integrator: break out common config

The configuration that is common for all Integrator boards may
just as well be stored in a common include file as per pattern
from other boards. This eases maintenance quite a bit.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

3 files changed, 111 insertions, 156 deletions

diff --git a/include/configs/integrator-common.h b/include/configs/integrator-common.h
new file mode 100644
index 0000000..564b418
--- /dev/null
+++ b/include/configs/integrator-common.h
@@ -0,0 +1,103 @@
+/*
+ * (C) Copyright 2012
+ * Linaro
+ * Linus Walleij <linus.walleij@linaro.org>
+ * Common ARM Integrator configuration settings
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#define CONFIG_INTEGRATOR
+
+#define CONFIG_SYS_TEXT_BASE		0x01000000
+#define CONFIG_SYS_MEMTEST_START	0x100000
+#define CONFIG_SYS_MEMTEST_END		0x10000000
+#define CONFIG_SYS_HZ			1000
+#define CONFIG_SYS_TIMERBASE		0x13000100	/* Timer1 */
+#define CONFIG_SYS_LOAD_ADDR		0x7fc0	/* default load address */
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size*/
+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
+#define CONFIG_SYS_MAXARGS		16	/* max number of command args */
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size*/
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 128*1024) /* Size of malloc() pool */
+
+#define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs  */
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_MISC_INIT_R		/* call misc_init_r during start up */
+
+/*
+ * There are various dependencies on the core module (CM) fitted
+ * Users should refer to their CM user guide
+ */
+#include "armcoremodule.h"
+
+/*
+ * Initialize and remap the core module, use SPD to detect memory size
+ * If CONFIG_SKIP_LOWLEVEL_INIT is not defined &
+ * the core module has a CM_INIT register
+ * then the U-Boot initialisation code will
+ * e.g. ARM Boot Monitor or pre-loader is repeated once
+ * (to re-initialise any existing CM_INIT settings to safe values).
+ *
+ * This is usually not the desired behaviour since the platform
+ * will either reboot into the ARM monitor (or pre-loader)
+ * or continuously cycle thru it without U-Boot running,
+ * depending upon the setting of Integrator/CP switch S2-4.
+ *
+ * However it may be needed if Integrator/CP switch S2-1
+ * is set OFF to boot direct into U-Boot.
+ * In that case comment out the line below.
+ */
+#define CONFIG_CM_INIT
+#define CONFIG_CM_REMAP
+#define CONFIG_CM_SPD_DETECT
+
+/*
+ * The ARM boot monitor initializes the board.
+ * However, the default U-Boot code also performs the initialization.
+ * If desired, this can be prevented by defining SKIP_LOWLEVEL_INIT
+ * - see documentation supplied with board for details of how to choose the
+ * image to run at reset/power up
+ * e.g. whether the ARM Boot Monitor runs before U-Boot
+ */
+/* #define CONFIG_SKIP_LOWLEVEL_INIT */
+
+/*
+ * The ARM boot monitor does not relocate U-Boot.
+ * However, the default U-Boot code performs the relocation check,
+ * and may relocate the code if the memory map is changed.
+ * If necessary this can be prevented by defining SKIP_RELOCATE_UBOOT
+ */
+/* #define SKIP_CONFIG_RELOCATE_UBOOT */
+
+
+/*
+ * Physical Memory Map
+ */
+#define CONFIG_NR_DRAM_BANKS	1		/* we have 1 bank of DRAM */
+#define PHYS_SDRAM_1		0x00000000	/* SDRAM Bank #1 */
+#define PHYS_SDRAM_1_SIZE	0x08000000	/* 128 MB */
+#define CONFIG_SYS_SDRAM_BASE	PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_RAM_SIZE PHYS_SDRAM_1_SIZE
+#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_SDRAM_BASE + \
+				    CONFIG_SYS_INIT_RAM_SIZE - \
+				    GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_GBL_DATA_OFFSET
diff --git a/include/configs/integratorap.h b/include/configs/integratorap.h
index 2770c82..c6907b5 100644
--- a/include/configs/integratorap.h
+++ b/include/configs/integratorap.h
@@ -31,32 +31,11 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#define CONFIG_INTEGRATOR
+#include "integrator-common.h"
+
+/* Integrator/AP-specific configuration */
 #define CONFIG_ARCH_INTEGRATOR
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_SYS_TEXT_BASE		0x01000000
-#define CONFIG_SYS_MEMTEST_START	0x100000
-#define CONFIG_SYS_MEMTEST_END		0x10000000
-#define CONFIG_SYS_HZ			1000
 #define CONFIG_SYS_HZ_CLOCK		24000000	/* Timer 1 is clocked at 24Mhz */
-#define CONFIG_SYS_TIMERBASE		0x13000100	/* Timer1		       */
-
-#define CONFIG_CMDLINE_TAG	1	/* enable passing of ATAGs  */
-#define CONFIG_SETUP_MEMORY_TAGS	1
-#define CONFIG_MISC_INIT_R	1	/* call misc_init_r during start up */
-
-#define CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_CM_INIT		1
-#define CONFIG_CM_REMAP		1
-#define CONFIG_CM_SPD_DETECT
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN	(CONFIG_ENV_SIZE + 128*1024)
 
