diff options
author | TsiChungLiew <Tsi-Chung.Liew@freescale.com> | 2007-08-16 00:21:21 (GMT) |
---|---|---|
committer | John Rigby <jrigby@freescale.com> | 2007-08-16 23:43:20 (GMT) |
commit | 83ec20bc4380eebddfde45da6e3a69a92d4db21d (patch) | |
tree | 57cbcef9eb99d47da3812cc43b34a97c9c27edd1 | |
parent | f52e78304dcc0ac459c0ea1fa5be275c7d1642cf (diff) | |
download | u-boot-83ec20bc4380eebddfde45da6e3a69a92d4db21d.tar.xz |
ColdFire: MCF52x2 update
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
-rw-r--r-- | cpu/mcf52x2/Makefile | 4 | ||||
-rw-r--r-- | cpu/mcf52x2/cpu.c | 154 | ||||
-rw-r--r-- | cpu/mcf52x2/cpu_init.c | 382 | ||||
-rw-r--r-- | cpu/mcf52x2/fec.c | 605 | ||||
-rw-r--r-- | cpu/mcf52x2/interrupts.c | 183 | ||||
-rw-r--r-- | cpu/mcf52x2/serial.c | 215 | ||||
-rw-r--r-- | cpu/mcf52x2/start.S | 48 | ||||
-rw-r--r-- | lib_m68k/time.c | 276 |
8 files changed, 369 insertions, 1498 deletions
diff --git a/cpu/mcf52x2/Makefile b/cpu/mcf52x2/Makefile index 70d57cf..937cdd0 100644 --- a/cpu/mcf52x2/Makefile +++ b/cpu/mcf52x2/Makefile @@ -27,8 +27,8 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(CPU).a -START = -COBJS = serial.o interrupts.o cpu.o speed.o cpu_init.o fec.o +START = start.o +COBJS = interrupts.o cpu.o speed.o cpu_init.o SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) diff --git a/cpu/mcf52x2/cpu.c b/cpu/mcf52x2/cpu.c index ce59d39..96fe371 100644 --- a/cpu/mcf52x2/cpu.c +++ b/cpu/mcf52x2/cpu.c @@ -28,33 +28,15 @@ #include <common.h> #include <watchdog.h> #include <command.h> +#include <asm/immap.h> #ifdef CONFIG_M5271 -#include <asm/immap_5271.h> -#include <asm/m5271.h> -#endif - -#ifdef CONFIG_M5272 -#include <asm/immap_5272.h> -#include <asm/m5272.h> -#endif - -#ifdef CONFIG_M5282 -#include <asm/m5282.h> -#include <asm/immap_5282.h> -#endif - -#ifdef CONFIG_M5249 -#include <asm/m5249.h> -#endif - -#ifdef CONFIG_M5271 /* * Both MCF5270 and MCF5271 are members of the MPC5271 family. Try to * determine which one we are running on, based on the Chip Identification * Register (CIR). */ -int checkcpu (void) +int checkcpu(void) { char buf[32]; unsigned short cir; /* Chip Identification Register */ @@ -80,156 +62,164 @@ int checkcpu (void) if (cpu_model) printf("CPU: Freescale ColdFire MCF%s rev. %hu, at %s MHz\n", - cpu_model, prn, strmhz(buf, CFG_CLK)); + cpu_model, prn, strmhz(buf, CFG_CLK)); else printf("CPU: Unknown - Freescale ColdFire MCF5271 family" - " (PIN: 0x%x) rev. %hu, at %s MHz\n", - pin, prn, strmhz(buf, CFG_CLK)); + " (PIN: 0x%x) rev. %hu, at %s MHz\n", + pin, prn, strmhz(buf, CFG_CLK)); return 0; } -int do_reset (cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char *argv[]) { +int do_reset(cmd_tbl_t * cmdtp, bd_t * bd, int flag, int argc, char *argv[]) +{ mbar_writeByte(MCF_RCM_RCR, - MCF_RCM_RCR_SOFTRST | MCF_RCM_RCR_FRCRSTOUT); + MCF_RCM_RCR_SOFTRST | MCF_RCM_RCR_FRCRSTOUT); return 0; }; #if defined(CONFIG_WATCHDOG) -void watchdog_reset (void) +void watchdog_reset(void) { mbar_writeShort(MCF_WTM_WSR, 0x5555); mbar_writeShort(MCF_WTM_WSR, 0xAAAA); } -int watchdog_disable (void) +int watchdog_disable(void) { mbar_writeShort(MCF_WTM_WCR, 0); return (0); } -int watchdog_init (void) +int watchdog_init(void) { mbar_writeShort(MCF_WTM_WCR, MCF_WTM_WCR_EN); return (0); } -#endif /* #ifdef CONFIG_WATCHDOG */ +#endif /* #ifdef CONFIG_WATCHDOG */ #endif #ifdef CONFIG_M5272 -int do_reset (cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char *argv[]) { - volatile wdog_t * wdp = (wdog_t *)(CFG_MBAR + MCFSIM_WRRR); +int do_reset(cmd_tbl_t * cmdtp, bd_t * bd, int flag, int argc, char *argv[]) +{ + volatile wdog_t *wdp = (wdog_t *) (MMAP_WDOG); wdp->wdog_wrrr = 0; - udelay (1000); + udelay(1000); /* enable watchdog, set timeout to 0 and wait */ wdp->wdog_wrrr = 1; - while (1); + while (1) ; /* we don't return! */ return 0; }; -int checkcpu(void) { - ulong *dirp = (ulong *)(CFG_MBAR + MCFSIM_DIR); +int checkcpu(void) +{ + volatile sysctrl_t *sysctrl = (sysctrl_t *) (MMAP_CFG); uchar msk; - char *suf; + char *suf; - puts ("CPU: "); - msk = (*dirp > 28) & 0xf; + puts("CPU: "); + msk = (sysctrl->sc_dir > 28) & 0xf; switch (msk) { - case 0x2: suf = "1K75N"; break; - case 0x4: suf = "3K75N"; break; - default: - suf = NULL; - printf ("Freescale MCF5272 (Mask:%01x)\n", msk); - break; - } + case 0x2: + suf = "1K75N"; + break; + case 0x4: + suf = "3K75N"; + break; + default: + suf = NULL; + printf("Freescale MCF5272 (Mask:%01x)\n", msk); + break; + } if (suf) - printf ("Freescale MCF5272 %s\n", suf); + printf("Freescale MCF5272 %s\n", suf); return 0; }; #if defined(CONFIG_WATCHDOG) /* Called by macro WATCHDOG_RESET */ -void watchdog_reset (void) +void watchdog_reset(void) { - volatile immap_t * regp = (volatile immap_t *)CFG_MBAR; - regp->wdog_reg.wdog_wcr = 0; + volatile wdog_t *wdt = (volatile wdog_t *)(MMAP_WDOG); + wdt->wdog_wcr = 0; } -int watchdog_disable (void) +int watchdog_disable(void) { - volatile immap_t *regp = (volatile immap_t *)CFG_MBAR; + volatile wdog_t *wdt = (volatile wdog_t *)(MMAP_WDOG); - regp->wdog_reg.wdog_wcr = 0; /* reset watchdog counter */ - regp->wdog_reg.wdog_wirr = 0; /* disable watchdog interrupt */ - regp->wdog_reg.wdog_wrrr = 0; /* disable watchdog timer */ + wdt->wdog_wcr = 0; /* reset watchdog counter */ + wdt->wdog_wirr = 0; /* disable watchdog interrupt */ + wdt->wdog_wrrr = 0; /* disable watchdog timer */ - puts ("WATCHDOG:disabled\n"); + puts("WATCHDOG:disabled\n"); return (0); } -int watchdog_init (void) +int watchdog_init(void) { - volatile immap_t *regp = (volatile immap_t *)CFG_MBAR; + volatile wdog_t *wdt = (volatile wdog_t *)(MMAP_WDOG); - regp->wdog_reg.wdog_wirr = 0; /* disable watchdog interrupt */ + wdt->wdog_wirr = 0; /* disable watchdog interrupt */ /* set timeout and enable watchdog */ - regp->wdog_reg.wdog_wrrr = ((CONFIG_WATCHDOG_TIMEOUT * CFG_HZ) / (32768 * 1000)) - 1; - regp->wdog_reg.wdog_wcr = 0; /* reset watchdog counter */ + wdt->wdog_wrrr = + ((CONFIG_WATCHDOG_TIMEOUT * CFG_HZ) / (32768 * 1000)) - 1; + wdt->wdog_wcr = 0; /* reset watchdog counter */ - puts ("WATCHDOG:enabled\n"); + puts("WATCHDOG:enabled\n"); return (0); } -#endif /* #ifdef CONFIG_WATCHDOG */ - -#endif /* #ifdef CONFIG_M5272 */ +#endif /* #ifdef CONFIG_WATCHDOG */ +#endif /* #ifdef CONFIG_M5272 */ #ifdef CONFIG_M5282 -int checkcpu (void) +int checkcpu(void) { unsigned char resetsource = MCFRESET_RSR; - printf ("CPU: Freescale Coldfire MCF5282 (PIN: %2.2x REV: %2.2x)\n", - MCFCCM_CIR>>8,MCFCCM_CIR & MCFCCM_CIR_PRN_MASK); - printf ("Reset:%s%s%s%s%s%s%s\n", - (resetsource & MCFRESET_RSR_LOL) ? " Loss of Lock" : "", - (resetsource & MCFRESET_RSR_LOC) ? " Loss of Clock" : "", - (resetsource & MCFRESET_RSR_EXT) ? " External" : "", - (resetsource & MCFRESET_RSR_POR) ? " Power On" : "", - (resetsource & MCFRESET_RSR_WDR) ? " Watchdog" : "", - (resetsource & MCFRESET_RSR_SOFT) ? " Software" : "", - (resetsource & MCFRESET_RSR_LVD) ? " Low Voltage" : "" - ); + printf("CPU: Freescale Coldfire MCF5282 (PIN: %2.2x REV: %2.2x)\n", + MCFCCM_CIR >> 8, MCFCCM_CIR & MCFCCM_CIR_PRN_MASK); + printf("Reset:%s%s%s%s%s%s%s\n", + (resetsource & MCFRESET_RSR_LOL) ? " Loss of Lock" : "", + (resetsource & MCFRESET_RSR_LOC) ? " Loss of Clock" : "", + (resetsource & MCFRESET_RSR_EXT) ? " External" : "", + (resetsource & MCFRESET_RSR_POR) ? " Power On" : "", + (resetsource & MCFRESET_RSR_WDR) ? " Watchdog" : "", + (resetsource & MCFRESET_RSR_SOFT) ? " Software" : "", + (resetsource & MCFRESET_RSR_LVD) ? " Low Voltage" : ""); return 0; } -int do_reset (cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char *argv[]) +int do_reset(cmd_tbl_t * cmdtp, bd_t * bd, int flag, int argc, char *argv[]) { MCFRESET_RCR = MCFRESET_RCR_SOFTRST; return 0; }; #endif -#ifdef CONFIG_M5249 /* test-only: todo... */ -int checkcpu (void) +#ifdef CONFIG_M5249 /* test-only: todo... */ +int checkcpu(void) { char buf[32]; - printf ("CPU: Freescale Coldfire MCF5249 at %s MHz\n", strmhz(buf, CFG_CLK)); + printf("CPU: Freescale Coldfire MCF5249 at %s MHz\n", + strmhz(buf, CFG_CLK)); return 0; } -int do_reset (cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char *argv[]) { +int do_reset(cmd_tbl_t * cmdtp, bd_t * bd, int flag, int argc, char *argv[]) +{ /* enable watchdog, set timeout to 0 and wait */ mbar_writeByte(MCFSIM_SYPCR, 0xc0); - while (1); + while (1) ; /* we don't return! */ return 0; diff --git a/cpu/mcf52x2/cpu_init.c b/cpu/mcf52x2/cpu_init.c index 1748ea9..5736d0f 100644 --- a/cpu/mcf52x2/cpu_init.c +++ b/cpu/mcf52x2/cpu_init.c @@ -27,28 +27,10 @@ #include <common.h> #include <watchdog.h> - -#ifdef CONFIG_M5271 -#include <asm/m5271.h> -#include <asm/immap_5271.h> -#endif - -#ifdef CONFIG_M5272 -#include <asm/m5272.h> -#include <asm/immap_5272.h> -#endif - -#ifdef CONFIG_M5282 -#include <asm/m5282.h> -#include <asm/immap_5282.h> -#endif - -#ifdef CONFIG_M5249 -#include <asm/m5249.h> -#endif +#include <asm/immap.h> #if defined(CONFIG_M5271) -void cpu_init_f (void) +void cpu_init_f(void) { #ifndef CONFIG_WATCHDOG /* Disable the watchdog if we aren't using it */ @@ -58,25 +40,35 @@ void cpu_init_f (void) /* Set clockspeed to 100MHz */ mbar_writeShort(MCF_FMPLL_SYNCR, MCF_FMPLL_SYNCR_MFD(0) | MCF_FMPLL_SYNCR_RFD(0)); - while (!mbar_readByte(MCF_FMPLL_SYNSR) & MCF_FMPLL_SYNSR_LOCK); - - /* Enable UART pins */ - mbar_writeShort(MCF_GPIO_PAR_UART, MCF_GPIO_PAR_UART_U0TXD | - MCF_GPIO_PAR_UART_U0RXD | - MCF_GPIO_PAR_UART_U1RXD_UART1 | - MCF_GPIO_PAR_UART_U1TXD_UART1); - - /* Enable Ethernet pins */ - mbar_writeByte(MCF_GPIO_PAR_FECI2C, CFG_FECI2C); + while (!mbar_readByte(MCF_FMPLL_SYNSR) & MCF_FMPLL_SYNSR_LOCK) ; } /* * initialize higher level parts of CPU like timers */ -int cpu_init_r (void) +int cpu_init_r(void) { return (0); } + +void uart_port_conf(void) +{ + /* Setup Ports: */ + switch (CFG_UART_PORT) { + case 0: + mbar_writeShort(MCF_GPIO_PAR_UART, MCF_GPIO_PAR_UART_U0TXD | + MCF_GPIO_PAR_UART_U0RXD); + break; + case 1: + mbar_writeShort(MCF_GPIO_PAR_UART, + MCF_GPIO_PAR_UART_U1RXD_UART1 | + MCF_GPIO_PAR_UART_U1TXD_UART1); + break; + case 2: + mbar_writeShort(MCF_GPIO_PAR_UART, 0x3000); + break; + } +} #endif #if defined(CONFIG_M5272) @@ -87,69 +79,68 @@ int cpu_init_r (void) * initialize a bunch of registers, * initialize the UPM's */ -void cpu_init_f (void) +void cpu_init_f(void) { /* if we come from RAM we assume the CPU is * already initialized. */ #ifndef CONFIG_MONITOR_IS_IN_RAM - volatile immap_t *regp = (immap_t *)CFG_MBAR; - - volatile unsigned char *mbar; - mbar = (volatile unsigned char *) CFG_MBAR; + volatile sysctrl_t *sysctrl = (sysctrl_t *) (CFG_MBAR); + volatile gpio_t *gpio = (gpio_t *) (MMAP_GPIO); + volatile csctrl_t *csctrl = (csctrl_t *) (MMAP_FBCS); - regp->sysctrl_reg.sc_scr = CFG_SCR; - regp->sysctrl_reg.sc_spr = CFG_SPR; + sysctrl->sc_scr = CFG_SCR; + sysctrl->sc_spr = CFG_SPR; /* Setup Ports: */ - regp->gpio_reg.gpio_pacnt = CFG_PACNT; - regp->gpio_reg.gpio_paddr = CFG_PADDR; - regp->gpio_reg.gpio_padat = CFG_PADAT; - regp->gpio_reg.gpio_pbcnt = CFG_PBCNT; - regp->gpio_reg.gpio_pbddr = CFG_PBDDR; - regp->gpio_reg.gpio_pbdat = CFG_PBDAT; - regp->gpio_reg.gpio_pdcnt = CFG_PDCNT; + gpio->gpio_pacnt = CFG_PACNT; + gpio->gpio_paddr = CFG_PADDR; + gpio->gpio_padat = CFG_PADAT; + gpio->gpio_pbcnt = CFG_PBCNT; + gpio->gpio_pbddr = CFG_PBDDR; + gpio->gpio_pbdat = CFG_PBDAT; + gpio->gpio_pdcnt = CFG_PDCNT; /* Memory Controller: */ - regp->csctrl_reg.cs_br0 = CFG_BR0_PRELIM; - regp->csctrl_reg.cs_or0 = CFG_OR0_PRELIM; + csctrl->cs_br0 = CFG_BR0_PRELIM; + csctrl->cs_or0 = CFG_OR0_PRELIM; #if (defined(CFG_OR1_PRELIM) && defined(CFG_BR1_PRELIM)) - regp->csctrl_reg.cs_br1 = CFG_BR1_PRELIM; - regp->csctrl_reg.cs_or1 = CFG_OR1_PRELIM; + csctrl->cs_br1 = CFG_BR1_PRELIM; + csctrl->cs_or1 = CFG_OR1_PRELIM; #endif #if defined(CFG_OR2_PRELIM) && defined(CFG_BR2_PRELIM) - regp->csctrl_reg.cs_br2 = CFG_BR2_PRELIM; - regp->csctrl_reg.cs_or2 = CFG_OR2_PRELIM; + csctrl->cs_br2 = CFG_BR2_PRELIM; + csctrl->cs_or2 = CFG_OR2_PRELIM; #endif #if defined(CFG_OR3_PRELIM) && defined(CFG_BR3_PRELIM) - regp->csctrl_reg.cs_br3 = CFG_BR3_PRELIM; - regp->csctrl_reg.cs_or3 = CFG_OR3_PRELIM; + csctrl->cs_br3 = CFG_BR3_PRELIM; + csctrl->cs_or3 = CFG_OR3_PRELIM; #endif #if defined(CFG_OR4_PRELIM) && defined(CFG_BR4_PRELIM) - regp->csctrl_reg.cs_br4 = CFG_BR4_PRELIM; - regp->csctrl_reg.cs_or4 = CFG_OR4_PRELIM; + csctrl->cs_br4 = CFG_BR4_PRELIM; + csctrl->cs_or4 = CFG_OR4_PRELIM; #endif #if defined(CFG_OR5_PRELIM) && defined(CFG_BR5_PRELIM) - regp->csctrl_reg.cs_br5 = CFG_BR5_PRELIM; - regp->csctrl_reg.cs_or5 = CFG_OR5_PRELIM; + csctrl->cs_br5 = CFG_BR5_PRELIM; + csctrl->cs_or5 = CFG_OR5_PRELIM; #endif #if defined(CFG_OR6_PRELIM) && defined(CFG_BR6_PRELIM) - regp->csctrl_reg.cs_br6 = CFG_BR6_PRELIM; - regp->csctrl_reg.cs_or6 = CFG_OR6_PRELIM; + csctrl->cs_br6 = CFG_BR6_PRELIM; + csctrl->cs_or6 = CFG_OR6_PRELIM; #endif #if defined(CFG_OR7_PRELIM) && defined(CFG_BR7_PRELIM) - regp->csctrl_reg.cs_br7 = CFG_BR7_PRELIM; - regp->csctrl_reg.cs_or7 = CFG_OR7_PRELIM; + csctrl->cs_br7 = CFG_BR7_PRELIM; + csctrl->cs_or7 = CFG_OR7_PRELIM; #endif -#endif /* #ifndef CONFIG_MONITOR_IS_IN_RAM */ +#endif /* #ifndef CONFIG_MONITOR_IS_IN_RAM */ /* enable instruction cache now */ icache_enable(); @@ -159,14 +150,30 @@ void cpu_init_f (void) /* * initialize higher level parts of CPU like timers */ -int cpu_init_r (void) +int cpu_init_r(void) { return (0); } -#endif /* #if defined(CONFIG_M5272) */ +void uart_port_conf(void) +{ + volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; + + /* Setup Ports: */ + switch (CFG_UART_PORT) { + case 0: + gpio->gpio_pbcnt &= ~(GPIO_PBCNT_PB0MSK | GPIO_PBCNT_PB1MSK); + gpio->gpio_pbcnt |= (GPIO_PBCNT_URT0_TXD | GPIO_PBCNT_URT0_RXD); + break; + case 1: + gpio->gpio_pdcnt &= ~(GPIO_PDCNT_PD1MSK | GPIO_PDCNT_PD4MSK); + gpio->gpio_pdcnt |= (GPIO_PDCNT_URT1_RXD | GPIO_PDCNT_URT1_TXD); + break; + } +} +#endif /* #if defined(CONFIG_M5272) */ -#ifdef CONFIG_M5282 +#if defined(CONFIG_M5282) /* * Breath some life into the CPU... * @@ -174,7 +181,7 @@ int cpu_init_r (void) * initialize a bunch of registers, * initialize the UPM's */ -void cpu_init_f (void) +void cpu_init_f(void) { #ifndef CONFIG_WATCHDOG /* disable watchdog if we aren't using it */ @@ -183,7 +190,11 @@ void cpu_init_f (void) #ifndef CONFIG_MONITOR_IS_IN_RAM /* Set speed /PLL */ - MCFCLOCK_SYNCR = MCFCLOCK_SYNCR_MFD(CFG_MFD) | MCFCLOCK_SYNCR_RFD(CFG_RFD); + MCFCLOCK_SYNCR = + MCFCLOCK_SYNCR_MFD(CFG_MFD) | MCFCLOCK_SYNCR_RFD(CFG_RFD); + while (!