Merge branch 'master' of git://git.denx.de/u-boot-x86

81 files changed, 662 insertions, 530 deletions

diff --git a/arch/x86/cpu/baytrail/valleyview.c b/arch/x86/cpu/baytrail/valleyview.c
index b312d9f..87ba849 100644
--- a/arch/x86/cpu/baytrail/valleyview.c
+++ b/arch/x86/cpu/baytrail/valleyview.c
@@ -12,8 +12,9 @@
 #include <asm/post.h>
 
 static struct pci_device_id mmc_supported[] = {
-	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_VALLEYVIEW_SDIO },
-	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_VALLEYVIEW_SDCARD },
+	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BYT_SDIO },
+	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BYT_SD },
+	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BYT_EMMC2 },
 	{},
 };
 
diff --git a/arch/x86/cpu/broadwell/sdram.c b/arch/x86/cpu/broadwell/sdram.c
index e7befde..74736cd 100644
--- a/arch/x86/cpu/broadwell/sdram.c
+++ b/arch/x86/cpu/broadwell/sdram.c
@@ -291,7 +291,6 @@ void board_debug_uart_init(void)
 
 static const struct udevice_id broadwell_syscon_ids[] = {
 	{ .compatible = "intel,me", .data = X86_SYSCON_ME },
-	{ .compatible = "intel,gma", .data = X86_SYSCON_GMA },
 	{ }
 };
 
diff --git a/arch/x86/cpu/coreboot/Kconfig b/arch/x86/cpu/coreboot/Kconfig
index e0e3c64..4b3601f 100644
--- a/arch/x86/cpu/coreboot/Kconfig
+++ b/arch/x86/cpu/coreboot/Kconfig
@@ -8,8 +8,4 @@ config CBMEM_CONSOLE
 	bool
 	default y
 
-config VIDEO_COREBOOT
-	bool
-	default y
-
 endif
diff --git a/arch/x86/cpu/cpu.c b/arch/x86/cpu/cpu.c
index 269043d..7c1d6de 100644
--- a/arch/x86/cpu/cpu.c
+++ b/arch/x86/cpu/cpu.c
@@ -135,7 +135,7 @@ static void load_gdt(const u64 *boot_gdt, u16 num_entries)
 	struct gdt_ptr gdt;
 
 	gdt.len = (num_entries * X86_GDT_ENTRY_SIZE) - 1;
-	gdt.ptr = (u32)boot_gdt;
+	gdt.ptr = (ulong)boot_gdt;
 
 	asm volatile("lgdtl %0\n" : : "m" (gdt));
 }
@@ -630,13 +630,11 @@ static void build_pagetable(uint32_t *pgtable)
 	memset(pgtable, '\0', PAGETABLE_SIZE);
 
 	/* Level 4 needs a single entry */
-	pgtable[0] = (uint32_t)&pgtable[1024] + 7;
+	pgtable[0] = (ulong)&pgtable[1024] + 7;
 
 	/* Level 3 has one 64-bit entry for each GiB of memory */
-	for (i = 0; i < 4; i++) {
-		pgtable[1024 + i * 2] = (uint32_t)&pgtable[2048] +
-							0x1000 * i + 7;
-	}
+	for (i = 0; i < 4; i++)
+		pgtable[1024 + i * 2] = (ulong)&pgtable[2048] + 0x1000 * i + 7;
 
 	/* Level 2 has 2048 64-bit entries, each repesenting 2MiB */
 	for (i = 0; i < 2048; i++)
diff --git a/arch/x86/cpu/interrupts.c b/arch/x86/cpu/interrupts.c
index dd2819a..5f6cdd3 100644
--- a/arch/x86/cpu/interrupts.c
+++ b/arch/x86/cpu/interrupts.c
@@ -182,8 +182,8 @@ static inline void load_idt(const struct desc_ptr *dtr)
 
 void set_vector(u8 intnum, void *routine)
 {
-	idt[intnum].base_high = (u16)((u32)(routine) >> 16);
-	idt[intnum].base_low = (u16)((u32)(routine) & 0xffff);
+	idt[intnum].base_high = (u16)((ulong)(routine) >> 16);
+	idt[intnum].base_low = (u16)((ulong)(routine) & 0xffff);
 }
 
 /*
@@ -238,8 +238,11 @@ int disable_interrupts(void)
 {
 	long flags;
 
+#ifdef CONFIG_X86_64
+	asm volatile ("pushfq ; popq %0 ; cli\n" : "=g" (flags) : );
+#else
 	asm volatile ("pushfl ; popl %0 ; cli\n" : "=g" (flags) : );
-
+#endif
 	return flags & X86_EFLAGS_IF;
 }
 
diff --git a/arch/x86/cpu/ivybridge/Makefile b/arch/x86/cpu/ivybridge/Makefile
index 9cdb07b..498e71a 100644
--- a/arch/x86/cpu/ivybridge/Makefile
+++ b/arch/x86/cpu/ivybridge/Makefile
@@ -9,7 +9,6 @@ obj-y += fsp_configs.o ivybridge.o
 else
 obj-y += cpu.o
 obj-y += early_me.o
-obj-y += gma.o
 obj-y += lpc.o
 obj-y += model_206ax.o
 obj-y += northbridge.o
diff --git a/arch/x86/cpu/ivybridge/bd82x6x.c b/arch/x86/cpu/ivybridge/bd82x6x.c
index 5b58d6c..e63ea6b 100644
--- a/arch/x86/cpu/ivybridge/bd82x6x.c
+++ b/arch/x86/cpu/ivybridge/bd82x6x.c
@@ -9,14 +9,12 @@
 #include <fdtdec.h>
 #include <malloc.h>
 #include <pch.h>
-#include <syscon.h>
 #include <asm/cpu.h>
 #include <asm/intel_regs.h>
 #include <asm/io.h>
 #include <asm/lapic.h>
 #include <asm/lpc_common.h>
 #include <asm/pci.h>
-#include <asm/arch/bd82x6x.h>
 #include <asm/arch/model_206ax.h>
 #include <asm/arch/pch.h>
 #include <asm/arch/sandybridge.h>
@@ -155,22 +153,12 @@ void pch_iobp_update(struct udevice *dev, u32 address, u32 andvalue,
 
 static int bd82x6x_probe(struct udevice *dev)
 {
-	struct udevice *gma_dev;
-	int ret;
-
 	if (!(gd->flags & GD_FLG_RELOC))
 		return 0;
 
 	/* Cause the SATA device to do its init */
 	uclass_first_device(UCLASS_AHCI, &dev);
 
-	ret = syscon_get_by_driver_data(X86_SYSCON_GMA, &gma_dev);
-	if (ret)
-		return ret;
-	ret = gma_func0_init(gma_dev);
-	if (ret)
-		return ret;
-
 	return 0;
 }
 #endif /* CONFIG_HAVE_FSP */
diff --git a/arch/x86/cpu/ivybridge/early_me.c b/arch/x86/cpu/ivybridge/early_me.c
index cda96ab..5435a92 100644
--- a/arch/x86/cpu/ivybridge/early_me.c
+++ b/arch/x86/cpu/ivybridge/early_me.c
@@ -162,7 +162,6 @@ int intel_early_me_init_done(struct udevice *dev, struct udevice *me_dev,
 
 static const struct udevice_id ivybridge_syscon_ids[] = {
 	{ .compatible = "intel,me", .data = X86_SYSCON_ME },
-	{ .compatible = "intel,gma", .data = X86_SYSCON_GMA },
 	{ }
 };
 
diff --git a/arch/x86/cpu/ivybridge/gma.h b/arch/x86/cpu/ivybridge/gma.h
deleted file mode 100644
index e7ec649..0000000
--- a/arch/x86/cpu/ivybridge/gma.h
+++ /dev/null
@@ -1,156 +0,0 @@
-/*
- * From Coreboot file of the same name
- *
- * Copyright (C) 2012 Chromium OS Authors
- *
- * SPDX-License-Identifier:	GPL-2.0
- */
-
-/* mailbox 0: header */
-__packed struct opregion_header {
-	u8	signature[16];
-	u32	size;
-	u32	version;
-	u8	sbios_version[32];
-	u8	vbios_version[16];
-	u8	driver_version[16];
-	u32	mailboxes;
-	u8	reserved[164];
-};
-
-#define IGD_OPREGION_SIGNATURE "IntelGraphicsMem"
-#define IGD_OPREGION_VERSION  2
-
-#define IGD_MBOX1	(1 << 0)
-#define IGD_MBOX2	(1 << 1)
-#define IGD_MBOX3	(1 << 2)
-#define IGD_MBOX4	(1 << 3)
-#define IGD_MBOX5	(1 << 4)
-
-#define MAILBOXES_MOBILE  (IGD_MBOX1 | IGD_MBOX2 | IGD_MBOX3 | \
-			   IGD_MBOX4 | IGD_MBOX5)
-#define MAILBOXES_DESKTOP (IGD_MBOX2 | IGD_MBOX4)
-
-#define SBIOS_VERSION_SIZE 32
-
-/* mailbox 1: public acpi methods */
-__packed struct opregion_mailbox1 {
-	u32	drdy;
-	u32	csts;
-	u32	cevt;
-	u8	reserved1[20];
-	u32	didl[8];
-	u32	cpdl[8];
-	u32	cadl[8];
-	u32	nadl[8];
-	u32	aslp;
-	u32	tidx;
-	u32	chpd;
-	u32	clid;
-	u32	cdck;
-	u32	sxsw;
-	u32	evts;
-	u32	cnot;
-	u32	nrdy;
-	u8	reserved2[60];
-};
-
-/* mailbox 2: software sci interface */
-__packed struct opregion_mailbox2 {
-	u32	scic;
-	u32	parm;
-	u32	dslp;
-	u8	reserved[244];
-};
-
-/* mailbox 3: power conservation */
-__packed struct opregion_mailbox3 {
-	u32	ardy;
-	u32	aslc;
-	u32	tche;
-	u32	alsi;
-	u32	bclp;
-	u32	pfit;
-	u32	cblv;
-	u16	bclm[20];
-	u32	cpfm;
-	u32	epfm;
-	u8	plut[74];
-	u32	pfmb;
-	u32	ccdv;
-	u32	pcft;
-	u8	reserved[94];
-};
-
-#define IGD_BACKLIGHT_BRIGHTNESS 0xff
-#define IGD_INITIAL_BRIGHTNESS 0x64
-
-#define IGD_FIELD_VALID	(1 << 31)
-#define IGD_WORD_FIELD_VALID (1 << 15)
-#define IGD_PFIT_STRETCH 6
-
-/* mailbox 4: vbt */
-__packed struct {
-	u8 gvd1[7168];
-} opregion_vbt_t;
-
-/* IGD OpRegion */
-__packed struct igd_opregion {
-	opregion_header_t header;
-	opregion_mailbox1_t mailbox1;
-	opregion_mailbox2_t mailbox2;
-	opregion_mailbox3_t mailbox3;
-	opregion_vbt_t vbt;
-};
-
-/* Intel Video BIOS (Option ROM) */
-__packed struct optionrom_header {
-	u16	signature;
-	u8	size;
-	u8	reserved[21];
-	u16	pcir_offset;
-	u16	vbt_offset;
-};
-
-#define OPROM_SIGNATURE 0xaa55
-
-__packed struct optionrom_pcir {
-	u32 signature;
-	u16 vendor;
-	u16 device;
-	u16 reserved1;
-	u16 length;
-	u8  revision;
-	u8  classcode[3];
-	u16 imagelength;
-	u16 coderevision;
-	u8  codetype;
-	u8  indicator;
-	u16 reserved2;
-};
-
-__packed struct optionrom_vbt {
-	u8  hdr_signature[20];
-	u16 hdr_version;
-	u16 hdr_size;
-	u16 hdr_vbt_size;
-	u8  hdr_vbt_checksum;
-	u8  hdr_reserved;
-	u32 hdr_vbt_datablock;
-	u32 hdr_aim[4];
-	u8  datahdr_signature[16];
-	u16 datahdr_version;
-	u16 datahdr_size;
-	u16 datahdr_datablocksize;
-	u8  coreblock_id;
-	u16 coreblock_size;
-	u16 coreblock_biossize;
-	u8  coreblock_biostype;
-	u8  coreblock_releasestatus;
-	u8  coreblock_hwsupported;
-	u8  coreblock_integratedhw;
-	u8  coreblock_biosbuild[4];
-	u8  coreblock_biossignon[155];
-};
-
-#define VBT_SIGNATURE 0x54425624
diff --git a/arch/x86/cpu/ivybridge/lpc.c b/arch/x86/cpu/ivybridge/lpc.c
index 4e0be2a..4af89b3 100644
--- a/arch/x86/cpu/ivybridge/lpc.c
+++ b/arch/x86/cpu/ivybridge/lpc.c
@@ -213,10 +213,10 @@ static int pch_power_options(struct udevice *pch)
 	dm_pci_read_config16(pch, 0x40, &pmbase);
 	pmbase &= 0xfffe;
 
