x0_f800_0000 (0xf_f800_0000) - 0x0_f803_ffff 256KB PCIE IO +0x0_e000_0000 (0xf_e000_0000) - 0x0_efff_ffff 256MB NOR flash +0x0_fe00_0000 (0xf_fe00_0000) - 0x0_feff_ffff 16MB CCSR +0x0_ffdf_0000 (0xf_ffdf_0000) - 0x0_ffdf_03ff 4KB QIXIS +0x0_ffff_f000 (0x0_7fff_fff0) - 0x0_ffff_ffff 4KB Boot page translation for secondary cores + +The physical address of the last (boot page translation) varies with the actual DDR size. diff --git a/drivers/net/fm/Makefile b/drivers/net/fm/Makefile index cc57354..7a1fcdd 100644 --- a/drivers/net/fm/Makefile +++ b/drivers/net/fm/Makefile @@ -32,6 +32,10 @@ COBJS-y += init.o COBJS-y += tgec.o COBJS-y += tgec_phy.o +# Soc have FMAN v3 with mEMAC +COBJS-$(CONFIG_SYS_FMAN_V3) += memac_phy.o +COBJS-$(CONFIG_SYS_FMAN_V3) += memac.o + # SoC specific SERDES support COBJS-$(CONFIG_P1017) += p1023.o COBJS-$(CONFIG_P1023) += p1023.o @@ -40,6 +44,8 @@ COBJS-$(CONFIG_PPC_P2041) += p5020.o COBJS-$(CONFIG_PPC_P3041) += p5020.o COBJS-$(CONFIG_PPC_P4080) += p4080.o COBJS-$(CONFIG_PPC_P5020) += p5020.o +COBJS-$(CONFIG_PPC_T4240) += t4240.o +COBJS-$(CONFIG_PPC_B4860) += b4860.o endif COBJS := $(COBJS-y) diff --git a/drivers/net/fm/eth.c b/drivers/net/fm/eth.c index 2b616ad..82c787b 100644 --- a/drivers/net/fm/eth.c +++ b/drivers/net/fm/eth.c @@ -1,5 +1,5 @@ /* - * Copyright 2009-2011 Freescale Semiconductor, Inc. + * Copyright 2009-2012 Freescale Semiconductor, Inc. * Dave Liu <daveliu@freescale.com> * * This program is free software; you can redistribute it and/or @@ -28,6 +28,7 @@ #include <phy.h> #include <asm/fsl_dtsec.h> #include <asm/fsl_tgec.h> +#include <asm/fsl_memac.h> #include "fm.h" @@ -47,6 +48,28 @@ static int num_controllers; /* Configure the TBI for SGMII operation */ void dtsec_configure_serdes(struct fm_eth *priv) { +#ifdef CONFIG_SYS_FMAN_V3 + u32 value; + struct mii_dev bus; + bus.priv = priv->mac->phyregs; + + /* SGMII IF mode + AN enable */ + value = PHY_SGMII_IF_MODE_AN | PHY_SGMII_IF_MODE_SGMII; + memac_mdio_write(&bus, 0, MDIO_DEVAD_NONE, 0x14, value); + + /* Dev ability according to SGMII specification */ + value = PHY_SGMII_DEV_ABILITY_SGMII; + memac_mdio_write(&bus, 0, MDIO_DEVAD_NONE, 0x4, value); + + /* Adjust link timer for SGMII - + 1.6 ms in units of 8 ns = 2 * 10^5 = 0x30d40 */ + memac_mdio_write(&bus, 0, MDIO_DEVAD_NONE, 0x13, 0x3); + memac_mdio_write(&bus, 0, MDIO_DEVAD_NONE, 0x12, 0xd40); + + /* Restart AN */ + value = PHY_SGMII_CR_DEF_VAL | PHY_SGMII_CR_RESET_AN; + memac_mdio_write(&bus, 0, MDIO_DEVAD_NONE, 0, value); +#else struct dtsec *regs = priv->mac->base; struct tsec_mii_mng *phyregs = priv->mac->phyregs; @@ -60,15 +83,18 @@ void dtsec_configure_serdes(struct fm_eth *priv) TBIANA_SGMII_ACK); tsec_local_mdio_write(phyregs, in_be32(®s->tbipa), 0, TBI_CR, TBICR_SETTINGS); +#endif } static void dtsec_init_phy(struct eth_device *dev) { struct fm_eth *fm_eth = dev->priv; - struct dtsec *regs = (struct dtsec *)fm_eth->mac->base; +#ifndef CONFIG_SYS_FMAN_V3 + struct dtsec *regs = (struct dtsec *)CONFIG_SYS_FSL_FM1_DTSEC1_ADDR; /* Assign a Physical address to the TBI */ out_be32(®s->tbipa, CONFIG_SYS_TBIPA_VALUE); +#endif if (fm_eth->enet_if == PHY_INTERFACE_MODE_SGMII) dtsec_configure_serdes(fm_eth); @@ -541,6 +567,10 @@ static int fm_eth_init_mac(struct fm_eth *fm_eth, struct ccsr_fman *reg) num = fm_eth->num; +#ifdef CONFIG_SYS_FMAN_V3 + base = ®->memac[num].fm_memac; + phyregs = ®->memac[num].fm_memac_mdio; +#else /* Get the mac registers base address */ if (fm_eth->type == FM_ETH_1G_E) { base = ®->mac_1g[num].fm_dtesc; @@ -549,6 +579,7 @@ static int fm_eth_init_mac(struct fm_eth *fm_eth, struct ccsr_fman *reg) base = ®->mac_10g[num].fm_10gec; phyregs = ®->mac_10g[num].fm_10gec_mdio; } +#endif /* alloc mac controller */ mac = malloc(sizeof(struct fsl_enet_mac)); @@ -559,10 +590,14 @@ static int fm_eth_init_mac(struct fm_eth *fm_eth, struct ccsr_fman *reg) /* save the mac to fm_eth struct */ fm_eth->mac = mac; +#ifdef CONFIG_SYS_FMAN_V3 + init_memac(mac, base, phyregs, MAX_RXBUF_LEN); +#else if (fm_eth->type == FM_ETH_1G_E) init_dtsec(mac, base, phyregs, MAX_RXBUF_LEN); else init_tgec(mac, base, phyregs, MAX_RXBUF_LEN); +#endif return 1; } diff --git a/drivers/net/fm/init.c b/drivers/net/fm/init.c index 736b8b9..ae389b8 100644 --- a/drivers/net/fm/init.c +++ b/drivers/net/fm/init.c @@ -38,6 +38,15 @@ struct fm_eth_info fm_info[] = { #if (CONFIG_SYS_NUM_FM1_DTSEC >= 5) FM_DTSEC_INFO_INITIALIZER(1, 5), #endif +#if (CONFIG_SYS_NUM_FM1_DTSEC >= 6) + FM_DTSEC_INFO_INITIALIZER(1, 6), +#endif +#if (CONFIG_SYS_NUM_FM1_DTSEC >= 7) + FM_DTSEC_INFO_INITIALIZER(1, 9), +#endif +#if (CONFIG_SYS_NUM_FM1_DTSEC >= 8) + FM_DTSEC_INFO_INITIALIZER(1, 10), +#endif #if (CONFIG_SYS_NUM_FM2_DTSEC >= 1) FM_DTSEC_INFO_INITIALIZER(2, 1), #endif @@ -53,6 +62,15 @@ struct fm_eth_info fm_info[] = { #if (CONFIG_SYS_NUM_FM2_DTSEC >= 5) FM_DTSEC_INFO_INITIALIZER(2, 5), #endif +#if (CONFIG_SYS_NUM_FM2_DTSEC >= 6) + FM_DTSEC_INFO_INITIALIZER(2, 6), +#endif +#if (CONFIG_SYS_NUM_FM2_DTSEC >= 7) + FM_DTSEC_INFO_INITIALIZER(2, 9), +#endif +#if (CONFIG_SYS_NUM_FM2_DTSEC >= 8) + FM_DTSEC_INFO_INITIALIZER(2, 10), +#endif #if (CONFIG_SYS_NUM_FM1_10GEC >= 1) FM_TGEC_INFO_INITIALIZER(1, 1), #endif diff --git a/drivers/net/fm/memac.c b/drivers/net/fm/memac.c new file mode 100644 index 0000000..32c7054 --- /dev/null +++ b/drivers/net/fm/memac.c @@ -0,0 +1,132 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * Roy Zang <tie-fei.zang@freescale.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* MAXFRM - maximum frame length */ +#define MAXFRM_MASK 0x0000ffff + +#include <common.h> +#include <phy.h> +#include <asm/types.h> +#include <asm/io.h> +#include <asm/fsl_enet.h> +#include <asm/fsl_memac.h> + +#include "fm.h" + +static void memac_init_mac(struct fsl_enet_mac *mac) +{ + struct memac *regs = mac->base; + + /* mask all interrupt */ + out_be32(®s->imask, IMASK_MASK_ALL); + + /* clear all events */ + out_be32(®s->ievent, IEVENT_CLEAR_ALL); + + /* set the max receive length */ + out_be32(®s->maxfrm, mac->max_rx_len & MAXFRM_MASK); + + /* multicast frame reception for the hash entry disable */ + out_be32(®s->hashtable_ctrl, 0); +} + +static void memac_enable_mac(struct fsl_enet_mac *mac) +{ + struct memac *regs = mac->base; + + setbits_be32(®s->command_config, MEMAC_CMD_CFG_RXTX_EN); +} + +static void memac_disable_mac(struct fsl_enet_mac *mac) +{ + struct memac *regs = mac->base; + + clrbits_be32(®s->command_config, MEMAC_CMD_CFG_RXTX_EN); +} + +static void memac_set_mac_addr(struct fsl_enet_mac *mac, u8 *mac_addr) +{ + struct memac *regs = mac->base; + u32 mac_addr0, mac_addr1; + + /* + * if a station address of 0x12345678ABCD, perform a write to + * MAC_ADDR0 of 0x78563412, MAC_ADDR1 of 0x0000CDAB + */ + mac_addr0 = (mac_addr[3] << 24) | (mac_addr[2] << 16) | \ + (mac_addr[1] << 8) | (mac_addr[0]); + out_be32(®s->mac_addr_0, mac_addr0); + + mac_addr1 = ((mac_addr[5] << 8) | mac_addr[4]) & 0x0000ffff; + out_be32(®s->mac_addr_1, mac_addr1); +} + +static void