summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorMasahiro Yamada <yamada.masahiro@socionext.com>2016-03-22 16:40:05 (GMT)
committerMasahiro Yamada <yamada.masahiro@socionext.com>2016-03-23 16:45:41 (GMT)
commitd085ecd61b9956cda0d37b89b5c538f54440fe58 (patch)
tree22e43a5f98992e66b1c7caafc4af9bcc6507494d
parentcbbc2d80fc58531c59cadc803717c9d53c9543f1 (diff)
downloadu-boot-d085ecd61b9956cda0d37b89b5c538f54440fe58.tar.xz
ARM: uniphier: switch to raw U-Boot image
Now everything is done to load a raw U-Boot proper image instead of an mkimage-processed one (as far as I tested on NAND, eMMC, NOR). The SPL already knows the load address of the U-Boot proper without parsing its uImage header because the load address is defined by CONFIG_SYS_TEXT_BASE, assuming that the two images are generated from the same build. My main motivation of this switch is to use u-boot-with-spl.bin, a concatenation of u-boot-spl.bin and u-boot.bin. (I wish there were a concatenation of u-boot-spl.bin and u-boot.img...) Anyway, this commit would be useful for one-shot image burn. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
-rw-r--r--doc/README.uniphier22
-rw-r--r--include/configs/uniphier.h9
2 files changed, 22 insertions, 9 deletions
diff --git a/doc/README.uniphier b/doc/README.uniphier
index 47863a4..49045a0 100644
--- a/doc/README.uniphier
+++ b/doc/README.uniphier
@@ -75,12 +75,17 @@ to use your favorite compiler.
Burn U-Boot images to NAND
--------------------------
-Write two files to the NAND device as follows:
+Write the following to the NAND device:
+
- spl/u-boot-spl.bin at the offset address 0x00000000
- - u-boot.img at the offset address 0x00010000
+ - u-boot.bin at the offset address 0x00010000
+
+or
+
+ - u-boot-with-spl.bin at the offset address 0x00000000
If a TFTP server is available, the images can be easily updated.
-Just copy the u-boot-spl.bin and u-boot.img to the TFTP public directory,
+Just copy the u-boot-spl.bin and u-boot.bin to the TFTP public directory,
and then run the following command at the U-Boot command line:
=> run nandupdate
@@ -89,12 +94,17 @@ and then run the following command at the U-Boot command line:
Burn U-Boot images to eMMC
--------------------------
-Write two files to the Boot partition 1 of the eMMC device as follows:
+Write the following to the Boot partition 1 of the eMMC device:
+
- spl/u-boot-spl.bin at the offset address 0x00000000
- - u-boot.img at the offset address 0x00010000
+ - u-boot.bin at the offset address 0x00010000
+
+or
+
+ - u-boot-with-spl.bin at the offset address 0x00000000
If a TFTP server is available, the images can be easily updated.
-Just copy the u-boot-spl.bin and u-boot.img to the TFTP public directory,
+Just copy the u-boot-spl.bin and u-boot.bin to the TFTP public directory,
and then run the following command at the U-Boot command line:
=> run emmcupdate
diff --git a/include/configs/uniphier.h b/include/configs/uniphier.h
index dd7b352..5f3d6b8 100644
--- a/include/configs/uniphier.h
+++ b/include/configs/uniphier.h
@@ -61,6 +61,7 @@
#define CONFIG_SYS_MAX_FLASH_SECT 256
#define CONFIG_SYS_MONITOR_BASE 0
+#define CONFIG_SYS_MONITOR_LEN 0x00080000 /* 512KB */
#define CONFIG_SYS_FLASH_BASE 0
/*
@@ -233,12 +234,12 @@
"mmc erase 0 800 &&" \
"tftpboot u-boot-spl.bin &&" \
"mmc write $loadaddr 0 80 &&" \
- "tftpboot u-boot.img &&" \
+ "tftpboot u-boot.bin &&" \
"mmc write $loadaddr 80 780\0" \
"nandupdate=nand erase 0 0x00100000 &&" \
"tftpboot u-boot-spl.bin &&" \
"nand write $loadaddr 0 0x00010000 &&" \
- "tftpboot u-boot.img &&" \
+ "tftpboot u-boot.bin &&" \
"nand write $loadaddr 0x00010000 0x000f0000\0" \
LINUXBOOT_ENV_SETTINGS
@@ -272,9 +273,11 @@
#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x10000
-#define CONFIG_SYS_UBOOT_BASE 0x60000
+/* subtract sizeof(struct image_header) */
+#define CONFIG_SYS_UBOOT_BASE (0x60000 - 0x40)
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x80
+#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
#define CONFIG_SPL_MAX_FOOTPRINT 0x10000
#endif /* __CONFIG_UNIPHIER_COMMON_H__ */