-	writel(pmbase + GPE0_EN, fdtdec_get_int(blob, node,
-						"intel,gpe0-enable", 0));
-	writew(pmbase + ALT_GP_SMI_EN, fdtdec_get_int(blob, node,
-						"intel,alt-gp-smi-enable", 0));
+	writel(fdtdec_get_int(blob, node, "intel,gpe0-enable", 0),
+	       (ulong)pmbase + GPE0_EN);
+	writew(fdtdec_get_int(blob, node, "intel,alt-gp-smi-enable", 0),
+	       (ulong)pmbase + ALT_GP_SMI_EN);
 
 	/* Set up power management block and determine sleep mode */
 	reg32 = inl(pmbase + 0x04); /* PM1_CNT */
@@ -355,10 +355,10 @@ static void enable_clock_gating(struct udevice *pch)
 	reg16 |= (1 << 2) | (1 << 11);
 	dm_pci_write_config16(pch, GEN_PMCON_1, reg16);
 
-	pch_iobp_update(pch, 0xEB007F07, ~0UL, (1 << 31));
-	pch_iobp_update(pch, 0xEB004000, ~0UL, (1 << 7));
-	pch_iobp_update(pch, 0xEC007F07, ~0UL, (1 << 31));
-	pch_iobp_update(pch, 0xEC004000, ~0UL, (1 << 7));
+	pch_iobp_update(pch, 0xeb007f07, ~0U, 1 << 31);
+	pch_iobp_update(pch, 0xeb004000, ~0U, 1 << 7);
+	pch_iobp_update(pch, 0xec007f07, ~0U, 1 << 31);
+	pch_iobp_update(pch, 0xec004000, ~0U, 1 << 7);
 
 	reg32 = readl(RCB_REG(CG));
 	reg32 |= (1 << 31);
diff --git a/arch/x86/cpu/ivybridge/model_206ax.c b/arch/x86/cpu/ivybridge/model_206ax.c
index 38e244b..b074367 100644
--- a/arch/x86/cpu/ivybridge/model_206ax.c
+++ b/arch/x86/cpu/ivybridge/model_206ax.c
@@ -20,7 +20,6 @@
 #include <asm/processor.h>
 #include <asm/speedstep.h>
 #include <asm/turbo.h>
-#include <asm/arch/bd82x6x.h>
 #include <asm/arch/model_206ax.h>
 
 static void enable_vmx(void)
diff --git a/arch/x86/cpu/ivybridge/sata.c b/arch/x86/cpu/ivybridge/sata.c
index 1ce8195..87ff872 100644
--- a/arch/x86/cpu/ivybridge/sata.c
+++ b/arch/x86/cpu/ivybridge/sata.c
@@ -12,7 +12,6 @@
 #include <asm/pch_common.h>
 #include <asm/pci.h>
 #include <asm/arch/pch.h>
-#include <asm/arch/bd82x6x.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
diff --git a/arch/x86/dts/bayleybay.dts b/arch/x86/dts/bayleybay.dts
index c8907ce..18b310d 100644
--- a/arch/x86/dts/bayleybay.dts
+++ b/arch/x86/dts/bayleybay.dts
@@ -14,6 +14,7 @@
 /include/ "serial.dtsi"
 /include/ "rtc.dtsi"
 /include/ "tsc_timer.dtsi"
+/include/ "coreboot_fb.dtsi"
 
 / {
 	model = "Intel Bayley Bay";
diff --git a/arch/x86/dts/broadwell_som-6896.dts b/arch/x86/dts/broadwell_som-6896.dts
index 4bb0a34..3966199 100644
--- a/arch/x86/dts/broadwell_som-6896.dts
+++ b/arch/x86/dts/broadwell_som-6896.dts
@@ -4,6 +4,7 @@
 /include/ "serial.dtsi"
 /include/ "rtc.dtsi"
 /include/ "tsc_timer.dtsi"
+/include/ "coreboot_fb.dtsi"
 
 / {
 	model = "Advantech SOM-6896";
diff --git a/arch/x86/dts/chromebook_link.dts b/arch/x86/dts/chromebook_link.dts
index fb1b31d..b932340 100644
--- a/arch/x86/dts/chromebook_link.dts
+++ b/arch/x86/dts/chromebook_link.dts
@@ -7,6 +7,7 @@
 /include/ "serial.dtsi"
 /include/ "rtc.dtsi"
 /include/ "tsc_timer.dtsi"
+/include/ "coreboot_fb.dtsi"
 
 / {
 	model = "Google Link";
diff --git a/arch/x86/dts/chromebook_samus.dts b/arch/x86/dts/chromebook_samus.dts
index 5dd3e57..52a9ea6 100644
--- a/arch/x86/dts/chromebook_samus.dts
+++ b/arch/x86/dts/chromebook_samus.dts
@@ -7,6 +7,7 @@
 /include/ "serial.dtsi"
 /include/ "rtc.dtsi"
 /include/ "tsc_timer.dtsi"
+/include/ "coreboot_fb.dtsi"
 
 / {
 	model = "Google Samus";
diff --git a/arch/x86/dts/chromebox_panther.dts b/arch/x86/dts/chromebox_panther.dts
index 480b366..b25c919 100644
--- a/arch/x86/dts/chromebox_panther.dts
+++ b/arch/x86/dts/chromebox_panther.dts
@@ -4,6 +4,7 @@
 /include/ "serial.dtsi"
 /include/ "rtc.dtsi"
 /include/ "tsc_timer.dtsi"
+/include/ "coreboot_fb.dtsi"
 
 / {
 	model = "Google Panther";
diff --git a/arch/x86/dts/coreboot_fb.dtsi b/arch/x86/dts/coreboot_fb.dtsi
new file mode 100644
index 0000000..7d72f18
--- /dev/null
+++ b/arch/x86/dts/coreboot_fb.dtsi
@@ -0,0 +1,5 @@
+/ {
+	coreboot-fb {
+		compatible = "coreboot-fb";
+	};
+};
diff --git a/arch/x86/dts/minnowmax.dts b/arch/x86/dts/minnowmax.dts
index 1a8a8cc..d51318b 100644
--- a/arch/x86/dts/minnowmax.dts
+++ b/arch/x86/dts/minnowmax.dts
@@ -13,6 +13,7 @@
 /include/ "serial.dtsi"
 /include/ "rtc.dtsi"
 /include/ "tsc_timer.dtsi"
+/include/ "coreboot_fb.dtsi"
 
 / {
 	model = "Intel Minnowboard Max";
diff --git a/arch/x86/include/asm/arch-ivybridge/bd82x6x.h b/arch/x86/include/asm/arch-ivybridge/bd82x6x.h
deleted file mode 100644
index e866580..0000000
--- a/arch/x86/include/asm/arch-ivybridge/bd82x6x.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/*
- * Copyright (C) 2014 Google, Inc
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef _ASM_ARCH_BD82X6X_H
-#define _ASM_ARCH_BD82X6X_H
-
-int gma_func0_init(struct udevice *dev);
-
-#endif
diff --git a/arch/x86/include/asm/bootparam.h b/arch/x86/include/asm/bootparam.h
index 1400951..a373a79 100644
--- a/arch/x86/include/asm/bootparam.h
+++ b/arch/x86/include/asm/bootparam.h
@@ -63,6 +63,9 @@ struct setup_header {
 	__u32	payload_offset;
 	__u32	payload_length;
 	__u64	setup_data;
+	__u64	pref_address;
+	__u32	init_size;
+	__u32	handover_offset;
 } __attribute__((packed));
 
 struct sys_desc_table {
diff --git a/arch/x86/include/asm/cpu.h b/arch/x86/include/asm/cpu.h
index 7892757..540024a 100644
--- a/arch/x86/include/asm/cpu.h
+++ b/arch/x86/include/asm/cpu.h
@@ -53,7 +53,6 @@ enum {
 enum {
 	X86_NONE,
 	X86_SYSCON_ME,		/* Intel Management Engine */
-	X86_SYSCON_GMA,		/* Intel Graphics Media Accelerator */
 	X86_SYSCON_PINCONF,	/* Intel x86 pin configuration */
 };
 
diff --git a/arch/x86/include/asm/init_helpers.h b/arch/x86/include/asm/init_helpers.h
index c689a63..ef05ac4 100644
--- a/arch/x86/include/asm/init_helpers.h
+++ b/arch/x86/include/asm/init_helpers.h
@@ -9,7 +9,5 @@
 #define _INIT_HELPERS_H_
 
 int init_cache_f_r(void);
-int init_bd_struct_r(void);
-int init_func_spi(void);
 
 #endif	/* !_INIT_HELPERS_H_ */
diff --git a/arch/x86/include/asm/string.h b/arch/x86/include/asm/string.h
index 0ad612f..38afd23 100644
--- a/arch/x86/include/asm/string.h
+++ b/arch/x86/include/asm/string.h
@@ -17,7 +17,7 @@ extern char * strchr(const char * s, int c);
 #define __HAVE_ARCH_MEMCPY
 extern void * memcpy(void *, const void *, __kernel_size_t);
 
-#undef __HAVE_ARCH_MEMMOVE
+#define __HAVE_ARCH_MEMMOVE
 extern void * memmove(void *, const void *, __kernel_size_t);
 
 #undef __HAVE_ARCH_MEMCHR
diff --git a/arch/x86/lib/init_helpers.c b/arch/x86/lib/init_helpers.c
index bac671d..2a186fc 100644
--- a/arch/x86/lib/init_helpers.c
+++ b/arch/x86/lib/init_helpers.c
@@ -30,13 +30,3 @@ int init_cache_f_r(void)
 	/* Initialise the CPU cache(s) */
 	return init_cache();
 }
-
-bd_t bd_data;
-
-int init_bd_struct_r(void)
-{
-	gd->bd = &bd_data;
-	memset(gd->bd, 0, sizeof(bd_t));
-
-	return 0;
-}
diff --git a/arch/x86/lib/mrccache.c b/arch/x86/lib/mrccache.c
index 67bace4..eca88ac 100644
--- a/arch/x86/lib/mrccache.c
+++ b/arch/x86/lib/mrccache.c
@@ -198,11 +198,13 @@ int mrccache_get_region(struct udevice **devp, struct mrc_region *entry)
 
 	/* Find the flash chip within the SPI controller node */
 	node = fdtdec_next_compatible(blob, 0, COMPAT_GENERIC_SPI_FLASH);
-	if (node < 0)
+	if (node < 0) {
+		debug("%s: Cannot find SPI flash\n", __func__);
 		return -ENOENT;
+	}
 
 	if (fdtdec_get_int_array(blob, node, "memory-map", reg, 2))
-		return -FDT_ERR_NOTFOUND;
+		return -EINVAL;
 	entry->base = reg[0];
 
