board: ls1012a: LS1012A-2G5RDB board support

LS1012A-2G5RDB belongs to LS1012A family with features
2 2.5G SGMII PFE MAC, SATA, USB 2.0/3.0, WiFi
DDR, eMMC, QuadSPI, UART

Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com>

10 files changed, 293 insertions, 2 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 91ad5e8..d77bc6e 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -918,6 +918,18 @@ config TARGET_LS1012ARDB
 	  development platform that supports the QorIQ LS1012A
 	  Layerscape Architecture processor.
 
+config TARGET_LS1012A2G5RDB
+	bool "Support ls1012a2g5rdb"
+	select ARCH_LS1012A
+	select ARM64
+	select BOARD_LATE_INIT
+	imply SCSI
+	help
+	  Support for Freescale LS1012A2G5RDB platform.
+	  The LS1012A 2G5 Reference design board (RDB) is a high-performance
+	  development platform that supports the QorIQ LS1012A
+	  Layerscape Architecture processor.
+
 config TARGET_LS1012AFRDM
 	bool "Support ls1012afrdm"
 	select ARCH_LS1012A
diff --git a/arch/arm/cpu/armv8/Kconfig b/arch/arm/cpu/armv8/Kconfig
index 51f48e1..3a0e129 100644
--- a/arch/arm/cpu/armv8/Kconfig
+++ b/arch/arm/cpu/armv8/Kconfig
@@ -90,7 +90,7 @@ config PSCI_RESET
 		   !TARGET_LS2080ARDB && !TARGET_LS2080A_EMU && \
 		   !TARGET_LS1088ARDB && !TARGET_LS1088AQDS && \
 		   !TARGET_LS1012ARDB && !TARGET_LS1012AFRDM && \
-		   !TARGET_LS1012AQDS && \
+		   !TARGET_LS1012A2G5RDB && !TARGET_LS1012AQDS && \
 		   !TARGET_LS1043ARDB && !TARGET_LS1043AQDS && \
 		   !TARGET_LS1046ARDB && !TARGET_LS1046AQDS && \
 		   !TARGET_LS2081ARDB && \
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 6db64f91..9e49b7d 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -200,6 +200,7 @@ dtb-$(CONFIG_FSL_LSCH2) += fsl-ls1043a-qds-duart.dtb \
 	fsl-ls1046a-rdb.dtb \
 	fsl-ls1012a-qds.dtb \
 	fsl-ls1012a-rdb.dtb \
+	fsl-ls1012a-2g5rdb.dtb \
 	fsl-ls1012a-frdm.dtb
 
 dtb-$(CONFIG_ARCH_SNAPDRAGON) += dragonboard410c.dtb
diff --git a/arch/arm/dts/fsl-ls1012a-2g5rdb.dts b/arch/arm/dts/fsl-ls1012a-2g5rdb.dts
new file mode 100644
index 0000000..dbe01dd
--- /dev/null
+++ b/arch/arm/dts/fsl-ls1012a-2g5rdb.dts
@@ -0,0 +1,43 @@
+/*
+ * NXP ls1012a 2G5RDB board device tree source
+ *
+ * Copyright 2017 NXP
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+/dts-v1/;
+#include "fsl-ls1012a.dtsi"
+
+/ {
+	model = "LS1012A 2G5RDB Board";
+
+	aliases {
+		spi0 = &qspi;
+	};
+
+	chosen {
+		stdout-path = &duart0;
+	};
+};
+
+&qspi {
+	bus-num = <0>;
+	status = "okay";
+
+	qflash0: s25fl128s@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spi-flash";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&duart0 {
+	status = "okay";
+};
diff --git a/board/freescale/ls1012ardb/Kconfig b/board/freescale/ls1012ardb/Kconfig
index 98231f9..d13b08e 100644
--- a/board/freescale/ls1012ardb/Kconfig
+++ b/board/freescale/ls1012ardb/Kconfig
@@ -15,3 +15,21 @@ config SYS_CONFIG_NAME
 source "board/freescale/common/Kconfig"
 