memac_set_interface_mode(struct fsl_enet_mac *mac, + phy_interface_t type, int speed) +{ + /* Roy need more work here */ + + struct memac *regs = mac->base; + u32 if_mode, if_status; + + /* clear all bits relative with interface mode */ + if_mode = in_be32(®s->if_mode); + if_status = in_be32(®s->if_status); + + /* set interface mode */ + switch (type) { + case PHY_INTERFACE_MODE_GMII: + if_mode &= ~IF_MODE_MASK; + if_mode |= IF_MODE_GMII; + break; + case PHY_INTERFACE_MODE_RGMII: + if_mode |= (IF_MODE_GMII | IF_MODE_RG); + break; + case PHY_INTERFACE_MODE_RMII: + if_mode |= (IF_MODE_GMII | IF_MODE_RM); + break; + case PHY_INTERFACE_MODE_SGMII: + if_mode &= ~IF_MODE_MASK; + if_mode |= (IF_MODE_GMII); + break; + default: + break; + } + /* Enable automatic speed selection */ + if_mode |= IF_MODE_EN_AUTO; + + debug(" %s, if_mode = %x\n", __func__, if_mode); + debug(" %s, if_status = %x\n", __func__, if_status); + out_be32(®s->if_mode, if_mode); + return; +} + +void init_memac(struct fsl_enet_mac *mac, void *base, + void *phyregs, int max_rx_len) +{ + mac->base = base; + mac->phyregs = phyregs; + mac->max_rx_len = max_rx_len; + mac->init_mac = memac_init_mac; + mac->enable_mac = memac_enable_mac; + mac->disable_mac = memac_disable_mac; + mac->set_mac_addr = memac_set_mac_addr; + mac->set_if_mode = memac_set_interface_mode; +} diff --git a/drivers/net/fm/memac_phy.c b/drivers/net/fm/memac_phy.c new file mode 100644 index 0000000..ea6118b --- /dev/null +++ b/drivers/net/fm/memac_phy.c @@ -0,0 +1,150 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * Andy Fleming <afleming@freescale.com> + * Roy Zang <tie-fei.zang@freescale.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * Some part is taken from tsec.c + */ +#include <common.h> +#include <miiphy.h> +#include <phy.h> +#include <asm/io.h> +#include <asm/fsl_memac.h> +#include <fm_eth.h> + +/* + * Write value to the PHY for this device to the register at regnum, waiting + * until the write is done before it returns. All PHY configuration has to be + * done through the TSEC1 MIIM regs + */ +int memac_mdio_write(struct mii_dev *bus, int port_addr, int dev_addr, + int regnum, u16 value) +{ + u32 mdio_ctl; + struct memac_mdio_controller *regs = bus->priv; + u32 c45 = 1; /* Default to 10G interface */ + + if (dev_addr == MDIO_DEVAD_NONE) { + c45 = 0; /* clause 22 */ + dev_addr = regnum & 0x1f; + clrbits_be32(®s->mdio_stat, MDIO_STAT_ENC); + } else { + setbits_be32(®s->mdio_stat, MDIO_STAT_ENC); + setbits_be32(®s->mdio_stat, MDIO_STAT_HOLD_15_CLK); + } + + /* Wait till the bus is free */ + while ((in_be32(®s->mdio_stat)) & MDIO_STAT_BSY) + ; + + /* Set the port and dev addr */ + mdio_ctl = MDIO_CTL_PORT_ADDR(port_addr) | MDIO_CTL_DEV_ADDR(dev_addr); + out_be32(®s->mdio_ctl, mdio_ctl); + + /* Set the register address */ + if (c45) + out_be32(®s->mdio_addr, regnum & 0xffff); + + /* Wait till the bus is free */ + while ((in_be32(®s->mdio_stat)) & MDIO_STAT_BSY) + ; + + /* Write the value to the register */ + out_be32(®s->mdio_data, MDIO_DATA(value)); + + /* Wait till the MDIO write is complete */ + while ((in_be32(®s->mdio_data)) & MDIO_DATA_BSY) + ; + + return 0; +} + +/* + * Reads from register regnum in the PHY for device dev, returning the value. + * Clears miimcom first. All PHY configuration has to be done through the + * TSEC1 MIIM regs + */ +int memac_mdio_read(struct mii_dev *bus, int port_addr, int dev_addr, + int regnum) +{ + u32 mdio_ctl; + struct memac_mdio_controller *regs = bus->priv; + u32 c45 = 1; + + if (dev_addr == MDIO_DEVAD_NONE) { + c45 = 0; /* clause 22 */ + dev_addr = regnum & 0x1f; + clrbits_be32(®s->mdio_stat, MDIO_STAT_ENC); + } else { + setbits_be32(®s->mdio_stat, MDIO_STAT_ENC); + setbits_be32(®s->mdio_stat, MDIO_STAT_HOLD_15_CLK); + } + + /* Wait till the bus is free */ + while ((in_be32(®s->mdio_stat)) & MDIO_STAT_BSY) + ; + + /* Set the Port and Device Addrs */ + mdio_ctl = MDIO_CTL_PORT_ADDR(port_addr) | MDIO_CTL_DEV_ADDR(dev_addr); + out_be32(®s->mdio_ctl, mdio_ctl); + + /* Set the register address */ + if (c45) + out_be32(®s->mdio_addr, regnum & 0xffff); + + /* Wait till the bus is free */ + while ((in_be32(®s->mdio_stat)) & MDIO_STAT_BSY) + ; + + /* Initiate the read */ + mdio_ctl |= MDIO_CTL_READ; + out_be32(®s->mdio_ctl, mdio_ctl); + + /* Wait till the MDIO write is complete */ + while ((in_be32(®s->mdio_data)) & MDIO_DATA_BSY) + ; + + /* Return all Fs if nothing was there */ + if (in_be32(®s->mdio_stat) & MDIO_STAT_RD_ER) + return 0xffff; + + return in_be32(®s->mdio_data) & 0xffff; +} + +int memac_mdio_reset(struct mii_dev *bus) +{ + return 0; +} + +int fm_memac_mdio_init(bd_t *bis, struct memac_mdio_info *info) +{ + struct mii_dev *bus = mdio_alloc(); + + if (!bus) { + printf("Failed to allocate FM TGEC MDIO bus\n"); + return -1; + } + + bus->read = memac_mdio_read; + bus->write = memac_mdio_write; + bus->reset = memac_mdio_reset; + sprintf(bus->name, info->name); + + bus->priv = info->regs; + + return mdio_register(bus); +} diff --git a/drivers/net/fm/t4240.c b/drivers/net/fm/t4240.c new file mode 100644 index 0000000..48c530c --- /dev/null +++ b/drivers/net/fm/t4240.c @@ -0,0 +1,128 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * Roy Zang <tie-fei.zang@freescale.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <common.h> +#include <phy.h> +#include <fm_eth.h> +#include <asm/io.h> +#include <asm/immap_85xx.h> +#include <asm/fsl_serdes.h> + +u32 port_to_devdisr[] = { + [FM1_DTSEC1] = FSL_CORENET_DEVDISR2_DTSEC1_1, + [FM1_DTSEC2] = FSL_CORENET_DEVDISR2_DTSEC1_2, + [FM1_DTSEC3] = FSL_CORENET_DEVDISR2_DTSEC1_3, + [FM1_DTSEC4] = FSL_CORENET_DEVDISR2_DTSEC1_4, + [FM1_DTSEC5] = FSL_CORENET_DEVDISR2_DTSEC1_5, + [FM1_DTSEC6] = FSL_CORENET_DEVDISR2_DTSEC1_6, + [FM1_DTSEC9] = FSL_CORENET_DEVDISR2_DTSEC1_9, + [FM1_DTSEC10] = FSL_CORENET_DEVDISR2_DTSEC1_10, + [FM1_10GEC1] = FSL_CORENET_DEVDISR2_10GEC1_1, + [FM1_10GEC2] = FSL_CORENET_DEVDISR2_10GEC1_2, + [FM2_DTSEC1] = FSL_CORENET_DEVDISR2_DTSEC2_1, + [FM2_DTSEC2] = FSL_CORENET_DEVDISR2_DTSEC2_2, + [FM2_DTSEC3] = FSL_CORENET_DEVDISR2_DTSEC2_3, + [FM2_DTSEC4] = FSL_CORENET_DEVDISR2_DTSEC2_4, + [FM2_DTSEC5] = FSL_CORENET_DEVDISR2_DTSEC2_5, + [FM2_DTSEC6] = FSL_CORENET_DEVDISR2_DTSEC2_6, + [FM2_DTSEC9] = FSL_CORENET_DEVDISR2_DTSEC2_9, + [FM2_DTSEC10] = FSL_CORENET_DEVDISR2_DTSEC2_10, + [FM2_10GEC1] = FSL_CORENET_DEVDISR2_10GEC2_1, + [FM2_10GEC2] = FSL_CORENET_DEVDISR2_10GEC2_2, +}; + +static int is_device_disabled(enum fm_port port) +{ + ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + u32 devdisr2 = in_be32(&gur->devdisr2); + + return port_to_devdisr[port] & devdisr2; +} + +void fman_disable_port(enum fm_port port) +{ + ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + + setbits_be32(&gur->devdisr2, port_to_devdisr[port]); +} + +phy_interface_t fman_port_enet_if(enum fm_port port) +{ + ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + u32 rcwsr13 = in_be32(&gur->rcwsr[13]); + + if (is_device_disabled(port)) + return PHY_INTERFACE_MODE_NONE; + + if ((port == FM1_10GEC1 || port == FM1_10GEC2) + && (is_serdes_configured(XAUI_FM1))) + return PHY_INTERFACE_MODE_XGMII; + + if ((port == FM2_10GEC1 || port == FM2_10GEC2) + && (is_serdes_configured(XAUI_FM2))) + return PHY_INTERFACE_MODE_XGMII; + +#define FSL_CORENET_RCWSR13_EC1 0x60000000 /* bits 417..418 */ +#define FSL_CORENET_RCWSR13_EC1_FM2_DTSEC5_RGMII 0x00000000 +#define FSL_CORENET_RCWSR13_EC1_FM2_GPIO 0x40000000 +#define FSL_CORENET_RCWSR13_EC2 0x18000000 /* bits 419..420 */ +#define FSL_CORENET_RCWSR13_EC2_FM1_DTSEC5_RGMII 0x00000000 +#define FSL_CORENET_RCWSR13_EC2_FM2_DTSEC6_RGMII 0x08000000 +#define FSL_CORENET_RCWSR13_EC2_FM1_GPIO 0x10000000 + /* handle RGMII first */ + if ((port == FM2_DTSEC5) && ((rcwsr13 & FSL_CORENET_RCWSR13_EC1) == + FSL_CORENET_RCWSR13_EC1_FM2_DTSEC5_RGMII)) + return PHY_INTERFACE_MODE_RGMII; + + if ((port == FM1_DTSEC5) && ((rcwsr13 & FSL_CORENET_RCWSR13_EC2) == + FSL_CORENET_RCWSR13_EC2_FM1_DTSEC5_RGMII)) + return PHY_INTERFACE_MODE_RGMII; + + if ((port == FM2_DTSEC6) && ((rcwsr13 & FSL_CORENET_RCWSR13_EC2) == + FSL_CORENET_RCWSR13_EC2_FM2_DTSEC6_RGMII)) + return PHY_INTERFACE_MODE_RGMII; + switch (port) { + case FM1_DTSEC1: + case FM1_DTSEC2: + case FM1_DTSEC3: + case FM1_DTSEC4: + case FM1_DTSEC5: + case FM1_DTSEC6: + case FM1_DTSEC9: + case FM1_DTSEC10: + if (is_serdes_configured(SGMII_FM1_DTSEC1 + port - FM1_DTSEC1)) + return PHY_INTERFACE_MODE_SGMII; + break; + case FM2_DTSEC1: + case FM2_DTSEC2: + case FM2_DTSEC3: + case FM2_DTSEC4: + case FM2_DTSEC5: + case FM2_DTSEC6: + case FM2_DTSEC9: + case FM2_DTSEC10: + if (is_serdes_configured(SGMII_FM2_DTSEC1 + port - FM2_DTSEC1)) + return PHY_INTERFACE_MODE_SGMII; + break; + default: + return PHY_INTERFACE_MODE_NONE; + } + + return PHY_INTERFACE_MODE_NONE; +} diff --git a/drivers/pci/fsl_pci_init.c b/drivers/pci/fsl_pci_init.c index 0d46c96..48ae163 100644 --- a/drivers/pci/fsl_pci_init.c +++ b/drivers/pci/fsl_pci_init.c @@ -1,5 +1,5 @@ /* - * Copyright 2007-2011 Freescale Semiconductor, Inc. + * Copyright 2007-2012 Freescale Semiconductor, Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the Free @@ -211,7 +211,7 @@ static int fsl_pci_setup_inbound_windows(struct pci_controller *hose, return 1; } -#ifdef CONFIG_FSL_CORENET +#ifdef CONFIG_SYS_FSL_SRIO_PCIE_BOOT_MASTER static void fsl_pcie_boot_master(pit_t *pi) { /* configure inbound window for slave's u-boot image */ @@ -276,14 +276,18 @@ static void fsl_pcie_boot_master_release_slave(int port) release_addr = CONFIG_SYS_PCIE1_MEM_VIRT + CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET; break; +#ifdef CONFIG_SYS_PCIE2_MEM_VIRT case 2: release_addr = CONFIG_SYS_PCIE2_MEM_VIRT + CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET; break; +#endif +#ifdef CONFIG_SYS_PCIE3_MEM_VIRT case 3: release_addr = CONFIG_SYS_PCIE3_MEM_VIRT + CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET; break; +#endif default: release_addr = 0; break; @@ -384,7 +388,7 @@ void fsl_pci_init(struct pci_controller *hose, struct fsl_pci_info *pci_info) /* see if we are a PCIe or PCI controller */ pci_hose_read_config_byte(hose, dev, FSL_PCIE_CAP_ID, &pcie_cap); -#ifdef CONFIG_FSL_CORENET +#ifdef CONFIG_SYS_FSL_SRIO_PCIE_BOOT_MASTER /* boot from PCIE --master */ char *s = getenv("bootmaster"); char pcie[6]; @@ -499,13 +503,7 @@ void fsl_pci_init(struct pci_controller *hose, struct fsl_pci_info *pci_info) } #ifndef CONFIG_PCI_NOSCAN - pci_hose_read_config_byte(hose, dev, PCI_CLASS_PROG, &temp8); - - /* Programming Interface (PCI_CLASS_PROG) - * 0 == pci host or pcie root-complex, - * 1 == pci agent or pcie end-point - */ - if (!temp8) { + if (!fsl_is_pci_agent(hose)) { debug(" Scanning PCI bus %02x\n", hose->current_busno); hose->last_busno = pci_hose_scan_bus(hose, hose->current_busno); @@ -543,12 +541,22 @@ void fsl_pci_init(struct pci_controller *hose, struct fsl_pci_info *pci_info) int fsl_is_pci_agent(struct pci_controller *hose) { - u8 prog_if; + u8 pcie_cap; pci_dev_t dev = PCI_BDF(hose->first_busno, 0, 0); - pci_hose_read_config_byte(hose, dev, PCI_CLASS_PROG, &prog_if); + pci_hose_read_config_byte(hose, dev, FSL_PCIE_CAP_ID, &pcie_cap); + if (pcie_cap == PCI_CAP_ID_EXP) { + u8 header_type; - return (prog_if == FSL_PROG_IF_AGENT); + pci_hose_read_config_byte(hose, dev, PCI_HEADER_TYPE, + &header_type); + return (header_type & 0x7f) == PCI_HEADER_TYPE_NORMAL; + } else { + u8 prog_if; + + pci_hose_read_config_byte(hose, dev, PCI_CLASS_PROG, &prog_if); + return (prog_if == FSL_PROG_IF_AGENT); + } } int fsl_pci_init_port(struct fsl_pci_info *pci_info, @@ -594,7 +602,7 @@ int fsl_pci_init_port(struct fsl_pci_info *pci_info, if (fsl_is_pci_agent(hose)) { fsl_pci_config_unlock(hose); hose->last_busno = hose->first_busno; -#ifdef CONFIG_FSL_CORENET +#ifdef CONFIG_SYS_FSL_SRIO_PCIE_BOOT_MASTER } else { /* boot from PCIE --master releases slave's core 0 */ char *s = getenv("bootmaster"); @@ -618,12 +626,10 @@ int fsl_pci_init_port(struct fsl_pci_info *pci_info, void fsl_pci_config_unlock(struct pci_controller *hose) { pci_dev_t dev = PCI_BDF(hose->first_busno,0,0); - u8 agent; u8 pcie_cap; u16 pbfr; - pci_hose_read_config_byte(hose, dev, PCI_CLASS_PROG, &agent); - if (!agent) + if (!fsl_is_pci_agent(hose)) return; pci_hose_read_config_byte(hose, dev, FSL_PCIE_CAP_ID, &pcie_cap); @@ -660,10 +666,17 @@ int fsl_configure_pcie(struct fsl_pci_info *info, } #if defined(CONFIG_FSL_CORENET) +#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2 + #define _DEVDISR_PCIE1 FSL_CORENET_DEVDISR3_PCIE1 + #define _DEVDISR_PCIE2 FSL_CORENET_DEVDISR3_PCIE2 + #define _DEVDISR_PCIE3 FSL_CORENET_DEVDISR3_PCIE3 + #define _DEVDISR_PCIE4 FSL_CORENET_DEVDISR3_PCIE4 +#else #define _DEVDISR_PCIE1 FSL_CORENET_DEVDISR_PCIE1 #define _DEVDISR_PCIE2 FSL_CORENET_DEVDISR_PCIE2 #define _DEVDISR_PCIE3 FSL_CORENET_DEVDISR_PCIE3 #define _DEVDISR_PCIE4 FSL_CORENET_DEVDISR_PCIE4 +#endif #define CONFIG_SYS_MPC8xxx_GUTS_ADDR CONFIG_SYS_MPC85xx_GUTS_ADDR #elif defined(CONFIG_MPC85xx) #define _DEVDISR_PCIE1 MPC85xx_DEVDISR_PCIE @@ -743,34 +756,42 @@ int fsl_pcie_init_board(int busno) { struct fsl_pci_info pci_info; ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC8xxx_GUTS_ADDR; - u32 devdisr = in_be32(&gur->devdisr); + u32 devdisr; + u32 *addr; + +#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2 + addr = &gur->devdisr3; +#else + addr = &gur->devdisr; +#endif + devdisr = in_be32(addr); #ifdef CONFIG_PCIE1 SET_STD_PCIE_INFO(pci_info, 1); busno = fsl_pcie_init_ctrl(busno, devdisr, PCIE1, &pci_info); #else - setbits_be32(&gur->devdisr, _DEVDISR_PCIE1); /* disable */ + setbits_be32(addr, _DEVDISR_PCIE1); /* disable */ #endif #ifdef CONFIG_PCIE2 SET_STD_PCIE_INFO(pci_info, 2); busno = fsl_pcie_init_ctrl(busno, devdisr, PCIE2, &pci_info); #else - setbits_be32(&gur->devdisr, _DEVDISR_PCIE2); /* disable */ + setbits_be32(addr, _DEVDISR_PCIE2); /* disable */ #endif #ifdef CONFIG_PCIE3 SET_STD_PCIE_INFO(pci_info, 3); busno = fsl_pcie_init_ctrl(busno, devdisr, PCIE3, &pci_info); #else - setbits_be32(&gur->devdisr, _DEVDISR_PCIE3); /* disable */ + setbits_be32(addr, _DEVDISR_PCIE3); /* disable */ #endif #ifdef CONFIG_PCIE4 SET_STD_PCIE_INFO(pci_info, 4); busno = fsl_pcie_init_ctrl(busno, devdisr, PCIE4, &pci_info); #else - setbits_be32(&gur->devdisr, _DEVDISR_PCIE4); /* disable */ + setbits_be32(addr, _DEVDISR_PCIE4); /* disable */ #endif return busno; diff --git a/drivers/spi/fsl_espi.c b/drivers/spi/fsl_espi.c index a1ebd33..eb99e90 100644 --- a/drivers/spi/fsl_espi.c +++ b/drivers/spi/fsl_espi.c @@ -216,10 +216,8 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *data_out, return 1; } memcpy(buffer, cmd_buf, cmd_len); - if (cmd_len != 1) { - if (data_in == NULL) - memcpy(buffer + cmd_len, data_out, data_len); - } + if (data_in == NULL) + memcpy(buffer + cmd_len, data_out, data_len); break; case SPI_XFER_BEGIN | SPI_XFER_END: len = data_len; diff --git a/include/config_phylib_all_drivers.h b/include/config_phylib_all_drivers.h index 1db7cec..12828c6 100644 --- a/include/config_phylib_all_drivers.h +++ b/include/config_phylib_all_drivers.h @@ -23,6 +23,7 @@ #define CONFIG_PHY_NATSEMI #define CONFIG_PHY_LXT #define CONFIG_PHY_ATHEROS +#define CONFIG_PHY_SMSC #ifdef CONFIG_PHYLIB_10G #define CONFIG_PHY_TERANETICS diff --git a/include/configs/P3041DS.h b/include/configs/P3041DS.h index 98e7a42..cf184e7 100644 --- a/include/configs/P3041DS.h +++ b/include/configs/P3041DS.h @@ -36,6 +36,10 @@ #define CONFIG_PCIE4 #define CONFIG_SYS_DPAA_RMAN +#define CONFIG_SYS_SRIO +#define CONFIG_SRIO1 /* SRIO port 1 */ +#define CONFIG_SRIO2 /* SRIO port 2 */ + #define CONFIG_ICS307_REFCLK_HZ 25000000 /* ICS307 ref clk freq */ #include "corenet_ds.h" diff --git a/include/configs/P4080DS.h b/include/configs/P4080DS.h index d6f2f5c..53979dd 100644 --- a/include/configs/P4080DS.h +++ b/include/configs/P4080DS.h @@ -33,6 +33,10 @@ #define CONFIG_MMC #define CONFIG_PCIE3 +#define CONFIG_SYS_SRIO +#define CONFIG_SRIO1 /* SRIO port 1 */ +#define CONFIG_SRIO2 /* SRIO port 2 */ + #define CONFIG_ICS307_REFCLK_HZ 33333000 /* ICS307 ref clk freq */ #include "corenet_ds.h" diff --git a/include/configs/P5020DS.h b/include/configs/P5020DS.h index 8625f76..7018d7a 100644 --- a/include/configs/P5020DS.h +++ b/include/configs/P5020DS.h @@ -37,6 +37,10 @@ #define CONFIG_SYS_FSL_RAID_ENGINE #define CONFIG_SYS_DPAA_RMAN +#define CONFIG_SYS_SRIO +#define CONFIG_SRIO1 /* SRIO port 1 */ +#define CONFIG_SRIO2 /* SRIO port 2 */ + #define CONFIG_ICS307_REFCLK_HZ 25000000 /* ICS307 ref clk freq */ #include "corenet_ds.h" diff --git a/include/configs/T4240QDS.h b/include/configs/T4240QDS.h new file mode 100644 index 0000000..76b3ca6 --- /dev/null +++ b/include/configs/T4240QDS.h @@ -0,0 +1,35 @@ +/* + * Copyright 2011-2012 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * T4240 QDS board configuration file + */ +#define CONFIG_T4240QDS +#define CONFIG_PHYS_64BIT +#define CONFIG_PPC_T4240 + +#define CONFIG_FSL_SATA_V2 +#define CONFIG_PCIE4 + +#define CONFIG_ICS307_REFCLK_HZ 25000000 /* ICS307 ref clk freq */ + +#include "t4qds.h" diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h index 8489d16..c41b039 100644 --- a/include/configs/corenet_ds.h +++ b/include/configs/corenet_ds.h @@ -76,10 +76,6 @@ #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ -#define CONFIG_SYS_SRIO -#define CONFIG_SRIO1 /* SRIO port 1 */ -#define CONFIG_SRIO2 /* SRIO port 2 */ - #define CONFIG_FSL_LAW /* Use common FSL init code */ #define CONFIG_ENV_OVERWRITE diff --git a/include/configs/t4qds.h b/include/configs/t4qds.h new file mode 100644 index 0000000..d58c24c --- /dev/null +++ b/include/configs/t4qds.h @@ -0,0 +1,875 @@ +/* + * Copyright 2011-2012 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * Corenet DS style board configuration file + */ +#ifndef __CONFIG_H +#define __CONFIG_H + +#ifdef CONFIG_RAMBOOT_PBL +#define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE +#define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc +#endif + +#define CONFIG_CMD_REGINFO + +/* High Level Configuration Options */ +#define CONFIG_BOOKE +#define CONFIG_E6500 +#define CONFIG_E500 /* BOOKE e500 family */ +#define CONFIG_E500MC /* BOOKE e500mc family */ +#define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ +#define CONFIG_MPC85xx /* MPC85xx/PQ3 platform */ +#define CONFIG_FSL_CORENET /* Freescale CoreNet platform */ +#define CONFIG_MP /* support multiple processors */ + +#ifndef CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_TEXT_BASE 0xeff80000 +#endif + +#ifndef CONFIG_RESET_VECTOR_ADDRESS +#define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc +#endif + +#define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */ +#define CONFIG_SYS_NUM_CPC CONFIG_NUM_DDR_CONTROLLERS +#define CONFIG_FSL_IFC /* Enable IFC Support */ +#define CONFIG_PCI /* Enable PCI/PCIE */ +#define CONFIG_PCIE1 /* PCIE controler 1 */ +#define CONFIG_PCIE2 /* PCIE controler 2 */ +#define CONFIG_PCIE3 /* PCIE controler 3 */ +#define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ +#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ + +#define CONFIG_SYS_SRIO +#define CONFIG_SRIO1 /* SRIO port 1 */ +#define CONFIG_SRIO2 /* SRIO port 2 */ + +#define CONFIG_FSL_LAW /* Use common FSL init code */ + +#define CONFIG_ENV_OVERWRITE + +#ifdef CONFIG_SYS_NO_FLASH +#define CONFIG_ENV_IS_NOWHERE +#else +#define CONFIG_FLASH_CFI_DRIVER +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE +#endif + +#ifndef CONFIG_SYS_NO_FLASH +#if defined(CONFIG_SPIFLASH) +#define CONFIG_SYS_EXTRA_ENV_RELOC +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_ENV_SPI_BUS 0 +#define CONFIG_ENV_SPI_CS 0 +#define CONFIG_ENV_SPI_MAX_HZ 10000000 +#define CONFIG_ENV_SPI_MODE 0 +#define CONFIG_ENV_SIZE 0x2000 /* 8KB */ +#define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ +#define CONFIG_ENV_SECT_SIZE 0x10000 +#elif defined(CONFIG_SDCARD) +#define CONFIG_SYS_EXTRA_ENV_RELOC +#define CONFIG_ENV_IS_IN_MMC +#define CONFIG_SYS_MMC_ENV_DEV 0 +#define CONFIG_ENV_SIZE 0x2000 +#define CONFIG_ENV_OFFSET (512 * 1097) +#elif defined(CONFIG_NAND) +#define CONFIG_SYS_EXTRA_ENV_RELOC +#define CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE +#define CONFIG_ENV_OFFSET (5 * CONFIG_SYS_NAND_BLOCK_SIZE) +#else +#define CONFIG_ENV_IS_IN_FLASH +#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) +#define CONFIG_ENV_SIZE 0x2000 +#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ +#endif +#else /* CONFIG_SYS_NO_FLASH */ +#define CONFIG_ENV_SIZE 0x2000 +#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ +#endif + + + +#define CONFIG_SYS_CLK_FREQ get_board_sys_clk() +#define CONFIG_DDR_CLK_FREQ get_board_ddr_clk() + +#ifndef __ASSEMBLY__ +unsigned long get_board_sys_clk(void); +unsigned long get_board_ddr_clk(void); +#endif + +/* + * These can be toggled for performance analysis, otherwise use default. + */ +#define CONFIG_SYS_CACHE_STASHING +#define CONFIG_BTB /* toggle branch predition */ +#define CONFIG_DDR_ECC +#ifdef CONFIG_DDR_ECC +#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER +#define CONFIG_MEM_INIT_VALUE 0xdeadbeef +#endif + +#define CONFIG_ENABLE_36BIT_PHYS + +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_ADDR_MAP +#define CONFIG_SYS_NUM_ADDR_MAP 64 /* number of TLB1 entries */ +#endif + +#if 0 +#define CONFIG_POST CONFIG_SYS_POST_MEMORY /* test POST memory test */ +#endif +#define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ +#define CONFIG_SYS_MEMTEST_END 0x00400000 +#define CONFIG_SYS_ALT_MEMTEST +#define CONFIG_PANIC_HANG /* do not reset board on panic */ + +/* + * Config the L3 Cache as L3 SRAM + */ +#define CONFIG_SYS_INIT_L3_ADDR CONFIG_RAMBOOT_TEXT_BASE + +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_DCSRBAR 0xf0000000 +#define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull +#endif + +/* EEPROM */ +#define CONFIG_ID_EEPROM +#define CONFIG_SYS_I2C_EEPROM_NXID +#define CONFIG_SYS_EEPROM_BUS_NUM 0 +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 + +/* + * DDR Setup + */ +#define CONFIG_VERY_BIG_RAM +#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 +#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE + +/* CONFIG_NUM_DDR_CONTROLLERS is defined in include/asm/config_mpc85xx.h */ +#define CONFIG_DIMM_SLOTS_PER_CTLR 2 +#define CONFIG_CHIP_SELECTS_PER_CTRL 4 +#define CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE + +#define CONFIG_DDR_SPD +#define CONFIG_FSL_DDR3 + +#define CONFIG_SYS_SPD_BUS_NUM 0 +#define SPD_EEPROM_ADDRESS1 0x51 +#define SPD_EEPROM_ADDRESS2 0x52 +#define SPD_EEPROM_ADDRESS3 0x53 +#define SPD_EEPROM_ADDRESS4 0x54 +#define SPD_EEPROM_ADDRESS5 0x55 +#define SPD_EEPROM_ADDRESS6 0x56 +#define SPD_EEPROM_ADDRESS SPD_EEPROM_ADDRESS1 /* for p3041/p5010 */ +#define CONFIG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */ + +/* + * IFC Definitions + */ +#define CONFIG_SYS_FLASH_BASE 0xe0000000 +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE) +#else +#define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE +#endif + +#define CONFIG_SYS_NOR0_CSPR_EXT (0xf) +#define CONFIG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \ + + 0x8000000) | \ + CSPR_PORT_SIZE_16 | \ + CSPR_MSEL_NOR | \ + CSPR_V) +#define CONFIG_SYS_NOR1_CSPR_EXT (0xf) +#define CONFIG_SYS_NOR1_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \ + CSPR_PORT_SIZE_16 | \ + CSPR_MSEL_NOR | \ + CSPR_V) +#define CONFIG_SYS_NOR_AMASK IFC_AMASK(128*1024*1024) +/* NOR Flash Timing Params */ +#define CONFIG_SYS_NOR_CSOR CSOR_NAND_TRHZ_80 + +#define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x01) | \ + FTIM0_NOR_TEADC(0x01) | \ + FTIM0_NOR_TEAHC(0x20)) +#define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) | \ + FTIM1_NOR_TRAD_NOR(0x1A) |\ + FTIM1_NOR_TSEQRAD_NOR(0x13)) +#define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x01) | \ + FTIM2_NOR_TCH(0x0E) | \ + FTIM2_NOR_TWPH(0x0E) | \ + FTIM2_NOR_TWP(0x1c)) +#define CONFIG_SYS_NOR_FTIM3 0x0 + +#define CONFIG_SYS_FLASH_QUIET_TEST +#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ + +#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ +#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ +#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ + +#define CONFIG_SYS_FLASH_EMPTY_INFO +#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS \ + + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS} + +#define CONFIG_FSL_QIXIS /* use common QIXIS code */ +#define QIXIS_BASE 0xffdf0000 +#define QIXIS_LBMAP_SWITCH 6 +#define QIXIS_LBMAP_MASK 0x0f +#define QIXIS_LBMAP_SHIFT 0 +#define QIXIS_LBMAP_DFLTBANK 0x00 +#define QIXIS_LBMAP_ALTBANK 0x04 +#define QIXIS_RST_CTL_RESET 0x83 +#define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x20 +#define QIXIS_RCFG_CTL_RECONFIG_START 0x21 +#define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08 +#ifdef CONFIG_PHYS_64BIT +#define QIXIS_BASE_PHYS (0xf00000000ull | QIXIS_BASE) +#else +#define QIXIS_BASE_PHYS QIXIS_BASE +#endif + +#define CONFIG_SYS_CSPR3_EXT (0xf) +#define CONFIG_SYS_CSPR3 (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \ + | CSPR_PORT_SIZE_8 \ + | CSPR_MSEL_GPCM \ + | CSPR_V) +#define CONFIG_SYS_AMASK3 IFC_AMASK(64*1024) +#define CONFIG_SYS_CSOR3 0x0 +/* QIXIS Timing parameters for IFC CS3 */ +#define CONFIG_SYS_CS3_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \ + FTIM0_GPCM_TEADC(0x0e) | \ + FTIM0_GPCM_TEAHC(0x0e)) +#define CONFIG_SYS_CS3_FTIM1 (FTIM1_GPCM_TACO(0xff) | \ + FTIM1_GPCM_TRAD(0x3f)) +#define CONFIG_SYS_CS3_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \ + FTIM2_GPCM_TCH(0x0) | \ + FTIM2_GPCM_TWP(0x1f)) +#define CONFIG_SYS_CS3_FTIM3 0x0 + +/* NAND Flash on IFC */ +#define CONFIG_NAND_FSL_IFC +#define CONFIG_SYS_NAND_BASE 0xff800000 +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_NAND_BASE_PHYS (0xf00000000ull | CONFIG_SYS_NAND_BASE) +#else +#define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE +#endif + +#define CONFIG_SYS_NAND_CSPR_EXT (0xf) +#define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ + | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \ + | CSPR_MSEL_NAND /* MSEL = NAND */ \ + | CSPR_V) +#define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024) + +#define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ + | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ + | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ + | CSOR_NAND_RAL_3 /* RAL = 2Byes */ \ + | CSOR_NAND_PGS_2K /* Page Size = 2K */ \ + | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \ + | CSOR_NAND_PB(64)) /*Pages Per Block = 64*/ + +#define CONFIG_SYS_NAND_ONFI_DETECTION + +/* ONFI NAND Flash mode0 Timing Params */ +#define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x07) | \ + FTIM0_NAND_TWP(0x18) | \ + FTIM0_NAND_TWCHT(0x07) | \ + FTIM0_NAND_TWH(0x0a)) +#define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x32) | \ + FTIM1_NAND_TWBE(0x39) | \ + FTIM1_NAND_TRR(0x0e) | \ + FTIM1_NAND_TRP(0x18)) +#define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x0f) | \ + FTIM2_NAND_TREH(0x0a) | \ + FTIM2_NAND_TWHRE(0x1e)) +#define CONFIG_SYS_NAND_FTIM3 0x0 + +#define CONFIG_SYS_NAND_DDR_LAW 11 + +#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_MTD_NAND_VERIFY_WRITE +#define CONFIG_CMD_NAND + +#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) + +#if defined(CONFIG_NAND) +#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NAND_CSPR_EXT +#define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR +#define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK +#define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR +#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0 +#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1 +#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2 +#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3 +#define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NOR0_CSPR_EXT +#define CONFIG_SYS_CSPR2 CONFIG_SYS_NOR0_CSPR +#define CONFIG_SYS_AMASK2 CONFIG_SYS_NOR_AMASK +#define CONFIG_SYS_CSOR2 CONFIG_SYS_NOR_CSOR +#define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NOR_FTIM0 +#define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NOR_FTIM1 +#define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NOR_FTIM2 +#define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NOR_FTIM3 +#else +#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT +#define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR +#define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK +#define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR +#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0 +#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1 +#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2 +#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3 +#define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NAND_CSPR_EXT +#define CONFIG_SYS_CSPR2 CONFIG_SYS_NAND_CSPR +#define CONFIG_SYS_AMASK2 CONFIG_SYS_NAND_AMASK +#define CONFIG_SYS_CSOR2 CONFIG_SYS_NAND_CSOR +#define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NAND_FTIM0 +#define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NAND_FTIM1 +#define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NAND_FTIM2 +#define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NAND_FTIM3 +#endif +#define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR1_CSPR_EXT +#define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR1_CSPR +#define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK +#define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR +#define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0 +#define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1 +#define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2 +#define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3 + +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE + +#if defined(CONFIG_RAMBOOT_PBL) +#define CONFIG_SYS_RAMBOOT +#endif + +#define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */ +#define CONFIG_MISC_INIT_R + +#define CONFIG_HWCONFIG + +/* define to use L1 as initial stack */ +#define CONFIG_L1_INIT_RAM +#define CONFIG_SYS_INIT_RAM_LOCK +#define CONFIG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */ +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf +#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW 0xfe0ec000 +/* The assembler doesn't like typecast */ +#define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ + ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ + CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) +#else +#define CONFIG_SYS_INIT_RAM_ADDR_PHYS 0xfe0ec000 /* Initial L1 address */ +#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0 +#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS +#endif +#define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 + +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ + GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET + +#define CONFIG_SYS_MONITOR_LEN (512 * 1024) +#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) + +/* Serial Port - controlled on board with jumper J8 + * open - index 2 + * shorted - index 1 + */ +#define CONFIG_CONS_INDEX 1 +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)/2) + +#define CONFIG_SYS_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} + +#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500) +#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600) +#define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500) +#define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600) + +/* Use the HUSH parser */ +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " + +/* pass open firmware flat tree */ +#define CONFIG_OF_LIBFDT +#define CONFIG_OF_BOARD_SETUP +#define CONFIG_OF_STDOUT_VIA_ALIAS + +/* new uImage format support */ +#define CONFIG_FIT +#define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */ + +/* I2C */ +#define CONFIG_FSL_I2C /* Use FSL common I2C driver */ +#define CONFIG_HARD_I2C /* I2C with hardware support */ +#define CONFIG_I2C_MULTI_BUS +#define CONFIG_I2C_CMD_TREE +#define CONFIG_SYS_I2C_SPEED 100000 /* I2C speed */ +#define CONFIG_SYS_I2C_SLAVE 0x7F +#define CONFIG_SYS_I2C_OFFSET 0x118000 +#define CONFIG_SYS_I2C2_OFFSET 0x118100 +#define I2C_MUX_PCA_ADDR_PRI 0x77 /* I2C bus multiplexer,primary */ +#define I2C_MUX_PCA_ADDR_SEC 0x76 /* I2C bus multiplexer,secondary */ + +/* VSC Crossbar switches */ +#define CONFIG_VSC_CROSSBAR +#define I2C_MUX_CH_DEFAULT 0x8 +#define I2C_MUX_CH_VSC3316_FS 0xc +#define I2C_MUX_CH_VSC3316_BS 0xd +#define VSC3316_FSM_TX_ADDR 0x70 +#define VSC3316_FSM_RX_ADDR 0x71 + +/* + * RapidIO + */ +#define CONFIG_SYS_SRIO1_MEM_VIRT 0xa0000000 +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_SRIO1_MEM_PHYS 0xc20000000ull +#else +#define CONFIG_SYS_SRIO1_MEM_PHYS 0xa0000000 +#endif +#define CONFIG_SYS_SRIO1_MEM_SIZE 0x10000000 /* 256M */ + +#define CONFIG_SYS_SRIO2_MEM_VIRT 0xb0000000 +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_SRIO2_MEM_PHYS 0xc30000000ull +#else +#define CONFIG_SYS_SRIO2_MEM_PHYS 0xb0000000 +#endif +#define CONFIG_SYS_SRIO2_MEM_SIZE 0x10000000 /* 256M */ + +/* + * for slave u-boot IMAGE instored in master memory space, + * PHYS must be aligned based on the SIZE + */ +#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef080000ull +#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff80000ull +#define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x80000 /* 512K */ +#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff80000ull +/* + * for slave UCODE and ENV instored in master memory space, + * PHYS must be aligned based on the SIZE + */ +#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef040000ull +#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull +#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000 /* 256K */ + +/* slave core release by master*/ +#define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4 +#define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */ + +/* + * SRIO_PCIE_BOOT - SLAVE + */ +#ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE +#define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000 +#define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \ + (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR) +#endif +/* + * eSPI - Enhanced SPI + */ +#define CONFIG_FSL_ESPI +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_SPANSION +#define CONFIG_CMD_SF +#define CONFIG_SF_DEFAULT_SPEED 10000000 +#define CONFIG_SF_DEFAULT_MODE 0 + +/* + * General PCI + * Memory space is mapped 1-1, but I/O space must start from 0. + */ + +/* controller 1, direct to uli, tgtid 3, Base address 20000 */ +#define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 +#define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull +#else +#define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 +#define CONFIG_SYS_PCIE1_MEM_PHYS 0x80000000 +#endif +#define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ +#define