 	/* Find the place where we put the MRC cache */
@@ -211,7 +213,7 @@ int mrccache_get_region(struct udevice **devp, struct mrc_region *entry)
 		return -EPERM;
 
 	if (fdtdec_get_int_array(blob, mrc_node, "reg", reg, 2))
-		return -FDT_ERR_NOTFOUND;
+		return -EINVAL;
 	entry->offset = reg[0];
 	entry->length = reg[1];
 
diff --git a/arch/x86/lib/string.c b/arch/x86/lib/string.c
index 6c66431..5343c2b 100644
--- a/arch/x86/lib/string.c
+++ b/arch/x86/lib/string.c
@@ -130,3 +130,164 @@ void *memcpy(void *dstpp, const void *srcpp, size_t len)
 
 	return dstpp;
 }
+
+void *memmove(void *dest, const void *src, size_t n)
+{
+	int d0, d1, d2, d3, d4, d5;
+	char *ret = dest;
+
+	__asm__ __volatile__(
+		/* Handle more 16 bytes in loop */
+		"cmp $0x10, %0\n\t"
+		"jb	1f\n\t"
+
+		/* Decide forward/backward copy mode */
+		"cmp %2, %1\n\t"
+		"jb	2f\n\t"
+
+		/*
+		 * movs instruction have many startup latency
+		 * so we handle small size by general register.
+		 */
+		"cmp  $680, %0\n\t"
+		"jb 3f\n\t"
+		/* movs instruction is only good for aligned case */
+		"mov %1, %3\n\t"
+		"xor %2, %3\n\t"
+		"and $0xff, %3\n\t"
+		"jz 4f\n\t"
+		"3:\n\t"
+		"sub $0x10, %0\n\t"
+
+		/* We gobble 16 bytes forward in each loop */
+		"3:\n\t"
+		"sub $0x10, %0\n\t"
+		"mov 0*4(%1), %3\n\t"
+		"mov 1*4(%1), %4\n\t"
+		"mov  %3, 0*4(%2)\n\t"
+		"mov  %4, 1*4(%2)\n\t"
+		"mov 2*4(%1), %3\n\t"
+		"mov 3*4(%1), %4\n\t"
+		"mov  %3, 2*4(%2)\n\t"
+		"mov  %4, 3*4(%2)\n\t"
+		"lea  0x10(%1), %1\n\t"
+		"lea  0x10(%2), %2\n\t"
+		"jae 3b\n\t"
+		"add $0x10, %0\n\t"
+		"jmp 1f\n\t"
+
+		/* Handle data forward by movs */
+		".p2align 4\n\t"
+		"4:\n\t"
+		"mov -4(%1, %0), %3\n\t"
+		"lea -4(%2, %0), %4\n\t"
+		"shr $2, %0\n\t"
+		"rep movsl\n\t"
+		"mov %3, (%4)\n\t"
+		"jmp 11f\n\t"
+		/* Handle data backward by movs */
+		".p2align 4\n\t"
+		"6:\n\t"
+		"mov (%1), %3\n\t"
+		"mov %2, %4\n\t"
+		"lea -4(%1, %0), %1\n\t"
+		"lea -4(%2, %0), %2\n\t"
+		"shr $2, %0\n\t"
+		"std\n\t"
+		"rep movsl\n\t"
+		"mov %3,(%4)\n\t"
+		"cld\n\t"
+		"jmp 11f\n\t"
+
+		/* Start to prepare for backward copy */
+		".p2align 4\n\t"
+		"2:\n\t"
+		"cmp  $680, %0\n\t"
+		"jb 5f\n\t"
+		"mov %1, %3\n\t"
+		"xor %2, %3\n\t"
+		"and $0xff, %3\n\t"
+		"jz 6b\n\t"
+
+		/* Calculate copy position to tail */
+		"5:\n\t"
+		"add %0, %1\n\t"
+		"add %0, %2\n\t"
+		"sub $0x10, %0\n\t"
+
+		/* We gobble 16 bytes backward in each loop */
+		"7:\n\t"
+		"sub $0x10, %0\n\t"
+
+		"mov -1*4(%1), %3\n\t"
+		"mov -2*4(%1), %4\n\t"
+		"mov  %3, -1*4(%2)\n\t"
+		"mov  %4, -2*4(%2)\n\t"
+		"mov -3*4(%1), %3\n\t"
+		"mov -4*4(%1), %4\n\t"
+		"mov  %3, -3*4(%2)\n\t"
+		"mov  %4, -4*4(%2)\n\t"
+		"lea  -0x10(%1), %1\n\t"
+		"lea  -0x10(%2), %2\n\t"
+		"jae 7b\n\t"
+		/* Calculate copy position to head */
+		"add $0x10, %0\n\t"
+		"sub %0, %1\n\t"
+		"sub %0, %2\n\t"
+
+		/* Move data from 8 bytes to 15 bytes */
+		".p2align 4\n\t"
+		"1:\n\t"
+		"cmp $8, %0\n\t"
+		"jb 8f\n\t"
+		"mov 0*4(%1), %3\n\t"
+		"mov 1*4(%1), %4\n\t"
+		"mov -2*4(%1, %0), %5\n\t"
+		"mov -1*4(%1, %0), %1\n\t"
+
+		"mov  %3, 0*4(%2)\n\t"
+		"mov  %4, 1*4(%2)\n\t"
+		"mov  %5, -2*4(%2, %0)\n\t"
+		"mov  %1, -1*4(%2, %0)\n\t"
+		"jmp 11f\n\t"
+
+		/* Move data from 4 bytes to 7 bytes */
+		".p2align 4\n\t"
+		"8:\n\t"
+		"cmp $4, %0\n\t"
+		"jb 9f\n\t"
+		"mov 0*4(%1), %3\n\t"
+		"mov -1*4(%1, %0), %4\n\t"
+		"mov  %3, 0*4(%2)\n\t"
+		"mov  %4, -1*4(%2, %0)\n\t"
+		"jmp 11f\n\t"
+
+		/* Move data from 2 bytes to 3 bytes */
+		".p2align 4\n\t"
+		"9:\n\t"
+		"cmp $2, %0\n\t"
+		"jb 10f\n\t"
+		"movw 0*2(%1), %%dx\n\t"
+		"movw -1*2(%1, %0), %%bx\n\t"
+		"movw %%dx, 0*2(%2)\n\t"
+		"movw %%bx, -1*2(%2, %0)\n\t"
+		"jmp 11f\n\t"
+
+		/* Move data for 1 byte */
+		".p2align 4\n\t"
+		"10:\n\t"
+		"cmp $1, %0\n\t"
+		"jb 11f\n\t"
+		"movb (%1), %%cl\n\t"
+		"movb %%cl, (%2)\n\t"
+		".p2align 4\n\t"
+		"11:"
+		: "=&c" (d0), "=&S" (d1), "=&D" (d2),
+		  "=r" (d3), "=r" (d4), "=r"(d5)
+		: "0" (n),
+		 "1" (src),
+		 "2" (dest)
+		: "memory");
+
+	return ret;
+}
diff --git a/board/congatec/conga-qeval20-qa3-e3845/README b/board/congatec/conga-qeval20-qa3-e3845/README
new file mode 100644
index 0000000..98ff992
--- /dev/null
+++ b/board/congatec/conga-qeval20-qa3-e3845/README
@@ -0,0 +1,23 @@
+------------------------------
+U-Boot console UART selection:
+------------------------------
+
+The U-Boot port for this congatec board currently supports two different
+configurations (defconfig files). The only difference is the UART that
+is used as the U-Boot console UART. The default defconfig file:
+
+conga-qeval20-qa3-e3845_defconfig
+
+provides this console on the UART0 which is provided via a Winbond
+Super-IO chip connected on the congatec Qseven 2.0 evaluation carrier
+board (conga-QEVAL). This UART is the one provided with a SubD9
+connector on the mainboard (the low one). The 2nd defconfig file:
+
+conga-qeval20-qa3-e3845-internal-uart_defconfig
+
+provides the U-Boot console on the BayTrail internal legacy UART,
+which is routed from the QSeven SoM to the X300 connector on the
+baseboard. Here is called COM2. The baseboard already provides the
+RS232 level shifters. So a TTL-USB UART adapter does not work in
+this case. The signals need to get connected directly to the
+RS232 level signals of the PC UART via some adapter cable.
diff --git a/common/board_f.c b/common/board_f.c
index 1b88822..4b74835 100644
--- a/common/board_f.c
+++ b/common/board_f.c
@@ -912,9 +912,6 @@ static init_fnc_t init_sequence_f[] = {
 #ifdef CONFIG_SANDBOX
 	sandbox_early_getopt_check,
 #endif
-#ifdef CONFIG_OF_CONTROL
-	fdtdec_prepare_fdt,
-#endif
 	display_options,	/* say that we are here */
 	display_text_info,	/* show debugging info if required */
 #if defined(CONFIG_MPC8260)
diff --git a/common/stdio.c b/common/stdio.c
index f99cfe7..ab9b05d 100644
--- a/common/stdio.c
+++ b/common/stdio.c
@@ -121,19 +121,87 @@ struct list_head* stdio_get_list(void)
 	return &(devs.list);
 }
 
+#ifdef CONFIG_DM_VIDEO
+/**
+ * stdio_probe_device() - Find a device which provides the given stdio device
+ *
+ * This looks for a device of the given uclass which provides a particular
+ * stdio device. It is currently really only useful for UCLASS_VIDEO.
+ *
+ * Ultimately we want to be able to probe a device by its stdio name. At
+ * present devices register in their probe function (for video devices this
+ * is done in vidconsole_post_probe()) and we don't know what name they will
+ * use until they do so.
+ * TODO(sjg@chromium.org): We should be able to determine the name before
+ * probing, and probe the required device.
+ *
+ * @name:	stdio device name (e.g. "vidconsole")
+ * id:		Uclass ID of device to look for (e.g. UCLASS_VIDEO)
+ * @sdevp:	Returns stdout device, if found, else NULL
+ * @return 0 if found, -ENOENT if no device found with that name, other -ve
+ *	   on other error
+ */
+static int stdio_probe_device(const char *name, enum uclass_id id,
+			      struct stdio_dev **sdevp)
+{
+	struct stdio_dev *sdev;
+	struct udevice *dev;
+	int seq, ret;
+
+	*sdevp = NULL;
+	seq = trailing_strtoln(name, NULL);
+	if (seq == -1)
+		ret = uclass_first_device_err(id, &dev);
+	else
+		ret = uclass_get_device_by_seq(id, seq, &dev);
+	if (ret) {
+		debug("No %s device for seq %d (%s)\n", uclass_get_name(id),
+		      seq, name);
+		return ret;
+	}
+	/* The device should be be the last one registered */
+	sdev = list_empty(&devs.list) ? NULL :
+			list_last_entry(&devs.list, struct stdio_dev, list);
+	if (!sdev || strcmp(sdev->name, name)) {
+		debug("Device '%s' did not register with stdio as '%s'\n",
+		      dev->name, name);
+		return -ENOENT;
+	}
+	*sdevp = sdev;
+
+	return 0;
+}
+#endif
+
 struct stdio_dev* stdio_get_by_name(const char *name)
 {
 	struct list_head *pos;
-	struct stdio_dev *dev;
+	struct stdio_dev *sdev;
 
 	if(!name)
 		return NULL;
 
 	list_for_each(pos, &(devs.list)) {
-		dev = list_entry(pos, struct stdio_dev, list);
-		if(strcmp(dev->name, name) == 0)
-			return dev;
+		sdev = list_entry(pos, struct stdio_dev, list);
+		if (strcmp(sdev->name, name) == 0)
+			return sdev;
 	}
+#ifdef CONFIG_DM_VIDEO
+	/*
+	 * We did not find a suitable stdio device. If there is a video
+	 * driver with a name starting with 'vidconsole', we can try probing
+	 * that in the hope that it will produce the required stdio device.
+	 *
+	 * This function is sometimes called with the entire value of
+	 * 'stdout', which may include a list of devices separate by commas.
+	 * Obviously this is not going to work, so we ignore that case. The
+	 * call path in that case is console_init_r() -> search_device() ->
+	 * stdio_get_by_name().
+	 */
+	if (!strncmp(name, "vidconsole", 10) && !strchr(name, ',') &&
+	    !stdio_probe_device(name, UCLASS_VIDEO, &sdev))
+		return sdev;
+#endif
 