 endif
+
+if TARGET_LS1012A2G5RDB
+
+config SYS_BOARD
+        default "ls1012ardb"
+
+config SYS_VENDOR
+        default "freescale"
+
+config SYS_SOC
+        default "fsl-layerscape"
+
+config SYS_CONFIG_NAME
+        default "ls1012a2g5rdb"
+
+source "board/freescale/common/Kconfig"
+
+endif
diff --git a/board/freescale/ls1012ardb/MAINTAINERS b/board/freescale/ls1012ardb/MAINTAINERS
index 2cb38e7..a0a0d8d 100644
--- a/board/freescale/ls1012ardb/MAINTAINERS
+++ b/board/freescale/ls1012ardb/MAINTAINERS
@@ -8,3 +8,10 @@ F:	configs/ls1012ardb_qspi_defconfig
 M:	Sumit Garg <sumit.garg@nxp.com>
 S:	Maintained
 F:	configs/ls1012ardb_qspi_SECURE_BOOT_defconfig
+
+LS1012A2G5RDB BOARD
+M:      Bhaskar Upadhaya <bhaskar.upadhaya@nxp.com>
+S:      Maintained
+F:      board/freescale/ls1012ardb/
+F:      include/configs/ls1012a2g5rdb.h
+F:      configs/ls1012a2g5rdb_qspi_defconfig
diff --git a/board/freescale/ls1012ardb/README b/board/freescale/ls1012ardb/README
index 453b432..572fd8c 100644
--- a/board/freescale/ls1012ardb/README
+++ b/board/freescale/ls1012ardb/README
@@ -52,3 +52,46 @@ U-boot 		| 1MB	| 0x4010_0000
 U-boot Env 	| 1MB	| 0x4020_0000
 PPA FIT image	| 2MB	| 0x4050_0000
 Linux ITB	| ~53MB | 0x40A0_0000
+
+LS1012A2G5RDB board Overview
+-----------------------
+ - SERDES Connections, 3 lanes supporting:
+      - SGMII, SGMII 2.5
+      - SATA 3.0
+ - DDR Controller
+     - 16-bit, 1 GB DDR3L SDRAM memory, running at data rates up to 1 GT/s
+ -QSPI: A dual 1:3 switch, NX3L4357GM,115 (U35) drives the QSPI chip-select
+ signals to
+    - QSPI NOR flash memory
+ - USB 3.0
+    - one high-speed USB 2.0/3.0 port.
+ - SDIO WiFi, SPI
+ - 2 I2C controllers
+ - One SATA onboard connectors
+ - UART
+   - The LS1012A processor consists of two UART controllers,
+   out of which only UART1 is used on 2G5RDB.
+ - ARM JTAG support
+
+Major Difference between LS1012ARDB and LS1012A-2G5RDB
+------------------------------------------------------
+1. LS1012A-2G5RDB has Type C USB connector unlike USB Type A/B of LS1012ARDB
+2. LS1012A-2G5RDB has 2 2.5G AQR PHY unlike 2 1G Realtek RTL8211FS PHYs
+   of LS1012ARDB
+3. LS1012A-2G5RDB is not having Arduino header
+4. LS1012A-2G5RDB doesn't have PCI slot
+
+Booting Options
+---------------
+QSPI Flash
+
+QSPI flash map
+--------------
+Images		| Size	|QSPI Flash Address
+------------------------------------------
+RCW + PBI	| 1MB	| 0x4000_0000
+U-boot 		| 1MB	| 0x4010_0000
+U-boot Env 	| 1MB	| 0x4030_0000
+PPA FIT image	| 2MB	| 0x4040_0000
+PFE firmware	| 20K	| 0x00a0_0000
+Linux ITB	| ~53MB | 0x4100_0000
diff --git a/board/freescale/ls1012ardb/ls1012ardb.c b/board/freescale/ls1012ardb/ls1012ardb.c
index 286f9d8..c9557bb 100644
--- a/board/freescale/ls1012ardb/ls1012ardb.c
+++ b/board/freescale/ls1012ardb/ls1012ardb.c
@@ -28,6 +28,7 @@ DECLARE_GLOBAL_DATA_PTR;
 
 int checkboard(void)
 {
+#ifdef CONFIG_TARGET_LS1012ARDB
 	u8 in1;
 
 	puts("Board: LS1012ARDB ");
@@ -77,7 +78,10 @@ int checkboard(void)
 		puts(": bank2\n");
 	else
 		puts("unknown\n");
+#else
 