(MCFCLOCK_SYNSR & MCFCLOCK_SYNSR_LOCK)) ; + + MCFGPIO_PBCDPAR = 0xc0; /* Set up the GPIO ports */ #ifdef CFG_PEPAR @@ -228,29 +239,28 @@ void cpu_init_f (void) defined(CFG_CS0_WIDTH) & defined(CFG_CS0_RO) & \ defined(CFG_CS0_WS) - MCFCSM_CSAR0 = (CFG_CS0_BASE >> 16) & 0xFFFF; - - #if (CFG_CS0_WIDTH == 8) - #define CFG_CS0_PS MCFCSM_CSCR_PS_8 - #elif (CFG_CS0_WIDTH == 16) - #define CFG_CS0_PS MCFCSM_CSCR_PS_16 - #elif (CFG_CS0_WIDTH == 32) - #define CFG_CS0_PS MCFCSM_CSCR_PS_32 - #else - #error "CFG_CS0_WIDTH: Fault - wrong bus with for CS0" - #endif - MCFCSM_CSCR0 = MCFCSM_CSCR_WS(CFG_CS0_WS) - |CFG_CS0_PS - |MCFCSM_CSCR_AA; - - #if (CFG_CS0_RO != 0) - MCFCSM_CSMR0 = MCFCSM_CSMR_BAM(CFG_CS0_SIZE-1) - |MCFCSM_CSMR_WP|MCFCSM_CSMR_V; - #else - MCFCSM_CSMR0 = MCFCSM_CSMR_BAM(CFG_CS0_SIZE-1)|MCFCSM_CSMR_V; - #endif + MCFCSM_CSAR0 = (CFG_CS0_BASE >> 16) & 0xFFFF; + +#if (CFG_CS0_WIDTH == 8) +#define CFG_CS0_PS MCFCSM_CSCR_PS_8 +#elif (CFG_CS0_WIDTH == 16) +#define CFG_CS0_PS MCFCSM_CSCR_PS_16 +#elif (CFG_CS0_WIDTH == 32) +#define CFG_CS0_PS MCFCSM_CSCR_PS_32 #else - #waring "Chip Select 0 are not initialized/used" +#error "CFG_CS0_WIDTH: Fault - wrong bus with for CS0" +#endif + MCFCSM_CSCR0 = MCFCSM_CSCR_WS(CFG_CS0_WS) + | CFG_CS0_PS | MCFCSM_CSCR_AA; + +#if (CFG_CS0_RO != 0) + MCFCSM_CSMR0 = MCFCSM_CSMR_BAM(CFG_CS0_SIZE - 1) + | MCFCSM_CSMR_WP | MCFCSM_CSMR_V; +#else + MCFCSM_CSMR0 = MCFCSM_CSMR_BAM(CFG_CS0_SIZE - 1) | MCFCSM_CSMR_V; +#endif +#else +#waring "Chip Select 0 are not initialized/used" #endif #if defined(CFG_CS1_BASE) & defined(CFG_CS1_SIZE) & \ @@ -259,29 +269,27 @@ void cpu_init_f (void) MCFCSM_CSAR1 = (CFG_CS1_BASE >> 16) & 0xFFFF; - #if (CFG_CS1_WIDTH == 8) - #define CFG_CS1_PS MCFCSM_CSCR_PS_8 - #elif (CFG_CS1_WIDTH == 16) - #define CFG_CS1_PS MCFCSM_CSCR_PS_16 - #elif (CFG_CS1_WIDTH == 32) - #define CFG_CS1_PS MCFCSM_CSCR_PS_32 - #else - #error "CFG_CS1_WIDTH: Fault - wrong bus with for CS1" - #endif - MCFCSM_CSCR1 = MCFCSM_CSCR_WS(CFG_CS1_WS) - |CFG_CS1_PS - |MCFCSM_CSCR_AA; - - #if (CFG_CS1_RO != 0) - MCFCSM_CSMR1 = MCFCSM_CSMR_BAM(CFG_CS1_SIZE-1) - |MCFCSM_CSMR_WP - |MCFCSM_CSMR_V; - #else - MCFCSM_CSMR1 = MCFCSM_CSMR_BAM(CFG_CS1_SIZE-1) - |MCFCSM_CSMR_V; - #endif +#if (CFG_CS1_WIDTH == 8) +#define CFG_CS1_PS MCFCSM_CSCR_PS_8 +#elif (CFG_CS1_WIDTH == 16) +#define CFG_CS1_PS MCFCSM_CSCR_PS_16 +#elif (CFG_CS1_WIDTH == 32) +#define CFG_CS1_PS MCFCSM_CSCR_PS_32 +#else +#error "CFG_CS1_WIDTH: Fault - wrong bus with for CS1" +#endif + MCFCSM_CSCR1 = MCFCSM_CSCR_WS(CFG_CS1_WS) + | CFG_CS1_PS | MCFCSM_CSCR_AA; + +#if (CFG_CS1_RO != 0) + MCFCSM_CSMR1 = MCFCSM_CSMR_BAM(CFG_CS1_SIZE - 1) + | MCFCSM_CSMR_WP | MCFCSM_CSMR_V; +#else + MCFCSM_CSMR1 = MCFCSM_CSMR_BAM(CFG_CS1_SIZE - 1) + | MCFCSM_CSMR_V; +#endif #else - #warning "Chip Select 1 are not initialized/used" +#warning "Chip Select 1 are not initialized/used" #endif #if defined(CFG_CS2_BASE) & defined(CFG_CS2_SIZE) & \ @@ -290,29 +298,27 @@ void cpu_init_f (void) MCFCSM_CSAR2 = (CFG_CS2_BASE >> 16) & 0xFFFF; - #if (CFG_CS2_WIDTH == 8) - #define CFG_CS2_PS MCFCSM_CSCR_PS_8 - #elif (CFG_CS2_WIDTH == 16) - #define CFG_CS2_PS MCFCSM_CSCR_PS_16 - #elif (CFG_CS2_WIDTH == 32) - #define CFG_CS2_PS MCFCSM_CSCR_PS_32 - #else - #error "CFG_CS2_WIDTH: Fault - wrong bus with for CS2" - #endif - MCFCSM_CSCR2 = MCFCSM_CSCR_WS(CFG_CS2_WS) - |CFG_CS2_PS - |MCFCSM_CSCR_AA; - - #if (CFG_CS2_RO != 0) - MCFCSM_CSMR2 = MCFCSM_CSMR_BAM(CFG_CS2_SIZE-1) - |MCFCSM_CSMR_WP - |MCFCSM_CSMR_V; - #else - MCFCSM_CSMR2 = MCFCSM_CSMR_BAM(CFG_CS2_SIZE-1) - |MCFCSM_CSMR_V; - #endif +#if (CFG_CS2_WIDTH == 8) +#define CFG_CS2_PS MCFCSM_CSCR_PS_8 +#elif (CFG_CS2_WIDTH == 16) +#define CFG_CS2_PS MCFCSM_CSCR_PS_16 +#elif (CFG_CS2_WIDTH == 32) +#define CFG_CS2_PS MCFCSM_CSCR_PS_32 #else - #warning "Chip Select 2 are not initialized/used" +#error "CFG_CS2_WIDTH: Fault - wrong bus with for CS2" +#endif + MCFCSM_CSCR2 = MCFCSM_CSCR_WS(CFG_CS2_WS) + | CFG_CS2_PS | MCFCSM_CSCR_AA; + +#if (CFG_CS2_RO != 0) + MCFCSM_CSMR2 = MCFCSM_CSMR_BAM(CFG_CS2_SIZE - 1) + | MCFCSM_CSMR_WP | MCFCSM_CSMR_V; +#else + MCFCSM_CSMR2 = MCFCSM_CSMR_BAM(CFG_CS2_SIZE - 1) + | MCFCSM_CSMR_V; +#endif +#else +#warning "Chip Select 2 are not initialized/used" #endif #if defined(CFG_CS3_BASE) & defined(CFG_CS3_SIZE) & \ @@ -321,32 +327,30 @@ void cpu_init_f (void) MCFCSM_CSAR3 = (CFG_CS3_BASE >> 16) & 0xFFFF; - #if (CFG_CS3_WIDTH == 8) - #define CFG_CS3_PS MCFCSM_CSCR_PS_8 - #elif (CFG_CS3_WIDTH == 16) - #define CFG_CS3_PS MCFCSM_CSCR_PS_16 - #elif (CFG_CS3_WIDTH == 32) - #define CFG_CS3_PS MCFCSM_CSCR_PS_32 - #else - #error "CFG_CS3_WIDTH: Fault - wrong bus with for CS1" - #endif - MCFCSM_CSCR3 = MCFCSM_CSCR_WS(CFG_CS3_WS) - |CFG_CS3_PS - |MCFCSM_CSCR_AA; - - #if (CFG_CS3_RO != 0) - MCFCSM_CSMR3 = MCFCSM_CSMR_BAM(CFG_CS3_SIZE-1) - |MCFCSM_CSMR_WP - |MCFCSM_CSMR_V; - #else - MCFCSM_CSMR3 = MCFCSM_CSMR_BAM(CFG_CS3_SIZE-1) - |MCFCSM_CSMR_V; - #endif +#if (CFG_CS3_WIDTH == 8) +#define CFG_CS3_PS MCFCSM_CSCR_PS_8 +#elif (CFG_CS3_WIDTH == 16) +#define CFG_CS3_PS MCFCSM_CSCR_PS_16 +#elif (CFG_CS3_WIDTH == 32) +#define CFG_CS3_PS MCFCSM_CSCR_PS_32 +#else +#error "CFG_CS3_WIDTH: Fault - wrong bus with for CS1" +#endif + MCFCSM_CSCR3 = MCFCSM_CSCR_WS(CFG_CS3_WS) + | CFG_CS3_PS | MCFCSM_CSCR_AA; + +#if (CFG_CS3_RO != 0) + MCFCSM_CSMR3 = MCFCSM_CSMR_BAM(CFG_CS3_SIZE - 1) + | MCFCSM_CSMR_WP | MCFCSM_CSMR_V; +#else + MCFCSM_CSMR3 = MCFCSM_CSMR_BAM(CFG_CS3_SIZE - 1) + | MCFCSM_CSMR_V; +#endif #else - #warning "Chip Select 3 are not initialized/used" +#warning "Chip Select 3 are not initialized/used" #endif -#endif /* CONFIG_MONITOR_IS_IN_RAM */ +#endif /* CONFIG_MONITOR_IS_IN_RAM */ /* defer enabling cache until boot (see do_go) */ /* icache_enable(); */ @@ -355,10 +359,29 @@ void cpu_init_f (void) /* * initialize higher level parts of CPU like timers */ -int cpu_init_r (void) +int cpu_init_r(void) { return (0); } + +void uart_port_conf(void) +{ + /* Setup Ports: */ + switch (CFG_UART_PORT) { + case 0: + MCFGPIO_PUAPAR &= 0xFc; + MCFGPIO_PUAPAR |= 0x03; + break; + case 1: + MCFGPIO_PUAPAR &= 0xF3; + MCFGPIO_PUAPAR |= 0x0C; + break; + case 2: + MCFGPIO_PASPAR &= 0xFF0F; + MCFGPIO_PASPAR |= 0x00A0; + break; + } +} #endif #if defined(CONFIG_M5249) @@ -369,7 +392,7 @@ int cpu_init_r (void) * initialize a bunch of registers, * initialize the UPM's */ -void cpu_init_f (void) +void cpu_init_f(void) { #ifndef CFG_PLL_BYPASS /* @@ -379,23 +402,23 @@ void cpu_init_f (void) volatile unsigned long cpll = mbar2_readLong(MCFSIM_PLLCR); unsigned long pllcr; #ifdef CFG_FAST_CLK - pllcr = 0x925a3100; /* ~140MHz clock (PLL bypass = 0) */ + pllcr = 0x925a3100; /* ~140MHz clock (PLL bypass = 0) */ #else - pllcr = 0x135a4140; /* ~72MHz clock (PLL bypass = 0) */ + pllcr = 0x135a4140; /* ~72MHz clock (PLL bypass = 0) */ #endif - cpll = cpll & 0xfffffffe; /* Set PLL bypass mode = 0 (PSTCLK = crystal) */ - mbar2_writeLong(MCFSIM_PLLCR, cpll); /* Set the PLL to bypass mode (PSTCLK = crystal) */ - mbar2_writeLong(MCFSIM_PLLCR, pllcr); /* set