 	return NULL;
 }
@@ -282,6 +350,16 @@ int stdio_add_devices(void)
 #endif
 #endif
 #ifdef CONFIG_DM_VIDEO
+	/*
+	 * If the console setting is not in environment variables then
+	 * console_init_r() will not be calling iomux_doenv() (which calls
+	 * search_device()). So we will not dynamically add devices by
+	 * calling stdio_probe_device().
+	 *
+	 * So just probe all video devices now so that whichever one is
+	 * required will be available.
+	 */
+#ifndef CONFIG_SYS_CONSOLE_IS_IN_ENV
 	struct udevice *vdev;
 # ifndef CONFIG_DM_KEYBOARD
 	int ret;
@@ -293,6 +371,7 @@ int stdio_add_devices(void)
 		;
 	if (ret)
 		printf("%s: Video device failed (ret=%d)\n", __func__, ret);
+#endif /* !CONFIG_SYS_CONSOLE_IS_IN_ENV */
 #else
 # if defined(CONFIG_LCD)
 	drv_lcd_init ();
diff --git a/configs/bayleybay_defconfig b/configs/bayleybay_defconfig
index 64e3d31..f8f5f5c 100644
--- a/configs/bayleybay_defconfig
+++ b/configs/bayleybay_defconfig
@@ -53,6 +53,7 @@ CONFIG_TIMER=y
 CONFIG_USB=y
 CONFIG_DM_USB=y
 CONFIG_USB_STORAGE=y
+CONFIG_DM_VIDEO=y
 CONFIG_VIDEO_VESA=y
 CONFIG_FRAMEBUFFER_SET_VESA_MODE=y
 CONFIG_FRAMEBUFFER_VESA_MODE_11A=y
diff --git a/configs/chromebook_link_defconfig b/configs/chromebook_link_defconfig
index 8c91bfe..2475222 100644
--- a/configs/chromebook_link_defconfig
+++ b/configs/chromebook_link_defconfig
@@ -57,8 +57,10 @@ CONFIG_TPM_TIS_LPC=y
 CONFIG_USB=y
 CONFIG_DM_USB=y
 CONFIG_USB_STORAGE=y
+CONFIG_DM_VIDEO=y
 CONFIG_VIDEO_VESA=y
 CONFIG_FRAMEBUFFER_SET_VESA_MODE=y
 CONFIG_FRAMEBUFFER_VESA_MODE_11A=y
+CONFIG_VIDEO_IVYBRIDGE_IGD=y
 CONFIG_USE_PRIVATE_LIBGCC=y
 CONFIG_TPM=y
diff --git a/configs/chromebox_panther_defconfig b/configs/chromebox_panther_defconfig
index 2557d35..6df4d4c 100644
--- a/configs/chromebox_panther_defconfig
+++ b/configs/chromebox_panther_defconfig
@@ -49,6 +49,7 @@ CONFIG_TPM_TIS_LPC=y
 CONFIG_USB=y
 CONFIG_DM_USB=y
 CONFIG_USB_STORAGE=y
+CONFIG_DM_VIDEO=y
 CONFIG_VIDEO_VESA=y
 CONFIG_FRAMEBUFFER_SET_VESA_MODE=y
 CONFIG_FRAMEBUFFER_VESA_MODE_11A=y
diff --git a/configs/conga-qeval20-qa3-e3845-internal-uart_defconfig b/configs/conga-qeval20-qa3-e3845-internal-uart_defconfig
index f0da176..6bee9c6 100644
--- a/configs/conga-qeval20-qa3-e3845-internal-uart_defconfig
+++ b/configs/conga-qeval20-qa3-e3845-internal-uart_defconfig
@@ -61,6 +61,7 @@ CONFIG_TIMER=y
 CONFIG_USB=y
 CONFIG_DM_USB=y
 CONFIG_USB_STORAGE=y
+CONFIG_DM_VIDEO=y
 CONFIG_VIDEO_VESA=y
 CONFIG_FRAMEBUFFER_SET_VESA_MODE=y
 CONFIG_FRAMEBUFFER_VESA_MODE_114=y
diff --git a/configs/conga-qeval20-qa3-e3845_defconfig b/configs/conga-qeval20-qa3-e3845_defconfig
index 63c2cbd..76ff904 100644
--- a/configs/conga-qeval20-qa3-e3845_defconfig
+++ b/configs/conga-qeval20-qa3-e3845_defconfig
@@ -60,6 +60,7 @@ CONFIG_TIMER=y
 CONFIG_USB=y
 CONFIG_DM_USB=y
 CONFIG_USB_STORAGE=y
+CONFIG_DM_VIDEO=y
 CONFIG_VIDEO_VESA=y
 CONFIG_FRAMEBUFFER_SET_VESA_MODE=y
 CONFIG_FRAMEBUFFER_VESA_MODE_114=y
diff --git a/configs/coreboot-x86_defconfig b/configs/coreboot-x86_defconfig
index 378d75f..b33c5c4 100644
--- a/configs/coreboot-x86_defconfig
+++ b/configs/coreboot-x86_defconfig
@@ -40,5 +40,7 @@ CONFIG_TPM_TIS_LPC=y
 CONFIG_USB=y
 CONFIG_DM_USB=y
 CONFIG_USB_STORAGE=y
+CONFIG_DM_VIDEO=y
+CONFIG_VIDEO_COREBOOT=y
 CONFIG_USE_PRIVATE_LIBGCC=y
 CONFIG_TPM=y
diff --git a/configs/crownbay_defconfig b/configs/crownbay_defconfig
index d0cd9db..b37fce7 100644
--- a/configs/crownbay_defconfig
+++ b/configs/crownbay_defconfig
@@ -47,6 +47,7 @@ CONFIG_TIMER=y
 CONFIG_USB=y
 CONFIG_DM_USB=y
 CONFIG_USB_STORAGE=y
+CONFIG_DM_VIDEO=y
 CONFIG_VIDEO_VESA=y
 CONFIG_FRAMEBUFFER_SET_VESA_MODE=y
 CONFIG_USE_PRIVATE_LIBGCC=y
diff --git a/configs/dfi-bt700-q7x-151_defconfig b/configs/dfi-bt700-q7x-151_defconfig
index 245d0c7..3931896 100644
--- a/configs/dfi-bt700-q7x-151_defconfig
+++ b/configs/dfi-bt700-q7x-151_defconfig
@@ -58,6 +58,7 @@ CONFIG_TIMER=y
 CONFIG_USB=y
 CONFIG_DM_USB=y
 CONFIG_USB_STORAGE=y
+CONFIG_DM_VIDEO=y
 CONFIG_VIDEO_VESA=y
 CONFIG_FRAMEBUFFER_SET_VESA_MODE=y
 CONFIG_FRAMEBUFFER_VESA_MODE_114=y
diff --git a/configs/minnowmax_defconfig b/configs/minnowmax_defconfig
index 3d3a30d..1446ab6 100644
--- a/configs/minnowmax_defconfig
+++ b/configs/minnowmax_defconfig
@@ -57,6 +57,7 @@ CONFIG_TIMER=y
 CONFIG_USB=y
 CONFIG_DM_USB=y
 CONFIG_USB_STORAGE=y
+CONFIG_DM_VIDEO=y
 CONFIG_VIDEO_VESA=y
 CONFIG_FRAMEBUFFER_SET_VESA_MODE=y
 CONFIG_FRAMEBUFFER_VESA_MODE_11A=y
diff --git a/configs/qemu-x86_defconfig b/configs/qemu-x86_defconfig
index 769adf6..4cf0866 100644
--- a/configs/qemu-x86_defconfig
+++ b/configs/qemu-x86_defconfig
@@ -44,6 +44,7 @@ CONFIG_TIMER=y
 CONFIG_USB=y
 CONFIG_DM_USB=y
 CONFIG_USB_STORAGE=y
+CONFIG_DM_VIDEO=y
 CONFIG_VIDEO_VESA=y
 CONFIG_FRAMEBUFFER_SET_VESA_MODE=y
 CONFIG_FRAMEBUFFER_VESA_MODE_111=y
diff --git a/configs/qemu-x86_efi_payload32_defconfig b/configs/qemu-x86_efi_payload32_defconfig
index 75e7203..fd6afb8 100644
--- a/configs/qemu-x86_efi_payload32_defconfig
+++ b/configs/qemu-x86_efi_payload32_defconfig
@@ -41,6 +41,7 @@ CONFIG_TIMER=y
 CONFIG_USB=y
 CONFIG_DM_USB=y
 CONFIG_USB_STORAGE=y
+CONFIG_DM_VIDEO=y
 CONFIG_VIDEO_VESA=y
 CONFIG_FRAMEBUFFER_SET_VESA_MODE=y
 CONFIG_FRAMEBUFFER_VESA_MODE_111=y
diff --git a/configs/qemu-x86_efi_payload64_defconfig b/configs/qemu-x86_efi_payload64_defconfig
index 4bcd0dc..c6664b0 100644
--- a/configs/qemu-x86_efi_payload64_defconfig
+++ b/configs/qemu-x86_efi_payload64_defconfig
@@ -41,6 +41,7 @@ CONFIG_TIMER=y
 CONFIG_USB=y
 CONFIG_DM_USB=y
 CONFIG_USB_STORAGE=y
+CONFIG_DM_VIDEO=y
 CONFIG_VIDEO_VESA=y
 CONFIG_FRAMEBUFFER_SET_VESA_MODE=y
 CONFIG_FRAMEBUFFER_VESA_MODE_111=y
diff --git a/configs/som-db5800-som-6867_defconfig b/configs/som-db5800-som-6867_defconfig
index 4cfaeda..9fc169d 100644
--- a/configs/som-db5800-som-6867_defconfig
+++ b/configs/som-db5800-som-6867_defconfig
@@ -55,6 +55,7 @@ CONFIG_TIMER=y
 CONFIG_USB=y
 CONFIG_DM_USB=y
 CONFIG_USB_STORAGE=y
+CONFIG_DM_VIDEO=y
 CONFIG_VIDEO_VESA=y
 CONFIG_FRAMEBUFFER_SET_VESA_MODE=y
 CONFIG_FRAMEBUFFER_VESA_MODE_11A=y
diff --git a/configs/theadorable-x86-dfi-bt700_defconfig b/configs/theadorable-x86-dfi-bt700_defconfig
index cea91b6..43dc2fa 100644
--- a/configs/theadorable-x86-dfi-bt700_defconfig
+++ b/configs/theadorable-x86-dfi-bt700_defconfig
@@ -55,6 +55,7 @@ CONFIG_TIMER=y
 CONFIG_USB=y
 CONFIG_DM_USB=y
 CONFIG_USB_STORAGE=y
+CONFIG_DM_VIDEO=y
 CONFIG_VIDEO_VESA=y
 CONFIG_FRAMEBUFFER_SET_VESA_MODE=y
 CONFIG_FRAMEBUFFER_VESA_MODE_114=y
diff --git a/doc/README.x86 b/doc/README.x86
index ba5bb99..6799559 100644
--- a/doc/README.x86
+++ b/doc/README.x86
@@ -381,10 +381,17 @@ To enable video you must enable these options in coreboot:
    - Set framebuffer graphics resolution (1280x1024 32k-color (1:5:5))
    - Keep VESA framebuffer
 
+And include coreboot_fb.dtsi in your board's device tree source file, like:
+
+   /include/ "coreboot_fb.dtsi"
+
 At present it seems that for Minnowboard Max, coreboot does not pass through
 the video information correctly (it always says the resolution is 0x0). This
 works correctly for link though.
 