CONFIG_SYS_PCIE1_IO_VIRT 0xf8000000 +#define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_PCIE1_IO_PHYS 0xff8000000ull +#else +#define CONFIG_SYS_PCIE1_IO_PHYS 0xf8000000 +#endif +#define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ + +/* controller 2, Slot 2, tgtid 2, Base address 201000 */ +#define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000 +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000 +#define CONFIG_SYS_PCIE2_MEM_PHYS 0xc20000000ull +#else +#define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000 +#define CONFIG_SYS_PCIE2_MEM_PHYS 0xa0000000 +#endif +#define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */ +#define CONFIG_SYS_PCIE2_IO_VIRT 0xf8010000 +#define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_PCIE2_IO_PHYS 0xff8010000ull +#else +#define CONFIG_SYS_PCIE2_IO_PHYS 0xf8010000 +#endif +#define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ + +/* controller 3, Slot 1, tgtid 1, Base address 202000 */ +#define CONFIG_SYS_PCIE3_MEM_VIRT 0xc0000000 +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000 +#define CONFIG_SYS_PCIE3_MEM_PHYS 0xc40000000ull +#else +#define CONFIG_SYS_PCIE3_MEM_BUS 0xc0000000 +#define CONFIG_SYS_PCIE3_MEM_PHYS 0xc0000000 +#endif +#define CONFIG_SYS_PCIE3_MEM_SIZE 0x20000000 /* 512M */ +#define CONFIG_SYS_PCIE3_IO_VIRT 0xf8020000 +#define CONFIG_SYS_PCIE3_IO_BUS 0x00000000 +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_PCIE3_IO_PHYS 0xff8020000ull +#else +#define CONFIG_SYS_PCIE3_IO_PHYS 0xf8020000 +#endif +#define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */ + +/* controller 4, Base address 203000 */ +#define CONFIG_SYS_PCIE4_MEM_BUS 0xe0000000 +#define CONFIG_SYS_PCIE4_MEM_PHYS 0xc60000000ull +#define CONFIG_SYS_PCIE4_MEM_SIZE 0x20000000 /* 512M */ +#define CONFIG_SYS_PCIE4_IO_BUS 0x00000000 +#define CONFIG_SYS_PCIE4_IO_PHYS 0xff8030000ull +#define CONFIG_SYS_PCIE4_IO_SIZE 0x00010000 /* 64k */ + +/* Qman/Bman */ +#ifndef CONFIG_NOBQFMAN +#define CONFIG_SYS_DPAA_QBMAN /* Support Q/Bman */ +#define CONFIG_SYS_BMAN_NUM_PORTALS 50 +#define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull +#else +#define CONFIG_SYS_BMAN_MEM_PHYS CONFIG_SYS_BMAN_MEM_BASE +#endif +#define CONFIG_SYS_BMAN_MEM_SIZE 0x02000000 +#define CONFIG_SYS_QMAN_NUM_PORTALS 50 +#define CONFIG_SYS_QMAN_MEM_BASE 0xf6000000 +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_QMAN_MEM_PHYS 0xff6000000ull +#else +#define CONFIG_SYS_QMAN_MEM_PHYS CONFIG_SYS_QMAN_MEM_BASE +#endif +#define CONFIG_SYS_QMAN_MEM_SIZE 0x02000000 + +#define CONFIG_SYS_DPAA_FMAN +#define CONFIG_SYS_DPAA_PME +#define CONFIG_SYS_PMAN +#define CONFIG_SYS_DPAA_DCE +#define CONFIG_SYS_INTERLAKEN + +/* Default address of microcode for the Linux Fman driver */ +#if defined(CONFIG_SPIFLASH) +/* + * env is stored at 0x100000, sector size is 0x10000, ucode is stored after + * env, so we got 0x110000. + */ +#define CONFIG_SYS_QE_FW_IN_SPIFLASH +#define CONFIG_SYS_QE_FMAN_FW_ADDR 0x110000 +#elif defined(CONFIG_SDCARD) +/* + * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is + * about 545KB (1089 blocks), Env is stored after the image, and the env size is + * 0x2000 (16 blocks), 8 + 1089 + 16 = 1113, enlarge it to 1130. + */ +#define CONFIG_SYS_QE_FMAN_FW_IN_MMC +#define CONFIG_SYS_QE_FMAN_FW_ADDR (512 * 1130) +#elif defined(CONFIG_NAND) +#define CONFIG_SYS_QE_FMAN_FW_IN_NAND +#define CONFIG_SYS_QE_FMAN_FW_ADDR (6 * CONFIG_SYS_NAND_BLOCK_SIZE) +#else +#define CONFIG_SYS_QE_FMAN_FW_IN_NOR +#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xEFF40000 +#endif +#define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 +#define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) +#endif /* CONFIG_NOBQFMAN */ + +#ifdef CONFIG_SYS_DPAA_FMAN +#define CONFIG_FMAN_ENET +#define CONFIG_PHYLIB_10G +#define CONFIG_PHY_VITESSE +#define CONFIG_PHY_TERANETICS +#define SGMII_CARD_PORT1_PHY_ADDR 0x1C +#define SGMII_CARD_PORT2_PHY_ADDR 0x1D +#define SGMII_CARD_PORT3_PHY_ADDR 0x1E +#define SGMII_CARD_PORT4_PHY_ADDR 0x1F +#define XFI_CARD_PORT1_PHY_ADDR 0x1 /* tmp, FIXME below addr */ +#define XFI_CARD_PORT2_PHY_ADDR 0x2 +#define XFI_CARD_PORT3_PHY_ADDR 0x3 +#define XFI_CARD_PORT4_PHY_ADDR 0x4 +#define QSGMII_CARD_PHY_ADDR 0x5 +#define FM1_10GEC1_PHY_ADDR 0x6 +#define FM1_10GEC2_PHY_ADDR 0x7 +#define FM2_10GEC1_PHY_ADDR 0x8 +#define FM2_10GEC2_PHY_ADDR 0x9 +#endif + +#ifdef CONFIG_PCI +#define CONFIG_NET_MULTI +#define CONFIG_PCI_PNP /* do pci plug-and-play */ +#define CONFIG_E1000 + +#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ +#define CONFIG_DOS_PARTITION +#endif /* CONFIG_PCI */ + +/* SATA */ +#ifdef CONFIG_FSL_SATA_V2 +#define CONFIG_LIBATA +#define CONFIG_FSL_SATA + +#define CONFIG_SYS_SATA_MAX_DEVICE 2 +#define CONFIG_SATA1 +#define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR +#define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA +#define CONFIG_SATA2 +#define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR +#define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA + +#define CONFIG_LBA48 +#define CONFIG_CMD_SATA +#define CONFIG_DOS_PARTITION +#define CONFIG_CMD_EXT2 +#endif + +#ifdef CONFIG_FMAN_ENET +#define CONFIG_MII /* MII PHY management */ +#define CONFIG_ETHPRIME "FM1@DTSEC1" +#define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ +#endif + +/* + * Environment + */ +#define CONFIG_LOADS_ECHO /* echo on for serial download */ +#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_ELF +#define CONFIG_CMD_ERRATA +#define CONFIG_CMD_GREPENV +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING +#define CONFIG_CMD_SETEXPR + +#ifdef CONFIG_PCI +#define CONFIG_CMD_PCI +#define CONFIG_CMD_NET +#endif + +/* +* USB +*/ +#define CONFIG_CMD_USB +#define CONFIG_USB_STORAGE +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_FSL +#define CONFIG_EHCI_HCD_INIT_AFTER_RESET +#define CONFIG_CMD_EXT2 +#define CONFIG_HAS_FSL_DR_USB + +#define CONFIG_MMC + +#ifdef CONFIG_MMC +#define CONFIG_FSL_ESDHC +#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR +#define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT +#define CONFIG_CMD_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_DOS_PARTITION +#endif + +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_CMDLINE_EDITING /* Command-line editing */ +#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ +#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ +#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ +#ifdef CONFIG_CMD_KGDB +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ +#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks*/ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 64 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial map for Linux*/ +#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ + +#ifdef CONFIG_CMD_KGDB +#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif + +/* + * Environment Configuration + */ +#define CONFIG_ROOTPATH "/opt/nfsroot" +#define CONFIG_BOOTFILE "uImage" +#define