armv8: ls1088a: SPL size reduction

Using changes in this patch we were able to reduce approx 8k
size of u-boot-spl.bin image. Following is breif description of
changes to reduce SPL size:
1. Changes in board/freescale/ls1088a/Makefile to remove
   compilation of eth.c and cpld.c in case of SPL build.
2. Changes in board/freescale/ls1088a/ls1088a.c to keep
   board_early_init_f funcations in case of SPL build.
3. Changes in ls1088a_common.h & ls1088ardb.h to remove driver
   specific macros due to which static data was being compiled in
   case of SPL build.

Signed-off-by: Sumit Garg <sumit.garg@nxp.com>
Signed-off-by: Vinitha V Pillai <vinitha.pillai@nxp.com>

4 files changed, 50 insertions, 7 deletions

diff --git a/board/freescale/ls1088a/Makefile b/board/freescale/ls1088a/Makefile
index bdcce9e..0e15031 100644
--- a/board/freescale/ls1088a/Makefile
+++ b/board/freescale/ls1088a/Makefile
@@ -5,6 +5,8 @@
 #
 
 obj-y += ls1088a.o
+obj-y += ddr.o
+ifndef CONFIG_SPL_BUILD
 obj-$(CONFIG_TARGET_LS1088ARDB) += eth_ls1088ardb.o
 obj-$(CONFIG_TARGET_LS1088AQDS) += eth_ls1088aqds.o
-obj-y += ddr.o
+endif
diff --git a/board/freescale/ls1088a/ls1088a.c b/board/freescale/ls1088a/ls1088a.c
index 96f183e..c0c425d 100644
--- a/board/freescale/ls1088a/ls1088a.c
+++ b/board/freescale/ls1088a/ls1088a.c
@@ -25,6 +25,13 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
+int board_early_init_f(void)
+{
+	fsl_lsch3_early_init_f();
+	return 0;
+}
+
+#if !defined(CONFIG_SPL_BUILD)
 unsigned long long get_qixis_addr(void)
 {
 	unsigned long long addr;
@@ -342,12 +349,6 @@ int board_init(void)
 	return 0;
 }
 
-int board_early_init_f(void)
-{
-	fsl_lsch3_early_init_f();
-	return 0;
-}
-
 void detail_board_ddr_info(void)
 {
 	puts("\nDDR    ");
@@ -451,3 +452,4 @@ int ft_board_setup(void *blob, bd_t *bd)
 	return 0;
 }
 #endif
+#endif /* defined(CONFIG_SPL_BUILD) */
diff --git a/include/configs/ls1088a_common.h b/include/configs/ls1088a_common.h
index b99257e..0ce65ae 100644
--- a/include/configs/ls1088a_common.h
+++ b/include/configs/ls1088a_common.h
@@ -7,6 +7,19 @@
 #ifndef __LS1088_COMMON_H
 #define __LS1088_COMMON_H
 
+/* SPL build */
+#ifdef CONFIG_SPL_BUILD
+#define SPL_NO_BOARDINFO
+#define SPL_NO_QIXIS
+#define SPL_NO_PCI
+#define SPL_NO_ENV
+#define SPL_NO_RTC
+#define SPL_NO_USB
+#define SPL_NO_SATA
+#define SPL_NO_QSPI
+#define SPL_NO_IFC
+#undef CONFIG_DISPLAY_CPUINFO
+#endif
 
 #define CONFIG_REMAKE_ELF
 #define CONFIG_FSL_LAYERSCAPE
@@ -74,8 +87,10 @@
 #define CONFIG_BAUDRATE			115200
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
+#ifndef SPL_NO_IFC
 /* IFC */
 #define CONFIG_FSL_IFC
+#endif
 
 /*
  * During booting, IFC is mapped at the region of 0x30000000.
@@ -174,6 +189,7 @@ unsigned long long get_qixis_addr(void);
 
 /* #define CONFIG_DISPLAY_CPUINFO */
 
+#ifndef SPL_NO_ENV
 /* Allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
 
@@ -213,6 +229,7 @@ unsigned long long get_qixis_addr(void);
 				" cp.b $kernel_start $kernel_load" \
 				" $kernel_size && bootm $kernel_load"
 #endif
+#endif
 