+Note: coreboot framebuffer driver does not work on QEMU. The reason is unknown
+at this point. Patches are welcome if you figure out anything wrong.
+
 Test with QEMU for bare mode
 ----------------------------
 QEMU is a fancy emulator that can enable us to test U-Boot without access to
@@ -446,7 +453,7 @@ loading kernel to address 01000000 size 5d9d30 initrd 04000000 size 1b1ab50
 Here the kernel (bzImage) is loaded to 01000000 and initrd is to 04000000. Then,
 'zboot' can be used to boot the kernel:
 
-=> zboot 02000000 - 04000000 1b1ab50
+=> zboot 01000000 - 04000000 1b1ab50
 
 CPU Microcode
 -------------
diff --git a/drivers/bios_emulator/atibios.c b/drivers/bios_emulator/atibios.c
index 7717246..2d5b5dc 100644
--- a/drivers/bios_emulator/atibios.c
+++ b/drivers/bios_emulator/atibios.c
@@ -599,7 +599,7 @@ int biosemu_run(pci_dev_t pcidev, uchar *bios_rom, int bios_len,
 	if (clean_up) {
 		BE_exit();
 		if (vga_info->BIOSImage &&
-		    (u32)(vga_info->BIOSImage) != 0xc0000)
+		    (ulong)(vga_info->BIOSImage) != 0xc0000)
 			free(vga_info->BIOSImage);
 		free(vga_info);
 		vga_info = NULL;
diff --git a/drivers/core/uclass.c b/drivers/core/uclass.c
index de602ae..60610e5 100644
--- a/drivers/core/uclass.c
+++ b/drivers/core/uclass.c
@@ -148,6 +148,15 @@ int uclass_get(enum uclass_id id, struct uclass **ucp)
 	return 0;
 }
 
+const char *uclass_get_name(enum uclass_id id)
+{
+	struct uclass *uc;
+
+	if (uclass_get(id, &uc))
+		return NULL;
+	return uc->uc_drv->name;
+}
+
 int uclass_find_device(enum uclass_id id, int index, struct udevice **devp)
 {
 	struct uclass *uc;
diff --git a/drivers/gpio/intel_broadwell_gpio.c b/drivers/gpio/intel_broadwell_gpio.c
index 8b50900..81ce446 100644
--- a/drivers/gpio/intel_broadwell_gpio.c
+++ b/drivers/gpio/intel_broadwell_gpio.c
@@ -9,6 +9,7 @@
 #include <fdtdec.h>
 #include <pch.h>
 #include <pci.h>
+#include <syscon.h>
 #include <asm/cpu.h>
 #include <asm/gpio.h>
 #include <asm/io.h>
@@ -118,6 +119,12 @@ static int broadwell_gpio_probe(struct udevice *dev)
 	struct broadwell_bank_platdata *plat = dev_get_platdata(dev);
 	struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev);
 	struct broadwell_bank_priv *priv = dev_get_priv(dev);
+	struct udevice *pinctrl;
+	int ret;
+
+	/* Set up pin control if available */
+	ret = syscon_get_by_driver_data(X86_SYSCON_PINCONF, &pinctrl);
+	debug("%s, pinctrl=%p, ret=%d\n", __func__, pinctrl, ret);
 
 	uc_priv->gpio_count = GPIO_PER_BANK;
 	uc_priv->bank_name = plat->bank_name;
diff --git a/drivers/i2c/intel_i2c.c b/drivers/i2c/intel_i2c.c
index a0182dc..550a728 100644
--- a/drivers/i2c/intel_i2c.c
+++ b/drivers/i2c/intel_i2c.c
@@ -248,11 +248,11 @@ static int intel_i2c_set_bus_speed(struct udevice *bus, unsigned int speed)
 static int intel_i2c_probe(struct udevice *dev)
 {
 	struct intel_i2c *priv = dev_get_priv(dev);
-	u32 base;
+	ulong base;
 
 	/* Save base address from PCI BAR */
-	priv->base = (u32)dm_pci_map_bar(dev, PCI_BASE_ADDRESS_4,
-					 PCI_REGION_IO);
+	priv->base = (ulong)dm_pci_map_bar(dev, PCI_BASE_ADDRESS_4,
+					   PCI_REGION_IO);
 	base = priv->base;
 
 	/* Set SMBus enable. */
diff --git a/drivers/pci/pci_rom.c b/drivers/pci/pci_rom.c
index 399055b..cd083f7 100644
--- a/drivers/pci/pci_rom.c
+++ b/drivers/pci/pci_rom.c
@@ -31,6 +31,7 @@
 #include <pci.h>
 #include <pci_rom.h>
 #include <vbe.h>
+#include <video.h>
 #include <video_fb.h>
 #include <linux/screen_info.h>
 
@@ -348,3 +349,64 @@ err:
 		free(ram);
 	return ret;
 }
+
+#ifdef CONFIG_DM_VIDEO
+int vbe_setup_video_priv(struct vesa_mode_info *vesa,
+			 struct video_priv *uc_priv,
+			 struct video_uc_platdata *plat)
+{
+	if (!vesa->x_resolution)
+		return -ENXIO;
+	uc_priv->xsize = vesa->x_resolution;
+	uc_priv->ysize = vesa->y_resolution;
+	switch (vesa->bits_per_pixel) {
+	case 32:
+	case 24:
+		uc_priv->bpix = VIDEO_BPP32;
+		break;
+	case 16:
+		uc_priv->bpix = VIDEO_BPP16;
+		break;
+	default:
+		return -EPROTONOSUPPORT;
+	}
+	plat->base = vesa->phys_base_ptr;
+	plat->size = vesa->bytes_per_scanline * vesa->y_resolution;
+
+	return 0;
+}
+
+int vbe_setup_video(struct udevice *dev, int (*int15_handler)(void))
+{
+	struct video_uc_platdata *plat = dev_get_uclass_platdata(dev);
+	struct video_priv *uc_priv = dev_get_uclass_priv(dev);
+	int ret;
+
+	printf("Video: ");
+
+	/* If we are running from EFI or coreboot, this can't work */
+	if (!ll_boot_init()) {
+		printf("Not available (previous bootloader prevents it)\n");
+		return -EPERM;
+	}
+	bootstage_start(BOOTSTAGE_ID_ACCUM_LCD, "vesa display");
+	ret = dm_pci_run_vga_bios(dev, int15_handler, PCI_ROM_USE_NATIVE |
+					PCI_ROM_ALLOW_FALLBACK);
+	bootstage_accum(BOOTSTAGE_ID_ACCUM_LCD);
+	if (ret) {
+		debug("failed to run video BIOS: %d\n", ret);
+		return ret;
+	}
+
+	ret = vbe_setup_video_priv(&mode_info.vesa, uc_priv, plat);
+	if (ret) {
+		debug("No video mode configured\n");
+		return ret;
+	}
+
+	printf("%dx%dx%d\n", uc_priv->xsize, uc_priv->ysize,
+	       mode_info.vesa.bits_per_pixel);
+
+	return 0;
+}
+#endif
diff --git a/drivers/rtc/mc146818.c b/drivers/rtc/mc146818.c
index da804d5..4df9eda 100644
--- a/drivers/rtc/mc146818.c
+++ b/drivers/rtc/mc146818.c
@@ -14,7 +14,7 @@
 #include <dm.h>
 #include <rtc.h>
 
-#if defined(__I386__) || defined(CONFIG_MALTA)
+#if defined(CONFIG_X86) || defined(CONFIG_MALTA)
 #include <asm/io.h>
 #define in8(p) inb(p)
 #define out8(p, v) outb(v, p)
diff --git a/drivers/tpm/tpm_tis_lpc.c b/drivers/tpm/tpm_tis_lpc.c
index 257d035..b4efbb5 100644
--- a/drivers/tpm/tpm_tis_lpc.c
+++ b/drivers/tpm/tpm_tis_lpc.c
@@ -204,7 +204,7 @@ static int tis_senddata(struct udevice *dev, const u8 *data, size_t len)
 		/* Wait till the device is ready to accept more data. */
 		while (!burst) {
 			if (max_cycles++ == MAX_DELAY_US) {
-				printf("%s:%d failed to feed %d bytes of %d\n",
+				printf("%s:%d failed to feed %zd bytes of %zd\n",
 				       __FILE__, __LINE__, len - offset, len);
 				return -ETIMEDOUT;
 			}
@@ -224,7 +224,7 @@ static int tis_senddata(struct udevice *dev, const u8 *data, size_t len)
 		 * changes to zero exactly after the last byte is fed into the
 		 * FIFO.
 		 */
-		count = min((u32)burst, len - offset - 1);
+		count = min((size_t)burst, len - offset - 1);
 		while (count--)
 			tpm_write_byte(priv, data[offset++],
 				       &regs[locality].data);
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index 6fc2479..f20fc33 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -32,8 +32,8 @@ static void ehci_pci_init(struct udevice *dev, struct ehci_hccr **ret_hccr,
 	hcor = (struct ehci_hcor *)((uintptr_t) hccr +
 			HC_LENGTH(ehci_readl(&hccr->cr_capbase)));
 
-	debug("EHCI-PCI init hccr 0x%x and hcor 0x%x hc_length %d\n",
-	      (u32)hccr, (u32)hcor,
+	debug("EHCI-PCI init hccr %#lx and hcor %#lx hc_length %d\n",
+	      (ulong)hccr, (ulong)hcor,
 	      (u32)HC_LENGTH(ehci_readl(&hccr->cr_capbase)));
 
 	*ret_hccr = hccr;
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 8361a71..86db0da 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -101,6 +101,15 @@ config VIDCONSOLE_AS_LCD
 	  to update the environment, the breakage may be confusing for users.
 	  This option will be removed around the end of 2016.
 
+config VIDEO_COREBOOT
+	bool "Enable coreboot framebuffer driver support"
+	depends on X86 && SYS_COREBOOT
+	help
+	  Turn on this option to enable a framebuffer driver when U-Boot is
+	  loaded by coreboot where the graphics device is configured by
+	  coreboot already. This can in principle be used with any platform
+	  that coreboot supports.
+
 config VIDEO_VESA
 	bool "Enable VESA video driver support"
 	default n
@@ -366,7 +375,19 @@ config VIDEO_BROADWELL_IGD
 	bool "Enable Intel Broadwell integrated graphics device"
 	depends on X86
 	help
-	  This enabled support for integrated graphics on Intel broadwell
+	  This enables support for integrated graphics on Intel broadwell
+	  devices. Initialisation is mostly performed by a VGA boot ROM, with
+	  some setup handled by U-Boot itself. The graphics adaptor works as
+	  a VESA device and supports LCD panels, eDP and LVDS outputs.
+	  Configuration of most aspects of device operation is performed using
+	  a special tool which configures the VGA ROM, but the graphics
+	  resolution can be selected in U-Boot.
+
+config VIDEO_IVYBRIDGE_IGD
+	bool "Enable Intel Ivybridge integration graphics support"
+	depends on X86
+	help
+	  This enables support for integrated graphics on Intel ivybridge
 	  devices. Initialisation is mostly performed by a VGA boot ROM, with
 	  some setup handled by U-Boot itself. The graphics adaptor works as
 	  a VESA device and supports LCD panels, eDP and LVDS outputs.
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index 3f045fe..4a42417 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -20,6 +20,7 @@ obj-$(CONFIG_CONSOLE_TRUETYPE) += console_truetype.o fonts/
 endif
 
 obj-$(CONFIG_VIDEO_BROADWELL_IGD) += broadwell_igd.o
+obj-$(CONFIG_VIDEO_IVYBRIDGE_IGD) += ivybridge_igd.o
 