the clock speed */ - pllcr ^= 0x00000001; /* Set pll bypass to 1 */ - mbar2_writeLong(MCFSIM_PLLCR, pllcr); /* Start locking (pll bypass = 1) */ - udelay(0x20); /* Wait for a lock ... */ -#endif /* #ifndef CFG_PLL_BYPASS */ + cpll = cpll & 0xfffffffe; /* Set PLL bypass mode = 0 (PSTCLK = crystal) */ + mbar2_writeLong(MCFSIM_PLLCR, cpll); /* Set the PLL to bypass mode (PSTCLK = crystal) */ + mbar2_writeLong(MCFSIM_PLLCR, pllcr); /* set the clock speed */ + pllcr ^= 0x00000001; /* Set pll bypass to 1 */ + mbar2_writeLong(MCFSIM_PLLCR, pllcr); /* Start locking (pll bypass = 1) */ + udelay(0x20); /* Wait for a lock ... */ +#endif /* #ifndef CFG_PLL_BYPASS */ /* * NOTE: by setting the GPIO_FUNCTION registers, we ensure that the UART pins - * (UART0: gpio 30,27, UART1: gpio 31, 28) will be used as UART pins - * which is their primary function. - * ~Jeremy + * (UART0: gpio 30,27, UART1: gpio 31, 28) will be used as UART pins + * which is their primary function. + * ~Jeremy */ mbar2_writeLong(MCFSIM_GPIO_FUNC, CFG_GPIO_FUNC); mbar2_writeLong(MCFSIM_GPIO1_FUNC, CFG_GPIO1_FUNC); @@ -411,7 +434,7 @@ void cpu_init_f (void) * ~Jeremy * */ - mbar_writeByte(MCFSIM_MPARK, 0x30); /* 5249 Internal Core takes priority over DMA */ + mbar_writeByte(MCFSIM_MPARK, 0x30); /* 5249 Internal Core takes priority over DMA */ mbar_writeByte(MCFSIM_SYPCR, 0x00); mbar_writeByte(MCFSIM_SWIVR, 0x0f); mbar_writeByte(MCFSIM_SWSR, 0x00); @@ -431,7 +454,7 @@ void cpu_init_f (void) mbar2_writeLong(MCFSIM_GPIO_INT_EN, 0x00000080); mbar2_writeByte(MCFSIM_INTBASE, 0x40); /* Base interrupts at 64 */ mbar2_writeByte(MCFSIM_SPURVEC, 0x00); - mbar2_writeLong(MCFSIM_IDECONFIG1, 0x00000020); /* Enable a 1 cycle pre-drive cycle on CS1 */ + mbar2_writeLong(MCFSIM_IDECONFIG1, 0x00000020); /* Enable a 1 cycle pre-drive cycle on CS1 */ /* Setup interrupt priorities for gpio7 */ /* mbar2_writeLong(MCFSIM_INTLEV5, 0x70000000); */ @@ -459,8 +482,19 @@ void cpu_init_f (void) /* * initialize higher level parts of CPU like timers */ -int cpu_init_r (void) +int cpu_init_r(void) { return (0); } -#endif /* #if defined(CONFIG_M5249) */ + +void uart_port_conf(void) +{ + /* Setup Ports: */ + switch (CFG_UART_PORT) { + case 0: + break; + case 1: + break; + } +} +#endif /* #if defined(CONFIG_M5249) */ diff --git a/cpu/mcf52x2/fec.c b/cpu/mcf52x2/fec.c deleted file mode 100644 index ef9c798..0000000 --- a/cpu/mcf52x2/fec.c +++ /dev/null @@ -1,605 +0,0 @@ -/* - * (C) Copyright 2000-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <malloc.h> -#include <asm/fec.h> - -#ifdef CONFIG_M5271 -#include <asm/m5271.h> -#include <asm/immap_5271.h> -#endif - -#ifdef CONFIG_M5272 -#include <asm/m5272.h> -#include <asm/immap_5272.h> -#endif - -#ifdef CONFIG_M5282 -#include <asm/m5282.h> -#include <asm/immap_5282.h> -#endif - -#include <net.h> -#include <command.h> - -#ifdef CONFIG_M5272 -#define FEC_ADDR (CFG_MBAR + 0x840) -#endif -#if defined(CONFIG_M5282) || defined(CONFIG_M5271) -#define FEC_ADDR (CFG_MBAR + 0x1000) -#endif - -#undef ET_DEBUG -#undef MII_DEBUG - -#if defined(CONFIG_CMD_NET) && defined(FEC_ENET) - -#ifdef CFG_DISCOVER_PHY -#include <miiphy.h> -static void mii_discover_phy (void); -#endif - -/* Ethernet Transmit and Receive Buffers */ -#define DBUF_LENGTH 1520 - -#define TX_BUF_CNT 2 - -#define TOUT_LOOP 100 - -#define PKT_MAXBUF_SIZE 1518 -#define PKT_MINBUF_SIZE 64 -#define PKT_MAXBLR_SIZE 1520 - - -static char txbuf[DBUF_LENGTH]; - -static uint rxIdx; /* index of the current RX buffer */ -static uint txIdx; /* index of the current TX buffer */ - -/* - * FEC Ethernet Tx and Rx buffer descriptors allocated at the - * immr->udata_bd address on Dual-Port RAM - * Provide for Double Buffering - */ - -typedef volatile struct CommonBufferDescriptor { - cbd_t rxbd[PKTBUFSRX]; /* Rx BD */ - cbd_t txbd[TX_BUF_CNT]; /* Tx BD */ -} RTXBD; - -static RTXBD *rtx = NULL; - -int eth_send (volatile void *packet, int length) -{ - int j, rc; - volatile fec_t *fecp = (fec_t *) (FEC_ADDR); - - /* section 16.9.23.3 - * Wait for ready - */ - j = 0; - while ((rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY) - && (j < TOUT_LOOP)) { - udelay (1); - j++; - } - if (j >= TOUT_LOOP) { - printf ("TX not ready\n"); - } - - rtx->txbd[txIdx].cbd_bufaddr = (uint) packet; - rtx->txbd[txIdx].cbd_datlen = length; - rtx->txbd[txIdx].cbd_sc |= BD_ENET_TX_READY | BD_ENET_TX_LAST; - - /* Activate transmit Buffer Descriptor polling */ - fecp->fec_x_des_active = 0x01000000; /* Descriptor polling active */ - - j = 0; - while ((rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY) - && (j < TOUT_LOOP)) { - udelay (1); - j++; - } - if (j >= TOUT_LOOP) { - printf ("TX timeout\n"); - } -#ifdef ET_DEBUG - printf ("%s[%d] %s: cycles: %d status: %x retry cnt: %d\n", - __FILE__, __LINE__, __FUNCTION__, j, rtx->txbd[txIdx].cbd_sc, - (rtx->txbd[txIdx].cbd_sc & 0x003C) >> 2); -#endif - - /* return only status bits */ ; - rc = (rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_STATS); - - txIdx = (txIdx + 1) % TX_BUF_CNT; - - return rc; -} - -int eth_rx (void) -{ - int length; - volatile fec_t *fecp = (fec_t *) FEC_ADDR; - - for (;;) { - /* section 16.9.23.2 */ - if (rtx->rxbd[rxIdx].cbd_sc & BD_ENET_RX_EMPTY) { - length = -1; - break; /* nothing received - leave for() loop */ - } - - length = rtx->rxbd[rxIdx].cbd_datlen; - - if (rtx->rxbd[rxIdx].cbd_sc & 0x003f) { -#ifdef ET_DEBUG - printf ("%s[%d] err: %x\n", - __FUNCTION__, __LINE__, - rtx->rxbd[rxIdx].cbd_sc); -#endif - } else { - /* Pass the packet up to the protocol layers. */ - NetReceive (NetRxPackets[rxIdx], length - 4); - } - - /* Give the buffer back to the FEC. */ - rtx->rxbd[rxIdx].cbd_datlen = 0; - - /* wrap around buffer index when necessary */ - if ((rxIdx + 1) >= PKTBUFSRX) { - rtx->rxbd[PKTBUFSRX - 1].cbd_sc = - (BD_ENET_RX_WRAP | BD_ENET_RX_EMPTY); - rxIdx = 0; - } else { - rtx->rxbd[rxIdx].cbd_sc = BD_ENET_RX_EMPTY; - rxIdx++; - } - - /* Try to fill Buffer Descriptors */ - fecp->fec_r_des_active = 0x01000000; /* Descriptor polling active */ - } - - return length; -} - -/************************************************************** - * - * FEC Ethernet Initialization Routine - * - *************************************************************/ -#define FEC_ECNTRL_ETHER_EN 0x00000002 -#define FEC_ECNTRL_RESET 0x00000001 - -#define FEC_RCNTRL_BC_REJ 0x00000010 -#define FEC_RCNTRL_PROM 0x00000008 -#define FEC_RCNTRL_MII_MODE 0x00000004 -#define FEC_RCNTRL_DRT 0x00000002 -#define FEC_RCNTRL_LOOP 0x00000001 - -#define FEC_TCNTRL_FDEN 0x00000004 -#define FEC_TCNTRL_HBC 0x00000002 -#define FEC_TCNTRL_GTS 0x00000001 - -#define FEC_RESET_DELAY 50000 - -int eth_init (bd_t * bd) -{ -#ifndef CFG_ENET_BD_BASE - DECLARE_GLOBAL_DATA_PTR; -#endif - int i; - volatile fec_t *fecp = (fec_t *) (FEC_ADDR); - - /* Whack a reset. - * A delay is required between a reset of the FEC block and - * initialization of other FEC registers because the reset takes - * some time to complete. If you don't delay, subsequent writes - * to FEC registers might get killed by the reset routine which is - * still in progress. - */ - fecp->fec_ecntrl = FEC_ECNTRL_RESET; - for (i = 0; - (fecp->fec_ecntrl & FEC_ECNTRL_RESET) && (i < FEC_RESET_DELAY); - ++i) { - udelay (1); - } - if (i == FEC_RESET_DELAY) { - printf ("FEC_RESET_DELAY timeout\n"); - return 0; - } - - /* We use strictly polling mode only - */ - fecp->fec_imask = 0; - - /* Clear any pending interrupt */ - fecp->fec_ievent = 0xffffffff; - - /* Set station address */ -#define ea bd->bi_enetaddr - fecp->fec_addr_low = (ea[0] << 24) | (ea[1] << 16) | - (ea[2] << 8) | (ea[3]); - fecp->fec_addr_high = (ea[4] << 24) | (ea[5] << 16); -#ifdef ET_DEBUG - printf ("Eth Addrs: %02x:%02x:%02x:%02x:%02x:%02x\n", - ea[0], ea[1], ea[2], ea[3], ea[4], ea[5]); -#endif -#undef ea - -#ifdef CONFIG_M5271 - /* Clear multicast address hash table - */ - fecp->fec_ghash_table_high = 0; - fecp->fec_ghash_table_low = 0; - - /* Clear individual address hash table - */ - fecp->fec_ihash_table_high = 0; - fecp->fec_ihash_table_low = 0; -#else - /* Clear multicast address hash table - */ -#ifdef CONFIG_M5282 - fecp->fec_ihash_table_high = 0; - fecp->fec_ihash_table_low = 0; -#else - fecp->fec_hash_table_high = 0; - fecp->fec_hash_table_low = 0; -#endif -#endif - - /* Set maximum receive buffer size. - */ - fecp->fec_r_buff_size = PKT_MAXBLR_SIZE; - - /* - * Setup Buffers and Buffer Desriptors - */ - rxIdx = 0; - txIdx = 0; - - if (!rtx) { -#ifdef CFG_ENET_BD_BASE - rtx = (RTXBD *) CFG_ENET_BD_BASE; -#else - rtx = (RTXBD *) (CFG_MONITOR_BASE+gd->reloc_off - - (((PKTBUFSRX+TX_BUF_CNT)*+sizeof(cbd_t) - +0xFF) - & ~0xFF) - ); - debug("set ENET_DB_BASE to %lX\n",(long) rtx); -#endif - } - - /* - * Setup Receiver Buffer Descriptors (13.14.24.18) - * Settings: - * Empty, Wrap - */ - for (i = 0; i < PKTBUFSRX; i++) { - rtx->rxbd[i].cbd_sc = BD_ENET_RX_EMPTY; - rtx->rxbd[i].cbd_datlen = 0; /* Reset */ - rtx->rxbd[i].cbd_bufaddr = (uint) NetRxPackets[i]; - } - rtx->rxbd[PKTBUFSRX - 1].cbd_sc |= BD_ENET_RX_WRAP; - - /* - * Setup Ethernet Transmitter Buffer Descriptors (13.14.24.19) - * Settings: - * Last, Tx CRC - */ - for (i = 0; i < TX_BUF_CNT; i++) { - rtx->txbd[i].cbd_sc = BD_ENET_TX_LAST | BD_ENET_TX_TC; - rtx->txbd[i].cbd_datlen = 0; /* Reset */ - rtx->txbd[i].cbd_bufaddr = (uint) (&txbuf[0]); - } - rtx->txbd[TX_BUF_CNT - 1].cbd_sc |= BD_ENET_TX_WRAP; - - /* Set receive and transmit descriptor base - */ - fecp->fec_r_des_start = (unsigned int) (&rtx->rxbd[0]); - fecp->fec_x_des_start = (unsigned int) (&rtx->txbd[0]); - - /* Enable MII mode - */ - -#if 0 /* Full duplex mode */ - fecp->fec_r_cntrl = FEC_RCNTRL_MII_MODE; - fecp->fec_x_cntrl = FEC_TCNTRL_FDEN; -#else /* Half duplex mode */ - fecp->fec_r_cntrl = (PKT_MAXBUF_SIZE << 16); /* set max frame length */ - fecp->fec_r_cntrl |= FEC_RCNTRL_MII_MODE | FEC_RCNTRL_DRT; - fecp->fec_x_cntrl = 0; -#endif - /* Set MII speed */ - fecp->fec_mii_speed = (((CFG_CLK / 2) / (2500000 / 10)) + 5) / 10; - fecp->fec_mii_speed *= 2; - - /* Configure port B for MII. - */ - /* port initialization was already made in cpu_init_f() */ - - /* Now enable the transmit and receive processing - */ - fecp->fec_ecntrl = FEC_ECNTRL_ETHER_EN; - -#ifdef CFG_DISCOVER_PHY - /* wait for the PHY to wake up after reset */ - mii_discover_phy (); -#endif - - /* And last, try to fill Rx Buffer Descriptors */ - fecp->fec_r_des_active = 0x01000000; /* Descriptor polling active */ - - return 1; -} - -void eth_halt (void) -{ - volatile fec_t *fecp = (fec_t *) FEC_ADDR; - - fecp->fec_ecntrl = 0; -} - - -#if defined(CFG_DISCOVER_PHY) || defined(CONFIG_CMD_MII) - -static int phyaddr = -1; /* didn't find a PHY yet */ -static uint phytype; - -/* Make MII read/write commands for the FEC. -*/ - -#define mk_mii_read(ADDR, REG) (0x60020000 | ((ADDR << 23) | \ - (REG & 0x1f) << 18)) - -#define mk_mii_write(ADDR, REG, VAL) (0x50020000 | ((ADDR << 23) | \ - (REG & 0x1f) << 18) | \ - (VAL & 0xffff)) - -/* Interrupt events/masks. -*/ -#define FEC_ENET_HBERR ((uint)0x80000000) /* Heartbeat error */ -#define FEC_ENET_BABR ((uint)0x40000000) /* Babbling receiver */ -#define FEC_ENET_BABT ((uint)0x20000000) /* Babbling transmitter */ -#define FEC_ENET_GRA ((uint)0x10000000) /* Graceful stop complete */ -#define FEC_ENET_TXF ((uint)0x08000000) /* Full frame transmitted */ -#define FEC_ENET_TXB ((uint)0x04000000) /* A buffer was transmitted */ -#define FEC_ENET_RXF ((uint)0x02000000) /* Full frame received */ -#define FEC_ENET_RXB ((uint)0x01000000) /* A buffer was received */ -#define FEC_ENET_MII ((uint)0x00800000) /* MII interrupt */ -#define FEC_ENET_EBERR ((uint)0x00400000) /* SDMA bus error */ - -/* PHY identification - */ -#define PHY_ID_LXT970 0x78100000 /* LXT970 */ -#define PHY_ID_LXT971 0x001378e0 /* LXT971 and 972 */ -#define PHY_ID_82555 0x02a80150 /* Intel 82555 */ -#define PHY_ID_QS6612 0x01814400 /* QS6612 */ -#define PHY_ID_AMD79C784 0x00225610 /* AMD 79C784 */ -#define PHY_ID_LSI80225 0x0016f870 /* LSI 80225 */ -#define PHY_ID_LSI80225B 0x0016f880 /* LSI 80225/B */ - -/* send command to phy using mii, wait for result */ -static uint mii_send (uint mii_cmd) -{ - uint mii_reply; - volatile fec_t *ep = (fec_t *) (FEC_ADDR); - - ep->fec_mii_data = mii_cmd; /* command to phy */ - - /* wait for mii complete */ - while (!(ep->fec_ievent & FEC_ENET_MII)); /* spin until done */ - mii_reply = ep->fec_mii_data; /* result from phy */ - ep->fec_ievent = FEC_ENET_MII; /* clear MII complete */ -#ifdef ET_DEBUG - printf ("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n", - __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply); -#endif - return (mii_reply & 0xffff); /* data read from phy */ -} -#endif - -#if defined(CFG_DISCOVER_PHY) -static void mii_discover_phy (void) -{ -#define MAX_PHY_PASSES 11 - uint phyno; - int pass; - - phyaddr = -1; /* didn't find a PHY yet */ - for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) { - if (pass > 1) { - /* PHY may need more time to recover from reset. - * The LXT970 needs 50ms typical, no maximum is - * specified, so wait 10ms before try again. - * With 11 passes this gives it 100ms to wake up. - */ - udelay (10000); /* wait 10ms */ - } - for (phyno = 1; phyno < 32 && phyaddr < 0; ++phyno) { - phytype = mii_send (mk_mii_read (phyno, PHY_PHYIDR1)); -#ifdef ET_DEBUG - printf ("PHY type 0x%x pass %d type ", phytype, pass); -#endif - if (phytype != 0xffff) { - phyaddr = phyno; - phytype <<= 16; - phytype |= mii_send (mk_mii_read (phyno, - PHY_PHYIDR2)); - -#ifdef ET_DEBUG - printf ("PHY @ 0x%x pass %d type ", phyno, - pass); - switch (phytype & 0xfffffff0) { - case PHY_ID_LXT970: - printf ("LXT970\n"); - break; - case PHY_ID_LXT971: - printf ("LXT971\n"); - break; - case PHY_ID_82555: - printf ("82555\n"); - break; - case PHY_ID_QS6612: - printf ("QS6612\n"); - break; - case PHY_ID_AMD79C784: - printf ("AMD79C784\n"); - break; - case PHY_ID_LSI80225B: - printf ("LSI L80225/B\n"); - break; - default: - printf ("0x%08x\n", phytype); - break; - } -#endif - } - } - } - if (phyaddr < 0) { - printf ("No PHY device found.