CONFIG_UBOOTPATH "u-boot.bin" /* U-Boot image on TFTP server*/ + +/* default location for tftp and bootm */ +#define CONFIG_LOADADDR 1000000 + +#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ + +#define CONFIG_BAUDRATE 115200 + +#define __USB_PHY_TYPE utmi + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "hwconfig=fsl_ddr:ctlr_intlv=3way_4KB," \ + "bank_intlv=auto;" \ + "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\ + "netdev=eth0\0" \ + "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ + "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ + "tftpflash=tftpboot $loadaddr $uboot && " \ + "protect off $ubootaddr +$filesize && " \ + "erase $ubootaddr +$filesize && " \ + "cp.b $loadaddr $ubootaddr $filesize && " \ + "protect on $ubootaddr +$filesize && " \ + "cmp.b $loadaddr $ubootaddr $filesize\0" \ + "consoledev=ttyS0\0" \ + "ramdiskaddr=2000000\0" \ + "ramdiskfile=t4240qds/ramdisk.uboot\0" \ + "fdtaddr=c00000\0" \ + "fdtfile=t4240qds/t4240qds.dtb\0" \ + "bdev=sda3\0" \ + "c=ffe\0" + +/* For emulation this causes u-boot to jump to the start of the proof point + app code automatically */ +#define CONFIG_PROOF_POINTS \ + "setenv bootargs root=/dev/$bdev rw " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "cpu 1 release 0x29000000 - - -;" \ + "cpu 2 release 0x29000000 - - -;" \ + "cpu 3 release 0x29000000 - - -;" \ + "cpu 4 release 0x29000000 - - -;" \ + "cpu 5 release 0x29000000 - - -;" \ + "cpu 6 release 0x29000000 - - -;" \ + "cpu 7 release 0x29000000 - - -;" \ + "go 0x29000000" + +#define CONFIG_HVBOOT \ + "setenv bootargs config-addr=0x60000000; " \ + "bootm 0x01000000 - 0x00f00000" + +#define CONFIG_ALU \ + "setenv bootargs root=/dev/$bdev rw " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "cpu 1 release 0x01000000 - - -;" \ + "cpu 2 release 0x01000000 - - -;" \ + "cpu 3 release 0x01000000 - - -;" \ + "cpu 4 release 0x01000000 - - -;" \ + "cpu 5 release 0x01000000 - - -;" \ + "cpu 6 release 0x01000000 - - -;" \ + "cpu 7 release 0x01000000 - - -;" \ + "go 0x01000000" + +#define CONFIG_LINUX \ + "setenv bootargs root=/dev/ram rw " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "setenv ramdiskaddr 0x02000000;" \ + "setenv fdtaddr 0x00c00000;" \ + "setenv loadaddr 0x1000000;" \ + "bootm $loadaddr $ramdiskaddr $fdtaddr" + +#define CONFIG_HDBOOT \ + "setenv bootargs root=/dev/$bdev rw " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr - $fdtaddr" + +#define CONFIG_NFSBOOTCOMMAND \ + "setenv bootargs root=/dev/nfs rw " \ + "nfsroot=$serverip:$rootpath " \ + "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr - $fdtaddr" + +#define CONFIG_RAMBOOTCOMMAND \ + "setenv bootargs root=/dev/ram rw " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $ramdiskaddr $ramdiskfile;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr $ramdiskaddr $fdtaddr" + +#define CONFIG_BOOTCOMMAND CONFIG_LINUX + +#ifdef CONFIG_SECURE_BOOT +#include <asm/fsl_secure_boot.h> +#endif + +#endif /* __CONFIG_H */ diff --git a/include/e500.h b/include/e500.h index e1708b9..0ff8e89 100644 --- a/include/e500.h +++ b/include/e500.h @@ -18,6 +18,9 @@ typedef struct #ifdef CONFIG_SYS_DPAA_FMAN unsigned long freqFMan[CONFIG_SYS_NUM_FMAN]; #endif +#ifdef CONFIG_SYS_DPAA_QBMAN + unsigned long freqQMAN; +#endif #ifdef CONFIG_SYS_DPAA_PME unsigned long freqPME; #endif diff --git a/include/fm_eth.h b/include/fm_eth.h index e56541d..495765b 100644 --- a/include/fm_eth.h +++ b/include/fm_eth.h @@ -1,5 +1,5 @@ /* - * Copyright 2009-2011 Freescale Semiconductor, Inc. + * Copyright 2009-2012 Freescale Semiconductor, Inc. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as @@ -30,13 +30,21 @@ enum fm_port { FM1_DTSEC3, FM1_DTSEC4, FM1_DTSEC5, + FM1_DTSEC6, + FM1_DTSEC9, + FM1_DTSEC10, FM1_10GEC1, + FM1_10GEC2, FM2_DTSEC1, FM2_DTSEC2, FM2_DTSEC3, FM2_DTSEC4, FM2_DTSEC5, + FM2_DTSEC6, + FM2_DTSEC9, + FM2_DTSEC10, FM2_10GEC1, + FM2_10GEC2, NUM_FM_PORTS, }; @@ -45,8 +53,15 @@ enum fm_eth_type { FM_ETH_10G_E, }; +#ifdef CONFIG_SYS_FMAN_V3 +#define CONFIG_SYS_FM1_DTSEC_MDIO_ADDR (CONFIG_SYS_FSL_FM1_ADDR + 0xfc000) +#define CONFIG_SYS_FM1_TGEC_MDIO_ADDR (CONFIG_SYS_FSL_FM1_ADDR + 0xfd000) +#define CONFIG_SYS_FM2_DTSEC_MDIO_ADDR (CONFIG_SYS_FSL_FM2_ADDR + 0xfc000) +#define CONFIG_SYS_FM2_TGEC_MDIO_ADDR (CONFIG_SYS_FSL_FM2_ADDR + 0xfd000) +#else #define CONFIG_SYS_FM1_DTSEC1_MDIO_ADDR (CONFIG_SYS_FSL_FM1_ADDR + 0xe1120) #define CONFIG_SYS_FM1_TGEC_MDIO_ADDR (CONFIG_SYS_FSL_FM1_ADDR + 0xf1000) +#endif #define DEFAULT_FM_MDIO_NAME "FSL_MDIO0" #define DEFAULT_FM_TGEC_MDIO_NAME "FM_TGEC_MDIO" @@ -57,6 +72,33 @@ enum fm_eth_type { .phy_regs = (void *)pregs, \ .enet_if = PHY_INTERFACE_MODE_NONE, \ +#ifdef CONFIG_SYS_FMAN_V3 +#define FM_DTSEC_INFO_INITIALIZER(idx, n) \ +{ \ + FM_ETH_INFO_INITIALIZER(idx, CONFIG_SYS_FM1_DTSEC_MDIO_ADDR) \ + .index = idx, \ + .num = n - 1, \ + .type = FM_ETH_1G_E, \ + .port = FM##idx##_DTSEC##n, \ + .rx_port_id = RX_PORT_1G_BASE + n - 1, \ + .tx_port_id = TX_PORT_1G_BASE + n - 1, \ + .compat_offset = CONFIG_SYS_FSL_FM##idx##_OFFSET + \ + offsetof(struct ccsr_fman, memac[n-1]),\ +} + +#define FM_TGEC_INFO_INITIALIZER(idx, n) \ +{ \ + FM_ETH_INFO_INITIALIZER(idx, CONFIG_SYS_FM1_TGEC_MDIO_ADDR) \ + .index = idx, \ + .num = n - 1, \ + .type = FM_ETH_10G_E, \ + .port = FM##idx##_10GEC##n, \ + .rx_port_id = RX_PORT_10G_BASE + n - 1, \ + .tx_port_id = TX_PORT_10G_BASE + n - 1, \ + .compat_offset = CONFIG_SYS_FSL_FM##idx##_OFFSET + \ + offsetof(struct ccsr_fman, memac[n-1]),\ +} +#else #define FM_DTSEC_INFO_INITIALIZER(idx, n) \ { \ FM_ETH_INFO_INITIALIZER(idx, CONFIG_SYS_FM1_DTSEC1_MDIO_ADDR) \ @@ -82,7 +124,7 @@ enum fm_eth_type { .compat_offset = CONFIG_SYS_FSL_FM##idx##_OFFSET + \ offsetof(struct ccsr_fman, mac_10g[n-1]),\ } - +#endif struct fm_eth_info { u8 enabled; u8 fm; @@ -104,7 +146,14 @@ struct tgec_mdio_info { char *name; }; +struct memac_mdio_info { + struct memac_mdio_controller *regs; + char *name; +}; + int fm_tgec_mdio_init(bd_t *bis, struct tgec_mdio_info *info); +int fm_memac_mdio_init(bd_t *bis, struct memac_mdio_info *info); + int fm_standard_init(bd_t *bis); void fman_enet_init(void); void fdt_fixup_fman_ethernet(void *fdt); diff --git a/include/fsl_mdio.h b/include/fsl_mdio.h index ea8b54b..e24e828 100644 --- a/include/fsl_mdio.h +++ b/include/fsl_mdio.h @@ -1,5 +1,5 @@ /* - * Copyright 2009-2010 Freescale Semiconductor, Inc. + * Copyright 2009-2012 Freescale Semiconductor, Inc. * Jun-jie Zhang <b18070@freescale.com> * Mingkai Hu <Mingkai.hu@freescale.com> * @@ -51,6 +51,10 @@ int tsec_local_mdio_read(struct tsec_mii_mng *phyregs, int port_addr, int tsec_phy_read(struct mii_dev *bus, int addr, int dev_addr, int regnum); int tsec_phy_write(struct mii_dev *bus, int addr, int dev_addr, int regnum, u16 value); +int memac_mdio_write(struct mii_dev *bus, int port_addr, int dev_addr, + int regnum, u16 value); +int memac_mdio_read(struct mii_dev *bus, int port_addr, int dev_addr, + int regnum); struct fsl_pq_mdio_info { struct tsec_mii_mng *regs; |