 obj-$(CONFIG_ATI_RADEON_FB) += ati_radeon_fb.o videomodes.o
 obj-$(CONFIG_ATMEL_HLCD) += atmel_hlcdfb.o
@@ -36,7 +37,7 @@ obj-$(CONFIG_S6E63D6) += s6e63d6.o
 obj-$(CONFIG_LD9040) += ld9040.o
 obj-$(CONFIG_SED156X) += sed156x.o
 obj-$(CONFIG_VIDEO_BCM2835) += bcm2835.o
-obj-$(CONFIG_VIDEO_COREBOOT) += coreboot_fb.o
+obj-$(CONFIG_VIDEO_COREBOOT) += coreboot.o
 obj-$(CONFIG_VIDEO_CT69000) += ct69000.o videomodes.o
 obj-$(CONFIG_VIDEO_DA8XX) += da8xx-fb.o videomodes.o
 obj-$(CONFIG_VIDEO_IMX25LCDC) += imx25lcdc.o videomodes.o
@@ -57,7 +58,7 @@ obj-$(CONFIG_VIDEO_SMI_LYNXEM) += smiLynxEM.o videomodes.o
 obj-$(CONFIG_VIDEO_SUNXI) += sunxi_display.o videomodes.o
 obj-$(CONFIG_VIDEO_TEGRA20) += tegra.o
 obj-$(CONFIG_VIDEO_VCXK) += bus_vcxk.o
-obj-$(CONFIG_VIDEO_VESA) += vesa_fb.o
+obj-$(CONFIG_VIDEO_VESA) += vesa.o
 obj-$(CONFIG_FORMIKE) += formike.o
 obj-$(CONFIG_LG4573) += lg4573.o
 obj-$(CONFIG_AM335X_LCD) += am335x-fb.o
diff --git a/drivers/video/broadwell_igd.c b/drivers/video/broadwell_igd.c
index 4286fd0..beef770 100644
--- a/drivers/video/broadwell_igd.c
+++ b/drivers/video/broadwell_igd.c
@@ -9,10 +9,8 @@
 #include <common.h>
 #include <bios_emul.h>
 #include <dm.h>
-#include <pci_rom.h>
 #include <vbe.h>
 #include <video.h>
-#include <video_fb.h>
 #include <asm/cpu.h>
 #include <asm/intel_regs.h>
 #include <asm/io.h>
@@ -20,11 +18,9 @@
 #include <asm/arch/cpu.h>
 #include <asm/arch/iomap.h>
 #include <asm/arch/pch.h>
-#include <linux/log2.h>
 #include "i915_reg.h"
 
 struct broadwell_igd_priv {
-	GraphicDevice ctfb;
 	u8 *regs;
 };
 
@@ -664,10 +660,7 @@ static int broadwell_igd_probe(struct udevice *dev)
 {
 	struct video_uc_platdata *plat = dev_get_uclass_platdata(dev);
 	struct video_priv *uc_priv = dev_get_uclass_priv(dev);
-	struct broadwell_igd_priv *priv = dev_get_priv(dev);
 	bool is_broadwell;
-	GraphicDevice *gdev = &priv->ctfb;
-	int bits_per_pixel;
 	int ret;
 
 	if (!ll_boot_init()) {
@@ -683,13 +676,9 @@ static int broadwell_igd_probe(struct udevice *dev)
 	debug("%s: is_broadwell=%d\n", __func__, is_broadwell);
 	ret = igd_pre_init(dev, is_broadwell);
 	if (!ret) {
-		ret = dm_pci_run_vga_bios(dev, broadwell_igd_int15_handler,
-					  PCI_ROM_USE_NATIVE |
-					  PCI_ROM_ALLOW_FALLBACK);
-		if (ret) {
-			printf("failed to run video BIOS: %d\n", ret);
-			ret = -EIO;
-		}
+		ret = vbe_setup_video(dev, broadwell_igd_int15_handler);
+		if (ret)
+			debug("failed to run video BIOS: %d\n", ret);
 	}
 	if (!ret)
 		ret = igd_post_init(dev, is_broadwell);
@@ -697,13 +686,8 @@ static int broadwell_igd_probe(struct udevice *dev)
 	if (ret)
 		return ret;
 
-	if (vbe_get_video_info(gdev)) {
-		printf("No video mode configured\n");
-		return -ENXIO;
-	}
-
-	/* Use write-through for the graphics memory, 256MB */
-	ret = mtrr_add_request(MTRR_TYPE_WRTHROUGH, gdev->pciBase, 256 << 20);
+	/* Use write-combining for the graphics memory, 256MB */
+	ret = mtrr_add_request(MTRR_TYPE_WRCOMB, plat->base, 256 << 20);
 	if (!ret)
 		ret = mtrr_commit(true);
 	if (ret && ret != -ENOSYS) {
@@ -711,17 +695,8 @@ static int broadwell_igd_probe(struct udevice *dev)
 		       ret);
 	}
 
-	bits_per_pixel = gdev->gdfBytesPP * 8;
-	sprintf(gdev->modeIdent, "%dx%dx%d", gdev->winSizeX, gdev->winSizeY,
-		bits_per_pixel);
-	printf("%s\n", gdev->modeIdent);
-	uc_priv->xsize = gdev->winSizeX;
-	uc_priv->ysize = gdev->winSizeY;
-	uc_priv->bpix = ilog2(bits_per_pixel);
-	plat->base = gdev->pciBase;
-	plat->size = gdev->memSize;
-	debug("fb=%x, size %x, display size=%d %d %d\n", gdev->pciBase,
-	      gdev->memSize, uc_priv->xsize, uc_priv->ysize, uc_priv->bpix);
+	debug("fb=%lx, size %x, display size=%d %d %d\n", plat->base,
+	      plat->size, uc_priv->xsize, uc_priv->ysize, uc_priv->bpix);
 
 	return 0;
 }
diff --git a/drivers/video/coreboot.c b/drivers/video/coreboot.c
new file mode 100644
index 0000000..3a94aa1
--- /dev/null
+++ b/drivers/video/coreboot.c
@@ -0,0 +1,79 @@
+/*
+ * Copyright (C) 2016, Bin Meng <bmeng.cn@gmail.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <vbe.h>
+#include <video.h>
+#include <asm/arch/sysinfo.h>
+
+static int save_vesa_mode(struct cb_framebuffer *fb,
+			  struct vesa_mode_info *vesa)
+{
+	/*
+	 * If there is no framebuffer structure, bail out and keep
+	 * running on the serial console.
+	 */
+	if (!fb)
+		return -ENXIO;
+
+	vesa->x_resolution = fb->x_resolution;
+	vesa->y_resolution = fb->y_resolution;
+	vesa->bits_per_pixel = fb->bits_per_pixel;
+	vesa->bytes_per_scanline = fb->bytes_per_line;
+	vesa->phys_base_ptr = fb->physical_address;
+	vesa->red_mask_size = fb->red_mask_size;
+	vesa->red_mask_pos = fb->red_mask_pos;
+	vesa->green_mask_size = fb->green_mask_size;
+	vesa->green_mask_pos = fb->green_mask_pos;
+	vesa->blue_mask_size = fb->blue_mask_size;
+	vesa->blue_mask_pos = fb->blue_mask_pos;
+	vesa->reserved_mask_size = fb->reserved_mask_size;
+	vesa->reserved_mask_pos = fb->reserved_mask_pos;
+
+	return 0;
+}
+
+static int coreboot_video_probe(struct udevice *dev)
+{
+	struct video_uc_platdata *plat = dev_get_uclass_platdata(dev);
+	struct video_priv *uc_priv = dev_get_uclass_priv(dev);
+	struct cb_framebuffer *fb = lib_sysinfo.framebuffer;
+	struct vesa_mode_info *vesa = &mode_info.vesa;
+	int ret;
+
+	printf("Video: ");
+
+	/* Initialize vesa_mode_info structure */
+	ret = save_vesa_mode(fb, vesa);
+	if (ret)
+		goto err;
+
+	ret = vbe_setup_video_priv(vesa, uc_priv, plat);
+	if (ret)
+		goto err;
+
+	printf("%dx%dx%d\n", uc_priv->xsize, uc_priv->ysize,
+	       vesa->bits_per_pixel);
+
+	return 0;
+
+err:
+	printf("No video mode configured in coreboot!\n");
+	return ret;
+}
+
+static const struct udevice_id coreboot_video_ids[] = {
+	{ .compatible = "coreboot-fb" },
+	{ }
+};
+
+U_BOOT_DRIVER(coreboot_video) = {
+	.name	= "coreboot_video",
+	.id	= UCLASS_VIDEO,
+	.of_match = coreboot_video_ids,
+	.probe	= coreboot_video_probe,
+};
diff --git a/drivers/video/coreboot_fb.c b/drivers/video/coreboot_fb.c
deleted file mode 100644
index feb5463..0000000
--- a/drivers/video/coreboot_fb.c
+++ /dev/null
@@ -1,108 +0,0 @@
-/*
- * coreboot Framebuffer driver.
- *
- * Copyright (C) 2011 The Chromium OS authors
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/arch/sysinfo.h>
-#include <vbe.h>
-#include <video_fb.h>
-#include "videomodes.h"
-
-/*
- * The Graphic Device
- */
-GraphicDevice ctfb;
-
-static void save_vesa_mode(void)
-{
-	struct vesa_mode_info *vesa = &mode_info.vesa;
-	struct cb_framebuffer *fb = lib_sysinfo.framebuffer;
-
-	vesa->x_resolution = fb->x_resolution;
-	vesa->y_resolution = fb->y_resolution;
-	vesa->bits_per_pixel = fb->bits_per_pixel;
-	vesa->bytes_per_scanline = fb->bytes_per_line;
-	vesa->phys_base_ptr = fb->physical_address;
-	vesa->red_mask_size = fb->red_mask_size;
-	vesa->red_mask_pos = fb->red_mask_pos;
-	vesa->green_mask_size = fb->green_mask_size;
-	vesa->green_mask_pos = fb->green_mask_pos;
-	vesa->blue_mask_size = fb->blue_mask_size;
-	vesa->blue_mask_pos = fb->blue_mask_pos;
-	vesa->reserved_mask_size = fb->reserved_mask_size;
-	vesa->reserved_mask_pos = fb->reserved_mask_pos;
-}
-
-static int parse_coreboot_table_fb(GraphicDevice *gdev)
-{
-	struct cb_framebuffer *fb = lib_sysinfo.framebuffer;
-
-	/* If there is no framebuffer structure, bail out and keep
-	 * running on the serial console.
-	 */
-	if (!fb)
-		return 0;
-
-	gdev->winSizeX = fb->x_resolution;
-	gdev->winSizeY = fb->y_resolution;
-
-	gdev->plnSizeX = fb->x_resolution;
-	gdev->plnSizeY = fb->y_resolution;
-
-	gdev->gdfBytesPP = fb->bits_per_pixel / 8;
-
-	switch (fb->bits_per_pixel) {
-	case 24:
-		gdev->gdfIndex = GDF_32BIT_X888RGB;
-		break;
-	case 16:
-		gdev->gdfIndex = GDF_16BIT_565RGB;
-		break;
-	default:
-		gdev->gdfIndex = GDF__8BIT_INDEX;
-		break;
-	}
-
-	gdev->isaBase = CONFIG_SYS_ISA_IO_BASE_ADDRESS;
-	gdev->pciBase = (unsigned int)fb->physical_address;
-
-	gdev->frameAdrs = (unsigned int)fb->physical_address;
-	gdev->memSize = fb->bytes_per_line * fb->y_resolution;
-
-	gdev->vprBase = (unsigned int)fb->physical_address;
-	gdev->cprBase = (unsigned int)fb->physical_address;
-
-	return 1;
-}
-
-void *video_hw_init(void)
-{
-	GraphicDevice *gdev = &ctfb;
-	int bits_per_pixel;
-
-	printf("Video: ");
-
-	if (!parse_coreboot_table_fb(gdev)) {
-		printf("No video mode configured in coreboot!\n");
-		return NULL;
-	}
-
-	bits_per_pixel = gdev->gdfBytesPP * 8;
-
-	/* fill in Graphic device struct */
-	sprintf(gdev->modeIdent, "%dx%dx%d", gdev->winSizeX, gdev->winSizeY,
-		 bits_per_pixel);
-	printf("%s\n", gdev->modeIdent);
-
-	memset((void *)gdev->pciBase, 0,
-		gdev->winSizeX * gdev->winSizeY * gdev->gdfBytesPP);
-
-	/* Initialize vesa_mode_info structure */
-	save_vesa_mode();
-
-	return (void *)gdev;
-}
diff --git a/arch/x86/cpu/ivybridge/gma.c b/drivers/video/ivybridge_igd.c
index 37e2e6e..94db3dd 100644
--- a/arch/x86/cpu/ivybridge/gma.c
+++ b/drivers/video/ivybridge_igd.c
@@ -1,7 +1,5 @@
 /*
- * From Coreboot file of the same name
- *
- * Copyright (C) 2011 Chromium OS Authors
+ * Copyright (C) 2016 Google, Inc
  *
  * SPDX-License-Identifier:	GPL-2.0
  */
@@ -12,6 +10,7 @@
 #include <errno.h>
 #include <fdtdec.h>
 #include <pci_rom.h>
+#include <vbe.h>
 #include <asm/intel_regs.h>
 #include <asm/io.h>
 #include <asm/mtrr.h>
@@ -24,6 +23,7 @@ struct gt_powermeter {
 	u32 value;
 };
 