\n"); - } -} -#endif /* CFG_DISCOVER_PHY */ - -#if defined(CONFIG_CMD_MII) && !defined(CONFIG_BITBANGMII) - -static int mii_init_done = 0; - -/**************************************************************************** - * mii_init -- Initialize the MII for MII command without ethernet - * This function is a subset of eth_init - **************************************************************************** - */ -void mii_init (void) -{ - volatile fec_t *fecp = (fec_t *) (FEC_ADDR); - - int i; - - if (mii_init_done != 0) { - return; - } - - /* Whack a reset. - * A delay is required between a reset of the FEC block and - * initialization of other FEC registers because the reset takes - * some time to complete. If you don't delay, subsequent writes - * to FEC registers might get killed by the reset routine which is - * still in progress. - */ - - fecp->fec_ecntrl = FEC_ECNTRL_RESET; - for (i = 0; - (fecp->fec_ecntrl & FEC_ECNTRL_RESET) && (i < FEC_RESET_DELAY); - ++i) { - udelay (1); - } - if (i == FEC_RESET_DELAY) { - printf ("FEC_RESET_DELAY timeout\n"); - return; - } - - /* We use strictly polling mode only - */ - fecp->fec_imask = 0; - - /* Clear any pending interrupt - */ - fecp->fec_ievent = 0xffffffff; - - /* Set MII speed */ - fecp->fec_mii_speed = 0x0e; - - /* Configure port B for MII. - */ - /* port initialization was already made in cpu_init_f() */ - - /* Now enable the transmit and receive processing */ - fecp->fec_ecntrl = FEC_ECNTRL_ETHER_EN; - - mii_init_done = 1; -} - -/***************************************************************************** - * Read and write a MII PHY register, routines used by MII Utilities - * - * FIXME: These routines are expected to return 0 on success, but mii_send - * does _not_ return an error code. Maybe 0xFFFF means error, i.e. - * no PHY connected... - * For now always return 0. - * FIXME: These routines only work after calling eth_init() at least once! - * Otherwise they hang in mii_send() !!! Sorry! - *****************************************************************************/ - -int mcf52x2_miiphy_read (char *devname, unsigned char addr, - unsigned char reg, unsigned short *value) -{ - short rdreg; /* register working value */ - -#ifdef MII_DEBUG - printf ("miiphy_read(0x%x) @ 0x%x = ", reg, addr); -#endif - rdreg = mii_send (mk_mii_read (addr, reg)); - - *value = rdreg; - -#ifdef MII_DEBUG - printf ("0x%04x\n", *value); -#endif - - return 0; -} - -int mcf52x2_miiphy_write (char *devname, unsigned char addr, - unsigned char reg, unsigned short value) -{ - short rdreg; /* register working value */ - -#ifdef MII_DEBUG - printf ("miiphy_write(0x%x) @ 0x%x = ", reg, addr); -#endif - - rdreg = mii_send (mk_mii_write (addr, reg, value)); - -#ifdef MII_DEBUG - printf ("0x%04x\n", value); -#endif - - return 0; -} -#endif -#endif - -int mcf52x2_miiphy_initialize(bd_t *bis) -{ -#if defined(CONFIG_CMD_NET) && defined(FEC_ENET) -#if defined(CONFIG_CMD_MII) && !defined(CONFIG_BITBANGMII) - miiphy_register("mcf52x2phy", mcf52x2_miiphy_read, mcf52x2_miiphy_write); -#endif -#endif - return 0; -} diff --git a/cpu/mcf52x2/interrupts.c b/cpu/mcf52x2/interrupts.c index 116747a..d9a35bb 100644 --- a/cpu/mcf52x2/interrupts.c +++ b/cpu/mcf52x2/interrupts.c @@ -26,168 +26,77 @@ #include <common.h> #include <watchdog.h> #include <asm/processor.h> - -#ifdef CONFIG_M5271 -#include <asm/m5271.h> -#include <asm/immap_5271.h> -#endif +#include <asm/immap.h> #ifdef CONFIG_M5272 -#include <asm/m5272.h> -#include <asm/immap_5272.h> -#endif - -#ifdef CONFIG_M5282 -#include <asm/m5282.h> -#include <asm/immap_5282.h> -#endif - -#ifdef CONFIG_M5249 -#include <asm/m5249.h> -#endif - - -#define NR_IRQS 31 - -/* - * Interrupt vector functions. - */ -struct interrupt_action { - interrupt_handler_t *handler; - void *arg; -}; - -static struct interrupt_action irq_vecs[NR_IRQS]; - -static __inline__ unsigned short get_sr (void) -{ - unsigned short sr; - - asm volatile ("move.w %%sr,%0":"=r" (sr):); - - return sr; -} - -static __inline__ void set_sr (unsigned short sr) +int interrupt_init(void) { - asm volatile ("move.w %0,%%sr"::"r" (sr)); -} + volatile intctrl_t *intp = (intctrl_t *) (MMAP_INTC); -/************************************************************************/ -/* - * Install and free an interrupt handler - */ -void irq_install_handler (int vec, interrupt_handler_t * handler, void *arg) -{ -#ifdef CONFIG_M5272 - volatile intctrl_t *intp = (intctrl_t *) (CFG_MBAR + MCFSIM_ICR1); -#endif - int vec_base = 0; - -#ifdef CONFIG_M5272 - vec_base = intp->int_pivr & 0xe0; -#endif - - if ((vec < vec_base) || (vec > vec_base + NR_IRQS)) { - printf ("irq_install_handler: wrong interrupt vector %d\n", - vec); - return; - } - - irq_vecs[vec - vec_base].handler = handler; - irq_vecs[vec - vec_base].arg = arg; -} - -void irq_free_handler (int vec) -{ -#ifdef CONFIG_M5272 - volatile intctrl_t *intp = (intctrl_t *) (CFG_MBAR + MCFSIM_ICR1); -#endif - int vec_base = 0; - -#ifdef CONFIG_M5272 - vec_base = intp->int_pivr & 0xe0; -#endif + /* disable all external interrupts */ + intp->int_icr1 = 0x88888888; + intp->int_icr2 = 0x88888888; + intp->int_icr3 = 0x88888888; + intp->int_icr4 = 0x88888888; + intp->int_pitr = 0x00000000; + /* initialize vector register */ + intp->int_pivr = 0x40; - if ((vec < vec_base) || (vec > vec_base + NR_IRQS)) { - return; - } + enable_interrupts(); - irq_vecs[vec - vec_base].handler = NULL; - irq_vecs[vec - vec_base].arg = NULL; + return 0; } -void enable_interrupts (void) +#if defined(CONFIG_MCFTMR) +void dtimer_intr_setup(void) { - unsigned short sr; + volatile intctrl_t *intp = (intctrl_t *) (CFG_INTR_BASE); - sr = get_sr (); - set_sr (sr & ~0x0700); + intp->int_icr1 &= ~INT_ICR1_TMR3MASK; + intp->int_icr1 |= CFG_TMRINTR_PRI; } +#endif /* CONFIG_MCFTMR */ +#endif /* CONFIG_M5272 */ -int disable_interrupts (void) +#if defined(CONFIG_M5282) || defined(CONFIG_M5271) +int interrupt_init(void) { - unsigned short sr; + volatile int0_t *intp = (int0_t *) (CFG_INTR_BASE); - sr = get_sr (); - set_sr (sr | 0x0700); + /* Make sure all interrupts are disabled */ + intp->imrl0 |= 0x1; - return ((sr & 0x0700) == 0); /* return TRUE, if interrupts were enabled before */ + enable_interrupts(); + return 0; } -void int_handler (struct pt_regs *fp) +#if defined(CONFIG_MCFTMR) +void dtimer_intr_setup(void) { -#ifdef CONFIG_M5272 - volatile intctrl_t *intp = (intctrl_t *) (CFG_MBAR + MCFSIM_ICR1); -#endif - int vec, vec_base = 0; - - vec = (fp->vector >> 2) & 0xff; -#ifdef CONFIG_M5272 - vec_base = intp->int_pivr & 0xe0; -#endif + volatile int0_t *intp = (int0_t *) (CFG_INTR_BASE); - if (irq_vecs[vec - vec_base].handler != NULL) { - irq_vecs[vec - - vec_base].handler (irq_vecs[vec - vec_base].arg); - } else { - printf ("\nBogus External Interrupt Vector %d\n", vec); - } + intp->icr0[CFG_TMRINTR_NO] = CFG_TMRINTR_PRI; + intp->imrl0 &= ~0xFFFFFFFE; + intp->imrl0 &= ~CFG_TMRINTR_MASK; } +#endif /* CONFIG_MCFTMR */ +#endif /* CONFIG_M5282 | CONFIG_M5271 */ - -#ifdef CONFIG_M5272 -int interrupt_init (void) +#ifdef CONFIG_M5249 +int interrupt_init(void) { - volatile intctrl_t *intp = (intctrl_t *) (CFG_MBAR + MCFSIM_ICR1); - - /* disable all external interrupts */ - intp->int_icr1 = 0x88888888; - intp->int_icr2 = 0x88888888; - intp->int_icr3 = 0x88888888; - intp->int_icr4 = 0x88888888; - intp->int_pitr = 0x00000000; - /* initialize vector register */ - intp->int_pivr = 