 /* Monitor Command Prompt */
 #define CONFIG_SYS_CBSIZE		512	/* Console I/O Buffer Size */
@@ -221,7 +238,9 @@ unsigned long long get_qixis_addr(void);
 #define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 #define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE /* Boot args buffer */
 #define CONFIG_SYS_LONGHELP
+#ifndef SPL_NO_ENV
 #define CONFIG_CMDLINE_EDITING		1
+#endif
 #define CONFIG_AUTO_COMPLETE
 #define CONFIG_SYS_MAXARGS		64	/* max command args */
 
diff --git a/include/configs/ls1088ardb.h b/include/configs/ls1088ardb.h
index 1438bec..3c6c666 100644
--- a/include/configs/ls1088ardb.h
+++ b/include/configs/ls1088ardb.h
@@ -9,7 +9,9 @@
 
 #include "ls1088a_common.h"
 
+#ifndef SPL_NO_BOARDINFO
 #define CONFIG_DISPLAY_BOARDINFO_LATE
+#endif
 
 #define CONFIG_MISC_INIT_R
 
@@ -29,7 +31,9 @@
 #endif
 
 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
+#ifndef CONFIG_SPL_BUILD
 #define CONFIG_QIXIS_I2C_ACCESS
+#endif
 #define SYS_NO_FLASH
 #undef CONFIG_CMD_IMLS
 #endif
@@ -97,7 +101,11 @@
 #define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE }
 #endif
 #endif
+
+#ifndef SPL_NO_IFC
 #define CONFIG_NAND_FSL_IFC
+#endif
+
 #define CONFIG_SYS_NAND_MAX_ECCPOS	256
 #define CONFIG_SYS_NAND_MAX_OOBFREE	2
 
@@ -139,7 +147,10 @@
 
 #define CONFIG_SYS_NAND_BLOCK_SIZE	(128 * 1024)
 
+#ifndef SPL_NO_QIXIS
 #define CONFIG_FSL_QIXIS
+#endif
+
 #define CONFIG_SYS_I2C_FPGA_ADDR	0x66
 #define QIXIS_LBMAP_SWITCH		2
 #define QIXIS_QMAP_MASK			0xe0
@@ -223,6 +234,8 @@
 #define I2C_RETIMER_ADDR		0x18
 #define I2C_MUX_CH_DEFAULT		0x8
 #define I2C_MUX_CH5			0xD
+
+#ifndef SPL_NO_RTC
 /*
 * RTC configuration
 */
@@ -230,6 +243,7 @@
 #define CONFIG_RTC_PCF8563 1
 #define CONFIG_SYS_I2C_RTC_ADDR         0x51  /* Channel 3*/
 #define CONFIG_CMD_DATE
+#endif
 
 /* EEPROM */
 #define CONFIG_ID_EEPROM
@@ -240,12 +254,14 @@
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	3
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	5
 
+#ifndef SPL_NO_QSPI
 /* QSPI device */
 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
 #define CONFIG_FSL_QSPI
 #define FSL_QSPI_FLASH_SIZE		(1 << 26)
 #define FSL_QSPI_FLASH_NUM		2
 #endif
+#endif
 
 #define CONFIG_CMD_MEMINFO
 #define CONFIG_CMD_MEMTEST
@@ -260,6 +276,7 @@
 
 #define CONFIG_FSL_MEMAC
 
+#ifndef SPL_NO_ENV
 /* Initial environment variables */
 #if defined(CONFIG_QSPI_BOOT)
 #define MC_INIT_CMD				\
@@ -408,6 +425,7 @@
 #define CONFIG_ETHPRIME		"DPMAC1@xgmii"
 #define CONFIG_PHY_GIGE
 #endif
+#endif
 
 /*  MMC  */
 #ifdef CONFIG_MMC
@@ -415,6 +433,7 @@
 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
 #endif
 
+#ifndef SPL_NO_ENV
 #undef CONFIG_CMDLINE_EDITING
 #include <config_distro_defaults.h>
 
@@ -423,6 +442,7 @@
 	func(SCSI, scsi, 0) \
 	func(DHCP, dhcp, na)
 #include <config_distro_bootcmd.h>
+#endif
 
 #include <asm/fsl_secure_boot.h>