 /*
  * PL010 Configuration
@@ -90,29 +69,7 @@
 /*
  * Miscellaneous configurable options
  */
-#define CONFIG_SYS_LONGHELP	/* undef to save memory	    */
-#define CONFIG_SYS_HUSH_PARSER
 #define CONFIG_SYS_PROMPT	"Integrator-AP # "	/* Monitor Command Prompt   */
-#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size  */
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
-#define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
-
-#define CONFIG_SYS_LOAD_ADDR	0x7fc0	/* default load address */
-
-/*-----------------------------------------------------------------------
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS	1	/* we have 1 bank of DRAM */
-#define PHYS_SDRAM_1		0x00000000	/* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE	0x02000000	/* 32 MB */
-#define CONFIG_SYS_SDRAM_BASE	PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_RAM_SIZE PHYS_SDRAM_1_SIZE
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_SDRAM_BASE + \
-				    CONFIG_SYS_INIT_RAM_SIZE - \
-				    GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_GBL_DATA_OFFSET
 
 #define CONFIG_SYS_FLASH_BASE	0x24000000
 
diff --git a/include/configs/integratorcp.h b/include/configs/integratorcp.h
index d5043df..ca02a6f 100644
--- a/include/configs/integratorcp.h
+++ b/include/configs/integratorcp.h
@@ -31,32 +31,11 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-/* Integrator-specific configuration */
-#define CONFIG_INTEGRATOR
-#define CONFIG_ARCH_CINTEGRATOR
-#define CONFIG_CM_INIT
-#define CONFIG_CM_REMAP
-#define CONFIG_CM_SPD_DETECT
+#include "integrator-common.h"
 
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_SYS_TEXT_BASE		0x01000000
-#define CONFIG_SYS_MEMTEST_START	0x100000
-#define CONFIG_SYS_MEMTEST_END		0x10000000
-#define CONFIG_SYS_HZ			1000
+/* Integrator CP-specific configuration */
+#define CONFIG_ARCH_CINTEGRATOR
 #define CONFIG_SYS_HZ_CLOCK		1000000	/* Timer 1 is clocked at 1Mhz */
-#define CONFIG_SYS_TIMERBASE		0x13000100
-
-#define CONFIG_CMDLINE_TAG		1	/* enable passing of ATAGs  */
-#define CONFIG_SETUP_MEMORY_TAGS	1
-#define CONFIG_MISC_INIT_R		1	/* call misc_init_r during start up */
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 128*1024)
 
 /*
  * Hardware drivers
@@ -66,9 +45,7 @@
 #define CONFIG_SMC91111_BASE    0xC8000000
 #undef CONFIG_SMC91111_EXT_PHY
 