0x40; - - enable_interrupts (); + enable_interrupts(); return 0; } -#endif -#if defined(CONFIG_M5282) || defined(CONFIG_M5271) -int interrupt_init (void) -{ - return 0; -} -#endif - -#ifdef CONFIG_M5249 -int interrupt_init (void) +#if defined(CONFIG_MCFTMR) +void dtimer_intr_setup(void) { - enable_interrupts (); - - return 0; + mbar_writeLong(MCFSIM_IMR, mbar_readLong(MCFSIM_IMR) & ~0x00000400); + mbar_writeByte(MCFSIM_TIMER2ICR, + MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL7 | + MCFSIM_ICR_PRI3); } -#endif +#endif /* CONFIG_MCFTMR */ +#endif /* CONFIG_M5249 */ diff --git a/cpu/mcf52x2/serial.c b/cpu/mcf52x2/serial.c deleted file mode 100644 index 8be09e3..0000000 --- a/cpu/mcf52x2/serial.c +++ /dev/null @@ -1,215 +0,0 @@ -/* - * (C) Copyright 2000-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <command.h> -#include <watchdog.h> - -#include <asm/mcfuart.h> - -#ifdef CONFIG_M5271 -#include <asm/m5271.h> -#endif - -#ifdef CONFIG_M5272 -#include <asm/m5272.h> -#endif - -#ifdef CONFIG_M5282 -#include <asm/m5282.h> -#endif - -#ifdef CONFIG_M5249 -#include <asm/m5249.h> -#endif - -DECLARE_GLOBAL_DATA_PTR; - -#if defined(CONFIG_M5249) || defined(CONFIG_M5271) -#define DoubleClock(a) ((double)(CFG_CLK/2) / 32.0 / (double)(a)) -#else -#define DoubleClock(a) ((double)(CFG_CLK) / 32.0 / (double)(a)) -#endif - -void rs_serial_setbaudrate(int port,int baudrate) -{ -#if defined(CONFIG_M5272) || defined(CONFIG_M5249) || defined(CONFIG_M5271) - volatile unsigned char *uartp; -# ifndef CONFIG_M5271 - double fraction; -# endif - double clock; - - if (port == 0) - uartp = (volatile unsigned char *) (CFG_MBAR + MCFUART_BASE1); - else - uartp = (volatile unsigned char *) (CFG_MBAR + MCFUART_BASE2); - - clock = DoubleClock(baudrate); /* Set baud above */ - - uartp[MCFUART_UBG1] = (((int)clock >> 8) & 0xff); /* set msb baud */ - uartp[MCFUART_UBG2] = ((int)clock & 0xff); /* set lsb baud */ - -# ifndef CONFIG_M5271 - fraction = ((clock - (int)clock) * 16.0) + 0.5; - uartp[MCFUART_UFPD] = ((int)fraction & 0xf); /* set baud fraction adjust */ -# endif -#endif - -#if defined(CONFIG_M5282) - volatile unsigned char *uartp; - long clock; - - switch (port) { - case 1: - uartp = (volatile unsigned char *) (CFG_MBAR + MCFUART_BASE2); - break; - case 2: - uartp = (volatile unsigned char *) (CFG_MBAR + MCFUART_BASE3); - break; - default: - uartp = (volatile unsigned char *) (CFG_MBAR + MCFUART_BASE1); - } - - clock = (long) CFG_CLK / ((long) 32 * baudrate); /* Set baud above */ - - uartp[MCFUART_UBG1] = (((int)clock >> 8) & 0xff); /* set msb baud */ - uartp[MCFUART_UBG2] = ((int) clock & 0xff); /* set lsb baud */ - -#endif -}; - -void rs_serial_init (int port, int baudrate) -{ - volatile unsigned char *uartp; - - /* - * Reset UART, get it into known state... - */ - switch (port) { - case 1: - uartp = (volatile unsigned char *) (CFG_MBAR + MCFUART_BASE2); - break; -#if defined(CONFIG_M5282) - case 2: - uartp = (volatile unsigned char *) (CFG_MBAR + MCFUART_BASE3); - break; -#endif - default: - uartp = (volatile unsigned char *) (CFG_MBAR + MCFUART_BASE1); - } - - uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETTX; /* reset TX */ - uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETRX; /* reset RX */ - - uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETMRPTR; /* reset MR pointer */ - uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETERR; /* reset Error pointer */ - - /* - * Set port for CONSOLE_BAUD_RATE, 8 data bits, 1 stop bit, no parity. - */ - uartp[MCFUART_UMR] = MCFUART_MR1_PARITYNONE | MCFUART_MR1_CS8; - uartp[MCFUART_UMR] = MCFUART_MR2_STOP1; - - /* Mask UART interrupts */ - uartp[MCFUART_UIMR] = 0; - - /* Set clock Select Register: Tx/Rx clock is timer */ - uartp[MCFUART_UCSR] = MCFUART_UCSR_RXCLKTIMER | MCFUART_UCSR_TXCLKTIMER; - - rs_serial_setbaudrate (port, baudrate); - - /* Enable Tx/Rx */ - uartp[MCFUART_UCR] = MCFUART_UCR_RXENABLE | MCFUART_UCR_TXENABLE; - - return; -} - -/****************************************************************************/ -/* - * Output a single character, using UART polled mode. - * This is used for console output. - */ - -void rs_put_char(char ch) -{ - volatile unsigned char *uartp; - int i; - - uartp = (volatile unsigned char *) (CFG_MBAR + MCFUART_BASE1); - - for (i = 0; (i < 0x10000); i++) { - if (uartp[MCFUART_USR] & MCFUART_USR_TXREADY) - break; - } - uartp[MCFUART_UTB] = ch; - return; -} - -int rs_is_char(void) -{ - volatile unsigned char *uartp; - - uartp = (volatile unsigned char *) (CFG_MBAR + MCFUART_BASE1); - return((uartp[MCFUART_USR] & MCFUART_USR_RXREADY) ? 1 : 0); -} - -int rs_get_char(void) -{ - volatile unsigned char *uartp; - - uartp = (volatile unsigned char *) (CFG_MBAR + MCFUART_BASE1); - return(uartp[MCFUART_URB]); -} - -void serial_setbrg(void) { - rs_serial_setbaudrate(0,gd->bd->bi_baudrate); -} - -int serial_init(void) { - rs_serial_init(0,gd->baudrate); - return 0; -} - - -void serial_putc(const char c) { - if (c == '\n') - serial_putc ('\r'); - rs_put_char(c); -} - -void serial_puts (const char *s) { - while (*s) - serial_putc(*s++); -} - -int serial_getc(void) { - while(!rs_is_char()) - WATCHDOG_RESET(); - - return rs_get_char(); -} - -int serial_tstc() { - return rs_is_char(); -} diff --git a/cpu/mcf52x2/start.S b/cpu/mcf52x2/start.S index 7c9a7d2..6783d4d 100644 --- a/cpu/mcf52x2/start.S +++ b/cpu/mcf52x2/start.S @@ -159,7 +159,7 @@ _copy_flash: _flashbar_setup: /* Initialize FLASHBAR: locate internal Flash and validate it */ - move.l #(CFG_INT_FLASH_BASE + 0x21), %d0 + move.l #(CFG_INT_FLASH_BASE + CFG_INT_FLASH_ENABLE), %d0 movec %d0, %RAMBAR0 jmp _after_flashbar_copy.L /* Force jump to absolute address */ _flashbar_setup_end: @@ -167,7 +167,7 @@ _flashbar_setup_end: _after_flashbar_copy: #else /* Setup code to initialize FLASHBAR, if start from external Memory */ - move.l #(CFG_INT_FLASH_BASE + 0x21), %d0 + move.l #(CFG_INT_FLASH_BASE + CFG_INT_FLASH_ENABLE), %d0 movec %d0, %RAMBAR0 #endif /* (TEXT_BASE == CFG_INT_FLASH_BASE) */ @@ -326,10 +326,10 @@ clear_bss: /* set parameters for board_init_r */ move.l %a0,-(%sp) /* dest_addr */ move.l %d0,-(%sp) /* gd */ - #if defined(DEBUG) && (TEXT_BASE != CFG_INT_FLASH_BASE) && \ - defined(CFG_HALT_BEFOR_RAM_JUMP) - halt - #endif +#if defined(DEBUG) && (TEXT_BASE != CFG_INT_FLASH_BASE) && \ + defined(CFG_HALT_BEFOR_RAM_JUMP) + halt +#endif jsr (%a1) /*------------------------------------------------------------------------------*/ @@ -356,6 +356,24 @@ _int_handler: /*------------------------------------------------------------------------------*/ /* cache functions */ +#ifdef CONFIG_M5271 + .globl icache_enable +icache_enable: + move.l #0x01000000, %d0 /* Invalidate cache cmd */ + movec %d0, %CACR /* Invalidate cache */ + move.l #(CFG_SDRAM_BASE + 0xc000), %d0 /* Setup cache mask */ + movec %d0, %ACR0 /* Enable cache */ + + move.l #0x80000200, %d0 /* Setup cache mask */ + movec %d0, %CACR /* Enable cache */ + nop + + move.l #(CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END-8), %a1 + moveq #1, %d0 + move.l %d0, (%a1) + rts +#endif + #ifdef CONFIG_M5272 .globl icache_enable icache_enable: @@ -426,13 +444,29 @@ icache_state_access_2: .globl icache_status icache_status: icache_state_access_3: - move.l icache_state, %d0 + move.l #(icache_state), %a0 + move.l (%a0), %d0 rts .data icache_state: .long 0 /* cache is diabled on inirialization */ + .globl dcache_enable +dcache_enable: + /* dummy function */ + rts + + .globl dcache_disable +dcache_disable: + /* dummy function */ + rts + + .globl dcache_status +dcache_status: + /* dummy function */ + rts + /*------------------------------------------------------------------------------*/ .globl version_string diff --git a/lib_m68k/time.c b/lib_m68k/time.c index 6c19059..28d371d 100644 --- a/lib_m68k/time.c +++ b/lib_m68k/time.c @@ -25,288 +25,12 @@ #include <common.h> -#include <asm/mcftimer.h> #include <asm/timer.h> #include <asm/immap.h> -#ifdef CONFIG_M5271 -#include <asm/m5271.h> -#include <asm/immap_5271.h> -#endif - -#ifdef CONFIG_M5272 -#include <asm/m5272.h> -#include <asm/immap_5272.h> -#endif - -#ifdef CONFIG_M5282 -#include <asm/m5282.h> -#endif - -#ifdef CONFIG_M5249 -#include <asm/m5249.h> -#include <asm/immap_5249.h> -#endif - DECLARE_GLOBAL_DATA_PTR; static ulong timestamp; -#if defined(CONFIG_M5282) || defined(CONFIG_M5271) -static unsigned short lastinc; -#endif - -#if defined(CONFIG_M5272) -/* - * We use timer 3 which is running with a period of 1 us - */ -void udelay(unsigned long usec) -{ - volatile timer_t *timerp = (timer_t *) (CFG_MBAR + MCFTIMER_BASE3); - uint start, now, tmp; - - while (usec > 0) { - if (usec > 65000) - tmp = 65000; - else - tmp = usec; - usec = usec - tmp; - - /* Set up TIMER 3 as timebase clock */ - timerp->timer_tmr = MCFTIMER_TMR_DISABLE; - timerp->timer_tcn = 0; - /* set period to 1 us */ - timerp->timer_tmr = - (((CFG_CLK / 1000000) - - 1) << 8) | MCFTIMER_TMR_CLK1 | MCFTIMER_TMR_FREERUN | - MCFTIMER_TMR_ENABLE; - - start = now = timerp->timer_tcn; - while (now < start + tmp) - now = timerp->timer_tcn; - } -} - -void mcf_timer_interrupt(void *not_used) -{ - volatile timer_t *timerp = (timer_t *) (CFG_MBAR + MCFTIMER_BASE4); - volatile intctrl_t *intp = (intctrl_t *) (CFG_MBAR + MCFSIM_ICR1); - - /* check for timer 4 interrupts */ - if ((intp->int_isr & 0x01000000) != 0) { - return; - } - - /* reset timer */ - timerp->timer_ter = MCFTIMER_TER_CAP | MCFTIMER_TER_REF; - timestamp++; -} - -void timer_init(void) -{ - volatile timer_t *timerp = (timer_t *) (CFG_MBAR + MCFTIMER_BASE4); - volatile intctrl_t *intp = (intctrl_t *) (CFG_MBAR + MCFSIM_ICR1); - - timestamp = 0; - - /* Set up TIMER 4 as clock */ - timerp->timer_tmr = MCFTIMER_TMR_DISABLE; - - /* initialize and enable timer 4 interrupt */ - irq_install_handler(72, mcf_timer_interrupt, 0); - intp->int_icr1 |= 0x0000000d; - - timerp->timer_tcn = 0; - timerp->timer_trr = 1000; /* Interrupt every ms */ - /* set a period of 1us, set timer mode to restart and enable timer and interrupt */ - timerp->timer_tmr = - (((CFG_CLK / 1000000) - - 1) << 8) | MCFTIMER_TMR_CLK1 | MCFTIMER_TMR_RESTART | - MCFTIMER_TMR_ENORI | MCFTIMER_TMR_ENABLE; -} - -void reset_timer(void) -{ - timestamp = 0; -} - -ulong get_timer(ulong base) -{ - return (timestamp - base); -} - -void set_timer(ulong t) -{ - timestamp = t; -} -#endif - -#if defined(CONFIG_M5282) || defined(CONFIG_M5271) - -void udelay(unsigned long usec) -{ - volatile unsigned short *timerp; - uint tmp; - - timerp = (volatile unsigned short *)(CFG_MBAR + MCFTIMER_BASE3); - - while (usec > 0) { - if (usec > 65000) - tmp = 65000; - else - tmp = usec; - usec = usec - tmp; - - /* Set up TIMER 3 as timebase clock */ - timerp[MCFTIMER_PCSR] = MCFTIMER_PCSR_OVW; - timerp[MCFTIMER_PMR] = 0; - /* set period to 1 us */ - timerp[MCFTIMER_PCSR] = -#ifdef CONFIG_M5271 - (6 << 8) | MCFTIMER_PCSR_EN | MCFTIMER_PCSR_OVW; -#else /* !CONFIG_M5271 */ - (5 << 8) | MCFTIMER_PCSR_EN | MCFTIMER_PCSR_OVW; -#endif /* CONFIG_M5271 */ - - timerp[MCFTIMER_PMR] = tmp; - while (timerp[MCFTIMER_PCNTR] > 0) ; - } -} - -void timer_init(void) -{ - volatile unsigned short *timerp; - - timerp = (volatile unsigned short *)(CFG_MBAR + MCFTIMER_BASE4); - timestamp = 0; - - /* Set up TIMER 4 as poll clock */ - timerp[MCFTIMER_PCSR] = MCFTIMER_PCSR_OVW; - timerp[MCFTIMER_PMR] = lastinc = 0; - timerp[MCFTIMER_PCSR] = -#ifdef CONFIG_M5271 - (6 << 8) | MCFTIMER_PCSR_EN | MCFTIMER_PCSR_OVW; -#else /* !CONFIG_M5271 */ - (5 << 8) | MCFTIMER_PCSR_EN | MCFTIMER_PCSR_OVW; -#endif /* CONFIG_M5271 */ -} - -void set_timer(ulong t) -{ - volatile unsigned short *timerp; - - timerp = (volatile unsigned short *)(CFG_MBAR + MCFTIMER_BASE4); - timestamp = 0; - timerp[MCFTIMER_PMR] = lastinc = 0; -} - -ulong get_timer(ulong base) -{ - unsigned short now, diff; - volatile unsigned short *timerp; - - timerp = (volatile unsigned short *)(CFG_MBAR + MCFTIMER_BASE4); - now = timerp[MCFTIMER_PCNTR]; - diff = -(now - lastinc); - - timestamp += diff; - lastinc = now; - return timestamp - base; -} - -void wait_ticks(unsigned long ticks) -{ - set_timer(0); - while (get_timer(0) < ticks) ; -} -#endif - -#if defined(CONFIG_M5249) -/* - * We use timer 1 which is running with a period of 1 us - */ -void udelay(unsigned long usec) -{ - volatile timer_t *timerp = (timer_t *) (CFG_MBAR + MCFTIMER_BASE1); - uint start, now, tmp; - - while (usec > 0) { - if (usec > 65000) - tmp = 65000; - else - tmp = usec; - usec = usec - tmp; - - /* Set up TIMER 1 as timebase clock */ - timerp->timer_tmr = MCFTIMER_TMR_DISABLE; - timerp->timer_tcn = 0; - /* set period to 1 us */ - /* on m5249 the system clock is (cpu_clk / 2) -> divide by 2000000 */ - timerp->timer_tmr = - (((CFG_CLK / 2000000) - - 1) << 8) | MCFTIMER_TMR_CLK1 | MCFTIMER_TMR_FREERUN | - MCFTIMER_TMR_ENABLE; - - start = now = timerp->timer_tcn; - while (now < start + tmp) - now = timerp->timer_tcn; - } -} - -void mcf_timer_interrupt(void *not_used) -{ - volatile timer_t *timerp = (timer_t *) (CFG_MBAR + MCFTIMER_BASE2); - - /* check for timer 2 interrupts */ - if ((mbar_readLong(MCFSIM_IPR) & 0x00000400) == 0) { - return; - } - - /* reset timer */ - timerp->timer_ter = MCFTIMER_TER_CAP | MCFTIMER_TER_REF; - timestamp++; -} - -void timer_init(void) -{ - volatile timer_t *timerp = (timer_t *) (CFG_MBAR + MCFTIMER_BASE2); - - timestamp = 0; - - /* Set up TIMER 2 as clock */ - timerp->timer_tmr = MCFTIMER_TMR_DISABLE; - - /* initialize and enable timer 2 interrupt */ - irq_install_handler(31, mcf_timer_interrupt, 0); - mbar_writeLong(MCFSIM_IMR, mbar_readLong(MCFSIM_IMR) & ~0x00000400); - mbar_writeByte(MCFSIM_TIMER2ICR, - MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL7 | - MCFSIM_ICR_PRI3); - - timerp->timer_tcn = 0; - timerp->timer_trr = 1000; /* Interrupt every ms */ - /* set a period of 1us, set timer mode to restart and enable timer and interrupt */ - /* on m5249 the system clock is (cpu_clk / 2) -> divide by 2000000 */ - timerp->timer_tmr = - (((CFG_CLK / 2000000) - - 1) << 8) | MCFTIMER_TMR_CLK1 | MCFTIMER_TMR_RESTART | - MCFTIMER_TMR_ENORI | MCFTIMER_TMR_ENABLE; -} - -void reset_timer(void) -{ - timestamp = 0; -} - -ulong get_timer(ulong base) -{ - return (timestamp - base); -} - -void set_timer(ulong t) -{ - timestamp = t; -} -#endif #if defined(CONFIG_MCFTMR) #ifndef CFG_UDELAY_BASE |