+	puts("Board: LS1012A2G5RDB ");
+#endif
 	return 0;
 }
 
@@ -150,6 +154,7 @@ int board_init(void)
 	return 0;
 }
 
+#ifdef CONFIG_TARGET_LS1012ARDB
 int esdhc_status_fixup(void *blob, const char *compat)
 {
 	char esdhc1_path[] = "/soc/esdhc@1580000";
@@ -193,7 +198,6 @@ int esdhc_status_fixup(void *blob, const char *compat)
 		if (mux_sdhc2 == 2 || mux_sdhc2 == 0)
 			sdhc2_en = true;
 	}
-
 	if (sdhc2_en)
 		do_fixup_by_path(blob, esdhc1_path, "status", "okay",
 				 sizeof("okay"), 1);
@@ -202,6 +206,7 @@ int esdhc_status_fixup(void *blob, const char *compat)
 				 sizeof("disabled"), 1);
 	return 0;
 }
+#endif
 
 int ft_board_setup(void *blob, bd_t *bd)
 {
diff --git a/configs/ls1012a2g5rdb_qspi_defconfig b/configs/ls1012a2g5rdb_qspi_defconfig
new file mode 100644
index 0000000..140a4e1
--- /dev/null
+++ b/configs/ls1012a2g5rdb_qspi_defconfig
@@ -0,0 +1,40 @@
+CONFIG_ARM=y
+CONFIG_TARGET_LS1012A2G5RDB=y
+CONFIG_FSL_LS_PPA=y
+CONFIG_QSPI_AHB_INIT=y
+CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1012a-2g5rdb"
+CONFIG_DISTRO_DEFAULTS=y
+# CONFIG_SYS_MALLOC_F is not set
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_SYS_EXTRA_OPTIONS="QSPI_BOOT"
+CONFIG_QSPI_BOOT=y
+CONFIG_BOOTDELAY=10
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 quiet lpj=250000"
+# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_CMD_GREPENV=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_USB=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_CACHE=y
+CONFIG_OF_CONTROL=y
+CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_DM=y
+# CONFIG_BLK is not set
+CONFIG_DM_MMC=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH=y
+CONFIG_NETDEVICES=y
+CONFIG_SYS_NS16550=y
+CONFIG_DM_SPI=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_STORAGE=y
diff --git a/include/configs/ls1012a2g5rdb.h b/include/configs/ls1012a2g5rdb.h
new file mode 100644
index 0000000..25df103
--- /dev/null
+++ b/include/configs/ls1012a2g5rdb.h
@@ -0,0 +1,122 @@
+/*
+ * Copyright 2017 NXP
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __LS1012A2G5RDB_H__
+#define __LS1012A2G5RDB_H__
+
+#include "ls1012a_common.h"
+
+/* PFE Ethernet */
+#ifdef CONFIG_FSL_PFE
+#define EMAC1_PHY_ADDR          0x2
+#define EMAC2_PHY_ADDR          0x1
+#define CONFIG_PHYLIB
+#define CONFIG_PHYLIB_10G
+#define CONFIG_PHY_AQUANTIA
+#endif
+
+/* DDR */
+#define CONFIG_DIMM_SLOTS_PER_CTLR	1
+#define CONFIG_CHIP_SELECTS_PER_CTRL	1
+#define CONFIG_NR_DRAM_BANKS		2
+#define CONFIG_SYS_SDRAM_SIZE		0x40000000
+#define CONFIG_CMD_MEMINFO
+#define CONFIG_CMD_MEMTEST
+#define CONFIG_SYS_MEMTEST_START	0x80000000
+#define CONFIG_SYS_MEMTEST_END		0x9fffffff
+
+/*  MMC  */
+#ifdef CONFIG_MMC
+#define CONFIG_FSL_ESDHC
+#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
+#endif
+
+/* SATA */
+#define CONFIG_LIBATA
+#define CONFIG_SCSI_AHCI
+#define CONFIG_SCSI_AHCI_PLAT