-/*
- * NS16550 Configuration
- */
+/* PL011 configuration */
 #define CONFIG_PL011_SERIAL
 #define CONFIG_PL011_CLOCK	14745600
 #define CONFIG_PL01x_PORTS	{ (void *)CONFIG_SYS_SERIAL0, (void *)CONFIG_SYS_SERIAL1 }
@@ -77,16 +54,6 @@
 #define CONFIG_SYS_SERIAL0		0x16000000
 #define CONFIG_SYS_SERIAL1		0x17000000
 
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
 /*
  * Command line configuration.
  */
@@ -102,32 +69,10 @@
 /*
  * Miscellaneous configurable options
  */
-#define CONFIG_SYS_LONGHELP				/* undef to save memory */
 #define CONFIG_SYS_PROMPT	"Integrator-CP # "	/* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE	256			/* Console I/O Buffer Size*/
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
-#define CONFIG_SYS_MAXARGS	16			/* max number of command args */
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE		/* Boot Argument Buffer Size*/
 
-#define CONFIG_SYS_LOAD_ADDR	0x7fc0	/* default load address */
-
-/*-----------------------------------------------------------------------
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS	1		/* we have 1 bank of DRAM */
-#define PHYS_SDRAM_1		0x00000000	/* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE	0x08000000	/* 128 MB */
-#define CONFIG_SYS_SDRAM_BASE	PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_RAM_SIZE PHYS_SDRAM_1_SIZE
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_SDRAM_BASE + \
-				    CONFIG_SYS_INIT_RAM_SIZE - \
-				    GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_GBL_DATA_OFFSET
-
-/*-----------------------------------------------------------------------
+/*
  * FLASH and environment organization
-
  * Top varies according to amount fitted
  * Reserve top 4 blocks of flash
  * - ARM Boot Monitor
@@ -136,7 +81,6 @@
  * - U-Boot environment
  *
  * Base is always 0x24000000
-
  */
 #define CONFIG_SYS_FLASH_BASE		0x24000000
 #define CONFIG_SYS_FLASH_CFI		1
@@ -178,53 +122,4 @@
 #define CONFIG_ENV_SECT_SIZE	0x40000		/* 256KB */
 #define CONFIG_ENV_SIZE		8192		/* 8KB */
 
-/*
- * The ARM boot monitor initializes the board.
- * However, the default U-Boot code also performs the initialization.
- * If desired, this can be prevented by defining SKIP_LOWLEVEL_INIT
- * - see documentation supplied with board for details of how to choose the
- * image to run at reset/power up
- * e.g. whether the ARM Boot Monitor runs before U-Boot
-
-#define CONFIG_SKIP_LOWLEVEL_INIT
-
- */
-
-/*
- * The ARM boot monitor does not relocate U-Boot.
- * However, the default U-Boot code performs the relocation check,
- * and may relocate the code if the memory map is changed.
- * If necessary this can be prevented by defining SKIP_RELOCATE_UBOOT
-
-#define SKIP_CONFIG_RELOCATE_UBOOT
-
- */
-/*-----------------------------------------------------------------------
- * There are various dependencies on the core module (CM) fitted
- * Users should refer to their CM user guide
- * - when porting adjust u-boot/Makefile accordingly
- * to define the necessary CONFIG_ s for the CM involved
- * see e.g. cp_926ejs_config
- */
-
-#include "armcoremodule.h"
-
-/*
- * If CONFIG_SKIP_LOWLEVEL_INIT is not defined &
- * the core module has a CM_INIT register
- * then the U-Boot initialisation code will
- * e.g. ARM Boot Monitor or pre-loader is repeated once
- * (to re-initialise any existing CM_INIT settings to safe values).
- *
- * This is usually not the desired behaviour since the platform
- * will either reboot into the ARM monitor (or pre-loader)
- * or continuously cycle thru it without U-Boot running,
- * depending upon the setting of Integrator/CP switch S2-4.
- *
- * However it may be needed if Integrator/CP switch S2-1
- * is set OFF to boot direct into U-Boot.
- * In that case comment out the line below.
-#undef	CONFIG_CM_INIT
- */
-
 #endif /* __CONFIG_H */