+/* These are magic values - unfortunately the meaning is unknown */
 static const struct gt_powermeter snb_pm_gt1[] = {
 	{ 0xa200, 0xcc000000 },
 	{ 0xa204, 0x07000040 },
@@ -294,33 +294,6 @@ static const struct gt_powermeter ivb_pm_gt2_35w[] = {
 	{ 0 }
 };
 
-/*
- * Some vga option roms are used for several chipsets but they only have one
- * PCI ID in their header. If we encounter such an option rom, we need to do
- * the mapping ourselves.
- */
-
-u32 map_oprom_vendev(u32 vendev)
-{
-	u32 new_vendev = vendev;
-
-	switch (vendev) {
-	case 0x80860102:		/* GT1 Desktop */
-	case 0x8086010a:		/* GT1 Server */
-	case 0x80860112:		/* GT2 Desktop */
-	case 0x80860116:		/* GT2 Mobile */
-	case 0x80860122:		/* GT2 Desktop >=1.3GHz */
-	case 0x80860126:		/* GT2 Mobile >=1.3GHz */
-	case 0x80860156:		/* IVB */
-	case 0x80860166:		/* IVB */
-		/* Set to GT1 Mobile */
-		new_vendev = 0x80860106;
-		break;
-	}
-
-	return new_vendev;
-}
-
 static inline u32 gtt_read(void *bar, u32 reg)
 {
 	return readl(bar + reg);
@@ -539,7 +512,7 @@ static int gma_pm_init_pre_vbios(void *gtt_bar, int rev)
 	return 0;
 }
 
-int gma_pm_init_post_vbios(struct udevice *dev, int rev, void *gtt_bar)
+static int gma_pm_init_post_vbios(struct udevice *dev, int rev, void *gtt_bar)
 {
 	const void *blob = gd->fdt_blob;
 	int node = dev->of_offset;
@@ -731,7 +704,8 @@ static int int15_handler(void)
 	return res;
 }
 
-void sandybridge_setup_graphics(struct udevice *dev, struct udevice *video_dev)
+static void sandybridge_setup_graphics(struct udevice *dev,
+				       struct udevice *video_dev)
 {
 	u32 reg32;
 	u16 reg16;
@@ -797,11 +771,8 @@ void sandybridge_setup_graphics(struct udevice *dev, struct udevice *video_dev)
 	writel(reg32, MCHBAR_REG(0x5418));
 }
 
-int gma_func0_init(struct udevice *dev)
+static int gma_func0_init(struct udevice *dev)
 {
-#ifdef CONFIG_VIDEO
-	ulong start;
-#endif
 	struct udevice *nbridge;
 	void *gtt_bar;
 	ulong base;
@@ -835,16 +806,38 @@ int gma_func0_init(struct udevice *dev)
 	if (ret)
 		return ret;
 
-#ifdef CONFIG_VIDEO
-	start = get_timer(0);
-	ret = dm_pci_run_vga_bios(dev, int15_handler,
-				  PCI_ROM_USE_NATIVE | PCI_ROM_ALLOW_FALLBACK);
-	debug("BIOS ran in %lums\n", get_timer(start));
-#endif
+	return rev;
+}
+
+static int bd82x6x_video_probe(struct udevice *dev)
+{
+	void *gtt_bar;
+	int ret, rev;
+
+	rev = gma_func0_init(dev);
+	if (rev < 0)
+		return rev;
+	ret = vbe_setup_video(dev, int15_handler);
+	if (ret)
+		return ret;
+
 	/* Post VBIOS init */
+	gtt_bar = (void *)dm_pci_read_bar32(dev, 0);
 	ret = gma_pm_init_post_vbios(dev, rev, gtt_bar);
 	if (ret)
 		return ret;
 
 	return 0;
 }
+
+static const struct udevice_id bd82x6x_video_ids[] = {
+	{ .compatible = "intel,gma" },
+	{ }
+};
+
+U_BOOT_DRIVER(bd82x6x_video) = {
+	.name	= "bd82x6x_video",
+	.id	= UCLASS_VIDEO,
+	.of_match = bd82x6x_video_ids,
+	.probe	= bd82x6x_video_probe,
+};
diff --git a/drivers/video/vesa.c b/drivers/video/vesa.c
new file mode 100644
index 0000000..ddf8df8
--- /dev/null
+++ b/drivers/video/vesa.c
@@ -0,0 +1,34 @@
+/*
+ * Copyright (C) 2016, Bin Meng <bmeng.cn@gmail.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <pci.h>
+#include <vbe.h>
+
+static int vesa_video_probe(struct udevice *dev)
+{
+	return vbe_setup_video(dev, NULL);
+}
+
+static const struct udevice_id vesa_video_ids[] = {
+	{ .compatible = "vesa-fb" },
+	{ }
+};
+
+U_BOOT_DRIVER(vesa_video) = {
+	.name	= "vesa_video",
+	.id	= UCLASS_VIDEO,
+	.of_match = vesa_video_ids,
+	.probe	= vesa_video_probe,
+};
+
+static struct pci_device_id vesa_video_supported[] = {
+	{ PCI_DEVICE_CLASS(PCI_CLASS_DISPLAY_VGA << 8, ~0) },
+	{ },
+};
+
+U_BOOT_PCI_DEVICE(vesa_video, vesa_video_supported);
diff --git a/drivers/video/vesa_fb.c b/drivers/video/vesa_fb.c
deleted file mode 100644
index 021c1d6..0000000
--- a/drivers/video/vesa_fb.c
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * VESA frame buffer driver
- *
- * Copyright (C) 2014 Google, Inc
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <pci_rom.h>
-#include <video_fb.h>
-#include <vbe.h>
-
-/*
- * The Graphic Device
- */
-GraphicDevice ctfb;
-
-void *video_hw_init(void)
-{
-	GraphicDevice *gdev = &ctfb;
-	struct udevice *dev;
-	int bits_per_pixel;
-	int ret;
-
-	printf("Video: ");
-	if (!ll_boot_init()) {
-		/*
-		 * If we are running from EFI or coreboot, this driver can't
-		 * work.
-		 */
-		printf("Not available (previous bootloader prevents it)\n");
-		return NULL;
-	}
-	if (vbe_get_video_info(gdev)) {
-		ret = dm_pci_find_class(PCI_CLASS_DISPLAY_VGA << 8, 0, &dev);
-		if (ret) {
-			printf("no card detected\n");
-			return NULL;
-		}
-		bootstage_start(BOOTSTAGE_ID_ACCUM_LCD, "vesa display");
-		ret = dm_pci_run_vga_bios(dev, NULL, PCI_ROM_USE_NATIVE |
-					  PCI_ROM_ALLOW_FALLBACK);
-		bootstage_accum(BOOTSTAGE_ID_ACCUM_LCD);
-		if (ret) {
-			printf("failed to run video BIOS: %d\n", ret);
-			return NULL;
-		}
-	}
-
-	if (vbe_get_video_info(gdev)) {
-		printf("No video mode configured\n");
-		return NULL;
-	}
-
-	bits_per_pixel = gdev->gdfBytesPP * 8;
-	sprintf(gdev->modeIdent, "%dx%dx%d", gdev->winSizeX, gdev->winSizeY,
-		bits_per_pixel);
-	printf("%s\n", gdev->modeIdent);
-	debug("Frame buffer at %x\n", gdev->pciBase);
-
-	return (void *)gdev;
-}
diff --git a/drivers/video/video-uclass.c b/drivers/video/video-uclass.c
index b6dd0f5..11ca793 100644
--- a/drivers/video/video-uclass.c
+++ b/drivers/video/video-uclass.c
@@ -54,6 +54,9 @@ static ulong alloc_fb(struct udevice *dev, ulong *addrp)
 	struct video_uc_platdata *plat = dev_get_uclass_platdata(dev);
 	ulong base, align, size;
 
+	if (!plat->size)
+		return 0;
+
 	align = plat->align ? plat->align : 1 << 20;
 	base = *addrp - plat->size;
 	base &= ~(align - 1);
diff --git a/include/_exports.h b/include/_exports.h
index 1584705..6ff4364 100644
--- a/include/_exports.h
+++ b/include/_exports.h
@@ -13,7 +13,7 @@
 	EXPORT_FUNC(putc, void, putc, const char)
 	EXPORT_FUNC(puts, void, puts, const char *)
 	EXPORT_FUNC(printf, int, printf, const char*, ...)
-#if defined(CONFIG_X86) || defined(CONFIG_PPC)
+#if (defined(CONFIG_X86) && !defined(CONFIG_X86_64)) || defined(CONFIG_PPC)
 	EXPORT_FUNC(irq_install_handler, void, install_hdlr,
 		    int, interrupt_handler_t, void*)
 
diff --git a/include/asm-generic/sections.h b/include/asm-generic/sections.h
index 328bc62..d69bc60 100644
--- a/include/asm-generic/sections.h
+++ b/include/asm-generic/sections.h
@@ -82,6 +82,7 @@ extern ulong __data_end;
 extern ulong __rel_dyn_start;
 extern ulong __rel_dyn_end;
 extern ulong __bss_end;
+extern ulong _image_binary_end;
 
 extern ulong _TEXT_BASE;	/* code start */
 
diff --git a/include/configs/bayleybay.h b/include/configs/bayleybay.h
index 8f31436..40b13d1 100644
--- a/include/configs/bayleybay.h
+++ b/include/configs/bayleybay.h
@@ -18,9 +18,9 @@
 
 #define CONFIG_PCI_PNP
 
-#define CONFIG_STD_DEVICES_SETTINGS	"stdin=serial,vga,usbkbd\0" \
-					"stdout=serial,vga\0" \
-					"stderr=serial,vga\0"
+#define CONFIG_STD_DEVICES_SETTINGS	"stdin=serial,usbkbd\0" \
+					"stdout=serial,vidconsole\0" \
+					"stderr=serial,vidconsole\0"
 
 #define CONFIG_SCSI_DEV_LIST		\
 	{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_VALLEYVIEW_SATA}, \
diff --git a/include/configs/cougarcanyon2.h b/include/configs/cougarcanyon2.h
index 88845dc..d20ad96 100644
--- a/include/configs/cougarcanyon2.h
+++ b/include/configs/cougarcanyon2.h
@@ -27,8 +27,4 @@
 #define CONFIG_ENV_SECT_SIZE		0x1000
 #define CONFIG_ENV_OFFSET		0x5ff000
 