+
+#define CONFIG_SYS_SATA				AHCI_BASE_ADDR
+
+#define CONFIG_SYS_SCSI_MAX_SCSI_ID		1
+#define CONFIG_SYS_SCSI_MAX_LUN			1
+#define CONFIG_SYS_SCSI_MAX_DEVICE		(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
+						CONFIG_SYS_SCSI_MAX_LUN)
+#define CONFIG_NET_MULTI
+
+#define CONFIG_CMD_MEMINFO
+#define CONFIG_CMD_MEMTEST
+#define CONFIG_SYS_MEMTEST_START	0x80000000
+#define CONFIG_SYS_MEMTEST_END		0x9fffffff
+
+#undef CONFIG_EXTRA_ENV_SETTINGS
+#define CONFIG_EXTRA_ENV_SETTINGS		\
+	"verify=no\0"				\
+	"fdt_high=0xffffffffffffffff\0"		\
+	"initrd_high=0xffffffffffffffff\0"	\
+	"fdt_addr=0x00f00000\0"			\
+	"kernel_addr=0x01000000\0"		\
+	"kernelheader_addr=0x800000\0"		\
+	"scriptaddr=0x80000000\0"		\
+	"scripthdraddr=0x80080000\0"		\
+	"fdtheader_addr_r=0x80100000\0"		\
+	"kernelheader_addr_r=0x80200000\0"	\
+	"kernel_addr_r=0x81000000\0"		\
+	"fdt_addr_r=0x90000000\0"		\
+	"load_addr=0xa0000000\0"		\
+	"kernel_size=0x2800000\0"		\
+	"kernelheader_size=0x40000\0"		\
+	"console=ttyS0,115200\0"		\
+	BOOTENV					\
+	"boot_scripts=ls1012ardb_boot.scr\0"	\
+	"boot_script_hdr=hdr_ls1012ardb_bs.out\0"	\
+	"scan_dev_for_boot_part="		\
+	     "part list ${devtype} ${devnum} devplist; "	\
+	     "env exists devplist || setenv devplist 1; "	\
+	     "for distro_bootpart in ${devplist}; do "		\
+		  "if fstype ${devtype} "			\
+		      "${devnum}:${distro_bootpart} "		\
+		      "bootfstype; then "			\
+		      "run scan_dev_for_boot; "	\
+		  "fi; "			\
+	      "done\0"				\
+	"scan_dev_for_boot="				  \
+		"echo Scanning ${devtype} "		  \
+				"${devnum}:${distro_bootpart}...; "  \
+		"for prefix in ${boot_prefixes}; do "	  \
+			"run scan_dev_for_scripts; "	  \
+		"done;"					  \
+		"\0"					  \
+	"boot_a_script="				  \
+		"load ${devtype} ${devnum}:${distro_bootpart} "  \
+			"${scriptaddr} ${prefix}${script}; "    \
+		"env exists secureboot && load ${devtype} "     \
+			"${devnum}:${distro_bootpart} "		\
+			"${scripthdraddr} ${prefix}${boot_script_hdr} " \
+			"&& esbc_validate ${scripthdraddr};"    \
+		"source ${scriptaddr}\0"	  \
+	"installer=load mmc 0:2 $load_addr "	\
+		   "/flex_installer_arm64.itb; "	\
+		   "bootm $load_addr#$board\0"	\
+	"qspi_bootcmd=echo Trying load from qspi..;"	\
+		"sf probe && sf read $load_addr "	\
+		"$kernel_addr $kernel_size; env exists secureboot "	\
+		"&& sf read $kernelheader_addr_r $kernelheader_addr "	\
+		"$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
+		"bootm $load_addr#$board\0"
+
+#undef CONFIG_BOOTCOMMAND
+#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
+#define CONFIG_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; " \
+			   "env exists secureboot && esbc_halt;"
+#endif
+
+#define DEFAULT_PFE_MDIO_NAME "PFE_MDIO"
+#define DEFAULT_PFE_MDIO1_NAME "PFE_MDIO1"
+
+#include <asm/fsl_secure_boot.h>
+
+#endif /* __LS1012A2G5RDB_H__ */