-/* Video is not supported for now */
-#undef CONFIG_VIDEO
-#undef CONFIG_CFB_CONSOLE
-
 #endif	/* __CONFIG_H */
diff --git a/include/configs/crownbay.h b/include/configs/crownbay.h
index 49ed3ef..64ad736 100644
--- a/include/configs/crownbay.h
+++ b/include/configs/crownbay.h
@@ -22,8 +22,8 @@
 #define CONFIG_PCI_PNP
 
 #define CONFIG_STD_DEVICES_SETTINGS	"stdin=serial,i8042-kbd,usbkbd\0" \
-					"stdout=serial,vga\0" \
-					"stderr=serial,vga\0"
+					"stdout=serial,vidconsole\0" \
+					"stderr=serial,vidconsole\0"
 
 #define CONFIG_SCSI_DEV_LIST		\
 	{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TCF_SATA}
diff --git a/include/configs/efi-x86.h b/include/configs/efi-x86.h
index 95e46c5..5626061 100644
--- a/include/configs/efi-x86.h
+++ b/include/configs/efi-x86.h
@@ -15,8 +15,6 @@
 
 #undef CONFIG_ENV_IS_IN_SPI_FLASH
 #define CONFIG_ENV_IS_NOWHERE
-#undef CONFIG_VIDEO
-#undef CONFIG_CFB_CONSOLE
 #undef CONFIG_SCSI_AHCI
 #undef CONFIG_SCSI
 #undef CONFIG_INTEL_ICH6_GPIO
diff --git a/include/configs/galileo.h b/include/configs/galileo.h
index 40f7fba..034142c 100644
--- a/include/configs/galileo.h
+++ b/include/configs/galileo.h
@@ -31,10 +31,6 @@
 #undef CONFIG_SCSI_AHCI
 #undef CONFIG_SCSI
 
-/* Video is not supported in Quark SoC */
-#undef CONFIG_VIDEO
-#undef CONFIG_CFB_CONSOLE
-
 /* SD/MMC support */
 #define CONFIG_MMC
 #define CONFIG_SDHCI
diff --git a/include/configs/minnowmax.h b/include/configs/minnowmax.h
index 95ad128..935c88d 100644
--- a/include/configs/minnowmax.h
+++ b/include/configs/minnowmax.h
@@ -20,9 +20,9 @@
 #define CONFIG_SMSC_LPC47M
 
 #define CONFIG_PCI_PNP
-#define CONFIG_STD_DEVICES_SETTINGS     "stdin=usbkbd,vga,serial\0" \
-					"stdout=vga,serial\0" \
-					"stderr=vga,serial\0"
+#define CONFIG_STD_DEVICES_SETTINGS	"stdin=usbkbd,serial\0" \
+					"stdout=vidconsole,serial\0" \
+					"stderr=vidconsole,serial\0"
 
 #define CONFIG_SCSI_DEV_LIST		\
 	{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_VALLEYVIEW_SATA}, \
diff --git a/include/configs/qemu-x86.h b/include/configs/qemu-x86.h
index 476d37d..a2dd79b 100644
--- a/include/configs/qemu-x86.h
+++ b/include/configs/qemu-x86.h
@@ -19,8 +19,8 @@
 #define CONFIG_PCI_PNP
 
 #define CONFIG_STD_DEVICES_SETTINGS	"stdin=serial,i8042-kbd\0" \
-					"stdout=serial,vga\0" \
-					"stderr=serial,vga\0"
+					"stdout=serial,vidconsole\0" \
+					"stderr=serial,vidconsole\0"
 
 /*
  * ATA/SATA support for QEMU x86 targets
diff --git a/include/configs/som-6896.h b/include/configs/som-6896.h
index 43a9623..d058603 100644
--- a/include/configs/som-6896.h
+++ b/include/configs/som-6896.h
@@ -27,9 +27,9 @@
 
 #define CONFIG_ARCH_EARLY_INIT_R
 
-#define CONFIG_STD_DEVICES_SETTINGS     "stdin=serial,vga,usbkbd\0" \
-					"stdout=serial,vga\0" \
-					"stderr=serial,vga\0"
+#define CONFIG_STD_DEVICES_SETTINGS	"stdin=serial,usbkbd\0" \
+					"stdout=serial,vidconsole\0" \
+					"stderr=serial,vidconsole\0"
 
 #define CONFIG_ENV_SECT_SIZE		0x1000
 #define CONFIG_ENV_OFFSET		0x00ff0000
diff --git a/include/configs/som-db5800-som-6867.h b/include/configs/som-db5800-som-6867.h
index a4b343e..a13be14 100644
--- a/include/configs/som-db5800-som-6867.h
+++ b/include/configs/som-db5800-som-6867.h
@@ -19,9 +19,9 @@
 #define CONFIG_ARCH_MISC_INIT
 
 #define CONFIG_PCI_PNP
-#define CONFIG_STD_DEVICES_SETTINGS     "stdin=serial,usbkbd,vga\0" \
-					"stdout=serial,vga\0" \
-					"stderr=serial,vga\0"
+#define CONFIG_STD_DEVICES_SETTINGS	"stdin=serial,usbkbd\0" \
+					"stdout=serial,vidconsole\0" \
+					"stderr=serial,vidconsole\0"
 
 #define CONFIG_SCSI_DEV_LIST		\
 	{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_VALLEYVIEW_SATA}, \
diff --git a/include/configs/x86-chromebook.h b/include/configs/x86-chromebook.h
index 312987e..4bcebfc 100644
--- a/include/configs/x86-chromebook.h
+++ b/include/configs/x86-chromebook.h
@@ -53,8 +53,8 @@
 
 #define CONFIG_SYS_WHITE_ON_BLACK
 
-#define CONFIG_STD_DEVICES_SETTINGS     "stdin=usbkbd,i8042-kbd,serial\0" \
-					"stdout=vga,serial\0" \
-					"stderr=vga,serial\0"
+#define CONFIG_STD_DEVICES_SETTINGS	"stdin=usbkbd,i8042-kbd,serial\0" \
+					"stdout=vidconsole,serial\0" \
+					"stderr=vidconsole,serial\0"
 
 #endif
diff --git a/include/configs/x86-common.h b/include/configs/x86-common.h
index 7803aea..a286f05 100644
--- a/include/configs/x86-common.h
+++ b/include/configs/x86-common.h
@@ -130,11 +130,6 @@
 /*-----------------------------------------------------------------------
  * Video Configuration
  */
-#define CONFIG_VIDEO
-#define CONFIG_VIDEO_SW_CURSOR
-#define VIDEO_FB_16BPP_WORD_SWAP
-#define CONFIG_VGA_AS_SINGLE_DEVICE
-#define CONFIG_CFB_CONSOLE
 #define CONFIG_CONSOLE_SCROLL_LINES 5
 
 /*-----------------------------------------------------------------------
diff --git a/include/dm/uclass.h b/include/dm/uclass.h
index 84f05bc..b583aa8 100644
--- a/include/dm/uclass.h
+++ b/include/dm/uclass.h
@@ -119,6 +119,14 @@ struct uclass_driver {
 int uclass_get(enum uclass_id key, struct uclass **ucp);
 
 /**
+ * uclass_get_name() - Get the name of a uclass driver
+ *
+ * @id: ID to look up
+ * @returns the name of the uclass driver for that ID, or NULL if none
+ */
+const char *uclass_get_name(enum uclass_id id);
+
+/**
  * uclass_get_device() - Get a uclass device based on an ID and index
  *
  * The device is probed to activate it ready for use.
diff --git a/include/elf.h b/include/elf.h
index a35e085..bcc5eb7 100644
--- a/include/elf.h
+++ b/include/elf.h
@@ -394,6 +394,12 @@ typedef struct {
 	Elf64_Xword r_info;	/* index and type of relocation */
 } Elf64_Rel;
 
+typedef struct {
+	Elf64_Addr r_offset;    /* Location at which to apply the action */
+	Elf64_Xword r_info;     /* index and type of relocation */
+	Elf64_Sxword r_addend;  /* Constant addend used to compute value */
+} Elf64_Rela;
+
 /* Extract relocation info - r_info */
 #define ELF32_R_SYM(i)		((i) >> 8)
 #define ELF32_R_TYPE(i)		((unsigned char) (i))
diff --git a/include/linux/list.h b/include/linux/list.h
index b78851c..5b8d1df 100644
--- a/include/linux/list.h
+++ b/include/linux/list.h
@@ -338,6 +338,17 @@ static inline void list_splice_tail_init(struct list_head *list,
 	list_entry((ptr)->next, type, member)
 
 /**
+ * list_last_entry - get the last element from a list
+ * @ptr:	the list head to take the element from.
+ * @type:	the type of the struct this is embedded in.
+ * @member:	the name of the list_struct within the struct.
+ *
+ * Note, that list is expected to be not empty.
+ */
+#define list_last_entry(ptr, type, member) \
+	list_entry((ptr)->prev, type, member)
+
+/**
  * list_for_each	-	iterate over a list
  * @pos:	the &struct list_head to use as a loop cursor.
  * @head:	the head for your list.
diff --git a/include/pci_ids.h b/include/pci_ids.h
index 17a01a0..ab6aa58 100644
--- a/include/pci_ids.h
+++ b/include/pci_ids.h
@@ -2599,13 +2599,14 @@
 #define PCI_DEVICE_ID_INTEL_I960	0x0960
 #define PCI_DEVICE_ID_INTEL_I960RM	0x0962
 #define PCI_DEVICE_ID_INTEL_CENTERTON_ILB	0x0c60
-#define PCI_DEVICE_ID_INTEL_VALLEYVIEW_SDIO	0x0f15
-#define PCI_DEVICE_ID_INTEL_VALLEYVIEW_SDCARD	0x0f16
+#define PCI_DEVICE_ID_INTEL_BYT_SDIO		0x0f15
+#define PCI_DEVICE_ID_INTEL_BYT_SD		0x0f16
 #define PCI_DEVICE_ID_INTEL_VALLEYVIEW_LPC	0x0f1c
 #define PCI_DEVICE_ID_INTEL_VALLEYVIEW_IDE	0x0f20
 #define PCI_DEVICE_ID_INTEL_VALLEYVIEW_IDE_ALT	0x0f21
 #define PCI_DEVICE_ID_INTEL_VALLEYVIEW_SATA	0x0f22
 #define PCI_DEVICE_ID_INTEL_VALLEYVIEW_SATA_ALT	0x0f23
+#define PCI_DEVICE_ID_INTEL_BYT_EMMC2	0x0f50
 #define PCI_DEVICE_ID_INTEL_82541ER	0x1078
 #define PCI_DEVICE_ID_INTEL_82541GI_LF	0x107c
 #define PCI_DEVICE_ID_INTEL_82542	0x1000
diff --git a/include/vbe.h b/include/vbe.h
index 164ccae..16bb096 100644
--- a/include/vbe.h
+++ b/include/vbe.h
@@ -106,5 +106,11 @@ extern struct vbe_mode_info mode_info;
 
 struct graphic_device;
 int vbe_get_video_info(struct graphic_device *gdev);
+struct video_priv;
+struct video_uc_platdata;
+int vbe_setup_video_priv(struct vesa_mode_info *vesa,
+			 struct video_priv *uc_priv,
+			 struct video_uc_platdata *plat);
+int vbe_setup_video(struct udevice *dev, int (*int15_handler)(void));
 
 #endif
diff --git a/lib/strto.c b/lib/strto.c
index a6c0157..e93a4f5 100644
--- a/lib/strto.c
+++ b/lib/strto.c
@@ -160,9 +160,11 @@ long trailing_strtoln(const char *str, const char *end)
 
 	if (!end)
 		end = str + strlen(str);
-	for (p = end - 1; p > str; p--) {
-		if (!isdigit(*p))
-			return simple_strtoul(p + 1, NULL, 10);
+	if (isdigit(end[-1])) {
+		for (p = end - 1; p > str; p--) {
+			if (!isdigit(*p))
+				return simple_strtoul(p + 1, NULL, 10);
+		}
 	}
 
 	return -1;